Hi Owen,

The "nothing in the container" error message would definitely be caused by
the user excluding all volumes. Not the 519, network communication failed,
though. I just quickly tested this with both an immediate and scripted
backup from both Retrospect 4.3 Mac and 5.11 Windows. No problems. Here's
basically all you should be seeing:

+    Normal Backup using Untitled at 8/10/2000 1:01 PM
    To backup set Backup Set D�

    8/10/2000 1:01:26 PM: Connected to Matt/Toshiba
*    Container Matt/Toshiba was empty (had no volumes)
    8/10/2000 1:01:26 PM: Execution completed successfully
    Quit at 8/10/2000 1:01 PM

Sorry, but there's something else going on here. Check out Dantz Tech Note
415 at

<http://www.dantz.com/index.php3?SCREEN=tn415>

and if you can't resolve the 519 with the help of that, e-mail us at
[EMAIL PROTECTED]

Regards,

Matthew Tevenan
Technical Support Specialist
Dantz Development Corporation
925.253.3050 
[EMAIL PROTECTED]

> From: Owen Watson <[EMAIL PROTECTED]>
> Reply-To: "retro-talk" <[EMAIL PROTECTED]>
> Date: Fri, 11 Aug 2000 07:55:55 +1200
> To: "retro-talk" <[EMAIL PROTECTED]>
> Subject: Network communication failed - a hint
> 
> I had a client that was showing up as "nothing in the container" and
> "network communication failed" when you went into the Remotes
> browser. I checked on the client, and what he'd done was put the
> whole hard disk as a private area (by mistake). I checked the docs,
> and a cursory glance didn't reveal this as a posible cause of the
> error messages. Over to you, Dantz!
> -- 
> .................
> Owen Watson
> at home in Wellington, New Zealand
> 
> 
> --
> ----------------------------------------------------------
> To subscribe:    [EMAIL PROTECTED]
> To unsubscribe:  [EMAIL PROTECTED]
> Archives:        <http://list.working-dogs.com/lists/retro-talk/>
> Problems?:       [EMAIL PROTECTED]
> 



--
----------------------------------------------------------
To subscribe:    [EMAIL PROTECTED]
To unsubscribe:  [EMAIL PROTECTED]
Archives:        <http://list.working-dogs.com/lists/retro-talk/>
Problems?:       [EMAIL PROTECTED]

Reply via email to