Thanks for your help
David
> From: Irena Solomon <[EMAIL PROTECTED]>
> Reply-To: "retro-talk" <[EMAIL PROTECTED]>
> Date: Fri, 05 Jan 2001 12:21:35 -0800
> To: retro-talk <[EMAIL PROTECTED]>
> Subject: Re: best way to run retrospect with multiple stations on network
>
> Keep in mind, though, that Retrospect cannot perform two operations
> simultaneously, thus there isn't a way to use both cards at the same time.
>
> Regards,
>
> Irena Solomon
> Dantz Technical Support
> 925.253.3050
> ++++++++
>
>> Yes, it is possible. Since the AppleTalk can be on a different
>> interface than the TCP/IP, just set the AppleTalk control panel to
>> use internal and the TCP/IP to use the card.
>>
>>> I was just wondering - this is just a thought. Would it be possible to have
>>> retrospect backing up through two netwrok cards - that is my 7200 has two
>>> etherenet cards the n built 10 base and an additional 100 base network -
>>> woudl it be possible to have retrospect work through both, backing up the
>>> slow appletalk network clients through the 10 base onto tape and the fast
>>> 100base etherenet card taking care of my dtp clients straight onto a fast
>>> scsi disk drive? Is that possible?
>>>
>>> Regards, and thanks
>>> David
>
>
>
> --
> ----------------------------------------------------------
> To subscribe: [EMAIL PROTECTED]
> To unsubscribe: [EMAIL PROTECTED]
> Archives: <http://list.working-dogs.com/lists/retro-talk/>
> Search: <http://www.mail-archive.com/retro-talk%40latchkey.com/>
>
> For urgent issues, please contact Dantz technical support directly at
> [EMAIL PROTECTED] or 925.253.3050.
--
----------------------------------------------------------
To subscribe: [EMAIL PROTECTED]
To unsubscribe: [EMAIL PROTECTED]
Archives: <http://list.working-dogs.com/lists/retro-talk/>
Search: <http://www.mail-archive.com/retro-talk%40latchkey.com/>
For urgent issues, please contact Dantz technical support directly at
[EMAIL PROTECTED] or 925.253.3050.
