--- In [email protected], "pickycat95" <pickycat95@...> wrote:
>
> Kits with much more expensive molds than flats have been produced in S for
> far less than $200/unit.
Shapeways parts are not kits in the typical sense, they are one off parts
to use as masters to cast the kits so the $200 represents all the hand work
that would go into creating the master on the workbench. The $200 master cost
would be divided among the amount of cars cast from the part, 10 cars would
make it $20 per car or 20 cars would cost $10 per car for instance. The catch
is one has to know how to use the software to draw up the parts for shapeways
to print them....DaveBranum
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
