Dave, Well done and informative. Looks like it would be a good Wiki chapter. VBG
Greg Elems Reno NV --- In [email protected], "ctxmf74" <[EMAIL PROTECTED]> wrote: > Hi Earl, I put some photos in the photo section in a new album > called Assembling KD 802 couplers. The trick is to undercut the slot > on the end of a piece of scrap wood to the correct width and taper so > you can slide the trip pin in and place the box under it as shown. > Holding the spring by the next to last coil with tweezers is more > secure than trying to use a screw driver or knife blade. If you don't > want to tack the lids on with a soldering iron you can carefully hold > the lid in place and screw the coupler to the car but if you ever > remove it and forget that it is not tacked it will come apart. Some > boxes hold with just the pressure of snapping on the lid and will stay > together if you are carefull. > If you can't see the photos in the photo section let me know and > I'll email them direct to you....dave > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
