> Please don't forget that
> other are still getting a lot of use out of 74xx  series of ICs and
related
> devices.

Right on!  And don't forget analog ICs with multiple parts in them, such as
LM324, LM339, etc.

Best regards,
Ivan Baggett
Bagotronix Inc.
website:  www.bagotronix.com


----- Original Message -----
From: "Watnoski, Michael" <[EMAIL PROTECTED]>
To: "'Protel EDA Forum'" <[EMAIL PROTECTED]>
Sent: Monday, November 26, 2001 8:52 AM
Subject: Re: [PEDA] Pin & gate swapping


> This is exactly where it would be useful, on programmable devices.  Pins
> could wired arbitrarily originally by the engineer and then swapped by the
> board designer.  The completed schematic would be returned to engineer for
> software changes after the pins were optimized.  Please don't forget that
> other are still getting a lot of use out of 74xx  series of ICs and
related
> devices.
>
> Michael
>
>
> -----Original Message-----
> From: Tony Karavidas [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, November 21, 2001 2:01 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Pin & gate swapping
>
>
> It doesn't do it as others have already said, and frankly I think it's a
> technology that was useful when 7400 series was more mainstrean, but in
the
> last 10 or so designs I've done, I don't ever recall missing the feature.
> This is attributed to heavy use of DSPs, uCs, PALs, FPGAs, etc. There are
> either no pins to swap, or the pins are programmable and I wire them up as
I
> see fit. I would bet gate and pin swapping is low on their list of things
to
> do.
>
> Tony
>
>
> > -----Original Message-----
> > From: Sean James [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, November 21, 2001 4:48 AM
> > To: Protel EDA Forum
> > Subject: [PEDA] Pin & gate swapping
> >
> >
> > Does anybody know how to get Protel to do gate & pin swapping?
> >
> > Sean James
> > PCB Designer
> > Telecast Fiber Systems, Inc.
> > 102 Grove Street
> > Worcester, MA 01605
> > (TEL) 508.754.4858 x33
> > (FAX) 413.541.6170
>
>
> This message was scanned for viruses on behalf of The Black & Decker
Corporation.

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to