Keep in mind, though, that Retrospect cannot perform two operations
simultaneously, thus there isn't a way to use both cards at the same time.


Irena Solomon
Dantz Technical Support

> Yes, it is possible.  Since the AppleTalk can be on a different
> interface than the TCP/IP, just set the AppleTalk control panel to
> use internal and the TCP/IP to use the card.
>> I was just wondering  - this is just a thought. Would it be possible to have
>> retrospect backing up through two netwrok cards - that is my 7200 has two
>> etherenet cards the n built 10 base and an additional 100 base network -
>> woudl it be possible to have retrospect work through both, backing up the
>> slow appletalk network clients through the 10 base onto tape and the fast
>> 100base etherenet card taking care of my dtp clients straight onto a fast
>> scsi disk drive? Is that possible?
>> Regards, and thanks
>> David

To subscribe:    [EMAIL PROTECTED]
To unsubscribe:  [EMAIL PROTECTED]
Archives:        <>
Search:  <>

For urgent issues, please contact Dantz technical support directly at
[EMAIL PROTECTED] or 925.253.3050.

Reply via email to