Hi, I hope you all had a happy Xmas.
I need to place two large components on a pcb that will actually be on spacers and 
connected to the main board by short wire links. As the items are relatively large 
(one of them is one of those standard 2- or 4-line LCD modules) the footprint for 
these will be quite large yet be basically empty - there will be four spacers, one for 
each corner, plus a short multi-way connector. Is there any way of creating this as a 
component footprint so that it may be correctly moved and position on the main board 
yet still allow Protel to freely place components and tracks in the free area under 
these components?

As the position of the spacers relative to the connector is fairly critical it is 
preferable that this is one single component.

Best Regards
Laurie Biddulph
http://www.elby-designs.com


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to