2016-07-08 13:06 GMT-04:00 Jim Fehlig <jfeh...@suse.com>:
> On 07/08/2016 10:59 AM, Ciro Iriarte wrote:
>> Hi!, I just did a fresh install of Leap 42.1 + updates +
>> Virtualization repo, and trying to start the service I get a timeout
>> on the libvirtd.service depende
or Virtualbox in this specific
scenario at this point in time?, can I assume docker will place nice
with any of them?.
Regards,
--
Ciro Iriarte
http://iriarte.it
--
--
To unsubscribe, e-mail: opensuse-virtual+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-virtual+ow
(openSUSE Box Support English)
You must install GuestAdditions.
Regards,
--
Ciro Iriarte
http://cyruspy.wordpress.com
--
--
To unsubscribe, e-mail: opensuse-virtual+unsubscr...@opensuse.org
For additional commands, e-mail: opensuse-virtual+h...@opensuse.org
Hi, I was happy copying over my data to a new array of 4x500GB and it
just freezes after copying some data, is like the process is wainting
for a I/O operation to finish. There are no errors in the process or
/var/log/messages.
Controller: Nvidia onboard SATA controller
HDD: 4x500GB Samsung SATA2
2008/1/29, Ciro Iriarte [EMAIL PROTECTED]:
Hi, I was happy copying over my data to a new array of 4x500GB and it
just freezes after copying some data, is like the process is wainting
for a I/O operation to finish. There are no errors in the process or
/var/log/messages.
Controller: Nvidia
2008/1/28, Greg Freemyer [EMAIL PROTECTED]:
On Jan 28, 2008 6:41 PM, Ciro Iriarte [EMAIL PROTECTED] wrote:
Ok, I guess you know reads are not significantly impacted by the
tuning were talking about. This is mostly about tuning for raid5
write performance.
Anyway, are you planning
2008/1/28, Jose [EMAIL PROTECTED]:
I have a Hauppauge 250, working with mythdora 4.0, works okay, no
complains hardware wise, I had problems with the setup configuring the
TV out, I have read their usb models also work okay and there is
existing drivers for those:
Hauppauge WinTV
2008/1/28, Greg Freemyer [EMAIL PROTECTED]:
On Jan 28, 2008 11:25 AM, Ciro Iriarte [EMAIL PROTECTED] wrote:
Hi, anybody has some notes about tuning md raid5, lvn and xfs?. I'm
getting 20mb/s with dd and I think it can be improved. I'll add config
parameters as soon as i get home. I'm using
El 28/01/08, Jackintus [EMAIL PROTECTED] escribió:
Ciro Iriarte wrote:
Sobre las barreras, seria interesante tener un paquete para x86_64
de la version 7.68, y drivers para las memory card readers Ricoh que
traen los equipos Dell...
1) Para el tema de las memory card readers, revisa
Hi, anybody has some notes about tuning md raid5, lvn and xfs?. I'm
getting 20mb/s with dd and I think it can be improved. I'll add config
parameters as soon as i get home. I'm using md raid5 on a motherboard
with nvidia sata controller, 4x500gb samsung sata2 disks and lvm with
OpenSUSE [EMAIL
2008/1/28, Greg Freemyer [EMAIL PROTECTED]:
On Jan 28, 2008 3:51 PM, Ciro Iriarte [EMAIL PROTECTED] wrote:
2008/1/28, Greg Freemyer [EMAIL PROTECTED]:
On Jan 28, 2008 11:25 AM, Ciro Iriarte [EMAIL PROTECTED] wrote:
Hi, anybody has some notes about tuning md raid5, lvn and xfs?. I'm
2008/1/28, Greg Freemyer [EMAIL PROTECTED]:
On Jan 28, 2008 6:41 PM, Ciro Iriarte [EMAIL PROTECTED] wrote:
2008/1/28, Greg Freemyer [EMAIL PROTECTED]:
On Jan 28, 2008 3:51 PM, Ciro Iriarte [EMAIL PROTECTED] wrote:
2008/1/28, Greg Freemyer [EMAIL PROTECTED]:
On Jan 28, 2008 11
2007/8/9, Michal Marek [EMAIL PROTECTED]:
Ciro Iriarte wrote:
Probably i'll copy the datafiles (as soon as i get the needed space)
to a vmware installation and try to update mysql or probably reinstall
it (rpm -e mysql/rpm -i mysql-5.blah).
If you have the possibility to test your app
2008/1/20, Jonathan Ervine [EMAIL PROTECTED]:
On Saturday 19 January 2008 09:22:35 Ciro Iriarte wrote:
2008/1/17, Jonathan Ervine [EMAIL PROTECTED]:
On Wednesday 16 January 2008 19:49:07 Michal Marek wrote:
Kevin Thorpe wrote:
Does anyone know where I can get mysql version 5
Hi, wouldn't it be a nice idea to include a tool similar to the Time
Machine feature from OSX in Opensuse?, is there any project about
that?.
Home users would be really happy to recover a snapshot of a file they
deleted accidentaly. I know there's rsync (I use it myself), but i'm
talking about
2008/1/17, Jonathan Ervine [EMAIL PROTECTED]:
On Wednesday 16 January 2008 19:49:07 Michal Marek wrote:
Kevin Thorpe wrote:
Does anyone know where I can get mysql version 5 for SuSE 9.3?
There are 5.0 and 5.1 rpms for 10.0 in the buildservice:
2008/1/12, Johannes Nohl [EMAIL PROTECTED]:
Saying LTS I mean Long Term Support as ubuntu people do.
I know there's SEL but I'm asking for the open Suse. I'm configuring a
new webserver right now. And I'm seriosly thinking about waiting for
the next ubuntu LTS. I always ran the machines
Hi, once 10.2 was released I installed it on my laptop using ext3
instead of reiserfs to avoid support issues. Now comes the issue, my
home filesystem has 56GB of which i used 53GB, BUT the free space
states 41MB. So, where are the other 3GB?.
Already tried with a du -hs /home/ and i still get
2007/12/8, Andrei Verovski (aka MacGuru) [EMAIL PROTECTED]:
Hi !
There are a lot of junk files named like packages.en.gz.gz.gz.gz.gz.gz.gz in
Packman repository. Is it possible to get rid of them?
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL
2007/12/9, Anders Johansson [EMAIL PROTECTED]:
On Sunday 09 December 2007 13:41:34 Ciro Iriarte wrote:
Hi, once 10.2 was released I installed it on my laptop using ext3
instead of reiserfs to avoid support issues. Now comes the issue, my
home filesystem has 56GB of which i used 53GB
2007/12/9, Jan Ritzerfeld [EMAIL PROTECTED]:
Am Sonntag, 9. Dezember 2007 schrieb Ciro Iriarte:
Hi, once 10.2 was released I installed it on my laptop using ext3
instead of reiserfs to avoid support issues. Now comes the issue, my
home filesystem has 56GB of which i used 53GB
2007/12/9, Joe Sloan [EMAIL PROTECTED]:
Ciro Iriarte wrote:
Hi, once 10.2 was released I installed it on my laptop using ext3
instead of reiserfs to avoid support issues.
That's odd, I must have missed the part where suse said they won't
support reiserfs any more. I'm running all my 10.3
2007/11/23, jim barnes [EMAIL PROTECTED]:
On Wednesday 21 November 2007 10:35, Ciro Iriarte wrote:
Hi, looking at this topic found a Windows app
(http://www.techpowerup.com/spdtool/) that can query/modify this data
but can't find a way to query it on linux, hwinfo doesn't have that
info
2007/11/21, Ciro Iriarte [EMAIL PROTECTED]:
Hi, looking at this topic found a Windows app
(http://www.techpowerup.com/spdtool/) that can query/modify this data
but can't find a way to query it on linux, hwinfo doesn't have that
info and can't find anything alike on /proc.
Comments?
Ciro
Hi, looking at this topic found a Windows app
(http://www.techpowerup.com/spdtool/) that can query/modify this data
but can't find a way to query it on linux, hwinfo doesn't have that
info and can't find anything alike on /proc.
Comments?
Ciro
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For
2007/10/27, Rui Santos [EMAIL PROTECTED]:
Hi Ciro,
Try to think of a RAID Array as a single partition. You put a filesystem
on top of a partition or a RAID Array.
I know it's logically a partition/disk, but the important bit there is
logically, a real partition won't melt down or break into
2007/10/24, Jeff Mahoney [EMAIL PROTECTED]:
Ok, I just subscribed to this list, so this is the first message I have
in my inbox on this topic. I've read the rest on the archive. I do
regularly read opensuse-kernel, though.
First to start with the questions from the bottom up:
ReiserFS
2007/10/26, Per Jessen [EMAIL PROTECTED]:
Ciro Iriarte wrote:
Now i would like to add 4 500GB disks in a secondary array with raid5
but i'm afraid i would lose the array if there's any outage (have to
mention a UPS in my letter to Santa)
Anybody knows if the raid5 (md) would
2007/10/26, Greg Freemyer [EMAIL PROTECTED]:
On 10/25/07, Ciro Iriarte [EMAIL PROTECTED] wrote:
Anybody has experience with linux Raid5 and power outages?, i
currently have two 250GB disks in a RAID1 array in my main
workstation. When there's any power outage the array is rebuilt
2007/10/26, Carlos E. R. [EMAIL PROTECTED]:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Friday 2007-10-26 at 00:16 -0300, Ciro Iriarte wrote:
Anybody has experience with linux Raid5 and power outages?, i
currently have two 250GB disks in a RAID1 array in my main
workstation. When
2007/10/26, Carlos E. R. [EMAIL PROTECTED]:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Friday 2007-10-26 at 14:20 -0300, Ciro Iriarte wrote:
Read only messages:
-
[EMAIL PROTECTED]:~ echo dosaokdsa hbla
bash: hbla: Sistema de ficheros de sólo lectura
Anybody has experience with linux Raid5 and power outages?, i
currently have two 250GB disks in a RAID1 array in my main
workstation. When there's any power outage the array is rebuilt but
given it's a mirror it's not a major issue.
Now i would like to add 4 500GB disks in a secondary array with
Hi, just found a weird behavior on 10.3 (didn't happen on 10.1), when
i have little space it directly tells me that there's no space
left i'm using reiserfs on those fs...
mainwks:~/download df -h /home/ /srv/ftp/
S.ficheros Tamaño Usado Disp Uso% Montado en
/dev/mapper/system-home
2007/10/24, Aaron Kulkis [EMAIL PROTECTED]:
Rikard Johnels wrote:
On Wednesday 24 October 2007 15:48, Ciro Iriarte wrote:
Hi, just found a weird behavior on 10.3 (didn't happen on 10.1), when
i have little space it directly tells me that there's no space
left i'm using reiserfs
Hi,
I'm looking for a memoery card reader (capable of reading xD) with IDE
interface, the idea is that it takes the place that usually uses a
floppy drive and that works with linux. I don't have currently free
usb ports.
Anybody seen this weird specimen?
Regards,
Ciro
--
To unsubscribe,
2007/10/10, Ciro Iriarte [EMAIL PROTECTED]:
Hi,
Just installed [EMAIL PROTECTED] (changing from [EMAIL PROTECTED]),
found some
issues and would like to comment them to see if someone else did it
too.
* VMware Server
Got this error trying to run the vmware-server-console
2007/10/11, Dave Howorth [EMAIL PROTECTED]:
Has anybody installed 10.2 or 10.3 on one of these beasts?
We have 10.2 on one and it mostly seems to run. But sometimes it hangs
whilst booting, not in any one particular place. Vista works fine.
fdisk and parted don't understand the disk
Hi,
Just installed [EMAIL PROTECTED] (changing from [EMAIL PROTECTED]),
found some
issues and would like to comment them to see if someone else did it
too.
* VMware Server
Got this error trying to run the vmware-server-console:
mainwks:~ vmware-server-console
Hi,
Just downloaded the x86_64 iso for 10.2 GM, the checksum matches the
iso image but if i burn it and do a md5sum /dev/sr0 i get a
different checksum. Tried also the media test option within the
installation and it returns Aceptar in a bad spanish (wrong word at
least) but i assume it means it
2007/10/8, Ciro Iriarte [EMAIL PROTECTED]:
Hi,
Just downloaded the x86_64 iso for 10.2 GM, the checksum matches the
iso image but if i burn it and do a md5sum /dev/sr0 i get a
different checksum. Tried also the media test option within the
installation and it returns Aceptar in a bad spanish
2007/10/8, Carlos F Lange [EMAIL PROTECTED]:
On Mon October 8 2007 06:38, Ciro Iriarte wrote:
Hi,
Just downloaded the x86_64 iso for 10.2 GM, the checksum matches the
iso image but if i burn it and do a md5sum /dev/sr0 i get a
different checksum. Tried also the media test option within
2007/9/30, Clayton [EMAIL PROTECTED]:
In my passed life I owned a business where I used filepro+ or profile+
It was highly customizable. I am looking for a current Office Ledger
(double entry) software package for Linux. Does anyone know of one that
interfaces with sql light, mysql or
Hi,
Just added two Dell utilities to the buildservice, is there anyone
interested in testing them?, they are biosdisk and libsmbios.
Regards,
Ciro
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Hi,
Slightly off topic, but is there anyone that found a way to send a
picture in a MMS using a cell phone / grps modem?. Gammu seems to have
the option to do it, but every picture format i try is reported as
unsupported
Regards,
Ciro
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For
2007/9/2, Ciro Iriarte [EMAIL PROTECTED]:
2007/8/30, Ciro Iriarte [EMAIL PROTECTED]:
2007/8/30, Felix Miata [EMAIL PROTECTED]:
On 2007/08/30 20:09 (GMT-0400) Ciro Iriarte apparently typed:
Hi, replaced the i810 driver with intel looking for better results
on getting the s-video
2007/9/10, David C. Rankin [EMAIL PROTECTED]:
Kai Ponte wrote:
For anyone interested, there's a new version of Tux Math. I went through the
pain of compiling it and created an RPM file.
A screenshot is here:
http://www.perfectreign.com/stuff/2007/20070909_tuxmath_keypad.jpg
The RPM
2007/9/9, Kai Ponte [EMAIL PROTECTED]:
On Saturday 08 September 2007 22:23, Michael S. Dunsavage wrote:
Has anyone set up internet printing with suse? Or know of any information
out there? I tried google but really didn't get any where.
What exactly do you mean by internet printing?
--
2007/9/7, Bob S [EMAIL PROTECTED]:
On Friday 07 September 2007 09:40, Patrick Shanahan wrote:
* Carlos E. R. [EMAIL PROTECTED] [09-07-07 08:55]:
The Friday 2007-09-07 at 08:45 -0400, Ciro Iriarte wrote:
You'll have to go with an eSATA enclosure
My MB doesn't have sata
2007/9/8, primm [EMAIL PROTECTED]:
Hi everyone.
What does a cluster of computers do that an AMD 64 can't?
Cheers and have a great weekend from Lynn.
I'm not sure if you got the concepts right... You can build a cluster
with AMD64 machines It's generally used to achieve high
availability
2007/9/8, Patrick Shanahan [EMAIL PROTECTED]:
* Ciro Iriarte [EMAIL PROTECTED] [09-08-07 04:07]:
Just checked, on [EMAIL PROTECTED] works out of the box, on [EMAIL
PROTECTED] -d
ata is needed.
smartmontools-5.33-18
openSUSE 10.1 x86_64
2 x Seagate SATA2 400GB
08:04 wahoo:~ # smartctl
2007/9/8, Scott Newton [EMAIL PROTECTED]:
I have openSUSE 10.2 (with all the latest updates) installed on a machine that
has an ASUS M2N-MX SE motherboard. Quite regularly the machine will lock up,
independent of whether it is running in a tty or in X (ie locks up even when
X is not running).
2007/9/8, primm [EMAIL PROTECTED]:
On Saturday 08 September 2007 21:15, Alexey Eremenko wrote:
hi susers !
I have installed compiz-fusion, with ccsm I have configured ring
switcher, but when I press WinKey+F12 nothing happens ! Why ?
Normal compiz works via XGL, but compiz-fusion
2007/9/8, Scott Newton [EMAIL PROTECTED]:
On Sunday, 09 September 2007 05:07:15 Ciro Iriarte wrote:
Any messages on the logs around the time it locks up?, i'm running
[EMAIL PROTECTED] on a M2N32-SLI without issues. Make sure it's not heating
up and that your RAM sticks are not damaged
2007/9/8, Ciro Iriarte [EMAIL PROTECTED]:
2007/9/8, Scott Newton [EMAIL PROTECTED]:
On Sunday, 09 September 2007 05:07:15 Ciro Iriarte wrote:
Any messages on the logs around the time it locks up?, i'm running
[EMAIL PROTECTED] on a M2N32-SLI without issues. Make sure it's not
heating
2007/9/7, Carlos E. R. [EMAIL PROTECTED]:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Wednesday 2007-09-05 at 20:31 -0400, Jorge Fábregas wrote:
Thank you guys for your comments/suggestions. I really appreciate it. I
think
I'll be considering one of these USB IDE disk caddies.
2007/9/7, Carlos E. R. [EMAIL PROTECTED]:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Friday 2007-09-07 at 09:40 -0400, Patrick Shanahan wrote:
MoxNix, smartd doesn't appear to work on my sata drives .. :^(
Yes, I heard that smart support is not complete yet in linux...
- --
Hi, anybody having problem with aMule?, i'm running aMule-2.1.3-1.pm.1
on a Core 2 Duo laptop with [EMAIL PROTECTED] Come from the office this
morning and found my laptop almost unresponsive. I could hardly login
from my desktop with ssh and found amule eating 1.5GB of RAM and all
my swap. Killing
2007/8/30, Ciro Iriarte [EMAIL PROTECTED]:
2007/8/30, Felix Miata [EMAIL PROTECTED]:
On 2007/08/30 20:09 (GMT-0400) Ciro Iriarte apparently typed:
Hi, replaced the i810 driver with intel looking for better results
on getting the s-video output to work but the server is using a wrong
2007/8/29, Ciro Iriarte [EMAIL PROTECTED]:
2007/8/29, Ciro Iriarte [EMAIL PROTECTED]:
Hi, trying to update a [EMAIL PROTECTED] system with the latest KDE3
packages from build service i get a lot of conflicts between kdelibs3
and kdelibs3-32bit. Shouldn't this libraries go to a different
2007/8/30, Francisco José Cadaval Arrola [EMAIL PROTECTED]:
Hi all!
I have installed latest version of ATI drivers on 10.2.
Installation was ok and CCC (Catalyst Control Center) appeared on
applications list.
I tried to run it but a reboot was needed after drivers installation
before be
Hi, trying to update a [EMAIL PROTECTED] system with the latest KDE3
packages from build service i get a lot of conflicts between kdelibs3
and kdelibs3-32bit. Shouldn't this libraries go to a different
directory?
Example:
error: file /opt/kde3/lib/libkspell.so.4.2.0 from install of
2007/8/29, Ciro Iriarte [EMAIL PROTECTED]:
Hi, trying to update a [EMAIL PROTECTED] system with the latest KDE3
packages from build service i get a lot of conflicts between kdelibs3
and kdelibs3-32bit. Shouldn't this libraries go to a different
directory?
Example:
error: file /opt/kde3/lib
Hi, there's a thread on opensuse-buildservice about having support for
oracle on php, perl, and other apps like tora, plus adding a quick
solution for end users to build oracle-instantclient packages.
Although Opensuse can't provide a binary package for
oracle-instantclient because of legal
2007/8/14, Rajko M. [EMAIL PROTECTED]:
On Monday 13 August 2007 05:38, Ciro Iriarte wrote:
Anyone knows if the BuildService subscription circuit still works?, i
asked for an account weeks ago and i'm still getting Errorcode:
unconfirmed_user.
Hi Ciro,
I would ask the same in opensuse
Anyone knows if the BuildService subscription circuit still works?, i
asked for an account weeks ago and i'm still getting Errorcode:
unconfirmed_user.
Ciro
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
2007/8/11, Ken Jennings [EMAIL PROTECTED]:
On Saturday 2007-08-11 02:36, Marcus Meissner wrote:
On Sat, Aug 11, 2007 at 01:26:04AM -0400, Ken Jennings wrote:
openSuse 10.2
2.6.18.8-0.5-default #1 SMP Fri Jun 22 12:17:53 UTC 2007 x86_64
GNU/Linux
Is compress/uncompress really not
2007/8/10, Michal Marek [EMAIL PROTECTED]:
Ciro Iriarte wrote:
2007/8/9, Michal Marek [EMAIL PROTECTED]:
Ciro Iriarte wrote:
Probably i'll copy the datafiles (as soon as i get the needed space)
to a vmware installation and try to update mysql or probably reinstall
it (rpm -e mysql/rpm
2007/8/7, Michal Marek [EMAIL PROTECTED]:
Thanks, i've already seen this (exactly
http://dev.mysql.com/doc/refman/5.0/en/upgrading-from-4-1.html), but i
was willing to hear experiences from someone that actually did the
upgrade.
I would be interested as well. But I'm affraid the
2007/8/9, Xn Nooby [EMAIL PROTECTED]:
When I try to conenct to my SLES9 boxes with the latest TightVNC
program, all I I get is a Status: Protocol version negotiated
message. Googling it appears the VNC server in SLES9 does not support
the new protocol used in TightVNC 1.3.9, and the solution
2007/8/9, Michal Marek [EMAIL PROTECTED]:
Ciro Iriarte wrote:
Probably i'll copy the datafiles (as soon as i get the needed space)
to a vmware installation and try to update mysql or probably reinstall
it (rpm -e mysql/rpm -i mysql-5.blah).
If you have the possibility to test your app
Anybody tried it?, is it actually being used on the Opensuse project?.
Looks interesting Maybe it can replace workflow apps on
Domino/Notes...
Webpage: http://swamp.sourceforge.net/
SWAMP - The Workflow Platform
SWAMP is a workflow processing platform. Workflows are processes with
many
2007/8/5, Ciro Iriarte [EMAIL PROTECTED]:
2007/8/5, Leo Eraly [EMAIL PROTECTED]:
On Sat, 2007-08-04 at 08:06 -0400, Ciro Iriarte wrote:
Hi, anybody update an stock MySQL4 from SLES9 with a live database to
MySQL5 from Build Service
(http://download.opensuse.org/repositories/server
2007/8/6, Juergen Weigert [EMAIL PROTECTED]:
On Aug 06, 07 18:15:29 +0200, Thomas Schmidt wrote:
Ciro Iriarte wrote:
Anybody tried it?, is it actually being used on the Opensuse project?.
Looks interesting Maybe it can replace workflow apps on
Domino/Notes...
Definitly
2007/8/5, Leo Eraly [EMAIL PROTECTED]:
On Sat, 2007-08-04 at 08:06 -0400, Ciro Iriarte wrote:
Hi, anybody update an stock MySQL4 from SLES9 with a live database to
MySQL5 from Build Service
(http://download.opensuse.org/repositories/server:/database/SLES_9/x86_64/)
Best thing to do
Hi, anybody update an stock MySQL4 from SLES9 with a live database to
MySQL5 from Build Service
(http://download.opensuse.org/repositories/server:/database/SLES_9/x86_64/)
Ciro
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
2007/8/3, [EMAIL PROTECTED] [EMAIL PROTECTED]:
On Fri, 2007-08-03 at 05:37 -0400, Ciro Iriarte wrote:
2007/8/3, [EMAIL PROTECTED] [EMAIL PROTECTED]:
You have a point there. I have done some reading about the Intel
versions of their CPU's. If all is true what is written
2007/8/3, [EMAIL PROTECTED] [EMAIL PROTECTED]:
You have a point there. I have done some reading about the Intel
versions of their CPU's. If all is true what is written in the
WikiPedia, that only the Intel Core 2 brand refers to CPUs with the
64-bit Core microarchitecture. All else is 32 Bit.
2007/8/3, Jeff Bachtel [EMAIL PROTECTED]:
The Factory version of the ocfs2 package I just downloaded still
contains buggy 1.2.2 code. I suspect that the repository used for SLES
10 SP1 has a newer version, as the network timeout knobs were added,
but I'm really not intentionally installing
2007/8/1, Ciro Iriarte [EMAIL PROTECTED]:
Hi, I'm running Opensuse 10.2 on a Dell Inspiron 6400, just some notes:
- Intel 945GM Graphic Card: Works fine, but couldn't make the S-Video
output work.
- Ricoh Memory Card reader: It's detected but didn't use it yet.
- Intel Corporation PRO
2007/8/1, [EMAIL PROTECTED] [EMAIL PROTECTED]:
Hi all,
which DELL Notebooks work 100% with OpenSUSE 10.2? I know DELL has some
it even delivers without OS (eg. Latitude D830 at the same price with or
without OS), but they are of the upper price range. I need a notebook
below 1000$ (about 750
2007/7/30, Matthew Stringer [EMAIL PROTECTED]:
Hi,
I'm wanting to build myself a new desktop PC for home shortly as my current
one is getting long in the tooth (Athlon +XP 2600!)
It should be fine, try upgradding RAM (1GB at least)
I was wondering if anyone knows of a hardware review site
2007/7/30, Ciro Iriarte [EMAIL PROTECTED]:
2007/7/30, Matthew Stringer [EMAIL PROTECTED]:
Hi,
I'm wanting to build myself a new desktop PC for home shortly as my current
one is getting long in the tooth (Athlon +XP 2600!)
It should be fine, try upgradding RAM (1GB at least)
I
2007/7/30, Chris Arnold [EMAIL PROTECTED]:
OK, i have partitioned the array and have formatted the physical drive. I
used these commands:
fdsik /dev/sdb
-n
-p
-w
Then to formatt i used:
mkfs.reiserfs -f /dev/sdb
Now to copy over the existing /opt folders and files, i am trying to use:
2007/7/25, Robert Smits [EMAIL PROTECTED]:
On July 25, 2007 01:38:27 pm ianseeks wrote:
On Wednesday 25 Jul 2007, Robert Smits wrote:
Some years ago I used my home gardening program, Key Home Gardener, which
was a 16 bit Windows program, to lay out my lot, my septic system, and my
The Tuesday 2007-07-17 at 12:55 -0400, Ciro Iriarte wrote:
Sorry, i don't see it as part of another thread from GMail.
Then change your mail client. The gmail webmail is broken in this respect
(and others).
- --
Cheers,
Carlos E. R.
I won't, but thanks for the recommendation.
Ciro
2007/7/17, Carlos F Lange [EMAIL PROTECTED]:
On Tue July 17 2007 05:32, Rui Pedro Mendes Salgueiro wrote:
Hello.
Hi, Rui.
I can't help you with your problem, but I know that your chances of
getting help are bigger if you do not use the reply button to start a
new message to the mailing-list.
2007/7/17, Patrick Shanahan [EMAIL PROTECTED]:
* Ciro Iriarte [EMAIL PROTECTED] [07-17-07 12:26]:
[...]
Ciro
PLEASE, do *not* reply to *hi-jacked* threads.
Replying to *hi-jacked* threads further deteriorates the quality of
the archives and makes searching a specific topic a mess
2007/7/17, Rui Pedro Mendes Salgueiro [EMAIL PROTECTED]:
Sorry for the other message. I meant to erase the In-Reply-To header,
I thought I had done it, but I forgot :( Trying again:
Hello.
In our network we have the user $HOMEs mounted via NFS. This has been working
ok for many years (the
Thanks for this. It has been added into my list of bookmarks, however
the question still partly remains ie why I hardly ever see anything
written about openSUSE?
Hylton
All those sites are community driven, so, if Opensuse users don't take
the time to write this kind of procedures down, nobody
2007/7/10, Rajko M. [EMAIL PROTECTED]:
Anybody else having a problem with last kernel update?
https://bugzilla.novell.com/show_bug.cgi?id=290959
--
Regards,
Rajko.
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Yes, after that update,
Actually the later kernels have this restored already.
And I can attest that it works.
Just update to the latest kernel.
Does this apply to Suse 10.1 as well?
Ciro
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
2007/7/6, Kai Ponte [EMAIL PROTECTED]:
I'm curious - any idea as to when kernel version 2.6.20 might be
released to us SUSE folk?
I want to use it to gain a feature on my laptop (integrated media
reader) that .18 won't support.
I don't particularly feel comfortable rolling my own kernel.
--
k
2007/7/2, Zhang Weiwu [EMAIL PROTECTED]:
在 2007-07-02一的 10:33 -0700,Sloan写道:
Zhang Weiwu wrote:
Dear all
Can you suggest something I can try? Or at least let me know a good
solution is simply missing.
Have you tried filezilla?
thank you very much for providing suggestion and
2007/6/24, Nat Friedman [EMAIL PROTECTED]:
Hi everyone,
At Novell we've been planning a special internal event that will run
this week, from June 25th to 29th. We're calling it Hack Week.
During Hack Week, our entire Linux engineering team -- hundreds of
people -- will be working on whatever
2007/6/23, Ciro Iriarte [EMAIL PROTECTED]:
2007/6/23, James Knott [EMAIL PROTECTED]:
Ciro Iriarte wrote:
I, just updated last night my system running Opensuse 10.2 (x86_64),
i'm not sure when really this started, but now i can't access a WinXP
share or connect through sftp to my Suse 10.1
I, just updated last night my system running Opensuse 10.2 (x86_64),
i'm not sure when really this started, but now i can't access a WinXP
share or connect through sftp to my Suse 10.1 workstation with
konqueror, in both cases it says the password is wrong, although i can
login to the XP machine
2007/6/23, Ciro Iriarte [EMAIL PROTECTED]:
I, just updated last night my system running Opensuse 10.2 (x86_64),
i'm not sure when really this started, but now i can't access a WinXP
share or connect through sftp to my Suse 10.1 workstation with
konqueror, in both cases it says the password
2007/6/23, James Knott [EMAIL PROTECTED]:
Ciro Iriarte wrote:
I, just updated last night my system running Opensuse 10.2 (x86_64),
i'm not sure when really this started, but now i can't access a WinXP
share or connect through sftp to my Suse 10.1 workstation with
konqueror, in both cases
2007/6/15, Pascal Bleser [EMAIL PROTECTED]:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alexey Eremenko wrote:
Alternatively, you can write some custom scripts to share hard disk
data between nodes, use webmin to manage nodes together, and use
Cisco's NAT with Load Balancing to use both
Well, i really don't know what to thing, this laptop has exclusively
linux (opensuse 10.2) and using firefox from home i get (too) often
redirected to www.city.ws/notfound.asp while trying to access any page
(google.com, local forums, etc), it's intermitent. Initially i blamed
my Linksys WRT54GX4
1 - 100 of 160 matches
Mail list logo