Re: [Users] which file system for shared disk?
2013-7-11 1:43, Itamar Heim: On 07/10/2013 05:33 PM, Piotr Szubiakowski wrote: The way that oVirt manage storage domains accessed via FC is very smart. There is separate logical volume for each virtual disk. But I think that logical volume at the same time could be "touched" only by one host. Is it possible that two host access read/write the same logical volume and there is no data corruption? hence a shared disk over block storage using LVM must be pre-allocated, so no LV changes (lv extend) would be needed. By using "pre-allocated" here, even for qcow on KVM? If it is pre-allocated, there is no benefit to use qcow. (also, it cannot have snapshots, since it would become qcow) Why it can not have snapshots? I think qcow on the block device can also have snapshots. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Disk move when VM is running problem
From the email above, 'lvs' shows that the "d477fcba-2110-403e-93fe-15565aae5304" is not physically migrated to the target storage domain "14b5167c-5883-4920-8236-e8905456b01f". It means the migration failed. I think you may modify the disk back to the old storage domain in the db to clear the side-effect of the migration failure. 2013-4-19 0:20, Gianluca Cecchi: Can I try to directly modify the db telling it that the disk is lv ?? What to choose. ..? part of vg 14b5167c-5883-4920-8236-e8905456b01f ? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Support for live snapshot deletion
Do you mean snapshot live merging support in oVirt? 2013-5-11 22:31, Marc Seward: Hi all, Currently,there is support for live snapshots,which is a cool feature.Are there any plans to provide support for deletion of snapshots without shutting down a guest? Thanks, Marc ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Lun snapshots by a san
pierre Labanowski: Hello everybody, I have a question, or more precisely information or best practice. I use oVirt 3.1 with an attachment on fiber channel on my SAN. Makes it even the San snapshots that are replicated on a remote site. it's a procedure for adding a new "Storage" Domain to another Data Centers (oVirt) in order to recover the state of a VM snapshoted by the SAN? If I understand correctly, the remote SAN of you can snapshot the storage domain(physical lun in the SAN) lively. And you hope to recover the storage domain with the previous snapshot stored in the SAN. So you create a new "storage" domain for another data center and restart the VM from the newstorage domain. I am not sure if the VM disks in the storage domain snapshot is in consistent date if the SAN snapshot the VM in a running state. I think the VM OS should be notified and make sure it is in consistent state before the SAN can do the snapshot, also the VM OS should be notified with the finish of the snapshotting.. I've read the documentation on Disaster Recovery but it's for the site-to-site failover (i don't have dual architecture of ovirt) while my demand here is for the state recovered a current domain. And only to export the VM(snapshoted by a san) for restore in the current storage (production). thank you Pierre ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] virt-v2v
You can get the mount path from the admin portal. system--->storage--->select a storage domain--->In the general tab page, you can have the nfs export path. supo...@logicworks.pt: well, I run the virt-v2v from the engine server, if I do a showmount -e it will show me the iso domain. The NFS/export storage is located at a NAS on the LAN, so I think I need the path to that NAS, how can I found it? *De: *"Jonathan Horne" *Para: *supo...@logicworks.pt, Users@ovirt.org *Enviadas: *Quarta-feira, 17 Abril, 2013 20:33:29 *Assunto: *RE: virt-v2v I imagine “showmount -e” will show you the NFS path. I recently imported some VMs from KvM, and my syntax was like this: virt-v2v -i libvirt -ic qemu+ssh://root@source-server/system -o rhev -os ovirt-exportnfs-server:/opt/nfs -of qcow2 -oa sparse -n ovirtmgmt exactname-of-kvm-vm jonathan *From:*users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *On Behalf Of *supo...@logicworks.pt *Sent:* Wednesday, April 17, 2013 12:06 PM *To:* Users@ovirt.org *Subject:* [Users] virt-v2v Hi, Im trying to migrate a VM from a qemu kvm server. I'm not sure of the correct syntax: virt-v2v -ic qemu+ssh://root@/server_ip_addr//system -op /export_domain/ --bridge ovirtmgmt /kvm_vm_name/ I have setup a NFS/export storage on the manager, for the export domain. How can I find the correct path of the export_domain? regards -- Jose Ferradeira http://www.logicworks.pt This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. I imagine “showmount -e” will show you the NFS path. I recently imported some VMs from KvM, and my syntax was like this: virt-v2v -i libvirt -ic qemu+ssh://root@source-server/system -o rhev -os ovirt-exportnfs-server:/opt/nfs -of qcow2 -oa sparse -n ovirtmgmt exactname-of-kvm-vm jonathan From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of supo...@logicworks.pt Sent: Wednesday, April 17, 2013 12:06 PM To: Users@ovirt.org Subject: [Users] virt-v2v Hi, Im trying to migrate a VM from a qemu kvm server. I'm not sure of the correct syntax: virt-v2v -ic qemu+ssh://root@server_ip_addr/system -op export_domain --bridge ovirtmgmt kvm_vm_name I have setup a NFS/export storage on the manager, for the export domain. How can I find the correct path of the export_domain? regards -- Jose Ferradeira http://www.logicworks.pt This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VDI using oVirt
oVirt project was initiated from virtual desktop project. It supported an open desktop protocol SPICE from the beginning which gave a nice 2D performance driven by the various graphics drivers on different OSs. Do you have a target in mind? Like what is ratio of virtual desktops per physical servers? Does the virtual desktop support support video playback? Do you need to support other client protocol besides SPICE? 2013-4-10 5:34, John Baldwin: Any good guides on setting up VDI using oVirt??? John Baldwin Sr. UnIx System Admin, Clearwater, FL ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] SPM is always contending - resolved
Which type of storage domain was in your engine? NFS? iSCSI? or other types? Andy Singleton: Problem resolved. The clue was obviously in the engine.log (FSCK error) but I couldn't see what was needing an fsck or why this would prevent the storage of every vm from being mounted. I still dont understand the whole of the ovirt storage mechanism. More information was in the node vdsm.log - It pointed here. /dev/mapper/9ed5a2fe--ae4c--433f--a15f--2c710ed5156f-master One fsck later problem resolved. Thanks Andy ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] way to edit iSCSI storage domain?
Yuriy Demchenko: I guess you misunderstood me I'm going to try this scheme: |STORAGE| FC / \ |SERV1/tgtd||SERV2/tgtd| iSCSI \ / |ethernet switches| iSCSI |blades|blades|blades| I am still confused if SERV1/SERV2 are used as a iSCSI bridge to the storage only or used as VDSM host also? If they are used as VDSM host and both of them can have FC channel to the storage, why not create FC storage domain for them instead of iSCSI domain? serv1/serv2 - connectivity isnt a problem, multipathed FC scheme, all good. Same lun accessible for both servers and than exported via tgtd to iSCSI: with different target names ("iqn.2013-03.serv1:store", "iqn.2013-03.serv2:store"), but same vendor_id, product_id, scsi_sn, scsi_id. That way client can login into both targets and see lun as multipathed device. And multipath failover scheme (via custom config with path_grouping_policy=failover for corresponding vendor_id/product_id) is on blades-clients - so they use only one target at time (no round-robin or similar stuff), but with ability to switch to another target in case one of serv1/serv2 is down. However, in my case "serv2" would not be available during oVirt setup (need to setup ovirt and virtual servers to move stuff first), so i cant enter both targets on storage domain initialization - that's why I'm asking if there's any way to edit storage domain details after initialization without destroying it (maybe directly via sql or something). Yuriy Demchenko On 04/02/2013 06:26 PM, Shu Ming wrote: I am not sure if the multipathd can recognize the FC path to the storage when the second server is available and regards it as the same as the iSCSI path used before. If it is not, I think the device under /dev/mapper may change when you cut the iSCSI path off and then enable FC path. That will definitely corrupt the meta data of the volume group which the storage domain is sitting on and the storage domain will be corrupted finally. -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail:shum...@cn.ibm.com orshum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] way to edit iSCSI storage domain?
Yuriy Demchenko: Hi, is there any way to edit iSCSI storage domain: change/add targets ? (lun, id, sn and actual content wouldn't be affected) Without VM export/import process - downtime should be as little as possible. I'm researching possibility to use oVirt in env where I have only FC storage, connected to 2 servers (and sadly, second server will be available later, hence my question about changing targets in oVirt) and bunch of blades, on which i would like to run virtualization (no fc storage connectivity) - so idea is to share storage via iSCSI/tgtd and use multipathd with failover mode to protect from storage I am not sure if the multipathd can recognize the FC path to the storage when the second server is available and regards it as the same as the iSCSI path used before. If it is not, I think the device under /dev/mapper may change when you cut the iSCSI path off and then enable FC path. That will definitely corrupt the meta data of the volume group which the storage domain is sitting on and the storage domain will be corrupted finally. corruption. -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Does anyone run the engine on a VM in the cluster itself?
Ernest Beinrohr: I have to maintan a separate VM environment just for the engine. If it were running on one of the hypervisors, how can I start it if the engine itself is off? You can use virsh to manage the VM if you know the user and password to libvirtd. The default SASL user: vdsm@ovirt The default password: shibboleth thanks. -- Ernest Beinrohr, AXON PRO Ing <http://www.beinrohr.sk/ing.php>, RHCE <http://www.beinrohr.sk/rhce.php>, RHCVA <http://www.beinrohr.sk/rhce.php>, LPIC <http://www.beinrohr.sk/lpic.php>, +421-2--6241-0360 , +421-903--482-603 icq:28153343, skype:oernii-work , jabber:oer...@jabber.org "The bureaucracy is expanding to meet the needs of the expanding bureaucracy." -- Oscar Wilde ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] High Availability
Tim Hildred: If one host is down because of network interrupt or power failure, the engine should know how many HA VMs are down and find out the VM images on the storage domain to start the VM instances on another host in the cluster. Why do we need power manager to be configured? Power management allows the Manager to start highly available virtual machines on new hosts without worrying that virtual machine hard disk images will be corrupted. Imagine a situation in which the Manager cannot communicate with the host a highly available virtual machine is running on. If the host is still running as expected, and the virtual machine is also still running, the virtual machine is writing to its hard disk image. Tim, Thanks for clarification. That is what I expected. If the Manager starts that virtual machine on another host in the cluster, then both virtual machine instances will try and write to the disk image, and cause hard disk corruption. Power management lets the Manager be sure that only one instance of the highly available virtual machine is running, because the instance on the host the Manager couldn't communicate cannot survive a host reboot. Tim Hildred, RHCE Content Author II - Engineering Content Services, Red Hat, Inc. Brisbane, Australia Email: thild...@redhat.com Internal: 8588287 Mobile: +61 4 666 25242 IRC: thildred - Original Message - From: "Shu Ming" To: "Tim Hildred" Cc: d...@redhat.com, Users@ovirt.org Sent: Monday, March 18, 2013 1:31:12 PM Subject: Re: [Users] High Availability Tim, Thanks for your information. I am not sure why we need power management to be configured for the hosts running HA virtual machines. We only need a method to check the VM or host status and a method to restart the VM instances with existing VM images on another host. Is it required to force powering down the failing host forever to make sure the failing host will not come back to live again? * Power management must be configured for the hosts running the highly available virtual machines. * The host running the highly available virtual machine must be part of a cluster which has other available hosts. * The destination host must be running. * The source and destination host must have access to the data domain on which the virtual machine resides. * The source and destination host must have access to the same virtual networks and VLANs. * There must be enough CPUs on the destination host that are not in use to support the virtual machine's requirements. * There must be enough RAM on the destination host that is not in use to support the virtual machine's requirements. Tim Hildred: You might also find this helpful: https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Virtualization/3.1/html/Administration_Guide/High_availability_considerations.html The topics before and after it explain a bit more about high availability. Tim Hildred, RHCE Content Author II - Engineering Content Services, Red Hat, Inc. Brisbane, Australia Email: thild...@redhat.com Internal: 8588287 Mobile: +61 4 666 25242 IRC: thildred - Original Message - From: "Dafna Ron" To: supo...@logicworks.pt Cc: Users@ovirt.org Sent: Monday, March 18, 2013 4:46:51 AM Subject: Re: [Users] High Availability I think that there is some confusion here so I will explain what are the configurations for fail-over. power management will reboot your host if a connectivity issue is detected so all your vm's will be killed. resilience policy will allow you to choose vm migration policy during a host failure and its configured in the cluster level (clusters -> select cluster -> general sub tab -> edit policy) High Availability is configured only for servers type vm's and what it does is re-run the vm in case the pid of the vm is killed (so most commonly, if you have power management configured, and the host is rebooted, the vm will start automatically on a different host). so it really depends what you want. if you want vm migration than look into cluster policy, if you want a specific vm to always be up and you don't care about the other vm's than configure power management and a HA vm. it really depends on what you need. On 03/17/2013 07:15 PM, supo...@logicworks.pt wrote: Is it Mandatory to have power manamement enabled? if yes what equipment do you recommend to use with it? Regards Jose - Mensagem original - De: "René Koch" Para: supo...@logicworks.pt , Users@ovirt.org Enviadas: Domingo, 17 Março, 2013 16:47:41 Assunto: RE: [Users] High Availability Hi, You have to configure power management to make high availability working and mark the vms high availability checkbox... Regards, René -Original message- From:supo...@logicworks.pt Sent: Sunday 17th March 2013 17:28 To: Users@ovirt.org Subject: [Users] High Availability Wha
Re: [Users] High Availability
Tim, Thanks for your information. I am not sure why we need power management to be configured for the hosts running HA virtual machines. If one host is down because of network interrupt or power failure, the engine should know how many HA VMs are down and find out the VM images on the storage domain to start the VM instances on another host in the cluster. Why do we need power manager to be configured? We only need a method to check the VM or host status and a method to restart the VM instances with existing VM images on another host. Is it required to force powering down the failing host forever to make sure the failing host will not come back to live again? * Power management must be configured for the hosts running the highly available virtual machines. * The host running the highly available virtual machine must be part of a cluster which has other available hosts. * The destination host must be running. * The source and destination host must have access to the data domain on which the virtual machine resides. * The source and destination host must have access to the same virtual networks and VLANs. * There must be enough CPUs on the destination host that are not in use to support the virtual machine's requirements. * There must be enough RAM on the destination host that is not in use to support the virtual machine's requirements. Tim Hildred: You might also find this helpful: https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Virtualization/3.1/html/Administration_Guide/High_availability_considerations.html The topics before and after it explain a bit more about high availability. Tim Hildred, RHCE Content Author II - Engineering Content Services, Red Hat, Inc. Brisbane, Australia Email: thild...@redhat.com Internal: 8588287 Mobile: +61 4 666 25242 IRC: thildred - Original Message - From: "Dafna Ron" To: supo...@logicworks.pt Cc: Users@ovirt.org Sent: Monday, March 18, 2013 4:46:51 AM Subject: Re: [Users] High Availability I think that there is some confusion here so I will explain what are the configurations for fail-over. power management will reboot your host if a connectivity issue is detected so all your vm's will be killed. resilience policy will allow you to choose vm migration policy during a host failure and its configured in the cluster level (clusters -> select cluster -> general sub tab -> edit policy) High Availability is configured only for servers type vm's and what it does is re-run the vm in case the pid of the vm is killed (so most commonly, if you have power management configured, and the host is rebooted, the vm will start automatically on a different host). so it really depends what you want. if you want vm migration than look into cluster policy, if you want a specific vm to always be up and you don't care about the other vm's than configure power management and a HA vm. it really depends on what you need. On 03/17/2013 07:15 PM, supo...@logicworks.pt wrote: Is it Mandatory to have power manamement enabled? if yes what equipment do you recommend to use with it? Regards Jose - Mensagem original - De: "René Koch" Para: supo...@logicworks.pt, Users@ovirt.org Enviadas: Domingo, 17 Março, 2013 16:47:41 Assunto: RE: [Users] High Availability Hi, You have to configure power management to make high availability working and mark the vms high availability checkbox... Regards, René -Original message- From:supo...@logicworks.pt Sent: Sunday 17th March 2013 17:28 To: Users@ovirt.org Subject: [Users] High Availability What should I need to configure to put HA working? I mean, when a host broke all the VM automatically move to another host. Do I need to have Power management enabled? Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Dafna Ron ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Export domain
So you have a block device in NFS server to be extended from 200 to 50GB?I think you should extend both the block device and the file system on the block device in the server side. To oVirt, it doesn't save the size in storage domain' meta-data and I believe the size is only stored in the engine server. The only issue is before the engine refresh its metadata in the next time, there is a window with the meta-data out of sync. Please let us know if it is successful. Jonathan Horne: What would happen if the export domain (via NFS) was extended (say, while the server was doing a reboot?) id like to extend the space of my export domain from 200 to 500GB (with lvm commands). How will ovirt react to finding the size of the export domain changed? Pleased or unpleased? Thanks, jonathan This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Export domain
Dafna Ron: ovirt should not react in any way :) the size should be updated by queries that are sent to vdsm on domains status. I think vdsm domains do have their own meta-data except the lvm or posix file system meta data. If you want to be extra careful you can always put the export domain in maintenance before the extend :) If the export domain come back to life, I think the domain meta data should be invalidated after the extend. On 03/13/2013 09:45 PM, Jonathan Horne wrote: What would happen if the export domain (via NFS) was extended (say, while the server was doing a reboot?) id like to extend the space of my export domain from 200 to 500GB (with lvm commands). How will ovirt react to finding the size of the export domain changed? Pleased or unpleased? Thanks, jonathan This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] management server very slow lately
Did you use IE or firefox? I found firefox was much faster than IE connecting the engine server. Jonathan Horne : Hello, lately my manager server web interface is extremely sluggish. Perhaps the server is ready for a reboot? My management server is also the hosts of my NFS export and ISO mounts. Is there a prescribed method for rebooting when I am also providing NFS services from the management server? My assumption is that aside from NFS, I should be able to reboot the management serve and the nodes and virtual machines will be fine in the mean time? Thanks, jonathan This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] 关于ovirt 3.2支持glusterfs问题
Let me help to translate those characters below. --- I installed oVirt 3.2 on my system and used "engine-setup" to create a new engine server. In the question process of "engine-setup", the different answeres for storage type made the different results. If "glusterfs" type was chosen, the data center was not created and the storage domain could not be added neither. If "both" was chosen, there was no gluster-fs type when adding a data center, only other types listed. If "posix compliant fs" was chosen, adding glusterfs volume failure was shown in the WEB UI. However, the gluster volume was successfully created in the node shown by "gluster volume info". Any clues? --- Dave Neary: Hi, I'm sorry, this is an English language mailing list, and I do not speak Chinese. Google translate suggests that your question relates to an installation issue - you installed oVirt 3.2, ran engine-setup, selected a POSIX FS type data center, and do not see any storage domain. However, the Gluster volume is visible in the "node" view. Is that correct? Have you had any issues using the Gluster volume outside oVirt? I hope someone can help you with your query! Thanks, Dave. On 02/28/2013 06:16 AM, 胡阳阳 wrote: 您好! 我安装的ovirt版本为3.2。使用engine-setup设置时如果存储选择glusterfs,打 开WEB UI之后无法看到data center,也无法增加storage domain。如果选择 both,增加data center的时候没有type项没有gluster fs,只有以下几个。 选择posix compliant fs之后,增加glusterfs的volume在WEB UI上提示不成功, 但是在node上使用gluster volume info查看已成功创建。 请问一下这个问题如果解决。 谢谢! 以下为我的版本信息 贵州沃尔康科技有限公司 系统集成部 胡阳阳 地址:贵州省贵阳市南明区中创联合大厦6楼D座 邮箱:huyangy...@wolk-tech.com <mailto:huyangy...@wolk-tech.com> 手机:18798828131 电话:0851-5989268 本邮件及其附件含有沃尔康公司的保密信息,仅限于发送给上面地址中列出的个人 或群组。禁止任何其他人以任何形式使用(包括但不限于全部或部分地泄露、复 制、或散发)本邮件中的信息。如果您错收了本邮件,请您立即电话或邮件通知发 件人并删除本邮件! This e-mail and its attachments contain confidential information from WOLK, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] 关于ovirt 3.2支持glusterfs问题
Let me help to translate those characters below. --- I installed oVirt 3.2 on my system and used "engine-setup" to create a new engine server. In the question process of "engine-setup", the different answeres for storage type made the different results. If "glusterfs" type was chosen, the data center was not created and the storage domain could not be added neither. If "both" was chosen, there was no gluster-fs type when adding a data center, only other types listed. If "posix compliant fs" was chosen, adding glusterfs volume failure was shown in the WEB UI. However, the gluster volume was successfully created in the node shown by "gluster volume info". Any clues? --- Dave Neary: Hi, I'm sorry, this is an English language mailing list, and I do not speak Chinese. Google translate suggests that your question relates to an installation issue - you installed oVirt 3.2, ran engine-setup, selected a POSIX FS type data center, and do not see any storage domain. However, the Gluster volume is visible in the "node" view. Is that correct? Have you had any issues using the Gluster volume outside oVirt? I hope someone can help you with your query! Thanks, Dave. On 02/28/2013 06:16 AM, 胡阳阳 wrote: 您好! 我安装的ovirt版本为3.2。使用engine-setup设置时如果存储选择glusterfs,打 开WEB UI之后无法看到data center,也无法增加storage domain。如果选择 both,增加data center的时候没有type项没有gluster fs,只有以下几个。 选择posix compliant fs之后,增加glusterfs的volume在WEB UI上提示不成功, 但是在node上使用gluster volume info查看已成功创建。 请问一下这个问题如果解决。 谢谢! 以下为我的版本信息 贵州沃尔康科技有限公司 系统集成部 胡阳阳 地址:贵州省贵阳市南明区中创联合大厦6楼D座 邮箱:huyangy...@wolk-tech.com <mailto:huyangy...@wolk-tech.com> 手机:18798828131 电话:0851-5989268 本邮件及其附件含有沃尔康公司的保密信息,仅限于发送给上面地址中列出的个人 或群组。禁止任何其他人以任何形式使用(包括但不限于全部或部分地泄露、复 制、或散发)本邮件中的信息。如果您错收了本邮件,请您立即电话或邮件通知发 件人并删除本邮件! This e-mail and its attachments contain confidential information from WOLK, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt + Spice + VDI
Mohsen Saeedi: Hi I want to know, we are force to install one windows per user? does spice can provide a multi remote connection to a single windows XP machine? I want to install one windows XP as virtual desktop and then share it with more than one users.is it possible in now or in the futures? I think you are talking about mutiple sessions in one windows desktop servers.I believe you must use RDP protocol to access those sessions. Spice is for one window desktop per user. Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Configure spice plugin for wan
Itamar Heim: On 26/02/2013 15:13, Gianluca Cecchi wrote: I remember someone talking about an option of setting spice to operate over wan, in the sense that this way automatically it would disable effects in windows 7 VM, ecc... I don't remember if this is a VM parameter, hook or other... Or if this is an option available only in RHEV-M iirc, it's a checkbox in the user portal to pass the wan option flag to spice. Does this checkbox mean there are some optimization for spice on wan? How does the checkbox affect the remote video stream support? It seems that spice protocol waste many cycles on mjpeg encoding and decoding for video stream. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Install problems
Bug was filed here. https://bugzilla.redhat.com/show_bug.cgi?id=908617 It seems that it is a openjdk bug. https://community.jboss.org/message/796347?_sscc=t#796347 Jonathan Archer: Hi All, Just wondering if anyone could shed some light on an issue I'm seeing? I've followed the instructions on the wiki to try and get an ovirt setup running. (F17 minimal, updated, add repo, yum install ovirt-engine, engine-setup) All that seemed to go OK, and the database creation etc seemed to be fine, however starting the ovirt-engine service seems to have failed to start, was getting a http 503 error on trying the web interface. Looking deeper into it, it seems that jboss-as seems to be failing to start with some errors around logging. when I run systemctl start ovirt-engine.service i get the following in the logs: Feb 6 14:33:52 host1 engine-service.py[25212]: Started engine process 25213. Failed to configure handler FILE on Logger '' in context org.jboss.logmanager.LogContext@afc824e: Handler FILE has no class name Exception in thread "main" java.lang.ExceptionInInitializerError at org.jboss.as.server.Main.main(Main.java:73) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:601) at org.jboss.modules.Module.run(Module.java:260) at org.jboss.modules.Main.main(Main.java:291) Caused by: java.lang.IllegalStateException: The LogManager was not properly installed (you must set the "java.util.logging.manager" system property to "org.jboss.logmanager.LogManager") at org.jboss.logmanager.Logger.getLogger(Logger.java:60) at org.jboss.logmanager.log4j.BridgeRepositorySelector.(BridgeRepositorySelector.java:42) ... 7 more Feb 6 14:33:53 host1 systemd[1]: ovirt-engine.service: main process exited, code=exited, status=1 Feb 6 14:33:53 host1 engine-service.py[25230]: The engine PID file "/var/run/ovirt-engine.pid" contains 25213, but that process doesn't exist. Feb 6 14:33:53 host1 systemd[1]: ovirt-engine.service: control process exited, code=exited status=1 Feb 6 14:33:53 host1 systemd[1]: Unit ovirt-engine.service entered failed state. Any ideas? Thanks Jon ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] snapshot taken while live VM operates cause unresponsive hypervisor behavior
The libvirt and qemu version in the VDSM host may help the debugging. Alexandru Vladulescu: Hi, Using 3.1.0-3.19 from dreyou's repo on Centos 6.3 version, running multiple VM on the hypervisor node and attempting to take a snapshot from one of the running VMs generates errors for VDSM daemon as show below: / //[root@hyper02 ~]# vdsClient -s 0 list// //Traceback (most recent call last):// // File "/usr/share/vdsm/vdsClient.py", line 2275, in // //code, message = commands[command][0](commandArgs)// // File "/usr/share/vdsm/vdsClient.py", line 280, in do_list// //response = self.s.list(True, vms)// // File "/usr/lib64/python2.6/xmlrpclib.py", line 1199, in __call__// //return self.__send(self.__name, args)// // File "/usr/lib64/python2.6/xmlrpclib.py", line 1489, in __request// //verbose=self.__verbose// // File "/usr/lib64/python2.6/xmlrpclib.py", line 1253, in request// //return self._parse_response(h.getfile(), sock)// // File "/usr/lib64/python2.6/xmlrpclib.py", line 1392, in _parse_response// //return u.close()// // File "/usr/lib64/python2.6/xmlrpclib.py", line 838, in close// //raise Fault(**self._stack[0])// //Fault: :cannot marshal None unless allow_none is enabled">/ Paste from ovirt admin GUI log: /2013-Feb-07, 15:29:59 VM ipa01 is down. Exit message: User shut down// //2013-Feb-07, 15:29:34 Migration failed due to Error: Fatal error during migration (VM: ipa01, Source Host: Hyper02).// //2013-Feb-07, 15:29:32 Starting migration of VM ipa01 from Host Hyper02 to Host Hyper01 (User: admin@internal.).// //2013-Feb-07, 15:29:10 Migration failed due to Error: Fatal error during migration (VM: ipa01, Source Host: Hyper02).// //2013-Feb-07, 15:29:10 Migration failed due to Error: Fatal error during migration (VM: ipa01, Source Host: Hyper02). Trying to migrate to another Host.// //2013-Feb-07, 15:29:08 Starting migration of VM ipa01 from Host Hyper02 to Host Hyper01 (User: admin@internal.).// //2013-Feb-07, 15:24:58 Detected new Host Hyper02. Host state was set to Up.// //2013-Feb-07, 15:24:53 Host Hyper02 is initializing. Message: Recovering from crash or Initializing// //2013-Feb-07, 15:22:18 VM ipa01 was resumed by admin@internal (Host: Hyper02).// //2013-Feb-07, 15:22:18 VM ipa01 was resumed by admin@internal (Host: Hyper02).// //2013-Feb-07, 15:20:43 Snapshot [initial installation][after ipa server installation] creation for VM ipa01 has been completed.// //2013-Feb-07, 15:20:43 VM ipa01 has paused due to unknown storage error./ Looking through htop command could see that VM were still running and responsive but any vdsclient command failed with the upper code paste I have given. Solution here was to connect to each VM, shut it down and restart vdsmd and power it up again. There's no problem with the storage size as it has aprox 800GB free of space and running through NFS. All nfs mount points were running okay at that time. After the VM has been snapshoot-ed went into pause mode and had to un-pause it from GUI, but the VM was still responsive through network and operations. Has anybody seen something related to this by now or it's just related to 3.1 version ? Mentioning the fact that I did a research on the similar mailing list topics and could not find something related to this error. I would happily provide logs if needed. Regards, Alex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Fwd: [Engine-devel] Latest open jdk and JBOSS
Have you tried this? https://admin.fedoraproject.org/updates/java-1.7.0-openjdk-1.7.0.9-2.3.5.fc18.1 Jonathan Archer: I can confirm this resolved my issues I was seeing... Jon On 06/02/13 14:36, Jonathan Archer wrote: I've literally just posted with regard to seeing this same issue... thanks Jon On 06/02/13 14:34, Roy Golan wrote: FYI Original Message Subject:[Engine-devel] Latest open jdk and JBOSS Date: Wed, 06 Feb 2013 08:40:01 -0500 From: Alexander Wels Reply-To: aw...@redhat.com To: engine-de...@ovirt.org Just an FYI there is an issue with the latest openjdk and JBOSS which causes JBOSS to NOT start. Details can be found here: https://community.jboss.org/message/796347#796347 I did upgrade yesterday and I am having the exact same issue. For now do not upgrade your open jdk to the latest version. Alexander. ___ Engine-devel mailing list engine-de...@ovirt.org http://lists.ovirt.org/mailman/listinfo/engine-devel ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Install problems
er.getLogger(Logger.java:60) at org.jboss.logmanager.log4j.BridgeRepositorySelector.(BridgeRepositorySelector.java:42) ... 7 more Feb 6 14:33:53 host1 systemd[1]: ovirt-engine.service: main process exited, code=exited, status=1 Feb 6 14:33:53 host1 engine-service.py[25230]: The engine PID file "/var/run/ovirt-engine.pid" contains 25213, but that process doesn't exist. Feb 6 14:33:53 host1 systemd[1]: ovirt-engine.service: control process exited, code=exited status=1 Feb 6 14:33:53 host1 systemd[1]: Unit ovirt-engine.service entered failed state. Any ideas? Thanks Jon ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VM migrations failing
Hi, Just curiously, did you install oVirt packages from http://resources.ovirt.org/releases/nightly/rpm/EL/6/noarch/ ? And there is no stable oVirt release 3.1/3.2 for RHEL. Dead Horse: The nodes are EL6.3 based. Currently installed libvirt packages: libvirt-lock-sanlock-0.9.10-21.el6_3.8.x86_64 libvirt-cim-0.6.1-3.el6.x86_64 libvirt-0.9.10-21.el6_3.8.x86_64 libvirt-python-0.9.10-21.el6_3.8.x86_64 libvirt-client-0.9.10-21.el6_3.8.x86_64 and qemu packages: qemu-kvm-0.12.1.2-2.295.el6_3.10.x86_64 qemu-kvm-tools-0.12.1.2-2.295.el6_3.10.x86_64 qemu-img-0.12.1.2-2.295.el6_3.10.x86_64 Thus my presumption here given the above is that virDomainMigrateToURI2 has not yet been patched and/or back-ported into the EL6.x libvirt/qemu? virDomainMigrateToURI2() is supported in libvirt-0.9.10, I am not sure if qemu-kvm-0.12.1.2 supports it. /var/log/libvirtd.log may help to verify this assumption - DHC On Wed, Jan 30, 2013 at 1:28 PM, Dan Kenigsberg <mailto:dan...@redhat.com>> wrote: On Wed, Jan 30, 2013 at 11:04:00AM -0600, Dead Horse wrote: > Engine Build --> Commit: 82bdc46dfdb46b000f67f0cd4e51fc39665bf13b > VDSM Build: --> Commit: da89a27492cc7d5a84e4bb87652569ca8e0fb20e + patch > --> http://gerrit.ovirt.org/#/c/11492/ > > Engine Side: > 2013-01-30 10:56:38,439 ERROR > [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] > (QuartzScheduler_Worker-70) Rerun vm 887d764a-f835-4112-9eda-836a772ea5eb. > Called from vds lostisles > 2013-01-30 10:56:38,506 INFO > [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] > (pool-3-thread-49) START, MigrateStatusVDSCommand(HostName = lostisles, > HostId = e042b03b-dd4e-414c-be1a-b2c65ac000f5, > vmId=887d764a-f835-4112-9eda-836a772ea5eb), log id: 6556e75b > 2013-01-30 10:56:38,510 ERROR > [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] > (pool-3-thread-49) Failed in MigrateStatusVDS method > 2013-01-30 10:56:38,510 ERROR > [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] > (pool-3-thread-49) Error code migrateErr and error message > VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = > Fatal error during migration > 2013-01-30 10:56:38,511 INFO > [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] > (pool-3-thread-49) Command > org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand return > value > StatusOnlyReturnForXmlRpc [mStatus=StatusForXmlRpc [mCode=12, > mMessage=Fatal error during migration]] > > > VDSM Side: > Thread-43670::ERROR::2013-01-30 10:56:37,052::vm::200::vm.Vm::(_recover) > vmId=`887d764a-f835-4112-9eda-836a772ea5eb`::this function is not supported > by the connection driver: virDomainMigrateToURI2 > Thread-43670::ERROR::2013-01-30 10:56:37,513::vm::288::vm.Vm::(run) > vmId=`887d764a-f835-4112-9eda-836a772ea5eb`::Failed to migrate > Traceback (most recent call last): > File "/usr/share/vdsm/vm.py", line 273, in run > self._startUnderlyingMigration() > File "/usr/share/vdsm/libvirtvm.py", line 504, in > _startUnderlyingMigration > None, maxBandwidth) > File "/usr/share/vdsm/libvirtvm.py", line 540, in f > ret = attr(*args, **kwargs) > File "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line > 111, in wrapper > ret = f(*args, **kwargs) > File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1103, in > migrateToURI2 > if ret == -1: raise libvirtError ('virDomainMigrateToURI2() failed', > dom=self) > libvirtError: this function is not supported by the connection driver: > virDomainMigrateToURI2 Could it be that you are using an ancient libvirt with no virDomainMigrateToURI2? What are your libvirt and qemu-kvm versions (on both machines)? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.2 Test Day
A quick questions: Doesn't oVirt 3.2 support FC17? I can only find the directory for FC18&FC19 in the oVirt release repositories. Mike Burns: > The test day for oVirt 3.2 will be held on Thursday January 31. For > information of the Test Day, please follow: > > http://www.ovirt.org/Testing/OvirtTestDay > > Thanks > > Mike > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Installing a lab setup from scratch using F18
2013-1-22 2:11, Joop: As promised on IRC (jvandewege) I'll post my findings of setting up an ovirt lab environment from scratch using F18. First some background: - 2 hosts for testing storage cluster with replicated gluster data and iso domains (HP ML110 G5) gluster data or cluster data? - 2 hosts for VMs (HP DL360 G5?) - 1 managment server (HP ML110 G5) All physical servers have atleast 1Gb connection and they also have 2 10Gb ethernet ports connected to two Arista switches. Complete setup (except for the managment srv) is redundant. Using F18-x64 DVD and using minimal server with extra tools, after install the ovirt.repo and the beta gluster repo is activated. This serves as a proof of concept for a bigger setup. Problems sofar: - looks like F18 uses a different path to access video since using the defaults leads to garbled video, need to use nomodeset as a kernel option Do you mean the VDSM host installed with F18 or the guest in the host with FC 18 here? I suppose you don't have much chance to access the graphics screen of the VDSM host. - upgrading the minimal install (yum upgrade) gives me kernel-3.7.2-204 and the boot process halts with soft locks on different cpus, reverting to 3.6.10-4.fc18.x86_64 fixes that. Managment is using 3.7.2 kernel without problems BUT it doesn't use libvirt/qemu-kvm/vdsm, my guess its related. - need to disable NetworkManager and enable network (and ifcfg-xxx) to get network going - adding the storage hosts from de webui works but after reboot vdsm is not starting, reason seems to be that network isn't initialised until after all interfaces are done with their dhcp requests. There are 4 interfaces which use dhcp, setting those to bootprotocol=none seems the help. Usually, I use the static IP for each server because the engine add the VDSM host by IPs. - during deploy their is a warning about 'cannot set tuned profile', seems harmless but hadn't seen that one until now. - the deployment script discovers during deployment that the ID of the second storage server is identical to the first one and abort the deployment (Blame HP!) shouldn't it generate a unique one using uuidgen?? Things that are OK sofar: - ovirt-engine setup (no problems with postgresql) - creating/activating gluster volumes (no more deadlocks) Adding virt hosts has to wait til tomorrow, got problems getting the dvd iso onto an usb stick, will probably burn a DVD to keep going. Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Configure NFS resource from Host
jj197005: Hello everybody, I'm trying to configure and install oVirt for test in our University faculty. I have installed an engine an a host, both of them with Fedora 17. The engine is working and I can log-in in the Data Center with admin user. I have tried to add my host to the data center portal and I successfully done. After that I have tried to add a NFS resource which is in the host that I have added. If I open a console in the engine and log-in as vdsm user, I can mount the NFS resource without problems. The problem is when I tried to add this NFS resource to the Data Center. Have you tryied to open an console in the host and tried the same command in the host as in the engine? I have followed the tutorial http://www.ovirt.org/Quick_Start_Guide#Configure_Storage, but when I have completed the form and pressed "Ok", after one or two minutes I receive one screen with bellow error: "Error: A Request to the Server failed with the following Status Code: 500" I'm attaching the vdsm.log file with the lines that are created with this operation. I hope that someone can show me what is the problem. If you need more information aboout the installation I can show it. Many thanks in avanced, Juanjo. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] trouble with pci passthrough
2013-1-10 8:42, ahuser: Hi Itamar, Thanks for your reply. I tried and ro this with virsh + xml file and virt-manager. I suppose you assigned the device to the virtual server successfully with virsh and virt-manager. Confusing is that after the installation oVirt the device is not passed cleanly. Do you mean the old virtual server which was created before oVirt installation was finally managed by oVirt? Or oVirt didn't manage this virtual server but the PCI device assigned to the virtual server disappeared? Von Samsung-Tablet gesendet Itamar Heim hat geschrieben: ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage domain mount options
Alexandru Vladulescu : Dear Shu, Exactly what I was saying, in that section we can only change in the Advanced Parameters the NFS version, the Retransmissions and the Timeout. Sorry, was not seeing these. I am afraid you can not append other options, for neither ovirt engine nor VDSM accepts other options than Retransmissions and the Timeout. Therefore I see exactly no field for additional mount options. As I know there is a thread on the mailing list about the new features that should be included in the 3.2 version release. I think would be useful to include this one too to the GUI, but again my question, how could this be modified in the stable 3.1 release ? Alex On 01/08/2013 03:31 PM, Shu Ming wrote: Alexandru Vladulescu: Hello Guys, I would like to ask you help for the following problem I am facing right now. As we know, on the Storage tab we can configure storage domains in many types. I am using NFS, and when configuring a such export on the Advanced Parameters section we can only adjust the NFS version, Retrans and Timeout. After a successful configuration setup, on all hypervisors I have the mount share declared attached. The result of mount for the share datastore looks like below: nas01.net:/datastore01/nas01.ISO on /rhev/data-center/mnt/nas01.net:_datastore01_nas01.ISO type nfs (rw,soft,nosharecache,timeo=10,retrans=6,vers=4,addr=10.20.30.10,clientaddr=10.20.30.102) All good and sound but how can I tune the NFS mounting command, for example let's say adding noatime value to the mount option list ? New domain ---> Advanced Parameters. Many thanks, Alex. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage domain mount options
Alexandru Vladulescu: Hello Guys, I would like to ask you help for the following problem I am facing right now. As we know, on the Storage tab we can configure storage domains in many types. I am using NFS, and when configuring a such export on the Advanced Parameters section we can only adjust the NFS version, Retrans and Timeout. After a successful configuration setup, on all hypervisors I have the mount share declared attached. The result of mount for the share datastore looks like below: nas01.net:/datastore01/nas01.ISO on /rhev/data-center/mnt/nas01.net:_datastore01_nas01.ISO type nfs (rw,soft,nosharecache,timeo=10,retrans=6,vers=4,addr=10.20.30.10,clientaddr=10.20.30.102) All good and sound but how can I tune the NFS mounting command, for example let's say adding noatime value to the mount option list ? New domain ---> Advanced Parameters. Many thanks, Alex. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Failed to import Vm from export to storagedomain
How did you export the old VMs to ovf files? Was it a exporting bug causing wrong ovf file entries? 2013-1-5 19:47, Ricky : Hi, I found that to, in all my VMs. It seems not to be linked ovirt as I found other People have the issue in kvm forum. Regards Ricky Den 5 jan 2013 10:45 skrev "Haim Ateya" <mailto:hat...@redhat.com>>: Hi Ricky, its really interesting, the vm process failed to start as libvirt identified double use of same PCI address: Thread-3111::ERROR::2013-01-03 16:30:27,373::vm::617::vm.Vm::(_startUnderlyingVm) vmId=`9741c58b-e7b2-41d8-9f35-8ea79ca81528`::The vm start process failed Traceback (most recent call last): File "/usr/share/vdsm/vm.py", line 579, in _startUnderlyingVm self._run() File "/usr/share/vdsm/libvirtvm.py", line 1421, in _run self._connection.createXML(domxml, flags), File "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line 83, in wrapper ret = f(*args, **kwargs) File "/usr/lib64/python2.6/site-packages/libvirt.py", line 2489, in createXML if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self) libvirtError: XML error: Attempted double use of PCI Address '0:0:1.2' (may need "multifunction='on'" for device on function 0 Thread-3111::DEBUG::2013-01-03 16:30:27,377::vm::933::vm.Vm::(setDownStatus) vmId=`9741c58b-e7b2-41d8-9f35-8ea79ca81528`::Changed state to Down: XML error: Attempted double use of PCI Address '0:0:1.2' (may need "multifunction='on'" for device on function 0 from the VM xml, I see you trying to use 6 devices of USB with same PCI address: need to understand what went wrong there, was it the export attempt that created this problematic entry in the OVF file or was it the import? anyway, please open a bug for it. Haim - Original Message - > From: "Ricky" mailto:rockyba...@gmail.com>> > To: Users@ovirt.org <mailto:Users@ovirt.org> > Sent: Thursday, January 3, 2013 7:00:21 PM > Subject: [Users] Failed to import Vm from export to storagedomain > > Hi, > > So, Finally I reinstalled the whole cluster after I have exported > every VM. > > I followed this wiki > http://wiki.dreyou.org/dokuwiki/doku.php?id=ovirt_rpm_start31. > > Everything went up except that I just have one host installed in the > cluster. The other host is still serving the old cluster > > When trying to import my old VMs I got problems with some of them not > beeing imported. But 3 of my VMs did and one of them was my > mailserver... but when I try to start the VM I hit the wall again. > > I have attached the vdsm.log, right now I cant see the forest for all > the trees > > Regards //Ricky > > ___ > Users mailing list > Users@ovirt.org <mailto:Users@ovirt.org> > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] What do you want to see in oVirt next?
1) I would like to have the ability to import an existing VM image from outside as a template into oVirt, then new VMs can be cloned from this template. 2) I would like to have an oVirt trial package based on nested-kvm. This package will contain several vdsm node images, one engine image and one storage several image. After the package is installed into a physical server, the images can be started as VMs including the engine, the VDSM nodes, the storage server. The VDSM nodes must support nested-kvm to have nested VM on them. It is very quick and simple for a new-comer to try the oVirt envionment. Itamar Heim: Hi Everyone, as we wrap oVirt 3.2, I wanted to check with oVirt users on what they find good/useful in oVirt, and what they would like to see improved/added in coming versions? Thanks, Itamar ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VM has paused due to unknown storage error
David Wilson: Hi everyone, Some feedbackon this error, and a question I hope that someone could possibly assist with. I managed to get the guest running again byusing dd and qemu-img to export the filesystem image and base image, convert to raw format and run a fsck on the looped partition. I am happy you make that work. Can you describe more details about how you dd the guest image? And how did you use qemu-img to export the filesystem image and base image. When mounted as a loop filesystem, fsck easily repaired it. Any ideas why oVirt kept pausing the guest and did not allow fsck to repair the filesystem? Get important Linux and industry-related news at: facebook.com/dcdata <http://facebook.com/dcdata> Kind regards, David Wilson CNS,CLS, LINUX+, CLA, DCTS, LPIC3 *LinuxTech CC t/a DcData* CK number: 2001/058368/23 *Website:* http://www.dcdata.co.za *Support:* +27(0)860-1-LINUX *Mobile:* +27(0)824147413 *Tel:* +27(0)333446100 *Fax:* +27(0)866878971 On 12/02/2012 11:17 AM, David Wilson wrote: Hi everyone, Sunday fun :) One of our critical Linux VMs ran out of disk space. I cleared up space by removing old application logs within the guest, rebooted the guest and was presented with the following information message during bootup when the filesystem ext3/4 scan runs: /Clearing orhpaned inode ./ Shortly after this message the the guest is paused by oVirt and the "VM has paused due to unknown storage error" message is displayed in the oVirt web GUI. On the physical node itself, I found the following error in/var/log/vdsm/vdsm.log: /libvirtEventLoop::INFO::2012-12-02 09:05:50,296::libvirtvm::1965::vm.Vm::(_onAbnormalStop) vmId=`23b9212c-1e25-4003-aa18-b1e819bf6bb1`::abnormal vm stop device ide0-0-1 error eother/ Any ideas on how to get more informationon what exactly the error is? I've tried booting the guest into rescue mode, run a manual fsck on the logical volume but each time the guest is automaticall paused due to the "unknown storage error". We are using a FC SAN for storage, sowhat I've decided to try is export the disk using "dd" on the physical node and then try repairing it by mounting it as a loop filesystem on another physical server, and then use "dd" to import it back in again. Is this the right approach to take to get the system back online? -- Get important Linux and industry-related news at: facebook.com/dcdata <http://facebook.com/dcdata> Kind regards, David Wilson CNS,CLS, LINUX+, CLA, DCTS, LPIC3 *LinuxTech CC t/a DcData* CK number: 2001/058368/23 *Website:* http://www.dcdata.co.za *Support:* +27(0)860-1-LINUX *Mobile:* +27(0)824147413 *Tel:* +27(0)333446100 *Fax:* +27(0)866878971 Time to evaluate your email security provider? Watch the video <http://www.mimecast.com/emailsecurity/> and take advantage of Mimecast's first ever limited promotion. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage domain issue iSCSI
I think the error is clear. Engine was expecting a master storage domain metadata format version 3, while the master storage metadata gave version 4. I am wondering if the master storage domain metadata was corrupted during the power off. See: the error came from. Thread-54::ERROR::2012-11-29 20:06:02,491::sp::1532::Storage.StoragePool::(getMasterDomain) Requested master domain 68d8b0e2-c348-4cfe-a896-08c62d491dfb does not have expected version 3 it is version 4 See: 'MASTER_VERSION=4' below: Thread-49::DEBUG::2012-11-29 20:05:58,337::persistentDict::234::Storage.PersistentDict::(refresh) read lines (VGTagMetadataRW)=['VERSION=2', u'PV0=pv:36001405c2f5e9d2d3be7d41a8db27dd6,uuid:b62d1B-zFVl-LKrH-fekH-vprs-znOZ-IF6jJy,pestart:0,pecount:4093,mapoffset:0', 'TYPE=ISCSI', 'LOGBLKSIZE=512', 'SDUUID=68d8b0e2-c348-4cfe-a896-08c62d491dfb', 'LEASERETRIES=3', 'LOCKRENEWALINTERVALSEC=5', 'LOCKPOLICY=', 'PHYBLKSIZE=512', 'VGUUID=q7sGQ7-1G03-s9mh-dIyx-NSmo-P0zk-23c3Ad', 'DESCRIPTION=512gb2', 'CLASS=Data', 'POOL_UUID=f1b40ecc-b6a9-44e7-92cb-0fdf445e3175', 'IOOPTIMEOUTSEC=10', 'LEASETIMESEC=60', 'MASTER_VERSION=4'_,_ 'ROLE=Master', 'POOL_DESCRIPTION=UB1', u'POOL_DOMAINS=afec8026-ccac-4366-bb4b-2150d8731e4c:Active,c2b01420-fc73-4ccc-a560-3e1c5aa28a9f:Active,45fa93a8-1761-4522-bafb-c5d3ab45f731:Attached,68d8b0e2-c348-4cfe-a896-08c62d491dfb:Active', 'POOL_SPM_LVER=541', '_SHA_CKSUM=d54ce32f30c8040449f2a91ccc6e115e35894a5e', 'POOL_SPM_ID=-1'] 2012-11-30 4:08, Simon Donnellan: Hi Yeela, Thanks for the reply, I've attached a vdsm.log file containing an attempt to activate the host, then activate the iSCSI storage domain. Thanks Simon On Thu, Nov 29, 2012 at 6:03 PM, Yeela Kaplan <mailto:ykap...@redhat.com>> wrote: Hi Simon, We could use some more information in order to understand the problem, could you please attach the vdsm logs? Thanks, Yeela - Original Message - > From: "Simon Donnellan" mailto:f...@baconwho.re>> > To: users@ovirt.org <mailto:users@ovirt.org> > Sent: Thursday, November 29, 2012 7:35:18 PM > Subject: [Users] Storage domain issue iSCSI > > > Hi Everyone, > > I'm having an issue following a power cut, none of my 3 nodes (All > Fedora 17 / oVirt 3.1) are able to attach the master Domain. > > in /var/log/messages I see the following on each node: > > Nov 29 17:15:41 hades vdsm Storage.StoragePool ERROR Requested master > domain 68d8b0e2-c348-4cfe-a896-08c62d491dfb does not have expected > version 3 it is version 4 > Nov 29 17:15:41 hades vdsm TaskManager.Task ERROR > Task=`f06fd1bb-46d1-47d7-80ca-c2e01becdc51`::Unexpected error > Nov 29 17:15:41 hades vdsm Storage.Dispatcher.Protect ERROR > {'status': {'message': "Wrong Master domain or its version: > 'SD=68d8b0e2-c348-4cfe-a896-08c62d491dfb, > pool=f1b40ecc-b6a9-44e7-92cb-0fdf445e3175'", 'code': 324}} > > I've tried reboots/restarts/node re-installs > > I can see the PV and the iSCSI sessions fine from the shell. > > As this is the master, none of my nodes will start. > > Any help would be great. > > Kind Regards > > Simon > > ___ > Users mailing list > Users@ovirt.org <mailto:Users@ovirt.org> > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Live snapshot deletion
I think it is because Qemu doesn't support the live snapshot deleting yet. Can you create your snapshot while the VM is running? What is your Qemu version? You can get your Qemu version by "qemu-kvm --version" in FC17. 2012-11-22 21:29, Vincent Miszczak Hi, I've tried live VM disks snapshot. Its ok. It appears I cannot delete those snapshots while the VM is running. Is it a bug? If not, is there any plan for this ? Regards Vince -- This message has been scanned for viruses and dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is believed to be clean. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] ovirt & iscsi mulitpath
2012Jorick Astrego: Dear all, After some problems I have my ovirt setup running now. But I run into a new problem with the network configuration. We have a quad nic with 4 gigabit connections over 2 switches (2X2) and an active/passive iscsi SAN. The first is connected to switch 1 and the second to switch 2 with a 10Gbe link. Do you mean you have a host(ovirt node) with a quad nics conneting to switches? And one SAN connecting to the switch 1 in another side, the other SAN conecting to switch 2 with a 10Gbe lnk? I think a picture will make the text description more comprehensive. Now I would like to use iSCSI multipathing instead of bonding but I cannot use the same vlan for multiple storage networks and I cannot assign the same storage network to several nic's. I could use bonding, but we use 4 links over 2 switches and if I read everything correctly bonding only works through a single switch. How do other people achieve this? -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt Memory Page Sharing or to less memory
Mathok : 2012/10/17 Alan Johnson mailto:a...@datdec.com>> On Wed, Oct 17, 2012 at 5:02 PM, Mathok mailto:math...@googlemail.com>> wrote: Same here with ovirt 3.1.0-2 i can't see a change in the UI. But i'm able to start more VMs and hava a higher usag of my swap partiotion so i think the change had the desired effect Oh, does this take advantage of host swap space as well? I thought I had read oVirt could do that somewhere, but I have been reading about so many different virtualization systems over the last few months that when the RHEV 3.1 Admin Guide <https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Virtualization/3.1-Beta/html-single/Administration_Guide/index.html> did not mention swap space in section "4.2.2.2. Memory Optimization Settings Explained", I was not sure if it applied here. This is all it says at the moment: "Memory page sharing allows virtual machines to use up to 200% of their allocated memory by utilizing unused memory in other virtual machines. This process is based on the assumption that the virtual machines in your Red Hat Enterprise Virtualization environment will not all be running at full capacity at the same time, allowing unused memory to be temporarily allocated to a particular virtual machine." Do you have a reference handy that confirms and explains this? I put some speedy SSDs in my hosts to hopefully take advantage of this (and maybe run gluster), so I am hoping to see that in print somewhere. I'll dig it up if you don't have it handy, but a confirmation that this is your experience and understanding would make me feel better in the mean time. let me explain my (now fixed) problem i have a ovirt host with 8 GB Ram and 12 VMs every with 256 MB Physical Memory Guarantee. When i start my two mysql-cluster vms they will use the 256 PMG plus 3,75 GB MS they have defined a max of 4 GB MS. At this poitn now the problem begins the mysql taken the hole memory in both vms and now there is no more free ram at the host and it is not possible to start more vms. In my understanding, you need to hard cap the physical memory used by the cluster VM. That will make sure all of the physical memory used by the VM will not exceed the cap, say 2G. In total, the two cluster VMs will use 4G memory at most, then the host will have 4G memory at least to start other VMs. Is that what you want? (this is also speculation im not a expert) So i need for my understanding a higher rate of memory overcommit to be able to start all vms, and for that the host must use the swap to have enough memory for overcomit to start all vms and yes the higher the rate, the worse the performance. I'm not sure if this is the right or good way tho fix this problem (sorry for my bad english I hope this is understandable) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Images not appearing in ISO domain
y next though. Thanks for all your assistance so far. Regards. Neil Wilson. Going to your host console, what do you see on the owner and permitions of the ISO domain? I had a similar issue with a ubuntu server that exported the NFS share as nobody.nobody instead of vdsm.kvm on the host. That domain was activated but I couldn't get to the share with a "permeation denied" error" Strangely enough, I see a similar issue... drwxr-xr-x. 3 vdsm nobody 4096 Oct 16 17:37 10.251.193.5:_iso-domain Any ideas how to correct it? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Hot Snapshotting of virtual disks
Basically, backup is different from snapshotting. Backup should have another storage different from the current share storage to store the disk content. oVirt 3.1 does have support for live snapshot of the VM disks and Qemu 1.1 is required at least to support this operation. In oVirt 3.1, you can also create an backup domain to store the VM disks, but I think it is not the real backup to another physical storage. So you may have to copy the snapshot made to other physical storage manually . 2012-10-18 9:20, Jason Lawer: Hi, Can anyone give advice on what they are using for backup on their ovirt deployments. We have been using tar balls & rsync on our linux servers, but are looking for something more manageable and the number of servers grows rapidly. I ask because I have been looking at a few options. The first idea that came to mind was a hot snapshot of the virtual disk, however from what I can see ovirt won't allow that. Most of the others have serious drawbacks, so I wanted to know if anyone had a silver bullet before I put more time into it. Jason ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Is this "dd" operation harmful?
After reading the code, every mailbox should be 4096 byte size. And the total mailbox size is host * 4096. Ony one host is here, so the total mailbox size here is 4096. why should the 'dd' operation read 1024000 byte which is 1000K byte much lager than 4096 here? 2012-10-11 18:54, Dan Kenigsberg: On Thu, Oct 11, 2012 at 03:44:25PM +0800, Shu Ming wrote: Hi, I found some "dd" operations were launched contiguously in my vdsm.log. Is this harmful? How was this operation caused? That's storage.storage_mailbox.SPM_MailMonitor, polling for lvextend requests. dd is used, since in the old days, vdsm did not have storage.fileUtils.DirectFile. The behavior is expected, but I cannot say that it is harmless. The mailbox should be high on http://wiki.ovirt.org/wiki/Vdsm_TODO#refactoring since forking so much is a waste, as well as using strings instead of bytearrays. Making the module as a separate, testable entity, is important, too. From vdsm.log: Dummy-51000::DEBUG::2012-10-11 15:38:57,243::__init__::1249::Storage.Misc.excCmd::(_log) 'dd if=/rhev/data-center/6f6d4801-7447-48ea-b516-627d83e7801e/mastersd/dom_md/inbox iflag=direct,fullblock count=1 bs=1024000' (cwd None) -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Is this "dd" operation harmful?
Hi, I found some "dd" operations were launched contiguously in my vdsm.log. Is this harmful? How was this operation caused? From vdsm.log: Dummy-51000::DEBUG::2012-10-11 15:38:57,243::__init__::1249::Storage.Misc.excCmd::(_log) 'dd if=/rhev/data-center/6f6d4801-7447-48ea-b516-627d83e7801e/mastersd/dom_md/inbox iflag=direct,fullblock count=1 bs=1024000' (cwd None) Dummy-51000::DEBUG::2012-10-11 15:38:57,305::__init__::1249::Storage.Misc.excCmd::(_log) SUCCESS: = '1+0 records in\n1+0 records out\n1024000 bytes (1.0 MB) copied, 0.0388821 s, 26.3 MB/s\n'; = 0 Dummy-51000::DEBUG::2012-10-11 15:38:59,313::__init__::1249::Storage.Misc.excCmd::(_log) 'dd if=/rhev/data-center/6f6d4801-7447-48ea-b516-627d83e7801e/mastersd/dom_md/inbox iflag=direct,fullblock count=1 bs=1024000' (cwd None) Dummy-51000::DEBUG::2012-10-11 15:38:59,375::__init__::1249::Storage.Misc.excCmd::(_log) SUCCESS: = '1+0 records in\n1+0 records out\n1024000 bytes (1.0 MB) copied, 0.0398412 s, 25.7 MB/s\n'; = 0 Dummy-51000::DEBUG::2012-10-11 15:39:01,383::__init__::1249::Storage.Misc.excCmd::(_log) 'dd if=/rhev/data-center/6f6d4801-7447-48ea-b516-627d83e7801e/mastersd/dom_md/inbox iflag=direct,fullblock count=1 bs=1024000' (cwd None) Dummy-51000::DEBUG::2012-10-11 15:39:01,445::__init__::1249::Storage.Misc.excCmd::(_log) SUCCESS: = '1+0 records in\n1+0 records out\n1024000 bytes (1.0 MB) copied, 0.0393934 s, 26.0 MB/s\n'; = 0 Dummy-51000::DEBUG::2012-10-11 15:39:03,453::__init__::1249::Storage.Misc.excCmd::(_log) 'dd if=/rhev/data-center/6f6d4801-7447-48ea-b516-627d83e7801e/mastersd/dom_md/inbox iflag=direct,fullblock count=1 bs=1024000' (cwd None) Dummy-51000::DEBUG::2012-10-11 15:39:03,515::__init__::1249::Storage.Misc.excCmd::(_log) SUCCESS: = '1+0 records in\n1+0 records out\n1024000 bytes (1.0 MB) copied, 0.0391104 s, 26.2 MB/s\n'; = 0 -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Fwd: Features/Vdsm for PPC64
于 2012-9-12 13:13, Pradipta Kumar Banerjee 写道: On 09/12/2012 10:19 AM, Deepak C Shetty wrote: FYI - sending to ur imap id. Original Message Subject:[Users] Features/Vdsm for PPC64 Date: Sun, 9 Sep 2012 14:15:31 -0400 From: Andrei Vakhnin To: Looks like ovirt-engine and vdsm support for IBM POWER 7 is on road map. Is there a plan to support IBM POWER6 architecture? We're looking to virtualize 5 x IBM POWER6 BladeCenter H to utilize libvirt and KVM on SLES11 pcc64 blades. Thanks Hi Andrei, I don't think KVM will be natively supported on POWER6 platform. Does POWER7 support KVM natively? http://wiki.ovirt.org/wiki/Features/Vdsm_for_PPC64 Andrei ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Can oVirt be installed in a virtual machine?
? 2012-9-13 1:26, Nicolas Chenier: Hi all, I am starting a small hosting business and want to use oVirt w/ KVM as my virtualization platform. I currently have 2 host servers and an iSCSI NAS. Do I need a dedicated machine to run oVirt? Can I run it from a VM? Of course you can install ovirt-engine on a VM. Can I use the all-in-one solution in a Production environment, with a 2nd host? ... would I need to install oVirt on both hosts, in the event that one of my servers went down? I do not recommend to use all-in-on solution in a Production environment. You need to install ovirt-engine on one host(might be your desktop) and install VDSM on the two host servers. ovirt-engine doesn't support HA yet, so you need only one ovirt-engine. I am trying to see how I can survive if my oVirt server fails. It would be great if it ran from a VM but I can also see issues with doing that... Another option would be to run oVirt on my workstation and have it connect to my 2 host servers in colocation over the internet? For ovirt-engine installation, 4G plus memory is recommended. So you can start a VM with more than 4G memory and install ovirt-engine on that, also make sure ovirt-engine can connect the two host servers over the internet. Please let me know how you've accomplished an oVirt setup with 2 servers. Thank you! Nic ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] qcow2 image import.
On 2012-8-19 18:22, Omer Frenkel wrote: *From: *"Andres Gonzalez" *To: *users@ovirt.org *Sent: *Saturday, August 18, 2012 5:30:34 AM *Subject: *[Users] qcow2 image import. Hello !! I'm wondering if it's possible to import a VM disk on qcow2 format on oVirt to use it as a VM hard disk. The idea is to import a VMWare (vmdk) o Xen (ova) virtual hdd on oVirt. Regards. -- AGD ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users As far as i remember, there is no way to import just a disk, only vm/template. i guess you could find a way to create an OVF to represent a vm that attached to that disk, import it and then detach the disk from the fake vm Do we have such a tool in oVirt? Or just create the OVF file manually? After I get the OVF file, where should I put the OVF file and the disk file to be imported? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] ovirt 3.1 and live snapshots
I am afraid you should upgrade qemu manually to 1.1 at least. On 2012-8-10 17:41, Winfried de Heiden wrote: Hi all, As mentioned in the oVirt 3.1 release notes: "Live snapshotting of virtual machines running on virtualization hosts with QEMU 1.1 or higher is now supported". What about Fedora 17? The Fedora version is still at 1.01: rpm -qi qemu-system-x86 Name: qemu-system-x86 Epoch : 2 Version : 1.0.1 Release : 1.fc17 Architecture: x86_64 Install Date: vr 10 aug 2012 11:33:59 CEST Group : Development/Tools Size: 13594005 License : GPLv2+ and LGPLv2+ and BSD Signature : RSA/SHA256, ma 30 jul 2012 20:05:08 CEST, Key ID 50e94c991aca3465 Source RPM : qemu-1.0.1-1.fc17.src.rpm Build Date : ma 30 jul 2012 03:34:33 CEST Build Host : x86-01.phx2.fedoraproject.org Relocations : (not relocatable) Packager: Fedora Project Vendor : Fedora Project URL : http://www.qemu.org/ Summary : QEMU system emulator for x86 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] host raiding two LUN from different external storage
IMHO, host level raid means software raid in one local node. In order to support live migration, we should clone the software raid in the destination node and make sure all the data are flushed into the external storage device before migration starts. On 2012-7-29 17:08, Johan Kragsterman wrote: Hi! In some setups, like when you got two datacenters that works like failover sites, you would like to have two external raid controllers(storage devices), one in each datacenter. You then send two identical LUN's, from each controller, to a cluster, let's say two hosts, for simplicity. What you normally do is to host raid these LUN's in mirror(raid 1), so the hosts write the same to both LUN's, and both controllers. Question for me here is if I can accomplish this in oVirt management? Because if I can't, it will be a problem, because if I host raid at the host level, then the storage would be local storage for oVirt, wouldn't it? And then I suppose it can't be used for live migration, can it? Regrds Johan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Migrating from KVM to oVirt 3.1 fails - corrupt OVF
On 2012-7-22 19:51, Ayal Baron wrote: - Original Message - On 07/20/2012 09:19 PM, Trey Dockendorf wrote: On Fri, Jul 20, 2012 at 11:32 AM, Itamar Heim wrote: On 07/20/2012 07:21 PM, Trey Dockendorf wrote: On Fri, Jul 20, 2012 at 3:52 AM, Itamar Heim wrote: On 07/20/2012 02:08 AM, Trey Dockendorf wrote: On Thu, Jul 19, 2012 at 4:00 AM, Matthew Booth wrote: On 18/07/12 23:52, Itamar Heim wrote: On 07/18/2012 06:00 PM, Trey Dockendorf wrote: I'm attempting to fine-tune the process of getting my KVM/Libvirt managed VMs over into my new oVirt infrastructure, and the virt-v2v import is failing in the WUI with "Failed to read VM 'dh-imager01' OVF, it may be corrupted". I've attached both engine and vdsm logs that are a snapshot from when I ran the virt-v2v command until I saw the failure under Events. matt - any thoughts? Nothing springs to mind immediately, but it sounds like v2v is producing an invalid OVF. If somebody can diagnose what the problem with the OVF is I can fix v2v. Matt virt-v2v command used... # virt-v2v -i libvirtxml -o rhev -os dc-vmarchitect.tamu.edu:/exportdomain dh-imager01.xml dh-imager01_sys.qcow2: 100% [===]D 0h00m37s virt-v2v: dh-imager01 configured with virtio drivers. The xml has been modified numerous times based on past mailing list comments to have VNC and Network information removed, but still the same failure. I've attached the latest XML that was used in the log's failure as dh-imager01.xml. I've also tried passing hte bridge device (ovirtmgmt) in the above command with same failure results. Node and Engine are both CentOS 6.2, with vdsm-4.10.0-4 and ovirt-engine-3.1 respectively. Please let me know what other configuration information could be helpful to debug / troubleshoot this. Are there any other methods besides a virt-v2v migration that can allow me to use my previous KVM VMs within oVirt? Thanks - Trey ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Matthew Booth, RHCA, RHCSS Red Hat Engineering, Virtualisation Team GPG ID: D33C3490 GPG FPR: 3733 612D 2D05 5458 8A8A 1600 3441 EA19 D33C 3490 Attached is the virt-v2v generated ovf that's in my NFS export domain Any other means to get KVM/libvirt/virt-manager based VMs into oVirt? Possibly something as crude as provisioning new VMs with oVirt then replacing the virtual hard drives? this would work - just create the VM on an NFS storage domain with a disk the same size as origin, and copy over the disk you had. a bit trickier for iscsi, so i'd do this with nfs. Thanks - Trey Why is it trickier with iSCSI? Currently the only Data Center I have functioning in oVirt only has iSCSI storage available. with iscsi, you will have to create the disks as pre-allocated, and use DD to overwrite them. NFS doesn't have to be pre-allocated. and since you are using pre-allocated, you need to use the RAW format iirc Currently most of my KVM VMs are qcow2, so converting them to raw would not be a problem. However, why is DD necessary? Why can't I overwrite the .img with my *.img file ? Since I've used mostly qcow2 in my time with KVM/libvirt I may lack some understanding of how to correctly handle raw images. in both cases there aren't any .img files. you can convert you qcow2 to raw before copying them over to iscsi or nfs using qemu-img convert. it is not necessary, but will save you failing on small details between the two. using the export domain is safest, even though it doubles the amount of IO Would a qcow2 image with preallocation=metadata be possible on an iSCSI data store? ayal? nope. metadata preallocation means that each logical block has a corresponding physical block. Ayal, by saying "logical block" and physical block here, what do they stand for in linux systems? I guess, physical block is "the scsi lun disk", logical block is "lvm disk"? right? With files this is fine as you can seek wherever you want and the file will remain sparse. With block devices this makes little sense as the second the guest accesses a block which is mapped to an unallocated physical block we'd have to allocate all the area up to that point. (btw, qemu-img will fail if you try to create such an image on a block device) _______ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Wondering about updating ovirt from 3.0 to 3.1
I think the safer way is to uninstall ovirt 3.0 and reinstall 3.1 after 3.0 is cleaned. On 2012-7-12 23:23, Dominic Kaiser wrote: What is the proper process for this in ovirt? Or has someone done it already? Thanks, -- Dominic Kaiser Greater Boston Vineyard Director of Operations cell: 617-230-1412 fax: 617-252-0238 email: domi...@bostonvineyard.org <mailto:domi...@bostonvineyard.org> ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Online snapshot
After looking into a qemu a bit, I believe the snapshot operation on the disk in oVirt is not a live snapshot, because the guest VM will be paused by qemu when the snapshot is undergoing.That is what qemu monitor command "snapshot_blkdev" does and VDSM depends on that command in low level.Most likely, the pausing time is non-trival for a normal snapshot. On 2012-6-29 0:37, Itamar Heim wrote: On 06/28/2012 09:20 AM, Eric Blake wrote: On 06/28/2012 07:07 AM, Dave Allan wrote: On Thu, Jun 28, 2012 at 06:34:25AM -0400, Itamar Heim wrote: On 06/28/2012 04:40 AM, Winfried de Heiden wrote: Hi all, It seems live snapshot is available in the Fedora 17 qemu-kvm. On my laptop with kvm, virt-manager, libvirt, virsh etc. I created a virtual machine and tried to make a live snapshot: virsh # snapshot-create RHEL55_NTP Domain snapshot 1340871802 created That's a system-checkpoint snapshot, because you didn't use --disk-only. When you say 'live snapshot' were you intending the fast operation of just a disk snapshot (via the 'transaction' or 'blockdev-snapshot-sync' monitor command) or the slow operation of a checkpoint (via the 'savevm' monitor command)? [root@kvm ~]# rpm -qf `which qemu-kvm` qemu-system-x86-1.0-17.fc17.x86_64 [wdh@laptop-winfried ~]$ rpm -qf `which qemu-kvm` qemu-system-x86-1.0-17.fc17.x86_64 This qemu does not support the 'transaction' monitor command, so libvirt has to fall back to the non-atomic 'blockdev-snapshot-sync', or else give up because of missing functionality. dave - who can help us elaborate on this libvirt error: reuse is not supported with this QEMU binary this is the relevant error coming from libvirt. maybe fedora 17 qemu-kvm does not have live snapshot support? Thread-306::ERROR::2012-06-27 12:46:40,178::libvirtvm::1782::vm.Vm::(snapshot) vmId=`ef978066-09c8-40aa-8e0b-4accfacc15bd`::Unable to take snapshot Traceback (most recent call last): File "/usr/share/vdsm/libvirtvm.py", line 1780, in snapshot libvirt.VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT)) OK, so this is a case of VDSM driving a different use of the API than what you did with your virsh command line. VDSM is attempting to do the equivalent of 'virsh snapshot-create --disk-only --reuse-ext', but because your qemu doesn't support the 'transaction' command, libvirt can't make qemu do what VDSM wants. Basically, the 'blockdev-snapshot-sync' command in qemu 1.0 lacks the ability to reuse qcow2 metadata already present in the file pre-created by VDSM; this wasn't added until the 'transaction' command of qemu 1.1. ok, i guess the question is then when qemu 1.1 is expected in fedora ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] What does this small icon mean in engine?
Hi, Please check the attachment to see the information about my two disks. And both of disk2 and disk3 do have a small icon like a hand in the fourth column. The first column is "Alias" and the second is "ID". There is no description in the third and the fourth column. What dose the small icon mean? -- Shu Ming IBM China Systems and Technology Laboratory <>___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Deleting a snapshot of eight disks took more than fifteen minutes
On 2012-7-3 17:01, Simon Grinberg wrote: It depends. Block device or NFS? NFS Did you had data on the deleted snapshot? Got some. Not too much Did you had wipe after delete marked or not? No. Did the snapshots contain data? Got some. Not too much Did you delete a snapshot or did you revert to a snapshot? Just deleting a snapshot. - Original Message - From: "Shu Ming" To: "users@oVirt.org" Sent: Tuesday, July 3, 2012 11:48:35 AM Subject: [Users] Deleting a snapshot of eight disks took more than fifteen minutes Is it reasonable? I created snapshot1 and snapshot2 for the eight disks and then tried to delete snapshot2. And it took 15+ minutes to finish the operation. Here is the disk list: my-vm1_Disk1 40 GB 3 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:01 my-vm1_Disk2 10 GB10 GB data Preallocated VirtIO OK 2012-Jun-25, 23:19:00 my-vm1_Disk3 4 GB < 1 GB data Thin Provision VirtIO OK 2012-Jun-26, 23:27:40 my-vm1_Disk4 3 GB 3 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:01 my-vm1_Disk5 3 GB 3 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:01 my-vm1_Disk6 4 GB 4 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:02 my-vm1_Disk7 5 GB 5 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:02 my-vm1_Disk8 6 GB 6 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:02 -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Deleting a snapshot of eight disks took more than fifteen minutes
Is it reasonable? I created snapshot1 and snapshot2 for the eight disks and then tried to delete snapshot2. And it took 15+ minutes to finish the operation. Here is the disk list: my-vm1_Disk1 40 GB 3 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:01 my-vm1_Disk2 10 GB10 GB data Preallocated VirtIO OK 2012-Jun-25, 23:19:00 my-vm1_Disk3 4 GB < 1 GB data Thin Provision VirtIO OK 2012-Jun-26, 23:27:40 my-vm1_Disk4 3 GB 3 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:01 my-vm1_Disk5 3 GB 3 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:01 my-vm1_Disk6 4 GB 4 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:02 my-vm1_Disk7 5 GB 5 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:02 my-vm1_Disk8 6 GB 6 GB data Thin Provision VirtIO OK 2012-Jun-27, 13:24:02 -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Online snapshot
ibvirtError: unsupported configuration: reuse is not supported with this QEMU binary ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I create a snapshot for virtual disks only?
On 2012-6-28 10:38, Itamar Heim wrote: On 06/27/2012 10:29 PM, Shu Ming wrote: Sorry for confusion here. I attached the snapshot created. I don't think it is a standalone snapshot for disks(all eight) only. And the usage of the disk image snapshot should be bound with OS memory snapshot. The there is currently no OS memory snapshot Enhh, interesting. So it is not live snapshot? The VM must be paused to do the snapshot in my engine. Also, I hit a bug to resume the VM after the snapshot was done. The VM was always in pause state after I clicked the resume button after the snapshot was done. I looked into the VM by VNC and VNC console showed that the VM was in frozen state. Has anyone seen these or has it been fixed in the upstream? other problem is the VM must be paused when the snapshot is undergoing. On 2012-6-28 10:16, Itamar Heim wrote: On 06/27/2012 09:54 PM, Rami Vaknin wrote: On 06/28/2012 04:51 AM, Itamar Heim wrote: On 06/27/2012 09:38 PM, Shu Ming wrote: On 2012-6-28 9:20, Itamar Heim wrote: On 06/27/2012 08:57 PM, Shu Ming wrote: On 2012-6-27 23:30, Michal Skrivanek wrote: That would make sense only when you are powered off, wouldn't it? Otherwise what's the point of disk snapshot with open transactions, buffers in mem, etc, without saving the state of the VM too? I understand syncing virtual disk state with the OS cache is a quite challenge to a snapshot tool developers. However, it is a handy feature for the users just want to back up their data in the disks without stopping VM. As other virtualization solution support this feature, we should narrow the gap to attract more users to oVirt. actually, live snapshot today is only supported for disks, without the RAM. I can not find the button to create a snapshot for disk only in engine 3.1 beta release. Are you talking about a undergoing project? The is no option to save a single disk in webadmin. live snapshot is for disks only, not for RAM. so the live snapshot button only snapshots the disks already. there is a mix of two things here: 1. taking snapshot of a subset of the disks. 2. taking snapshot of disks + ram Thanks, michal On 27 Jun 2012, at 17:26, Shu Ming wrote: On 2012-6-27 23:19, Dafna Ron wrote: Hi, no. the snapshot is for the entire vm and it's disks. On 06/27/2012 05:31 PM, Shu Ming wrote: Hi, I am testing oVirt engine 3.1 beta release 06-07. I tried "snapshots-->create" button for a VM and it looked like that the snapshot to be created was for both the running state of the system and the virtual disks. I am wondering if there is any way to create the snapshot only for the virtual disks of the VM in engine? Do we have future plan to make snapshot for it's disks? -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I create a snapshot for virtual disks only?
On 2012-6-28 9:20, Itamar Heim wrote: On 06/27/2012 08:57 PM, Shu Ming wrote: On 2012-6-27 23:30, Michal Skrivanek wrote: That would make sense only when you are powered off, wouldn't it? Otherwise what's the point of disk snapshot with open transactions, buffers in mem, etc, without saving the state of the VM too? I understand syncing virtual disk state with the OS cache is a quite challenge to a snapshot tool developers. However, it is a handy feature for the users just want to back up their data in the disks without stopping VM. As other virtualization solution support this feature, we should narrow the gap to attract more users to oVirt. actually, live snapshot today is only supported for disks, without the RAM. I can not find the button to create a snapshot for disk only in engine 3.1 beta release. Are you talking about a undergoing project? Thanks, michal On 27 Jun 2012, at 17:26, Shu Ming wrote: On 2012-6-27 23:19, Dafna Ron wrote: Hi, no. the snapshot is for the entire vm and it's disks. On 06/27/2012 05:31 PM, Shu Ming wrote: Hi, I am testing oVirt engine 3.1 beta release 06-07. I tried "snapshots-->create" button for a VM and it looked like that the snapshot to be created was for both the running state of the system and the virtual disks. I am wondering if there is any way to create the snapshot only for the virtual disks of the VM in engine? Do we have future plan to make snapshot for it's disks? -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I create a snapshot for virtual disks only?
On 2012-6-27 23:30, Michal Skrivanek wrote: That would make sense only when you are powered off, wouldn't it? Otherwise what's the point of disk snapshot with open transactions, buffers in mem, etc, without saving the state of the VM too? I understand syncing virtual disk state with the OS cache is a quite challenge to a snapshot tool developers. However, it is a handy feature for the users just want to back up their data in the disks without stopping VM. As other virtualization solution support this feature, we should narrow the gap to attract more users to oVirt. Thanks, michal On 27 Jun 2012, at 17:26, Shu Ming wrote: On 2012-6-27 23:19, Dafna Ron wrote: Hi, no. the snapshot is for the entire vm and it's disks. On 06/27/2012 05:31 PM, Shu Ming wrote: Hi, I am testing oVirt engine 3.1 beta release 06-07. I tried "snapshots-->create" button for a VM and it looked like that the snapshot to be created was for both the running state of the system and the virtual disks.I am wondering if there is any way to create the snapshot only for the virtual disks of the VM in engine? Do we have future plan to make snapshot for it's disks? -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I create a snapshot for virtual disks only?
On 2012-6-27 23:19, Dafna Ron wrote: Hi, no. the snapshot is for the entire vm and it's disks. On 06/27/2012 05:31 PM, Shu Ming wrote: Hi, I am testing oVirt engine 3.1 beta release 06-07. I tried "snapshots-->create" button for a VM and it looked like that the snapshot to be created was for both the running state of the system and the virtual disks.I am wondering if there is any way to create the snapshot only for the virtual disks of the VM in engine? Do we have future plan to make snapshot for it's disks? -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] How can I create a snapshot for virtual disks only?
Hi, I am testing oVirt engine 3.1 beta release 06-07. I tried "snapshots-->create" button for a VM and it looked like that the snapshot to be created was for both the running state of the system and the virtual disks.I am wondering if there is any way to create the snapshot only for the virtual disks of the VM in engine? -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.1 - Error adding host , incorrect vdsm version
I encountered this error in oVirt 3.1 beta release testing. And I changed the vdsm-bootstrap.py in engine similar to the below and it worked. I am also wondering why this bug was not exported to other people. It seems that ovirt node can ignore the vds_bootstrap script running on itself by someway. That maybe the reason the bug was not hit. On 2012-6-20 0:08, Ofer Schreiber wrote: Just checked this issue with latest ovirt-engine on F17 (with vdsm 4.10), and didn't encounter this issue at all. Danken - any idea why? - Original Message - On Mon, Jun 18, 2012 at 04:08:06PM -0500, Trey Dockendorf wrote: On Mon, Jun 18, 2012 at 3:25 PM, Dan Kenigsberg wrote: On Mon, Jun 18, 2012 at 03:01:10PM -0500, Trey Dockendorf wrote: You are right. And it is truly surprising that this bug hasn't been open since we've bumped vdsm version to 4.10. Would you open up this bug, and make it block Bug 822145 - Tracker: oVirt 3.1 release ? The bootstrapping code is a mess. It evolves by adding one ugly patch over the other. In that spirit, would the following patch solve your bootstrapping pains? I actually really really hate the code there, and spent some time suggesting a less bad approach. Would you be kind enough to test http://gerrit.ovirt.org/#/c/5469/ and the 2 patches below it? diff --git a/vds_bootstrap/vds_bootstrap.py b/vds_bootstrap/vds_bootstrap.py index 0df5023..4fcc040 100755 --- a/vds_bootstrap/vds_bootstrap.py +++ b/vds_bootstrap/vds_bootstrap.py @@ -76,11 +76,11 @@ rhel6based = deployUtil.versionCompare(deployUtil.getOSVersion(), "6.0")>= 0 # TODO this is an infra-hackish heuristic for identifying Fedora # drop as soon as possible -fedorabased = deployUtil.versionCompare(deployUtil.getOSVersion(), "16") = 0 +fedorabased = deployUtil.versionCompare(deployUtil.getOSVersion(), "17") = 0 if rhel6based: VDSM_NAME = "vdsm" -VDSM_MIN_VER = VDSM_NAME + "-4.9" +VDSM_MIN_VER = VDSM_NAME + "-4.10" KERNEL_VER = "2.6.32-.*.el6" KERNEL_MIN_VER = 150 MINIMAL_SUPPORTED_PLATFORM = "6.0" Those changes worked, the install is now past that point and installing packages. Bug filed, https://bugzilla.redhat.com/show_bug.cgi?id=833201 Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Sanlock issue when trying to start vm
What is your node? Fedora 16/17 or just ovirt-node? On 2012-6-20 2:36, Dennis Jacobfeuerborn wrote: Hi, after getting the 3.1 beta engine and a host set up I now get an error when trying to start a vm. Engine reports this: VM myvm is down. Exit message: internal error Failed to open socket to sanlock daemon: No such file or directory. On the node no sanlock daemon is running. When I try to start the service I get this: Jun 19 20:22:31 node systemd-sanlock[13607]: Starting sanlock: [ OK ] Jun 19 20:22:31 node sanlock[13621]: 2012-06-19 20:22:31+0200 910 [13621]: sanlock daemon started 2.3 aio 1 10 renew 20 80 host 93bea910-1d9d-4203-8333-beb3d7b92c10.node.local time 1340130151 Jun 19 20:22:31 node sanlock[13621]: 2012-06-19 20:22:31+0200 910 [13621]: set scheduler RR|RESET_ON_FORK priority 99 failed: Operation not permitted Jun 19 20:22:31 node sanlock[13621]: 2012-06-19 20:22:31+0200 910 [13621]: wdmd connect failed for watchdog handling Jun 19 20:22:31 node systemd[1]: sanlock.service: main process exited, code=exited, status=255 Jun 19 20:22:31 node systemd[1]: Unit sanlock.service entered failed state. I followed the SELinux and sanlock threads but I disabled SELinux on the node so that cannot be a reason for this to fail. Regards, Dennis ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Questions about ovirt engine
Hi, I created a VM in my engine. And I found that every time I run the VM after shutdown, the VM uuid was changed to a different not while the VM itself was not changed including the VM name. Why doesn't engine keep the UUID for a VM and use the UUID every time the VM starts? How can I persistent my setting to a VM with "vdsClient", like the password set by the "setVmTicket" command? -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] How can remove the existing isos from engine
Hi, I uploaded several isos to engine by engine-iso-uploader. But, I found that there is no tools to remove the iso from engine or there is no option in engine to remove them. Any clue to remove them? Just remove the iso from the directory where iso domain is mapped? I think it is a bit rude to do that. Is there any graceful way to remove them? -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] SPM host in unknown status
t.org> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] virsh/virt-manager access on nodes.
1) For read only access, you can try "virsh -c qemu:///system -r" 2)For read write access you can try "virsh -c qemu:system", then input authentication name: vdsm@rhevh password: shibboleth On 2012-5-23 23:56, Rahul Upadhyaya wrote: Hi Folks, I was trying to use virt-manager on one of the hosts being managed by the ovirt-manager. It asks for some authentication to connect to libvirt. I get the same thing when I tried to connect via virsh.As I understand , VDSM acquires a lock over libvirt. But is it possible to connect to libvirt (may be only read-only) ?. What authentication does it require ? how do I get the credentials. ? -- Regards, Rahul === ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Host can't join the cluster
Usually, you can have more information in these files: in node host: /var/log/vdsm/log, /vdsm/log/libvirt.log in engine: /var/log/engine.log On 2012-5-16 18:58, ov...@qip.ru wrote: After upgrade of vdsm from 4.9.6-0.196.gitb8b79b5 to 4.9.6-0.201.git98e8078 engine set host in nonoperational mode, the error is "Host kvm04 is compatible with versions (3.0,3.1) and cannot join Cluster Default which is set to version 3.1." -- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] The SPM host node is in unresponsive mode
On 2012-5-15 12:19, Haim Ateya wrote: - Original Message - From: "Shu Ming" To: "users@oVirt.org" Sent: Tuesday, May 15, 2012 4:56:36 AM Subject: [Users] The SPM host node is in unresponsive mode Hi, I attached one host node in my engine. Because it is the only one node, it is automatically the SPM node. And it used to run well in my engine. Yesterday, some errors happened in the network work of the host node. That made the node become "unresponsive" in the engine. I am sure the network errors are fixed and want to bring the node back to life now. However, I found that the only one node could not be "confirm as host been rebooted" and could not be set into the maintenance mode. The reason given there is no active host in the datacenter and SPM can not enter into maintenance mode. It seems that it fell into a logic loop here. Losting network can be quite common in developing environment even in production environment, I think we should have a way to address this problem on how to repair a host node encountering network down for a while. Hi Shu, first, for the manual fence to work ("confirm host have been rebooted") you will need another host in the cluster which will be used as a proxy and send the actual manual fence command. second, you are absolutely right, loss of network is a common scenario, and we should be able to recover, but lets try to understand why your host remain unresponsive after network returned. please ssh to the host and try the following: - vdsClient -s 0 getVdsCaps (validity check making sure vdsm service is up and running and communicate with its network socket from localhost) [root@ovirt-node1 ~]# vdsClient -s 0 getVdsCaps Connection to 9.181.129.110:54321 refused [root@ovirt-node1 ~]# root@ovirt-node1 ~]# ps -ef |grep vdsm root 1365 1 0 09:37 ?00:00:00 /usr/sbin/libvirtd --listen # by vdsm root 5534 4652 0 13:53 pts/000:00:00 grep --color=auto vdsm [root@ovirt-node1 ~]# service vdsmd start Redirecting to /bin/systemctl start vdsmd.service root@ovirt-node1 ~]# ps -ef |grep vdsm root 1365 1 0 09:37 ?00:00:00 /usr/sbin/libvirtd --listen # by vdsm root 5534 4652 0 13:53 pts/000:00:00 grep --color=auto vdsm It seems that VDSM process was gone while libvirtd spawned by VDSM was there. Then I tried to start the VDSM daemon, however it did nothing. After checking the vdsm.log file, the latest message was five hours ago and useless. Also, there was no useful message in libvirtd.log. - please ping between host and engine It works in both ways. - please make sure there is no firewall on blocking tcp 54321 (on both host and engine) No firewall. also, please provide vdsm.log (from the time network issues begun) and spm-lock.log (both located on /var/log/vdsm/). as for a mitigation, we can always manipulate db and set it correctly, but first, lets try the above. Also, there is no useful message in spm-lock.log. The latest message was 24 hours ago. -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] The SPM host node is in unresponsive mode
On 2012-5-15 14:21, Haim Ateya wrote: - Original Message - From: "Shu Ming" To: "Haim Ateya" Cc: "users@oVirt.org" Sent: Tuesday, May 15, 2012 9:03:42 AM Subject: Re: [Users] The SPM host node is in unresponsive mode On 2012-5-15 12:19, Haim Ateya wrote: - Original Message - From: "Shu Ming" To: "users@oVirt.org" Sent: Tuesday, May 15, 2012 4:56:36 AM Subject: [Users] The SPM host node is in unresponsive mode Hi, I attached one host node in my engine. Because it is the only one node, it is automatically the SPM node. And it used to run well in my engine. Yesterday, some errors happened in the network work of the host node. That made the node become "unresponsive" in the engine. I am sure the network errors are fixed and want to bring the node back to life now. However, I found that the only one node could not be "confirm as host been rebooted" and could not be set into the maintenance mode. The reason given there is no active host in the datacenter and SPM can not enter into maintenance mode. It seems that it fell into a logic loop here. Losting network can be quite common in developing environment even in production environment, I think we should have a way to address this problem on how to repair a host node encountering network down for a while. Hi Shu, first, for the manual fence to work ("confirm host have been rebooted") you will need another host in the cluster which will be used as a proxy and send the actual manual fence command. second, you are absolutely right, loss of network is a common scenario, and we should be able to recover, but lets try to understand why your host remain unresponsive after network returned. please ssh to the host and try the following: - vdsClient -s 0 getVdsCaps (validity check making sure vdsm service is up and running and communicate with its network socket from localhost) [root@ovirt-node1 ~]# vdsClient -s 0 getVdsCaps Connection to 9.181.129.110:54321 refused [root@ovirt-node1 ~]# root@ovirt-node1 ~]# ps -ef |grep vdsm root 1365 1 0 09:37 ?00:00:00 /usr/sbin/libvirtd --listen # by vdsm root 5534 4652 0 13:53 pts/000:00:00 grep --color=auto vdsm [root@ovirt-node1 ~]# service vdsmd start Redirecting to /bin/systemctl start vdsmd.service root@ovirt-node1 ~]# ps -ef |grep vdsm root 1365 1 0 09:37 ?00:00:00 /usr/sbin/libvirtd --listen # by vdsm root 5534 4652 0 13:53 pts/000:00:00 grep --color=auto vdsm It seems that VDSM process was gone while libvirtd spawned by VDSM was there. Then I tried to start the VDSM daemon, however it did nothing. After checking the vdsm.log file, the latest message was five hours ago and useless. Also, there was no useful message in libvirtd.log. [HA] problem is systemctl doesn't show real reason why service didn't go, lets try the following: - # cd /lib/systemd/ - # ./systemd-vdsmd restart [root@ovirt-node1 systemd]# ./systemd-vdsmd start WARNING: no socket to connect to vdsm: libvirt already configured for vdsm [ OK ] Starting iscsid: Starting libvirtd (via systemctl): [ OK ] Stopping network (via systemctl): [ OK ] Starting network (via systemctl): Job failed. See system logs and 'systemctl status' for details. [FAILED] Starting up vdsm daemon: vdsm start [ OK ] I did futher test on this system. After I killed the solo libivrtd process, vdsm processs can be started without libvirtd. However, vdsm can not work either in this way. After several round of "killall libvirtd", "service vdsmd start", "vdsmd stop", both vdsm and libivirtd processs now start. In summary: 1) the libvirtd started by vdsm process may stand there even after its parent vdsm process is gone. 2) the legacy libvirtd may block the start process of vdsm service 3) vdsm service can work with the legacy libvirtd sometime without creating a new one. Here are my service process in the host node, please notice that the libvirtd process is earlier than the vdsm process that means this libvirtd was a legacy process not created by the vdsm process in this round. The problem still exist in engine that I don't have a way to reactivate the host node. [root@ovirt-node1 systemd]# ps -ef |grep vdsm root 8738 1 0 14:33 ?00:00:00 /usr/sbin/libvirtd --listen # by vdsm vdsm 9900 1 0 14:35 ?00:00:00 /bin/bash -e /usr/share/vdsm/respawn --minlifetime 10 --daemon --masterpid /var/run/vdsm/respawn.pid /usr/share vdsm/vdsm vdsm 9903 9900 0 14:35 ?00:00:01 /usr/bin/python /usr/share/vdsm vdsm root 9926 9903 0 14:35 ?00:00:00 /usr/bin/sudo -n /usr/bin/python /usr/share/v
Re: [Users] The SPM host node is in unresponsive mode
Some errors in service status, Is engine-notifierd critical to VDSM? Why did it say" pgrep: invalid user name: engine" [root@ovirt-node1 ~]# service --status-all /etc/init.d/ceph: ceph conf /etc/ceph/ceph.conf not found; system is not configured. # Generated by ebtables-save v1.0 on Tue May 15 14:08:06 CST 2012 *nat :PREROUTING ACCEPT :OUTPUT ACCEPT :POSTROUTING ACCEPT pgrep: invalid user name: engine /etc/init.d/engine-notifierd is stopped JAVA_EXECUTABLE or HSQLDB_JAR_PATH in '/etc/sysconfig/hsqldb' is set to a non-file. No active sessions On 2012-5-15 12:19, Haim Ateya wrote: - Original Message ----- From: "Shu Ming" To: "users@oVirt.org" Sent: Tuesday, May 15, 2012 4:56:36 AM Subject: [Users] The SPM host node is in unresponsive mode Hi, I attached one host node in my engine. Because it is the only one node, it is automatically the SPM node. And it used to run well in my engine. Yesterday, some errors happened in the network work of the host node. That made the node become "unresponsive" in the engine. I am sure the network errors are fixed and want to bring the node back to life now. However, I found that the only one node could not be "confirm as host been rebooted" and could not be set into the maintenance mode. The reason given there is no active host in the datacenter and SPM can not enter into maintenance mode. It seems that it fell into a logic loop here. Losting network can be quite common in developing environment even in production environment, I think we should have a way to address this problem on how to repair a host node encountering network down for a while. Hi Shu, first, for the manual fence to work ("confirm host have been rebooted") you will need another host in the cluster which will be used as a proxy and send the actual manual fence command. second, you are absolutely right, loss of network is a common scenario, and we should be able to recover, but lets try to understand why your host remain unresponsive after network returned. please ssh to the host and try the following: - vdsClient -s 0 getVdsCaps (validity check making sure vdsm service is up and running and communicate with its network socket from localhost) - please ping between host and engine - please make sure there is no firewall on blocking tcp 54321 (on both host and engine) also, please provide vdsm.log (from the time network issues begun) and spm-lock.log (both located on /var/log/vdsm/). as for a mitigation, we can always manipulate db and set it correctly, but first, lets try the above. -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] The SPM host node is in unresponsive mode
Hi, I attached one host node in my engine. Because it is the only one node, it is automatically the SPM node. And it used to run well in my engine. Yesterday, some errors happened in the network work of the host node. That made the node become "unresponsive" in the engine. I am sure the network errors are fixed and want to bring the node back to life now. However, I found that the only one node could not be "confirm as host been rebooted" and could not be set into the maintenance mode. The reason given there is no active host in the datacenter and SPM can not enter into maintenance mode. It seems that it fell into a logic loop here. Losting network can be quite common in developing environment even in production environment, I think we should have a way to address this problem on how to repair a host node encountering network down for a while. -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Static IP for VMs
On 2012-5-10 2:08, Itamar Heim wrote: On 05/09/2012 04:43 PM, Shu Ming wrote: On 2012-5-9 18:03, Itamar Heim wrote: On 05/09/2012 12:03 PM, Rahul Upadhyaya wrote: Hi folks, Is there a way to assign a static IP while provisioning a new VM? I do not want to individually go to the console to specify the Static IP address. Is there any means for specifying that from the management UI/ovirt-python-binding to do the same ? -- not yet. ovirt still doesn't handle ip assignments. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Can we create a IP pool in engine and make VDSM to request the IP. Then VDSM assign the IP to guest agent to do the network setup. not yet. engine only deals today with mac address pools, which you can use dhcp to assign. If we don't have such features today, I would like to initiate a new project page about this. The basic idea is: I) Engine should have a pool of IPs. Engine also can assign a specific IP to the VM or assign a random IP in the pool to the VM II) ovirt agent in guest should request the IP from VDSM. And VDSM proxy its request to engine. III)After ovirt agent get the IP, it can configure the system in one time. -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Default storage pool won't activate after reboot
On 2012-5-10 4:02, Haim Ateya wrote: - Original Message - From: "Ian Levesque" To: "Haim Ateya" Cc: users@ovirt.org, "Jacob Wyatt" Sent: Wednesday, May 9, 2012 10:45:40 PM Subject: Re: [Users] Default storage pool won't activate after reboot On May 9, 2012, at 3:34 PM, Haim Ateya wrote: what kind of storage are you using ? NFS or local-domain ? NFS (gluster in the backend). This worked fine until the recent reboot. - please access your NFS storage - change dir to export directory - /vmstore/ovirt - cat the following e12a0f53-ee72-44bc-ad26-93f9b4613c6c/dom_md/metadata CLASS=Data DESCRIPTION=glusternfs IOOPTIMEOUTSEC=10 LEASERETRIES=3 LEASETIMESEC=60 LOCKPOLICY= LOCKRENEWALINTERVALSEC=5 MASTER_VERSION=1 POOL_DESCRIPTION=Default POOL_DOMAINS=82503778-db5d-4ad3-a863-b5484b2a08a1:Active,e12a0f53-ee72-44bc-ad26-93f9b4613c6c:Active POOL_SPM_ID=3 POOL_SPM_LVER=5 POOL_UUID=af5bcc86-898a-11e1-9632-003048c85226 REMOTE_PATH=cmcd-db-vip.in.hwlab:/vmstore/ovirt ROLE=Master SDUUID=e12a0f53-ee72-44bc-ad26-93f9b4613c6c TYPE=NFS VERSION=0 _SHA_CKSUM=c193c6426fd840770124c2b1db81c6138337f2ef the params sent by the manager connecting host to pool fits to what written in metadata, hence, normally, vdsm shouldn't fail. however, could please run the following: - mount command (on host) - if 'cmcd-db-vip.in.hwlab:/vmstore/ovirt' exists, umount it. - restart vdsmd service - try active pool again (from manager) just want to make sure there is no caching issue. please attach logs (vdsm only) after you perform the above. Also, I would like to know the rw attribute of cmcd-db-vip.in.hwlab:/vmstore/ovirt -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Static IP for VMs
On 2012-5-9 18:03, Itamar Heim wrote: On 05/09/2012 12:03 PM, Rahul Upadhyaya wrote: Hi folks, Is there a way to assign a static IP while provisioning a new VM? I do not want to individually go to the console to specify the Static IP address. Is there any means for specifying that from the management UI/ovirt-python-binding to do the same ? -- not yet. ovirt still doesn't handle ip assignments. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Can we create a IP pool in engine and make VDSM to request the IP. Then VDSM assign the IP to guest agent to do the network setup. -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Problems when install ovirt-engine from rpm
On 2012-5-3 10:37, Cao,Bing Bu wrote: Hi, I want to install the ovirt-engine from rpm package. Using the guide on wiki page: http://www.ovirt.org/wiki/Installing_ovirt-engine_from_rpm But when I install the ovirt-engine #sudo yum install -y ovirt-engine reported on error: Installing : ovirt-engine-3.0.0_0001-1.6.fc16.x86_64 1/1 Error unpacking rpm package ovirt-engine-3.0.0_0001-1.6.fc16.x86_64 error: unpacking of archive failed on file /usr/share/jboss-as/modules/org/postgresql/main/postgresql-jdbc.jar;4fa1e777: cpio: mkdir Verifying : ovirt-engine-3.0.0_0001-1.6.fc16.x86_64 1/1 Failed: ovirt-engine.x86_64 0:3.0.0_0001-1.6.fc16 Can anyone tell me what is the matter? I think two reasons are possible: 1)Your file system was full without space. 2)The package was corrupted in the installation process. -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Unable to add fresh oVirt host
How about the ouput of "brctl show" in your ovirt node? It looks like that the right bridge was not created. On 2012-4-27 12:39, Andrey F. wrote: On Thu, Apr 26, 2012 at 8:56 PM, Andrey F. <mailto:ma3ox...@gmail.com>> wrote: Are some more digging. I have discovered the following. It seems that ovirt is not able to create the bridge. What could be off?; could I have missed a configuration step or param somewhere?. Ugh...I've been "over-debugging"...I was running the script wrong. This was getting caught in my params: /tmp/vds_bootstrap_f9c3a003-b221-4f7e-ae14-5b53ce31ab72.py script cmd = ', hense why script was getting returned in this log line: "Fri, 27 Apr 2012 03:33:19 DEBUGgetAddress Entry. url=script" When I run the script correctly, I get the VDS compat output per my original post with nothing in the bootstrap log. is in vds_installer script. It passes "-v" to bootstrap script: Fri, 27 Apr 2012 03:14:12 DEBUGtrying to run /tmp/vds_bootstrap_51b8d414- a8fa-44f9-8613-f7819255d2eb.py script cmd = '/tmp/vds_bootstrap_51b8d414-a8fa-44f9-8613-f7819255d2eb.py -v -O salesforce.com <http://salesforce.com/> -t 2012-04-27T03:12:27 http://mgmt.example.com:8080/Components/vds/ node.example.com <http://node.example.com/> 51b8d414-a8fa-44f9-8613-f7819255d2eb' I was able to figure that out after changing this: except: print main.__doc__ return 0 to this: except Exception, e: print e Why is the exception not printed? Getting this output would have saved my a lot of debugging time I feel :(. It looks like my version of vdsm from rhn: vdsm-4.9-112.6.el6_2.x86_64 is too old for my ovirt which is at version ovirt-engine-3.1.0_0001-1.8.el6.x86_64 built from source. Note, that I used the following answers file to install ovirt: [general] OVERRIDE_IPTABLES=no HTTP_PORT=8080 HTTPS_PORT=8443 MAC_RANGE=00:1A:4A:A8:7A:00-00:1A:4A:A8:7A:FF ORG_NAME=example.com <http://example.com> DC_TYPE=NFS CONFIG_NFS=no NFS_MP= ISO_DOMAIN_NAME= DB_REMOTE_INSTALL=local #DB_HOST=localhost #DB_PORT=5432 HOST_FQDN=mgmt.example.com <http://mgmt.example.com> AUTH_PASS=password DB_LOCAL_PASS=password On Thu, Apr 26, 2012 at 5:31 PM, Andrey F. mailto:ma3ox...@gmail.com>> wrote: I am attempting to add the first host to a newly setup oVirt. Here is the error message that I am getting: 2012-04-27 00:09:23,485 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) [57283fb3] Installation of node.example.com <http://node.example.com>. No meaningful response recieved from Host. (Stage: Running first installation script on Host) The following shows up in engine log before hand or if I try to run the script manually on the oVirt node: /tmp/vds_installer_9b9fdf2c-d3e0-425d-bd05-e4e4e53b6602.py -c 'ssl=true;management_port=54321' -O 'example.com <http://example.com>' -t 2012-04-27T00:09:22 -f /tmp/firewall.conf.9b9fdf2c-d3e0-425d-bd05-e4e4e53b6602 -p 8080 -b -v http://mgmt.example.com:8080/Components/vds/ http://mgmt.example.com:8080/Components/vds/ node.example.com <http://node.example.com> 9b9fdf2c-d3e0-425d-bd05-e4e4e53b6602 False Usage: vds_compat.py [-r rev_num] [-O organizationName] [-t systemTime] [-n netconsole_host:port] [-u (seProductRepo) true|false ] [-f firewall_rules_file ] What can I do to figure what could be wrong? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Importing an existing VM
On 2012-3-30 10:14, Andrey Falko wrote: Hi everyone, I am new to ovirt and can't find any documentation about how to import an existing VM into ovirt. I have a qcow2 image that I know runs under a KVM hypervisor. Ideally there would be a way for me to import it as a template because I plan to create other virtual machines based off this VM. I tried virt-v2v, but it will only work if I have a datacenter setup with NFS. In my case, I have a datacenter setup for local storage hosts. Don's know where are your datacenters. If both of your datacenters are managed by oVirt, You can export the existing VM in datacenter. And then let the other datacenter to import it. Thanks, Andrey ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] OVirt Node must run on FQDN box as well?
In my configuration, I added all the IP to hostname mappings to "/etc/hosts" file in all oVirt node and oVirt engine server. Migration worked fine for me. On 2012-3-26 21:58, Steve Gordon wrote: - Original Message - From: "Garth Keesler" To: users@ovirt.org Sent: Sunday, March 25, 2012 2:28:30 PM Subject: [Users] OVirt Node must run on FQDN box as well? The docs clearly state that the OVirt Engine must run on a box that is fully DNSed, both forward and backward. I've done that but am having trouble connecting a Node box that is not DNSed but does have a static IP. Do I need to DNS the Node box as well? As per Itamar's response this relates to an issue with the version of libvirt that we originally released on, as I understand it even where this applies though not having an FQDN for the node(s) only impacts migration. Not being able to connect the node at all sounds like a different issue. Steve ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] nfs storage domain problems
Is it a master data domain? Does you mean you can not remove the data domain from oVirt engine? It seems that you removed all the meta data there, that will make oVirt engine broken. Maybe you need to cleanup the engine database. On 2012-3-26 18:20, Rene Rosenberger wrote: Hi, ihave set up an nfs export storage domain under /mnt/nfsexport. Then I deleted all folder in there and now it is not longer initialized LI also cant remove it. What can I do to get it working again? Regards, ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] "permission settings on the specified path do not allow access to the storage"
On 2012-3-7 16:34, Moran Goldboim wrote: On 03/06/2012 05:17 PM, Shu Ming wrote: The problem was resloved and It might come from the naming problem using 'data' as domain name. can you please elaborate - i don't know such a limitation, anyhow the error shows a permission problem if this isn't the case we should handle it. Moran. Another possible reason is the owner of "/data" is root.root, though the permission is "777". On 2012-3-6 22:55, Xiaofan wrote: Manually mount and touch with kvm:qemu user/group and see if success? 2012/3/6 Shu Ming: It seems that the problem came from the name of the data domain to be created. I used "data" to be the name. Is "data" a reserved name for the storage domain? On 2012-3-6 17:30, Shu Ming wrote: Hi, My ovirt-engine was setup on a vm host with ip:xxx.xxx.xxx.112. And I am trying to create a new domain with ovirt-engine UI by the "Storage"--> "New Domain". And the following error happened. However I can mount the xxx.xxx.xxx.110:/data by "mount -t nfs xxx.xxx.xxx.110:/data /mnt" manually in the ovirt-engine host, also a new file can be created under the mounted directory with "touch xx". It looks to me that there is no permission problem when I access the remote nfs path manually. So does ovirt-engine enforce additional permission check beside the normal unix file permission check here? [root@ovirt-engine-112 /]# vim /var/log/ovirt-engine/engine.log [root@ovirt-engine-112 /]# vim /var/log/ovirt-engine/engine.log 2012-03-06 00:38:51,165 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (http--0.0.0.0-8080-6) START, ValidateStorageServerConnectionVDSCommand(vdsId = 46a83d56-66d9-11e1-8004-5254009e821b, storagePoolId = ----, storageType = NFS, connectionList = [{ id: null, connection: xxx.xxx.xxx.110:/data };]), log id: 1899002d 2012-03-06 00:38:51,297 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (http--0.0.0.0-8080-6) FINISH, ValidateStorageServerConnectionVDSCommand, return: {----=469}, log id: 1899002d 2012-03-06 00:38:51,300 ERROR [org.ovirt.engine.core.bll.storage.NFSStorageHelper] (http--0.0.0.0-8080-6) The connection with details xxx.xxx.xxx.110:/data failed because of error code 469 and error message is: permission settings on the specified path do not allow access to the storage. verify permission settings on the specified storage path. 2012-03-06 00:38:51,300 WARN [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (http--0.0.0.0-8080-6) CanDoAction of action AddStorageServerConnection failed. Reasons:ACTION_TYPE_FAILED_STORAGE_CONNECTION 2012-03-06 00:38:51,425 INFO [org.ovirt.engine.core.bll.storage.RemoveStorageServerConnectionCommand] (http--0.0.0.0-8080-4) Running command: RemoveStorageServerConnectionCommand internal: false. Entities affected : ID: aaa0----123456789aaa Type: System -- Shu Ming IBM China Systems and Technology Laboratory _______ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] "permission settings on the specified path do not allow access to the storage"
The problem was resloved and It might come from the naming problem using 'data' as domain name. On 2012-3-6 22:55, Xiaofan wrote: Manually mount and touch with kvm:qemu user/group and see if success? 2012/3/6 Shu Ming: It seems that the problem came from the name of the data domain to be created. I used "data" to be the name. Is "data" a reserved name for the storage domain? On 2012-3-6 17:30, Shu Ming wrote: Hi, My ovirt-engine was setup on a vm host with ip:xxx.xxx.xxx.112. And I am trying to create a new domain with ovirt-engine UI by the "Storage"--> "New Domain". And the following error happened. However I can mount the xxx.xxx.xxx.110:/data by "mount -t nfs xxx.xxx.xxx.110:/data /mnt" manually in the ovirt-engine host, also a new file can be created under the mounted directory with "touch xx". It looks to me that there is no permission problem when I access the remote nfs path manually. So does ovirt-engine enforce additional permission check beside the normal unix file permission check here? [root@ovirt-engine-112 /]# vim /var/log/ovirt-engine/engine.log [root@ovirt-engine-112 /]# vim /var/log/ovirt-engine/engine.log 2012-03-06 00:38:51,165 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (http--0.0.0.0-8080-6) START, ValidateStorageServerConnectionVDSCommand(vdsId = 46a83d56-66d9-11e1-8004-5254009e821b, storagePoolId = ----, storageType = NFS, connectionList = [{ id: null, connection: xxx.xxx.xxx.110:/data };]), log id: 1899002d 2012-03-06 00:38:51,297 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (http--0.0.0.0-8080-6) FINISH, ValidateStorageServerConnectionVDSCommand, return: {----=469}, log id: 1899002d 2012-03-06 00:38:51,300 ERROR [org.ovirt.engine.core.bll.storage.NFSStorageHelper] (http--0.0.0.0-8080-6) The connection with details xxx.xxx.xxx.110:/data failed because of error code 469 and error message is: permission settings on the specified path do not allow access to the storage. verify permission settings on the specified storage path. 2012-03-06 00:38:51,300 WARN [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (http--0.0.0.0-8080-6) CanDoAction of action AddStorageServerConnection failed. Reasons:ACTION_TYPE_FAILED_STORAGE_CONNECTION 2012-03-06 00:38:51,425 INFO [org.ovirt.engine.core.bll.storage.RemoveStorageServerConnectionCommand] (http--0.0.0.0-8080-4) Running command: RemoveStorageServerConnectionCommand internal: false. Entities affected : ID: aaa0----123456789aaa Type: System -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] "permission settings on the specified path do not allow access to the storage"
It seems that the problem came from the name of the data domain to be created. I used "data" to be the name. Is "data" a reserved name for the storage domain? On 2012-3-6 17:30, Shu Ming wrote: Hi, My ovirt-engine was setup on a vm host with ip:xxx.xxx.xxx.112. And I am trying to create a new domain with ovirt-engine UI by the "Storage"--> "New Domain". And the following error happened. However I can mount the xxx.xxx.xxx.110:/data by "mount -t nfs xxx.xxx.xxx.110:/data /mnt" manually in the ovirt-engine host, also a new file can be created under the mounted directory with "touch xx". It looks to me that there is no permission problem when I access the remote nfs path manually. So does ovirt-engine enforce additional permission check beside the normal unix file permission check here? [root@ovirt-engine-112 /]# vim /var/log/ovirt-engine/engine.log [root@ovirt-engine-112 /]# vim /var/log/ovirt-engine/engine.log 2012-03-06 00:38:51,165 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (http--0.0.0.0-8080-6) START, ValidateStorageServerConnectionVDSCommand(vdsId = 46a83d56-66d9-11e1-8004-5254009e821b, storagePoolId = ----, storageType = NFS, connectionList = [{ id: null, connection: xxx.xxx.xxx.110:/data };]), log id: 1899002d 2012-03-06 00:38:51,297 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (http--0.0.0.0-8080-6) FINISH, ValidateStorageServerConnectionVDSCommand, return: {----=469}, log id: 1899002d 2012-03-06 00:38:51,300 ERROR [org.ovirt.engine.core.bll.storage.NFSStorageHelper] (http--0.0.0.0-8080-6) The connection with details xxx.xxx.xxx.110:/data failed because of error code 469 and error message is: permission settings on the specified path do not allow access to the storage. verify permission settings on the specified storage path. 2012-03-06 00:38:51,300 WARN [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (http--0.0.0.0-8080-6) CanDoAction of action AddStorageServerConnection failed. Reasons:ACTION_TYPE_FAILED_STORAGE_CONNECTION 2012-03-06 00:38:51,425 INFO [org.ovirt.engine.core.bll.storage.RemoveStorageServerConnectionCommand] (http--0.0.0.0-8080-4) Running command: RemoveStorageServerConnectionCommand internal: false. Entities affected : ID: aaa0----123456789aaa Type: System -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] "permission settings on the specified path do not allow access to the storage"
Hi, My ovirt-engine was setup on a vm host with ip:xxx.xxx.xxx.112. And I am trying to create a new domain with ovirt-engine UI by the "Storage"--> "New Domain". And the following error happened. However I can mount the xxx.xxx.xxx.110:/data by "mount -t nfs xxx.xxx.xxx.110:/data /mnt" manually in the ovirt-engine host, also a new file can be created under the mounted directory with "touch xx". It looks to me that there is no permission problem when I access the remote nfs path manually. So does ovirt-engine enforce additional permission check beside the normal unix file permission check here? [root@ovirt-engine-112 /]# vim /var/log/ovirt-engine/engine.log [root@ovirt-engine-112 /]# vim /var/log/ovirt-engine/engine.log 2012-03-06 00:38:51,165 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (http--0.0.0.0-8080-6) START, ValidateStorageServerConnectionVDSCommand(vdsId = 46a83d56-66d9-11e1-8004-5254009e821b, storagePoolId = ----, storageType = NFS, connectionList = [{ id: null, connection: xxx.xxx.xxx.110:/data };]), log id: 1899002d 2012-03-06 00:38:51,297 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (http--0.0.0.0-8080-6) FINISH, ValidateStorageServerConnectionVDSCommand, return: {----=469}, log id: 1899002d 2012-03-06 00:38:51,300 ERROR [org.ovirt.engine.core.bll.storage.NFSStorageHelper] (http--0.0.0.0-8080-6) The connection with details xxx.xxx.xxx.110:/data failed because of error code 469 and error message is: permission settings on the specified path do not allow access to the storage. verify permission settings on the specified storage path. 2012-03-06 00:38:51,300 WARN [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (http--0.0.0.0-8080-6) CanDoAction of action AddStorageServerConnection failed. Reasons:ACTION_TYPE_FAILED_STORAGE_CONNECTION 2012-03-06 00:38:51,425 INFO [org.ovirt.engine.core.bll.storage.RemoveStorageServerConnectionCommand] (http--0.0.0.0-8080-4) Running command: RemoveStorageServerConnectionCommand internal: false. Entities affected : ID: aaa0-0000-0000-0000-123456789aaa Type: System -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Network configuration
On 2012-3-3 17:47, Dan Yasny wrote: - Original Message - From: "Andrew James Dunlop" To: users@ovirt.org Sent: Monday, 6 February, 2012 11:45:20 PM Subject: [Users] Network configuration I feel like I have been bombarding this list the last few days, sorry! I have been looking at the different possible network configurations shown at http://www.ovirt.org/wiki/Vdsm_Network and trying to work out how to achieve the second topology ( bridge over vlan over nic ). I can see that it is possible to assign a logical network to a physical network on a node but how can you add more than one as this is a dropdown menu? My nodes have two NICs, one of these is for the management network but I could like to have a number of logical networks (with different VLAN tags) connected to the other NIC. Is this currently possible using the web UI? Very simple 1. create your logical networks with vlan tags in the data centre 2. assign those networks to the relevant cluster Now, assuming we are going to assign network X with tag 100 and network Y with tag 200 to eth0 on a host: Edit eth0 on the host - assign network X to it see how eth0.100 gets created and the X network attached ot that tagged interface Edit eth0 again, assign network Y see how eth0.200 gets created and Y is attached repead for additional tagged networks Yes, we can do these manually if we are the master of the system administrator. But I think we should provide a UI to the user and VDSM management API in the backend. Also, it is a quite a challenge to assign the VMs in different host to the same vlan. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] admin password problmes
On 2012-2-27 6:04, Nathan Stratton wrote: I have been working on building a new ovirt-engine from an old, everything looks good, but I can't log in: 2012-02-26 21:59:39,086 ERROR [org.ovirt.engine.core.bll.LoginAdminUserCommand] (http--0.0.0.0-8080-1) USER_FAILED_TO_AUTHENTICATE : admin 2012-02-26 21:59:39,089 WARN [org.ovirt.engine.core.bll.LoginAdminUserCommand] (http--0.0.0.0-8080-1) CanDoAction of action LoginAdminUser failed. Reasons:USER_FAILED_TO_AUTHENTICATE I have tried using ovirt-setup again, but that does not help. I also have tried: engine-config -l AdminPassword="password" Have you tried engine-cleanup before engine-setup? <> Nathan StrattonCTO, BlinkMind, Inc. nathan at robotics.net nathan at blinkmind.com http://www.robotics.nethttp://www.blinkmind.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Virtual CPU
On 2012-2-20 2:02, зоррыч wrote: Hi I set uptwonodesrunningovirt. The configuration ofboth serversis identical (node.png). when you create avirtual machine toasetting is per(vm.png). It runssuccessfully. Ifthe setting"Number of CPUCres," set to3(1Socket (s),3Core (s) per Socket) (fail.png) - VMwill not start.ovirterror: “Cannot run VM.There are no available running Hosts with enough cores in VM's Cluster.” Why not? Do I understand correctlythat the value of(1Socket (s),3Core (s) per Socket)means 3virtualCPU onaphysicalprocessor corenodes? Number of CPUCres: 2 (2Socket (s),1Core (s) per Socket) -the virtual machineis startedsuccessfully Number of CPUCres: 4 (2 Socket (s),2Core (s) per Socket) -error. Number of CPUCres: 2 (1 Socket (s),2Core (s) per Socket) -the successful launch ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users The number of active VMs is bigger than the physical cores in the host. -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt Engine as a VM
On 2012-2-19 2:16, Nathan Stratton wrote: Had anyone created a how to or notes on how to manage an ovirt engine as a guest on the cluster? This should be possible, when the cluster is powered up for the first time it would require some specialized instructions to fire up the ovirt engine on a node. Does the guest(VM) hosting the ovirt-engine be managed by the ovirt-engine? If It does, it looks like a logical loop here. Say, if the ovirt-engine stop the hosting VM, the ovirt-engine will also be stopped. P.S. Are there any plans for redundant ovirt engines in the works? <> Nathan StrattonCTO, BlinkMind, Inc. nathan at robotics.net nathan at blinkmind.com http://www.robotics.nethttp://www.blinkmind.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Shu Ming IBM China Systems and Technology Laboratory ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users