Frame 7.2 and Vista
Framers, I have just received a new PC - it's running Windows Vista. I installed Frame 7.2 (build 144) successfully but found I was unable to install the patch to update it to build 158. I know Frame 7.2 is not officially supported on Vista but I am not currently in a position to upgrade to Frame 8. Does anybody have any experience with running this combination? I would be particulary interested in finding out how stable Frame 7.2 is on Vista and whether there is any way I can install the 158 patch. Thanks, Phil Heron Technical Writer - CODA www.coda.com Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
Frame 7.2 and Vista
Hooray - it worked! Thankyou very much for the hint, Denise. Phil Heron -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Denise L. Moss-Fritch Sent: 12 September 2007 16:03 To: Phil Heron; 'framers' Subject: RE: Frame 7.2 and Vista Phil, I have not tried the following with the FM 7.2 patches, however the following did work with another application. Right-click on the patch file and select Properties.
and yet another dumb question
Try the FrameMaker Developer Center at: http://www.adobe.com/devnet/framemaker/ There's a link on that page to the documentation - "Developer Resources - Manuals". Phil Heron -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Gail Former Sent: 18 September 2007 18:43 To: framers at lists.frameusers.com Subject: and yet another dumb question Hi All I have just had the trial version of FM 8 added to my applications, and wonder where the Structured Application Developer's Guide went. Is it no longer available? Not furnished with the trial version? Somewhere else? If someone could point me to it, I would be grateful. Thanks Gail, confused in Indiana ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
and yet another dumb question
That's strange - I'm sure that last time I looked at that page it was the V8 manual. Phil Heron -Original Message- From: Gail Former [mailto:gail.for...@accenttech.com] Sent: 19 September 2007 13:03 To: Phil Heron Cc: framers Subject: Re: and yet another dumb question Thanks for the link, but that one is titled for version 7.1, which I already have. Gail Phil Heron wrote: > Try the FrameMaker Developer Center at: > http://www.adobe.com/devnet/framemaker/ > > There's a link on that page to the documentation - "Developer > Resources > - Manuals". > > Phil Heron > Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
and yet another dumb question
Aha - I've found it: http://www.adobe.com/support/documentation/en/framemaker/ There are two structure manuals for V8 - a Developer's Guide and a Developer's Reference. Phil Heron -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Phil Heron Sent: 19 September 2007 14:14 To: framers Subject: RE: and yet another dumb question That's strange - I'm sure that last time I looked at that page it was the V8 manual. Phil Heron -Original Message- From: Gail Former [mailto:gail.for...@accenttech.com] Sent: 19 September 2007 13:03 To: Phil Heron Cc: framers Subject: Re: and yet another dumb question Thanks for the link, but that one is titled for version 7.1, which I already have. Gail Phil Heron wrote: > Try the FrameMaker Developer Center at: > http://www.adobe.com/devnet/framemaker/ > > There's a link on that page to the documentation - "Developer > Resources > - Manuals". > > Phil Heron > Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Japanese FrameMaker
Paul, I have not seen V8 but the previous Windows versions do include the language versions you mention. However, the serial number provided when you buy the package only allows you to install the language purchased. If you want to install the Japanese version you will need a Japanese specific serial number. I would expect you could buy this from any territory. Note that if you only need access to the Japanese-specific features, not the Japanese UI, you can obtain these from the standard English language version. To do this on Windows XP, change the system setting "Language for non-Unicode programs" to Japanese. Ha - I've just realised that Frame 8 is, unlike previous versions, a Unicode application. In this case, take a look at the Asian Language Features Information on the FrameMaker Preferences dialog to see which Japanese features are available. Phil Heron -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Paul Findon Sent: 23 April 2008 16:16 To: Framers Subject: Japanese FrameMaker Framers, Mac FrameMaker 6 and 7 CDs contain a single installation file and when launched you get to choose English, German, French, or Japanese. Can anyone tell me if this is the same for Windows FrameMaker 8.0? I need the Japanese version ASAP. Tried the Adobe Japan online store, but it won't let me buy (non-Japan IP, I guess). Paul ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
party invitation
Deirdre, Have you explored the Frame Template Packs? Template Pack 2 contains some "Fun Stuff" templates, including some for foldable cards. Although designed for Frame 5.5, they can be used just as well with more up-to-date versions of FrameMaker. You can get the template packs from: http://www.adobe.com/products/framemaker/tempseries/ Phil Heron -Original Message- From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Deirdre Reagan Sent: 02 December 2008 17:20 To: Framer's List Subject: party invitation Hi all: FM 8.0 -- Windows XP. I am making our holiday party invitations -- is FM a good product to use, or would word be better. I don't have any good publishing software. Unless FM is good publishing software, of course! LOL Deirdre ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
Frame 7.2 and Vista
Hi Edwin, I do have Frame 7.2 installed under Vista but I haven't been using it intensively on this platform - my primary working environment is still XP. There was no problem with the standard installation of Frame, but I didn't install the included Acrobat Distiller as I already have Acrobat 8 Pro. As I mentioned in my message to the Framers list, I was at first unable to install the build 158 patch, but after trying the following suggestion from Denise L. Moss-Fritch I was able to apply the update: --- Right-click on the patch file and select Properties. >From the Compatibility tab of the Properties dialog, select "Run this program in the compatibility mode for" check box and select Windows XP (Service Patch 2). Click OK. --- I haven't noticed any problems with Frame 7.2 on Vista but, as I mentioned, I haven't been using it intensively. Incidentally, I recently had to edit some old Frame 5.5 documents and I was surpised to find that Frame 5.5.6 installed and worked unexpectedly smoothly under Vista. If I had had the choice, I would have chosen XP for my new PC. I find some features of Vista extremely awkward, in particular the new version of Windows Explorer. Hope this helps, Phil Heron From: ETudsbery at cpaglobal.com [mailto:etudsb...@cpaglobal.com] Sent: 28 February 2008 16:07 To: Phil Heron Subject: Re: Frame 7.2 and Vista Hi Phil, I'm interested in your experience with Frame 7.2 and Vista. I was thinking about getting Vista, and wanted to know if Frame 7.2 works OK on it. Many thanks for any information. Edwin Tudsbery Inactive hide details for "Phil Heron" "Phil Heron" "Phil Heron" Sent by: framers-bounces+etudsbery=cpaglobal.com at lists.frameusers.com 12/09/2007 16:39 To "framers" cc Subject Frame 7.2 and Vista Framers, I have just received a new PC - it's running Windows Vista. I installed Frame 7.2 (build 144) successfully but found I was unable to install the patch to update it to build 158. I know Frame 7.2 is not officially supported on Vista but I am not currently in a position to upgrade to Frame 8. Does anybody have any experience with running this combination? I would be particulary interested in finding out how stable Frame 7.2 is on Vista and whether there is any way I can install the 158 patch. Thanks, Phil Heron Technical Writer - CODA www.coda.com Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as etudsbery at cpaglobal.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/etudsbery%40cpagloba l.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It is intended solely for the addressee; access to this email by anyone else is unauthorised. If you are not the intended recipient: (1) you are kindly requested to return a copy of this message to the sender indicating that you have received it in error, and to destroy the received copy; and (2) any disclosure or distribution of this message, as well as any action taken or omitted to be taken in reliance on its content, is prohibited and may be unlawful.
How to include font size indicator on formatting toolbar
Which version of FrameMaker are you using? Several new icons were added to the formatting toolbar for V7.2, including the one for font size. If you have a previous version of FrameMaker chances are you won't have the new icon. Phil Heron Technical Writer - CODA -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Duncan, Gary Sent: 06 June 2008 14:55 To: Bodvar Bjorgvinsson Cc: framers at lists.frameusers.com Subject: RE: How to include font size indicator on formatting toolbar No, I mean how do you include the font size indicator in the formatting bar. My colleague has everything up to the paragraph tag indicator. My tool bar shows the font size directly to the right of that field. I couldn't find a way to customize the tool bar to include that. -Original Message- From: Bodvar Bjorgvinsson [mailto:bod...@gmail.com] Sent: Friday, June 06, 2008 8:08 AM To: Duncan, Gary Cc: framers at lists.frameusers.com Subject: Re: How to include font size indicator on formatting toolbar You mean: View > Formatting Bar ? Bodvar On Thu, Jun 5, 2008 at 7:52 PM, Duncan, Gary wrote: > Hi everyone, > > > > A colleague wants to know how to get the font size indicator to show on > the Frame formatting toolbar. This shows on my tool bar but I cannot > remember how I got it to show. > > > > Does anyone know how to make this show on the toolbar? > > > > Thank you... > > > > Gary > > ___ > > > You are currently subscribed to Framers as bodvar at gmail.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit http://lists.frameusers.com/mailman/options/framers/bodvar%40gmail.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > -- "It is impossible to make anything foolproof because fools are so ingenious." -- Edsel Murphy, dec. ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
Extracting copied-in graphics from documents
Hi Geoffrey, I'm not an expert on graphics but I've had success in the past using the "Save as HTML" function in both Frame and Word. Taking this option saves each image as a graphic file. In Frame, you can choose between GIF, JPEG and PNG as the graphic format. Specify which one to use on the HTML Options dialog (Utilities > HTML Setup - Options button). I'm not sure what format Word uses or whether you have a choice of formats. Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Geoffrey Marnell Sent: 02 May 2008 01:02 To: framers at lists.frameusers.com Subject: Extracting copied-in graphics from documents Hi Framers, A posting some weeks ago mentioned a utility that could extract graphics copied into FM files and restore them in their original format. I should have been paying more attention at the time, but can someone remind me what that utility is called? (I'm hoping it can do a better job than Acrobat.) BTW: does anyone know of a similar utility that can pull graphics out of MS Word documents? Cheers Geoffrey Marnell Principal Consultant Abelard Consulting Pty Ltd T: (+61 3) 9596 3456 F: (+61 3) 9596 3625 W: http://www.abelard.com.au <http://www.abelard.com.au/> ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
"An error occurred while printing."
Nina, Does the folder name have a punctuation character in it by any chance? There's an ancient known problem with FrameMaker in that it can't print to a folder with a punctuation character. Phil Heron -Original Message- From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Nina Rogers Sent: 27 October 2008 18:17 To: framers at lists.frameusers.com Subject: "An error occurred while printing." I am in Framemaker 7.2 and am trying to print to PDF. Generally I have no problem doing this, but today I am getting the message "An error occurred while printing." I haven't changed any settings since the last time I printed to PDF (either last Friday or Saturday), so I'm stumped as to what might be causing the error. I know this is a very general question, but I've already tried closing and opening Framemaker, restarting the computer, etc. Any ideas? Thanks! Nina Rogers, Technical Writer Tax Development (Federal) Drake Software (828) 524-8020 x4204 nina.rogers at drakesoftware.com This email (including any attachments) contains PRIVILEGED AND CONFIDENTIAL INFORMATION protected by federal and/or state law and is intended only for the use of the individual(s) or entity(ies) designated as recipient(s). The information contained within this email should not be construed as tax advice. If you are not an intended recipient of the email, you are hereby notified that any disclosure, copying, distribution, or action taken in reliance on the contents of this email is strictly prohibited. Disclosure to anyone other than the intended recipient does not constitute a waiver of any applicable privilege. If you have received this email in error, please immediately notify us by phone at (828) 524-2922 or by email at Security at Dnet.net <mailto:Security at Dnet.net> and then permanently delete the original and any copy of this email (including any attachments) and destroy any printout thereof. ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
How to prevent Framemaker changing the Link
Michael, If I remember correctly, typing a string such as \d in a Frame dialog box is a way of typing a special character, in this case the dagger character. I believe the way to put the directory separator in is to use the unix-style /, ie a forward slash like this: message openfile "W:/Schadstoffliteratur/Dioxine/Attempt to establish benchmarks for Dioxins.pdf" Hope this helps, Phil Heron Technical Writer - CODA -Original Message- From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Michael B?hme Sent: 23 September 2008 11:59 To: framers at lists.frameusers.com Subject: How to prevent Framemaker changing the Link Hallo, I have a Problem which has hopefully an easy solution. I try to make Hyperlinks to open an other PDF on my harddisk. I write: message openfile "W:\Schadstoffliteratur\Dioxine\Attempt to establish benchmarks for Dioxins.pdf" Than Framemaker convert this to: message openfile "W:\Schadstoffliteratur?ioxine\Attempt to establish benchmarks for Dioxins.pdf" Looking in the MIF I see the following: The resulting Link does not work, of course. When I repair the link in the MIF manually, open it in FM, print to PDF, it works fine: But I may not touch the Link in Framemaker again. I want to make hundreds of similar Links, so I am looking for a solution. How to prevent Framemaker changing the Link? Michael FM 8.0p277 ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
Frame Maker 9 and some questions about its indexing and pagelimits
Someone took my keyboard once while I was at lunch. When I tracked it down the offender's explanation was "It didn't look like anyone was using it". Phil Heron -Original Message- From: framers-bounces at lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of davec2...@aim.com Sent: 04 August 2009 23:48 To: framers at lists.frameusers.com Subject: Re: Frame Maker 9 and some questions about its indexing and page limits And if Martians abducted me I'd not be able to finish the document... I've never heard of anyone "borrowing" a monitor that was on and connected to someone's computer. As well, it seems a reach... Dave From: barry.kief...@jeppesen.com The real problem with this is if you move all of your boxes and pods to the second monitor, and someone "borrows" your second monitor when you are in the rest room, when you get back you no longer have any FrameMaker 9 controls. > Finally, does anyone with FM use two screens? I am unhappy with all these > boxes and pods in FM9 and would like them all on a second screen (which I > would have to buy). I have not learnt how to dock them yet. Any hints > gratefully received. > > Rob Shell ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd, CODA 2go Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA 2go Ltd: Registered in England 2534602 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
Easiest way to create a new book from a template (unstructuredFM8)
Peter, Try the Frame Template Packs. Although designed for Frame 5.5, they can be used just as well with more up-to-date versions of FrameMaker. You can get the template packs from: http://www.adobe.com/products/framemaker/tempseries/ Phil Heron -Original Message- From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Peter Courlis Sent: 12 January 2009 12:29 To: framers at lists.frameusers.com; Andersen, Verner Engell VEA; dspreadb at yahoo.com Subject: Re: Easiest way to create a new book from a template (unstructured FM8) Good Morning, Does anyone know of a source of Book templates (free) that a newbie might have access to, for study? TIA -peter --- On Mon, 1/12/09, David Spreadbury wrote: > From: David Spreadbury > Subject: Re: Easiest way to create a new book from a template (unstructured > FM8) > To: framers at lists.frameusers.com, "Andersen, Verner Engell VEA" > > Date: Monday, January 12, 2009, 6:49 AM > Verner, > You should be able to do a File > Save Book As, renaming > the book file. This should rename your generated files to > match the book filename. > > --- On Mon, 1/12/09, Andersen, Verner Engell VEA > wrote: > > From: Andersen, Verner Engell VEA > > Subject: Easiest way to create a new book from a template > (unstructured FM8) > To: framers at lists.frameusers.com > Date: Monday, January 12, 2009, 2:42 AM > > My FM template contains all formats in the book. When I > create a new > book I take a chapter file at set it all up from there: > > Add front page, toc, chapters, glossary index and rear > page. All set up > by using specific headings to call the correct master > pages. I set up > the page and chapter numbering from the book and set up the > Table of > Contents from the "Set up Table of Contents > menu". > > Now a Documentation group is going to use my template. They > are all new > to Framemaker. Can I set up a "dummy book" that > they just copy to > their > working directory? I see that I can rename files from > within the book > and get links working but I cannot rename the book file > itself. > > Is there an easy way to get the book file renamed and get > the generated > files like TOC, Index and Glossary working without having > to set them up > from scratch again? > > Do you have any other good ideas on how to optimize a > template for group > usage. > > > > > Med venlig hilsen - Best regards > Verner Andersen > Technical Writer > > Radiometer Medical ApS > Phone +45 3827 3612 > Fax +45 3827 2727 > verner.andersen at radiometer.dk > > > > > Radiometer Medical ApS > Akandevej 21 > 2700 Bronshoj > Denmark > Phone: +45 38 27 38 27 > CVR: 27 50 91 85 > > > > Please be advised that this email may contain confidential > information. > If you are not the intended recipient, please do not read, > copy or > re-transmit this email. If you have received this email in > error, > please notify us by email by replying to the sender and by > telephone > (call us collect at +1 202-828-0850) and delete this > message and any > attachments. Thank you in advance for your cooperation and > assistance. > > In addition, Danaher and its subsidiaries disclaim that the > content of > this email constitutes an offer to enter into, or the > acceptance of, > any > contract or agreement or any amendment thereto; provided > that the > foregoing disclaimer does not invalidate the binding effect > of any > digital or other electronic reproduction of a manual > signature that is > included in any attachment to this email. > ___ > > > You are currently subscribed to Framers as > dspreadb at yahoo.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/dspreadb%40yahoo.com > > Send administrative questions to listadmin at frameusers.com. > Visit > http://www.frameusers.com/ for more resources and info. > > > > > ___ > > > You are currently subscribed to Framers as > neat_gent at yahoo.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/neat_gent%40yahoo.com > > Send administr
FM 7.2 starts much slower than 7.1
Framers, I think the new fonts supplied with Frame 7.2 (and 7.1) could do with better documentation. When I received my FM7.2 upgrade I knew it was supplied with a new set of fonts so I looked on the CD but couldn't find them anywhere. After inspecting my FM7.2 installation I found them all lurking in \Program Files\Adobe\FrameMaker7.2\fminit\fonts\Adobe. I then attempted to install the fonts from there using the Windows "Fonts" control panel. After some puzzlement I eventually realised they were "Private Fonts" which could only be used in FM 7.2. They are clearly loaded by FM during program startup and thus lead to the extended startup time. I also eventually discovered that the only way to access the full set of font variations was by setting up paragraph styles. And finally, to embed the fonts in my Acrobat documents, I found I had to go the "Font Locations" dialog in Distiller and update the incorrect path to these private fonts. Why couldn't the FM 7.2 "New Features" PDF not say something like: "FM 7.2 comes with a set of high-quality OpenType fonts. They are loaded during application startup and are then available for use in your FrameMaker documents. You cannot use them in your Windows applications." However, now I know how to use these fonts, thankyou to Adobe for including them! Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: framers-bounces+phil.heron=coda.com at lists.frameusers.com [mailto:framers-bounces+phil.heron=coda@lists.frameusers.com] On Behalf Of Donald M Rinderknecht Sent: 19 May 2006 14:20 To: frame at daube.ch Cc: framers at lists.frameusers.com Subject: Re: FM 7.2 starts much slower than 7.1 Klaus, My machine is similar in configuration to yours and Frame 7.2 loads in about 10 seconds. (7.1 is no longer on this machine.) In my case, "Fonts" also takes the longest time to load (about 7 seconds for a couple hundred fonts). Thanks, Don. Don Rinderknecht -- KD5MVV Meteorologist Instructor/Developer ~ Warning Decision Training Branch Donald.M.Rinderknecht at noaa.gov ~ http://wdtb.noaa.gov Klaus Daube wrote: > Dear all, > > FM 7.2 starts very slow compared to 7.1 - what may be the reason? > > Machine: 3 GHz, 1GB RAM, drives C[System[ and H[Programs] are on an SATA 100 > disk > > OS XP SP2 with all automatic updates > > FM in both cases with Shlomo Perets' toolbar > > location H:\Adobe\framemaker.72en\FrameMaker.exe > >H:\adobe\FrameMaker.71en\FrameMaker.exe > > Starting FM 7.2b144 for the first time after Windows start > > 0 sec double click on framemaker.exe > > 7 splash sreen appears and immediately shows 'Fonts' > > 34 fonts are loaded and start sequnece continues > > (thats 27 seconds for font business) > > 40 FM Window appears, start of plugins etc. begins > > Further starts: > > 0 sec double click on framemaker.exe > > 5 FM Window appears, start of plugins etc. begins > > Starting FM 7.1p116 for the first time after Windows start > > 0 sec double click on framemaker.exe > > 10 FM Window appears > > Further starts: > > 0 sec double click on framemaker.exe > > 2 FM Window appears > > What may be the reason for the much more time consuming font handling in FM > 7.2? > > Klaus Daube > > > > Docu + Design Daube; Sch??racher 11; CH-8053 Z??rich > > Technical documentation & consultancy; On-line and paper > > Phone: +41-44-422 86 25 FAX: +41-44-422 82 78 > > E-mail: ddd at daube.ch Web: www.daube.ch/ >___ > > >You are currently subscribed to Framers as Donald.M.Rinderknecht at noaa.gov. > >Send list messages to framers at lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscribe at lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/donald.m.rinderknec >ht%40noaa.gov > >Send administrative questions to lisa at frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. > > ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group c
Registry Settings
I think the value is stored in the ACP (ANSI code page) key under: HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Nls\CodePage My standard system has 1252 (Western European) and my Trad. Chinese system has 950 for this key. The character set used in the Command Prompt window is stored in the OEMCP key. Hope this helps! _ Phil Heron CODA Group International Ltd Tel +44 (0)1423 50 __ -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Rick Quatro Sent: 23 April 2007 13:39 To: framers at lists.frameusers.com; framers at omsys.com Subject: OT: Registry Settings Hello Framers, With Windows XP I am using Control Panel > Regional and Language Options. I click the Advanced tab and choose a language from the Language for non-Unicode programs menu. I need to know what key this is stored under in the registry. If someone can steer me in the right direction, I would appreciate it. Thanks. Rick Quatro Carmen Publishing 585-659-8267 www.frameexpert.com ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
Configuring Paste
Zo?, Open the maker.ini file (in \Program Files\Adobe\FrameMaker7.2). Find this line: ClipboardFormatsPriorities=FILE, OLE 2, EMF, META, DIB, BMP, MIF, RTF, TEXT Change it to: ClipboardFormatsPriorities=TEXT, FILE, OLE 2, EMF, META, DIB, BMP, MIF, RTF Phil _ Phil Heron CODA Group International Ltd Tel +44 (0)1423 50 __ -Original Message- From: framers-bounces+phil.heron=coda.com at lists.frameusers.com [mailto:framers-bounces+phil.heron=coda@lists.frameusers.com] On Behalf Of Zoe Lawson Sent: 02 March 2007 15:35 To: framers at lists.frameusers.com Subject: Configuring Paste Greetings, Sometime ago, someone posted a lovely little trick where you can change something, somewhere and configure your paste settings. By default, if you copy something from Word and paste it into Frame, you get a Word object or something. I want to paste text. I edited a file somewhere, based off of suggestions from this list, and fixed it. Now I can't find the setting again. I'm having trouble finding my login for the FrameUsers site, so can't search the archives. If someone who remembers this setting would be so kind as to post it again, I'd really appreciate it. I'm now using FrameMaker 7.1p114, if that makes a difference. Thanks! Zo? Sucker-punch spam with award-winning protection. Try the free Yahoo! Mail Beta. http://advision.webevents.yahoo.com/mailbeta/features_spam.html ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
Strange behavior when opening frop down lists in dialog boxes
Leah, I believe this is known behaviour when using the "Windows Classic" theme in XP. Could this be your situation? Phil Heron -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Leah Smaller Sent: 10 October 2007 07:52 To: Frame Users Subject: Strange behavior when opening frop down lists in dialog boxes Good morning all, FM 7.0 Windows XP This strange thing is happening in dialog boxes. I wonder if it has always been this way (not logical) and I never noticed or this is some new. weird, skewed behavior. When first opening a dialog (for instance, the Character Designer) it takes more than one click on an arrow to open a drop down list (the font list, for instance). In fact, in fact it takes about 3 clicks: Click 1 - nothing happens Click 2 - the field is now in focus Click 3 - drop down list, well...drops down. After this intial 3 click process, any other drop down menu in the dialog box opens with the normal one click. As long as the dialog box stays open the 3 click operation does not return. However, after closing the dialog box and opening it again, 3 clicks to open a drop down list are necessary. This, of course, slows down the work pace and it is a pity to add extraneous mouse clicks to over worked hands. Any guesses as how to take care of this annoying problem? Leah Smaller Technical Communicator Certified Feldenkrais Method practitioner leah at compulite.com "What you truly learn best will appear to you later as your own discovery." (Dr. Moshe Feldenkrais) ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
FrameMaker 8 Online Manuals
Try here: http://www.adobe.com/support/documentation/en/framemaker/ There are two structure manuals for V8 - a Developer's Guide and a Developer's Reference. Phil Heron -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Rick Quatro Sent: 12 October 2007 15:08 To: framers at lists.frameusers.com; framers at omsys.com Subject: FrameMaker 8 Online Manuals Hello Framers, I am sorry for the repeat question, as I think it has been asked before. I am looking for the FrameMaker 8 Online Manuals, particulary the Structured Application Developers Manual. Thanks in advance. Rick Quatro Carmen Publishing 585-659-8267 www.frameexpert.com ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
RE: Easiest way to create a new book from a template (unstructuredFM8)
Peter, Try the Frame Template Packs. Although designed for Frame 5.5, they can be used just as well with more up-to-date versions of FrameMaker. You can get the template packs from: http://www.adobe.com/products/framemaker/tempseries/ Phil Heron -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Peter Courlis Sent: 12 January 2009 12:29 To: framers@lists.frameusers.com; Andersen, Verner Engell VEA; dspre...@yahoo.com Subject: Re: Easiest way to create a new book from a template (unstructured FM8) Good Morning, Does anyone know of a source of Book templates (free) that a newbie might have access to, for study? TIA -peter --- On Mon, 1/12/09, David Spreadbury wrote: > From: David Spreadbury > Subject: Re: Easiest way to create a new book from a template (unstructured > FM8) > To: framers@lists.frameusers.com, "Andersen, Verner Engell VEA" > > Date: Monday, January 12, 2009, 6:49 AM > Verner, > You should be able to do a File > Save Book As, renaming > the book file. This should rename your generated files to > match the book filename. > > --- On Mon, 1/12/09, Andersen, Verner Engell VEA > wrote: > > From: Andersen, Verner Engell VEA > > Subject: Easiest way to create a new book from a template > (unstructured FM8) > To: framers@lists.frameusers.com > Date: Monday, January 12, 2009, 2:42 AM > > My FM template contains all formats in the book. When I > create a new > book I take a chapter file at set it all up from there: > > Add front page, toc, chapters, glossary index and rear > page. All set up > by using specific headings to call the correct master > pages. I set up > the page and chapter numbering from the book and set up the > Table of > Contents from the "Set up Table of Contents > menu". > > Now a Documentation group is going to use my template. They > are all new > to Framemaker. Can I set up a "dummy book" that > they just copy to > their > working directory? I see that I can rename files from > within the book > and get links working but I cannot rename the book file > itself. > > Is there an easy way to get the book file renamed and get > the generated > files like TOC, Index and Glossary working without having > to set them up > from scratch again? > > Do you have any other good ideas on how to optimize a > template for group > usage. > > > > > Med venlig hilsen - Best regards > Verner Andersen > Technical Writer > > Radiometer Medical ApS > Phone +45 3827 3612 > Fax +45 3827 2727 > verner.ander...@radiometer.dk > > > > > Radiometer Medical ApS > Akandevej 21 > 2700 Bronshoj > Denmark > Phone: +45 38 27 38 27 > CVR: 27 50 91 85 > > > > Please be advised that this email may contain confidential > information. > If you are not the intended recipient, please do not read, > copy or > re-transmit this email. If you have received this email in > error, > please notify us by email by replying to the sender and by > telephone > (call us collect at +1 202-828-0850) and delete this > message and any > attachments. Thank you in advance for your cooperation and > assistance. > > In addition, Danaher and its subsidiaries disclaim that the > content of > this email constitutes an offer to enter into, or the > acceptance of, > any > contract or agreement or any amendment thereto; provided > that the > foregoing disclaimer does not invalidate the binding effect > of any > digital or other electronic reproduction of a manual > signature that is > included in any attachment to this email. > ___ > > > You are currently subscribed to Framers as > dspre...@yahoo.com. > > Send list messages to fram...@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/dspreadb%40yahoo.com > > Send administrative questions to listad...@frameusers.com. > Visit > http://www.frameusers.com/ for more resources and info. > > > > > ___ > > > You are currently subscribed to Framers as > neat_g...@yahoo.com. > > Send list messages to fram...@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/neat_gent%40yahoo.com > > Send administrative questions to listad...@frameusers.
RE: Omega symbol becomes W in pdf
Two things for you to check, Nancy: 1. Make sure you have the Windows Symbol font installed. This is used in some magic way by Distiller and it's abcense causes the sort of problem you are seeing. 2. In FrameMaker, check that your Symbol character tag uses the Windows "Symbol" font and NOT the "Symbol Std" font. Symbol Std is a private font installed by FrameMaker. HTH Phil Heron -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Nancy Allison Sent: 17 March 2009 21:46 To: framers@lists.frameusers.com Subject: Omega symbol becomes W in pdf My document uses some special symbols, like the Omega. To create it, I type W and then apply a Symbol character tag, which applies the Symbol font. I've created PDFs from this file in two ways: ---Used Framemaker's "Save as" feature. ---Printed to .ps file and opened it in Acrobat Distiller. In this case, I've deselected "Do not send fonts to printer." I believe this should assure that the Symbol font is sent to the printer. Either way, the Omega character is turned back into a W in the final PDF. This is also happening with the Symbol +/minus sign (the plus is directly over the minus) -- it is transformed into a plain minus sign. NOT GOOD. I'm sure this problem is as old as the hills, but I have Googled lots of phrases and have not found a good treatment of this subject. In the short term, I'm creating .gifs of the symbols and importing them into the text as graphics, but that is time-consuming and clumsy. All suggestions will be very welcome. --Nancy ___ You are currently subscribed to Framers as phil.he...@coda.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: Chinese Characters in User Variables
Hi Nate, You don't specify which version of FrameMaker you're using, but, at least for versions 7.2 and earlier, you need to set the operating system's language for non-Unicode programs to an appropriate value to successfully use Far Eastern languages in dialog boxes. 1. In Windows Control Panel, open the "Regional and Language Options" applet. 2. In the "Regional and Language Options" dialog, display the "Advanced" tab. 3. Select the language you want to work with, for example Chinese (PRC). 4. Restart the computer. If the language you want doesn't appear in the list you will need to add it using the "Languages" tab. This setting only applies to non-Unicode programs such as FrameMaker V7.2 and earlier. Hope this helps, Phil Heron -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Nate Stelton Sent: 20 May 2009 16:48 To: framers@lists.frameusers.com Subject: Chinese Characters in User Variables Ah, it's good to be back on Framers after a 15-or-so-year hiatus! My question: On an XP machine localized for CH, I'm trying to convert and translate a manual into Simplified Chinese. I'm doing fine with entering or pasting characters directly into the document, but am having no success with variables. In the edit variable window I can get a character in and displaying correctly, but as soon as I space over to do the next character, the previous one changes to a question mark. I hope there is just a simple setting or step I'm missing. Any suggestions? Thanks! Nate Stelton ___ You are currently subscribed to Framers as phil.he...@coda.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: Frame Maker 9 and some questions about its indexing and pagelimits
Someone took my keyboard once while I was at lunch. When I tracked it down the offender's explanation was "It didn't look like anyone was using it". Phil Heron -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of davec2...@aim.com Sent: 04 August 2009 23:48 To: framers@lists.frameusers.com Subject: Re: Frame Maker 9 and some questions about its indexing and page limits And if Martians abducted me I'd not be able to finish the document... I've never heard of anyone "borrowing" a monitor that was on and connected to someone's computer. As well, it seems a reach... Dave From: barry.kief...@jeppesen.com The real problem with this is if you move all of your boxes and pods to the second monitor, and someone "borrows" your second monitor when you are in the rest room, when you get back you no longer have any FrameMaker 9 controls. > Finally, does anyone with FM use two screens? I am unhappy with all these > boxes and pods in FM9 and would like them all on a second screen (which I > would have to buy). I have not learnt how to dock them yet. Any hints > gratefully received. > > Rob Shell ___ You are currently subscribed to Framers as phil.he...@coda.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd, CODA 2go Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA 2go Ltd: Registered in England 2534602 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Frame 7.2 and Vista
Framers, I have just received a new PC - it's running Windows Vista. I installed Frame 7.2 (build 144) successfully but found I was unable to install the patch to update it to build 158. I know Frame 7.2 is not officially supported on Vista but I am not currently in a position to upgrade to Frame 8. Does anybody have any experience with running this combination? I would be particulary interested in finding out how stable Frame 7.2 is on Vista and whether there is any way I can install the 158 patch. Thanks, Phil Heron Technical Writer - CODA www.coda.com Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Frame 7.2 and Vista
Hooray - it worked! Thankyou very much for the hint, Denise. Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Denise L. Moss-Fritch Sent: 12 September 2007 16:03 To: Phil Heron; 'framers' Subject: RE: Frame 7.2 and Vista Phil, I have not tried the following with the FM 7.2 patches, however the following did work with another application. Right-click on the patch file and select Properties. >From the Compatibility tab of the Properties dialog, select Run this program in the compatibility mode for check box and select Windows XP (Service Patch 2). Click OK. Now try running the patch. Best, Denise L. Moss-Fritch -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Phil Heron Sent: Wednesday, September 12, 2007 7:39 AM To: framers Subject: Frame 7.2 and Vista Framers, I have just received a new PC - it's running Windows Vista. I installed Frame 7.2 (build 144) successfully but found I was unable to install the patch to update it to build 158. I know Frame 7.2 is not officially supported on Vista but I am not currently in a position to upgrade to Frame 8. Does anybody have any experience with running this combination? I would be particulary interested in finding out how stable Frame 7.2 is on Vista and whether there is any way I can install the 158 patch. Thanks, Phil Heron Technical Writer - CODA www.coda.com Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/d.mossfritch%40comca st.n et Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: and yet another dumb question
Try the FrameMaker Developer Center at: http://www.adobe.com/devnet/framemaker/ There's a link on that page to the documentation - "Developer Resources - Manuals". Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gail Former Sent: 18 September 2007 18:43 To: framers@lists.frameusers.com Subject: and yet another dumb question Hi All I have just had the trial version of FM 8 added to my applications, and wonder where the Structured Application Developer's Guide went. Is it no longer available? Not furnished with the trial version? Somewhere else? If someone could point me to it, I would be grateful. Thanks Gail, confused in Indiana ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: and yet another dumb question
That's strange - I'm sure that last time I looked at that page it was the V8 manual. Phil Heron -Original Message- From: Gail Former [mailto:[EMAIL PROTECTED] Sent: 19 September 2007 13:03 To: Phil Heron Cc: framers Subject: Re: and yet another dumb question Thanks for the link, but that one is titled for version 7.1, which I already have. Gail Phil Heron wrote: > Try the FrameMaker Developer Center at: > http://www.adobe.com/devnet/framemaker/ > > There's a link on that page to the documentation - "Developer > Resources > - Manuals". > > Phil Heron > Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: and yet another dumb question
Aha - I've found it: http://www.adobe.com/support/documentation/en/framemaker/ There are two structure manuals for V8 - a Developer's Guide and a Developer's Reference. Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Phil Heron Sent: 19 September 2007 14:14 To: framers Subject: RE: and yet another dumb question That's strange - I'm sure that last time I looked at that page it was the V8 manual. Phil Heron -Original Message- From: Gail Former [mailto:[EMAIL PROTECTED] Sent: 19 September 2007 13:03 To: Phil Heron Cc: framers Subject: Re: and yet another dumb question Thanks for the link, but that one is titled for version 7.1, which I already have. Gail Phil Heron wrote: > Try the FrameMaker Developer Center at: > http://www.adobe.com/devnet/framemaker/ > > There's a link on that page to the documentation - "Developer > Resources > - Manuals". > > Phil Heron > Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Strange behavior when opening frop down lists in dialog boxes
Leah, I believe this is known behaviour when using the "Windows Classic" theme in XP. Could this be your situation? Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leah Smaller Sent: 10 October 2007 07:52 To: Frame Users Subject: Strange behavior when opening frop down lists in dialog boxes Good morning all, FM 7.0 Windows XP This strange thing is happening in dialog boxes. I wonder if it has always been this way (not logical) and I never noticed or this is some new. weird, skewed behavior. When first opening a dialog (for instance, the Character Designer) it takes more than one click on an arrow to open a drop down list (the font list, for instance). In fact, in fact it takes about 3 clicks: Click 1 - nothing happens Click 2 - the field is now in focus Click 3 - drop down list, well...drops down. After this intial 3 click process, any other drop down menu in the dialog box opens with the normal one click. As long as the dialog box stays open the 3 click operation does not return. However, after closing the dialog box and opening it again, 3 clicks to open a drop down list are necessary. This, of course, slows down the work pace and it is a pity to add extraneous mouse clicks to over worked hands. Any guesses as how to take care of this annoying problem? Leah Smaller Technical Communicator Certified Feldenkrais Method practitioner [EMAIL PROTECTED] "What you truly learn best will appear to you later as your own discovery." (Dr. Moshe Feldenkrais) ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: FrameMaker 8 Online Manuals
Try here: http://www.adobe.com/support/documentation/en/framemaker/ There are two structure manuals for V8 - a Developer's Guide and a Developer's Reference. Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick Quatro Sent: 12 October 2007 15:08 To: framers@lists.frameusers.com; [EMAIL PROTECTED] Subject: FrameMaker 8 Online Manuals Hello Framers, I am sorry for the repeat question, as I think it has been asked before. I am looking for the FrameMaker 8 Online Manuals, particulary the Structured Application Developers Manual. Thanks in advance. Rick Quatro Carmen Publishing 585-659-8267 www.frameexpert.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Frame 7.2 and Vista
Hi Edwin, I do have Frame 7.2 installed under Vista but I haven't been using it intensively on this platform - my primary working environment is still XP. There was no problem with the standard installation of Frame, but I didn't install the included Acrobat Distiller as I already have Acrobat 8 Pro. As I mentioned in my message to the Framers list, I was at first unable to install the build 158 patch, but after trying the following suggestion from Denise L. Moss-Fritch I was able to apply the update: --- Right-click on the patch file and select Properties. >From the Compatibility tab of the Properties dialog, select "Run this program in the compatibility mode for" check box and select Windows XP (Service Patch 2). Click OK. --- I haven't noticed any problems with Frame 7.2 on Vista but, as I mentioned, I haven't been using it intensively. Incidentally, I recently had to edit some old Frame 5.5 documents and I was surpised to find that Frame 5.5.6 installed and worked unexpectedly smoothly under Vista. If I had had the choice, I would have chosen XP for my new PC. I find some features of Vista extremely awkward, in particular the new version of Windows Explorer. Hope this helps, Phil Heron From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 28 February 2008 16:07 To: Phil Heron Subject: Re: Frame 7.2 and Vista Hi Phil, I'm interested in your experience with Frame 7.2 and Vista. I was thinking about getting Vista, and wanted to know if Frame 7.2 works OK on it. Many thanks for any information. Edwin Tudsbery Inactive hide details for "Phil Heron" <[EMAIL PROTECTED]>"Phil Heron" <[EMAIL PROTECTED]> "Phil Heron" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 12/09/2007 16:39 To "framers" <[EMAIL PROTECTED]> cc Subject Frame 7.2 and Vista Framers, I have just received a new PC - it's running Windows Vista. I installed Frame 7.2 (build 144) successfully but found I was unable to install the patch to update it to build 158. I know Frame 7.2 is not officially supported on Vista but I am not currently in a position to upgrade to Frame 8. Does anybody have any experience with running this combination? I would be particulary interested in finding out how stable Frame 7.2 is on Vista and whether there is any way I can install the 158 patch. Thanks, Phil Heron Technical Writer - CODA www.coda.com Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/etudsbery%40cpagloba l.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It is intended solely for the addressee; access to this email by anyone else is unauthorised. If you are not the intended recipient: (1) you are kindly requested to return a copy of this message to the sender indicating that you have received it in error, and to destroy the received copy; and (2) any disclosure or distribution of this message, as well as any action taken or omitted to be taken in reliance on its content, is prohibited and may be unlawful.
RE: Japanese FrameMaker
Paul, I have not seen V8 but the previous Windows versions do include the language versions you mention. However, the serial number provided when you buy the package only allows you to install the language purchased. If you want to install the Japanese version you will need a Japanese specific serial number. I would expect you could buy this from any territory. Note that if you only need access to the Japanese-specific features, not the Japanese UI, you can obtain these from the standard English language version. To do this on Windows XP, change the system setting "Language for non-Unicode programs" to Japanese. Ha - I've just realised that Frame 8 is, unlike previous versions, a Unicode application. In this case, take a look at the Asian Language Features Information on the FrameMaker Preferences dialog to see which Japanese features are available. Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Findon Sent: 23 April 2008 16:16 To: Framers Subject: Japanese FrameMaker Framers, Mac FrameMaker 6 and 7 CDs contain a single installation file and when launched you get to choose English, German, French, or Japanese. Can anyone tell me if this is the same for Windows FrameMaker 8.0? I need the Japanese version ASAP. Tried the Adobe Japan online store, but it won't let me buy (non-Japan IP, I guess). Paul ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Extracting copied-in graphics from documents
Hi Geoffrey, I'm not an expert on graphics but I've had success in the past using the "Save as HTML" function in both Frame and Word. Taking this option saves each image as a graphic file. In Frame, you can choose between GIF, JPEG and PNG as the graphic format. Specify which one to use on the HTML Options dialog (Utilities > HTML Setup - Options button). I'm not sure what format Word uses or whether you have a choice of formats. Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Geoffrey Marnell Sent: 02 May 2008 01:02 To: framers@lists.frameusers.com Subject: Extracting copied-in graphics from documents Hi Framers, A posting some weeks ago mentioned a utility that could extract graphics copied into FM files and restore them in their original format. I should have been paying more attention at the time, but can someone remind me what that utility is called? (I'm hoping it can do a better job than Acrobat.) BTW: does anyone know of a similar utility that can pull graphics out of MS Word documents? Cheers Geoffrey Marnell Principal Consultant Abelard Consulting Pty Ltd T: (+61 3) 9596 3456 F: (+61 3) 9596 3625 W: http://www.abelard.com.au <http://www.abelard.com.au/> ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: How to include font size indicator on formatting toolbar
Which version of FrameMaker are you using? Several new icons were added to the formatting toolbar for V7.2, including the one for font size. If you have a previous version of FrameMaker chances are you won't have the new icon. Phil Heron Technical Writer - CODA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Duncan, Gary Sent: 06 June 2008 14:55 To: Bodvar Bjorgvinsson Cc: framers@lists.frameusers.com Subject: RE: How to include font size indicator on formatting toolbar No, I mean how do you include the font size indicator in the formatting bar. My colleague has everything up to the paragraph tag indicator. My tool bar shows the font size directly to the right of that field. I couldn't find a way to customize the tool bar to include that. -Original Message- From: Bodvar Bjorgvinsson [mailto:[EMAIL PROTECTED] Sent: Friday, June 06, 2008 8:08 AM To: Duncan, Gary Cc: framers@lists.frameusers.com Subject: Re: How to include font size indicator on formatting toolbar You mean: View > Formatting Bar ? Bodvar On Thu, Jun 5, 2008 at 7:52 PM, Duncan, Gary <[EMAIL PROTECTED]> wrote: > Hi everyone, > > > > A colleague wants to know how to get the font size indicator to show on > the Frame formatting toolbar. This shows on my tool bar but I cannot > remember how I got it to show. > > > > Does anyone know how to make this show on the toolbar? > > > > Thank you... > > > > Gary > > ___ > > > You are currently subscribed to Framers as [EMAIL PROTECTED] > > Send list messages to [EMAIL PROTECTED] > > To unsubscribe send a blank email to > [EMAIL PROTECTED] > or visit http://lists.frameusers.com/mailman/options/framers/bodvar%40gmail.com > > Send administrative questions to [EMAIL PROTECTED] Visit > http://www.frameusers.com/ for more resources and info. > -- "It is impossible to make anything foolproof because fools are so ingenious." -- Edsel Murphy, dec. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: How to prevent Framemaker changing the Link
Michael, If I remember correctly, typing a string such as \d in a Frame dialog box is a way of typing a special character, in this case the dagger character. I believe the way to put the directory separator in is to use the unix-style /, ie a forward slash like this: message openfile "W:/Schadstoffliteratur/Dioxine/Attempt to establish benchmarks for Dioxins.pdf" Hope this helps, Phil Heron Technical Writer - CODA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Böhme Sent: 23 September 2008 11:59 To: framers@lists.frameusers.com Subject: How to prevent Framemaker changing the Link Hallo, I have a Problem which has hopefully an easy solution. I try to make Hyperlinks to open an other PDF on my harddisk. I write: message openfile "W:\Schadstoffliteratur\Dioxine\Attempt to establish benchmarks for Dioxins.pdf" Than Framemaker convert this to: message openfile "W:\Schadstoffliteratur‡ioxine\Attempt to establish benchmarks for Dioxins.pdf" Looking in the MIF I see the following: The resulting Link does not work, of course. When I repair the link in the MIF manually, open it in FM, print to PDF, it works fine: But I may not touch the Link in Framemaker again. I want to make hundreds of similar Links, so I am looking for a solution. How to prevent Framemaker changing the Link? Michael FM 8.0p277 ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: "An error occurred while printing."
Nina, Does the folder name have a punctuation character in it by any chance? There's an ancient known problem with FrameMaker in that it can't print to a folder with a punctuation character. Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nina Rogers Sent: 27 October 2008 18:17 To: framers@lists.frameusers.com Subject: "An error occurred while printing." I am in Framemaker 7.2 and am trying to print to PDF. Generally I have no problem doing this, but today I am getting the message "An error occurred while printing." I haven't changed any settings since the last time I printed to PDF (either last Friday or Saturday), so I'm stumped as to what might be causing the error. I know this is a very general question, but I've already tried closing and opening Framemaker, restarting the computer, etc. Any ideas? Thanks! Nina Rogers, Technical Writer Tax Development (Federal) Drake Software (828) 524-8020 x4204 [EMAIL PROTECTED] This email (including any attachments) contains PRIVILEGED AND CONFIDENTIAL INFORMATION protected by federal and/or state law and is intended only for the use of the individual(s) or entity(ies) designated as recipient(s). The information contained within this email should not be construed as tax advice. If you are not an intended recipient of the email, you are hereby notified that any disclosure, copying, distribution, or action taken in reliance on the contents of this email is strictly prohibited. Disclosure to anyone other than the intended recipient does not constitute a waiver of any applicable privilege. If you have received this email in error, please immediately notify us by phone at (828) 524-2922 or by email at [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> and then permanently delete the original and any copy of this email (including any attachments) and destroy any printout thereof. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: party invitation
Deirdre, Have you explored the Frame Template Packs? Template Pack 2 contains some "Fun Stuff" templates, including some for foldable cards. Although designed for Frame 5.5, they can be used just as well with more up-to-date versions of FrameMaker. You can get the template packs from: http://www.adobe.com/products/framemaker/tempseries/ Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Deirdre Reagan Sent: 02 December 2008 17:20 To: Framer's List Subject: party invitation Hi all: FM 8.0 -- Windows XP. I am making our holiday party invitations -- is FM a good product to use, or would word be better. I don't have any good publishing software. Unless FM is good publishing software, of course! LOL Deirdre ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
default fonts in Framemaker 6
When you create a new document in FrameMaker, the paragraph and character formats etc are derived from the document used as the template for the new document. If you create a new document using the File > New menu option, FrameMaker bases the document on the file "custom" in the FrameMaker fminit directory. As this is a FrameMaker document you can open it and make changes to the paragraph formats and so on. Save it with the same name and FrameMaker will use it as the template for any future custom documents. This procedure is described in the Frame manual in the section "Changing templates for blank paper and text files", P293 for Frame 5.5, P326 for Frame 7 (I don't have Frame 6). It's probably also in the online help. I think you are mistaken about Distiller failing to produce press-quality PDF files if it finds any Truetype fonts. There have been many messages on this list from Dov Isaacs of Adobe about this very subject. Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: framers-bounces+phil.heron=coda.com at lists.frameusers.com [mailto:framers-bounces+phil.heron=coda@lists.frameusers.com] On Behalf Of patrick scully Sent: 21 December 2005 16:35 To: framers at lists.frameusers.com Subject: default fonts in Framemaker 6 Dear Framemaker users, Is it possible to change the default font (currently Times New Roman) that Framemaker uses for paragraph, character, table formats etc? I have looked in maker.ini, but its font defaults relate ONLY to what font substitutions are made where a user doesn't have a particular font. I don't EVER want to use Times New Roman or any other Truetype font in a document that I prepare for commercial printing. Distiller fails to produce press-quality PDF files if it finds any Truetype fonts. And it can be very difficult to find exactly where the Truetype font is lurking in a Framemaker document. The only workaround I can see currently is to delete everything from the paragraph, character and table catalogs, and start from scratch. Thanks Patrick Scully, Director R?dacteurs Ltd, 165 Howth Road, Dublin 3 00 353 1 8330444 00 353 87 2362563 www.redact.ie * Economic & Technology Reports * Policies & Procedures * User Documentation * Information Mapping Training ___ You are currently subscribed to Framers as phil.heron at coda.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. CODA Wins 5th Accountancy Age Award in 5 Years For details visit www.coda.com/winners <http://www.coda.com/winners> The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening.
Difference between us and international english Framemaker
Verner, I believe my copy of FramMaker is the International English one. When you install it you see a dialog asking you to choose between US English or International English. I guess you wouldn't see this dialog if you had a US-only version. Choosing International English installs A4 versions of the custom templates. I don't think there's any other difference. (One extra step I take after installing is to change the "Language" setting in maker.ini from USEnglish to UKEnglish - this sets UK English as the default language in the designers.) _____ Phil Heron CODA Group International Ltd Tel +44 (0)1423 50 __ -Original Message- From: framers-bounces+phil.heron=coda.com at lists.frameusers.com [mailto:framers-bounces+phil.heron=coda@lists.frameusers.com] On Behalf Of Andersen, Verner Engell VEA Sent: 14 December 2006 07:21 To: Framers at FrameUsers.com Subject: Difference between us and international english Framemaker All Is there a difference between International and US Framemaker. My manager has bought the International version of FrameMaker for me. Our corporate language is US English. Verner Andersen Technical Writer Radiometer Medical ApS ?kandevej 21 ? 2700 Br?nsh?j ? Denmark Tel. +45 38 27 36 12 Mobile. + 45 60 62 27 90 E-mail: verner.andersen at radiometer.dk Web: www.radiometer.com This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening
HTML character entities in XML files
Mark, In answer to your question about character entities in xml files, here are two solutions to your problem: 1. Easy solution: If you only want to use one or two character entities, add the definitions to your DTD. For a non-breaking space, add a line such as the following to your DTD: 2. More flexible solution To use entity definitions stored in a file with structured Frame you will need 3 things: 1. The file(s) storing the entity definitions. 2. A reference to the entity definitions in the DTD 3. A reference to the location of the entity definition file(s) in the strctured application definition document. Take a look at the example structured applications supplied with Frame to see how this works. Frame XHTML structured application - - The entity definitions are stored in 3 files in the structure\xml\xhtml\app directory. You can find in xhtml-lat1.ent. - The entity definitions are referenced in the DTD (called "dtd" in this case). - Entity locations are specified in structapps.fm in the "Entity locations" element. Frame xDocBook structured application - - The entity definitions are stored in the .ent files in the structure\xml\isoents directory. You can find in iso-num.ent. - The entity definitions are referenced in the DocBook XML Character Entities module of the DTD (in the file called "dbcentx.mod" in this case). - Entity locations are specified in structapps.fm in the "Entity locations" element. NB: If you want to open xml files based on the Frame XHTML or xDocBook DTDs in an xml editor such as XMetaL, you need to specify the entity file locations in the DTD. Hope this is not too incomprehensible, Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: owner-framers at omsys.com [mailto:owner-fram...@omsys.com] On Behalf Of Mark Barratt Sent: 09 January 2006 11:15 To: FrameSGML at yahoogroups.com; Free Framers Subject: HTML character entities in XML files I have a contributor who sends me XML files containing HTML character entities - particularly , but also some others. (it's a byproduct of his editing software) These are not recognised by my XML Frame application. I have #include "isoall.rw" in my rules file, but note that nbsp isn't among the entities in any of the iso files. Ideas on the simplest/cleanest way to deal with this? -- Mark Barratt Text Matters Information design: we help explain things using language | design | systems | process improvement __ phone +44 (0)118 986 8313 email markb at textmatters.com web http://www.textmatters.com ** To unsubscribe, send a message to majordomo at omsys.com ** ** with "unsubscribe framers" (no quotes) in the body. ** CODA Wins 5th Accountancy Age Award in 5 Years For details visit www.coda.com/winners <http://www.coda.com/winners> The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening.
Problems with special characters
Mathieu, Alt+242 was the code for the "greater or equal than" symbol in the US MS-DOS codepage 437. This character is not available in the Windows Western European codepage (1252) or the matching MS-DOS codepage 850. The character is, however, available in the Symbol font. To use this character in FrameMaker: 1. Choose the Symbol font 2. Press Ctrl + q and then 3 OR type Alt + 0178 All the characters available with FrameMaker are listed in the online "Character Sets" manual. Phil Heron Technical Writer - CODA -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of mathieu jacquet Sent: 05 July 2006 09:25 To: framers at lists.frameusers.com Subject: Problems with special characters Dear all, I have a tough time finding shortcuts for special characters. On the Internet, I found an Ascii table which specifies ALT + 242 for "greater or equal than" ; unfortunately, when I type that, an "equal" character appears. I modified the regional options on my computer (set to French at first) through the configuration panel but it did not change anything. I have the same problem for the "different than" character. Do you simply recommend using the Equation palette ? Any help appreciated. Mathieu ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening
FM "cannot find file" message
I had a few problems with FM file associations recently when I removed my old FM7.0 version. I had both FM 7.0 and FM7.2 installed and double-clicking a FM file opened it in FM7.0. Once I removed FM7.0 I could no longer open my FM files from Explorer. To rectify this, I used the fmreg.txt file in the FrameMaker home directory to update the registry. You can open this file to see what it does and to read the instructions for using it. (In short, at a Windows command prompt, change to the FrameMaker program directory and type "FrameMaker -reg" (without the quotes). Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: owner-framers at omsys.com [mailto:owner-fram...@omsys.com] On Behalf Of Brian Wesley Simmons Sent: 17 July 2006 13:32 To: framers at frameusers.com; framers at omsys.com Subject: FM "cannot find file" message Howdy, folks. I like to double-click on my FM files to open both the app and the file. That's just how I like to work. Last week I had a PC crash and had to rebuild my disk, load apps back on, etc. I'm running FM 7.1p114 on Win XP Pro. After getting my apps back on the hard drive, I now find that whenever I double-click on an FM file, even when FM is already open, I get a message like the following: Cannot find the file named Z:\Release. Make sure that the file exists. Now, Z is a mapped drive. The full path is \\rubble\tech pubs\Release Notes\Release-Notes-production\Release-Notes-7.2.1\filename. What appears in the Win Explorer address bar is Z:\Release Notes\Release-Notes-production\Release-Notes-7.2.1\filename. I know someone is going to say, "Eek! Spaces in directory names! How low-class can you be?" Yeah, fine, I'm low-class. The issue is that heretofore, this action has always worked. I have never before gotten this error message. I have always been able to double-click a file in just such a directory structure, and FM has opened it without complaint. I want it to do so again. Changing the directory structure to eliminate spaces in names is not an option. Any ideas why FM is now biffing this simple little task? And how I can make it go back to business as usual? thanks, bws ** To unsubscribe, send a message to majordomo at omsys.com ** ** with "unsubscribe framers" (no quotes) in the body. ** Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening
7.2 message when you save
Caroline, It's in the Preferences dialog - File > Preferences > General. "Show warnings while clearing history". Phil Heron -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Caroline Tabach Sent: 20 July 2006 11:02 To: Framers Subject: 7.2 message when you save We have just installed Version 7.2 (on XP). Adobe seem to be so happy bout the multiple undos that every time we save a document there is a warning saying "Cannot be undone. Undo history will be lost. OK to ontinue?" Is there anyway that we can turn this (rather irritating) message off? Caroline Tabach MarCom RADCOM caroline at radcom.com ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening
Entire FM Help available as a PDF
Also interesting that it was created in March 2002. Has it just been sitting on a shelf unused since then? Still, I'm very pleased to see it available now. Phil Heron -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Steve Rickaby Sent: 08 June 2006 10:09 To: framers at FrameUsers.com; fmforosx at yahoogroups.com Subject: Re: Entire FM Help available as a PDF At 17:10 -0400 7/6/06, Art Campbell wrote: >Most recent posts by Monica Valdez >On-line help is now available as a downloadable PDF - 01:46pm Jun 7, >2006 Pacific - All, > >After much cajoling and patience persistence, my contact at Adobe has >convinced the "powers that be" that it really would be helpful to many, >many FrameMaker users to have the entire on-line FrameMaker Help as a >downloadable PDF. Voila! > >http://www.adobe.com/products/framemaker/pdfs/framemaker_help.pdf Interesting to note that this document was created by 'Adobe Instructional Publishing' using FrameMaker 6 and Acrobat Distiller 5.0 for Mac ;-) Thanks for the link, Art: a fantastic resource. [Cross-posted to 'FrameMaker for OS X' as I know they'll find it useful too.] -- Steve ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Improve speed and cut bank charges with OCRA from CODA. Click here for more... <http://www.coda.com/solutions/Products/Ocra_1.asp> _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening
Speeding up FM 7.2 Startup
Hello Framers, I'm sure most users of Frame 7.2 will have noticed the extended program startup time, compared with Frame 7.0 and earlier versions. It seems that the cause of this is the wide range of private fonts installed with Frame 7.2. These are installed in fminit\fonts\adobe and appear to be loaded during program startup. As I do not use any of the private fonts, I tried removing some of these fonts and, hey presto, startup time is reduced to just a few seconds. For your information, I removed the following fonts: - Japanese (Heisei* and Koz*) - Chinese and Korean (AdobeMingStd, AdobeMyungjoStd-Medium and AdobeSongStd-Light) - Symbol (AdobePiStd and SymbolStd) I also removed the .lst file - a new one was automatically created when I started Frame. I left the Western fonts such as Garamond, Minion and Myriad as I may actually use these. I hope this is useful to some framers, Phil Heron Technical Writer - CODA Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening
Speeding up FM 7.2 Startup
I do use the Symbol font but it's the Microsoft TrueType one shipped with Windows. Consulting my archive, I see that Dov Isaacs sent a message to the list on 25/10/04 stating: "(3) Yes. Some peculiar interaction between the PostScript driver and Windows 2000 / XP / Server 2003 requires that Symbol TrueType font and it uses that font instead of the Type 1 font." I also removed the AdobePiStd font because it has no characters in the range available for use by FrameMaker. Phil Heron -Original Message- From: Steve Rickaby [mailto:srick...@wordmongers.demon.co.uk] Sent: 21 June 2006 16:25 To: framers at FrameUsers.com Cc: Phil Heron Subject: Re: Speeding up FM 7.2 Startup At 15:20 +0100 21/6/06, Phil Heron wrote: >For your information, I removed the following fonts: >- Japanese (Heisei* and Koz*) >- Chinese and Korean (AdobeMingStd, AdobeMyungjoStd-Medium and >AdobeSongStd-Light) >- Symbol (AdobePiStd and SymbolStd) Phil - I seem to remember reading somewhere that FrameMaker malfunctions without the Symbol font. That might no longer be true in 7.2, of course. -- Steve Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening
Speeding up FM 7.2 Startup
Aargh! I've re-instated AdobeStd and AdobePiStd. In my message I also mentioned that I removed the AdobeFnt07.lst file. It seems that this is generated by Acrobat Distiller rather than FrameMaker. Apologies to anyone who has been fruitlessly searching for this file. Phil Heron Technical Writer - CODA -Original Message- From: Dov Isaacs [mailto:isa...@adobe.com] Sent: 21 June 2006 17:26 To: Phil Heron; framers Subject: RE: Speeding up FM 7.2 Startup The AdobePiStd font is a substitution font for ITC Zapf Dingbats used by the PDF Library and by Acrobat when PDF files call for ITC Zapf Dingbats but do not have it installed. In the case of FrameMaker, it may be necessary when PDF files are imported into FrameMaker. It should NOT be removed as part of any expedient for faster FrameMaker loading. - Dov > -Original Message- > From: lists.frameusers.com On Behalf Of Phil Heron > Sent: Wednesday, June 21, 2006 8:36 AM > To: framers > Subject: RE: Speeding up FM 7.2 Startup > > I do use the Symbol font but it's the Microsoft TrueType one shipped > with Windows. > > Consulting my archive, I see that Dov Isaacs sent a message to the > list on 25/10/04 stating: > > "(3) Yes. Some peculiar interaction between the PostScript driver and > Windows 2000 / XP / Server 2003 requires that Symbol TrueType font and > it uses that font instead of the Type 1 font." > > I also removed the AdobePiStd font because it has no characters in the > range available for use by FrameMaker. > > Phil Heron > -Original Message- > From: Steve Rickaby [mailto:srickaby at wordmongers.demon.co.uk] > Sent: 21 June 2006 16:25 > To: framers at FrameUsers.com > Cc: Phil Heron > Subject: Re: Speeding up FM 7.2 Startup > > At 15:20 +0100 21/6/06, Phil Heron wrote: > > >For your information, I removed the following fonts: > >- Japanese (Heisei* and Koz*) > >- Chinese and Korean (AdobeMingStd, AdobeMyungjoStd-Medium and > >AdobeSongStd-Light) > >- Symbol (AdobePiStd and SymbolStd) > > Phil - I seem to remember reading somewhere that FrameMaker > malfunctions without the Symbol font. That might no longer be true in > 7.2, of course. > -- > Steve Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening
Copying Text Box Crashes Frame
I can do this without any problem. Does the problem occur when you create a brand-new document or is it specific to a particular document? I have Frame 7.2 running on Windows XP. What is your environment? Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Katy Wegner Sent: 02 March 2006 19:38 To: framers at lists.frameusers.com Subject: Copying Text Box Crashes Frame FrameMaker 7.0 and now 7.2 When I draw a text box using the tools palette and try to copy it (select the box and click Ctrl C), I get the dreaded Internal Error: 7204, #, ## and FrameMaker shuts down. I was hoping this might get fixed. Does anyone know anything about this? ( just looked through Adobe Forums and FAQs and didn't see it). Thanks, Katy <http://www.lefthandnetworks.com/> <http://www.lefthandnetworks.com/images/email/email_rt.gif> <http://www.lefthandnetworks.com/images/email/clear.gif> Katy Wegner Senior Technical Writer Main: 303.449.4100 Direct: 303.217.9028 Fax: 303.442.0965 katy.wegner at lefthandnetworks.com <mailto:katy.wegner at lefthandnetworks.com> www.lefthandnetworks.com <http://www.lefthandnetworks.com/> ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening.
FrameMaker 6 and Distiller font embedding problem
Here are my answers to these questions: 1. Font licensing Purchasing a font does not necessarily entitle you to embed the font in a PDF file. It depends on the restrictions the font designer has specified for the font. If you have the Microsoft Opentype font properties extension (available from the Microsoft Typography web site www.microsoft.com/truetype), you can inspect the "Embeddability" of the font. If it is set to "Restricted licence embedding" then Acrobat Distiller will not embed it in the PDF file. 2. Acrobat Distiller was the name of the distillation port created by Acrobat up to V5. With V6 the name of the port changed to "Adobe PDF" but it still performs the same function. Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Steve Rickaby Sent: 06 March 2006 11:32 To: framers at FrameUsers.com Subject: FrameMaker 6 and Distiller font embedding problem On behalf of someone on another group... At 11:23 + 6/3/06, Cherie.Ellis at trendcomms.com wrote: >I wonder if anyone can help me regarding font problems with FrameMaker >6.0 and Actobat/Distiller 6.0. > >I have had a problem when distilling a FM file. Distiller cannot embed >a font because of licensing restrictions. We have purchased this font >so it's a mystery why I get this error. I am able to create the PDF >which looks OK on my PC as I have the font but on other PCs Acrobat uses a substitute font. > >We decided to reinstall FM. I used the FM disk to install Acrobat and >Distiller but these are earlier versions so I upgraded to Acrobat >Professional 6.0. > >Unfortunately FM doesn't offer Distiller as a printer option now. I use >Adobe PDF instead to create the PS file and then use Distiller to >create the PDF but I still have the font licence problem. I can live >with not having Distiller as a printer option but I really need to sort >out the font problem. > >Any ideas? -- Steve ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening.
Polish in FrameMaker
Yves, I've tried this out on my system. Here's what I did to copy Polish text from Word to FrameMaker: 1. I defined a FrameMaker paragraph format to use the Arial CE font. 2. I typed some text using Polish characters in a Word document. 3. I selected the text in Word and used Ctrl+C to copy it to the clipboard. 4. In FrameMaker, I put the insertion point into the paragraph formatted with the Arial CE font. 5. I chose Paste Special from the Frame Edit menu and selected RTF as the paste format. Bingo - the Polish characters displayed as expected. You could move RTF to the beginning of the ClipboardFormatsPriorities line in maker.ini. This will allow you to use regular Paste to put the Polish text in. I can also switch to the Polish keyboard and type Polish text directly into Frame. I didn't need to customise maker.ini or use WGL Assistant to activate Arial CE. My environment: Windows XP Professional (UK English default locale) Word XP FrameMaker 7.2 (144) Acrobat 6 Professional Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Yves Barbion Sent: 07 March 2006 15:56 To: framers at lists.frameusers.com Subject: Polish in FrameMaker Hello Framers, here we go again with the old "FrameMaker does not support Unicode" story. A customer of mine has FrameMaker files which already contain Polish text. He has now received some new Polish text in Word which he has to copy and paste in the FrameMaker files. The known problem is that the characters are okay in Word (because Word supports Unicode), but the special (Polish) characters become question marks when you paste the text in FrameMaker. The maker.ini file has been customized and Arial CE has been activated using WGL Assistant. Any ideas? Thanks in advance. Best regards -- Yves Barbion Technical Writer Adobe-Certified FrameMaker Instructor U&I Learning NV (formerly ATeK NV) Molenaarsstraat 111 B-9000 Gent Belgium Tel.: +32 9 265 74 72 Fax: +32 9 265 74 84 www.uni-learning.com The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening.
FrameMaker ROI: Finding Real Examples
You could take a look at the Adobe FrameMaker Customer Stories web page http://www.adobe.com/products/framemaker/customerstories.html. This has case studies of quite a few Frame customers. Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Scott Abel Sent: 08 March 2006 12:20 To: brad Subject: FrameMaker ROI: Finding Real Examples Help Framers! Anyone know of any online resources (articles, etc.) that might help me paint a picture of the ROI possible when moving from unstructured FrameMaker to Structured FrameMaker XML authoring? I need to be able able to reference a real organization by name. Thanks in advance. The Content Wrangler, Inc. Scott Abel, Content Management Strategist 3421 Crystal Lakes Ct., Sarasota FL 34235 abelsp at netdirect.net 941-359-3416 www.thecontentwrangler.com Via Skype: abelsp TheContentWrangler.com - Look there first! ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening.
Unbelievable On-Line Help Stupidity
I am on Windows XP Professional. The instructions you list ("Click Start, click Shut Down, and then in the drop-down list click Shut Down") are perfectly correct for my computer. That is exactly what I see. ?? Phil Heron -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Daniel Emory Sent: 10 March 2006 16:56 To: Framers List Cc: Free Framers List Subject: OT: Unbelievable On-Line Help Stupidity I was helping a friend who'd just acquired her first computer, an E-Machine with Windows XP. I was demonstrating how to get help, and showed how she could type in a search phrase and get a list of all the help topics containing that phrase. So, to demonstrate how to properly shut down the computer, I entered the search phrase "Turn Off." Sure enough, all the help topics containing that phrase appeared, and I selected the"Turn Off The Computer" topic. Here are the instructions which appeared under that topic: "Click Start, click Shut Down, and then in the drop-down list click Shut Down" The only part of that instruction which is correct is "Click Start." o There is no Shut Down option under Start. It's called "Turn Off Computer." o There is no drop-down list under the "Turn Off Computer" dialog. Instead, there are 3 buttons. o There is no button option under "Turn Off Computer" called "Shut Down" Instead there are three button options: "Stand By", "Turn Off", and "Restart." Dan Emory & Associates FrameMaker/FrameMaker+SGML Document Design & Database Publishing ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening.
Unbelievable On-Line Help Stupidity
That's easy enough to change. There's a setting on the Advanced tab of the User Accounts dialog to specify whether users have to use Ctrl+Alt+Delete to log on. Phil Heron -Original Message- From: framers-bounces+phil.heron=coda.com at lists.frameusers.com [mailto:framers-bounces+phil.heron=coda@lists.frameusers.com] On Behalf Of Gagne, Bernard (Bolton) Sent: 10 March 2006 17:11 To: Framers List Cc: Free Framers List Subject: RE: Unbelievable On-Line Help Stupidity Personally, I find the whole idea of clicking "Start" to shutdown somewhat counter-intuitive, and could somebody tell me why I have to use the "three-finger salute" to get my login screen in XP Pro? Once I power up, what else could I possibly want to do with my computer? It should automatically default to the login screen. Just my two-cents' (Canadian) worth. Berny Gagn? Sr. Technical Writer Husky Injection Molding Systems Bolton, Ontario, Canada -Original Message- From: framers-bounces+bgagne=husky...@lists.frameusers.com [mailto:framers-bounces+bgagne=husky.ca at lists.frameusers.com] On Behalf Of Grant Hogarth Sent: Friday, March 10, 2006 12:00 PM To: Framers List Cc: Free Framers List Subject: RE: Unbelievable On-Line Help Stupidity Versionitis strikes again! A rigorous (and repeated) application of QA is the only known pallative -- there is no cure. Grant -Original Message- From: Daniel Emory Sent: Friday, March 10, 2006 9:56 AM To: Framers List Cc: Free Framers List Subject: OT: Unbelievable On-Line Help Stupidity I was helping a friend who'd just acquired her first computer, an E-Machine with Windows XP. I was demonstrating how to get help, and showed how she could type in a search phrase and get a list of all the help topics containing that phrase. So, to demonstrate how to properly shut down the computer, I entered the search phrase "Turn Off." Sure enough, all the help topics containing that phrase appeared, and I selected the"Turn Off The Computer" topic. Here are the instructions which appeared under that topic: "Click Start, click Shut Down, and then in the drop-down list click Shut Down" The only part of that instruction which is correct is "Click Start." o There is no Shut Down option under Start. It's called "Turn Off Computer." o There is no drop-down list under the "Turn Off Computer" dialog. Instead, there are 3 buttons. o There is no button option under "Turn Off Computer" called "Shut Down" Instead there are three button options: "Stand By", "Turn Off", and "Restart." Dan Emory & Associates FrameMaker/FrameMaker+SGML Document Design & Database Publishing ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening.
Chinese-language FM documents
To display the level of support for Asian languages in Frame, choose File > Preferences > General and then click the "Asian Language Features" button. If you are running Frame in a Western environment (for example US English) a message will tell you that you can display Asian text (assuming you have the right fonts installed) but that most Asian language features are disabled. To enable full support for Asian languages (using a Western version of XP), start from the Windows XP Regional and Language Options control panel. - First choose the "Languages" tab. Tick the check box "Install files for East Asian languages". This will cause the necessary support files (fonts, IMEs etc) for Chinese, Japanese etc to be installed. You will probably have to re-start after doing this. - Next choose the Advanced tab from the Regional and Language Options control panel and you will see a box titled "Language for non-Unicode programs". If you are in the US this will probably be US English. Change the language here to the one you want to use in Frame - most likely this will be Simplified Chinese so you should choose Chinese (PRC). You will probably have to re-start again after doing this. Now display Frame's language support again and this time you should be informed that all Asian language features are now supported. If your Chinese speaker is familiar with using Windows to enter Chinese text, they should find that they can now choose their preferred keyboard and enter Chinese text into Windows applications (including Frame) using their normal techniques. If you want more information about using Asian keybards (IMEs) you might want to look at the following Microsoft site: http://www.microsoft.com/globaldev/handson/user/IME_Paper.mspx Hope this is of some help to you, Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of geoffrey.marnell at myob.com Sent: 14 March 2006 00:03 To: framers at lists.frameusers.com Subject: Chinese-language FM documents Hi Framers, I need to edit a book of Chinese-language files (with the help of a Chinese speaker who doesn't know FM). I can read the files in FM 7 running under an English-language version of XP. I can even do some minor editing. But I can't do much with dialogs. I believe that FM 7 can run on a Chinese-language Windows OS with all the functionality it has when running on an English OS. Can someone confirm that that is the case? If FM 7 can run on, say, Chinese-language Windows XP, how does one enter Chinese characters? The online manuals that come with FM 7 say that you need to use a "front-end processor (FEP), which is also known as an Input Method Editor (IME)". What sort of beast is that? And how do you find one? Finally, are there any pitfalls the novice needs to be aware of? (In particular, I need to enter index markers and generate a TOC and index, as well as some minor text edits.) Thanks Geoffrey Marnell___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening.
FrameMaker at Adobe Day
Hello list members, I'm going to the FrameMaker at Adobe day next week (at Adobe UK). Are any other list members going? Phil Heron Technical Writer - CODA www.coda.com The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening.
Help with PDF problem and 11x17 page size
Carla, I think you should be able to create a PDF document containing a mixture of page sizes. I tried this and it worked first time: - Create three Frame files, one portrait, one landscape and one a custom size. - Create a Frame book containing the three files. - Print the book to a file, using the Adobe PDF printer and ticking the "Generate Acrobat Data" box. - Open the generated PS file with Acrobat Distiller. Success! A PDF file is created contining a combination of page sizes. In short: Make sure you are printing to the Adobe PDF printer. Make sure you set "Generate Acrobat Data" Hope this helps, Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: framers-bounces+phil.heron=coda@lists.frameusers.com [mailto:framers-bounces+phil.heron=coda.com at lists.frameusers.com] On Behalf Of Carla Drye Sent: 17 March 2006 16:06 To: framers at lists.frameusers.com Subject: Help with PDF problem and 11x17 page size I'm new so please be kind. I work in Frame 7.1b023 with no plug-ins. I have a book file that incorporates multiple 8-1/2 x 11 page size files, multiple 11 x 17 page size files with cross references within files and from file to file, stand alone TOCs, LOFs, and LOTs that are generated and then copied and pasted into the front of the files. The book is then PDF'd with create hyperlinks turned on. The PDF works great and all the cross references for the TOC, LOF, LOT, from Frame work in the PDF. The problem is that the 11 x 17 pages (which are figures) end up on 8-1/2 x 11 pages in the book PDF. What I have been doing is going into each of the 11 x 17 files (9 total), and saving each as a stand-alone 11 x 17 PDF. Then I exchange each new 11 x 17 PDF for the old 8-1/2 x 11 page in the book PDF file. This works for getting the correct page size, but the link from the LOF (which is not on the 11 x 17 page) does not work. Does anyone have a suggestion on how to make the links work to the 11 x 17 pages? Thanks Carla J.H. Drye, Associate Writer cdrye at sktdayton.com S&K Technologies ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to lisa at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening.
RE: FM 7.2 starts much slower than 7.1
Framers, I think the new fonts supplied with Frame 7.2 (and 7.1) could do with better documentation. When I received my FM7.2 upgrade I knew it was supplied with a new set of fonts so I looked on the CD but couldn't find them anywhere. After inspecting my FM7.2 installation I found them all lurking in \Program Files\Adobe\FrameMaker7.2\fminit\fonts\Adobe. I then attempted to install the fonts from there using the Windows "Fonts" control panel. After some puzzlement I eventually realised they were "Private Fonts" which could only be used in FM 7.2. They are clearly loaded by FM during program startup and thus lead to the extended startup time. I also eventually discovered that the only way to access the full set of font variations was by setting up paragraph styles. And finally, to embed the fonts in my Acrobat documents, I found I had to go the "Font Locations" dialog in Distiller and update the incorrect path to these private fonts. Why couldn't the FM 7.2 "New Features" PDF not say something like: "FM 7.2 comes with a set of high-quality OpenType fonts. They are loaded during application startup and are then available for use in your FrameMaker documents. You cannot use them in your Windows applications." However, now I know how to use these fonts, thankyou to Adobe for including them! Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Donald M Rinderknecht Sent: 19 May 2006 14:20 To: [EMAIL PROTECTED] Cc: framers@lists.frameusers.com Subject: Re: FM 7.2 starts much slower than 7.1 Klaus, My machine is similar in configuration to yours and Frame 7.2 loads in about 10 seconds. (7.1 is no longer on this machine.) In my case, "Fonts" also takes the longest time to load (about 7 seconds for a couple hundred fonts). Thanks, Don. Don Rinderknecht -- KD5MVV Meteorologist Instructor/Developer ~ Warning Decision Training Branch [EMAIL PROTECTED] ~ http://wdtb.noaa.gov Klaus Daube wrote: > Dear all, > > FM 7.2 starts very slow compared to 7.1 - what may be the reason? > > Machine: 3 GHz, 1GB RAM, drives C[System[ and H[Programs] are on an SATA 100 > disk > > OS XP SP2 with all automatic updates > > FM in both cases with Shlomo Perets' toolbar > > location H:\Adobe\framemaker.72en\FrameMaker.exe > >H:\adobe\FrameMaker.71en\FrameMaker.exe > > Starting FM 7.2b144 for the first time after Windows start > > 0 sec double click on framemaker.exe > > 7 splash sreen appears and immediately shows 'Fonts' > > 34 fonts are loaded and start sequnece continues > > (thats 27 seconds for font business) > > 40 FM Window appears, start of plugins etc. begins > > Further starts: > > 0 sec double click on framemaker.exe > > 5 FM Window appears, start of plugins etc. begins > > Starting FM 7.1p116 for the first time after Windows start > > 0 sec double click on framemaker.exe > > 10 FM Window appears > > Further starts: > > 0 sec double click on framemaker.exe > > 2 FM Window appears > > What may be the reason for the much more time consuming font handling in FM > 7.2? > > Klaus Daube > > > > Docu + Design Daube; Schäracher 11; CH-8053 Zürich > > Technical documentation & consultancy; On-line and paper > > Phone: +41-44-422 86 25 FAX: +41-44-422 82 78 > > E-mail: [EMAIL PROTECTED] Web: www.daube.ch/ >___ > > >You are currently subscribed to Framers as [EMAIL PROTECTED] > >Send list messages to [EMAIL PROTECTED] > >To unsubscribe send a blank email to >[EMAIL PROTECTED] >or visit >http://lists.frameusers.com/mailman/options/framers/donald.m.rinderknec >ht%40noaa.gov > >Send administrative questions to [EMAIL PROTECTED] Visit >http://www.frameusers.com/ for more resources and info. > > ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Improve speed and cut bank charges with OCRA from CODA. Click here for more... <http://www.coda.com/solutions/Products/Ocra_1.asp> __
RE: Entire FM Help available as a PDF
Also interesting that it was created in March 2002. Has it just been sitting on a shelf unused since then? Still, I'm very pleased to see it available now. Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Rickaby Sent: 08 June 2006 10:09 To: framers@FrameUsers.com; [EMAIL PROTECTED] Subject: Re: Entire FM Help available as a PDF At 17:10 -0400 7/6/06, Art Campbell wrote: >Most recent posts by Monica Valdez >On-line help is now available as a downloadable PDF - 01:46pm Jun 7, >2006 Pacific - All, > >After much cajoling and patience persistence, my contact at Adobe has >convinced the "powers that be" that it really would be helpful to many, >many FrameMaker users to have the entire on-line FrameMaker Help as a >downloadable PDF. Voila! > >http://www.adobe.com/products/framemaker/pdfs/framemaker_help.pdf Interesting to note that this document was created by 'Adobe Instructional Publishing' using FrameMaker 6 and Acrobat Distiller 5.0 for Mac ;-) Thanks for the link, Art: a fantastic resource. [Cross-posted to 'FrameMaker for OS X' as I know they'll find it useful too.] -- Steve ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Improve speed and cut bank charges with OCRA from CODA. Click here for more... <http://www.coda.com/solutions/Products/Ocra_1.asp> _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Speeding up FM 7.2 Startup
Hello Framers, I'm sure most users of Frame 7.2 will have noticed the extended program startup time, compared with Frame 7.0 and earlier versions. It seems that the cause of this is the wide range of private fonts installed with Frame 7.2. These are installed in fminit\fonts\adobe and appear to be loaded during program startup. As I do not use any of the private fonts, I tried removing some of these fonts and, hey presto, startup time is reduced to just a few seconds. For your information, I removed the following fonts: - Japanese (Heisei* and Koz*) - Chinese and Korean (AdobeMingStd, AdobeMyungjoStd-Medium and AdobeSongStd-Light) - Symbol (AdobePiStd and SymbolStd) I also removed the .lst file - a new one was automatically created when I started Frame. I left the Western fonts such as Garamond, Minion and Myriad as I may actually use these. I hope this is useful to some framers, Phil Heron Technical Writer - CODA Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Speeding up FM 7.2 Startup
I do use the Symbol font but it's the Microsoft TrueType one shipped with Windows. Consulting my archive, I see that Dov Isaacs sent a message to the list on 25/10/04 stating: "(3) Yes. Some peculiar interaction between the PostScript driver and Windows 2000 / XP / Server 2003 requires that Symbol TrueType font and it uses that font instead of the Type 1 font." I also removed the AdobePiStd font because it has no characters in the range available for use by FrameMaker. Phil Heron -Original Message- From: Steve Rickaby [mailto:[EMAIL PROTECTED] Sent: 21 June 2006 16:25 To: framers@FrameUsers.com Cc: Phil Heron Subject: Re: Speeding up FM 7.2 Startup At 15:20 +0100 21/6/06, Phil Heron wrote: >For your information, I removed the following fonts: >- Japanese (Heisei* and Koz*) >- Chinese and Korean (AdobeMingStd, AdobeMyungjoStd-Medium and >AdobeSongStd-Light) >- Symbol (AdobePiStd and SymbolStd) Phil - I seem to remember reading somewhere that FrameMaker malfunctions without the Symbol font. That might no longer be true in 7.2, of course. -- Steve Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Speeding up FM 7.2 Startup
Aargh! I've re-instated AdobeStd and AdobePiStd. In my message I also mentioned that I removed the AdobeFnt07.lst file. It seems that this is generated by Acrobat Distiller rather than FrameMaker. Apologies to anyone who has been fruitlessly searching for this file. Phil Heron Technical Writer - CODA -Original Message- From: Dov Isaacs [mailto:[EMAIL PROTECTED] Sent: 21 June 2006 17:26 To: Phil Heron; framers Subject: RE: Speeding up FM 7.2 Startup The AdobePiStd font is a substitution font for ITC Zapf Dingbats used by the PDF Library and by Acrobat when PDF files call for ITC Zapf Dingbats but do not have it installed. In the case of FrameMaker, it may be necessary when PDF files are imported into FrameMaker. It should NOT be removed as part of any expedient for faster FrameMaker loading. - Dov > -Original Message- > From: lists.frameusers.com On Behalf Of Phil Heron > Sent: Wednesday, June 21, 2006 8:36 AM > To: framers > Subject: RE: Speeding up FM 7.2 Startup > > I do use the Symbol font but it's the Microsoft TrueType one shipped > with Windows. > > Consulting my archive, I see that Dov Isaacs sent a message to the > list on 25/10/04 stating: > > "(3) Yes. Some peculiar interaction between the PostScript driver and > Windows 2000 / XP / Server 2003 requires that Symbol TrueType font and > it uses that font instead of the Type 1 font." > > I also removed the AdobePiStd font because it has no characters in the > range available for use by FrameMaker. > > Phil Heron > -Original Message- > From: Steve Rickaby [mailto:[EMAIL PROTECTED] > Sent: 21 June 2006 16:25 > To: framers@FrameUsers.com > Cc: Phil Heron > Subject: Re: Speeding up FM 7.2 Startup > > At 15:20 +0100 21/6/06, Phil Heron wrote: > > >For your information, I removed the following fonts: > >- Japanese (Heisei* and Koz*) > >- Chinese and Korean (AdobeMingStd, AdobeMyungjoStd-Medium and > >AdobeSongStd-Light) > >- Symbol (AdobePiStd and SymbolStd) > > Phil - I seem to remember reading somewhere that FrameMaker > malfunctions without the Symbol font. That might no longer be true in > 7.2, of course. > -- > Steve Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Problems with special characters
Mathieu, Alt+242 was the code for the "greater or equal than" symbol in the US MS-DOS codepage 437. This character is not available in the Windows Western European codepage (1252) or the matching MS-DOS codepage 850. The character is, however, available in the Symbol font. To use this character in FrameMaker: 1. Choose the Symbol font 2. Press Ctrl + q and then 3 OR type Alt + 0178 All the characters available with FrameMaker are listed in the online "Character Sets" manual. Phil Heron Technical Writer - CODA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of mathieu jacquet Sent: 05 July 2006 09:25 To: framers@lists.frameusers.com Subject: Problems with special characters Dear all, I have a tough time finding shortcuts for special characters. On the Internet, I found an Ascii table which specifies ALT + 242 for "greater or equal than" ; unfortunately, when I type that, an "equal" character appears. I modified the regional options on my computer (set to French at first) through the configuration panel but it did not change anything. I have the same problem for the "different than" character. Do you simply recommend using the Equation palette ? Any help appreciated. Mathieu ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: FM "cannot find file" message
I had a few problems with FM file associations recently when I removed my old FM7.0 version. I had both FM 7.0 and FM7.2 installed and double-clicking a FM file opened it in FM7.0. Once I removed FM7.0 I could no longer open my FM files from Explorer. To rectify this, I used the fmreg.txt file in the FrameMaker home directory to update the registry. You can open this file to see what it does and to read the instructions for using it. (In short, at a Windows command prompt, change to the FrameMaker program directory and type "FrameMaker -reg" (without the quotes). Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Wesley Simmons Sent: 17 July 2006 13:32 To: framers@frameusers.com; [EMAIL PROTECTED] Subject: FM "cannot find file" message Howdy, folks. I like to double-click on my FM files to open both the app and the file. That's just how I like to work. Last week I had a PC crash and had to rebuild my disk, load apps back on, etc. I'm running FM 7.1p114 on Win XP Pro. After getting my apps back on the hard drive, I now find that whenever I double-click on an FM file, even when FM is already open, I get a message like the following: Cannot find the file named Z:\Release. Make sure that the file exists. Now, Z is a mapped drive. The full path is \\rubble\tech pubs\Release Notes\Release-Notes-production\Release-Notes-7.2.1\filename. What appears in the Win Explorer address bar is Z:\Release Notes\Release-Notes-production\Release-Notes-7.2.1\filename. I know someone is going to say, "Eek! Spaces in directory names! How low-class can you be?" Yeah, fine, I'm low-class. The issue is that heretofore, this action has always worked. I have never before gotten this error message. I have always been able to double-click a file in just such a directory structure, and FM has opened it without complaint. I want it to do so again. Changing the directory structure to eliminate spaces in names is not an option. Any ideas why FM is now biffing this simple little task? And how I can make it go back to business as usual? thanks, bws ** To unsubscribe, send a message to [EMAIL PROTECTED] ** ** with "unsubscribe framers" (no quotes) in the body. ** Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: 7.2 message when you save
Caroline, It's in the Preferences dialog - File > Preferences > General. "Show warnings while clearing history". Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Caroline Tabach Sent: 20 July 2006 11:02 To: Framers Subject: 7.2 message when you save We have just installed Version 7.2 (on XP). Adobe seem to be so happy bout the multiple undos that every time we save a document there is a warning saying "Cannot be undone. Undo history will be lost. OK to ontinue?" Is there anyway that we can turn this (rather irritating) message off? Caroline Tabach MarCom RADCOM [EMAIL PROTECTED] ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Difference between us and international english Framemaker
Verner, I believe my copy of FramMaker is the International English one. When you install it you see a dialog asking you to choose between US English or International English. I guess you wouldn't see this dialog if you had a US-only version. Choosing International English installs A4 versions of the custom templates. I don't think there's any other difference. (One extra step I take after installing is to change the "Language" setting in maker.ini from USEnglish to UKEnglish - this sets UK English as the default language in the designers.) _____ Phil Heron CODA Group International Ltd Tel +44 (0)1423 50 __ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andersen, Verner Engell VEA Sent: 14 December 2006 07:21 To: Framers@FrameUsers.com Subject: Difference between us and international english Framemaker All Is there a difference between International and US Framemaker. My manager has bought the International version of FrameMaker for me. Our corporate language is US English. Verner Andersen Technical Writer Radiometer Medical ApS Åkandevej 21 ● 2700 Brønshøj ● Denmark Tel. +45 38 27 36 12 Mobile. + 45 60 62 27 90 E-mail: [EMAIL PROTECTED] Web: www.radiometer.com This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Configuring Paste
Zoë, Open the maker.ini file (in \Program Files\Adobe\FrameMaker7.2). Find this line: ClipboardFormatsPriorities=FILE, OLE 2, EMF, META, DIB, BMP, MIF, RTF, TEXT Change it to: ClipboardFormatsPriorities=TEXT, FILE, OLE 2, EMF, META, DIB, BMP, MIF, RTF Phil _ Phil Heron CODA Group International Ltd Tel +44 (0)1423 50 __ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Zoe Lawson Sent: 02 March 2007 15:35 To: framers@lists.frameusers.com Subject: Configuring Paste Greetings, Sometime ago, someone posted a lovely little trick where you can change something, somewhere and configure your paste settings. By default, if you copy something from Word and paste it into Frame, you get a Word object or something. I want to paste text. I edited a file somewhere, based off of suggestions from this list, and fixed it. Now I can't find the setting again. I'm having trouble finding my login for the FrameUsers site, so can't search the archives. If someone who remembers this setting would be so kind as to post it again, I'd really appreciate it. I'm now using FrameMaker 7.1p114, if that makes a difference. Thanks! Zoë Sucker-punch spam with award-winning protection. Try the free Yahoo! Mail Beta. http://advision.webevents.yahoo.com/mailbeta/features_spam.html ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Registry Settings
I think the value is stored in the ACP (ANSI code page) key under: HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Nls\CodePage My standard system has 1252 (Western European) and my Trad. Chinese system has 950 for this key. The character set used in the Command Prompt window is stored in the OEMCP key. Hope this helps! _ Phil Heron CODA Group International Ltd Tel +44 (0)1423 50 __ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick Quatro Sent: 23 April 2007 13:39 To: framers@lists.frameusers.com; [EMAIL PROTECTED] Subject: OT: Registry Settings Hello Framers, With Windows XP I am using Control Panel > Regional and Language Options. I click the Advanced tab and choose a language from the Language for non-Unicode programs menu. I need to know what key this is stored under in the registry. If someone can steer me in the right direction, I would appreciate it. Thanks. Rick Quatro Carmen Publishing 585-659-8267 www.frameexpert.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. Using spreadsheets for group consolidation and reporting? Report faster and eliminate spreadsheet errors with CODA's consolidation system, OCRA. Click here for more _ This e-mail has been sent by CODA plc or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA plc: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Omega symbol becomes W in pdf
Two things for you to check, Nancy: 1. Make sure you have the Windows Symbol font installed. This is used in some magic way by Distiller and it's abcense causes the sort of problem you are seeing. 2. In FrameMaker, check that your Symbol character tag uses the Windows "Symbol" font and NOT the "Symbol Std" font. Symbol Std is a private font installed by FrameMaker. HTH Phil Heron -Original Message- From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Nancy Allison Sent: 17 March 2009 21:46 To: framers at lists.frameusers.com Subject: Omega symbol becomes W in pdf My document uses some special symbols, like the Omega. To create it, I type W and then apply a Symbol character tag, which applies the Symbol font. I've created PDFs from this file in two ways: ---Used Framemaker's "Save as" feature. ---Printed to .ps file and opened it in Acrobat Distiller. In this case, I've deselected "Do not send fonts to printer." I believe this should assure that the Symbol font is sent to the printer. Either way, the Omega character is turned back into a W in the final PDF. This is also happening with the Symbol +/minus sign (the plus is directly over the minus) -- it is transformed into a plain minus sign. NOT GOOD. I'm sure this problem is as old as the hills, but I have Googled lots of phrases and have not found a good treatment of this subject. In the short term, I'm creating .gifs of the symbols and importing them into the text as graphics, but that is time-consuming and clumsy. All suggestions will be very welcome. --Nancy ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
Chinese Characters in User Variables
Hi Nate, You don't specify which version of FrameMaker you're using, but, at least for versions 7.2 and earlier, you need to set the operating system's language for non-Unicode programs to an appropriate value to successfully use Far Eastern languages in dialog boxes. 1. In Windows Control Panel, open the "Regional and Language Options" applet. 2. In the "Regional and Language Options" dialog, display the "Advanced" tab. 3. Select the language you want to work with, for example Chinese (PRC). 4. Restart the computer. If the language you want doesn't appear in the list you will need to add it using the "Languages" tab. This setting only applies to non-Unicode programs such as FrameMaker V7.2 and earlier. Hope this helps, Phil Heron -Original Message- From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Nate Stelton Sent: 20 May 2009 16:48 To: framers at lists.frameusers.com Subject: Chinese Characters in User Variables Ah, it's good to be back on Framers after a 15-or-so-year hiatus! My question: On an XP machine localized for CH, I'm trying to convert and translate a manual into Simplified Chinese. I'm doing fine with entering or pasting characters directly into the document, but am having no success with variables. In the edit variable window I can get a character in and displaying correctly, but as soon as I space over to do the next character, the previous one changes to a question mark. I hope there is just a simple setting or step I'm missing. Any suggestions? Thanks! Nate Stelton ___ You are currently subscribed to Framers as phil.heron at coda.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _ This e-mail has been sent by CODA Ltd or one of its subsidiaries (CODA GB Ltd or CODA Group International Ltd). The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. CODA Ltd: Registered in England 5861419 Registered Office: Methuen Park, Chippenham SN14 0GB CODA GB Ltd: Registered in England 3909530 Registered Office: Methuen Park, Chippenham SN14 0GB CODA Group International Ltd: Registered in England 3938996 Registered Office: Methuen Park, Chippenham SN14 0GB Please don't print this e-mail unless you really need to.
RE: default fonts in Framemaker 6
When you create a new document in FrameMaker, the paragraph and character formats etc are derived from the document used as the template for the new document. If you create a new document using the File > New menu option, FrameMaker bases the document on the file "custom" in the FrameMaker fminit directory. As this is a FrameMaker document you can open it and make changes to the paragraph formats and so on. Save it with the same name and FrameMaker will use it as the template for any future custom documents. This procedure is described in the Frame manual in the section "Changing templates for blank paper and text files", P293 for Frame 5.5, P326 for Frame 7 (I don't have Frame 6). It's probably also in the online help. I think you are mistaken about Distiller failing to produce press-quality PDF files if it finds any Truetype fonts. There have been many messages on this list from Dov Isaacs of Adobe about this very subject. Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of patrick scully Sent: 21 December 2005 16:35 To: framers@lists.frameusers.com Subject: default fonts in Framemaker 6 Dear Framemaker users, Is it possible to change the default font (currently Times New Roman) that Framemaker uses for paragraph, character, table formats etc? I have looked in maker.ini, but its font defaults relate ONLY to what font substitutions are made where a user doesn't have a particular font. I don't EVER want to use Times New Roman or any other Truetype font in a document that I prepare for commercial printing. Distiller fails to produce press-quality PDF files if it finds any Truetype fonts. And it can be very difficult to find exactly where the Truetype font is lurking in a Framemaker document. The only workaround I can see currently is to delete everything from the paragraph, character and table catalogs, and start from scratch. Thanks Patrick Scully, Director Rédacteurs Ltd, 165 Howth Road, Dublin 3 00 353 1 8330444 00 353 87 2362563 www.redact.ie * Economic & Technology Reports * Policies & Procedures * User Documentation * Information Mapping Training ___ You are currently subscribed to Framers as [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. CODA Wins 5th Accountancy Age Award in 5 Years For details visit www.coda.com/winners <http://www.coda.com/winners> The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: HTML character entities in XML files
Mark, In answer to your question about character entities in xml files, here are two solutions to your problem: 1. Easy solution: If you only want to use one or two character entities, add the definitions to your DTD. For a non-breaking space, add a line such as the following to your DTD: 2. More flexible solution To use entity definitions stored in a file with structured Frame you will need 3 things: 1. The file(s) storing the entity definitions. 2. A reference to the entity definitions in the DTD 3. A reference to the location of the entity definition file(s) in the strctured application definition document. Take a look at the example structured applications supplied with Frame to see how this works. Frame XHTML structured application - - The entity definitions are stored in 3 files in the structure\xml\xhtml\app directory. You can find in xhtml-lat1.ent. - The entity definitions are referenced in the DTD (called "dtd" in this case). - Entity locations are specified in structapps.fm in the "Entity locations" element. Frame xDocBook structured application - - The entity definitions are stored in the .ent files in the structure\xml\isoents directory. You can find in iso-num.ent. - The entity definitions are referenced in the DocBook XML Character Entities module of the DTD (in the file called "dbcentx.mod" in this case). - Entity locations are specified in structapps.fm in the "Entity locations" element. NB: If you want to open xml files based on the Frame XHTML or xDocBook DTDs in an xml editor such as XMetaL, you need to specify the entity file locations in the DTD. Hope this is not too incomprehensible, Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Barratt Sent: 09 January 2006 11:15 To: [EMAIL PROTECTED]; Free Framers Subject: HTML character entities in XML files I have a contributor who sends me XML files containing HTML character entities - particularly , but also some others. (it's a byproduct of his editing software) These are not recognised by my XML Frame application. I have #include "isoall.rw" in my rules file, but note that nbsp isn't among the entities in any of the iso files. Ideas on the simplest/cleanest way to deal with this? -- Mark Barratt Text Matters Information design: we help explain things using language | design | systems | process improvement __ phone +44 (0)118 986 8313 email [EMAIL PROTECTED] web http://www.textmatters.com ** To unsubscribe, send a message to [EMAIL PROTECTED] ** ** with "unsubscribe framers" (no quotes) in the body. ** CODA Wins 5th Accountancy Age Award in 5 Years For details visit www.coda.com/winners <http://www.coda.com/winners> The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Copying Text Box Crashes Frame
I can do this without any problem. Does the problem occur when you create a brand-new document or is it specific to a particular document? I have Frame 7.2 running on Windows XP. What is your environment? Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Katy Wegner Sent: 02 March 2006 19:38 To: framers@lists.frameusers.com Subject: Copying Text Box Crashes Frame FrameMaker 7.0 and now 7.2 When I draw a text box using the tools palette and try to copy it (select the box and click Ctrl C), I get the dreaded Internal Error: 7204, #, ## and FrameMaker shuts down. I was hoping this might get fixed. Does anyone know anything about this? ( just looked through Adobe Forums and FAQs and didn't see it). Thanks, Katy <http://www.lefthandnetworks.com/> <http://www.lefthandnetworks.com/images/email/email_rt.gif> <http://www.lefthandnetworks.com/images/email/clear.gif> Katy Wegner Senior Technical Writer Main: 303.449.4100 Direct: 303.217.9028 Fax: 303.442.0965 [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> www.lefthandnetworks.com <http://www.lefthandnetworks.com/> ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: FrameMaker 6 and Distiller font embedding problem
Here are my answers to these questions: 1. Font licensing Purchasing a font does not necessarily entitle you to embed the font in a PDF file. It depends on the restrictions the font designer has specified for the font. If you have the Microsoft Opentype font properties extension (available from the Microsoft Typography web site www.microsoft.com/truetype), you can inspect the "Embeddability" of the font. If it is set to "Restricted licence embedding" then Acrobat Distiller will not embed it in the PDF file. 2. Acrobat Distiller was the name of the distillation port created by Acrobat up to V5. With V6 the name of the port changed to "Adobe PDF" but it still performs the same function. Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Rickaby Sent: 06 March 2006 11:32 To: framers@FrameUsers.com Subject: FrameMaker 6 and Distiller font embedding problem On behalf of someone on another group... At 11:23 + 6/3/06, [EMAIL PROTECTED] wrote: >I wonder if anyone can help me regarding font problems with FrameMaker >6.0 and Actobat/Distiller 6.0. > >I have had a problem when distilling a FM file. Distiller cannot embed >a font because of licensing restrictions. We have purchased this font >so it's a mystery why I get this error. I am able to create the PDF >which looks OK on my PC as I have the font but on other PCs Acrobat uses a substitute font. > >We decided to reinstall FM. I used the FM disk to install Acrobat and >Distiller but these are earlier versions so I upgraded to Acrobat >Professional 6.0. > >Unfortunately FM doesn't offer Distiller as a printer option now. I use >Adobe PDF instead to create the PS file and then use Distiller to >create the PDF but I still have the font licence problem. I can live >with not having Distiller as a printer option but I really need to sort >out the font problem. > >Any ideas? -- Steve ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Polish in FrameMaker
Yves, I've tried this out on my system. Here's what I did to copy Polish text from Word to FrameMaker: 1. I defined a FrameMaker paragraph format to use the Arial CE font. 2. I typed some text using Polish characters in a Word document. 3. I selected the text in Word and used Ctrl+C to copy it to the clipboard. 4. In FrameMaker, I put the insertion point into the paragraph formatted with the Arial CE font. 5. I chose Paste Special from the Frame Edit menu and selected RTF as the paste format. Bingo - the Polish characters displayed as expected. You could move RTF to the beginning of the ClipboardFormatsPriorities line in maker.ini. This will allow you to use regular Paste to put the Polish text in. I can also switch to the Polish keyboard and type Polish text directly into Frame. I didn't need to customise maker.ini or use WGL Assistant to activate Arial CE. My environment: Windows XP Professional (UK English default locale) Word XP FrameMaker 7.2 (144) Acrobat 6 Professional Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yves Barbion Sent: 07 March 2006 15:56 To: framers@lists.frameusers.com Subject: Polish in FrameMaker Hello Framers, here we go again with the old "FrameMaker does not support Unicode" story. A customer of mine has FrameMaker files which already contain Polish text. He has now received some new Polish text in Word which he has to copy and paste in the FrameMaker files. The known problem is that the characters are okay in Word (because Word supports Unicode), but the special (Polish) characters become question marks when you paste the text in FrameMaker. The maker.ini file has been customized and Arial CE has been activated using WGL Assistant. Any ideas? Thanks in advance. Best regards -- Yves Barbion Technical Writer Adobe-Certified FrameMaker Instructor U&I Learning NV (formerly ATeK NV) Molenaarsstraat 111 B-9000 Gent Belgium Tel.: +32 9 265 74 72 Fax: +32 9 265 74 84 www.uni-learning.com The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: FrameMaker ROI: Finding Real Examples
You could take a look at the Adobe FrameMaker Customer Stories web page http://www.adobe.com/products/framemaker/customerstories.html. This has case studies of quite a few Frame customers. Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Abel Sent: 08 March 2006 12:20 To: brad Subject: FrameMaker ROI: Finding Real Examples Help Framers! Anyone know of any online resources (articles, etc.) that might help me paint a picture of the ROI possible when moving from unstructured FrameMaker to Structured FrameMaker XML authoring? I need to be able able to reference a real organization by name. Thanks in advance. The Content Wrangler, Inc. Scott Abel, Content Management Strategist 3421 Crystal Lakes Ct., Sarasota FL 34235 [EMAIL PROTECTED] 941-359-3416 www.thecontentwrangler.com Via Skype: abelsp TheContentWrangler.com - Look there first! ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Unbelievable On-Line Help Stupidity
I am on Windows XP Professional. The instructions you list ("Click Start, click Shut Down, and then in the drop-down list click Shut Down") are perfectly correct for my computer. That is exactly what I see. ?? Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Daniel Emory Sent: 10 March 2006 16:56 To: Framers List Cc: Free Framers List Subject: OT: Unbelievable On-Line Help Stupidity I was helping a friend who'd just acquired her first computer, an E-Machine with Windows XP. I was demonstrating how to get help, and showed how she could type in a search phrase and get a list of all the help topics containing that phrase. So, to demonstrate how to properly shut down the computer, I entered the search phrase "Turn Off." Sure enough, all the help topics containing that phrase appeared, and I selected the"Turn Off The Computer" topic. Here are the instructions which appeared under that topic: "Click Start, click Shut Down, and then in the drop-down list click Shut Down" The only part of that instruction which is correct is "Click Start." o There is no Shut Down option under Start. It's called "Turn Off Computer." o There is no drop-down list under the "Turn Off Computer" dialog. Instead, there are 3 buttons. o There is no button option under "Turn Off Computer" called "Shut Down" Instead there are three button options: "Stand By", "Turn Off", and "Restart." Dan Emory & Associates FrameMaker/FrameMaker+SGML Document Design & Database Publishing <[EMAIL PROTECTED]> ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Unbelievable On-Line Help Stupidity
That's easy enough to change. There's a setting on the Advanced tab of the User Accounts dialog to specify whether users have to use Ctrl+Alt+Delete to log on. Phil Heron -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gagne, Bernard (Bolton) Sent: 10 March 2006 17:11 To: Framers List Cc: Free Framers List Subject: RE: Unbelievable On-Line Help Stupidity Personally, I find the whole idea of clicking "Start" to shutdown somewhat counter-intuitive, and could somebody tell me why I have to use the "three-finger salute" to get my login screen in XP Pro? Once I power up, what else could I possibly want to do with my computer? It should automatically default to the login screen. Just my two-cents' (Canadian) worth. Berny Gagné Sr. Technical Writer Husky Injection Molding Systems Bolton, Ontario, Canada -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Grant Hogarth Sent: Friday, March 10, 2006 12:00 PM To: Framers List Cc: Free Framers List Subject: RE: Unbelievable On-Line Help Stupidity Versionitis strikes again! A rigorous (and repeated) application of QA is the only known pallative -- there is no cure. Grant -Original Message- From: Daniel Emory Sent: Friday, March 10, 2006 9:56 AM To: Framers List Cc: Free Framers List Subject: OT: Unbelievable On-Line Help Stupidity I was helping a friend who'd just acquired her first computer, an E-Machine with Windows XP. I was demonstrating how to get help, and showed how she could type in a search phrase and get a list of all the help topics containing that phrase. So, to demonstrate how to properly shut down the computer, I entered the search phrase "Turn Off." Sure enough, all the help topics containing that phrase appeared, and I selected the"Turn Off The Computer" topic. Here are the instructions which appeared under that topic: "Click Start, click Shut Down, and then in the drop-down list click Shut Down" The only part of that instruction which is correct is "Click Start." o There is no Shut Down option under Start. It's called "Turn Off Computer." o There is no drop-down list under the "Turn Off Computer" dialog. Instead, there are 3 buttons. o There is no button option under "Turn Off Computer" called "Shut Down" Instead there are three button options: "Stand By", "Turn Off", and "Restart." Dan Emory & Associates <[EMAIL PROTECTED]> FrameMaker/FrameMaker+SGML Document Design & Database Publishing ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Chinese-language FM documents
To display the level of support for Asian languages in Frame, choose File > Preferences > General and then click the "Asian Language Features" button. If you are running Frame in a Western environment (for example US English) a message will tell you that you can display Asian text (assuming you have the right fonts installed) but that most Asian language features are disabled. To enable full support for Asian languages (using a Western version of XP), start from the Windows XP Regional and Language Options control panel. - First choose the "Languages" tab. Tick the check box "Install files for East Asian languages". This will cause the necessary support files (fonts, IMEs etc) for Chinese, Japanese etc to be installed. You will probably have to re-start after doing this. - Next choose the Advanced tab from the Regional and Language Options control panel and you will see a box titled "Language for non-Unicode programs". If you are in the US this will probably be US English. Change the language here to the one you want to use in Frame - most likely this will be Simplified Chinese so you should choose Chinese (PRC). You will probably have to re-start again after doing this. Now display Frame's language support again and this time you should be informed that all Asian language features are now supported. If your Chinese speaker is familiar with using Windows to enter Chinese text, they should find that they can now choose their preferred keyboard and enter Chinese text into Windows applications (including Frame) using their normal techniques. If you want more information about using Asian keybards (IMEs) you might want to look at the following Microsoft site: http://www.microsoft.com/globaldev/handson/user/IME_Paper.mspx Hope this is of some help to you, Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: 14 March 2006 00:03 To: framers@lists.frameusers.com Subject: Chinese-language FM documents Hi Framers, I need to edit a book of Chinese-language files (with the help of a Chinese speaker who doesn't know FM). I can read the files in FM 7 running under an English-language version of XP. I can even do some minor editing. But I can't do much with dialogs. I believe that FM 7 can run on a Chinese-language Windows OS with all the functionality it has when running on an English OS. Can someone confirm that that is the case? If FM 7 can run on, say, Chinese-language Windows XP, how does one enter Chinese characters? The online manuals that come with FM 7 say that you need to use a "front-end processor (FEP), which is also known as an Input Method Editor (IME)". What sort of beast is that? And how do you find one? Finally, are there any pitfalls the novice needs to be aware of? (In particular, I need to enter index markers and generate a TOC and index, as well as some minor text edits.) Thanks Geoffrey Marnell___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
FrameMaker at Adobe Day
Hello list members, I'm going to the [EMAIL PROTECTED] day next week (at Adobe UK). Are any other list members going? Phil Heron Technical Writer - CODA www.coda.com The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Help with PDF problem and 11x17 page size
Carla, I think you should be able to create a PDF document containing a mixture of page sizes. I tried this and it worked first time: - Create three Frame files, one portrait, one landscape and one a custom size. - Create a Frame book containing the three files. - Print the book to a file, using the Adobe PDF printer and ticking the "Generate Acrobat Data" box. - Open the generated PS file with Acrobat Distiller. Success! A PDF file is created contining a combination of page sizes. In short: Make sure you are printing to the Adobe PDF printer. Make sure you set "Generate Acrobat Data" Hope this helps, Phil Heron Technical Writer - CODA www.coda.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Carla Drye Sent: 17 March 2006 16:06 To: framers@lists.frameusers.com Subject: Help with PDF problem and 11x17 page size I'm new so please be kind. I work in Frame 7.1b023 with no plug-ins. I have a book file that incorporates multiple 8-1/2 x 11 page size files, multiple 11 x 17 page size files with cross references within files and from file to file, stand alone TOCs, LOFs, and LOTs that are generated and then copied and pasted into the front of the files. The book is then PDF'd with create hyperlinks turned on. The PDF works great and all the cross references for the TOC, LOF, LOT, from Frame work in the PDF. The problem is that the 11 x 17 pages (which are figures) end up on 8-1/2 x 11 pages in the book PDF. What I have been doing is going into each of the 11 x 17 files (9 total), and saving each as a stand-alone 11 x 17 PDF. Then I exchange each new 11 x 17 PDF for the old 8-1/2 x 11 page in the book PDF file. This works for getting the correct page size, but the link from the LOF (which is not on the 11 x 17 page) does not work. Does anyone have a suggestion on how to make the links work to the 11 x 17 pages? Thanks Carla J.H. Drye, Associate Writer [EMAIL PROTECTED] S&K Technologies ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/phil.heron%40coda.co m Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. The information in this message is confidential and may be legally privileged. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message in error, please advise us immediately. Internet emails are not necessarily secure. CODA does not accept responsibility for changes to any email which occur after the email has been sent. Attachments to this email may contain software viruses, which could damage your systems. CODA has checked the attachments for viruses before sending, but you should virus-check them before opening. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.