Re: [IVI] Tizen IVI for PC ( Failed to get Wayland terminal on Laptop)
From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Bhushan Dhadway Sent: Tuesday, August 25, 2015 7:38 AM To: ivi@lists.tizen.org Subject: [IVI] Tizen IVI for PC ( Failed to get Wayland terminal on Laptop) Hi, I tried to create live usb for Tizen IVI and tried to boot on my Dell laptop, but it failed to show the wayland terminal. [Geoffroy] Where exactly does it stop? What is the graphics card in your Dell latpop? If i boot on my desktop PC it shows the wayland terminal. I tried to change output/name/mode for various combination in the /etc/xdg/weston-user.ini file but it didn't worked? Could you please suggest what might be the issue? Thanks Regards, Bhushan D ~~Disclaimer~~~ Information contained and transmitted by this e-mail is confidential and proprietary to IGATE and its affiliates and is intended for use only by the recipient. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator or mailad...@igate.commailto:mailad...@igate.com. IGATE does not enter into any agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of IGATE. IGATE is not responsible for the consequences of any actions taken on the basis of information provided, through this email. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While IGATE has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening an attachment. To know more about IGATE please visit www.igate.comhttp://www.igate.com. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: [IVI] [Dev] Video Media Playback in Web Application
Hi Joel, These links are from the Tizen Native Programming environment which is not supported in IVI. Kevron’s response is spot on, the way to get this to work is to enable additional codecs for Crosswalk (specifically the ones that need EULA set to 1). Geoffroy Technical Marketing Engineer Manager Open-Source Technology Centre Tel: +32 (0)3 450 0851 --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: Dev [mailto:dev-boun...@lists.tizen.org] On Behalf Of Mertz, Joel Sent: Thursday, April 16, 2015 6:41 PM To: McGee, Art Cc: ivi@lists.tizen.org; um-pd-engineering-electrical-infotainment-...@jaguarlandrover.com; genivi-...@mail.genivi.org; d...@lists.tizen.org Subject: Re: [Dev] Video Media Playback in Web Application The popular H.264 codec (.mp4) is supported by Tizen: Supported Multimedia Formatshttps://developer.tizen.org/dev-guide/2.2.0/org.tizen.native.appprogramming/html/guide/media/support_multimedia_format.htm I think the Tizen::Media::Player classhttps://developer.tizen.org/dev-guide/2.2.0/org.tizen.native.apireference/classTizen_1_1Media_1_1Player.html (is this an extension?) needs to be included in order to enable the functionality however. Joel Mertz Graphics Developer jme...@jaguarlandrover.commailto:jme...@jaguarlandrover.com Jaguar Land Rover North America, LLC 1419 NW 14th Ave, Portland, OR 97209 JaguarUSA.comhttp://www.jaguarusa.com/index.html | LandRoverUSA.comhttp://www.landrover.com/us/en/lr/ On Thu, Apr 16, 2015 at 8:09 AM, McGee, Art amcg...@jaguarlandrover.commailto:amcg...@jaguarlandrover.com wrote: I was thinking of using https://ffmpeg.org/ we need to capture a segment of video for sharing on social media. I will need to build the package for Tizen. Thanks, On 15 April 2015 at 20:30, Rees, Kevron kevron.m.r...@intel.commailto:kevron.m.r...@intel.com wrote: There is a way, but it involves recompiling gstreamer-plugins-* (good, bad and ugly) and enabling the codecs that have been disabled because of IP/licensing restrictions. On Wed, Apr 15, 2015 at 2:44 PM, McGee, Art amcg...@jaguarlandrover.commailto:amcg...@jaguarlandrover.com wrote: I am using the html5 video tag. Thanks, On 15 April 2015 at 14:41, McGee, Art amcg...@jaguarlandrover.commailto:amcg...@jaguarlandrover.com wrote: I am able to get video to playback in the ogg video file format but none others it seems. I'd like to play other formats. Is there a way to add codecs to the filesystem so that others will play? I'd like to add mov and mp4 playback to the system. Thanks in advance for your assistance. -- Art McGee Infotainment Engineer [http://www.jaguarlandrover.com/email/jlr.jpg] Jaguar Land Rover North America, LLC 1419 NW 14th Ave, Portland, Oregon, 97209 JaguarUSA.comhttp://www.jaguarusa.com/index.html | LandRoverUSA.comhttp://www.landrover.com/us/en/lr/ -- Art McGee Infotainment Engineer [http://www.jaguarlandrover.com/email/jlr.jpg] Jaguar Land Rover North America, LLC 1419 NW 14th Ave, Portland, Oregon, 97209 JaguarUSA.comhttp://www.jaguarusa.com/index.html | LandRoverUSA.comhttp://www.landrover.com/us/en/lr/ ___ Dev mailing list d...@lists.tizen.orgmailto:d...@lists.tizen.org https://lists.tizen.org/listinfo/dev -- Art McGee Infotainment Engineer [http://www.jaguarlandrover.com/email/jlr.jpg] Jaguar Land Rover North America, LLC 1419 NW 14th Ave, Portland, Oregon, 97209 JaguarUSA.comhttp://www.jaguarusa.com/index.html | LandRoverUSA.comhttp://www.landrover.com/us/en/lr/ ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: [IVI] Can not enable wifi on IVT1100
--- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of RayBloodworth Sent: Friday, March 20, 2015 2:17 AM To: Rees, Kevron M Cc: ivi@lists.tizen.org Subject: Re: [IVI] Can not enable wifi on IVT1100 Thanks for your reply! What wlan/bt chip is it? What does dmesg say when you plug in the wifi device? RT3090, It's not a hot plug device, I plugged it into the slot on mainboard before system boot up. Do you have any ideas? You'll need to add the driver for this. I don't know if there is an upstream driver you could simply enable in the kernel or if you'll need to get it from some other source and compile it... but the lack of driver is why it is not showing up in ConnMan. Date: Thu, 19 Mar 2015 08:42:53 -0700 Subject: Re: [IVI] Can not enable wifi on IVT1100 From: kevron.m.r...@intel.commailto:kevron.m.r...@intel.com To: k870818...@outlook.commailto:k870818...@outlook.com CC: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org What wlan/bt chip is it? What does dmesg say when you plug in the wifi device? On Thu, Mar 19, 2015 at 5:08 AM, RayBloodworth k870818...@outlook.commailto:k870818...@outlook.com wrote: Hi, everyone For using wifi/bt with IVT1100, I plugged a wlan/bt chip in IVT1100. But I can not enable wifi with connmanctl. #connmanctl enable wifi Error wifi:Method SetProperty with signature sv on interface net.connman.Technology doesn;t exist Also, there's no wifi technology with this command: #connmanctl connmanctl techonologies /net/connman/technology/bluetooth Could anyone help me? BR, Ray ___ IVI mailing list IVI@lists.tizen.orgmailto:IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: [IVI] Tizen IVI-3.0 Image Boot Problem
The other thing to possibly watch out for is whether this is a 32-bit EFI bootloader you currently have on the VTC-1010. In general, you need a 64-bit EFI bootloader to boot a 64-bit image (which is what you are trying to do). In the case of MinnowboardMAX, they provide 2 different firmware (a 32-bit one and a 64-bit one), I’m not sure what the situation is for the VTC-1010 (I’ve only tried to load 32-bit Tizen IVI images so far). Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Michael Johnson Sent: Wednesday, February 04, 2015 8:34 PM To: Hofemeier, Ulf; Bugra Cakir; ivi@lists.tizen.org Subject: Re: [IVI] Tizen IVI-3.0 Image Boot Problem If you have a gpt partition table, you might have to use gdisk from a terminal to set the attributes on the boot partition. for example: gdisk /dev/sda x (expert) a (attributes) select partition 1 and then make it bootable. I also relocate the backup to the end of the disk. Hope that helps. MICHAEL JOHNSON Embedded Software Engineer Tel. +441962868866 | Winchester, United Kingdom | Twitterhttps://twitter.com/symphony_teleca [www.symphonyteleca.com]http://www.symphonyteleca.com Teleca Limited, a company registered in England Wales, registration number 2773878, registered office at Sunley House, 46 Jewry Street, Winchester, Hampshire SO23 8RY. VAT registration number GB 674 6583 90 Please consider the environment before you print. Notice to recipient: This e-mail (including any attachments) is meant for the intended recipient only, may contain confidential and proprietary information, and is protected by law. If you received this e-mail in error, please immediately notify the sender of the error by return e-mail, delete this communication and any attachments, and shred any printouts. Unauthorized review, use, dissemination, distribution, copying or taking of any action based on this communication is strictly prohibited. From: IVI [ivi-boun...@lists.tizen.org] on behalf of Hofemeier, Ulf [ulf.hofeme...@intel.com] Sent: 04 February 2015 7:21 PM To: Bugra Cakir; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: Re: [IVI] Tizen IVI-3.0 Image Boot Problem Please try to decompress the bzip2 image to stdout using bzcat –dc image.bz2 | dd of=/dev/sda. Thanks, Ulf From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Bugra Cakir Sent: Wednesday, February 04, 2015 11:18 AM To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: [IVI] Tizen IVI-3.0 Image Boot Problem Hi, My hardware platform and version are like this; Nexcom VTC 1010 Bios Firmware MV11A119.rom Tizen IVI Image : tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2http://download.tizen.org/releases/milestone/tizen/ivi-3.0/tizen-3.0-ivi_20150201.3/images/atom64/ivi-efi-x86_64/tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2 I boot the system with a USB stick with SysrescueLinux. Also I copied the Tizen IVI-3.0 image to USB stick. I successfully write the Tizen IVI-3.0 image to the harddrive on this hardware platform with this command # bzcat tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2http://download.tizen.org/releases/milestone/tizen/ivi-3.0/tizen-3.0-ivi_20150201.3/images/atom64/ivi-efi-x86_64/tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2 | dd of=/dev/sda bs=512k oflag=sync conv=sparse After that I sync the filesystem and list the available partitions on the harddrive with fdisk -l command. it shows that there are two partitions on it. /dev/sda1 EFI /dev/sda2 Microsoft ... When I reboot the system and set the default boot to the harddrive, the system cannot boot from the Tizen IVI image partition I've created before. What can be the problem behind this ? Best, Bugra ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: [IVI] tizen-distro : memory allocation error whenlinkingcrosswalk
Hi Olivier, We typically test our images on Baytrail-I (Intel GPU) systems such as the Nexcom VTC-1010 (or the MinnowboardMAX) although other systems (e.g. NUCs) are known to work. VMware works with some limitations. I’m not convinced at this stage it’s an issue with your combination of graphics driver/stack as we see it too on our reference hardware. I _believe_ you can still use ssh with the following credentials: user: root, password: tizen Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: Olivier Delbeke [mailto:olivier.delb...@awtce.be] Sent: Thursday, January 29, 2015 12:27 PM To: VanCutsem, Geoffroy Cc: ivi@lists.tizen.org Subject: RE: [IVI] tizen-distro : memory allocation error whenlinkingcrosswalk Hi Geoffroy, As the image does not work on my PC, I tried on VMWare. There, the result is much better : kernel starts, many systemd targets are started (2 of them fails but I can't read fast enough to tell which ones), finally, the window size changes and the screen becomes completely black. I assume that it means that Wayland is started. I tried with and without 3D acceleration and got the same result. If I knew the SSH username/password, I could probably gather some more info. What is it ? More generally, which hardware is supported ? My laptop and VMWare don't seem to work. So what should I use ? Best regards, [cid:image001.jpg@01D03BDA.D72DB2B0] Olivier Delbeke Senior Software Engineer olivier.delb...@awtce.bemailto:olivier.delb...@awtce.be / T. +32 2 389 25 53 AWTC Europe S.A. - Avenue de l’Industrie, 19 - 1420 Braine-l’Alleud - Belgium - www.aweurope.euhttp://www.aweurope.eu - www.aisin-aw.co.jphttp://www.aisin-aw.co.jp VAT : BE 0474.474.114 - RPM Nivelles [Inactive hide details for VanCutsem, Geoffroy ---01/28/2015 06:35:53 PM---VanCutsem, Geoffroy geoffroy.vancut...@intel.com]VanCutsem, Geoffroy ---01/28/2015 06:35:53 PM---VanCutsem, Geoffroy geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com VanCutsem, Geoffroy geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com 01/28/2015 06:35 PM To Olivier Delbeke olivier.delb...@awtce.bemailto:olivier.delb...@awtce.be, ivi@lists.tizen.orgmailto:ivi@lists.tizen.org ivi@lists.tizen.orgmailto:ivi@lists.tizen.org cc Subject RE: [IVI] tizen-distro : memory allocation error when linkingcrosswalk Hi Olivier, Good to hear that you’re past that hurdle. Can you confirm what hardware you’re building this for? There was a similar issue reported on the tizen-dev mailing list earlier this month, see: https://lists.tizen.org/pipermail/dev/2015-January/005964.html. Is this consistent with what you are seeing? Thanks, Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Olivier Delbeke Sent: Wednesday, January 28, 2015 5:24 PM To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: Re: [IVI] tizen-distro : memory allocation error when linkingcrosswalk Dear all, FYI, and as expected, the compilation of crosswalk succeeds when run on a 64-bit OS (an not on a 32-bit OS). Thank you. But now, I have some trouble to start it (the Modello image). - the kernel starts - systemd starts - systemd fails to start Avahi, the av system and Install Modello applications - the system remains in text mode, with many error messages I guess that the Failed to start the av system means that the kernel is compiled without support for my graphics card or something like that. Right ? Best regards, [cid:image001.jpg@01D03BDA.D72DB2B0] Olivier Delbeke Senior Software Engineer olivier.delb...@awtce.bemailto:olivier.delb...@awtce.be / T. +32 2 389 25 53 AWTC Europe S.A. - Avenue de l’Industrie, 19 - 1420 Braine-l’Alleud - Belgium - www.aweurope.euhttp://www.aweurope.eu/ - www.aisin-aw.co.jphttp://www.aisin-aw.co.jp/ VAT : BE 0474.474.114 - RPM Nivelles [Inactive hide details for Patrick Ohly ---01/21/2015 09:54:06 AM---Patrick Ohly patrick.o...@intel.com]Patrick Ohly ---01/21/2015 09:54:06 AM---Patrick Ohly patrick.o...@intel.commailto:patrick.o...@intel.com Patrick Ohly patrick.o...@intel.commailto:patrick.o...@intel.com 01/21/2015 09:54 AM To Olivier Delbeke olivier.delb...@awtce.bemailto:olivier.delb...@awtce.be cc VanCutsem, Geoffroy geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com, ivi@lists.tizen.orgmailto:ivi@lists.tizen.org ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject Re: [IVI] tizen-distro : memory allocation error when linkingcrosswalk On Wed, 2015-01-21 at 08:18 +0100, Olivier Delbeke wrote: I get the same memory
Re: [IVI] Video streaming in Crosswalk
Hi, That link points at a a Native API which we don’t support in IVI. You will find all Web APIs supported in IVI documented here: https://developer.tizen.org/profiles/vehicle-infotainment/developing-tizen-ivi/web-api-references You can also take a look at our Modello Multimedia player if you don’t want to start from scratch, although I don’t believe it supports RTSP specifically. The sources of the Modello Multimedia player are available here: https://review.tizen.org/git/?p=profile/ivi/Modello_Multimediaplayer.git;a=summary Thanks, Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of ?? ??? Sent: Thursday, January 29, 2015 2:37 PM To: ivi@lists.tizen.org Cc: You, Le Subject: [IVI] Video streaming in Crosswalk Hi. I make in Tizen IVI Crosswalk environment Mediaplayer application. My task is to play video in streaming format RTSP::// . I am found this page https://developer.tizen.org/dev-guide/2.2.0/org.tizen.native.apireference/classTizen_1_1Media_1_1Player.html . Could i use this API for my web application ? Application on Crosswalk -- Best regads ,Руслан Кузьмин ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: [IVI] My daemon process will be killed in one minute
Can you provide a bit more details on your environment? What IVI image are you using? Do you have a log showing why/what/how your process was killed? Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of ? Sent: Wednesday, January 28, 2015 4:20 AM To: ivi@lists.tizen.org Subject: [IVI] My daemon process will be killed in one minute I am using systemd to launch my daemon process, it can be work. But in about 1 minute,my daemon process will be killed. I lanuch the process using ./,it can remain till the time I kill it. I don not know the reason. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: [IVI] tizen-distro : memory allocation error when linkingcrosswalk
Hi Olivier, Good to hear that you’re past that hurdle. Can you confirm what hardware you’re building this for? There was a similar issue reported on the tizen-dev mailing list earlier this month, see: https://lists.tizen.org/pipermail/dev/2015-January/005964.html. Is this consistent with what you are seeing? Thanks, Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Olivier Delbeke Sent: Wednesday, January 28, 2015 5:24 PM To: ivi@lists.tizen.org Subject: Re: [IVI] tizen-distro : memory allocation error when linkingcrosswalk Dear all, FYI, and as expected, the compilation of crosswalk succeeds when run on a 64-bit OS (an not on a 32-bit OS). Thank you. But now, I have some trouble to start it (the Modello image). - the kernel starts - systemd starts - systemd fails to start Avahi, the av system and Install Modello applications - the system remains in text mode, with many error messages I guess that the Failed to start the av system means that the kernel is compiled without support for my graphics card or something like that. Right ? Best regards, [cid:image001.jpg@01D03B29.2C428800] Olivier Delbeke Senior Software Engineer olivier.delb...@awtce.bemailto:olivier.delb...@awtce.be / T. +32 2 389 25 53 AWTC Europe S.A. - Avenue de l’Industrie, 19 - 1420 Braine-l’Alleud - Belgium - www.aweurope.euhttp://www.aweurope.eu - www.aisin-aw.co.jphttp://www.aisin-aw.co.jp VAT : BE 0474.474.114 - RPM Nivelles [Inactive hide details for Patrick Ohly ---01/21/2015 09:54:06 AM---Patrick Ohly patrick.o...@intel.com]Patrick Ohly ---01/21/2015 09:54:06 AM---Patrick Ohly patrick.o...@intel.commailto:patrick.o...@intel.com Patrick Ohly patrick.o...@intel.commailto:patrick.o...@intel.com 01/21/2015 09:54 AM To Olivier Delbeke olivier.delb...@awtce.bemailto:olivier.delb...@awtce.be cc VanCutsem, Geoffroy geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com, ivi@lists.tizen.orgmailto:ivi@lists.tizen.org ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject Re: [IVI] tizen-distro : memory allocation error when linkingcrosswalk On Wed, 2015-01-21 at 08:18 +0100, Olivier Delbeke wrote: I get the same memory allocation error on another machine with 12 GB of RAM and 9 GB of swap. Both machines are running a 32-bit Ubuntu 14.04. Maybe this is what causes the issue with the 64-bit build. Quite likely. On a 32 bit host, one single process cannot mmap more than 4GB (actually, less in practice). That's probably the reason for the mmap: failed to allocate 1810592752 bytes for output file error. Why do you install 12GB of RAM in a machine running a 32 bit OS? I think it does get used via tricks, but a 64 bit OS would be better. -- Best Regards, Patrick Ohly The content of this message is my personal opinion only and although I am an employee of Intel, the statements I make here in no way represent Intel's position on the issue, nor am I authorized to speak on behalf of Intel on this matter. This mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient, please note that any review, dissemination, disclosure, alteration, printing, copying or transmission of this mail and/or any file transmitted with it, is strictly prohibited and may be unlawful. If you have received this mail by mistake, please immediately notify the sender as well as our mail administrator at postmas...@aweurope.bemailto:postmas...@aweurope.be, and permanently destroy the original as well as any copy thereof. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: [IVI] receiving signal very late from phoned
Hi Ray, Were you able to determine if what is delayed is the message from oFono to phoned or from phoned to the Phone Web app? Thanks, Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Ray·Bloodworth Sent: Friday, January 23, 2015 7:20 AM To: ivi@lists.tizen.org Subject: [IVI] receiving signal very late from phoned Hi, everyone I'm testing phoned using test code phoned/test/main.cpp. Platform: VTC1010 image:http://download.tizen.org/releases/milestone/tizen/ivi-3.0.m14.3/tizen-3.0.m14.3-ivi_20141028.3/ steps: 1. pair and connect mobile using bluetoothctl. 2. launch test program phone with app user in weston terminal. 3. enter dial command. Then a phone call was made and first signal named CallChanged was received. Then I hangup the call from mobile. After long time(about 1min) three signals named CallChanged were received together. I checked log, phoned received ofono's signals CallChanged after a long time. Also, I tested org.tizen.dialer, every thing is fine. There's no much delay about these signals... Could anyone help me with this issue? Thanks! Ray·Bloodworth ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: [IVI] tizen-distro : memory allocation error when linking crosswalk
Hi Olivier, I really don’t think you need more than 16GB of RAM, I could compile Crosswalk on a much-lower spec system (4GB of RAM) myself and I was building for genericx86-64 too. I’m no expert in memory set-up but I was always advised to set-up a swap area of about the same size of the RAM of the system, your dev machine is rather unbalanced from that perspective, maybe an interesting experiment would be to turn swap off completely to see if it makes any difference? Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Olivier Delbeke Sent: Monday, January 19, 2015 12:10 PM To: José Bollo Cc: ivi@lists.tizen.org Subject: Re: [IVI] tizen-distro : memory allocation error when linking crosswalk Hi José, Sorry for the missing information. I'm just trying for the default MACHINE : genericx86-64. Thank you and best regards, [cid:image001.jpg@01D033E7.C6B866A0] Olivier Delbeke Senior Software Engineer olivier.delb...@awtce.bemailto:olivier.delb...@awtce.be / T. +32 2 389 25 53 AWTC Europe S.A. - Avenue de l’Industrie, 19 - 1420 Braine-l’Alleud - Belgium - www.aweurope.euhttp://www.aweurope.eu - www.aisin-aw.co.jphttp://www.aisin-aw.co.jp VAT : BE 0474.474.114 - RPM Nivelles [Inactive hide details for José Bollo ---01/19/2015 12:06:08 PM---José Bollo jose.bo...@open.eurogiciel.org]José Bollo ---01/19/2015 12:06:08 PM---José Bollo jose.bo...@open.eurogiciel.orgmailto:jose.bo...@open.eurogiciel.org José Bollo jose.bo...@open.eurogiciel.orgmailto:jose.bo...@open.eurogiciel.org 01/19/2015 12:06 PM To Olivier Delbeke olivier.delb...@awtce.bemailto:olivier.delb...@awtce.be cc ivi@lists.tizen.orgmailto:ivi@lists.tizen.org ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject Re: [IVI] tizen-distro : memory allocation error when linking crosswalk Hello, just a detail, what is your target arch? Best regards José Bollo Le lundi 19 janvier 2015 à 11:40 +0100, Olivier Delbeke a écrit : Dear all, I'm trying to compile Tizen IVI with Yocto (bitbake), but I always get the same error Cannot allocate memory when it tries to link crosswalk. All the other packages compile fine. The full error message is fatal error: xwalk: mmap: failed to allocate 1810592752 bytes for output file: Cannot allocate memory I get this even on my biggest machine (16GB RAM + 4GB swap), running Ubuntu 14.04 and having 15 GB of free memory before starting the build. In addition, I set BB_NUMBER_THREADS = 1 and PARALLEL_MAKE = -j1 in my local.conf, and I'm calling ninja with '-j1' in meta-tizen/meta-tizen-common-share/recipes-crosswalk/crosswalk/crosswalk.inc. I also don't have blocking ulimits (max memory size:unlimited, virtual memory:unlimited). Should my configuration be enough, or do I really need a machine with more than 16 GB of RAM ? Anything I should test/check ? If my machine is too small, how many GB of RAM should I add ? As a test, I'd like to compile it without the debugging symbol. How can I do that with 'ninja' ? Thank you and best regards, Olivier Delbeke Senior Software Engineer olivier.delb...@awtce.bemailto:olivier.delb...@awtce.be / T. +32 2 389 25 53 ___ AWTC Europe S.A. - Avenue de l’Industrie, 19 - 1420 Braine-l’Alleud - Belgium - www.aweurope.euhttp://www.aweurope.eu - www.aisin-aw.co.jphttp://www.aisin-aw.co.jp VAT : BE 0474.474.114 - RPM Nivelles This mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient, please note that any review, dissemination, disclosure, alteration, printing, copying or transmission of this mail and/or any file transmitted with it, is strictly prohibited and may be unlawful. If you have received this mail by mistake, please immediately notify the sender as well as our mail administrator at postmas...@aweurope.bemailto:postmas...@aweurope.be, and permanently destroy the original as well as any copy thereof. ___ IVI mailing list IVI@lists.tizen.orgmailto:IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi This mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient, please note that any review, dissemination, disclosure, alteration, printing, copying or transmission of this mail and/or any file transmitted with it, is strictly prohibited and may be unlawful. If you have received this mail by mistake, please
Re: [IVI] [Dev] Tizen-Distro the Tizen build with Yocto Project is available
Hi Patrick, -Original Message- From: Patrick Ohly [mailto:patrick.o...@intel.com] Sent: Monday, January 12, 2015 8:59 AM To: VanCutsem, Geoffroy Cc: Kévin THIERRY; d...@lists.tizen.org; ivi@lists.tizen.org Subject: Re: [IVI] [Dev] Tizen-Distro the Tizen build with Yocto Project is available On Fri, 2015-01-09 at 10:18 +, VanCutsem, Geoffroy wrote: Hi Kevin, I got past this error by installing pcre-devel on my Fedora dev machine (sudo yum install pcre-devel). Swig was then successfully compiled. Was that swig-native or swig for the target architecture? I don't know, how can I find out? One might get away with linking the native swig against the native pcre-devel, but doing the same for the target is almost certainly wrong. meta-oe/recipes-devtools/swig/swig.inc declares the dependency on libpcre. A log of the actual build failure would be useful to determine why it was not found. The log (do_configure) was attached to my previous mail, here it is again. HTH, Geoffroy log.do_configure.4259 Description: log.do_configure.4259 ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
[IVI] crosswalk-thirdparty fails to build in tizen-distro
Hi folks, I am facing a new issue building crosswalk-thirdparty using rev_0.9 of tizen-distro on a Fedora 19 machine. I am trying to build the tizen-ivi-core-image target. The error I got on the terminal window has been pasted below [1] and I am also attached the related log file. Can you help me fix this? Thanks, Geoffroy [1] Here is the error I got on the terminal [gvancuts@localhost build]$ bitbake tizen-ivi-core-image Loading cache: 100% |###| ETA: 00:00:00 Loaded 2503 entries from dependency cache. NOTE: Resolving any missing task queue dependencies NOTE: preferred version 1.60 of elfutils not available (for item elfutils) NOTE: versions of elfutils available: 0.148 0.158 0.160 NOTE: preferred version 1.60 of elfutils not available (for item elfutils) NOTE: versions of elfutils available: 0.148 0.158 0.160 NOTE: preferred version 1.60 of elfutils not available (for item elfutils-dev) NOTE: versions of elfutils available: 0.148 0.158 0.160 Build Configuration: BB_VERSION= 1.24.0 BUILD_SYS = x86_64-linux NATIVELSBSTRING = Fedora-19 TARGET_SYS= x86_64-oe-linux MACHINE = genericx86-64 DISTRO= tizen-ivi DISTRO_VERSION= 3.0 TUNE_FEATURES = m64 core2 TARGET_FPU= meta meta-oe meta-multimedia meta-ruby meta-systemd meta-gnome meta meta-oe meta-tizen-common-base meta-tizen-common-share meta-tizen-common-devtools meta-tizen-common-demo meta-tizen-ivi= master:4d13fc323cb96e3ba36d7acdb6f8ab034add91d0 NOTE: Preparing runqueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks ERROR: Function failed: do_compile (log file is located at /home/gvancuts/tizen-distro/build/tmp-glibc/work/genericx86_64-oe-linux/crosswalk-thirdparty/11.39.256.0-r0/temp/log.do_compile.9877) ERROR: Logfile of failure stored in: /home/gvancuts/tizen-distro/build/tmp-glibc/work/genericx86_64-oe-linux/crosswalk-thirdparty/11.39.256.0-r0/temp/log.do_compile.9877 Log data follows: | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common'] | DEBUG: Executing shell function do_compile | Updating projects from gyp files... | ninja: Entering directory `src/out/Release' | [1/2817] CXX obj/content/utility/content_utility.utility_main.o | [2/2817] CXX obj/content/public/utility/content_utility.content_utility_client.o | [3/2817] CXX obj/content/public/utility/content_utility.utility_thread.o | [4/2817] STAMP obj/gpu/command_buffer_service.actions_depends.stamp | [5/2817] STAMP obj/gpu/command_buffer_service.compile_depends.stamp | [6/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableLengthPoint3D.o | [7/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableLengthSize.o | [8/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableRepeatable.o | [9/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableSVGLength.o | [10/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableSVGPaint.o | [11/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableShadow.o | [12/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableShapeValue.o | [13/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableStrokeDasharrayList.o | [14/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableTransform.o | [15/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableValue.o | [16/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableValueKeyframe.o | [17/2817] CXX obj/third_party/WebKit/Source/core/animation/animatable/webcore_remaining.AnimatableVisibility.o | [18/2817] CXX obj/gpu/command_buffer/service/command_buffer_service.gpu_scheduler.o | [19/2817] CXX obj/gpu/command_buffer/service/command_buffer_service.gpu_state_tracer.o | [20/2817] CXX obj/gpu/command_buffer/service/command_buffer_service.gpu_switches.o | [21/2817] CXX obj/gpu/command_buffer/service/command_buffer_service.id_manager.o | [22/2817] CXX obj/gpu/command_buffer/service/command_buffer_service.image_manager.o | [23/2817] CXX obj/gpu/command_buffer/service/command_buffer_service.in_process_command_buffer.o | [24/2817] CXX obj/gpu/command_buffer/service/command_buffer_service.logger.o | [25/2817] CXX obj/gpu/command_buffer/service/command_buffer_service.mailbox_manager.o | [26/2817] CXX obj/gpu/command_buffer/service/command_buffer_service.mailbox_synchronizer.o | [27/2817] CXX
Re: [IVI] About playbin route setting
I'm not sure I fully understand what you'd like to accomplish but using the command-line as listed below makes you access the ALSA device directly, completely by-passing PulseAudio. If you ever want to do some more advanced mixing/routing and even benefit from the Murphy audio policy capabilities, this does not look like a wise thing to do. If you really want to specifically indicate the device that you want to use as a sink, then I'd suggest you use Gstreamer pulsesink plugin and specify the PulseAudio device that corresponds to the audio card you want to use. Jaska gave a good example in his response on a different thread: https://lists.tizen.org/pipermail/ivi/2014-December/003782.html HTH, Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Kaskinen, Tanu Sent: Sunday, December 21, 2014 4:22 PM To: 15045696...@163.com Cc: ivi@lists.tizen.org Subject: Re: [IVI] About playbin route setting On Sun, 2014-12-21 at 21:30 +0800, Zoe James wrote: With the following line command ,the mp3 output in QT media player. gst-launch-1.0 playbin uri=file:///test.mp3 audio-sink=alsasink device=hw:0,0 Is there Gstreamer API can realise alsasink device=hw:0,0(route settings). I want set the route with code not command. Thanks advance! Have you tried reading the GStreamer documentation? I'm not familiar with the GStreamer API, so I can't give exact instructions, but setting up a playback pipeline is very basic GStreamer functionality, so I'm sure there's documentation for that at http://gstreamer.freedesktop.org/documentation/ -- Tanu ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: [IVI] build murphy project error
I guess the question is what are the modifications that have not been commited yet and that are causing the compile errors? What does 'git diff' return? --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of bray Sent: Thursday, December 11, 2014 6:50 AM To: Litkey, Krisztian Cc: ivi@lists.tizen.org Subject: Re: [IVI] build murphy project error Hi, Thank you for your reply. I build the project success without --include-all. using [ --include-all ] to gsb project,because I want to modifi it latter. Yours bray At 2014-12-05 21:53:33, Litkey, Krisztian krisztian.lit...@intel.commailto:krisztian.lit...@intel.com wrote: On Fri, 2014-12-05 at 20:29 +0800, bray wrote: Hi everyone: Hi, I try to build the murphy project by using gbs. the murphy project come from tizen-3.0.m14.3-ivi_20141028.3( profile\ivi\murphy ). run command: gbs -c mygbs.conf build -A armv7l --include-all Interesting, I just tried to gbs-compile for ARM our latest release and the one you are trying to build here. Both compile without problems. I did not make any changes to the project but it fails to build. Can I ask why do you pass --include-all to gbs if you have not modified anything ? I would try compiling without --include-all. If that does not help, could you try to compile it with non-silenced $(MAKE) and send us the logs. The easiest way to do this is to rerun your gbs command with --define _with_debug 1 appended. So just run gbs -c mygbs.conf build -A armv7l --define _with_debug 1 and send me the resulting output. Can anyone help on this errors ? thanks Yours bray Cheers, Krisztian ___ IVI mailing list IVI@lists.tizen.orgmailto:IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi - Intel Finland Oy Registered Address: PL 281, 00181 Helsinki Business Identity Code: 0357606 - 4 Domiciled in Helsinki This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: [IVI] [Dev] New 'Introduction to Tizen IVI' webinar available
Thanks Leon! Let me check if we can make this more visible directly on youtube.com too. I’ll keep you posted. Cheers, Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: Ashiq Nazir [mailto:a...@tizenexperts.com] Sent: Tuesday, December 02, 2014 8:09 AM To: Leon Anavi Cc: VanCutsem, Geoffroy; ivi@lists.tizen.org Subject: Re: [Dev] New 'Introduction to Tizen IVI' webinar available Hi Leon / Geoffroy, Great idea, I'll get a post up today. Thanks Ash, Ashiq Nazir Sent using CloudMagichttps://cloudmagic.com/k/d/mailapp?ct=pacv=5.1.11.3pv=4.4.4 On Mon, Dec 01, 2014 at 10:05 PM, Leon Anavi l...@anavi.orgmailto:l...@anavi.org wrote: Hi Geoffroy, Ash, A new webinar introducing Tizen IVI has just been posted here: https://developer.tizen.org/documentation/articles/introduction-tizen-ivi. Feel free to spread the word to those who would benefit from it. Geoffroy, well done, the webinar is really nice. I shared it at twitter even twice :) The video is unlisted at YouTube, obviously because of the contact information form on tizen.org. So may be it is a bit hard for someone who doesn't know about the existence of the webinar to find it. Ash, is it possible for you to post an article about the Tizen IVI webinar on Tizen Experts? Thanks, Leon -- http://anavi.org/ ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: [IVI] [Tizen Application-dev] how to back to previous page
Hi Bray, There is no official native API in Tizen 3.0. It's possible of course to use the core APIs of the various middleware components but I would advice to architect it carefully so as to work nicely within the Tizen architecture (esp. regarding multi-seat/multi-user and the security framework). Having said that, if you can give some more details on what APIs you intend to use there may be folks on this mailing list that could help with your question regarding a 'back' button. Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: Application-dev [mailto:application-dev-boun...@lists.tizen.org] On Behalf Of bray Sent: Thursday, November 27, 2014 10:09 AM To: ivi@lists.tizen.org; application-...@lists.tizen.org Subject: [Tizen Application-dev] how to back to previous page Hi everyone: I'm developing a native app on Tizen IVI 3.0. When I press the back button,I want to back to previous page. Is there any API I can use or I must memory the flow history? any examples can be send to me. thanks! BR bray ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
[IVI] New 'Introduction to Tizen IVI' webinar available
Hi folks, A new webinar introducing Tizen IVI has just been posted here: https://developer.tizen.org/documentation/articles/introduction-tizen-ivi. Feel free to spread the word to those who would benefit from it. Enjoy! Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Running EFI Tizen images under VMware (both 32-bit and 64-bit)
Hi folks, For those interested, it is possible with minimal effort to also run EFI Tizen IVI (both 32-bit and 64-bit) images under VMware (instead of the MBR images). I have tested this so far only on VMware Player 6.0.4 running on Fedora 19 (64-bit version) but other combinations may work too. This is particularly relevant if you want to take the 64-bit builds of Tizen IVI for a test drive as there is no MBR version of those published at this stage. So here is how you can do this: - For 32-bit images (such as [1]): add the following line to your vmx file: firmware = efi - For 64-bit images (such as [2]): - Select 'Fedora 64-bit' as the OS when creating the new Virtual Machine - add the following line to your vmx file: firmware = efi Note: the reason you need to select 'Fedora 64-bit' for 64-bit images is because this what triggers the UEFI firmware from VMware to search for respectively a 32-bit or 64-bit bootloader. Note2: I believe you *must* be running a 64-bit host OS in order to run 64-bit Guest OS on VMware. I have updated the Tizen IVI 3.0 in VMware [3] wiki page with the relevant info. Let me know if you run into any issue and feel free to report if other combinations work too! Cheers, Geoffroy [1] http://download.tizen.org/releases/milestone/tizen/ivi-3.0.m14.3/tizen-3.0.m14.3-ivi_20141028.3/images/atom/ivi-efi-i586/ [2] http://download.tizen.org/releases/milestone/tizen/ivi-3.0.m14.3/tizen-3.0.m14.3-ivi_20141028.3/images/atom64/ivi-efi-x86_64/ [3] https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Widget does not install: signature verify error
--- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Jay D Bhatt Sent: Tuesday, November 11, 2014 7:27 AM To: ivi@lists.tizen.org Subject: Widget does not install: signature verify error Hi, I am working on Tizen IVI 3.0-M2-March2014 Release. I have created example.wgt on TIZEN SDK version 2.2.80, and a rpm which installs the example.wgt when systemd starts up. So, when the desktop shell comes up, when I execute command: wrt-launcher -l , I get the list of installed widgets but the example.wgt is not in the list, while GhostCluster widget is installed successfully. Ideally example.wgt should also install successfully. I try to look at the journalctl log and I find the signature verify error while installation of example.wgt. Similar error doesn't happen with pre-installed widgets like GhostCluster or MediaPlayer,etc. Can anybody provide help on this issue? What is solution/workaround for this issue? Can you try to modify the config.xml by changing the default required_version field to required_version=2.1 Here is a wiki page that has more details on this: https://wiki.tizen.org/wiki/How_to_use_SDK_to_create_web_app_for_Tizen_IVI Geoffroy ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Video playback - 'intel_do_flush_locked failed. No space left on the device'
Hi Sathish,
I don't have a good idea yet as to what's causing this issue. I've searched a
bit more for such error and found a number of reports dating back to 2012
affecting various distros (Ubuntu, Fedora, Debian). In most reports that I
glanced through, all systems were based on the 945GM graphics chipset. You
mentionned in your original mail that you boot Tizen on a laptop, could you
give us the exact spec (+ 'lspci').
Could you do a couple of additional experiments too:
- Try a different hardware, preferably a Bay Trail system (such as
VTC-1010, NUC DE3815TYKHE, MinnowBoard MAX)?
- Try the latest milestone [1] image to see if the same error occurs
Thanks,
Geoffroy
[1] https://wiki.tizen.org/wiki/IVI/Tizen-IVI_3.0-M3-Oct2014
---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
From: Sathishkumar Sivagurunathan [mailto:sathishkumar.sivagurunat...@igate.com]
Sent: Wednesday, October 29, 2014 2:52 PM
To: VanCutsem, Geoffroy; 'ivi@lists.tizen.org'
Subject: RE: Video playback - 'intel_do_flush_locked failed. No space left on
the device'
Thanks Geoffroy,
Tried to take the lead with your help. I tried df and du.. But both at
startup and when the crash happens, the values remain same..
I tried to take the log using free command.
The command I used is free -m
The intial value at startup is
total used free sharedbuffers cached
Mem: 3928419 3508100 7220
-/+ buffers/cache:191 3736
Swap:0 0 0
When I system hangs, I get this
total used free sharedbuffers cached
Mem: 3928 3679248 3466 0 3487
-/+ buffers/cache:191 3736
Swap:0 0 0
From what I understand, free memory comes from 3508 MB to 248 MB in just 7
mins in my case..
Is my understanding correct ?? And Can you help me with this to find what is
causing the memory consumption??
Thanks,
Sathish
From: VanCutsem, Geoffroy [mailto:geoffroy.vancut...@intel.com]
Sent: Friday, October 24, 2014 6:56 PM
To: Sathishkumar Sivagurunathan; 'ivi@lists.tizen.org'
Subject: RE: Video playback - 'intel_do_flush_locked failed. No space left on
the device'
FYI, this may also be relevant to you:
https://bugs.tizen.org/jira/browse/TC-1628
Geoffroy
---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
From: VanCutsem, Geoffroy
Sent: Thursday, October 23, 2014 4:54 PM
To: Sathishkumar Sivagurunathan; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org
Subject: RE: Video playback - 'intel_do_flush_locked failed. No space left on
the device'
A shot in the dark here: that seems like the typical message that arrives when
the disk (USB in your case) is full. Can you check that and also try to figure
out is a specific folder is being filled somehow ('df' and 'du' are your
friends here)?
Cheers,
Geoffroy
---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Sathishkumar
Sivagurunathan
Sent: Thursday, October 16, 2014 1:18 PM
To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org
Subject: Video playback - 'intel_do_flush_locked failed. No space left on the
device'
Hi,
I am running a gst based video player on tizen. The tizen image used is
March 2014. The image is flashed into a USB and is booted on a laptop.
After sometime running the video, I am getting the following error
intel_do_flush_locked failed. No space left on the device.
Can anyone help me in this..
Thanks,
Sathish
~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and
proprietary to IGATE and its affiliates and is intended for use only by the
recipient. If you are not the intended recipient, you are hereby notified that
any dissemination, distribution, copying or use of this e-mail is strictly
prohibited and you are requested to delete this e-mail immediately and notify
the originator or mailad...@igate.commailto:mailad...@igate.com. IGATE does
not enter into any agreement with any party by e-mail. Any views expressed by
an individual do not necessarily reflect the view of IGATE. IGATE is not
responsible for the consequences of any actions taken on the basis of
information provided, through this email. The contents of an attachment to this
e-mail may contain software viruses, which could damage your own computer
RE: ssh connection time out when cloning sources
That snapshot should be fine and I believe Jf is wondering whether this always fails on the same git repo or if it tends to fail on different ones. The most likely cause of this is network latency issues but if it *always* fails at the exact same point (i.e. the very same git repo every time) then it could also indicate a problem with that one specifically. Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Grigory Ptashko Sent: Friday, October 31, 2014 11:06 AM To: Ding, Jian-feng Cc: ivi Subject: Re: ssh connection time out when cloning sources Do you mean I should try another snapshot? 31.10.2014 12:52 пользователь JF Ding jian-feng.d...@intel.commailto:jian-feng.d...@intel.com написал: Is the failed git tree always the same one? thanks - jf.ding On Friday, October 31, 2014 at 4:48 PM, Grigory Ptashko wrote: Hello. I've got some issues with cloning the source code. I've followed this manual: https://source.tizen.org/ru/documentation/developer-guide/getting-started-guide/cloning-tizen-source?langredirect=1 I've set up the SSH access: admin@node2:~/tizen_ivi_src$ ssh tizen Welcome to Gerrit Code Review Hi Grigory Ptashko, you have successfully connected over SSH. ... Now I'm doing this: admin@node2:~/tizen_ivi_src$ repo init -u tizen:scm/manifest -b tizen -m ivi.xml remote: Counting objects: 234, done remote: Finding sources: 100% (212/212) remote: Total 365 (delta 126), reused 349 (delta 126) Receiving objects: 100% (365/365), 157.84 KiB | 186.00 KiB/s, done. Resolving deltas: 100% (200/200), done. From tizen:scm/manifest * [new branch] master - origin/master * [new branch] tizen - origin/tizen * [new branch] tizen_2.1 - origin/tizen_2.1 * [new branch] tizen_2.2 - origin/tizen_2.2 * [new tag] submit/tizen/20131009.013423 - submit/tizen/20131009.013423 * [new tag] submit/tizen/20131009.014050 - submit/tizen/20131009.014050 Your identity is: Grigory Ptashko my email here If you want to change this, please re-run 'repo init' with --config-name repo has been initialized in /home/admin/tizen_ivi_src Then this: admin@node2:~/tizen_ivi_src$ wget http://download.tizen.org/releases/milestone/tizen/ivi-3.0.m14.3/tizen-3.0.m14.3-ivi_20141028.3/builddata/manifest/tizen-3.0.m14.3-ivi_20141028.3_arm.xml -O .repo/manifests/i vi/projects.xml And finally, while trying to clone sources, I get 'Connection timeout' BUT NOT for all project: admin@node2:~/tizen_ivi_src$ repo sync -j29 Fetching project platform/upstream/crda Fetching project platform/core/api/bluetooth Fetching project platform/upstream/iputils Fetching project platform/core/api/poi Fetching project platform/upstream/python Fetching project platform/upstream/acl Fetching project platform/upstream/nettle Fetching project platform/core/system/oma-ds-agent Fetching project platform/upstream/rpmlint-mini Fetching project platform/upstream/dbus Fetching project platform/upstream/gst-libav Fetching project platform/upstream/pango Fetching project platform/upstream/libthai Fetching project platform/core/appfw/xdgmime Fetching project platform/core/security/cynara Fetching project platform/upstream/scons Fetching project platform/upstream/gmp Fetching project platform/upstream/ccache Fetching project platform/upstream/vi Fetching project platform/upstream/pciutils Fetching project platform/upstream/libdaemon Fetching project platform/upstream/flex Fetching project platform/upstream/zip Fetching project platform/core/appfw/libslp-db-util Fetching project platform/upstream/hardlink Fetching project profile/ivi/GhostCluster Fetching project platform/upstream/zypper-plugin Fetching project platform/upstream/libpng Fetching project platform/upstream/libgcrypt ... ssh: connect to host review.tizen.orghttp://review.tizen.org port 22: Connection timed out ssh: connect to host review.tizen.orghttp://review.tizen.org port 22: Connection timed out ssh: connect to host review.tizen.orghttp://review.tizen.org port 22: Connection timed out ssh: connect to host review.tizen.orghttp://review.tizen.org port 22: Connection timed out ssh: connect to host review.tizen.orghttp://review.tizen.org port 22: Connection timed out ssh: connect to host review.tizen.orghttp://review.tizen.org port 22: Connection timed out ssh: connect to host review.tizen.orghttp://review.tizen.org port 22: Connection timed out ssh: connect to host review.tizen.orghttp://review.tizen.org port 22: Connection timed out fatal: Could not read from remote repository. I tried this several times, but the result is always the same. What am I doing wrong? Thank you, Grigory. -- Best regards, Grigory Ptashko +7 (916) 1489766 grigory.ptas...@gmail.commailto:grigory.ptas...@gmail.com skype
RE: Video playback - 'intel_do_flush_locked failed. No space left on the device'
FYI, this may also be relevant to you:
https://bugs.tizen.org/jira/browse/TC-1628
Geoffroy
---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
From: VanCutsem, Geoffroy
Sent: Thursday, October 23, 2014 4:54 PM
To: Sathishkumar Sivagurunathan; ivi@lists.tizen.org
Subject: RE: Video playback - 'intel_do_flush_locked failed. No space left on
the device'
A shot in the dark here: that seems like the typical message that arrives when
the disk (USB in your case) is full. Can you check that and also try to figure
out is a specific folder is being filled somehow ('df' and 'du' are your
friends here)?
Cheers,
Geoffroy
---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Sathishkumar
Sivagurunathan
Sent: Thursday, October 16, 2014 1:18 PM
To: ivi@lists.tizen.org
Subject: Video playback - 'intel_do_flush_locked failed. No space left on the
device'
Hi,
I am running a gst based video player on tizen. The tizen image used is
March 2014. The image is flashed into a USB and is booted on a laptop.
After sometime running the video, I am getting the following error
intel_do_flush_locked failed. No space left on the device.
Can anyone help me in this..
Thanks,
Sathish
~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and
proprietary to IGATE and its affiliates and is intended for use only by the
recipient. If you are not the intended recipient, you are hereby notified that
any dissemination, distribution, copying or use of this e-mail is strictly
prohibited and you are requested to delete this e-mail immediately and notify
the originator or mailad...@igate.commailto:mailad...@igate.com. IGATE does
not enter into any agreement with any party by e-mail. Any views expressed by
an individual do not necessarily reflect the view of IGATE. IGATE is not
responsible for the consequences of any actions taken on the basis of
information provided, through this email. The contents of an attachment to this
e-mail may contain software viruses, which could damage your own computer
system. While IGATE has taken every reasonable precaution to minimise this
risk, we cannot accept liability for any damage which you sustain as a result
of software viruses. You should carry out your own virus checks before opening
an attachment. To know more about IGATE please visit
www.igate.comhttp://www.igate.com.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi
RE: Video playback - 'intel_do_flush_locked failed. No space left on the device'
A shot in the dark here: that seems like the typical message that arrives when
the disk (USB in your case) is full. Can you check that and also try to figure
out is a specific folder is being filled somehow ('df' and 'du' are your
friends here)?
Cheers,
Geoffroy
---
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Sathishkumar
Sivagurunathan
Sent: Thursday, October 16, 2014 1:18 PM
To: ivi@lists.tizen.org
Subject: Video playback - 'intel_do_flush_locked failed. No space left on the
device'
Hi,
I am running a gst based video player on tizen. The tizen image used is
March 2014. The image is flashed into a USB and is booted on a laptop.
After sometime running the video, I am getting the following error
intel_do_flush_locked failed. No space left on the device.
Can anyone help me in this..
Thanks,
Sathish
~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and
proprietary to IGATE and its affiliates and is intended for use only by the
recipient. If you are not the intended recipient, you are hereby notified that
any dissemination, distribution, copying or use of this e-mail is strictly
prohibited and you are requested to delete this e-mail immediately and notify
the originator or mailad...@igate.commailto:mailad...@igate.com. IGATE does
not enter into any agreement with any party by e-mail. Any views expressed by
an individual do not necessarily reflect the view of IGATE. IGATE is not
responsible for the consequences of any actions taken on the basis of
information provided, through this email. The contents of an attachment to this
e-mail may contain software viruses, which could damage your own computer
system. While IGATE has taken every reasonable precaution to minimise this
risk, we cannot accept liability for any damage which you sustain as a result
of software viruses. You should carry out your own virus checks before opening
an attachment. To know more about IGATE please visit
www.igate.comhttp://www.igate.com.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi
RE: Question about multi-displays control on wayland protocol
Hi Andy, There is some good info on multi-user/multi-seat architecture on these wiki pages: - https://wiki.tizen.org/wiki/Multi-user_Architecture - https://wiki.tizen.org/wiki/Multi-user_DisplayManagement - https://wiki.tizen.org/wiki/Multi-seat_Architecture I hope this helps, Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy Sent: Wednesday, October 08, 2014 9:38 AM To: Wang, Ning W; ivi@lists.tizen.org; Clark, Joel Subject: Question about multi-displays control on wayland protocol Hello everyone I have one question about multi-displays control on wayland protocol. I want to control dual displays on wayland protocol. For example,Display1 which is used to render map,while display2 which is used to render mp3-palyer. Could anyone give me some advice about how to design the software archicecture based on wayland protocol? [wayland/weston version] 1.5 [TizenIVI version] TizenCommon Thank you. Andy From: williamyan...@hotmail.commailto:williamyan...@hotmail.com To: ning.w.w...@intel.commailto:ning.w.w...@intel.com; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org; joel.cl...@intel.commailto:joel.cl...@intel.com Subject: RE: [TizenIVI 3.0]Question about multi-display on wayland protocol Date: Mon, 31 Mar 2014 08:08:11 + To：Joel,Ning Thank you very much for your reply. Clone is not yet supported by Wayland/Weston, but I’ve been told it will be available in the next Wayland release (1.5) due in April. We plan to pull that into Tizen IVI as soon as we can. Clone mode is the same as extended mode? I have seen some Demo products whick had implemted dual display on tizen IVI. I want to control dual display on tizen IVI 3.0,could you give me some advice? Thank you. Andy. From: williamyan...@hotmail.commailto:williamyan...@hotmail.com To: ning.w.w...@intel.commailto:ning.w.w...@intel.com; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: [TizenIVI 3.0]Question about multi-display on wayland protocol Date: Fri, 28 Mar 2014 10:22:40 + To：Ning Thank you very much for your reply. That is, if Display-1 is 1920x1080 and primary and Display-2 is 1920x1080 then Display-1 output origin starts at x=0,y=0 and Display-2 output origin starts at x=1920,y=0. It means that if i draw a graphic start at x=1920,y=0.,its graphic will be drawed in display-2 ?? Andy. From: ning.w.w...@intel.commailto:ning.w.w...@intel.com To: williamyan...@hotmail.commailto:williamyan...@hotmail.com; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: [TizenIVI 3.0]Question about multi-display on wayland protocol Date: Fri, 28 Mar 2014 06:29:49 + Hi Andy, AFAIK, weston desktop (desktop-shell) in IVI 3.0 supports dual display in extended mode out-of-box. That is, if Display-1 is 1920x1080 and primary and Display-2 is 1920x1080 then Display-1 output origin starts at x=0,y=0 and Display-2 output origin starts at x=1920,y=0. Thanks, Ning From: ivi-boun...@lists.tizen.orgmailto:ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy Sent: Thursday, March 27, 2014 2:50 PM To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: [TizenIVI 3.0]Question about multi-display on wayland protocol Hello everyone I have one question about multi-display on wayland protocol. I want to control dual displays on wayland protocol. I try to set wl_display_connect function,but it seen to be not useful. Could anyone give me some advice about how to control dual displays on wayland protocol? [TizenIVI version] 3.0 Thank you. Andy ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: weston crashes when running IVI images in VMware player
-Original Message- From: Kanavin, Alexander Sent: Tuesday, October 21, 2014 12:50 PM To: VanCutsem, Geoffroy; ivi@lists.tizen.org Subject: Re: weston crashes when running IVI images in VMware player On 10/20/2014 07:58 PM, VanCutsem, Geoffroy wrote: - VMware tells that No 3D support available from the host. The 3D features of the virtual machine will be disabled. That's most likely the problem. The one thing that's missing with VMWare Player under Linux is that 3D will work when there will be TF2-S3TC Texture Support enabled in DRI. Problem is described here: http://dri.freedesktop.org/wiki/S3TC/. Try to enable that and see if that helps. This info used to be on the Tizen wiki page but I assume it was removed because someone thought it was obsolete information, we will add it back if you confirm this is the problem you are facing. Yep, setting the environment variable force_s3tc_enable=true before launching vmplayer did the trick, thanks! You should update both the tizen wiki and the crosswalk documentation. Thanks for confirming this solves your problem, I have updated the Tizen wiki (by adding back the old section) and created a pull request for the Crosswalk website. Cheers, Geoffroy --- Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: The Modello packages name must not contains underscore _
-Original Message-
From: ronan [mailto:ronan.lemart...@open.eurogiciel.org]
Sent: Thursday, October 02, 2014 9:11 AM
To: VanCutsem, Geoffroy; Manuel Bachmann
Cc: ivi@lists.tizen.org
Subject: Re: The Modello packages name must not contains underscore _
I guess my question really was whether that meant that all these
exceptions listed on that page [1] are by default packages that could
never be included in any Yocto-based distribution?
If you take a pkg (eg:gstreamer-0_10)
yocto call the recipes file:
gstreamer_0.10.36.bb
for ${PN}_${PV}.bb
PN: package name
PV: package version
and when the rpm is generate, the file is named:
${PN}-${PV}-${PR}.${ARCH}.rpm
the underscore _ is reserve by yocto for recipes name/version delimiter so :
- Modello_Installer_git.bb mean = PN=Modello PV=Installer_git
Thanks for this explanation, this helps me understand this better.
How do you handle the wpa_supplicant case for example?
If you want a alignment between Tizen from OBS/yocto you need to have
the same package name.
Modello_Installer should become Modello-Installer
Consider the problem in an other view point:
Does anyone have a justification to keep the actual Modello_* %name
for the rpm files generate?
I don't, I have no issue with changing the name if it makes life easier for
everyone.
Thanks,
Geoffroy
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient(s). Any review or distribution by others is
strictly prohibited. If you are not the intended recipient, please contact the
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi
RE: The Modello packages name must not contains underscore _
-Original Message- Yocto do NOT support the underscore _ in package name. And we want to build Tizen with Yocto . Out of curiosity, does that mean that Yocto just *cannot* build any of these? Cheers, Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Booting Tizen image from VM on 32 bit windows host
Hi Prathamesh, I have never tried to run this on a Windows 32-bit system, it's known to work on 64-bit systems. Can you give us some more details on the failure: - What Tizen image are you trying to run - What version of VMware - How is it failing? Thanks, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Prathamesh P Ghanekar Sent: Tuesday, September 30, 2014 1:27 PM To: ivi@lists.tizen.org Subject: Booting Tizen image from VM on 32 bit windows host Hi, I am trying to boot tizen vmdk image in VMWare environment. But, I am failing to do so on a 32 bit windows host system. Is this a known issue? Regards, Prathamesh ~~Disclaimer~~~ Information contained and transmitted by this e-mail is confidential and proprietary to IGATE and its affiliates and is intended for use only by the recipient. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator or mailad...@igate.commailto:mailad...@igate.com. IGATE does not enter into any agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of IGATE. IGATE is not responsible for the consequences of any actions taken on the basis of information provided, through this email. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While IGATE has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening an attachment. To know more about IGATE please visit www.igate.comhttp://www.igate.com. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: mounting the USB as a normal user using udisksctl
Hi Prathamesh, Can you review this Feature Request in JIRA and let me know if you see any gaps versus what you'd like to do (I believe it covers it): https://bugs.tizen.org/jira/browse/TC-614 The current status is that the solution put in place is blocked by 2 P1 bugs (respectively TC-50 and TC-105) and these are actively being worked on. Of course if you have patches to contribute to fix these, don't be shy! ;-) Thanks, Geoffroy From: Prathamesh P Ghanekar [mailto:prathamesh.ghane...@igate.com] Sent: Friday, September 19, 2014 11:45 AM To: VanCutsem, Geoffroy; ivi@lists.tizen.org Subject: RE: mounting the USB as a normal user using udisksctl Hi Geoffroy Thanks for your reply. Let me tell you my requirement in brief. I want to access the contents of USB from my application as a normal user. At the same time, I need USB insertion and removal events/notifications. I am able to achieve the first part through smackfsroot='*',smafsdef='*' options, to the mount command. But, when I do such a mount, I can't get the USB insertion and removal events programmatically using udisks APIs or Udisksctl monitor utility. Can you suggest a solution for the above mentioned requirement, with or without using udisks? Thanks in advance, Prathamesh From: VanCutsem, Geoffroy [mailto:geoffroy.vancut...@intel.com] Sent: 19 September 2014 14:02 To: Prathamesh P Ghanekar; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: mounting the USB as a normal user using udisksctl Hi Prathamesh, This is most likely the same problem as reported here: https://bugs.tizen.org/jira/i#browse/TC-50 (yet unresolved). Thanks, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Prathamesh P Ghanekar Sent: Friday, September 19, 2014 7:57 AM To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: mounting the USB as a normal user using udisksctl Hi, I am trying to mount the USB as a normal user using udisksctl mount -b /dev/sd[b-z] command. But, it gives me the following error. Error mounting /dev/sdc: GDBus.Error:org.freedesktop.UDisks2.Error.NotAuthorizedCanObtain: Not authorized to perform operation As root, I am able to do it. How can I mount a device as a normal user using udiskctl? Regards, Prathamesh ~~Disclaimer~~~ Information contained and transmitted by this e-mail is confidential and proprietary to IGATE and its affiliates and is intended for use only by the recipient. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator or mailad...@igate.commailto:mailad...@igate.com. IGATE does not enter into any agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of IGATE. IGATE is not responsible for the consequences of any actions taken on the basis of information provided, through this email. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While IGATE has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening an attachment. To know more about IGATE please visit www.igate.comhttp://www.igate.com. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ~~Disclaimer~~~ Information contained and transmitted by this e-mail is confidential and proprietary to IGATE and its affiliates and is intended for use only by the recipient. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator or mailad...@igate.commailto:mailad...@igate.com. IGATE does not enter into any agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of IGATE. IGATE is not responsible for the consequences of any actions taken on the basis of information provided, through this email. The contents of an attachment
RE: how to make Xwayland auto start on tizen-ivi-3.0 image
Hi Steve, We are using systemd in Tizen 3.0 (Tizen 2.x uses SysV init). I've never tried to run xwayland but Weston should be starting automatically and I _believe_ all you need is to make sure the xwayland module is also loaded (by adding module=xwayland.so to your weston.ini). Hope this helps, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Steve (YiLiang) Zhou Sent: Monday, September 01, 2014 10:09 AM To: ivi@lists.tizen.org Cc: wayland-de...@lists.freedesktop.org Subject: how to make Xwayland auto start on tizen-ivi-3.0 image Dear all, I have a tizen device which run a wayland tizen-ivi-3.0 image ,we built xwayland on it , but right now I have to start it manually, I want to make it auto start like tizen-ivi-2.0 image. I can't find the files like inittab or rc.sysinit ,so I want to figure out how it startup and how to startup xwayland automatically. Any idear? Thanks and Best Regards Steve Zhou CONFIDENTIALITY NOTICE: The information contained in this message may be privileged and/or confidential. If you are not the intended recipient, or responsible for delivering this message to the intended recipient, any review, forwarding, dissemination, distribution or copying of this communication or any attachment(s) is strictly prohibited. If you have received this message in error, please notify the sender immediately, and delete it and all attachments from your computer and network. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: 回复：RE: 回复：RE: Problem : Tizen downloadRequest
I believe the Download API of that version does work (the difference under the hood is that the tizen_20140422.1 aka 3.0-M2-March2014 image is based on Webkit). Cheers, Geoffroy From: black [mailto:946171...@qq.com] Sent: Friday, August 29, 2014 3:59 AM To: VanCutsem, Geoffroy Cc: ivi; application-dev Subject: 回复：RE: 回复：RE: Problem : Tizen downloadRequest Thank you for your reply. I will merge the fixed code and test again. By the way, is it possible that 'Download API' of following version can be used? ■http://download.tizen.org/releases/milestone/tizen/ivi/tizen_20140422.1/ -- 原始邮件 -- 发件人: VanCutsem, Geoffroy;geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com; 发送时间: 2014年8月28日(星期四) 晚上6:43 收件人: black946171...@qq.commailto:946171...@qq.com; 抄送: iviivi@lists.tizen.orgmailto:ivi@lists.tizen.org; application-devapplication-...@lists.tizen.orgmailto:application-...@lists.tizen.org; 主题: RE: 回复：RE: Problem : Tizen downloadRequest I’m assuming you are therefore now using a Tizen IVI image that uses Crosswalk. The ‘Download API’ is not quite ready yet for Crosswalk in IVI. You can check the status via the following bug reports: - Feature request: https://crosswalk-project.org/jira/browse/XWALK-1070 - Bug report: https://crosswalk-project.org/jira/browse/XWALK-2400 After checking the comments in XWALK-1070 it looks like it’s just been implemented/fixed in Crosswalk and should therefore shortly find its way into Tizen IVI. Geoffroy From: black [mailto:946171...@qq.com] Sent: Thursday, August 28, 2014 12:21 PM To: VanCutsem, Geoffroy Cc: ivi; application-dev Subject: 回复：RE: Problem : Tizen downloadRequest Thank you for your reply. I just used the latest modified IVI , the error has been resolved. But, when I used that example code, the listener returned error name : InvalidAccessError which is not explained in API References. -- 原始邮件 -- 发件人: VanCutsem, Geoffroy;geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com; 发送时间: 2014年8月28日(星期四) 凌晨0:34 收件人: black946171...@qq.commailto:946171...@qq.com; iviivi@lists.tizen.orgmailto:ivi@lists.tizen.org; 主题: RE: Problem : Tizen downloadRequest Can you confirm which version of Tizen IVI you are using? From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of black Sent: Wednesday, August 27, 2014 4:25 AM To: ivi Subject: Problem : Tizen downloadRequest When I use the Tizen API var downloadRequest = new tizen.DownloadRequest(http://download.tizen.org/tools/README.txt;, documents); downloadId = tizen.download.start(downloadRequest, listener); following Error occurred ： ivi_box wrt_launchpad_daemon[227]: ERR797:evas_main evas_object_smart.c:749 evas_object_smart_need_recalculate_set() Object 0x96b7710 is not stable during recalc loop How to resolve this issue. Please help. Thanks a lot! Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: 回复：RE: Problem : Tizen downloadRequest
I’m assuming you are therefore now using a Tizen IVI image that uses Crosswalk. The ‘Download API’ is not quite ready yet for Crosswalk in IVI. You can check the status via the following bug reports: - Feature request: https://crosswalk-project.org/jira/browse/XWALK-1070 - Bug report: https://crosswalk-project.org/jira/browse/XWALK-2400 After checking the comments in XWALK-1070 it looks like it’s just been implemented/fixed in Crosswalk and should therefore shortly find its way into Tizen IVI. Geoffroy From: black [mailto:946171...@qq.com] Sent: Thursday, August 28, 2014 12:21 PM To: VanCutsem, Geoffroy Cc: ivi; application-dev Subject: 回复：RE: Problem : Tizen downloadRequest Thank you for your reply. I just used the latest modified IVI , the error has been resolved. But, when I used that example code, the listener returned error name : InvalidAccessError which is not explained in API References. -- 原始邮件 -- 发件人: VanCutsem, Geoffroy;geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com; 发送时间: 2014年8月28日(星期四) 凌晨0:34 收件人: black946171...@qq.commailto:946171...@qq.com; iviivi@lists.tizen.orgmailto:ivi@lists.tizen.org; 主题: RE: Problem : Tizen downloadRequest Can you confirm which version of Tizen IVI you are using? From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of black Sent: Wednesday, August 27, 2014 4:25 AM To: ivi Subject: Problem : Tizen downloadRequest When I use the Tizen API var downloadRequest = new tizen.DownloadRequest(http://download.tizen.org/tools/README.txt;, documents); downloadId = tizen.download.start(downloadRequest, listener); following Error occurred ： ivi_box wrt_launchpad_daemon[227]: ERR797:evas_main evas_object_smart.c:749 evas_object_smart_need_recalculate_set() Object 0x96b7710 is not stable during recalc loop How to resolve this issue. Please help. Thanks a lot! Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Ethernet and Sound Cards not detecting for EFI image
Sounds like there may not be drivers in your kernel for these devices. What platform are you using? From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Jay D Bhatt Sent: Wednesday, August 27, 2014 1:26 PM To: ivi@lists.tizen.org Subject: Ethernet and Sound Cards not detecting for EFI image Hi, I am working on TIzen EFI image and I found that the Ethernet and sound cards are not getting detected for March Release. I also tried working on June EFI Tizen image but , still it has same problem. If I do ifconfig, I don't get ipaddress ( my etherent cable is connected). Similarly, when I do aplay -l command I get no sound cards found as output. I face these issues on both releases. Is there any workaround for these problems? Thanks, Jay ~~Disclaimer~~~ Information contained and transmitted by this e-mail is confidential and proprietary to IGATE and its affiliates and is intended for use only by the recipient. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator or mailad...@igate.commailto:mailad...@igate.com. IGATE does not enter into any agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of IGATE. IGATE is not responsible for the consequences of any actions taken on the basis of information provided, through this email. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While IGATE has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening an attachment. To know more about IGATE please visit www.igate.comhttp://www.igate.com. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Problem : Tizen downloadRequest
Can you confirm which version of Tizen IVI you are using? From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of black Sent: Wednesday, August 27, 2014 4:25 AM To: ivi Subject: Problem : Tizen downloadRequest When I use the Tizen API var downloadRequest = new tizen.DownloadRequest(http://download.tizen.org/tools/README.txt;, documents); downloadId = tizen.download.start(downloadRequest, listener); following Error occurred ： ivi_box wrt_launchpad_daemon[227]: ERR797:evas_main evas_object_smart.c:749 evas_object_smart_need_recalculate_set() Object 0x96b7710 is not stable during recalc loop How to resolve this issue. Please help. Thanks a lot! Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Running HTML5 Modello applications under a recent IVI image
Hi Manuel, We have renamed the packages when we gave that HTML5 UI its new name (Modello). The new git repos/packages are “profile/ivi/Modello_*”. This is what you should use in the latest images based on Crosswalk. Thanks, Geoffroy From: Manuel Bachmann [mailto:manuel.bachm...@open.eurogiciel.org] Sent: Wednesday, July 02, 2014 9:54 PM To: ivi@lists.tizen.org Cc: VanCutsem, Geoffroy Subject: Running HTML5 Modello applications under a recent IVI image Hi folks, I am trying to install and run the Modello applications from the html5_UI_* repos (html5_UI_HomeScreen, html5_UI_Phone...) under the latest IVI snapshot. As Tizen recently switched from WRT to Crosswalk, most of dependencies and directives of these repos (wrt-installer, wrt-plugins-ivi, ...) are now obsolete. Plus, they don't seem to work well out-of-the-box. Is there any new branch or repo I should be using instead of the profile/ivi/html5_UI_* ones ? -- Regards, Manuel BACHMANN Tizen Project VANNES-FR Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: [Crosswalk-dev] Tizen IVI Build bot fails at installing packages
I don’t quite yet understand what is wrong but there are two git trees providing each a different version of sysman (system-server and libslp-sysman), this is true in both Tizen Common and Tizen IVI. One difference I noted is that libslp-sysman in Tizen:IVI was not submitted from GBS (it was a copypac of the version in Tizen Common), I don’t know if that’s the cause of your trouble but it’s something the REs should fix anyway. Copying the Tizen IVI mailing list as this is more a Tizen IVI problem than a Crosswalk one. Geoffroy From: Crosswalk-dev [mailto:crosswalk-dev-boun...@lists.crosswalk-project.org] On Behalf Of Romuald TEXIER-MARCADÉ Sent: Monday, June 30, 2014 9:20 PM To: crosswalk-dev Subject: [Crosswalk-dev] Tizen IVI Build bot fails at installing packages [ 88s] installing system-server-2.0.0-4.1 [ 88s]file /usr/bin/regpmon from install of system-server-2.0.0-4.1.i686 conflicts with file from package sysman-2.0.0-3.3.i686 [ 88s]file /usr/bin/set_pmon from install of system-server-2.0.0-4.1.i686 conflicts with file from package sysman-2.0.0-3.3.i686 [ 88s] exit ... Is there something broken in the IVI repos? Tizen Common Bot is working well. Regards, Romuald. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: [TizenIVI 3.0]HTML5 WebAPP can not display camera video
Hi Andy, I believe the right API for opening a camera device and accessing its stream is getUserMedia(). What parameters have you used so far with your video tag? Thanks, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy Sent: Thursday, June 26, 2014 11:19 AM To: ivi@lists.tizen.org Subject: RE: [TizenIVI 3.0]HTML5 WebAPP can not display camera video Hello everyone How does webframework/webkit open camera device? Andy From: williamyan...@hotmail.commailto:williamyan...@hotmail.com To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: [TizenIVI 3.0]HTML5 WebAPP can not display camera video Date: Thu, 26 Jun 2014 07:45:57 + Hello everyone I have developed a HTML5 WebApp with tabvideo for displaying camera video. When i run this webapp on VTC1010 device,it can not display camera video. I got some error message from the console. [Error Message] 6月 26 00:23:25 ivi_box WebProcess[295]: gboolean WebCore::MediaPlayerPrivateGStreamer::handleMessage(GstMessage*)(1076) ERROR: GST_MESSAGE_ERROR 5: Could not open resource for reading. (url=camera://1) 6月 26 00:23:25 ivi_box WebProcess[295]: void WebCore::MediaPlayerPrivateGStreamer::loadingFailed(WebCore::MediaPlayer::NetworkState)(1914) ERROR: NetworkState : 4 But it can display camera video by the same webapp on the PC machine. Could anyone give me some advice? Thank you. Andy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Can not Boot Tizen Common on Exynos4412
A shot in the dark from me but here are the next few things you should check: - Make sure you have the driver for the MMC controller built-in (given you don’t use an initrd) - Double-check the device/partition name of the MMC card - Insert a ‘rootwait’ in your kernel command-line - Have you replaced the /sbin/init file on the Tizen filesystem by any chance? Thanks, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Philippe Coval Sent: Thursday, June 26, 2014 5:22 PM To: Dominig ar Foll Cc: ivi@lists.tizen.org Subject: Re: Can not Boot Tizen Common on Exynos4412 It should boot without smack since you're on linux-3.5 you wont have it I had it also disabled on tizen-sunxi (linux-3.4) Even tizen's linux-3.10 branch for odroid has smack disabled (seems smack is not the top priority yet) I would suggest you to try the same config file you have on ubuntu and try again Later 2014-06-26 16:14 GMT+02:00 Dominig ar Foll dominig.arf...@fridu.netmailto:dominig.arf...@fridu.net: Hello, I doubt that your kernel support Smacks security label. Upgrade your kernel first and check that you have enable Smacks. Dominig Le 25/06/2014 07:25, kongling a écrit : Hi, My platform is called iTOP-4412 that is made in china. I have 3.5 kernel and it can boot with ubuntu file-system. But the Tizen common still get stuck in Freeing init memory:xxx K. My bootargs is root=/dev/mmcblk2 rw rootfstype=ext4 console=ttySAC2,115200 noinitrd init=/sbin/init. Could you help me? Best Regards, kong ling Date: Fri, 20 Jun 2014 10:05:07 +0200 Subject: Re: Can not Boot Tizen Common on Exynos4412 From: www.rzr.online...@gmail.comhttp://www.rzr.online...@gmail.com To: k870818...@outlook.commailto:k870818...@outlook.com CC: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Hi What is your exynos4412 platform ? make sure it's exynos4412-trats2 (rdpd?) common-arm-09.06.2014.tar.lzma (uses exynos4412-trats2.dtb KVERS=3.10.39+) for odroid u3 you need to rebuild kernel and join device tree file to zImage on the 1st part it will boot with default bootloader but I dont have a working .config file to share yet hope it helps On Fri, Jun 20, 2014 at 9:48 AM, kongling k870818...@outlook.commailto:k870818...@outlook.com wrote: Hi, I'm trying to run the file-system in [common-arm-09.06.2014.tar.lzma (https://wiki.tizen.org/wiki/ARM#SUNXI_.28AllWinner.29)] with Exynos4412. The kernel version is 3.0.15 and i think it got stuck in [sbin/init]. [3.525490] Freeing init memory: 212K [3.530498] Failed to execute /linuxrc. Attempting defaults... [ 62.558748] failed to copy MFC F/W during init [ 65.542356] CPU1: shutdown Is this kernel's version too low to run the file-system? Best Regards, kong ling ___ IVI mailing list IVI@lists.tizen.orgmailto:IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi -- Related Obsession : http://rzr.online.fr/q/harmattan ___ IVI mailing list IVI@lists.tizen.orgmailto:IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi -- Dominig ar Foll Senior Software Architect Intel Open Source Technology Centre ___ IVI mailing list IVI@lists.tizen.orgmailto:IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Wifi with Intel Centrino 6235 with Tizen IVI on NDIS166
Hi Rudi, The first thing I’d check is whether you have an antenna connected. Some earlier versions of the NDiS-166 only had one antenna connector at the back and you could therefore only have either BT or WiFi. It’s that’s the case, try to open up the box and change the antenna to the other connector on the 6235 AGN card for a quick verification that WiFi is functioning correctly. Cheers, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Rudolf Streif Sent: Monday, June 16, 2014 7:10 AM To: ivi@lists.tizen.org Subject: Wifi with Intel Centrino 6235 with Tizen IVI on NDIS166 I have Tizen IVI (don't exactly know what build but kernel 3.12.4-10.1) on NDIS166 that has an Intel Centrino 6235 AGN with BT card installed. BT works fine but Wifi does not. Diagnostics: * iwlwifi and iwldvn modules are loaded. * The firmware seems to be the correct version: iwlwifi-6000g2b-6.mode. * ifconfig shows the device as wlan0. * rfkill list shows 0: hci0: Bluetooth Soft blocked:no Hard blocked: no 3: phy2: Wireless LAN Soft blocked:no Hard blocked: no * connmanctl technologies /net/connman/technologies/wifi Name = WIFI Type = wifi Powered = True Connected = False Tethering = False Hidden = False However, when I scan for wifi networks the scanning finishes almost immediately with Scan completed for wifi with no networks found (although there are a couple of them around). Any hints would be appreciated. Thanks, Rudi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: install wigit in for crosswalk.
Hi Art, What version of Crosswalk have you installed? The error looks like this issue: https://crosswalk-project.org/jira/browse/XWALK-1112 (but was resolved some time ago). Make sure you follow Brian’s recommendation below too, i.e. run xwalkctl as ‘app’ and using the full path to the widget. Cheers, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Jones, Brian J Sent: Saturday, May 31, 2014 10:58 PM To: McGee, Art; ivi@lists.tizen.org; d...@lists.tizen.org Subject: RE: install wigit in for crosswalk. If I recall correctly, you need to provide the full path to Browser.wgt. Might not be the issue, but worth a shot. Other things to keep in mind is that you must be calling xwalkctl as app, though I’m pretty sure it complains if you try as root. From: McGee, Art [mailto:amcg...@jaguarlandrover.com] Sent: Friday, May 30, 2014 3:40 PM To: Jones, Brian J; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org; d...@lists.tizen.orgmailto:d...@lists.tizen.org Subject: Re: install wigit in for crosswalk. I've installed the package crosswalk on JAN 15 EOY with the zypper reference. I have been unable to install a wigit. Command: xwalkctl -i Browser.wgt Response: Service 'org.crosswalkproject.Runtime1' could not be reached: Error colling StartServiceByName for org.crosswalkproject.Runtime1: Timeout was reached I am running this from the console in the wayland gui. Is there something I'm missing. On 30 May 2014 14:26, Jones, Brian J brian.j.jo...@intel.commailto:brian.j.jo...@intel.com wrote: Art, Just a heads up that apps need to be launched using the full binary path. xwalk-launcher won’t work with Modello apps, this is a known bug that supposedly just got fixed. So for now use xwalkctl to get a list of your apps, then use /home/app/.config/xwalk-service/applications/appID/bin/xwalk-appID. Otherwise, some of the tizen web APIs will fail and all you’ll get is a black screen. From: McGee, Art [mailto:amcg...@jaguarlandrover.commailto:amcg...@jaguarlandrover.com] Sent: Friday, May 30, 2014 2:20 PM To: Jones, Brian J Cc: d...@lists.tizen.orgmailto:d...@lists.tizen.org; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: Re: Installing crosswalk Thanks, Brian that worked. Now I'll try launching some apps. On 30 May 2014 13:37, Jones, Brian J brian.j.jo...@intel.commailto:brian.j.jo...@intel.com wrote: Oh and another option is to point your zypper repo to http://download.tizen.org/snapshots/tizen/ivi/ivi/latest/repos/ivi/ia32/packages . You’ll then be able to zypper install crosswalk. From: IVI [mailto:ivi-boun...@lists.tizen.orgmailto:ivi-boun...@lists.tizen.org] On Behalf Of Jones, Brian J Sent: Friday, May 30, 2014 1:28 PM To: McGee, Art; d...@lists.tizen.orgmailto:d...@lists.tizen.org; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: Installing crosswalk Hi Art, You can get it from https://crosswalk-project.org/#documentation/downloads in rpm form, rather than building it yourself. The current IVI images will have it pre-installed. From: McGee, Art [mailto:amcg...@jaguarlandrover.commailto:amcg...@jaguarlandrover.com] Sent: Friday, May 30, 2014 1:18 PM To: Jones, Brian J; d...@lists.tizen.orgmailto:d...@lists.tizen.org; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: Installing crosswalk I've been working on installing crosswalk on an NDIS166. I'm using gbs to build the package on Ubuntu 12.04. It is taking quite some time currently running the script that came from the cloned repository. It seems stuck [1:06:43] Still working on: [1:06:43] src I'm currently letting it run. I'm Running Jan15th EOY release of Tizen IVI. Is there a binary rpm I can use to install on this platform. I've tried using zypper but I don't know what package that might be in zypper. Thanks in advance for all your assistance. I really want to start moving our projects to crosswalk. -- Art McGee Infotainment Engineer Jaguar Land Rover One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, Oregon, 97204 -- Art McGee Infotainment Engineer Jaguar Land Rover One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, Oregon, 97204 -- Art McGee Infotainment Engineer Jaguar Land Rover One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, Oregon, 97204 Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: [TizenIVI 3.0]Audio Record
There is no GUI app that does that (that I'm aware of) but you can look at parecord (command-line) to play with this (works on PulseAudio, which I'd recommend over going straight to ALSA). You could also examine its source code. Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy Sent: Friday, May 30, 2014 9:05 AM To: ivi@lists.tizen.org Subject: [TizenIVI 3.0]Audio Record Hello everyone I want to implement audio record based on ALSA architecture. My question:is there a software component which have implemented audio record in tizen ivi? Thank you. Andy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: [Tizen IVI 3.0] Shared folder in VMWARE
Hi Orti, I have never tried really hard but my understanding is that we’d need the VMware Tools to be installed in the guest OS (ie. Tizen IVI) and more specifically the vmhgfs module in order to mount that shared folder in any Linux guest OS. I have tried that once (quite some time ago) and it did not work straight away, I did not investigate any further. I have been using ‘scp’ to transfer files between my VM and my host OS (or any other computer). I typically set-up the network in ‘bridge’ mode instead of the default ‘NAT’ mode. Cheers, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Orti Senderos Sent: Wednesday, May 28, 2014 5:58 PM To: ivi@lists.tizen.org Subject: [Tizen IVI 3.0] Shared folder in VMWARE Hello, I have install the last release of the Tizen IVI on the VMWARE running on Ubuntu, and I have share a folder. Where is that folder on Tizen? Does anyone solve this problem? Thanks in advance. Orti Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: automotive-message-broker do not start
Hi Joachim, I haven't tried myself but here are a couple of things you could check: - Check the path where the lib was installed, if it is /usr/local/lib (I _think_ it's the default), then you should export LD_LIBRARY_PATH=/usr/local/lib before calling ambd - Maybe try to also run 'sudo ldconfig' Hope this helps, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of joachim rodrigues Sent: Monday, May 26, 2014 10:11 PM To: ivi@lists.tizen.org Subject: automotive-message-broker do not start Hi, I've just successfully installed automotive-message-broker. At least i did not have errors. I followed steps described : https://github.com/otcshare/automotive-message-broker ie : cd automotive-message-broker mkdir build cd build cmake .. make To install: sudo make install Then when i try to start : ambd I'm getting : ambd: error while loading shared libraries: libamb.so.0.10.902: cannot open shared object file: No such file or directory I'm ruunig on xubuntu 12.10 Thanks in advance Joachim Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Bluetooth power on error
Just to follow up on that, it turned out Mariem was working on the Tizen IVI
emulator and that does not support Bluetooth (unless I've totally missed it
myself too).
Geoffroy
From: Jones, Brian J
Sent: Thursday, May 22, 2014 7:34 PM
To: VanCutsem, Geoffroy; Mariem Mhiri; ivi@lists.tizen.org
Subject: RE: Bluetooth power on error
Check hciconfig first. If it says 'down', which it probably does, use
hciconfig hci0 up to get it going. After that , power on should work for you.
From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of VanCutsem, Geoffroy
Sent: Thursday, May 22, 2014 3:59 AM
To: Mariem Mhiri; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org
Subject: RE: Bluetooth power on error
What's your hardware platform? What does the 'list' command show?
The first thing I'd check is what BT adapter you have and whether it's started
correctly ('journalctl -b' output would also be useful here).
Geofffroy
From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Mariem Mhiri
Sent: Thursday, May 22, 2014 12:42 PM
To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org
Subject: Bluetooth power on error
Hello,
I am developing an application in which will be a data exchange using
bluetooth. So I installed bluez on Tizen IVI using this command zypper install
bluez-test . To power on the bluetooth I do the flowing:
#bluetoothclt
#power on
but when I try to power on the bluetooth I get this error: no default
controller available.
Does any one have any idea what should I do to correct this error?
Best regards,
Mariem
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient(s). Any review or distribution by others is
strictly prohibited. If you are not the intended recipient, please contact the
sender and delete all copies.
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient(s). Any review or distribution by others is
strictly prohibited. If you are not the intended recipient, please contact the
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi
RE: [Tizen IVI 3.0] Compile Opencv with Qt
Hi Mikko, (sorry for top-posting) Is there any interdependency between the two options (it does not look like it at first glance)? Thanks, Geoffroy From: Ylinen, Mikko [mailto:mikko.yli...@intel.com] Sent: Thursday, May 22, 2014 11:55 AM To: VanCutsem, Geoffroy Cc: Rees, Kevron M; Philippe Coval; ivi@lists.tizen.org Subject: Re: [Tizen IVI 3.0] Compile Opencv with Qt On Wed, May 21, 2014 at 4:32 PM, VanCutsem, Geoffroy geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com wrote: +1 on enabling the Qt-OpenCV bits. Just be aware of https://review.tizen.org/gerrit/#/c/20121/ Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Bluetooth power on error
What's your hardware platform? What does the 'list' command show?
The first thing I'd check is what BT adapter you have and whether it's started
correctly ('journalctl -b' output would also be useful here).
Geofffroy
From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Mariem Mhiri
Sent: Thursday, May 22, 2014 12:42 PM
To: ivi@lists.tizen.org
Subject: Bluetooth power on error
Hello,
I am developing an application in which will be a data exchange using
bluetooth. So I installed bluez on Tizen IVI using this command zypper install
bluez-test . To power on the bluetooth I do the flowing:
#bluetoothclt
#power on
but when I try to power on the bluetooth I get this error: no default
controller available.
Does any one have any idea what should I do to correct this error?
Best regards,
Mariem
Intel Corporation NV/SA
Kings Square, Veldkant 31
2550 Kontich
RPM (Bruxelles) 0415.497.718.
Citibank, Brussels, account 570/1031255/09
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient(s). Any review or distribution by others is
strictly prohibited. If you are not the intended recipient, please contact the
sender and delete all copies.
___
IVI mailing list
IVI@lists.tizen.org
https://lists.tizen.org/listinfo/ivi
RE: RE: Problem with default ac domain package
It sounds like I may be the source of your problems then ;-) Let me summarize what I think you’re trying to do: rebuild locally a package (ico-uxf-homescreen) using a local repo that you are creating yourself by downloading all dependencies for that package. Is this correct? If so, you’d need to modify your gbs.conf to point at the local repo and make sure that that local repo contains *all* packages which are direct and indirect dependencies… that may be a tricky exercise. Thanks, Geoffroy From: karthikkarthik...@yahoo.in [mailto:karthikkarthik...@yahoo.in] Sent: Wednesday, May 21, 2014 7:40 PM To: VanCutsem, Geoffroy; José Bollo Cc: ivi@lists tizen. org Subject: Re: RE: Problem with default ac domain package Thanks Geoffroy, I am trying to build the package locally by downloading the individual rpm required. The rpm folder seems to continue to older versions of the packages. Indeed, the gbs.conf file I am using was passed on to me by you.. Thanks. From: VanCutsem, Geoffroy geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com; To: José Bollo jose.bo...@open.eurogiciel.orgmailto:jose.bo...@open.eurogiciel.org; karthik karthik karthikkarthik...@yahoo.inmailto:karthikkarthik...@yahoo.in; Cc: ivi@lists tizen. org ivi@lists.tizen.orgmailto:ivi@lists.tizen.org; Subject: RE: Problem with default ac domain package Sent: Wed, May 21, 2014 12:36:55 PM Based on the package versions being installed, it looks like you're trying to build this for an image that's older than the 3.0-M1 (from July 2013!)... I strongly suspect at this point that there is something not configured properly in your gbs.conf file. You may want to take a look here to see how to set your gbs.conf to build for various Tizen IVI 3.0-Mx milestones: https://wiki.tizen.org/wiki/IVI/GBS_configuration_files_Tizen_IVI -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.orgjavascript:return] On Behalf Of VanCutsem, Geoffroy Sent: Wednesday, May 21, 2014 2:22 PM To: José Bollo; karthik karthik Cc: ivi@listsjavascript:return tizen. org Subject: RE: Problem with default ac domain package Can you share your gbs.conf file with us? Something that may help is to clean the buildroot, i.e. 'gbs lb -A i586 -C' -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.orgjavascript:return] On Behalf Of José Bollo Sent: Wednesday, May 21, 2014 2:10 PM To: karthik karthik Cc: ivi@listsjavascript:return tizen. org Subject: Re: Problem with default ac domain package My suse is using kernel 3.7 and it works well on it. The problem is more probably coming from the toolchain best regards josé On mer, 2014-05-21 at 19:58 +0800, karthik karthik wrote: Hi, Is it the version of linux I am using is the problem you are referring to. I am using ubuntu 12.04 with kernel 3.8.0-29. (to do the build) Is the solution, upgrading of linux kernel like moving to higher version of ubuntu ?? Thanks __ From: José Bollo jose.bo...@open.eurogiciel.orgjavascript:return; To: karthikkarthik...@yahoo.injavascript:return karthikkarthik...@yahoo.injavascript:return; Cc: ivi@listsjavascript:return tizen. org ivi@lists.tizen.orgjavascript:return; Subject: Re: Problem with default ac domain package Sent: Wed, May 21, 2014 11:23:57 AM Looking in it deeper let see that your tools (kernel, rpm) are enough old too not have the l (locking) of Smack. best regards José On mer, 2014-05-21 at 18:12 +0800, karthikkarthik...@yahoo.injavascript:return wrote: Hi, I am trying to build the package ico-uxf-homescreen (doing a local build). While installing the package, I am facing the following problem [ 6s] [1/380] installing boost-license-1.51.0-11.1 [ 6s] [2/380] installing capi-base-common-0.1.0-2.1 [ 6s] [3/380] installing default-ac-domains-0.1-1. [ 6s] error: Not allowed character in access type: l [ 6s] error: Failed to parse manifest for default-ac-domains [ 6s] error: default-ac-domains-0.1-1.3.noarch: install failed [ 6s] exit ... I checked the manifest file in default-ac-domains packages.. //Line with the type as “l” There is a line with type as l. How to solve this problem ?? Thanks ___ IVI mailing list IVI@lists.tizen.orgjavascript:return https://lists.tizen.org/listinfo/ivi ___ IVI mailing list IVI@lists.tizen.orgjavascript:return https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570
RE: Problem with default ac domain package
Can you share your gbs.conf file with us? Something that may help is to clean the buildroot, i.e. 'gbs lb -A i586 -C' -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of José Bollo Sent: Wednesday, May 21, 2014 2:10 PM To: karthik karthik Cc: ivi@lists tizen. org Subject: Re: Problem with default ac domain package My suse is using kernel 3.7 and it works well on it. The problem is more probably coming from the toolchain best regards josé On mer, 2014-05-21 at 19:58 +0800, karthik karthik wrote: Hi, Is it the version of linux I am using is the problem you are referring to. I am using ubuntu 12.04 with kernel 3.8.0-29. (to do the build) Is the solution, upgrading of linux kernel like moving to higher version of ubuntu ?? Thanks __ From: José Bollo jose.bo...@open.eurogiciel.org; To: karthikkarthik...@yahoo.in karthikkarthik...@yahoo.in; Cc: ivi@lists tizen. org ivi@lists.tizen.org; Subject: Re: Problem with default ac domain package Sent: Wed, May 21, 2014 11:23:57 AM Looking in it deeper let see that your tools (kernel, rpm) are enough old too not have the l (locking) of Smack. best regards José On mer, 2014-05-21 at 18:12 +0800, karthikkarthik...@yahoo.in wrote: Hi, I am trying to build the package ico-uxf-homescreen (doing a local build). While installing the package, I am facing the following problem [ 6s] [1/380] installing boost-license-1.51.0-11.1 [ 6s] [2/380] installing capi-base-common-0.1.0-2.1 [ 6s] [3/380] installing default-ac-domains-0.1-1. [ 6s] error: Not allowed character in access type: l [ 6s] error: Failed to parse manifest for default-ac-domains [ 6s] error: default-ac-domains-0.1-1.3.noarch: install failed [ 6s] exit ... I checked the manifest file in default-ac-domains packages.. //Line with the type as “l” There is a line with type as l. How to solve this problem ?? Thanks ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Problem with default ac domain package
Based on the package versions being installed, it looks like you're trying to build this for an image that's older than the 3.0-M1 (from July 2013!)... I strongly suspect at this point that there is something not configured properly in your gbs.conf file. You may want to take a look here to see how to set your gbs.conf to build for various Tizen IVI 3.0-Mx milestones: https://wiki.tizen.org/wiki/IVI/GBS_configuration_files_Tizen_IVI -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of VanCutsem, Geoffroy Sent: Wednesday, May 21, 2014 2:22 PM To: José Bollo; karthik karthik Cc: ivi@lists tizen. org Subject: RE: Problem with default ac domain package Can you share your gbs.conf file with us? Something that may help is to clean the buildroot, i.e. 'gbs lb -A i586 -C' -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of José Bollo Sent: Wednesday, May 21, 2014 2:10 PM To: karthik karthik Cc: ivi@lists tizen. org Subject: Re: Problem with default ac domain package My suse is using kernel 3.7 and it works well on it. The problem is more probably coming from the toolchain best regards josé On mer, 2014-05-21 at 19:58 +0800, karthik karthik wrote: Hi, Is it the version of linux I am using is the problem you are referring to. I am using ubuntu 12.04 with kernel 3.8.0-29. (to do the build) Is the solution, upgrading of linux kernel like moving to higher version of ubuntu ?? Thanks __ From: José Bollo jose.bo...@open.eurogiciel.org; To: karthikkarthik...@yahoo.in karthikkarthik...@yahoo.in; Cc: ivi@lists tizen. org ivi@lists.tizen.org; Subject: Re: Problem with default ac domain package Sent: Wed, May 21, 2014 11:23:57 AM Looking in it deeper let see that your tools (kernel, rpm) are enough old too not have the l (locking) of Smack. best regards José On mer, 2014-05-21 at 18:12 +0800, karthikkarthik...@yahoo.in wrote: Hi, I am trying to build the package ico-uxf-homescreen (doing a local build). While installing the package, I am facing the following problem [ 6s] [1/380] installing boost-license-1.51.0-11.1 [ 6s] [2/380] installing capi-base-common-0.1.0-2.1 [ 6s] [3/380] installing default-ac-domains-0.1-1. [ 6s] error: Not allowed character in access type: l [ 6s] error: Failed to parse manifest for default-ac-domains [ 6s] error: default-ac-domains-0.1-1.3.noarch: install failed [ 6s] exit ... I checked the manifest file in default-ac-domains packages.. //Line with the type as “l” There is a line with type as l. How to solve this problem ?? Thanks ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: [Tizen IVI 3.0] Compile Opencv with Qt
+1 on enabling the Qt-OpenCV bits. -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Rees, Kevron Sent: Thursday, May 15, 2014 6:40 PM To: Philippe Coval Cc: ivi@lists.tizen.org Subject: Re: [Tizen IVI 3.0] Compile Opencv with Qt Any update on this? I just pushed the new version of opencv 2.4.9 to IVI. I wonder if I should enable the Qt-opencv bits. -Kevron On Mon, May 12, 2014 at 5:38 AM, Philippe Coval philippe.co...@open.eurogiciel.org wrote: On 05/12/2014 01:01 PM, Tomasz Olszak wrote: 2014-05-12 10:53 GMT+02:00 Orti Senderos osende...@vicomtech.org: Hello, Thanks for your help. Now I can show the window with the image using opencv with Qt. But it is not stable for me. I can show it twice out of 5 attempts. The other 3 times the terminal gets block. I get this two warnings every time, even when the image is shown. This plugin does not support propagatesizehints() [...] Yes, On latest IVI images Qt applications, especially widget based, are not stable (weston crashes). I know that guys from Tizen:Common used wayland without any issues. Is weston in IVI very different from the one in Common? Hi, Well I've been playing with qtwayland lately on Tizen:Common and I can say qt is there but I am not that sure it's fully supported ie, try to install qt5-qttools-qtdesigner /usr/lib64/qt5/bin/designer hit menu/ Quit weston crashes ... At least this happened to me last week On the otherside qtquick/qml seems ok even with xdg support as reported there : https://www.youtube.com/watch?v=pY_XXvKc_0E For now I am focusing on how to get latest qt integrated in Tizen:Common image and maybe will raise some bugs and produce some traces Regards and see you online #qt-tizen if needed -- mailto:philippe.co...@eurogiciel.fr -- gpg:0x467094BC xmpp:philippe.coval@gmail.com https://dockr.eurogiciel.fr/blogs/embedded/author/pcl/ . ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: [Tizen IVI 3.0] Text editor
Hi Orti, I’m personally using ‘vim’, not the most intuitive one but at least it’s readily available. There is no Graphical text editor as far as I know and I don’t know how easily it would be to add it yourself (both geany and gedit would require the gnome libraries which are not available in Tizen IVI). Thanks, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Orti Senderos Sent: Tuesday, May 20, 2014 3:04 PM To: ivi@lists.tizen.org Subject: [Tizen IVI 3.0] Text editor Hello, Does someone know if there is a text editor similar to geany or gedit for Tizen IVI? I am using the last new milestone preview: https://wiki.tizen.org/wiki/IVI/Tizen-IVI_3.0-M2-March2014. Thanks in advance, Orti Senderos Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Bluetooth device connection problem on ivi
Hi Kongling, Could you give us more details on your environment, i.e. what Tizen IVI image are you using, what phone are you pairing it with? You may also want to check if it’s not something that’s been reported in our bug tracking system, a quick search gave me this one for example (may or may not be the same): https://bugs.tizen.org/jira/browse/TIVI-2837 Thanks, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of kongling Sent: Monday, May 19, 2014 11:00 AM To: ivi@lists.tizen.org Subject: Bluetooth device connection problem on ivi Hi, I'm trying to connect mobile with the [settings] app,but always get a [unknown exception]. the ivi could discover the mobile. After i clicked the [pair] button,i got a [unknown exception] notice. Is this app's problem or platform's problem? ※It can be connected using [bluetoothctl command line]. thanks, kongling Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: [TizenIVI 3.0]MP3 can not play
Hi Andy, It sounds like you've added the MAD library to your system but what you need is the Gstreamer MAD plugin. That file would be called libgstmad.so (or something like that) and be located in /usr/lib/gstreamer-1.0/. Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy Sent: Monday, May 19, 2014 10:12 AM To: ivi@lists.tizen.org Subject: RE: [TizenIVI 3.0]MP3 can not play Hello everyone Easier would be to either use an earlier version of Tizen with gstreamer v0.10 or acquire libmad MP3 library and add it yourself. I have added libmad.so.0.2.1 to the tizen ivi system,but it does not work. Is there anyting setup necessary? Or is there guideline wiki for this issue? [Error Information] 18:36:10 ivi_box WebProcess[378]: gboolean WebCore::MediaPlayerPrivateGStreamer::handleMessage(GstMessage*)(1076) ERROR: GST_MESSAGE_ERROR 12: Your GStreamer installation is missing a plug-in. (url=file:///opt/usr/media/Sounds/221mp3.mp3) Thank you. Andy From: joel.cl...@intel.commailto:joel.cl...@intel.com To: williamyan...@hotmail.commailto:williamyan...@hotmail.com CC: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org; ning.w.w...@intel.commailto:ning.w.w...@intel.com; kevron.m.r...@intel.commailto:kevron.m.r...@intel.com Subject: RE: [TizenIVI 3.0]MP3 can not play Date: Wed, 14 May 2014 09:14:30 + Rolling back the latest Tizen IVI to gstreamer v0.10 is probably hardest. Easier would be to either use an earlier version of Tizen with gstreamer v0.10 or acquire libmad MP3 library and add it yourself. Regards Joel From: Yang Andy [mailto:williamyan...@hotmail.com] Sent: Wednesday, May 14, 2014 12:47 AM To: Clark, Joel Cc: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org; Wang, Ning W; Rees, Kevron M Subject: RE: [TizenIVI 3.0]MP3 can not play To:Joel I want to play mp3 file on the lastest tizen ivi software. As to gstreamer,is there possibility that fixed this problem if i rollback to gstreamer v0.10 on the lastest tizen ivi software? Could you give some advice no how solve the mp3 decode problem? Thank you. Andy From: joel.cl...@intel.commailto:joel.cl...@intel.com To: kevron.m.r...@intel.commailto:kevron.m.r...@intel.com; ning.w.w...@intel.commailto:ning.w.w...@intel.com CC: williamyan...@hotmail.commailto:williamyan...@hotmail.com; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: [TizenIVI 3.0]MP3 can not play Date: Mon, 12 May 2014 16:20:02 + This reflects the move to a more recent upstream version of gstreamer. MP3 was working with gstreamer v0.10, but is not working with gstreamer 1.x. Nobody has contributed a freely redistributable MP3 decoder for gstreamer 1.x. Regards Joel -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Rees, Kevron Sent: Monday, May 12, 2014 9:07 AM To: Wang, Ning W Cc: Yang Andy; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: Re: [TizenIVI 3.0]MP3 can not play I don't think we have any gstreamer plugins that support the MP3 codec. IIRC, the MAD plugin is not enabled. On Mon, May 12, 2014 at 1:33 AM, Wang, Ning W ning.w.w...@intel.commailto:ning.w.w...@intel.com wrote: Hi Andy, Andy, Do you by any chance run into the issue where the sound card is muted? See https://bugs.tizen.org/jira/browse/TIVI-2799 . You can work around it by running pacmd set-sink-mute 0 false in weston terminal. Thanks, Ning From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy Sent: Monday, May 12, 2014 4:10 PM To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: [TizenIVI 3.0]MP3 can not play Hello everyone When i use below IVI version,i found that MP3(Audio) can not play.MP4(Vedio) is OK. Old version ivi did not have this problem. Do anyone know the reason? [IVI version] tizen_20140422.1_ivi-release-mbr-i586-sdb.raw.bz2 Thank you. Andy ___ IVI mailing list IVI@lists.tizen.orgmailto:IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi ___ IVI mailing list IVI@lists.tizen.orgmailto:IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: ofono/pulseaudio/bluez5
Hi Zoltan, It's great that you have found a solution (even if it's hackish) to meet your immediate demo needs. I would also like that we follow-up on this issue given, as pointed out by Jaska, it *ought* to work. Would you mind filing a bug for this so we can properly track this? Thanks, Geoffroy -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Uimonen, Jaska Sent: Thursday, May 15, 2014 8:39 AM To: Podolyak, Zoltan; Jones, Brian J Cc: ivi@lists.tizen.org Subject: RE: ofono/pulseaudio/bluez5 Hi Zoltan, Why I'm little bit worried here is that, the functionality that you are describing should be already in Tizen IVI images without any modifications. If you make a bluetooth call and connect (or have connected before) a usb headset, you call should be routed automatically. We are testing this almost every day... This is what pulseaudio-module-murphy-ivi and Murphy are there for. br, Jaska From: IVI [ivi-boun...@lists.tizen.org] on behalf of Podolyak, Zoltan [zpodo...@jaguarlandrover.com] Sent: Thursday, May 15, 2014 3:16 AM To: Jones, Brian J Cc: ivi@lists.tizen.org Subject: Re: ofono/pulseaudio/bluez5 Hi guys, I think I figured out a way to get the Bluetooth sound routed through my USB headphones, though it is somewhat hacky. I guess it will do for a demo. There seems to be a ton of pulseaudio settings that either work differently on other distros or just don't work consistently at all. You can apparently set the default sink/source from the default.pahttp://default.pa configuration file, but it will seemingly have no effect on Tizen. The solution provided here also does not seem to work: https://bbs.archlinux.org/viewtopic.php?id=164868 The only way I was able to make it work was by forcing the unloading of the built-in module. udev discovery is usually assigned module index 0 and the built-in audio index 1. So we add the following line to our default.pahttp://default.pa: unload-module 1 This will unload the module containing the built-in audio and bluetooth audio will now be routed through the next available alsa card, our USB headset. We can probably add a complicated udev rule or something or we can just run a pulseaudio test app to try and figure out exactly what's going. Thanks for all your help! Zoltan On Wed, May 14, 2014 at 9:49 AM, Podolyak, Zoltan zpodo...@jaguarlandrover.commailto:zpodo...@jaguarlandrover.com wrote: Yes, this is true. It's definitely not started by initiating an audio session through Bluetooth. I then tried searching in the source itself for how it's being started and the only place I found is the area around this: /webkit- efl/Source/WebCore/platform/audio/gstreamer/AudioFileReaderGStreamer .cpp This will initiate a new DBUS session somewhere down deep that will presumably launch pulse. As far as I can tell though, this code is not manipulated by any part of the Bluez/ofono pair. Nor should it be. Zoltan On Wed, May 14, 2014 at 9:38 AM, Jones, Brian J brian.j.jo...@intel.commailto:brian.j.jo...@intel.com wrote: On a quick side note, to my knowledge pulseaudio is never up at boot. This is intentional as it helps speed up the boot time. PulseAudio should however be launched when requested, I think there is an issue with it not being started for phone related tasks ATM. From: IVI [mailto:ivi-boun...@lists.tizen.orgmailto:ivi- boun...@lists.tizen.org] On Behalf Of Podolyak, Zoltan Sent: Wednesday, May 14, 2014 9:16 AM To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: Fwd: ofono/pulseaudio/bluez5 Hello Jaska, Thanks for your reply. I will try to be a bit more specific about what my problem is. I'm using the Plantronics_Plantronics_C420 USB headset with microphone. I'm aware that there's no pre-amp on the NDiS. It actually took me quite a while to just get the system to use the headset for our Music Player app. What I ended up doing is setting these settings in my /etc/pulse/client.conf file. default-sink = alsa_output.usb-Plantronics_Plantronics_C420-00- C420.analog-stereo default-source = alsa_input.usb-Plantronics_Plantronics_C420-00- C420.analog-mono With this setting, our Music Player uses the USB headset. I also verified the microphone with alsa tools such as aplay/arecord. This works fine. I'm definitely using default.pahttp://default.pa when loading through the service file. Here's what it looks like: [Unit] Description=pulseaudio sound server [Service] ExecStart=/usr/bin/su app -c DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/5000/dbus/user_bus _socket /usr/bin/pulseaudio --start --log-target=syslog Restart=always [Install] WantedBy=multi-user.target So it's being loaded exactly how it would be loaded by webkit. My problem is, that when trying to make a call through my Bluetooth paired device, the audio still
RE: [TizenIVI 3.0]Question about WebApplication Install on the wayland
Hi Andy, I would agree with Paul, it's best to use wrt-installer if you can to install/remove applications. If your application is written in HTML5/JS, there is Tizen Device API for that too: - tizen.package API: https://developer.tizen.org/dev-guide/2.2.1/org.tizen.web.device.apireference/tizen/package.html If you want an example on how such Web API is used, take a look here: https://review.tizen.org/git/?p=profile/ivi/Modello_Appmanager.git;a=tree;h=refs/heads/tizen;hb=refs/heads/tizen Thanks, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Hanchett, Paul Sent: Monday, April 28, 2014 5:47 PM To: Yang Andy Cc: ivi@lists.tizen.org Subject: Re: [TizenIVI 3.0]Question about WebApplication Install on the wayland Why not just spawn a call to wrt-installer? Duplicating something the system already does, could lead to a fragile design and there's significant risk-- You may not have access to all of the relevant data structures (both knowledge and execution privilege), there's always the possibility that a bug in your code could kill the system, and worst you potentially have to play catch-up if the install process changes. Just some thoughts... :-) Paul Paul Hanchett --- Infotainment Engineer MSX on behalf of Jaguar Land Rover One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, Oregon, 97204 Email: phanc...@jaguarlandrover.commailto:phanc...@jaguarlandrover.com --- Business Details: Jaguar Land Rover Limited Registered Office: Abbey Road, Whitley, Coventry CV3 4LF Registered in England No: 1672070 On Mon, Apr 28, 2014 at 1:27 AM, Yang Andy williamyan...@hotmail.commailto:williamyan...@hotmail.com wrote: Hi Ning I want to design software architecture as below: 1.Put web application on the folder. 2.Develop a applcation which will display web application Icon or name from the folder. 3.When user click the selected application icon ,i will do some action similar [wrt-installer] to insatll web application. The question is that whether i can design function similar wrt-installer or not. For example i can write some script to simulate wrt-installer. Could you give me some advice? Thank you. Andy From: ning.w.w...@intel.commailto:ning.w.w...@intel.com To: williamyan...@hotmail.commailto:williamyan...@hotmail.com; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: [TizenIVI 3.0]Question about WebApplication Install on the wayland Date: Mon, 28 Apr 2014 07:52:59 + Hi Andy, How could you browse files in a folder? A file explorer? To my knowledge, it's not available in IVI yet. So no way to install a web app by double click either. Thanks, Ning From: IVI [mailto:ivi-boun...@lists.tizen.orgmailto:ivi-boun...@lists.tizen.org] On Behalf Of Yang Andy Sent: Monday, April 28, 2014 3:33 PM To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: [TizenIVI 3.0]Question about WebApplication Install on the wayland Hello everyone I have one question about WebApplication Install on the wayland. At present,we have to use command [wrt-installer] to install web application on the wayland terminal. Is there method which can install web application by double click the application icon on the folder? or is there a plan that will add this function by TizenIVI community? [TizenIVI version] 3.0 Thank you. Andy ___ IVI mailing list IVI@lists.tizen.orgmailto:IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Web browser on tizen ivi
Can you explain a bit more where this error is occurring, I have not seen it myself. I typically launch MiniBrowser from the Weston-terminal window (as ‘app’ user). Could it be that you were trying to do this from a virtual console or an SSH session? Can you let me know what image you are using? Thanks, Geoffroy From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of ismail yildiz Sent: Thursday, April 24, 2014 10:04 AM To: Olivier Delbeke Cc: ivi@lists.tizen.org Subject: Re: Web browser on tizen ivi Anybody have already resolved this problem ?? 2014-04-23 15:27 GMT+02:00 Olivier Delbeke olivier.delb...@awtce.bemailto:olivier.delb...@awtce.be: Hi Ismail, You can get rid of the Could not connect to Wayland display error by executing export WAYLAND_DISPLAY=wayland-0 Then, executing MiniBrowser should work (it works for me, as user 'app'). Best regards, Olivier [Inactive hide details for ismail yildiz ---04/23/2014 02:59:08 PM---ismail yildiz ismail.yildi...@gmail.com]ismail yildiz ---04/23/2014 02:59:08 PM---ismail yildiz ismail.yildi...@gmail.commailto:ismail.yildi...@gmail.com ismail yildiz ismail.yildi...@gmail.commailto:ismail.yildi...@gmail.com Sent by: IVI ivi-boun...@lists.tizen.orgmailto:ivi-boun...@lists.tizen.org 04/23/2014 02:59 PM To ivi@lists.tizen.orgmailto:ivi@lists.tizen.org cc Subject Web browser on tizen ivi Hi all, Someone have a web browser functional on tizen ? Because when I launch chromium-browser I have the sandbox issue ( usr/lib/chromium/chrome --no-sandbox ) When I launch Minibrowser, I have a efl problem : ecore_wl ecore_wl.c:173 ecore_wl_init() Could not connect to Wayland display ewebkit2 /home/abuild/rpmbuild/BUILD/webkit2-efl-123997_0.12.1/Source/WebKit2/UIProcess/API/efl/ewk_main.cpp:96 ewk_init() could not init ecore_wl. ___ IVI mailing list IVI@lists.tizen.orgmailto:IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi This mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient, please note that any review, dissemination, disclosure, alteration, printing, copying or transmission of this mail and/or any file transmitted with it, is strictly prohibited and may be unlawful. If you have received this mail by mistake, please immediately notify the sender as well as our mail administrator at postmas...@aweurope.bemailto:postmas...@aweurope.be, and permanently destroy the original as well as any copy thereof. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: ozone-wayland installation
Thanks Qiang for clarifying this. What is gbp and how are .gbs.conf and .gbp.conf different? Thanks, Geoffroy From: Zhang, Qiang Z Sent: Monday, April 14, 2014 4:46 AM To: VanCutsem, Geoffroy; maximouton . Cc: ivi@lists.tizen.org Subject: RE: ozone-wayland installation Hi Maximilien and Geoffroy, No need to rename .gbp.conf as .gbs.conf, and .gbp.conf is for gbp used. I have tried in my local machine, I found it's a little hack in packaging/rpm/gbp-flat-tree.sh, which hard code and depend on a src directory on top of ozone-wayland. So, the following command works: $ git clone https://github.com/01org/ozone-wayland.git src/ozone-wayland $ cd src/ozone-wayland/ $ gbs build --packaging-dir=packaging/rpm -A i586 Thanks Qiang From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of VanCutsem, Geoffroy Sent: Monday, April 14, 2014 12:38 AM To: maximouton . Cc: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: ozone-wayland installation Hi Maximilien, I'm assuming you're trying to build the git repo that's here: https://github.com/01org/ozone-wayland I've never tried myself (yet) but I've quickly looked at the code in there and noticed that there is a file called .gbp.conf [1] which seems related to the issue you're facing below. If I understand that file correctly, the idea is that it should be picked up by GBS automatically... but for that to happen it should be called '.gbs.conf' (instead of '.gbp.conf'). Can you rename it and try again (you will need to use '--include-all' if you don't commit this name change in your local git). Let us know if that helps! Cheers, Geoffroy [1] https://github.com/01org/ozone-wayland/blob/master/.gbp.conf From: maximouton . [mailto:maximou...@gmail.com] Sent: Sunday, April 13, 2014 5:37 PM To: VanCutsem, Geoffroy Cc: Tiago Vignatti; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: Re: ozone-wayland installation Right. gbs was pointing to the wrong URL. I didn't know where to change it. But still there is a problem may be due to a misconfiguration: gbs -c ~/.gbs.conf build -A i586 --packaging-dir packaging/rpm/ --include-all info: generate repositories ... info: build conf has been downloaded at: /var/tmp/netlab-gbs/tizen.conf info: start building packages from: /home/netlab/Desktop/ozone-wayland (git) 2014-04-13 17:28 +0200 info: prepare sources... info: start export source from: /home/netlab/Desktop/ozone-wayland ... info: Creating (native) source archive chromium.tar from '0b393ca1c4c4074e20a110413cd4b6e4f15267e7' removed '/var/tmp/.gbs_export_5KWF0s/chromium.tar' Creating a new /var/tmp/.gbs_export_5KWF0s/chromium.tar from /home/netlab/src tar: src: Cannot stat: No such file or directory tar: Exiting with failure status due to previous errors error: Couldn't run './gbp-flat-tree.sh': ./gbp-flat-tree.sh returned 2 error: gbsFailed to export packaging files from git tree info: retrieving repo metadata... info: parsing package data... info: building repo metadata ... info: package dependency resolving ... warning: no available packages to build. info: *** Build Status Summary *** === the following packages failed to build because export source files to build environment failed (1) === chromium-35.0.1906.0-0 === Total succeeded built packages: (0) === info: generated html format report: /home/netlab/GBS-ROOT/local/repos/tizen/i586/index.html info: generated RPM packages can be found from local repo: /home/netlab/GBS-ROOT/local/repos/tizen/i586/RPMS info: generated source RPM packages can be found from local repo: /home/netlab/GBS-ROOT/local/repos/tizen/i586/SRPMS info: build logs can be found in: /home/netlab/GBS-ROOT/local/repos/tizen/i586/logs info: build roots located in: /home/netlab/GBS-ROOT/local/BUILD-ROOTS/scratch.i586.* error: gbssome packages failed to be built Note that the folder /home/netlab/src nerver existed. Maximilien 2014-04-11 18:23 GMT+02:00 VanCutsem, Geoffroy geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com: The repo your gbs.conf points to does not exist. You should update it to point at a valid repo (which matches the Tizen image you want to build this for). Geoffroy -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.orgmailto:ivi-boun...@lists.tizen.org] On Behalf Of Tiago Vignatti Sent: Friday, April 11, 2014 6:16 PM To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: Re: ozone-wayland installation Hi, I don't know exactly why you're having this problem; looks more like a network issue or something. In any case, Ozone-Wayland can be seen as a part of Chromium project meaning that targets like Chromium Browser and Crosswalk are actually the ones supposed to be built.. you know, with Ozone-Wayland only you cannot do anything :) But as Joel said, come to #ozone-wayland and we try to track down together what's going on... Tiago On 04/11/2014 10:43 AM, maximouton . wrote: Recently I discovered this interesting project
RE: ozone-wayland installation
Hi Maximilien, I'm assuming you're trying to build the git repo that's here: https://github.com/01org/ozone-wayland I've never tried myself (yet) but I've quickly looked at the code in there and noticed that there is a file called .gbp.conf [1] which seems related to the issue you're facing below. If I understand that file correctly, the idea is that it should be picked up by GBS automatically... but for that to happen it should be called '.gbs.conf' (instead of '.gbp.conf'). Can you rename it and try again (you will need to use '--include-all' if you don't commit this name change in your local git). Let us know if that helps! Cheers, Geoffroy [1] https://github.com/01org/ozone-wayland/blob/master/.gbp.conf From: maximouton . [mailto:maximou...@gmail.com] Sent: Sunday, April 13, 2014 5:37 PM To: VanCutsem, Geoffroy Cc: Tiago Vignatti; ivi@lists.tizen.org Subject: Re: ozone-wayland installation Right. gbs was pointing to the wrong URL. I didn't know where to change it. But still there is a problem may be due to a misconfiguration: gbs -c ~/.gbs.conf build -A i586 --packaging-dir packaging/rpm/ --include-all info: generate repositories ... info: build conf has been downloaded at: /var/tmp/netlab-gbs/tizen.conf info: start building packages from: /home/netlab/Desktop/ozone-wayland (git) 2014-04-13 17:28 +0200 info: prepare sources... info: start export source from: /home/netlab/Desktop/ozone-wayland ... info: Creating (native) source archive chromium.tar from '0b393ca1c4c4074e20a110413cd4b6e4f15267e7' removed '/var/tmp/.gbs_export_5KWF0s/chromium.tar' Creating a new /var/tmp/.gbs_export_5KWF0s/chromium.tar from /home/netlab/src tar: src: Cannot stat: No such file or directory tar: Exiting with failure status due to previous errors error: Couldn't run './gbp-flat-tree.sh': ./gbp-flat-tree.sh returned 2 error: gbsFailed to export packaging files from git tree info: retrieving repo metadata... info: parsing package data... info: building repo metadata ... info: package dependency resolving ... warning: no available packages to build. info: *** Build Status Summary *** === the following packages failed to build because export source files to build environment failed (1) === chromium-35.0.1906.0-0 === Total succeeded built packages: (0) === info: generated html format report: /home/netlab/GBS-ROOT/local/repos/tizen/i586/index.html info: generated RPM packages can be found from local repo: /home/netlab/GBS-ROOT/local/repos/tizen/i586/RPMS info: generated source RPM packages can be found from local repo: /home/netlab/GBS-ROOT/local/repos/tizen/i586/SRPMS info: build logs can be found in: /home/netlab/GBS-ROOT/local/repos/tizen/i586/logs info: build roots located in: /home/netlab/GBS-ROOT/local/BUILD-ROOTS/scratch.i586.* error: gbssome packages failed to be built Note that the folder /home/netlab/src nerver existed. Maximilien 2014-04-11 18:23 GMT+02:00 VanCutsem, Geoffroy geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com: The repo your gbs.conf points to does not exist. You should update it to point at a valid repo (which matches the Tizen image you want to build this for). Geoffroy -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.orgmailto:ivi-boun...@lists.tizen.org] On Behalf Of Tiago Vignatti Sent: Friday, April 11, 2014 6:16 PM To: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: Re: ozone-wayland installation Hi, I don't know exactly why you're having this problem; looks more like a network issue or something. In any case, Ozone-Wayland can be seen as a part of Chromium project meaning that targets like Chromium Browser and Crosswalk are actually the ones supposed to be built.. you know, with Ozone-Wayland only you cannot do anything :) But as Joel said, come to #ozone-wayland and we try to track down together what's going on... Tiago On 04/11/2014 10:43 AM, maximouton . wrote: Recently I discovered this interesting project ozone-wayland. I decided to test it on my platform but when trying to build the rpm on ubuntu 13.10 I get the folowing: gbs -v build -A i586 --packaging-dir packaging/rpm/ info: generate repositories ... debug: fetching http://download.tizen.org/releases/daily/trunk/ivi/latest/repodata/rep omd.xml = /var/tmp/netlab-gbs/gbscachedgb1H6/repomd.xml debug: disable HTTP caching debug: fetching error:(22, 'The requested URL returned error: 404 Not Found') ... Did anybody tried to install ozone-wayland already? ___ IVI mailing list IVI@lists.tizen.orgmailto:IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you
RE: ozone-wayland installation
The repo your gbs.conf points to does not exist. You should update it to point at a valid repo (which matches the Tizen image you want to build this for). Geoffroy -Original Message- From: IVI [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Tiago Vignatti Sent: Friday, April 11, 2014 6:16 PM To: ivi@lists.tizen.org Subject: Re: ozone-wayland installation Hi, I don't know exactly why you're having this problem; looks more like a network issue or something. In any case, Ozone-Wayland can be seen as a part of Chromium project meaning that targets like Chromium Browser and Crosswalk are actually the ones supposed to be built.. you know, with Ozone-Wayland only you cannot do anything :) But as Joel said, come to #ozone-wayland and we try to track down together what's going on... Tiago On 04/11/2014 10:43 AM, maximouton . wrote: Recently I discovered this interesting project ozone-wayland. I decided to test it on my platform but when trying to build the rpm on ubuntu 13.10 I get the folowing: gbs -v build -A i586 --packaging-dir packaging/rpm/ info: generate repositories ... debug: fetching http://download.tizen.org/releases/daily/trunk/ivi/latest/repodata/rep omd.xml = /var/tmp/netlab-gbs/gbscachedgb1H6/repomd.xml debug: disable HTTP caching debug: fetching error:(22, 'The requested URL returned error: 404 Not Found') ... Did anybody tried to install ozone-wayland already? ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Issues in Image creation for i585 for Tizen 2.2.1
Hi Vivek, You have reached us on the IVI (In-Vehicle Infotainment) mailing list so I'm really not sure how many of us have expertise running the mobile image on the emulator. I'd advise you to re-send this to the gene...@lists.tizen.orgmailto:gene...@lists.tizen.org or d...@lists.tizen.orgmailto:d...@lists.tizen.org instead. Cheers, Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Vivek Chandra Amancha Sent: Tuesday, April 08, 2014 9:05 AM To: ivi@lists.tizen.org Subject: Issues in Image creation for i585 for Tizen 2.2.1 Hello, I've compiled Tizen 2.2.1 source code for Tizen Mobile, i586 architecture. The build was successful and I created an image using handset-blackbay.ks file for emulator. After creation of the image I converted the raw platform.img file to QCOW file using following command qemu-img convert -O qcow2 platform.img platform.x86. The image is getting converted to qcow2 format successfully, but when I create an emulator with this qcow2 image the emulator stops at the boot screen, popping message Booting the kernel and doesn't proceed any further. I'm even unable to connect to the shell of the emulator using sdb. I wanted to know where I'm making mistake, whether the procedure followed by me is correct or not for emulator image conversion to qcow2?? Thanks Regards, Vivek. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Launch weston ivi shell - unresponsive homescreen..
Can you try downloading this package too: http://download.tizen.org/releases/daily/tizen/ivi/ivi-release/tizen_20140404.14/repos/ivi/ia32/packages/i686/wayland-devel-1.4.0-1.3.i686.rpm Geoffroy From: karthikkarthik...@yahoo.in [mailto:karthikkarthik...@yahoo.in] Sent: Monday, April 07, 2014 1:19 PM To: VanCutsem, Geoffroy Cc: ivi@lists.tizen.org; s.vorob...@samsung.com; Zhang, Qiang Z; Huang, JunX A Subject: Re: Launch weston ivi shell - unresponsive homescreen.. Hi, Tried to built against a local repo (downloaded rpm’s from the tizen).. I am able to solve the dependencies except one.. === the following packages failed to build due to missing build dependencies (1) === weston: nothing provides pkgconfig(wayland-egl) I downloaded the libwayland-egl rpm package (libwayland-egl-9.2.1-19.39.i686.rpm ) from tizen (path : http://download.tizen.org/releases/daily/tizen/ivi/ivi-release/tizen_20140404.14/repos/ivi/ia32/packages/i686/).. still the dependency is not resolved.. Can you guys help me with this ?? From: karthik karthik karthikkarthik...@yahoo.inmailto:karthikkarthik...@yahoo.in; To: VanCutsem, Geoffroy geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com; Cc: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org ivi@lists.tizen.orgmailto:ivi@lists.tizen.org; s.vorob...@samsung.commailto:s.vorob...@samsung.com s.vorob...@samsung.commailto:s.vorob...@samsung.com; Zhang, Qiang Z qiang.z.zh...@intel.commailto:qiang.z.zh...@intel.com; Huang, JunX A junx.a.hu...@intel.commailto:junx.a.hu...@intel.com; Subject: Re: Launch weston ivi shell - unresponsive homescreen.. Sent: Mon, Apr 7, 2014 4:42:11 AM Thanks Geoffroy for the reply, It looks like gbs does not even reach the remote repo at all. Could it be blocked by a firewall or is there a proxy that you'd still need to configure? Yes, it can be a proxy issue. I will check it.. As you have explained below in quotes The method that you call offline is actually to build the entire stack from scratch (offline) using only a minimal set of tools (bootstrap) that is stored in the 'toolchain' project. What happens in this case is that you're only trying to build weston from the bootstrap repo but you have not yet build all its dependencies and so it fails. If you want to build just one (or a few) packages in 'offline' mode then you should mirror an existing repository locally and use that from your gbs.conf file. Is my understanding correct ? 1) Toolchain project will only have the basic set of rpm's required for building but not all the rpms. So since I am using it, the rpm's which Weston requires are not available for it. 2) So we need to point to the other rpm's that Weston needs to build. 3) This folder is something that I might not be giving properly now. So is it possible to create a separate folder just containing the rpm's (just download the required rpm's) that are required by Weston (listed below..).. Is there a way to point to this folder and build Weston ?? weston: nothing provides expat-devel nothing provides libjpeg-devel nothing provides libvpx-devel nothing provides pam-devel nothing provides pkgconfig(cairo) nothing provides pkgconfig(cairo-egl) = 1.11.3 nothing provides pkgconfig(egl) = 7.10 nothing provides pkgconfig(gbm) nothing provides pkgconfig(gio-2.0) nothing provides pkgconfig(glesv2) nothing provides pkgconfig(glib-2.0) nothing provides pkgconfig(gobject-2.0) nothing provides pkgconfig(libdrm) = 2.4.30 nothing provides pkgconfig(libffi) nothing provides pkgconfig(libsystemd-login) nothing provides pkgconfig(libudev) = 136 nothing provides pkgconfig(mtdev) = 1.1.0 nothing provides pkgconfig(pangocairo) nothing provides pkgconfig(pixman-1) nothing provides pkgconfig(poppler-glib) nothing provides pkgconfig(wayland-client) nothing provides pkgconfig(wayland-egl) nothing provides pkgconfig(wayland-server) Thanks, From: VanCutsem, Geoffroy geoffroy.vancut...@intel.commailto:geoffroy.vancut...@intel.com; To: karthikkarthik...@yahoo.inmailto:karthikkarthik...@yahoo.in karthikkarthik...@yahoo.inmailto:karthikkarthik...@yahoo.in; Cc: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org ivi@lists.tizen.orgmailto:ivi@lists.tizen.org; s.vorob...@samsung.commailto:s.vorob...@samsung.com s.vorob...@samsung.commailto:s.vorob...@samsung.com; Zhang, Qiang Z qiang.z.zh...@intel.commailto:qiang.z.zh...@intel.com; Huang, JunX A junx.a.hu...@intel.commailto:junx.a.hu...@intel.com; Subject: Re: Launch weston ivi shell - unresponsive homescreen.. Sent: Fri, Apr 4, 2014 10:26:42 AM On Fri, 2014-04-04 at 16:47 +0800, karthik karthik wrote: Thanks to all for the replies, Stanislav, Big thanks for the rpm. You rpm worked.. I am able to interact with the screen.. But I am not able to launch the native applications as such. Any reason why I am not able to launch ?? Geoffroy/Qiang, I tried you .gbs.cong file. I have attached the debug
RE: Launch weston ivi shell - unresponsive homescreen..
This file is not in your image, you should clone the Weston git repo, apply the patch there, build a new RPM with the patch in and install it in your image. The workflow looks like this on your development machine: - gbs clone tizen:platform/upstream/Weston - git apply /path/to/where/you/saved/0001-evdev-support-emulator.patch - gbs build -i 586 --include-allu (you may have to tweak your gbs.conf file too if not already done: https://wiki.tizen.org/wiki/IVI/GBS_configuration_files_Tizen_IVI) - Transfer the new RPM to your image - Install it there (zipper in --oldpackage your-new-weston.rpm Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of karthikkarthik...@yahoo.in Sent: Tuesday, April 01, 2014 5:53 AM To: Stanislav Vorobiov; ivi@lists.tizen.org Subject: Re: Launch weston ivi shell - unresponsive homescreen.. Hi, Can some one help me with the location of file evdev.c to run the patch.. I tried Locate evdev.c And Find / -name evdev.c Both didn't give a result.. I checked in /usr/src.. I couldn't find it there too.. Thanks.. From: Stanislav Vorobiov s.vorob...@samsung.commailto:s.vorob...@samsung.com; To: karthik karthik karthikkarthik...@yahoo.inmailto:karthikkarthik...@yahoo.in; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org ivi@lists.tizen.orgmailto:ivi@lists.tizen.org; Subject: Re: Launch weston ivi shell - unresponsive homescreen.. Sent: Mon, Mar 31, 2014 10:41:35 AM Hi, It's possibly because of this - https://bugs.tizen.org/jira/browse/TIVI-2248 Currently emulator's touchscreen has problems working with weston, so this was worked around by the patch which is attached to that ticket. Since you've built weston yourself (or used latest RPM) you didn't apply the patch and that's why homescreen is unresponsive. On 03/31/2014 01:57 PM, karthik karthik wrote: Hi, I tried to install weston ivi shell in tizen emulator. I am able to get the ivi screen with the homescreen button. But I am not able to launch/move to a new screen. It is as if the whole screen is inactive.. I installed the rpm packages for ivi shell from tizen.. Can someone help me in this ?? --- *From: * Wang, Ning W ning.w.w...@intel.comjavascript:return; *To: * karthik karthik karthikkarthik...@yahoo.injavascript:return; ivi@lists.tizen.orgjavascript:return ivi@lists.tizen.orgjavascript:return; *Subject: * RE: RE: RE: RE: Error installing wayland.. in tizen emulator. *Sent: * Mon, Mar 31, 2014 6:51:10 AM It should not cause any issue. You can run “rpm -qa | grep wayland” to double check the version. Thanks, Ning *From:*karthik karthik [mailto:karthikkarthik...@yahoo.injavascript:return] *Sent:* Monday, March 31, 2014 2:44 PM *To:* Wang, Ning W; ivi@lists.tizen.orgjavascript:return *Subject:* Re: RE: RE: RE: Error installing wayland.. in tizen emulator. Thanks , But will the different architecture problem not cause any issues. Like, how to be sure that the latest installed wayland is used ?? Thanks, --- *From: *Wang, Ning W ning.w.w...@intel.comjavascript:return javascript:return; *To: *karthik karthik karthikkarthik...@yahoo.injavascript:return javascript:return; ivi@lists.tizen.orgjavascript:return javascript:return ivi@lists.tizen.orgjavascript:return javascript:return; *Subject: *RE: RE: RE: Error installing wayland.. in tizen emulator. *Sent: *Mon, Mar 31, 2014 6:31:08 AM Oops.. I only saw the arch error at the first glance. In case you are upgrading a package, “-Uvh” should be used instead of “-ivh”. Thanks, Ning *From:*karthik karthik [mailto:karthikkarthik...@yahoo.injavascript:return javascript:return] *Sent:* Monday, March 31, 2014 2:16 PM *To:* Wang, Ning W; ivi@lists.tizen.orgjavascript:return javascript:return *Subject:* Re: RE: RE: Error installing wayland.. in tizen emulator. Hi, I am getting this error when I use the ignorearch option.. Smackfs isn't mounted at (null). Going to the image build mode. Preparing... file /usr/lib/libwayland-client.so.0 from install of libwayland-client-1.4.0-10.29.i686 conflicts with file from package libwayland-client-1.3.0-10.1.i686 Thanks.
Re: Launch weston ivi shell - unresponsive homescreen..
On Tue, 2014-04-01 at 19:07 +0800, karthik karthik wrote: Hi, Thanks for the reply.. is it not just possible to move the source code from repository from which the code was pulled in, make the changes to evdev.c as per the patch and build it in the tizen emulator using make.. Is there any problem in this approach ?? That should work too. You'll have to install the build tools and build dependencies on the image. I would also advise to look at the spec file (%build section) to see what options are used when building that package. __ From: VanCutsem, Geoffroy geoffroy.vancut...@intel.com; To: karthikkarthik...@yahoo.in karthikkarthik...@yahoo.in; Stanislav Vorobiov s.vorob...@samsung.com; ivi@lists.tizen.org ivi@lists.tizen.org; Subject: RE: Launch weston ivi shell - unresponsive homescreen.. Sent: Tue, Apr 1, 2014 8:56:36 AM This file is not in your image, you should clone the Weston git repo, apply the patch there, build a new RPM with the patch in and install it in your image. The workflow looks like this on your development machine: - gbs clone tizen:platform/upstream/Weston - git apply /path/to/where/you/saved/0001-evdev-support-emulator.patch - gbs build -i 586 --include-allu (you may have to tweak your gbs.conf file too if not already done: https://wiki.tizen.org/wiki/IVI/GBS_configuration_files_Tizen_IVI) - Transfer the new RPM to your image - Install it there (zipper in --oldpackage your-new-weston.rpm Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of karthikkarthik...@yahoo.in Sent: Tuesday, April 01, 2014 5:53 AM To: Stanislav Vorobiov; ivi@lists.tizen.org Subject: Re: Launch weston ivi shell - unresponsive homescreen.. Hi, Can some one help me with the location of file evdev.c to run the patch.. I tried Locate evdev.c And Find / -name evdev.c Both didn't give a result.. I checked in /usr/src.. I couldn't find it there too.. Thanks.. __ From:Stanislav Vorobiov s.vorob...@samsung.com; To: karthik karthik karthikkarthik...@yahoo.in; ivi@lists.tizen.org ivi@lists.tizen.org; Subject: Re: Launch weston ivi shell - unresponsive homescreen.. Sent: Mon, Mar 31, 2014 10:41:35 AM Hi, It's possibly because of this - https://bugs.tizen.org/jira/browse/TIVI-2248 Currently emulator's touchscreen has problems working with weston, so this was worked around by the patch which is attached to that ticket. Since you've built weston yourself (or used latest RPM) you didn't apply the patch and that's why homescreen is unresponsive. On 03/31/2014 01:57 PM, karthik karthik wrote: Hi, I tried to install weston ivi shell in tizen emulator. I am able to get the ivi screen with the homescreen button. But I am not able to launch/move to a new screen. It is as if the whole screen is inactive.. I installed the rpm packages for ivi shell from tizen.. Can someone help me in this ?? --- *From: * Wang, Ning W ning.w.w...@intel.com; *To: * karthik karthik karthikkarthik...@yahoo.in; ivi@lists.tizen.org ivi@lists.tizen.org; *Subject: * RE: RE: RE: RE: Error installing wayland.. in tizen emulator. *Sent: * Mon, Mar 31, 2014 6:51:10 AM It should not cause any issue. You can run “rpm -qa | grep wayland” to double check the version. Thanks, Ning *From:*karthik karthik [mailto:karthikkarthik...@yahoo.in] *Sent:* Monday, March 31, 2014 2:44 PM *To:* Wang, Ning W; ivi@lists.tizen.org *Subject:* Re: RE: RE: RE: Error installing wayland.. in tizen emulator. Thanks , But will the different architecture problem not cause any issues. Like, how to be sure that the latest installed wayland is used ?? Thanks, --- *From: *Wang, Ning W ning.w.w...@intel.com javascript:return; *To: *karthik karthik karthikkarthik...@yahoo.in javascript:return; ivi@lists.tizen.org javascript:return ivi@lists.tizen.org javascript:return; *Subject: *RE: RE: RE: Error installing wayland.. in tizen emulator. *Sent: *Mon, Mar 31, 2014 6:31:08 AM Oops.. I only saw the arch error at the first glance. In case you are upgrading
Re: How to launch a native app ?
Hi Olivier, On Wed, 2014-03-19 at 17:59 +0100, Olivier Delbeke wrote: Dear all, I'm trying to make a hello world for Tizen IVI (yes, I have high hopes). Basically, I created a new project, I took the dialler's code as base, stripped it down to a maximum, created a CMakeList.txt, a spec file, an xml-file, an icon, built the project with gbs and finally installed the resulting rpm on the target. The problem now is to know how to run it. Executing it directly returns ecore_wl_init() Could not connect to Wayland display Were you trying to start the app as root by any chance? This is typically the error you'd get when doing so. I'd recommend you try to run it from the weston-terminal (as the normal 'app' user) at least initially. Then we can look at how to add it to the ICO HomeScreen (desktop file) and launch_app xxx..hello returns ... launch failed (great!). I assume that the right way is to use launch_app (because other native apps seem to be launched this way), but is there any way to get any log out of it ? Did it fail to find my application ? (I create a .desktop file in /usr/share/applications, but does it need anything else ?) Did my application crash ? Did I remove too much code from the dialer and did my application fail to register itself correctly ? ... I can't find anything useful in /var/log, in the output of journalctl or even in the output of strace. How can I debug this (if possible, other than putting tons of printf in launch_app) ? More generally, is there any documentation about how to write a native app ? About what 'launch_app' does ? About getting logs ? Thank you and best regards, Olivier ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: How to launch a native app ?
Hi Olivier, (should have added more pointers ealier on) On Wed, 2014-03-19 at 17:59 +0100, Olivier Delbeke wrote: Dear all, I'm trying to make a hello world for Tizen IVI (yes, I have high hopes). Basically, I created a new project, I took the dialler's code as base, stripped it down to a maximum, created a CMakeList.txt, a spec file, an xml-file, an icon, built the project with gbs and finally installed the resulting rpm on the target. The problem now is to know how to run it. Executing it directly returns ecore_wl_init() Could not connect to Wayland display and launch_app xxx..hello returns ... launch failed (great!). I mentionned that you should not be root for this but there may be other things that cause this issue. I'm thinking specifically that if the SMACK label is not correct then this could be a problem. A quick test for this would be to add 'security=none' to your kernel command-line and try again. Note that you really *don't* want to keep running with security turned off and so we'd need to look at the exact problem for your app. I assume that the right way is to use launch_app (because other native apps seem to be launched this way), but is there any way to get any log out of it ? We have some info about logging on Tizen IVI on this page: https://wiki.tizen.org/wiki/IVI/Enable_Logging I don't know if this will yield to any result for your app but please do let me know (specifically, I'm not familiar as to whether you'd need to do anything in your app to get additional info). Did it fail to find my application ? (I create a .desktop file in /usr/share/applications, but does it need anything else ?) Did my application crash ? Did I remove too much code from the dialer and did my application fail to register itself correctly ? ... I can't find anything useful in /var/log, in the output of journalctl or even in the output of strace. How can I debug this (if possible, other than putting tons of printf in launch_app) ? More generally, is there any documentation about how to write a native app ? About what 'launch_app' does ? About getting logs ? We have the wiki page above regarding getting logs, any suggestion for enhancing it is more than welcome. We don't have a wiki page for writing a native app and we typically point people at the 'lemolo' app as a starting point (which is exactly what you did). Another good source of information is the presentation that Dominig Ar Foll presented at FOSDEM this year entitled: 'A multi-user App Framework' (there is a link to it here: https://wiki.tizen.org/wiki/IVI#FOSDEM.2714) Cheers, Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: No apps on snapshot images
Hi Olivier, I haven't played that much with the ICO HomeScreen yet so bear with me if my explanations are inaccurate or incomplete (and I hope others on the mailing will correct me if that's the case) I believe this may be a side-effect of the fact we load the 'ExampleSource' plugin in AMB by default (see /etc/ambd/config). This plugin provides random data and tends to put the overall system in DrivingMode which means many applications cannot be launched. Here is what I have quickly tried this morning on the latest daily preview: - mv /etc/ambd/config /etc/ambd/config.orig - cp /etc/ambd/config.tizen /etc/ambd/config - Edit /etc/ambd/config and comment out the section related to 'ExampleSource' - Reboot the system Let me know if that helps, Geoffroy On Mon, 2014-03-17 at 10:25 +0100, Olivier Delbeke wrote: Hi all, The result I get when I install the daily snapshot images is quite disappointing. For example, with tizen_20140312.12_ivi-mbr-i586-sdb.raw, I get a screen with : - a black top bar with the time (Japan time and changing) - a middle section with a sea background (with no icons on it) - a bottom grey bar with two icons : a Play symbol and a kind of numpad symbol with a red 'forbidden' sign on top of it - a working mouse pointer (but clicking anywhere does not have any effect) However, when I look at the detailed test reports, I see that there should be a Settings app, a browser, a phone app, a Multimedia app, ... Why can't I see any of these ? Why is the only thing that my image does is displaying the Japanese time ? What I did : - download the image and dump it on my HDD - boot my target (VTC7110 with a VGA display) = I get a desktop environment where I can run a shell (and other apps using wrt-launcher) - I set up my network configuration (connman settings) - I install the ico-uxf-homescreen as described in the sanity test report - I modify the weston.ini to enable the VGA1 output and to avoid having the display rotated by 90° - I reboot and get what I described above What else should I do ? Thanks, Olivier, ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: No apps on snapshot images
On Mon, 2014-03-17 at 15:32 +, VanCutsem, Geoffroy wrote: It could be related to dual-screen... I'm going to try and load the exact same image that you're using to have a look at this myself. Hmmm... I've just tried tizen_20140312.12 and tizen_20140314.6 on my VTC7120 and I'm getting the same problem than you. It actually works fine on a different platform that I have which uses HDMI (using tizen_20140314.6)... maybe this is related to using the VGA screen... I need to investigate this more. This second screen you're seeing is the LVDS output. This is something specific to the VTC7120. You can disable it as described here https://wiki.tizen.org/wiki/IVI/IVI_January_15,_3.0-M2-EOY#Disabling_the_LVDS_output_for_the_Nexcom_VTC7120_platforms That bit worked for me. Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: No apps on snapshot images
On Mon, 2014-03-17 at 17:03 +0100, Olivier Delbeke wrote: Hi Geoffroy, Thank you again. Applying the recommended patch (=setting [output] name=LVDS1 mode=off instead of commenting the whole output definition) results in a small improvement : now, the mouse cursor cannot escape the screen any more. But there are still no icons or apps. In addition, I also disabled the 'ExampleSource' plugin in AMB (/etc/ambd/config), but it didn't get any better. Executing for example launch_app org.tizen.dialer results in ... successfully launched but there is still nothing on the display. The binary itself is running. I'm starting to wonder if this is not something specific to using the VGA port... let's see if the ICO experts can help us clarify if they have tested it and if there was any specific configuration required. Would my journalctl log be useful to you ? I don't know but it can't hurt if you send it across so I can take a look Thank you and best regards, Olivier Inactive hide details for VanCutsem,VanCutsem, Geoffroy ---03/17/2014 04:33:33 PM---VanCutsem, Geoffroy geoffroy.vancut...@intel.com VanCutsem, Geoffroy geoffroy.vancut...@intel.com 03/17/2014 04:33 PM To Olivier Delbeke olivier.delb...@awtce.be cc 'ivi@lists.tizen.org' ivi@lists.tizen.org Subject Re: No apps on snapshot images Hi Olivier, On Mon, 2014-03-17 at 14:12 +0100, Olivier Delbeke wrote: Hi Geoffroy, Thanks a lot for your help (once again). I applied the patch you recommended but got the same result (unfortunately). Using ps, I can see the following applications are running : HomeScreen, OnScreen, StatusBar, dialer and MediaPlayer. I don't see the MediaPlayer or the dialler, and I'm not sure what HomeScreen, OnScreen and StatusBar are supposed to display (but I have a black topbar with the time, a background image and a grey bottom bar with two icons). Is there a possibility to know in which state the running applications are ? (i.e. if they are hidden by AMB ? If they are drawing something ?) I don't know but this is a very good question... I hope someone can fill us in on that. By the way, I also modified all *.desktop files I found and all replaced NoDisplay=true by NoDisplay=false but it also didn't help (I saw in the test results that only apps with this flag should be displayed). Could my problem be related to some kind of dual-screen configuration ? I see that I can put my mouse cursor out of the screen on the right side. Maybe that's where all the icons and apps are. My weston.ini only has one output enabled (VGA1), however. I played with the setting displayno setting but got no improvement. It could be related to dual-screen... I'm going to try and load the exact same image that you're using to have a look at this myself. This second screen you're seeing is the LVDS output. This is something specific to the VTC7120. You can disable it as described here https://wiki.tizen.org/wiki/IVI/IVI_January_15,_3.0-M2-EOY#Disabling_the_LVDS_output_for_the_Nexcom_VTC7120_platforms Best regards, Olivier Inactive hide details for VanCutsem,VanCutsem, Geoffroy ---03/17/2014 01:20:46 PM---VanCutsem, Geoffroy geoffroy.vancut...@intel.com VanCutsem, Geoffroy geoffroy.vancut...@intel.com 03/17/2014 01:20 PM To Olivier Delbeke olivier.delb...@awtce.be cc 'ivi@lists.tizen.org' ivi@lists.tizen.org Subject Re: No apps on snapshot images Hi Olivier, I haven't played that much with the ICO HomeScreen yet so bear with me if my explanations are inaccurate or incomplete (and I hope others on the mailing will correct me if that's the case) I believe this may be a side-effect of the fact we load the 'ExampleSource' plugin in AMB by default (see /etc/ambd/config). This plugin provides random data and tends to put the overall system in DrivingMode which means many applications cannot be launched. Here is what I have quickly tried this morning on the latest daily preview: - mv /etc/ambd/config /etc/ambd/config.orig - cp /etc/ambd/config.tizen /etc/ambd/config - Edit /etc/ambd/config and comment out the section related to 'ExampleSource' - Reboot the system Let me know if that helps, Geoffroy On Mon, 2014-03-17 at 10:25 +0100, Olivier Delbeke wrote: Hi all, The result I get when I install the daily snapshot images is quite disappointing. For example, with tizen_20140312.12_ivi-mbr-i586-sdb.raw, I get a screen with : - a black top bar with the time
Re: Problem cloning Tizen source
On Thu, 2014-03-13 at 06:42 +, Lv, RuiX wrote: I’m considering summarizing these issues and publishing an official tips and heads-up on source.tizen.org. I think it would be very useful to have that documented on the official Tizen wiki. I'd recommend you add such info (esp. related to tsock and GIT_SSL_NO_VERIFY) to the main wiki page, i.e.: https://source.tizen.org/documentation/developer-guide/cloning-tizen-source [Rui] Good point. That makes the two of us! I'm considering publishing it in an independent page. I'm not sure who can edit the original page but if you cannot (I cannot), we should create a JIRA issue so that the right folks can do it. I think it's preferable over publishing an independant page if that's the only additional piece of information. Cheers, Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: Problem cloning Tizen source
Hi Rui, On Wed, 2014-03-12 at 09:19 +, Lv, RuiX wrote: Hi Oliver, VanCutsem, all Tizen enthusiasts, Thanks a lot for your active feedback. I’m here sharing some tips and heads-up regarding cloning Tizen source: Regarding SSH configuration file == l When working at home, you don’t need any proxy, so the ssh configuration files for all Linux distribution versions can be unified as follows: Host tizen review.tizen.org Hostname review.tizen.org IdentityFile ~/.ssh/id_rsa User Gerrit_Username Port 29418 l When working in a corporate environment, for example, inside intel, proxy line is must-have, and you need to make a choice based on your Linux distribution versions. For Ubuntu, openSUSE, and CentOS, append “ProxyCommand nc -X5 -x Proxy Address:Port %h %p, whereas for Fedora, append “ProxyCommand nc --proxy-type socks4 --proxy Proxy Address:Port %h %p”. Regarding Cloning through ssh/http == l PRC users may find it tricky to “communicate” with google server when downloading the Repo tool, initializing the repo, and synchronizing Tizen source. Typical confusion is: No error message is displayed when downloading the Repo tool by using curl, but when proceeding to **repo init**, users may find the “hidden” issue come out of nowhere. In this case, keep in mind that this is an “communication” issue between PRC users and google, just clear your head and try running the commands with tsocks, some examples are shown below: $ tsocks curl http://commondatastorage.googleapis.com/git-repo-downloads/repo ~/bin/repo $ tsocks repo init -u ssh://Username@review.tizen.org:29418/scm/manifest -b tizen -m ivi.xml $ tsocks repo init -u https://Username:HTTPS_Password@review.tizen.org/gerrit/p/scm/manifest -b tizen -m ivi.xml l When initializing and cloning through HTTP, users may be blocked by the “server certificate verification” issue, run the following command and try again: $ export GIT_SSL_NO_VERIFY=1 That's exactly the problem I hit when trying to clone via HTTPS this morning... thanks for the note! If you guys have other confusions, please feel free to raise it. I’m considering summarizing these issues and publishing an official tips and heads-up on source.tizen.org. I think it would be very useful to have that documented on the official Tizen wiki. I'd recommend you add such info (esp. related to tsock and GIT_SSL_NO_VERIFY) to the main wiki page, i.e.: https://source.tizen.org/documentation/developer-guide/cloning-tizen-source Your comments are always more than welcome. Thanks Rui From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Olivier Delbeke Sent: Wednesday, March 12, 2014 4:03 PM To: VanCutsem, Geoffroy Cc: ivi@lists.tizen.org Subject: Re: Problem cloning Tizen source Hi Geoffroy, Thank you. I have not personnally but I know others have tried (and I will try this this morning too). The webkit-efl package is particularly large and it looks suspicious that it's stopping at exactly 1GB. Did 'repo sync' successfully clone all the other projects before that one? Yes, I confirm that all (or nearly all : progress was 880/888) other projects were cloned correctly by 'repo sync'. Olivier Inactive hide details for VanCutsem,VanCutsem, Geoffroy ---03/12/2014 08:55:18 AM---VanCutsem, Geoffroy geoffroy.vancut...@intel.com VanCutsem, Geoffroy geoffroy.vancut...@intel.com 03/12/2014 08:55 AM To Olivier Delbeke olivier.delb...@awtce.be cc ivi@lists.tizen.org ivi@lists.tizen.org Subject Re: Problem cloning Tizen source Hi Olivier, On Wed, 2014-03-12 at 08:20 +0100, Olivier Delbeke wrote: Hi Geoffroy, Thanks a lot for your help. I took my PC at home and there, the SSH connection went just fine (same result as you) and I could finalize the cloning. So the port 29418 must be blocked here by our ICT. We do not have a proxy, so it must be some kind of filtering rule. I will ask them to have a second look. Thanks for confirming that. For the HTTPS problem, I think that the root cause is on Tizen's side. (The message says that the transfer was interrupted by the remote end.) Did someone else try to clone the Tizen IVI source using HTTPS ? I have not personnally but I know others have tried (and I will try this this morning too). The webkit-efl package is particularly large and it looks suspicious that it's stopping at exactly 1GB. Did 'repo sync' successfully clone all the other projects before that one? Best regards, Olivier Inactive hide details for VanCutsem
Re: Problem cloning Tizen source
I am facing the exact same issue as described below by Olivier. I have tried twice and it failed twice at the exact same point (cloning using SSH works correctly). I have raised https://bugs.tizen.org/jira/browse/TINF-513 to track this. Geoffroy On Wed, 2014-03-12 at 10:03 +, VanCutsem, Geoffroy wrote: Hi Rui, On Wed, 2014-03-12 at 09:19 +, Lv, RuiX wrote: Hi Oliver, VanCutsem, all Tizen enthusiasts, Thanks a lot for your active feedback. I’m here sharing some tips and heads-up regarding cloning Tizen source: Regarding SSH configuration file == l When working at home, you don’t need any proxy, so the ssh configuration files for all Linux distribution versions can be unified as follows: Host tizen review.tizen.org Hostname review.tizen.org IdentityFile ~/.ssh/id_rsa User Gerrit_Username Port 29418 l When working in a corporate environment, for example, inside intel, proxy line is must-have, and you need to make a choice based on your Linux distribution versions. For Ubuntu, openSUSE, and CentOS, append “ProxyCommand nc -X5 -x Proxy Address:Port %h %p, whereas for Fedora, append “ProxyCommand nc --proxy-type socks4 --proxy Proxy Address:Port %h %p”. Regarding Cloning through ssh/http == l PRC users may find it tricky to “communicate” with google server when downloading the Repo tool, initializing the repo, and synchronizing Tizen source. Typical confusion is: No error message is displayed when downloading the Repo tool by using curl, but when proceeding to **repo init**, users may find the “hidden” issue come out of nowhere. In this case, keep in mind that this is an “communication” issue between PRC users and google, just clear your head and try running the commands with tsocks, some examples are shown below: $ tsocks curl http://commondatastorage.googleapis.com/git-repo-downloads/repo ~/bin/repo $ tsocks repo init -u ssh://Username@review.tizen.org:29418/scm/manifest -b tizen -m ivi.xml $ tsocks repo init -u https://Username:HTTPS_Password@review.tizen.org/gerrit/p/scm/manifest -b tizen -m ivi.xml l When initializing and cloning through HTTP, users may be blocked by the “server certificate verification” issue, run the following command and try again: $ export GIT_SSL_NO_VERIFY=1 That's exactly the problem I hit when trying to clone via HTTPS this morning... thanks for the note! If you guys have other confusions, please feel free to raise it. I’m considering summarizing these issues and publishing an official tips and heads-up on source.tizen.org. I think it would be very useful to have that documented on the official Tizen wiki. I'd recommend you add such info (esp. related to tsock and GIT_SSL_NO_VERIFY) to the main wiki page, i.e.: https://source.tizen.org/documentation/developer-guide/cloning-tizen-source Your comments are always more than welcome. Thanks Rui From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Olivier Delbeke Sent: Wednesday, March 12, 2014 4:03 PM To: VanCutsem, Geoffroy Cc: ivi@lists.tizen.org Subject: Re: Problem cloning Tizen source Hi Geoffroy, Thank you. I have not personnally but I know others have tried (and I will try this this morning too). The webkit-efl package is particularly large and it looks suspicious that it's stopping at exactly 1GB. Did 'repo sync' successfully clone all the other projects before that one? Yes, I confirm that all (or nearly all : progress was 880/888) other projects were cloned correctly by 'repo sync'. Olivier Inactive hide details for VanCutsem,VanCutsem, Geoffroy ---03/12/2014 08:55:18 AM---VanCutsem, Geoffroy geoffroy.vancut...@intel.com VanCutsem, Geoffroy geoffroy.vancut...@intel.com 03/12/2014 08:55 AM To Olivier Delbeke olivier.delb...@awtce.be cc ivi@lists.tizen.org ivi@lists.tizen.org Subject Re: Problem cloning Tizen source Hi Olivier, On Wed, 2014-03-12 at 08:20 +0100, Olivier Delbeke wrote: Hi Geoffroy, Thanks a lot for your help. I took my PC at home and there, the SSH connection went just fine (same result as you) and I could finalize the cloning. So the port 29418 must be blocked here by our ICT. We do not have a proxy, so it must be some kind of filtering rule. I will ask them to have a second look. Thanks for confirming that. For the HTTPS problem, I think that the root cause is on Tizen's
Re: Can't launch video playback on latest IVI image
It also looks like the VA-API plugins fails to open the i915 driver which is what's providing the decoder (HW)... care to quickly try with 'security=none' (and I shall add in the very same breathe that it wouldn't constitute a workaround if that worked!)... On Tue, 2014-03-11 at 15:47 -0700, Rees, Kevron wrote: Looks like it may be missing a gstreamer plugin (perhaps plugins-bad or plugins-ugly?). can you do a zypper se | grep gst and copy the output here? On Tue, Mar 11, 2014 at 3:22 PM, Tomasz Olszak olszak.tom...@gmail.com wrote: Hi I installed latest (tizen_20140311.6_ivi-mbr-i586-sdb.raw.bz2) image on nexcom device and I am not able to play video with gst-launch-1.0 and playbin see: http://pastebin.com/v1Lc2t2f I remember that it worked a few weeks ago... -- regards, Tomasz Olszak Qt for Tizen | http://qt-project.org/wiki/Tizen ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: RE: Not able to run web app in TIZEN 3.0 emulator.
Could you give us more details on the failure: - Do you see any error message? - What version of the emulator are you using? - What web app are you trying to launch? Thanks, Geoffroy On Mon, 2014-03-10 at 13:43 +0800, karthik karthik wrote: Hi, I tried that but it didn't work. Thanks, Karthik __ From: Li, Hao H hao.h...@intel.com; To: karthikkarthik...@yahoo.in karthikkarthik...@yahoo.in; ivi@lists.tizen.org ivi@lists.tizen.org; Subject: RE: Not able to run web app in TIZEN 3.0 emulator. Sent: Mon, Mar 10, 2014 4:55:45 AM You might need to run wrt-launch –l to get the correct app name that you want to run From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of karthikkarthik...@yahoo.in Sent: Monday, March 10, 2014 12:54 PM To: ivi@lists.tizen.org Subject: Not able to run web app in TIZEN 3.0 emulator. Hi, I had installed Tizen 3.0 ivi. I am trying to run web apps in the emulator. I am launching the app with command WRT-LAUNCHER -S APP-NAME but there is no application been thrown up on the screen. It shows a wayland terminal.. Is this the right way to launch apps or am I missing something. Thanks, Karthik ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: I can not display screen when i use weston
On Fri, 2014-02-28 at 09:41 +, Yang Andy wrote: Hi,Everyone I can not display screen when i use weston. I flashed Tizen IVI 3.0 into VTC 1010 of nexcom. According to 'https://wiki.tizen.org/wiki/IVI/IVI_January_15,_3.0-M2-EOY#Installing_the_ICO_HomeScreen'， i installed ico-uxf-homescreen into Tizen 3.0. but HomeScreen can not be displayed in VGA monitor,it is black. screen. Did you ever get the weston desktop shell window before installing the ICO HomeScreen? It may be worth a quick look in the /etc/xdg/weston/weston.ini file too in case you have modified it to make sure that there is no section that turns the VGA output off or set it to a mode that is incompatible with your monitor settings. Error Information:Feb 28 08:44:06 ivi_box amd[155]: ERR155:ecore_wl ecore_wl.c:163 ecore_wl_init() Could not connect to Wayland display. Can you check the video mode in the bios and change it UEFI if it's set to 'Legacy only'. I've heard this can cause issues (although I'm not sure it has the same symptons as you describe). Cheers, Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: wifi direct. WPS.
There is also a wiki page describing the current state of affair when it comes to WiFi-Direct in Tizen IVI: https://wiki.tizen.org/wiki/IVI/Wi-Fi_Direct Cheers, Geoffroy On Wed, 2014-02-26 at 10:39 +, Clark, Joel wrote: The wifidirect-manager was built for a mobile platform and has not been ported (or replaced) to a working version for IVI. There is ongoing work for WifiDirect for IVI, I've been told various estimates from 2-5 months to complete. Regards Joel -Original Message- From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Jorge A. Ramirez-Ortiz Sent: Tuesday, February 25, 2014 7:36 AM To: ivi@lists.tizen.org Subject: wifi direct. WPS. Hi, We are using https://wiki.tizen.org/wiki/IVI#Tizen_3.x_codebaseas the codebase for a new product on the BayTrail. After correcting some issues with the udev rules, we have a functional wifi interface using the ath9k_htc driver. However WifDirect doesnt seem to be functional - and the wifidirect-manager is not installable either. [root@ivi_box rpms]# zypper search wifi Loading repository data... Reading installed packages... S | Name | Summary | Type --+--+-+ i | capi-network-wifi| Network Wi-Fi library in TIZEN C API| package i | capi-network-wifi-devel | Network Wi-Fi library in Tizen C API (Development) | package i | capi-network-wifi-direct | Network WiFi-Direct library in Tizen CAPI | package i | capi-network-wifi-direct-devel | WiFi-Direct library (Shared Library) (Developement) | package i | libwifi-direct | Wifi Direct Library | package i | libwifi-direct-devel | Wifi Direct Library (Shared Library) (Development) | package | wifi-direct-manager | Wi-Fi Direct manger | package | wifi-direct-plugin-wpasupplicant | Wifi direct plugin for wpa supplicant | package [root@ivi_box rpms]# zypper install wifi-direct-manager Loading repository data... Reading installed packages... Resolving package dependencies... The following NEW package is going to be installed: wifi-direct-manager 1 new package to install. Overall download size: 41.5 KiB. After the operation, additional 161.9 KiB will be used. Continue? [y/n/?] (y): Retrieving package wifi-direct-manager-1.0.0-10.1.i686 (1/1), 41.5 KiB (161.9 KiB unpacked) Retrieving: wifi-direct-manager-1.0.0-10.1.i686.rpm [done] (1/1) Installing: wifi-direct-manager-1.0.0-10.1 ..[error] Installation of wifi-direct-manager-1.0.0-10.1 failed: (with --nodeps --force) Error: Subprocess failed. Error: RPM failed: error: A domain name system hasn't been yet defined by any package. Can't verify if it is allowed error: AC domain setup failed for wifi-direct-manager error: wifi-direct-manager-1.0.0-10.1.i686: install failed [root@ivi_box rpms]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 55 model name : Intel(R) Atom(TM) CPU E3845 @ 1.91GHz stepping: 3 microcode : 0x31e cpu MHz : 581.000 cache size : 1024 KB ... ... Please could you advise on the steps required to enable this functionality on x86 silicon. I believe the current scripts in wifi-direct-manager tend to treat x86 as an EMUL target and not a real one. is it just a matter of recompiling the wifi-direct-manager and the supplicant with the right options? The information on IVI is quite vague and unprecise - and yes, we can get the p2p_ to resolve the PIN synchronization but who takes care of the WPS on IVI? I believe this is the role of the wifidirect-manager? thanks Jorge Jorge ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: RE: tizen ivi resource
On Tue, 2014-02-25 at 10:26 -0800, Hanchett, Paul wrote: I think the problem is that he's using the August release which was still using X, if I recall correctly. The IVI uses Wayland since the 3.0-M1 preview early July (https://wiki.tizen.org/wiki/IVI/IVI_July_2,_3.0-M1) Jin, if you can you should update to a newer IVI image--lots have things have been fixed and more is working than in the Aug release! (Also the help you get from this forum will apply to what you are running. ;-) ) +1 on the recommendation :) Cheers, Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: Tizen device: receiving files
On Wed, 2014-02-26 at 15:09 -0500, Jorge A. Ramirez-Ortiz wrote: We have enabled tethering on our IVI device and would like to transfer files to it from a remote client. Is there any service currently available that we could use to receive those files? an FTP server perhaps? I typically use scp to transfer file to/from my Tizen IVI system. The only thing I'm always careful off too is that I use the 'root' user when doing that and so the very first thing I do after transferring files to Tizen IVI is to make the 'app' user the owner of these. You'll also have to take care of the Smack label if/when you switch a newer version (post 3.0-M2-EOY). You can refer to that wiki page for an example of how to do it (courtesy of Brian!) https://wiki.tizen.org/wiki/IVI/MediaPlayer#Copying_media_to_your_device_.2F_SMACK Cheers, Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Adding native application at framework level
Hi Rao, The short answer is: yes, it's possible and many people already do that today. There is already quite some info on the Tizen IVI wiki (https://wiki.tizen.org/wiki/IVI) but feel free to reach out to this mailing list if you have a more specific question. Thanks, Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of sumanth rao Sent: Thursday, February 20, 2014 7:42 AM To: ivi@lists.tizen.org Subject: Adding native application at framework level Hai all, Is it possible to add native application at framework level Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Getting the log output for WRT plugin
New wiki page for this: https://wiki.tizen.org/wiki/IVI/Enable_Logging Please feel free to review/comment/add/correct/etc... Cheers, Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Ylinen, Mikko Sent: Thursday, February 20, 2014 1:46 PM To: Sun, Xun Cc: ivi@lists.tizen.org Subject: Re: Getting the log output for WRT plugin On Thu, Feb 20, 2014 at 2:41 PM, Sun, Xun xun@intel.commailto:xun@intel.com wrote: This is indeed worth a wiki page. Does this work for the 2.0 codebase? For Tizen IVI 2.0 we only have 'dlog and Android logger' option available. -- Mikko Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
R: [Dev] crosswalk on ivi
Rees, Kevron kevron.m.r...@intel.commailto:kevron.m.r...@intel.com ha scritto: What version of crosswalk works on IVI? I built the latest 4.32.74 from the tizen branch on gerrit. When I run xwalk i get a window with a white screen. If I run xwalk --remote-debugging-port=9222, debugging doesn't work. If I run xwalk www.google.comhttp://www.google.com I don't even get a window. Is this expected? When I last tried (don't remember the version number), I had to include 'http://' to get some content displayed, i.e xwalk http://www.google.com Geoffroy -Kevron ___ Dev mailing list d...@lists.tizen.orgmailto:d...@lists.tizen.org https://lists.tizen.org/listinfo/dev Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: Best hardware platform for TIZEN IVI
On Thu, 2014-02-06 at 10:17 +0100, Mariem Mhiri wrote: Hello, I am new at TIZEN IVI and I am wondering which will be the best hardware platform to use with TIZEN IVI for automotive use. I'd recommend you take a look here: - Tizen IVI HW platforms: https://wiki.tizen.org/wiki/IVI/IVI_Platforms - Tizen IVI wiki: https://wiki.tizen.org/wiki/IVI Cheers, Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: Configure Wayland Desktop
On Thu, 2014-02-06 at 08:38 -0800, McGee, Art wrote: I know about the wayland.ini file but have been unable to set the screen rotation. I have recently installed the January 15th release of the ivi on an NDIS166. I have fixed it like the Sept release but it doesn't seem to work. Has something changed in the January Release that makes setting the rotation of the wayland screen different in this release? I have just verified that I can change the screen rotation on my VTC7120 (so not the NDiS 166) by 90 degree by editing the /etc/xdg/weston/weston.ini file. Can you tell us more about the exact changes you have tried on your NDiS 166 that did not work? Thanks, Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: Frequency of build breaks ?
On Tue, 2014-01-28 at 20:22 -0800, Hanchett, Paul wrote: There may be some semantics at play here, too. As I understand it, the releases that Tracy mentions are built from binaries produced by the OBS build system, and almost certainly won't be in sync with the repositories you'll get by doing a repo sync--OBS builds from gerrit-curated sources, not the development tip of the repositories (which is what you typically get with a sync...) Since GBS builds from the local repositories on your machine, the results of a GBS build won't necessarily line up with those from OBS. This is correct if you use the following procedure: - $repo init -u review.tizen.org:/scm/manifest -b tizen -m ivi.xml - $repo sync In this case, the difference will be that some git repositories may/will be ahead of what is in OBS (i.e. this will be the case if new code has been merged following a review but not yet pushed to OBS by the maintainer using 'gbs submit'). If you wish to clone the *exact* source code for a daily (or any other) image, you could use the manifest file that is published alongside such image, e.g.: -For all packages available in the repo: http://download.tizen.org/releases/daily/tizen/ivi/ivi/latest/builddata/manifest/tizen_20140128.20_ia32.xml - For all packages that are pre-installed in the image (subset of above): http://download.tizen.org/releases/daily/tizen/ivi/ivi/latest/images/ivi-mbr-i586/tizen_20140128.20-ivi-mbr-i586.manifest.xml (At least, I *think* it's true that syncing repositories gets the latest that's been checked in, not the latest approved in gerrit...) That's correct as per my understanding. This is definitely an oversimplification, but I think it's true as far as it goes. I'm sure others will point out any inaccuracies! ;-) Paul Paul Hanchett --- Infotainment Engineer MSX on behalf of Jaguar Land Rover One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, Oregon, 97204 Email: phanc...@jaguarlandrover.com --- Business Details: Jaguar Land Rover Limited Registered Office: Abbey Road, Whitley, Coventry CV3 4LF Registered in England No: 1672070 On Tue, Jan 28, 2014 at 2:16 PM, Graydon, Tracy tracy.gray...@intel.com wrote: Hi Mark, Well, much depends on how you define “build breaks.” If we are talking about the relative stability of images, which is what I think you are saying, then yes, it definitely goes up and down depending on what we are trying to accomplish at a given point in the development cycle. You don’t mention which “latest” versions you are using, so I will outline the various sources for images with their relative stability/quality levels: Snapshots: http://download.tizen.org/snapshots/tizen/ivi/ivi/ These are “intermediate” builds that result from accepting new changes into Tizen:IVI over the course of the day. These are images that we DO NOT recommend you use. When developers submit changes, they may check these images and the build logs to sanity check their changes. However, there is absolutely no guarantee that these images will boot, muchless perform as expected. They are strictly “use at your own risk.” Daily Releases: http://download.tizen.org/releases/daily/tizen/ivi/ivi/ These are the culmination of the days’ changes. Release Engineering “smoke tests” these to ensure that they meet some basic requirements before publishing. i.e. The daily should boot, come up to the expected UI or console, depending on the image requirements, be able to run webapps, and not do anything too weird that isn’t already a known issue. We consider these images to be worthy of a full QA testing run. While these images are considered to be more stable than snapshots at at least the level of having passed our smoke testing. That does not mean that there are not regressions or new bugs lurking there. QA does their testing and opens bugs accordingly against anything they find. Additionally, overall stability and usability may be affected by integration of new components, features, or major changes to things like security, smack, rpm, webkit, weston, wayland, etc. We expect the initial integration of these things to be a little bumpy as we get things working. So you will definitely see flux in quality and stability here, especially early on in the development cycle. Typically this irons out to some degree as we get closer to a major release and we go more into bug-fix mode and do less integration work. These images are great for looking at new features
Running Tizen IVI-3.0-M2-EOY in VMware
Hi folks, As many of you know, it hasn't been possible for a while to run Web applications with Tizen IVI running in VMware, this was tracked here: TIVI-1859https://bugs.tizen.org/jira/browse/TIVI-1859. I'm actually delighted to report that we now have a solution to that problem and I have updated the wiki page with information on how you can modify the latest Tizen IVI 3.0-M2-EOYhttps://wiki.tizen.org/wiki/IVI/IVI_January_15,_3.0-M2-EOY preview to enable just that. Please refer to the Tizen IVI 3.x in VMwarehttps://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware wiki page and the Tizen IVI 3.0-M2-EOYhttps://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware#Tizen_IVI_3.0-M2-EOY section in particular. Please let me know if you have any questions on that. Cheers, Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Tizen IVI 3.0-M2-EOY preview has been released
The Tizen IVI team has released Tizen 3.0-M2-EOY for In-Vehicle Infotainment (IVI) on January the 15th. This preview release builds upon the Tizen 3.0 codebase and is our next step towards the final 3.0 Tizen IVI releases (H2 2014). We are also very excited to have our first (alpha) release of the Tizen SDK for In-Vehicle Infotainmenthttps://wiki.tizen.org/wiki/Tizen_IVI_SDK! There are many core components that have been upgraded and enhanced, adding more features to the stack and paving the way for future features such as a fully-enabled Three-Domains Smack securityhttps://wiki.tizen.org/wiki/Security:SmackThreeDomainModel model. A lot of enabling has been done throughout the stack for this but it's not yet completely ready (hence we boot with 'security=none'). On the various subsystems, the communication subsystem has been upgraded to bring BT HFP 1.6 and AVRCP 1.4+ (oFono 1.13 and BlueZ 5.12), so has the entire graphics subsystem (Mesa 9.2.1, Wayland/Weston 1.3.1, EFL 1.7.8). The kernel itself has been upgraded to 3.12.4 (that includes support for Intel(r) Atom(tm) E38xx processors formerly known as 'Bay Trail'http://ark.intel.com/products/codename/55844/Bay-Trail?q=Bay%20Trail#tabs-Embedded), the Automotive Web API has been enhanced (AMB 0.10) and we have also had our fair share of performance improvement (e.g. CSS HW acceleration). A series of GENIVI components have been added such as Diagnostic, Log and Tracehttp://projects.genivi.org/diagnostic-log-trace, Node Startup Controllerhttp://projects.genivi.org/node-startup-controller, Audio Managerhttp://projects.genivi.org/audio-manager, a Wayland shell that implements the GENIVI Layer Manager APIhttp://git.projects.genivi.org/?p=wayland-ivi-extension.git;a=summary (genivi-shell). The Tizen IVI team has filed an application to be a certified GENIVI 4.0-compliant stack (pending approval). An improved sample HomeScreen (ICO) is available although it is not installed by default. The complete release notes are available here: https://wiki.tizen.org/wiki/IVI/IVI_January_15,_3.0-M2-EOY For more information about Tizen for In-Vehicle Infotainment (IVI), please go and visit our wiki at: https://wiki.tizen.org/wiki/IVI If you are new to Tizen IVI Project and are looking for ways to start contributing, please refer to our How to Contribute wiki page at https://wiki.tizen.org/wiki/How_to_contribute_to_Tizen_IVI Best regards, Geoffroy (on behalf of the Tizen IVI team) Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
Re: How to configure default gateway?
I'd recommend to use ConnMan directly for this instead of modifying/creating config files (I'm just not sure if/when they get in conflict with ConnMan). In general, I'd expect the gateway info to be provided by your DHCP server, is that not the case? If you'd like to set-up a static IP address, please take a look here: https://wiki.tizen.org/wiki/IVI/ConnMan_Tips_%26_Tricks HTH, Geoffroy On Fri, 2014-01-17 at 07:53 +, Michael Johnson wrote: You would need create an interface file in /etc/sysconfig/network-scripts and add the default gateway in there: i.e. GATEWAY=aaa.aaa.aaa.aaa Have a look at this link on how to set it up, although it doesn't mention adding the gateway, it is a typical example of a configuration file for some of the linux OSes I've used: http://docs.oracle.com/cd/E37670_01/E41138/html/ol_about_netconf.html Hope that helps Mike MICHAEL JOHNSON Test Engineer Symphony Teleca Sunley House, 46 Jewry Street, Winchester, Hampshire, SO23 8RY Phone: +441962868866, Fax: +441962868867 michael.john...@symphonyteleca.com www.symphonyteleca.com Teleca Limited, a company registered in England Wales, registration number 2773878, registered office at Sunley House, 46 Jewry Street, Winchester, Hampshire SO23 8RY. VAT registration number GB 674 6583 90 Follow what's going on at Symphony Teleca's blog on www.symphonyteleca.com/blog. Please consider the environment before you print. Notice to recipient: This e-mail (including any attachments) is meant for the intended recipient only, may contain confidential and proprietary information, and is protected by law. If you received this e-mail in error, please immediately notify the sender of the error by return e-mail, delete this communication and any attachments, and shred any printouts. Unauthorized review, use, dissemination, distribution, copying or taking of any action based on this communication is strictly prohibited. __ From: ivi-boun...@lists.tizen.org [ivi-boun...@lists.tizen.org] on behalf of Yu, Max A [max.a...@intel.com] Sent: Friday, January 17, 2014 7:30 AM To: ivi@lists.tizen.org Subject: How to configure default gateway? I can set default gateway by following command in Tizen IVI: # route add default gw 10.0.2.2. eth0 Can I do the same thing by editing some config files? Thanks, Max ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: setup of TCP/IP network configuration
Hi Gorka, In case using a static IP on the Ethernet network (as suggested below by Mikko) does not work. Here are a couple of options to try connect to a WiFi network: 1. Following Joel's recommendation: download the 'connman-test' package on another machine and transfer it manually (e.g. USB stick) to your VTC7120. Note that you you'll also need to download one additional dependency called 'pygobject'. Make sure you use the repo that matches your Tizen IVI version (e.g. for the Tizen IVI 3.0-M2-Sep preview: http://download.tizen.org/releases/milestone/tizen/ivi/tizen_20131011.2/repos/ivi/ia32/packages/i686/). There is a number of Python scripts put in /usr/lib/connman/test that you can use (look at the 'simple-agent' and 'test-connman' scripts). 2. I have tried in the past to use 'connmanctl' to connect to a secure WiFi network, following these steps: Connecting to a protected access point To connect to a protected access point connmanctl needs to be run in interactive mode. For protected access points you will need to provide some information to the connman daemon, at the very least a password or a passphrase. In interactive mode we can register an agent to handle these user requests. To start simply type: $ connmanctl The prompt will change to connmanctl to indicate you are now in interactive mode. You then proceed almost as above, first scan for any wifi technologies: connmanctl scan wifi To list services: connmanctl services Now you need to register the agent. The command is: connmanctl agent on You now need to connect to one of the protected services. To do this it is very handy to have a terminal that allows cut and paste. If you were connecting to OtherNET in the example above you would type: connmanctl connect wifi_dc85de828967_38303944616e69656c73_managed_psk The agent will then ask you to provide any information the daemon needs to complete the connection. The information requested will vary depending on the type of network you are connecting to. The agent will also print additional data about the information it needs as shown in the example below. Agent RequestInput wifi_dc85de828967_38303944616e69656c73_managed_psk Passphrase = [ Type=psk, Requirement=mandatory ] Passphrase? Provide the information requested, in this example the passphrase, and then type: connmanctl quit If the information you provided is correct you should now be connected to the protected access point. BUT, I was always getting a segfault. I thought I had filed a bug for this but I can't find it anymore (so I probably forgot to do it... :(). This is something I should re-test in the latest image and file a bug accordingly and also add this to the ConnMan Tips Trickshttps://wiki.tizen.org/wiki/IVI/ConnMan_Tips_%26_Tricks wiki page. Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Ylinen, Mikko Sent: Friday, January 17, 2014 1:23 PM To: Gorka Vélez Cc: ivi@lists.tizen.org Subject: Re: setup of TCP/IP network configuration Hi, On Thu, Jan 16, 2014 at 4:26 PM, Gorka Vélez gve...@vicomtech.orgmailto:gve...@vicomtech.org wrote: Hello all, I have installed Tizen IVI on a VTC 7120-BK computer, and I don't know how to setup TCP/IP network configuration via Ethernet. Can anyone help me telling me which are the required steps? My aim is to use WiFi, but as I have read, I need an internet connection to install some packages. So I guess that first I have to setup ethernet network. Would this HOWTO help? https://wiki.tizen.org/wiki/IVI/ConnMan_Tips_%26_Tricks#Setting_up_a_static_IP_address -- Mikko Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: application installation o tizen ivi
Hi Anurag, From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Anurag K Bharati Sent: Tuesday, January 07, 2014 11:24 AM To: ivi@lists.tizen.org Subject: application installation o tizen ivi Hello, I'm running tizen ivi in vmware and trying to install tpk/wgt apps but getting error. These apps are working well in emulator. How should I install them in ivi? Using tizen_20130829.9_ivi-release-mbr-i586 and vmware player 6.0.1. 1) bash-4.2# wrt-installer -i ActiveAppList.wgt wrt-installer : Kxre7GuDDv.ActiveAppList installation has failed - fatal error [Geoffroy] Make sure you use the 2.1 version of the Tizen SDK or at least set the version via the config.xml file. E.g.: tizen:application id=Kxre7GuDDv.ActiveAppList package= Kxre7GuDDv required_version=2.1/ HTH, Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Problem booting image in VMPlayer
I couldn’t spot anything unusual in your log files. It looks to me like everything is started correctly in your guest environment. Can you confirm which Intel graphics card you have (and which driver version is loaded) on your host? Thanks, Geoffroy From: Sathish Kumar Balasubramaniam -ERS, HCL Tech [mailto:b-sathishku...@hcl.com] Sent: Friday, January 03, 2014 12:40 PM To: Mark De Roussier; VanCutsem, Geoffroy; ivi@lists.tizen.org Subject: RE: Problem booting image in VMPlayer Hi Mark, Ctrl+Alt+F1 doesn’t give any prompt. I got the prompt by pressing Ctrl+Alt+F3 For copying the output of “journalctl –a”, you can connect using PuTTY using the IP displayed by command ifconfig (Login user – root, pass – tizen) Regards, B.Sathish Kumar From: Mark De Roussier [mailto:mark.derouss...@symphonyteleca.com] Sent: Friday, January 03, 2014 4:18 PM To: VanCutsem, Geoffroy; Sathish Kumar Balasubramaniam -ERS, HCL Tech; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: Problem booting image in VMPlayer Hi Geoffroy, Ctrl-Alt-F1 returns me to a display of the latest console output, but does not actually give me a console if you see what I mean – I cannot enter commands. I suppose that theoretically using qemu I might be able to mount the vmdk disk and poke around there. Not sure what I’d be looking for. Attached are the vmx, the log ( zipped ), and a png of the last console output ( I can’t capture it any other way from the host side I think ). I think the avsystem issue shown in the console output is a known M2 problem (https://bugs.tizen.org/jira/browse/TIVI-1474 ). I think the last log entry before I shutdown the VM is line 1728. Cheers, Mark de Roussier From: VanCutsem, Geoffroy [mailto:geoffroy.vancut...@intel.com] Sent: 03 January 2014 09:38 To: Sathish Kumar Balasubramaniam -ERS, HCL Tech; Mark De Roussier; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: Problem booting image in VMPlayer I would suggest the following: - Let’s stick to the 3.0-M2-Aug preview for now - Keep the “Accelerate 3D graphics” option enabled If all you get is a black screen, try ‘Ctrl-Alt-F1’ (or other Fx) to see if you have a console available - Can you both check (and maybe send us): - virtual-machine-name.vmx (on your host, directly in your folder where the VM disks/config files are located) - ‘vmware.log’ (same folder as above) - ‘journalctl –a’ output (in your guest VM) Thanks, Geoffroy From: Sathish Kumar Balasubramaniam -ERS, HCL Tech [mailto:b-sathishku...@hcl.com] Sent: Friday, January 03, 2014 8:23 AM To: VanCutsem, Geoffroy; Mark De Roussier; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: Problem booting image in VMPlayer I too have the same issue. The only difference I can see is I am trying in 32-bit whereas in the website it’s given as 64-bit. Regards, B.Sathish Kumar From: ivi-boun...@lists.tizen.orgmailto:ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of VanCutsem, Geoffroy Sent: Thursday, January 02, 2014 10:38 PM To: Mark De Roussier; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: Problem booting image in VMPlayer Hi Mark, Happy New Year to you too and to the rest of the Tizen IVI community out there! ☺ It sounds indeed like there is some sort of deficiency on your host machine… not sure what. I’m using a Lenovo X220 (Core i5 with Intel HD Graphics 3000) and that works fine. The other thing you could check is wether VT (virtualisation) is turned on on your machine (in the Bios). I don’t know if that could make a difference but something to double-check. Cheers, Geoffroy From: Mark De Roussier [mailto:mark.derouss...@symphonyteleca.com] Sent: Thursday, January 02, 2014 4:31 PM To: VanCutsem, Geoffroy; ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: RE: Problem booting image in VMPlayer Hi Geoffroy, Thanks for the quick reply ! Happy new year ☺. So, I have had many problems getting a 3.0 image going in a VM, and have tried many combinations of player version, host platform, and image. All of my attempts to use VMWare Player 6 ( on Windows and Linux ( Kubuntu 12.04 ), using M2 and a later daily build from December ) have failed early in kernel initialization with a complaint about being unable to read the RTC. You are correct about the lack of 3D acceleration, it’s good to confirm that this is related. I deselected this option, because with it selected I would end up with just a black screen displayed just after the ‘Reached target Graphical Interface’ message – no splash, no prompt, no logs, nothing. This wasn’t very useful, so I deselected it just to be able to read the console output ☺. So I am still thinking that my host platform is deficient in some sense. Perhaps VMPlayer just does not play nice with these HD Graphics drivers, or something like that. I’ll see if there are some newer graphics drivers available. In the slightly longer term I
RE: Problem booting image in VMPlayer
Hi Mark, This is typically what happens when there is no 3D acceleration available. Can you make sure that the “Accelerate 3D graphics” option is checked (in the virtual machine settings under “Display”)? FYI, I have just tested that particular Tizen IVI image on both my systems and it works fine for me too. I shall also note that I have since then upgraded my VMware Player to version 6.0.0 build-1295980 (on Windows 7 Pro SP1, 64b) so feel free to give that version a try too. Thanks, Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Mark De Roussier Sent: Thursday, January 02, 2014 3:11 PM To: ivi@lists.tizen.org Subject: Problem booting image in VMPlayer Hi everyone, I’m attempting to get a Tizen 3.0 IVI image booting in VMPlayer. I’m using : VMPlayer 5.02 ( as per the VM instructions here https://wiki.tizen.org/wiki/IVI/IVI_3.0_VMware ) : http://download.tizen.org/releases/milestone/tizen/ivi/tizen_20130829.9/images/ivi-release-mbr-i586/ Windows 7 Pro SP1 64bit My boot sequence gets to [ OK ] Reached target Graphical Interface [ timestamp value ] pcnet32 :2.01.0 ens33: link up and then just appears to halt – no login prompt, etc. A colleague is able to get this combination booting, but I am not, which possibly suggests a host hardware related issue. The relevant machine is a Dell Latitude 6410 laptop ( Intel HD Graphics ). Has anyone encountered a problem like this, or have any suggestions for further investigation ? Thanks, Mark de Roussier MARK DE ROUSSIER Team Lead Symphony Teleca Sunley House, 46 Jewry Street, Winchester, Hampshire, SO23 8RY Phone: +441962891219, Fax: +441962868867 mark.derouss...@symphonyteleca.commailto:mark.derouss...@symphonyteleca.com www.symphonyteleca.comhttp://www.symphonyteleca.com Teleca Limited, a company registered in England Wales, registration number 2773878, registered office at Sunley House, 46 Jewry Street, Winchester, Hampshire SO23 8RY. VAT registration number GB 674 6583 90 Follow what's going on at Symphony Teleca's blog on www.symphonyteleca.com/bloghttp://www.symphonyteleca.com/blog. Please consider the environment before you print. Notice to recipient: This e-mail (including any attachments) is meant for the intended recipient only, may contain confidential and proprietary information, and is protected by law. If you received this e-mail in error, please immediately notify the sender of the error by return e-mail, delete this communication and any attachments, and shred any printouts. Unauthorized review, use, dissemination, distribution, copying or taking of any action based on this communication is strictly prohibited. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: qt.yaml and rpm pattern
From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Tomasz Olszak Sent: Thursday, December 19, 2013 9:55 PM To: ivi@lists.tizen.org; Ylinen, Mikko Subject: qt.yaml and rpm pattern Hi, I've create and installed met-common with qt.yaml (attached). After installation I see /usr/share/package-groups/common/qt.yaml however zypper pt output is following: | applications | | tizen-ivi | i | base | | tizen-ivi | | base-desktop | | tizen-ivi | | benchmarks | | tizen-ivi | i | console-tools| | tizen-ivi | | development | | tizen-ivi | | enlightenment| | tizen-ivi | i | ivi-adaptation | | tizen-ivi | | ivi-applications | | tizen-ivi | i | ivi-middleware | | tizen-ivi | i | ivi-packaging| | tizen-ivi | | ivi-qa | | tizen-ivi | | mfld-adaptation | | tizen-ivi | | pc-adaptation| | tizen-ivi | i | wayland | | tizen-ivi | i | web-framework| | tizen-ivi | so zypper in -t pattern qt doesn't work. [2] is the zypper.log from zypper in meta-common Any hints? [Geoffroy] As far as I understand it, zypper will gather the list of existing patterns from the repositories (e.g. http://download.tizen.org/releases/daily/tizen/ivi/ivi/latest/repos/ivi/ia32/packages/repodata/patterns.xml), not from a file stored locally. I'll let the backend service folks correct me if I'm wrong but I believe meta-common is somewhere used to generate the patterns.xml file that is published in the Tizen IVI repos. I don't know how you can test your change locally before submitting a Gerrit review. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: qt.yaml and rpm pattern
From: Tomasz Olszak [mailto:olszak.tom...@gmail.com] Sent: Friday, December 20, 2013 12:02 PM To: VanCutsem, Geoffroy Cc: ivi@lists.tizen.org; Ylinen, Mikko Subject: Re: qt.yaml and rpm pattern [Geoffroy] As far as I understand it, zypper will gather the list of existing patterns from the repositories (e.g. http://download.tizen.org/releases/daily/tizen/ivi/ivi/latest/repos/ivi/ia32/packages/repodata/patterns.xml), not from a file stored locally. I'll let the backend service folks correct me if I'm wrong but I believe meta-common is somewhere used to generate the patterns.xml file that is published in the Tizen IVI repos. I don't know how you can test your change locally before submitting a Gerrit review. I see, so it looks like I can test it by creating local repo with Qt packages and the patterns.xml file based on https://download.tizen.org/releases/milestone/tizen/ivi/latest/repos/ivi/ia32/packages/repodata/patterns.xml . Thanks for the hint. That's the idea. A more complete test would also involve using the magic tool/script used to convert the yaml file from meta-common into the new patterns.xml file... but I don't know which package this tool is from. Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Enabling offscreen buffer in VMWare
Hi Kien, I'm not an expert in this area but I guess you are talking about the OSMesa library/API? If so, I've quickly checked and although we try to enable this (by passing '--enable-osmesa' to the mesa configure script), it does not get compiled... check out the build log for more details (search of 'osmesa'): http://download.tizen.org/releases/daily/tizen/ivi/ivi/latest/builddata/buildlogs/ia32/succeeded/mesa.buildlog.txt I don't know why it does not get compiled, maybe we're missing a dependency somewhere. Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Dinh, Kien T Sent: Thursday, December 19, 2013 3:47 AM To: ivi@lists.tizen.org Cc: Odagiri, Koshi; Tanaka, Hiroshi; Taguchi, Jiro Subject: Enabling offscreen buffer in VMWare Hi, I would like to ask if there is a way to enable offscreen buffer for Tizen IVI on VMWare. Our customers have been developing with Tizen IVI 3.0 Sep release on VMware. It seems that Ubuntu could support offscreen buffer on virtualization but in Tizen IVI on VMWare it's turned off by default. Thanks, Kien - kien.t.d...@intel.commailto:kien.t.d...@intel.com DINH, Kien TEL: +81-3-6268-4575 SSG-DRD, IJKK, Intel Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Installing wgt app on Tizen IVI arm 2.0 platform
Hi Prasanna, I've never tried myself but here are a couple of things I'd try if I were you: - Try to install the same widget on Tizen IVI (on x86) - Check the SDK version that was used to build that widget, installing a widget built by the SDK 2.2 on a WRT 2.1 will fail for example and the error message you're getting may very well be indicating that this is the problem you're facing here. Thanks, Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of prasanna karthik Sent: Tuesday, December 17, 2013 9:34 AM To: ivi@lists.tizen.org Subject: Installing wgt app on Tizen IVI arm 2.0 platform Is it possible to install wgt application on Tizen IVI 2.0 nov 2013 arm release ? wrt-installer on 2.0 platform fails to install the package with Invalid widget package Is it because of the web run time mismatch or other reasons on platform? Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Tizen with Qt
I may have missed it but what component/package should we use in JIRA to file issues against Qt in Tizen? Thanks, Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Kishore Divvela -ERS, HCL Tech Sent: Thursday, December 12, 2013 4:46 AM To: Ylinen, Mikko; Macieira, Thiago Cc: ivi@lists.tizen.org Subject: RE: Tizen with Qt Thanks for info Mikko From: Ylinen, Mikko [mailto:mikko.yli...@intel.com] Sent: 12 ಡಿಸೆಂಬರ್ 2013 01:32 To: Thiago Macieira Cc: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org; Kishore Divvela -ERS, HCL Tech Subject: Re: Tizen with Qt On Wed, Dec 11, 2013 at 6:21 PM, Thiago Macieira thiago.macie...@intel.commailto:thiago.macie...@intel.com wrote: If you have questions, Tomasz might be able to help you. From what I understand, the Alpha 5 should have created .rpm paclages for Tizen, so it should be now easier to install. Yup, qt5* RPMs can be found from the latest Tizen IVI daily release repo at least. -- Mikko ::DISCLAIMER:: The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Setting up NDIS 166 platform with latest IVI image
-Original Message- From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Wang, Ning W Sent: Tuesday, November 19, 2013 2:34 AM To: ASOKAN.G Cc: ivi@lists.tizen.org Subject: RE: Setting up NDIS 166 platform with latest IVI image Hi Asokan.G, Here I drafted a wiki https://wiki.tizen.org/wiki/How_to_use_SDK_to_create_web_app_for_Tize n_IVI to share my learning on how to create web app by SDK for IVI. FYI. It's verified with SDK 2.2 and IVI 3.0 M2 Aug/Sep release. Thank you for putting this wiki page together! Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: VR plugin API definition
Hi Tom,
Is this what you're looking for?
(from
https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen)
/*
51https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l51
* API to a speech recognition backend.
52https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l52
*/
53https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l53
typedef struct {
54https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l54
/** Activate speech recognition. */
55https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l55
int (*activate)(void *user_data);
56https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l56
/** Deactivate speech recognition. */
57https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l57
void (*deactivate)(void *user_data);
58https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l58
/** Flush part or whole of the audio buffer. */
59https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l59
int (*flush)(uint32_t start, uint32_t end, void *user_data);
60https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l60
/** Schedule a rescan of the given portion of the audio buffer. */
61https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l61
int (*rescan)(uint32_t start, uint32_t end, void *user_data);
62https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l62
/** Get a copy of the audio samples in the buffer. */
63https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l63
srs_audiobuf_t *(*sampledup)(uint32_t start, uint32_t end, void
*user_data);
64https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l64
/** Check if the given language model exists/is usable. */
65https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l65
int (*check_decoder)(const char *decoder, void *user_data);
66https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l66
/** Set language model to be used. */
67https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l67
int (*select_decoder)(const char *decoder, void *user_data);
68https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l68
/** Get the used language model. */
69https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l69
const char *(*active_decoder)(void *user_data);
70https://review.tizen.org/git/?p=profile/ivi/speech-recognition.git;a=blob;f=src/daemon/recognizer.h;h=fbd94ba9069237bcc2b595edf2c03042990e5e75;hb=refs/heads/tizen#l70
} srs_srec_api_t;
Thanks,
Geoffroy
From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On
Behalf Of Counihan, Tom
Sent: Thursday, November 07, 2013 12:32 PM
To: ivi@lists.tizen.org
Subject: VR plugin API definition
Hi Folks,
Could someone be so kind as to direct me to the API definition for voice
recognition plugin infrastructure?
Warm Regards
Tom
RE: image can not booted from usb stick?
It looks like it's an issue with the Thinkpad T420 bios/firmware. Most of the posts that I could find on the topic involved manually tweaking the partitioning of your disk to make it work. Here is an example of such post/wiki: http://www.thinkwiki.org/wiki/Installing_Gentoo_on_a_ThinkPad_X220#Installing_Gentoo_on_a_Lenovo_X220_with_UEFI_and_GPT Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Baodong Chen Sent: Thursday, November 07, 2013 2:18 PM To: artem.bityuts...@linux.intel.com Cc: ivi@lists.tizen.org Subject: Re: image can not booted from usb stick? Already tried set the 'boot flag, as my previous post, but the parted tool i used do not showlegacy_boot flag. and still not work even 'boot' flag set on my pc! == sudo parted /dev/sdb GNU Parted 2.3 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: TOSHIBA TransMemory (scsi) Disk /dev/sdb: 7803MB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End SizeFile system Name Flags 1 1049kB 68.1MB 67.1MB ext4 primary boot 2 68.2MB 3998MB 3930MB ext4 primary On Thu, Nov 7, 2013 at 12:26 PM, Artem Bityutskiy artem.bityuts...@linux.intel.commailto:artem.bityuts...@linux.intel.com wrote: On Wed, 2013-11-06 at 22:16 +0800, Baodong Chen wrote: I just tried the usb stick on another pc(lenovo E430), This time it DID boot So the image is good. it's my pc's problem!!! does anyone know how to fix this, can update bios firmware fix this ? Could you please still try was suggested here. Set the 'boot' flag, in addition to 'legacy_boot', and check if it helps. -- Best Regards, Artem Bityutskiy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Creating a .tpk package for IVI
Hi Mark, The Core OS components are packaged up as RPMs while .tpk and .wgt are applications that will be typically be made available via an AppStore. I don’t know which category you app falls into but you may want to consider packaging it up as an RPM if appropriate. I shall note too that we do not support the Native API (aka OSP) in IVI so you should really be using only Core APIs for your native applications. Cheers, Geoffroy From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Clark, Joel Sent: Thursday, October 31, 2013 11:16 AM To: Mark Callow; Tomasz Olszak Cc: ivi@lists.tizen.org Subject: RE: Creating a .tpk package for IVI I don’t know why bugs.tizen.org needs folks to login to read it. In the past this did not seem to be required. But it is quick and easy to register https://www.tizen.org/user/register regards joel From: ivi-boun...@lists.tizen.orgmailto:ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Mark Callow Sent: Thursday, October 31, 2013 3:08 AM To: Tomasz Olszak Cc: ivi@lists.tizen.orgmailto:ivi@lists.tizen.org Subject: Re: Creating a .tpk package for IVI On 2013/10/31 17:44, Tomasz Olszak wrote: Hi, Currently IVI 3.0 doesn't support tpk format. See https://bugs.tizen.org/jira/browse/TIVI-1944 for details. Ahh! So how can we package our native application? I need to sign up to read that bug. Apologies if it is covered there. Regards -Mark -- 注意：この電子メールには、株式会社エイチアイの機密情報が含まれている場合が有ります。正式なメール受信者では無い場合はメール複製、 再配信または情報の使用を固く禁じております。エラー、手違いでこのメールを受け取られましたら削除を行い配信者にご連絡をお願いいたし ます. NOTE: This electronic mail message may contain confidential and privileged information from HI Corporation. If you are not the intended recipient, any disclosure, photocopying, distribution or use of the contents of the received information is prohibited. If you have received this e-mail in error, please notify the sender immediately and permanently delete this message and all related copies. Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
RE: Image Status : ail_initdb is not in the image
-Original Message- From: ivi-boun...@lists.tizen.org [mailto:ivi-boun...@lists.tizen.org] On Behalf Of Baptiste DURAND Sent: Wednesday, October 23, 2013 4:34 PM To: ivi@lists.tizen.org Cc: DESNEUX Stéphane; Le Foll, Dominique Subject: Image Status : ail_initdb is not in the image Hello all, I started to investigate the several issues related to wrt packages. I saw that in the log of generated images http://download.tizen.org/snapshots/tizen/ivi/ivi/tizen_20131022.2/images/ ivi-mbr-i586/ /var/tmp/rpm-tmp.RS3zX3: line 5: /usr/bin/ail_initdb: No such file or directory ail package is partially installed This is a side effect of commit 86efd85c5f42352e2717728ae4d12d46899f4933 in ail component. This commit split ail package in two different packages : libail ail. ail_initdb is in ail package so it is not installed. ail_initdb call is needed to prepare db app_info.db. app_info.db is needed to make pkg_initdb up running correctly. Rusty, I thinks it is necessary to add it in the image. Could you add ail package in ks file, please? Thanks for your analysis Baptiste! Shouldn't ail (and libail) be pulled in via a dependency instead? Thanks, Geoffroy Intel Corporation NV/SA Kings Square, Veldkant 31 2550 Kontich RPM (Bruxelles) 0415.497.718. Citibank, Brussels, account 570/1031255/09 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ___ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
