>I was getting a persistent ERC "unconnected passive pin" warning with some 
>pins that were connected through a net label to a bus and from there to a 
>port off-sheet. The net list, however, reported the pins as connected. I 
>finally looked on the Protel Knowledge Base. Sure enough, there is an 
>"issue" known for about a year regarding this, no. 2176.

I am now suspicious about that Knowledge Base report. When I fixed all the 
errors, all unconnected pin warnings were eliminated.

[EMAIL PROTECTED]
Abdulrahman Lomax
Easthampton, Massachusetts USA

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to