[Elecraft] (no subject)

-- mvg carlos popelier regards carlos popelier __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.q

[Elecraft] (no subject)

Need to thin the herd a little. - Elecraft W2 power/SWR meter, - 2 sensors - 200 W & 2 kW - sensor cables (RJ45-RJ45) 2x - USB cable (USB-A - 3.5mm TRS ) - power cable, APP terminated. Asking $600. 73, de KU1T _zjt -- Zbignie

[Elecraft] (no subject)

hi to all i have just installed 2m module into my KX3, it works very fine in rx but when i go to transmit i listen noise very high into speaker e during the trasmission the noise change e appear the hi current indication like an autoscillating of final stage. apparently all work, in rx positio

[Elecraft] (no subject)

Greetings All Thank you to everyone who has responded to my initial question regarding the subject listed above. I now have LOTS of tracks to follow to achieve my goal of remote-ing my station at the Summer QTH for winter operation from the snowbird QTH. I have the KPA/KTA-500's controlled by

[Elecraft] (no subject)

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: ht

Re: [Elecraft] (no subject)

Click on the Home link that is at the bottom of every post. Use that to unsubscribe or change your settings. 73, Don W3FPR On 1/17/2021 8:09 PM, Keith Lamonica wrote: KEITH, HOW DO I UNSUBSCRIBE? __ Elecraft mailing list Home: http

[Elecraft] (no subject)

KEITH, HOW DO I UNSUBSCRIBE? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please he

[Elecraft] (no subject)

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: ht

[Elecraft] (no subject)

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: ht

[Elecraft] (no subject)

set delivery off end __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

[Elecraft] (no subject)

73, Ed - KL7UW http://www.kl7uw.com Dubus-NA Business mail: dubus...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.

[Elecraft] (no subject)

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: ht

Re: [Elecraft] (no subject)

In actual usage, I get about 250W - 300W out from my KPA500 when driven with 15W from my KX3. I use it in my RV station, description linked to on my qrz.com page. 73, Mark W7MLG On Sat, May 16, 2020 at 1:40 PM Edward R Cole wrote: > > Just read the KX3 (with upgraded firmware) does 15w outpu

[Elecraft] (no subject)

Just read the KX3 (with upgraded firmware) does 15w output, so 31.6* x 15w = 474w from a KPA500; *15-dB. I have the KX3 but not the KPA500. 73, Ed - KL7UW From: "hawley, charles j jr" To: Tommy Judson Cc: Edward via Elecraft Subject: Re: [Elecraft] Availability I think I would get the K

Re: [Elecraft] (no subject)

rom: elecraft-boun...@mailman.qth.net On > Behalf Of Edward R Cole > Sent: 05 July 2019 18:02 > To: Elecraft Reflector > Subject: [Elecraft] (no subject) > > Kjeld, > > I agree with Conrad PA5Y, both Kuhne Engineering or HA1YA make very good > transverters

Re: [Elecraft] (no subject)

2019 18:02 To: Elecraft Reflector Subject: [Elecraft] (no subject) Kjeld, I agree with Conrad PA5Y, both Kuhne Engineering or HA1YA make very good transverters and are available in EU. I would add the DEMI L-series transverter which now is made by a company called Q5 (located in US) for any

[Elecraft] (no subject)

Kjeld, I agree with Conrad PA5Y, both Kuhne Engineering or HA1YA make very good transverters and are available in EU. I would add the DEMI L-series transverter which now is made by a company called Q5 (located in US) for any NA hams reading the mail on this topic. I use DEMI transverters o

Re: [Elecraft] (no subject)

Internal NiMH?Eneloop Pro. On Mon, Jun 24, 2019 at 19:27 Ron Bell via Elecraft < elecraft@mailman.qth.net> wrote: > Best KX3 batteries? > > My old rechargeable batteries are failing. Recommdation for replacements? > __ > Elecraft m

Re: [Elecraft] (no subject)

Most people use the Eneloop Pro batteries for the internal set. They have good capacity, low self-discharge, and are unlikely to leak. $33 for an eight-pack at Amazon. https://smile.amazon.com/gp/product/B00MXCIK32/ wunder K6WRU Walter Underwoo

[Elecraft] (no subject)

Best KX3 batteries? My old rechargeable batteries are failing. Recommdation for replacements? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@m

Re: [Elecraft] (no subject)

I was using my regular wire-in-a-tree antenna this morning, and couldn’t get it back out. If I’d had my 14-year-old son with me, he could’ve climbed up and retrieved it. I wasn’t feeling so frisky. So I just got out the AX1 and used that instead. Conditions are pretty good in WPX. Wayne, N6KR

[Elecraft] (no subject)

Wayne, What exactly is this regarding abt the AX1? The radial was lost in a tree? I didn't understand what happened... 73's Mike AB7RU Date: Sat, 25 May 2019 08:59:03 -0700 Subject: [Elecraft] Another ideal scenario for the AX1 antenna ...the tree ate your wire. Long, sad story. Wayne, N6KR __

[Elecraft] (no subject)

Hello, There is a new version of Win4K3Suite available, version 2.004. Win4K3Suite is a full featured control program for the K3/S, KX3 and KX2. It has a built in Panadapter that works with LPPAN and a sound card, as well as the SDRPlay RSP's. It supports the KAT500, KPA500/1500 and the KXPA100

[Elecraft] (no subject)

OEMs have gone back and forth over the years with the "one true ground" vs completely distributed grounding via the chassis. They seem to currently be in the phase of using distributed localized grounding points (with several ground return wires per location), a kind of hybrid grounding system, if

Re: [Elecraft] (no subject)

Debunked too many times to mention. On 3/22/2019 11:03 AM, TJ Campie wrote: You do not need to run 250w on ft8 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] (no subject)

I strongly agree with this. Years ago, I had a similar experience with JT65 on 160M in a sked with a station in ND. He decoded at -12 and said he was running 40 or 50W, so I called him at that power level. No response, so I increased power in 2X (3dB) steps until he answered. I had to get to th

Re: [Elecraft] (no subject)

Tom, Where did you come up with one does not need to run more than 250 W using FT8??  I have never read that anywhere in the literature I have read about FT8. How many countries have you worked on 160M using 50 or so watts?  I have worked more than one country on 160M using 1500 watts feeding a p

Re: [Elecraft] (no subject)

Actually if you are trying to work a station who is -24 and that station is running 1500 watts then you probably won’t work him with 250 watts. It is a weak signal mode. Run power appropriate to what is needed to make a contact. Now if that station at 1500 watts is +10 then you can work him o

Re: [Elecraft] (no subject)

...@mailman.qth.net On Behalf Of TJ Campie Sent: Friday, March 22, 2019 18:03 To: Elecraft Subject: [Elecraft] (no subject) You do not need to run 250w on ft8 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] (no subject)

You do not need to run 250w on ft8 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please

[Elecraft] (no subject)

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: ht

[Elecraft] (no subject)

http://novel.gatecreeper.com Mike Furrey __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl

[Elecraft] (no subject)

For ideas on how to use TX INHIBIT: http://www.kl7uw.com/TX-INHIBIT.htm I do exactly as Don suggests; connect KEYOUT to sequencer input and last stage of sequencer is "K4" shown in the Inhibit diagram on my webpage. For ideas on building your computer/radio I/F: http://www.kl7uw.com/Digital_I-

[Elecraft] (no subject)

Don, You asked: Did you have the front panel board isolated from the other boards when you made those resistance measurements? If not, that is sufficient reason for the low resistances. 73, Don W3FPR Yes, the Front Panel board was by apart from the rest of the radio w

[Elecraft] (no subject)

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: ht

Re: [Elecraft] (no subject)

Mike, Most SDR “hacking” unless those very hardcore people with good RF building skills takes place on the I/Q (SDR Output) data. I would point you in the path of GNU-Radio which offers IMHO the easiest path to SDR processing for learning DSP processing and implementation. Depe

Re: [Elecraft] (no subject)

Mike, The Elecraft gear is software defined radio, but the software is not open source and not available for modification by the user. Software changes may be requested of the developers, and some may be implemented if the user audience that will use those added functions is sufficiently lar

[Elecraft] (no subject)

Hello Elecraft group, I don't own anything made by Elecraft yet however I have been shopping for an HF rig to get active again (I have been off the air for a number of years for personal reasons). I really like Elecraft's products, and I am intrigued by the 'software definable radio' possibilities

[Elecraft] (no subject)

I can add that serious eme'rs have gone the route of using transverters with better quality HF radios on the IF. I had a FT-847 (HF/50/144/432) all-mode radio bought in 1998 for both satellite and 2m-eme. But it was disappointing on HF, plus not all that great on CW-eme. It was a very nice r

[Elecraft] (no subject)

If you want to be sure you'll have a successful outing with the declining band conditions you could consider a crankIR. Its not the lightest or easiest to deploy but it could very well be the best performing portable self supporting antenna out there. Once set up its fully resonant on your ban

[Elecraft] (no subject)

Gesendet mit der GMX iPhone App __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please

Re: [Elecraft] (no subject)

Hi Wayne, thanks for this. I see the advantage now that I see the schematic for the BL2 (although the switch is not shown in the circuit). The common mode to differential mode isolation right at the BNC connector alone could help out. OK this is on my list to pick up when I see you next at Dayt

Re: [Elecraft] (no subject)

This will vary from one installation to the next. When I'm not traveling ultralight, I carry a BL2 balun with me. The BL2 has a 4:1 / 1:1 switch so you can try both positions. This will almost always expand the range of bands you can cover with a given ad-hoc antenna. As noted, the balun also

[Elecraft] (no subject)

Hi Wayne, If we're connecting the random wire and counterpoise directly to the kx2 or Kx3 bnc via the binding post adapter is a 9:1 an improvement or is the tuner able to drive it directly just the same? Thanks and Regards, Brian ve3bwp > Message: 17 > Date: Sun, 29 Jan 2017 18:52:26 -0800 >

[Elecraft] (no subject)

Hi Wayne, If we're connecting the random wire and counterpoise directly to the kx2 or Kx3 bnc via the binding post adapter is a 9:1 an improvement or is the tuner able to drive it directly just the same? Thanks and Regards, Brian ve3bwp Message: 17 Date: Sun, 29 Jan 2017 18:52:26 -0800 From:

Re: [Elecraft] (no subject)

Hi Ed, and all. I'm not sure where the confusion lies, perhaps I did not communicate well. I'm not seeing any problem. I have my rig control settings exactly as recommended in the WSJT-X user guide. All I wanted to point out is whether the use of VOX as reported was the cause for the loss of TX

[Elecraft] (no subject)

Nate, I have WSJT-X v1.7.0 installed so I looked at my transmit frequency with Split set to "Rig" on the settings/Radio tab. I see the K3 transmit 1.2 KHz high which is correct since JT65 uses a 1220 Hz tone modulated onto the carrier in USB mode. I then tested with Split set to None and see th

[Elecraft] (no subject)

John... Peace Through Strength __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Pleas

Re: [Elecraft] (no subject)

Danny, You will find that in the firmware release notes. This one is from MCU 5.33 dated Aug 2015. "To turn on safe mode on/off, go into CONFIG:PTT-KEY and tap '1' to select "USB SAFE" or "UNSAFE". Exit the menu and turn the K3S off/on." When upgrading firmware, it is always a good idea to r

Re: [Elecraft] (no subject)

I have the same problem. There is a Safe Mode (somewhere?) which allows you to do this, otherwise the K3S goes to transmit when controlled by USB and the PC is turned off. Regards, Danny Higgins From: Jeff Sent: 24 October 2016 14:24 To: Elecraft@mailman.qth.net Subject: [Elecraft] (no

Re: [Elecraft] (no subject)

Did you use the K3S' Power Button to power down? If not, settings may not be saved. Jim Finan AB4AC  Sent from my BlackBerry 10 smartphone.   Original Message   From: Jeff Sent: Monday, October 24, 2016 9:25 AM To: Elecraft@mailman.qth.net Reply To: Jeff Subject: [Elecraft] (no subject)

Re: [Elecraft] (no subject)

[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Monday, October 24, 2016 5:14 PM To: Jeff ; Elecraft@mailman.qth.net Subject: Re: [Elecraft] (no subject) Jeff, I have no idea what you are doing wrong, but here are a few thoughts: After making the menu change, are you exiting from

Re: [Elecraft] (no subject)

" <4z...@bezeqint.net> To: "elecraft" Sent: Monday, October 24, 2016 10:28:25 AM Subject: Re: [Elecraft] (no subject) Hello. Have check now and find - PTT setting is not saved. I have set it to RTS-OFF, after turning off (by power button, not by power supply) and t

Re: [Elecraft] (no subject)

Jeff, I have no idea what you are doing wrong, but here are a few thoughts: After making the menu change, are you exiting from the menu? Tap the MENU button. Are you 'pulling the plug" when you say you turn the radio off and back on? Just like your computer, you must use the POWER button if th

[Elecraft] (no subject)

Good morning. I am having a problem getting my K3S to save in the config menu the setting for PTT-PTT. When I set it for RTS-DTR, hit menu it works fine. Then I turn the radio off and back on and the PTT-PTT setting is back to OFF-OFF. What am I doing wrong? How do I get the Config menu to sav

[Elecraft] (no subject)

Kevin, I agree. I'd guess digital modes will not be embedded into the K3xs (I made that model up) until after the "touch screen" is added and external computer screen driver. But if you need an external screen then why not just use a computer with the K3, K3s, KX3 as its done now. I use my

[Elecraft] (no subject)

Since Elecraft has (repeatedly) stated no KPA1500 is to be made, then consider other sources. I suggest if you want to save money to consider a W6PQL amp: http://www.w6pql.com/1_kw_sspa_for_1_8-54_mhz.htm Note the pic of a KX3 at beginning of article. Great kit if you are so disposed; I believe

[Elecraft] (no subject)

In my KX2 SN 567, I removed the BPF and KXAT2 boards in order to install the Gem Products replacement side plates. I had no trouble installing these on my KX3 and really like them. One article by KE4RG states that this procedure for the KX2 is "not for the timid," and I would now concur. Aft

[Elecraft] (no subject)

Hello Bill I am interest in the J38 you have for sale.I can paypal to your email address.what are the details. Ron AK4JL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] (no subject)

Charlie, Makes me smile. Some die-hard CW eme operator claim that JT65 operators are playing bag-pipes! Guess it goes with one's interpretation/experience 73, Ed - KL7UW HS Clarinet player From: "Charlie T, K3ICH" To: Subject: Re: [Elecraft] KX3 Carrying Case Message-ID: <011201d195d8$5

Re: [Elecraft] (no subject) [FLDIGI vs P3]

lecraft-boun...@mailman.qth.net] On Behalf Of Richard W Hemingway Sent: Friday, April 08, 2016 12:29 PM To: Elecraft Reflector Subject: [Elecraft] (no subject) Hi,I am rather new to this forum. I have recently bought a K3S and am thinking of buying both the P3 and the P3VGA. Presently

Re: [Elecraft] (no subject) [FLDIGI vs P3]

-boun...@mailman.qth.net] On Behalf Of > > Richard W Hemingway > > Sent: Friday, April 08, 2016 12:29 PM > > To: Elecraft Reflector > > Subject: [Elecraft] (no subject) > > > > Hi,I am rather new to this forum. I have recently bought a K3S and am > thinking &g

Re: [Elecraft] (no subject) [FLDIGI vs P3]

016 12:29 PM > To: Elecraft Reflector > Subject: [Elecraft] (no subject) > > Hi,I am rather new to this forum. I have recently bought a K3S and am > thinking > of buying both the P3 and the P3VGA. Presently, I am using Fldigi on my > computer and mostly operatewith PSK and s

[Elecraft] (no subject)

Hi,I am  rather new to this forum.  I have recently bought a K3S and am thinking of buying both the P3 and the P3VGA.  Presently, I am using Fldigi on my computer and mostly  operatewith PSK and sometimes some CW. If I buy these am I being redundant or does it make sense to buy them?  I am hopin

Re: [Elecraft] (no subject)

Richard, Those are two totally different things. The P3 display will show you the PSK or RTTY internal decode on the P3 display, and you can send RTTY or PSK from the K3 paddles by keying CW characters. With the SVGA option for the P3, you can use a keyboard to send those characters. Using t

[Elecraft] (no subject)

Hi, I am new to the list.  I have a K3S which I use Fldigi with.  I am thinking of getting the P3.  Is it better than Fidigi, what are the differences Thanks, Dick N5XRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listin

[Elecraft] (no subject)

If I might inject a suggestion/observation: If you are looking for 0 to 100km 100% reliable propagation it is to be found on 600 meters! I ran tests all summer long in 2012 on 495-KHz CW running 100w into an inverted-L and was copied at 30-35 dB SNR any time we tried over a 70mi path. That is

[Elecraft] (no subject)

Vic, Thought a bit more after my private reply I sent you, yesterday. Of course, I agree with you that using a simple RF sensed PTT is hard on amplifier and TR switch. My reply was to a question how to build an RF sense ckt and not how to design one into an existing amplifier. One usually fi

Re: [Elecraft] (no subject)

Jeff, I am not sure you want Diversity. I would suggest you turn the SUB on (not Diversity) by tapping the SUB button (HOLD will get you into Diversity). With the SUB on, tune to your receive frequency with the VFO A knob. Then tap A > B twice to transfer the frequency, mode, etc to VFO B

[Elecraft] (no subject)

Can someone please help me understand if I am doing this correctly? I want to RX in diversity and run split more than 10 KHz.? I have my main RX on 1.8245, then press split button and set the B VFO to 1.835. Then I turn on the 2nd RX in diversity, press b-set and use the B VFO to move it to 1

Re: [Elecraft] (no subject)

On Feb 14, 2016 15:46, "michealgee" wrote: > > > > Sent from Samsung Mobile > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qt

[Elecraft] (no subject)

Sent from Samsung Mobile __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help s

[Elecraft] (no subject)

Very similar to the MFJ is the Arrow satellite beam: 3-elem 2m/6-elem 70cm. You can assemble only the 2m elements if you are noise source hunting. KX3 on batteries is excellent radio to use. Add a step attenuator to reduce noise level when you are getting close. http://www.arrowantennas.com/

Re: [Elecraft] (no subject)

Tnx to Bill, NR4C for figuring out my problem and offer solution, I'm back in business.. 73 Jeff W7JW -Original Message- From: Jeff Sent: Saturday, October 17, 2015 2:55 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] (no subject) Help please. I’m running N1MM through USB

[Elecraft] (no subject)

Help please. I’m running N1MM through USB comm port to K3s and can’t key the rig on CW from N1MM. I seem to have CAT control of QRG, modes and audio as I can use MMTTY from within N1MM on RTTY (not VOX). Comm port is defined as suggested in N1MM but K3s is config PTT-KEY “OFF-OFF”. I don’t kn

[Elecraft] (no subject)

Fascinating what kind of off topic crap is tolerated on this reflector while other posts are simply censored & censored as in never posted. It reminds me a bit of when one of the right wing whack-a-doodle AM talk hosts mistakenly allows a listener with a brain through the screen and puts them on

Re: [Elecraft] (no subject)

Congratulations! You passed! Ian, KM4IK On Oct 6, 2015 12:27 PM, "Jeff" wrote: > Test de W7JW > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:

[Elecraft] (no subject)

Test de W7JW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this ema

Re: [Elecraft] (no subject)

On Fri,9/18/2015 1:46 PM, Wes (N7WS) wrote: My experience (admittedly ancient) is that good quality and Mirage said in the same sentence is an oxymoron, or in other words, a mirage. Wes, Do you include the original ('70s vintage from NorCal) in that assessment? 73, Jim ___

Re: [Elecraft] (no subject)

My experience (admittedly ancient) is that good quality and Mirage said in the same sentence is an oxymoron, or in other words, a mirage. RF Concepts amps were fine. On 9/17/2015 10:30 PM, Jim Brown wrote: On Thu,9/17/2015 8:40 PM, jmlow...@sbcglobal.net wrote: The only problem is, an amplifi

Re: [Elecraft] (no subject)

On Thu,9/17/2015 8:40 PM, jmlow...@sbcglobal.net wrote: The only problem is, an amplifier to bring the 2m power output of the 2m option for the K3(S) up to 120w or so is around $650 (looking at Mirage) and 120w is not all that much power, absent an antenna with very high gain. Remember I sai

[Elecraft] (no subject)

Well, Dave, your observations have caused me to take a second look at the K3(S) with transverters for VHF/UHF weak-signal work. The only problem is, an amplifier to bring the 2m power output of the 2m option for the K3(S) up to 120w or so is around $650 (looking at Mirage) and 120w is not all

[Elecraft] (no subject)

On Tue,9/15/2015 3:44 PM, ae...@carolinaheli.com wrote: I may be off base but seems to me if you have RF in the shack you really have a lot more to worry about than twisting power cables ? Not necessarily. Some gear is more susceptible that others. And if your antenna is radiating, and if it'

[Elecraft] (no subject)

set authenticate *8711w5gai* set digest mime end __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] (no subject)

Jim and any others interested: http://www.amsat.org/?p=1489 An article written in 1994 on the principle I was alluding to. Way-back in 1999, AA2TX wrote Instatune which performed this for the FT-847. KB5MU writes in 1999 that several other programs have this feature (but the link is broken

[Elecraft] (no subject)

Sent from my Verizon Wireless 4G LTE smartphone __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: ht

[Elecraft] (no subject)

Test - Original Message - From: elecraft-boun...@mailman.qth.net To: krenner1...@msn.com Sent: Friday, February 13, 2015 9:57 AM Subject: Elecraft@mailman.qth.net mailing list r

[Elecraft] (no subject)

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: htt

Re: [Elecraft] (no subject)

> But no longer do you need to run a dozen "pills" (man I hate that > term). Here is all you need for 1250w 1.8-600 MHz: Unfortunately, the LDMOS device data sheets provide *no* IMD spec's for linear operation. The only data is for CW and pulse service. If one is to extrapolate from similar L

[Elecraft] (no subject)

FWIW I am running the AN-762 at 140w using 12v with either the K3 or KX3 with no complaints. It takes only 3.5w drive on 20m. But no longer do you need to run a dozen "pills" (man I hate that term). Here is all you need for 1250w 1.8-600 MHz: The MRFE6VP61K25HR6 1.25KW LDMOS from Freescale

Re: [Elecraft] (no subject)

I would hope we're all smart enough to not even click on the links. There are too many "browse-by" viruses out there. On 10/20/2014 9:30 AM, Guy Olinger K2AV wrote: This would be from someone whose email has been hacked. It's spam for a diet product. 73, Guy __

Re: [Elecraft] (no subject)

This would be from someone whose email has been hacked. It's spam for a diet product. 73, Guy On Mon, Oct 20, 2014 at 11:11 AM, Tom via Elecraft wrote: > http://prestige-kmv.com/images/thats.php?4pokye0goxs20 > > > > > > > > > > > > > Tom Maxwell > maxwel...@aol.com > > > > > > _ > Too

Re: [Elecraft] (no subject)

http://prestige-kmv.com/images/thats.php?4pokye0goxs20 Tom Maxwell maxwel...@aol.com _ Too clever is dumb. -- Ogden Nash __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://

[Elecraft] (no subject)

Howdy Pacific North West folks, www.GEMSproducts.com the Side KX stuff for both the KX3 and now PX3 will be at the Pacificon convention in Santa Clara this weekend see me in the Elecraft Booth. 73 Scott AK6Q __ Elecraft mailing list Ho

[Elecraft] (no subject)

I have 162.425 programmed in my KX3-2M and works just fine! The NOAA station is only 20 miles away and received at S7 with a base station vertical at 20-feet. I was initially frustrated by the memory editor but found that I could direct enter the frequency following the steps in the KX3 manu

[Elecraft] (no subject)

Sent from Samsung Mobile __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help s

Re: [Elecraft] (no subject)

Try a parameter initialization. While holding the LABELS key, tap the POWER switch, which will turn the P3 on if it was off. After about 2 seconds you should see "CONFIGURATION RESET" on the screen and you can release the LABELS key. Alan N1AL On 06/24/2014 08:33 PM, Hisashi T Fujinaka wro

[Elecraft] (no subject)

Well that was pleasant. I was making a band change (chasing W1AW/3 and W1AW/9) and my P3 with P3SVGA went into a screen that said something like "Ready to load Firmware." I tried to load the firmware but at the power-cycle I got the screen: = FATAL ERROR In: ddc_set_coef() span=0

Re: [Elecraft] (no subject)

gt; Memories!!! But I sure wouldn't trade my K3s and accessories for > that setup. > > 73 de Milt, N5IA, aka KN5FPO and K5FPO in those days. > > > -Original Message- From: Phil Hystad > Sent: Tuesday, June 24, 2014 10:05 AM > To: Raymond Bass > Cc

Re: [Elecraft] (no subject)

m: Phil Hystad Sent: Tuesday, June 24, 2014 10:05 AM To: Raymond Bass Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] (no subject) Raymond, You reminded me that I also have some old stuff with a slide switch -- I remember that my Eico 720 transmitter has a slide switch for VFO/Crystal usage. Bu

  1   2   3   4   5   6   >