Re: [wsjt-devel] Any way to get dupe checking in contest mode?

[Keith Maton via wsjt-devel]

Perfect answer, thanks Bill.

73 Keith G6NHU

> On 2 Dec 2018, at 00:42, Bill Somerville  wrote:
> 
> 
> currently WSJT-X can only help you with detecting dupes when they call CQ . 
> To get this working you must move aside your wsjtx_log.adi file (you will 
> want to put it back after the contest). Then in "Settings->Colors->Decode 
> Highlighting" enable just the "New call on band", "My Call in message", "New 
> DXCC on band", "CQ in message", and "Transmitted message" colours. "LotW 
> User" is optional. Check the "Settings->General->Show DXCC, grid, and 
> worked-before status" option.
> 
> Then work anyone who decodes with a colour highlight other than the green CQ 
> colour.
> 
> 73
> Bill
> G4WJS.
> 
> 
> 
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Edfel Rivera]

Hi Again:

Thinking again about this thing, best explanation ContestLog file got
corrupted probably at entry 26 and that affected no more QSO were being
logged.  Yes, there was something I remember happening with the popup QSO
window where garbage from PPT was received at one of the fields.  Have
commented about that in other post but have not verified and done the test
suggested (my bad).  Corruption was probably fixed when I edited the Recvd
column.  Well, QSO are being logged since I did that.

73'

Edfel
KP4AJ

On Sat, Dec 1, 2018 at 10:19 PM Jim Shorney  wrote:

>
> Yes, I am (attached). Not a biggie, I deleted and recreated that log entry
> again with the correct band. I suspect it got confused because I had 40M
> selected in the main program, even thouth I entered 20m in the log pop-up.
> It came out correct after put WSJT-X back on 20. Except for the time, that
> is.
>
> 73
>
> -Jim
> NU0C
>
>
>
> On Sun, 2 Dec 2018 03:04:00 +
> Bill Somerville  wrote:
>
> > On 02/12/2018 02:52, Jim Shorney wrote:
> > > I manually created a log entry and it accepted it this time. Now,
> however, I am trying to correct the hand in the log to 20m, but 20m does
> not show up on the selection list when on that line. In fact, it only seems
> to show up on the list for entries that are already listed as 20m.
> Likewise, 40m shows up on the selection only for entries already in the log
> as 40m. Th bands that do show on the list are band that have no logged
> entries. Does this make sense, or am I explaining it badly?
> >
> > Hi Jim,
> >
> > I cannot reproduce your issue with editing the band in the Contest Log.
> > When I try here I get a drop down selection with all bands available on
> > it, like this:
> >
> > are you seeing something different from that?
> >
> > 73
> > Bill
> > G4WJS.
> >
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Very few decodes with RC5

[Bill Pence]

KI4US. I saw getting decoded and spotted several times.  I guess
propagation was not helping to the folks I was trying to work?



On Sun, Dec 2, 2018 at 12:19 AM Paul Kube  wrote:

> Or, send a bunch of CQ's and type your call in to
> https://pskreporter.info/pskmap.html.
>
> 73, Paul K6PO
>
> On Sat, Dec 1, 2018 at 8:50 PM Edfel Rivera  wrote:
>
>> Hi:
>>
>> Your callsign is?
>>
>> Could check,  I am at 40m, KP4AJ
>>
>> On Sat, Dec 1, 2018 at 11:45 PM Bill Pence  wrote:
>>
>>> Yep
>>>  I see lots of cq ru using rc5. Few answers when i reply.
>>>
>>> On Sat, Dec 1, 2018, 11:40 PM Edfel Rivera >>
 Hi:

 Be sure to use frequencies 7080 40m, 14130 20m.  Also clock sync is
 essential.  UTC diff no more than 1.5 seconds.  RC5 testing HUGE today (day
 and night).  Worked bunch stations.

 73'

 Edfel
 KP4AJ

 On Sat, Dec 1, 2018 at 11:33 PM Dave Barr 
 wrote:

> During the FT8 Roundup, I am decoding only a fraction of the signals I
> can hear and see on the water fall.  RX selectivity is wide.  RF gain
> has been lowered.  The rx level bar hovers between 50 and 60.  Yet I
> decode only a few, or one, or none of the signals present.  Earlier
> RCs
> and 1.9 had no such problem.  Any ideas?
>
> Dave, K2YG
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
 ___
 wsjt-devel mailing list
 wsjt-devel@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/wsjt-devel

>>> ___
>>> wsjt-devel mailing list
>>> wsjt-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Very few decodes with RC5

[Roy Gould]

Everything worked well for me. I had a lot of decodes and contacts. My best
DX was Finland. The key commands of shift + F12 and shift +F11 to move the
xmt freq up or down 60 Hz was very handy. And being able to extend the
bandwidth using ctrl + shift +  F12 by 2 KHz was great. I made most of my
contacts with a dial freq of 14.132 MHz.

W7IDM


On Sat, Dec 1, 2018 at 10:19 PM Paul Kube  wrote:

> Or, send a bunch of CQ's and type your call in to
> https://pskreporter.info/pskmap.html.
>
> 73, Paul K6PO
>
> On Sat, Dec 1, 2018 at 8:50 PM Edfel Rivera  wrote:
>
>> Hi:
>>
>> Your callsign is?
>>
>> Could check,  I am at 40m, KP4AJ
>>
>> On Sat, Dec 1, 2018 at 11:45 PM Bill Pence  wrote:
>>
>>> Yep
>>>  I see lots of cq ru using rc5. Few answers when i reply.
>>>
>>> On Sat, Dec 1, 2018, 11:40 PM Edfel Rivera >>
 Hi:

 Be sure to use frequencies 7080 40m, 14130 20m.  Also clock sync is
 essential.  UTC diff no more than 1.5 seconds.  RC5 testing HUGE today (day
 and night).  Worked bunch stations.

 73'

 Edfel
 KP4AJ

 On Sat, Dec 1, 2018 at 11:33 PM Dave Barr 
 wrote:

> During the FT8 Roundup, I am decoding only a fraction of the signals I
> can hear and see on the water fall.  RX selectivity is wide.  RF gain
> has been lowered.  The rx level bar hovers between 50 and 60.  Yet I
> decode only a few, or one, or none of the signals present.  Earlier
> RCs
> and 1.9 had no such problem.  Any ideas?
>
> Dave, K2YG
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
 ___
 wsjt-devel mailing list
 wsjt-devel@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/wsjt-devel

>>> ___
>>> wsjt-devel mailing list
>>> wsjt-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Very few decodes with RC5

[Paul Kube]

Or, send a bunch of CQ's and type your call in to
https://pskreporter.info/pskmap.html.

73, Paul K6PO

On Sat, Dec 1, 2018 at 8:50 PM Edfel Rivera  wrote:

> Hi:
>
> Your callsign is?
>
> Could check,  I am at 40m, KP4AJ
>
> On Sat, Dec 1, 2018 at 11:45 PM Bill Pence  wrote:
>
>> Yep
>>  I see lots of cq ru using rc5. Few answers when i reply.
>>
>> On Sat, Dec 1, 2018, 11:40 PM Edfel Rivera >
>>> Hi:
>>>
>>> Be sure to use frequencies 7080 40m, 14130 20m.  Also clock sync is
>>> essential.  UTC diff no more than 1.5 seconds.  RC5 testing HUGE today (day
>>> and night).  Worked bunch stations.
>>>
>>> 73'
>>>
>>> Edfel
>>> KP4AJ
>>>
>>> On Sat, Dec 1, 2018 at 11:33 PM Dave Barr  wrote:
>>>
 During the FT8 Roundup, I am decoding only a fraction of the signals I
 can hear and see on the water fall.  RX selectivity is wide.  RF gain
 has been lowered.  The rx level bar hovers between 50 and 60.  Yet I
 decode only a few, or one, or none of the signals present.  Earlier RCs
 and 1.9 had no such problem.  Any ideas?

 Dave, K2YG



 ___
 wsjt-devel mailing list
 wsjt-devel@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/wsjt-devel

>>> ___
>>> wsjt-devel mailing list
>>> wsjt-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Very few decodes with RC5

[Edfel Rivera]

Hi:

Your callsign is?

Could check,  I am at 40m, KP4AJ

On Sat, Dec 1, 2018 at 11:45 PM Bill Pence  wrote:

> Yep
>  I see lots of cq ru using rc5. Few answers when i reply.
>
> On Sat, Dec 1, 2018, 11:40 PM Edfel Rivera 
>> Hi:
>>
>> Be sure to use frequencies 7080 40m, 14130 20m.  Also clock sync is
>> essential.  UTC diff no more than 1.5 seconds.  RC5 testing HUGE today (day
>> and night).  Worked bunch stations.
>>
>> 73'
>>
>> Edfel
>> KP4AJ
>>
>> On Sat, Dec 1, 2018 at 11:33 PM Dave Barr  wrote:
>>
>>> During the FT8 Roundup, I am decoding only a fraction of the signals I
>>> can hear and see on the water fall.  RX selectivity is wide.  RF gain
>>> has been lowered.  The rx level bar hovers between 50 and 60.  Yet I
>>> decode only a few, or one, or none of the signals present.  Earlier RCs
>>> and 1.9 had no such problem.  Any ideas?
>>>
>>> Dave, K2YG
>>>
>>>
>>>
>>> ___
>>> wsjt-devel mailing list
>>> wsjt-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Very few decodes with RC5

[Black Michael via wsjt-devel]

What frequency are you on?


 

On Saturday, December 1, 2018, 10:33:56 PM CST, Dave Barr 
 wrote:  
 
 During the FT8 Roundup, I am decoding only a fraction of the signals I 
can hear and see on the water fall.  RX selectivity is wide.  RF gain 
has been lowered.  The rx level bar hovers between 50 and 60.  Yet I 
decode only a few, or one, or none of the signals present.  Earlier RCs 
and 1.9 had no such problem.  Any ideas?

Dave, K2YG



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Very few decodes with RC5

[Bill Pence]

Yep
 I see lots of cq ru using rc5. Few answers when i reply.

On Sat, Dec 1, 2018, 11:40 PM Edfel Rivera  Hi:
>
> Be sure to use frequencies 7080 40m, 14130 20m.  Also clock sync is
> essential.  UTC diff no more than 1.5 seconds.  RC5 testing HUGE today (day
> and night).  Worked bunch stations.
>
> 73'
>
> Edfel
> KP4AJ
>
> On Sat, Dec 1, 2018 at 11:33 PM Dave Barr  wrote:
>
>> During the FT8 Roundup, I am decoding only a fraction of the signals I
>> can hear and see on the water fall.  RX selectivity is wide.  RF gain
>> has been lowered.  The rx level bar hovers between 50 and 60.  Yet I
>> decode only a few, or one, or none of the signals present.  Earlier RCs
>> and 1.9 had no such problem.  Any ideas?
>>
>> Dave, K2YG
>>
>>
>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Problem with Contest Data and N1MM+ feed?

[David Kaplan via wsjt-devel]

I made a few QSOs with RC5 feeding MacLoggerDX the N1MM+ data. The main QSO 
information came through fine, but there was no exchange data for my log..

An exchange of 539 NJ from K1JT is apparently built from 539 and 
NJ, 
and 549 0044 for CE1OEB from 549 and 0044.

It doesn’t seem as if you send a STX_STRING or SRX_STRING in the N1MM+ data 
which MacLoggerDX would need to populate my log..

I can send the full ADIF if you want

Am I interpreting this correctly?

Thanks.

David, WA1OUI

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Very few decodes with RC5

[Edfel Rivera]

Hi:

Be sure to use frequencies 7080 40m, 14130 20m.  Also clock sync is
essential.  UTC diff no more than 1.5 seconds.  RC5 testing HUGE today (day
and night).  Worked bunch stations.

73'

Edfel
KP4AJ

On Sat, Dec 1, 2018 at 11:33 PM Dave Barr  wrote:

> During the FT8 Roundup, I am decoding only a fraction of the signals I
> can hear and see on the water fall.  RX selectivity is wide.  RF gain
> has been lowered.  The rx level bar hovers between 50 and 60.  Yet I
> decode only a few, or one, or none of the signals present.  Earlier RCs
> and 1.9 had no such problem.  Any ideas?
>
> Dave, K2YG
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Very few decodes with RC5

[Bill Pence]

I have opposite. I decode many, but few qso's...
I guess I am in a propagation hole right now

On Sat, Dec 1, 2018, 11:34 PM Dave Barr  During the FT8 Roundup, I am decoding only a fraction of the signals I
> can hear and see on the water fall.  RX selectivity is wide.  RF gain
> has been lowered.  The rx level bar hovers between 50 and 60.  Yet I
> decode only a few, or one, or none of the signals present.  Earlier RCs
> and 1.9 had no such problem.  Any ideas?
>
> Dave, K2YG
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Very few decodes with RC5

[Dave Barr]

During the FT8 Roundup, I am decoding only a fraction of the signals I 
can hear and see on the water fall.  RX selectivity is wide.  RF gain 
has been lowered.  The rx level bar hovers between 50 and 60.  Yet I 
decode only a few, or one, or none of the signals present.  Earlier RCs 
and 1.9 had no such problem.  Any ideas?


Dave, K2YG



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Edfel Rivera]

Hi:

Forgot to tell (previous post) those recent QSO were using TAB1.

Edfel
KP4AJ

On Sat, Dec 1, 2018 at 10:08 PM Edfel Rivera  wrote:

> Hi All:
>
> Well, after editing the 569 0064 to 569 FL (row 26) QSO are logging again
> and nicely.  What was the problem, not sure but Recevd 569 0064 was the
> only thing I changed to get the QSO saving again.  See below.  QSO time
> reflects how long this issue interrupted QSO logging. BTW, QSO logging nice
> feature and way superior than anything else.
>
> 73'
>
> Edfel
> KP4AJ
>
> On Sat, Dec 1, 2018 at 9:56 PM Jim Shorney  wrote:
>
>>
>> That seems to have been the problem with my WL7CG contact. I manually
>> created a log entry and it accepted it this time. Now, however, I am trying
>> to correct the hand in the log to 20m, but 20m does not show up on the
>> selection list when on that line. In fact, it only seems to show up on the
>> list for entries that are already listed as 20m. Likewise, 40m shows up on
>> the selection only for entries already in the log as 40m. Th bands that do
>> show on the list are band that have no logged entries. Does this make
>> sense, or am I explaining it badly?
>>
>> And the time got bumped up six hours when I tried to edit band/freq
>>
>> 73
>>
>> -Jim
>> NU0C
>>
>> On Sun, 2 Dec 2018 02:35:41 +
>> Bill Somerville  wrote:
>>
>> > Hi Edfel,
>> >
>> > sorry I was not clear. The edits I am referring to are to the Contest
>> > Log window rows. As it stands in WSJT-X v2.0.0 RC5 edits to fields in
>> > the Contest Log window table are not committed until you change the
>> > focus to another row. Until you do that pending edits will block the
>> > addition of a new QSO. This was not intended and it will be fixed.
>> >
>> > 73
>> > Bill
>> > G4WJS.
>> >
>> > On 02/12/2018 02:29, Edfel Rivera wrote:
>> > > Hi Bill:
>> > >
>> > > I filled those fields (operator, name) because fields were empty (not
>> > > populated by the program) and because program pop up message was
>> > > Invalid QSO. Was a way to test if that empty fields were the reason
>> > > for the error.  Anyway, Invalid QSO popups keeps happening and they
>> > > are empty at those fields.
>> > >
>> > > Thanks.
>> > >
>> > > Edfel
>> > >
>> > >
>> > > On Sat, Dec 1, 2018 at 9:03 PM Bill Somerville > > > > wrote:
>> > >
>> > > Hi Edfel,
>> > >
>> > > I am fairly certain that the logging lockout when al the required
>> > > fields are populated is related to unsaved edits to the contest
>> > > log window. As it stands you have to move to another row to commit
>> > > any edits, then you can log a new row.
>> > >
>> > > I am surprised how many reports of this there are, what is
>> > > requiring editing on the contest log window?
>> > >
>> > > 73
>> > > Bill
>> > > G4WJS.
>>
>>
>>
>> --
>> Any project worth its salt has an LED.  - WB8VGE
>>
>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Edfel Rivera]

Hi All:

Well, after editing the 569 0064 to 569 FL (row 26) QSO are logging again
and nicely.  What was the problem, not sure but Recevd 569 0064 was the
only thing I changed to get the QSO saving again.  See below.  QSO time
reflects how long this issue interrupted QSO logging. BTW, QSO logging nice
feature and way superior than anything else.

73'

Edfel
KP4AJ

On Sat, Dec 1, 2018 at 9:56 PM Jim Shorney  wrote:

>
> That seems to have been the problem with my WL7CG contact. I manually
> created a log entry and it accepted it this time. Now, however, I am trying
> to correct the hand in the log to 20m, but 20m does not show up on the
> selection list when on that line. In fact, it only seems to show up on the
> list for entries that are already listed as 20m. Likewise, 40m shows up on
> the selection only for entries already in the log as 40m. Th bands that do
> show on the list are band that have no logged entries. Does this make
> sense, or am I explaining it badly?
>
> And the time got bumped up six hours when I tried to edit band/freq
>
> 73
>
> -Jim
> NU0C
>
> On Sun, 2 Dec 2018 02:35:41 +
> Bill Somerville  wrote:
>
> > Hi Edfel,
> >
> > sorry I was not clear. The edits I am referring to are to the Contest
> > Log window rows. As it stands in WSJT-X v2.0.0 RC5 edits to fields in
> > the Contest Log window table are not committed until you change the
> > focus to another row. Until you do that pending edits will block the
> > addition of a new QSO. This was not intended and it will be fixed.
> >
> > 73
> > Bill
> > G4WJS.
> >
> > On 02/12/2018 02:29, Edfel Rivera wrote:
> > > Hi Bill:
> > >
> > > I filled those fields (operator, name) because fields were empty (not
> > > populated by the program) and because program pop up message was
> > > Invalid QSO. Was a way to test if that empty fields were the reason
> > > for the error.  Anyway, Invalid QSO popups keeps happening and they
> > > are empty at those fields.
> > >
> > > Thanks.
> > >
> > > Edfel
> > >
> > >
> > > On Sat, Dec 1, 2018 at 9:03 PM Bill Somerville  > > > wrote:
> > >
> > > Hi Edfel,
> > >
> > > I am fairly certain that the logging lockout when al the required
> > > fields are populated is related to unsaved edits to the contest
> > > log window. As it stands you have to move to another row to commit
> > > any edits, then you can log a new row.
> > >
> > > I am surprised how many reports of this there are, what is
> > > requiring editing on the contest log window?
> > >
> > > 73
> > > Bill
> > > G4WJS.
>
>
>
> --
> Any project worth its salt has an LED.  - WB8VGE
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Bill Somerville]

On 02/12/2018 02:52, Jim Shorney wrote:

I manually created a log entry and it accepted it this time. Now, however, I am 
trying to correct the hand in the log to 20m, but 20m does not show up on the 
selection list when on that line. In fact, it only seems to show up on the list 
for entries that are already listed as 20m. Likewise, 40m shows up on the 
selection only for entries already in the log as 40m. Th bands that do show on 
the list are band that have no logged entries. Does this make sense, or am I 
explaining it badly?


Hi Jim,

I cannot reproduce your issue with editing the band in the Contest Log. 
When I try here I get a drop down selection with all bands available on 
it, like this:


are you seeing something different from that?

73
Bill
G4WJS.

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Jim Shorney]

That seems to have been the problem with my WL7CG contact. I manually created a 
log entry and it accepted it this time. Now, however, I am trying to correct 
the hand in the log to 20m, but 20m does not show up on the selection list when 
on that line. In fact, it only seems to show up on the list for entries that 
are already listed as 20m. Likewise, 40m shows up on the selection only for 
entries already in the log as 40m. Th bands that do show on the list are band 
that have no logged entries. Does this make sense, or am I explaining it badly?

And the time got bumped up six hours when I tried to edit band/freq

73

-Jim
NU0C

On Sun, 2 Dec 2018 02:35:41 +
Bill Somerville  wrote:

> Hi Edfel,
> 
> sorry I was not clear. The edits I am referring to are to the Contest 
> Log window rows. As it stands in WSJT-X v2.0.0 RC5 edits to fields in 
> the Contest Log window table are not committed until you change the 
> focus to another row. Until you do that pending edits will block the 
> addition of a new QSO. This was not intended and it will be fixed.
> 
> 73
> Bill
> G4WJS.
> 
> On 02/12/2018 02:29, Edfel Rivera wrote:
> > Hi Bill:
> >
> > I filled those fields (operator, name) because fields were empty (not 
> > populated by the program) and because program pop up message was 
> > Invalid QSO. Was a way to test if that empty fields were the reason 
> > for the error.  Anyway, Invalid QSO popups keeps happening and they 
> > are empty at those fields.
> >
> > Thanks.
> >
> > Edfel
> >
> >
> > On Sat, Dec 1, 2018 at 9:03 PM Bill Somerville  > > wrote:
> >
> > Hi Edfel,
> >
> > I am fairly certain that the logging lockout when al the required
> > fields are populated is related to unsaved edits to the contest
> > log window. As it stands you have to move to another row to commit
> > any edits, then you can log a new row.
> >
> > I am surprised how many reports of this there are, what is
> > requiring editing on the contest log window?
> >
> > 73
> > Bill
> > G4WJS.



--
Any project worth its salt has an LED.  - WB8VGE


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Edfel Rivera]

Hi:

Well, this is nonsense.  After editing last recorded QSO which received
column was 569 0064 for LW5DR .  I changed to FL just to test.  Be assured
I didn't edited that file in anyway before trying this. After that QSO were
again saved.  I have worked:

023330 -24 0.1 1564 ~ KP4AJ MI0LLG RR73


Will continue testing.


Sorry, I don't like to report problems. But is the only way to tell what
seems to be not working as should.


73'


Edfel

KP4AJ

On Sat, Dec 1, 2018 at 9:29 PM Edfel Rivera  wrote:

> Hi Bill:
>
> I filled those fields (operator, name) because fields were empty (not
> populated by the program) and because program pop up message was Invalid
> QSO. Was a way to test if that empty fields were the reason for the error.
> Anyway, Invalid QSO popups keeps happening and they are empty at those
> fields.
>
> Thanks.
>
> Edfel
>
>
> On Sat, Dec 1, 2018 at 9:03 PM Bill Somerville 
> wrote:
>
>> Hi Edfel,
>>
>> I am fairly certain that the logging lockout when al the required fields
>> are populated is related to unsaved edits to the contest log window. As it
>> stands you have to move to another row to commit any edits, then you can
>> log a new row.
>>
>> I am surprised how many reports of this there are, what is requiring
>> editing on the contest log window?
>>
>> 73
>> Bill
>> G4WJS.
>>
>> On 01/12/2018 22:32, Edfel Rivera wrote:
>>
>> Hi:
>>
>> QSO below was refused to Log into ContestLog. ContestLog have 26 entries
>> also other QSO after that was logged.  Not sure why but had to cancel
>> logging of N5OK QSO.
>>
>> Thanks.
>>
>> 73'
>>
>> Edfel
>> KP4AJ
>>
>> n5ok.JPG
>>
>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Bill Somerville]

Hi Edfel,

sorry I was not clear. The edits I am referring to are to the Contest 
Log window rows. As it stands in WSJT-X v2.0.0 RC5 edits to fields in 
the Contest Log window table are not committed until you change the 
focus to another row. Until you do that pending edits will block the 
addition of a new QSO. This was not intended and it will be fixed.


73
Bill
G4WJS.

On 02/12/2018 02:29, Edfel Rivera wrote:

Hi Bill:

I filled those fields (operator, name) because fields were empty (not 
populated by the program) and because program pop up message was 
Invalid QSO. Was a way to test if that empty fields were the reason 
for the error.  Anyway, Invalid QSO popups keeps happening and they 
are empty at those fields.


Thanks.

Edfel


On Sat, Dec 1, 2018 at 9:03 PM Bill Somerville > wrote:


Hi Edfel,

I am fairly certain that the logging lockout when al the required
fields are populated is related to unsaved edits to the contest
log window. As it stands you have to move to another row to commit
any edits, then you can log a new row.

I am surprised how many reports of this there are, what is
requiring editing on the contest log window?

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Edfel Rivera]

Hi Bill:

I filled those fields (operator, name) because fields were empty (not
populated by the program) and because program pop up message was Invalid
QSO. Was a way to test if that empty fields were the reason for the error.
Anyway, Invalid QSO popups keeps happening and they are empty at those
fields.

Thanks.

Edfel


On Sat, Dec 1, 2018 at 9:03 PM Bill Somerville 
wrote:

> Hi Edfel,
>
> I am fairly certain that the logging lockout when al the required fields
> are populated is related to unsaved edits to the contest log window. As it
> stands you have to move to another row to commit any edits, then you can
> log a new row.
>
> I am surprised how many reports of this there are, what is requiring
> editing on the contest log window?
>
> 73
> Bill
> G4WJS.
>
> On 01/12/2018 22:32, Edfel Rivera wrote:
>
> Hi:
>
> QSO below was refused to Log into ContestLog. ContestLog have 26 entries
> also other QSO after that was logged.  Not sure why but had to cancel
> logging of N5OK QSO.
>
> Thanks.
>
> 73'
>
> Edfel
> KP4AJ
>
> n5ok.JPG
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Edfel Rivera]

Hi JIm:

Yes, I tried that too.  Name is not more there long ago.

Thanks!

Edfel
KP4AJ


On Sat, Dec 1, 2018 at 8:57 PM Jim Shorney  wrote:

>
> I don't know if there is any kind of check on the Operator field for
> something that looks like a valid call, but you may want to put your call
> in there anyway. Having your name in there is bound to confuse some
> software somewhere...  :)
>
> 73
>
> -Jim
> NU0C
>
>
> On Sat, 1 Dec 2018 20:41:37 -0500
> Edfel Rivera  wrote:
>
> > Hi Jim:
> >
> > See the another popup window 'Invalid QSO' below, at capture you are
> > refering, I tried placing my name in Operator to see if having that field
> > blank was the problem.  There are also others with similar problem:
> >
> >
> https://mail.google.com/mail/u/0/#inbox/QgrcJHrjBQfqKcQGxpzNBkSHmpVzzlKMjDV
> >
> > 73
> > Edfel
> > KP4AJ
>
> --
> “There’s something out of place – let’s go and poke it with a stick.” –
> The Doctor, "Amy’s Choice"
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Bill Somerville]

Hi Edfel,

I am fairly certain that the logging lockout when al the required fields 
are populated is related to unsaved edits to the contest log window. As 
it stands you have to move to another row to commit any edits, then you 
can log a new row.


I am surprised how many reports of this there are, what is requiring 
editing on the contest log window?


73
Bill
G4WJS.

On 01/12/2018 22:32, Edfel Rivera wrote:

Hi:

QSO below was refused to Log into ContestLog. ContestLog have 26 
entries also other QSO after that was logged.  Not sure why but had to 
cancel logging of N5OK QSO.


Thanks.

73'

Edfel
KP4AJ

n5ok.JPG



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Jim Shorney]

I don't know if there is any kind of check on the Operator field for something 
that looks like a valid call, but you may want to put your call in there 
anyway. Having your name in there is bound to confuse some software 
somewhere...  :)

73

-Jim
NU0C


On Sat, 1 Dec 2018 20:41:37 -0500
Edfel Rivera  wrote:

> Hi Jim:
> 
> See the another popup window 'Invalid QSO' below, at capture you are
> refering, I tried placing my name in Operator to see if having that field
> blank was the problem.  There are also others with similar problem:
> 
> https://mail.google.com/mail/u/0/#inbox/QgrcJHrjBQfqKcQGxpzNBkSHmpVzzlKMjDV
> 
> 73
> Edfel
> KP4AJ

--
“There’s something out of place – let’s go and poke it with a stick.” – The 
Doctor, "Amy’s Choice"


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Edfel Rivera]

Hi Jim:

See the another popup window 'Invalid QSO' below, at capture you are
refering, I tried placing my name in Operator to see if having that field
blank was the problem.  There are also others with similar problem:

https://mail.google.com/mail/u/0/#inbox/QgrcJHrjBQfqKcQGxpzNBkSHmpVzzlKMjDV

73
Edfel
KP4AJ


On Sat, Dec 1, 2018 at 8:19 PM Jim Shorney  wrote:

>
> I wonder if it does not like that you have your name in the OPERATOR field
> instead of your callsign. AFAIK the ADIF field that this maps to is for
> operator call, which CAN be different from the station call under certain
> circumstances.
>
> 73
> -Jim
> NU0C
>
> On Sat, 1 Dec 2018 17:32:38 -0500
> Edfel Rivera  wrote:
>
> > Hi:
> >
> > QSO below was refused to Log into ContestLog. ContestLog have 26 entries
> > also other QSO after that was logged.  Not sure why but had to cancel
> > logging of N5OK QSO.
> >
> > Thanks.
> >
> > 73'
> >
> > Edfel
> > KP4AJ
>
>
> --
> “There’s something out of place – let’s go and poke it with a stick.” –
> The Doctor, "Amy’s Choice"
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Access Configuration Changes Frequency

[Edfel Rivera]

Hi Bill:

Not big deal or a must.  Probably when working with standard frequencies
the 'anomaly' is negligible.

Thank you all development team!!

Edfel
KP4AJ






On Sat, Dec 1, 2018 at 8:18 PM Bill Somerville 
wrote:

> On 02/12/2018 01:09, Edfel Rivera wrote:
> > Hi:
> >
> > If I access configuration (was at 7.080.00, when exit configuration,
> > program sets frequency to 7.078.00.  Just pointing if this is the
> > intended behavior.  IMO when exit configuration screen, frequency
> > should not change.
> >
> > Thanks.
> >
> > Edfel
> > KP4AJ
>
> Hi Edfel,
>
> agreed that is desirable but implementing it is difficult as exiting the
> configuration may have changed the available frequencies. It is on my
> list to try and fix.
>
> 73
> Bill
> G4WJS.
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] not decoding ru

[Neil Zampella]

Andy,

the starting freq for 40m was 7.080 .. it was very busy here in PA.

Neil, KN3ILZ

On 12/1/2018 2:46 PM, Andreas Ma wrote:


Hi David and all

Same problem here. I’m on 7090 (40m as it is nearly 9 p.m. here) 
having plenty of signals in the waterfall display, but very few 
decodes. Changing back to V1.9.1 no decode at all (as expected). 
Changing to 7074 getting dozens of decodes per time slot. Clocks are 
accurate.


Tried this on two different Laptop Computers with Win7 and Win10 and 
of course with V2-rc5. Both the same result. I even cannot decode my 
own signal from one computer to the other one, however no problem to 
decode my own signal with V1.9.1.


73s de Andy, oe3dmb

*Von:*David Pickard [mailto:n...@cableone.net]
*Gesendet:* Samstag, 01. Dezember 2018 20:07
*An:* wsjt-devel@lists.sourceforge.net
*Betreff:* [wsjt-devel] not decoding ru

I have v2-rc5 installed. Worked several stations yesterday on FT8. I 
am currently on 14.130 and hear lots of FT8 signals and see them on 
the waterfall but am showing very few decodes. I moved up 2khz and  
heard lots of signals but no decodes.


--
*David NM5Z*




---
This email has been checked for viruses by AVG.
https://www.avg.com
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Refused to save to ContestLog

[Jim Shorney]

I wonder if it does not like that you have your name in the OPERATOR field 
instead of your callsign. AFAIK the ADIF field that this maps to is for 
operator call, which CAN be different from the station call under certain 
circumstances.

73
-Jim
NU0C

On Sat, 1 Dec 2018 17:32:38 -0500
Edfel Rivera  wrote:

> Hi:
> 
> QSO below was refused to Log into ContestLog. ContestLog have 26 entries
> also other QSO after that was logged.  Not sure why but had to cancel
> logging of N5OK QSO.
> 
> Thanks.
> 
> 73'
> 
> Edfel
> KP4AJ


--
“There’s something out of place – let’s go and poke it with a stick.” – The 
Doctor, "Amy’s Choice"


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Access Configuration Changes Frequency

[Bill Somerville]

On 02/12/2018 01:09, Edfel Rivera wrote:

Hi:

If I access configuration (was at 7.080.00, when exit configuration, 
program sets frequency to 7.078.00.  Just pointing if this is the 
intended behavior.  IMO when exit configuration screen, frequency 
should not change.


Thanks.

Edfel
KP4AJ


Hi Edfel,

agreed that is desirable but implementing it is difficult as exiting the 
configuration may have changed the available frequencies. It is on my 
list to try and fix.


73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Access Configuration Changes Frequency

[Edfel Rivera]

Hi:

If I access configuration (was at 7.080.00, when exit configuration,
program sets frequency to 7.078.00.  Just pointing if this is the intended
behavior.  IMO when exit configuration screen, frequency should not
change.

Thanks.

Edfel
KP4AJ
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Edfel Rivera]

Bill:

Sorry, yes TAB1 populates  Rcp Sent and Exc Sent but program refuses to log
QSO using both option automatic or Promp me.  Disabled logging so I can
continue.  I even trioed closing everything but WSJTX. I clsed JTAlert,
Firefox.  etc.

Thanks again,

Edfel
KP4AJ

On Sat, Dec 1, 2018 at 7:57 PM Michael Baker  wrote:

> My guess with N3FJP RTTY Log is that everything is looking for AC Log and
> not that log. Sounds like maybe a fix needed in JT Assist..
>
> Mike   K7DD
>
>
> On Sat, Dec 1, 2018 at 4:48 PM Bill Somerville 
> wrote:
>
>> On 02/12/2018 00:25, David Fisher wrote:
>>
>> FWIW, Bill, it’s not particularly obvious that there is a horizontal
>> association between the Field Day / RTTY Roundup options and the “Exch”
>> fields.  They are pretty far apart horizontally from the options they are
>> associated with.  Lots of mistakes will be made in this configuration.
>>
>>
>>
>> Dave / NX6D
>>
>> Hi Dave,
>>
>> you cannot turn on RTTY RU mode or FD mode without entering a valid
>> exchange and if there is an invalid exchange you are thrown back to that
>> field with a helpful message box.
>>
>> 73
>> Bill
>> G4WJS.
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] "New Call", working?

[David Fisher]

No, I didn’t.  Thanks.

Dave / NX6D



From: Bill Somerville 
Sent: Saturday, December 1, 2018 4:33:52 PM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] "New Call", working?

On 02/12/2018 00:17, David Fisher wrote:
Am I right in thinking that the “new call” color coding is not working?  When I 
enable this option, I never see any calls highlighted this way.

Dave / NX6D

Hi Dave,

do you have the "Settings->General->Show DXCC, grid, and worked-before status" 
option checked?

73
Bill
G4WJS.
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Jim Shorney]

I had the same happen with a contact with WL7CG. Nothing I did would make it 
acceptable to the program. I just bailed and will enter it manually later.

73

-Jim
NU0C


On Sat, 1 Dec 2018 17:45:55 -0500
Edfel Rivera  wrote:

> Hi Bill:
> 
> TAB1 populates Recp Sent and Exc Sent, GRID was not populated. However, QSO
> refused to get logged even if I complete blank fields. Similar happen with
> N5OK.
> 
> 73'
> 
> Edfel
> KP4AJ
> 
> On Sat, Dec 1, 2018 at 5:30 PM Bill Somerville 
> wrote:
> 
> > On 01/12/2018 22:20, Dana Myers wrote:  
> > > On 12/1/2018 1:56 PM, Edfel Rivera wrote:  
> > >> Hi Again:
> > >>
> > >> Same happens with "Prompt me to log QSO".  Those fields are not
> > >> populated.
> > >>  
> > >
> > > Same here.
> > >
> > > Dana  K6JQ
> > >  
> > Hi Edfel and Dana,
> >
> > if you are using Tab 2 in WSJT-X then try switching to Tab 1.
> >
> > 73
> > Bill
> > G4WJS.


--
“There’s something out of place – let’s go and poke it with a stick.” – The 
Doctor, "Amy’s Choice"


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Any way to get dupe checking in contest mode?

[Grant VK5GR]

Bill,

Thanks for that explanation. I realise its fairly early days and ok on the 
current limited capabilities in this space.

To make contest mode more viable IMHO it would need to provide dupe feedback on 
any callsign I selected at the time of selection for calling (in search and 
pounce) or as I clicked to answer someone (at which point it should not start 
the answer sequence without some sort of secondary input from the user). 

It might also be important to be able to block callsigns from auto answer in 
run mode (CQ mode) where you give up on a QSO but they keep trying but not 
acknowledging you or simply keep calling without ever progressing. Even if it 
is only a temporary "sin bin" of perhaps 15 minutes. 

I realise these now aren't bug reports but feature requests for a later 
version. However, I feel that some of these fundamentals will be important for 
this to be considered by serious contesters.

Regards,
Grant VK5GR


-Original Message-
From: Bill Somerville [mailto:g4...@classdesign.com] 
Sent: Sunday, 2 December 2018 11:13 AM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Any way to get dupe checking in contest mode?

On 02/12/2018 00:34, Grant VK5GR wrote:
> Keith,
>
> I have been trying to figure out how to get dupe alerts etc too.
>
> N1MM doesn’t do it - because the station is not loaded into the main entry 
> window of N1MM and only appears at the end of the QSO directly into the log 
> via UDP - after the damage has been done so to speak.
>
> WSJT has no dupe checking of it's own either that I can see.
>
> What are others doing to avoid dupes? Is there something I have missed in the 
> config of either N1MM or WSJT here?
>
> Grant VK5GR

Hi Grant,

currently WSJT-X can only help you with detecting dupes when they call 
CQ . To get this working you must move aside your wsjtx_log.adi file 
(you will want to put it back after the contest). Then in 
"Settings->Colors->Decode Highlighting" enable just the "New call on 
band", "My Call in message", "New DXCC on band", "CQ in message", and 
"Transmitted message" colours. "LotW User" is optional. Check the 
"Settings->General->Show DXCC, grid, and worked-before status" option.

Then work anyone who decodes with a colour highlight other than the 
green CQ colour.

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Michael Baker]

My guess with N3FJP RTTY Log is that everything is looking for AC Log and
not that log. Sounds like maybe a fix needed in JT Assist..

Mike   K7DD


On Sat, Dec 1, 2018 at 4:48 PM Bill Somerville 
wrote:

> On 02/12/2018 00:25, David Fisher wrote:
>
> FWIW, Bill, it’s not particularly obvious that there is a horizontal
> association between the Field Day / RTTY Roundup options and the “Exch”
> fields.  They are pretty far apart horizontally from the options they are
> associated with.  Lots of mistakes will be made in this configuration.
>
>
>
> Dave / NX6D
>
> Hi Dave,
>
> you cannot turn on RTTY RU mode or FD mode without entering a valid
> exchange and if there is an invalid exchange you are thrown back to that
> field with a helpful message box.
>
> 73
> Bill
> G4WJS.
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Bill Somerville]

On 02/12/2018 00:25, David Fisher wrote:


FWIW, Bill, it’s not particularly obvious that there is a horizontal 
association between the Field Day / RTTY Roundup options and the 
“Exch” fields.  They are pretty far apart horizontally from the 
options they are associated with. Lots of mistakes will be made in 
this configuration.


Dave / NX6D


Hi Dave,

you cannot turn on RTTY RU mode or FD mode without entering a valid 
exchange and if there is an invalid exchange you are thrown back to that 
field with a helpful message box.


73
Bill
G4WJS.

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Any way to get dupe checking in contest mode?

[Bill Somerville]

On 02/12/2018 00:34, Grant VK5GR wrote:

Keith,

I have been trying to figure out how to get dupe alerts etc too.

N1MM doesn’t do it - because the station is not loaded into the main entry 
window of N1MM and only appears at the end of the QSO directly into the log via 
UDP - after the damage has been done so to speak.

WSJT has no dupe checking of it's own either that I can see.

What are others doing to avoid dupes? Is there something I have missed in the 
config of either N1MM or WSJT here?

Grant VK5GR


Hi Grant,

currently WSJT-X can only help you with detecting dupes when they call 
CQ . To get this working you must move aside your wsjtx_log.adi file 
(you will want to put it back after the contest). Then in 
"Settings->Colors->Decode Highlighting" enable just the "New call on 
band", "My Call in message", "New DXCC on band", "CQ in message", and 
"Transmitted message" colours. "LotW User" is optional. Check the 
"Settings->General->Show DXCC, grid, and worked-before status" option.


Then work anyone who decodes with a colour highlight other than the 
green CQ colour.


73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] "New Call", working?

[Bill Somerville]

On 02/12/2018 00:17, David Fisher wrote:


Am I right in thinking that the “new call” color coding is not 
working?  When I enable this option, I never see any calls highlighted 
this way.


Dave / NX6D


Hi Dave,

do you have the "Settings->General->Show DXCC, grid, and worked-before 
status" option checked?


73
Bill
G4WJS.

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Tim Thorson]

FYI - I am also having N3FJP logging issues at same time. It is"ARRL RTTY"
s/w and API all set up and working (less the data for send report). But
still issue. WSJT-X is sending all data over, less "St/Pr/#" field (I'm
manually inputting this)
[image: image.png]

and WSJT-X returning error:
[image: image.png]

It is listing correctly in WSJT-X Contest Log window...

(I'm having to step out - BRB 1.5 hrs)

-Tim

On Sat, Dec 1, 2018 at 3:37 PM Michael Baker  wrote:

> I tried a full reset of everything. Now it doesn't turn the program off
> but the report fields are still left blank. TAB only moves the cursor.
> Reset the time with Dimension 4 just because.
> Still get "can't log" error message but when the data is put in all is ok.
> For some unknown reason my N3FJP Software is not getting the info.  Rig is
> Flexradio 6300, WSJTX is hooked up to it as a TS2000 and all seems to be
> working there. The Logging program has the Flex API running on COM5 (Slice
> A) and it appears to work but for some reason the two programs are not
> talking to each other.
> Very agrevating when you consider it was working, YESTERDAY and logging
> into ACLog just fine.
>
> Mike DD
>
> On Sat, Dec 1, 2018 at 3:23 PM Tim Thorson  wrote:
>
>> Confirmed -  not value of sent/recv.
>> Going to restart everything...
>>
>> On Sat, Dec 1, 2018 at 3:18 PM Tim Thorson  wrote:
>>
>>> My fields blank = Rpt Sent & Exch sent.
>>>
>>> I enter missing info along with Name and hit [OK]  = error
>>>
>>> Last few QSOs I could not log (auto)
>>>
>>> Q: assume Exch sent would be (for me) "536 CA"  as example..(?)
>>>
>>>
>>> On Sat, Dec 1, 2018 at 3:10 PM Bill Somerville 
>>> wrote:
>>>
 On 01/12/2018 23:03, Tim Thorson wrote:

 Still an issue. Happens (why?) in my case, when sent & Rcvd reports are
 equal/same...  ...still testing,

 Hi Tim,

 is the lockout happening after you have edited a row in the Contest Log
 window?

 73
 Bill
 G4WJS.
 ___
 wsjt-devel mailing list
 wsjt-devel@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/wsjt-devel

>>>
>>>
>>> --
>>> Tim Thorson
>>> 916-572-3467
>>> Amateur: KD6HOF
>>> Grid Square: CM98kv
>>>
>>
>>
>> --
>> Tim Thorson
>> 916-572-3467
>> Amateur: KD6HOF
>> Grid Square: CM98kv
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>


-- 
Tim Thorson
916-572-3467
Amateur: KD6HOF
Grid Square: CM98kv
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] "New Call", working?

[David Fisher]

Am I right in thinking that the “new call” color coding is not working?  When I 
enable this option, I never see any calls highlighted this way.

Dave / NX6D


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Michael Baker]

Well that worked for 1 qso so far but it is working now. Thanks, I was
confusing the TAB1 to the TAB key on the keyboard. Senior moment.

TNX  K7dd


On Sat, Dec 1, 2018 at 3:39 PM Bill Somerville 
wrote:

> On 01/12/2018 23:33, Michael Baker wrote:
> > I tried a full reset of everything. Now it doesn't turn the program
> > off but the report fields are still left blank. TAB only moves the
> > cursor. Reset the time with Dimension 4 just because.
> > Still get "can't log" error message but when the data is put in all is
> ok.
> > For some unknown reason my N3FJP Software is not getting the info.
> > Rig is Flexradio 6300, WSJTX is hooked up to it as a TS2000 and all
> > seems to be working there. The Logging program has the Flex API
> > running on COM5 (Slice A) and it appears to work but for some reason
> > the two programs are not talking to each other.
> > Very agrevating when you consider it was working, YESTERDAY and
> > logging into ACLog just fine.
> >
> > Mike DD
>
> Hi Mike,
>
> try switching to Tab 1 on the WSJT-X main window.
>
> 73
> Bill
> G4WJS.
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Graphic confusion ;-)

[Gary Hinson]

This zombie topic has been around since the early days of FT8.   According to 
some, the arrows point the correct way, according to others they point 
backwards.  Like the arrows, there are arguments both ways.  Clearly, it’s an 
individual thing.  

Would it not be possible (at some future point – not urgently) to make the 
arrow direction a user config option?  

73
Gary  ZL2iFB

 

From: Black Michael via wsjt-devel  
Sent: 02 December 2018 02:24
To: wsjt-devel@lists.sourceforge.net
Cc: Black Michael 
Subject: Re: [wsjt-devel] Graphic confusion ;-)

 

What's confusing is how people interpret the button.

 

It's a data-flow indicator showing the direction of data travel - it's not a 
button which some seem to interpret as pointing to the thing you want to change.

 

It takes a bit of getting used to if you have the 2nd interpretation but 
eventually your brain will click.

 

de Mike W9MDB

 

 

 

 

On Saturday, December 1, 2018, 4:10:56 AM CST, m...@oz5xn.dk 
  mailto:m...@oz5xn.dk> > wrote: 

 

 

Just a single confusing graphic detail that might be corrected: On the two 
buttons for moving TX / RX to the same frequency, the arrows turn illogically 
(remains from 1.9 and earlier). The arrows should turn opposite so they point 
to what you do, i.e. that "Set RX frequency to TX frequency" points from RX to 
TX. It took me some time to get used to making things "wrong" to get the right 
result. :-)

 

Thank you for continuing the great work! :-)

73, Allan

 

 

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net  
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Bill Somerville]

On 01/12/2018 23:33, Michael Baker wrote:
I tried a full reset of everything. Now it doesn't turn the program 
off but the report fields are still left blank. TAB only moves the 
cursor. Reset the time with Dimension 4 just because.

Still get "can't log" error message but when the data is put in all is ok.
For some unknown reason my N3FJP Software is not getting the info.  
Rig is Flexradio 6300, WSJTX is hooked up to it as a TS2000 and all 
seems to be working there. The Logging program has the Flex API 
running on COM5 (Slice A) and it appears to work but for some reason 
the two programs are not talking to each other.
Very agrevating when you consider it was working, YESTERDAY and 
logging into ACLog just fine.


Mike DD


Hi Mike,

try switching to Tab 1 on the WSJT-X main window.

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Tim Thorson]

Confirmed -  not value of sent/recv.
Going to restart everything...

On Sat, Dec 1, 2018 at 3:18 PM Tim Thorson  wrote:

> My fields blank = Rpt Sent & Exch sent.
>
> I enter missing info along with Name and hit [OK]  = error
>
> Last few QSOs I could not log (auto)
>
> Q: assume Exch sent would be (for me) "536 CA"  as example..(?)
>
>
> On Sat, Dec 1, 2018 at 3:10 PM Bill Somerville 
> wrote:
>
>> On 01/12/2018 23:03, Tim Thorson wrote:
>>
>> Still an issue. Happens (why?) in my case, when sent & Rcvd reports are
>> equal/same...  ...still testing,
>>
>> Hi Tim,
>>
>> is the lockout happening after you have edited a row in the Contest Log
>> window?
>>
>> 73
>> Bill
>> G4WJS.
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
>
>
> --
> Tim Thorson
> 916-572-3467
> Amateur: KD6HOF
> Grid Square: CM98kv
>


-- 
Tim Thorson
916-572-3467
Amateur: KD6HOF
Grid Square: CM98kv
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Tim Thorson]

My fields blank = Rpt Sent & Exch sent.

I enter missing info along with Name and hit [OK]  = error

Last few QSOs I could not log (auto)

Q: assume Exch sent would be (for me) "536 CA"  as example..(?)


On Sat, Dec 1, 2018 at 3:10 PM Bill Somerville 
wrote:

> On 01/12/2018 23:03, Tim Thorson wrote:
>
> Still an issue. Happens (why?) in my case, when sent & Rcvd reports are
> equal/same...  ...still testing,
>
> Hi Tim,
>
> is the lockout happening after you have edited a row in the Contest Log
> window?
>
> 73
> Bill
> G4WJS.
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>


-- 
Tim Thorson
916-572-3467
Amateur: KD6HOF
Grid Square: CM98kv
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Bill Somerville]

On 01/12/2018 23:03, Tim Thorson wrote:
Still an issue. Happens (why?) in my case, when sent & Rcvd reports 
are equal/same...  ...still testing,


Hi Tim,

is the lockout happening after you have edited a row in the Contest Log 
window?


73
Bill
G4WJS.

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Tim Thorson]

Still an issue. Happens (why?) in my case, when sent & Rcvd reports are
equal/same...  ...still testing,

On Sat, Dec 1, 2018 at 12:48 PM Edfel Rivera  wrote:

> Hi All:
>
> For those getting annoyed for the popuo telling invalid QSO, you just have
> to fill Rcp Sent and Exc Sent.  Nothing more click ok and QSO is logged.
> That simple.
>
> As feature request, I would like the program to populate the GRID field,
> when possible.
>
> 73'
>
> Edfel
> KP4AJ
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>


-- 
Tim Thorson
916-572-3467
Amateur: KD6HOF
Grid Square: CM98kv
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Edfel Rivera]

Hi Bill:

Not wanting to save QSO here is another.

Thanks again

Edfel

On Sat, Dec 1, 2018 at 5:58 PM Michael Baker  wrote:

> Now mine is closing the program when I hit log entry. UG!
>
> Mike K7DD
>
> On Sat, Dec 1, 2018 at 2:49 PM Edfel Rivera  wrote:
>
>> Hi Bill:
>>
>> TAB1 populates Recp Sent and Exc Sent, GRID was not populated. However,
>> QSO refused to get logged even if I complete blank fields. Similar happen
>> with N5OK.
>>
>> 73'
>>
>> Edfel
>> KP4AJ
>>
>> On Sat, Dec 1, 2018 at 5:30 PM Bill Somerville 
>> wrote:
>>
>>> On 01/12/2018 22:20, Dana Myers wrote:
>>> > On 12/1/2018 1:56 PM, Edfel Rivera wrote:
>>> >> Hi Again:
>>> >>
>>> >> Same happens with "Prompt me to log QSO".  Those fields are not
>>> >> populated.
>>> >>
>>> >
>>> > Same here.
>>> >
>>> > Dana  K6JQ
>>> >
>>> Hi Edfel and Dana,
>>>
>>> if you are using Tab 2 in WSJT-X then try switching to Tab 1.
>>>
>>> 73
>>> Bill
>>> G4WJS.
>>>
>>>
>>>
>>> ___
>>> wsjt-devel mailing list
>>> wsjt-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Bill Somerville]

On 01/12/2018 22:54, Michael Baker wrote:

Now mine is closing the program when I hit log entry. UG!

Mike K7DD


Hi Mike,

any message box with an error?

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Michael Baker]

Now mine is closing the program when I hit log entry. UG!

Mike K7DD

On Sat, Dec 1, 2018 at 2:49 PM Edfel Rivera  wrote:

> Hi Bill:
>
> TAB1 populates Recp Sent and Exc Sent, GRID was not populated. However,
> QSO refused to get logged even if I complete blank fields. Similar happen
> with N5OK.
>
> 73'
>
> Edfel
> KP4AJ
>
> On Sat, Dec 1, 2018 at 5:30 PM Bill Somerville 
> wrote:
>
>> On 01/12/2018 22:20, Dana Myers wrote:
>> > On 12/1/2018 1:56 PM, Edfel Rivera wrote:
>> >> Hi Again:
>> >>
>> >> Same happens with "Prompt me to log QSO".  Those fields are not
>> >> populated.
>> >>
>> >
>> > Same here.
>> >
>> > Dana  K6JQ
>> >
>> Hi Edfel and Dana,
>>
>> if you are using Tab 2 in WSJT-X then try switching to Tab 1.
>>
>> 73
>> Bill
>> G4WJS.
>>
>>
>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Dana Myers]

On 12/1/2018 2:26 PM, Bill Somerville wrote:

On 01/12/2018 22:20, Dana Myers wrote:

On 12/1/2018 1:56 PM, Edfel Rivera wrote:

Hi Again:

Same happens with "Prompt me to log QSO".  Those fields are not populated.



Same here.

Dana  K6JQ


Hi Edfel and Dana,

if you are using Tab 2 in WSJT-X then try switching to Tab 1.


Oh! That fixed it!

Thank you & 73,
Dana  K6JQ



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] FT8 - RTTY RU Small Issue with "SENT"

[AB4IQ]

Same issue here.  Had to insert the sent report before it would go to the log.  
Even after when I did an ADIF file I have stuff to fix.  Instead of the 539 
etc. it just put out 59.  It did recognize it was Digital/FT8.

 

Ed.. AB4IQ

 

From: Scott L. [mailto:sco...@gmail.com] 
Sent: Saturday, December 1, 2018 10:13 AM
To: wsjt-devel@lists.sourceforge.net
Subject: [wsjt-devel] FT8 - RTTY RU Small Issue with "SENT"

 

I'm working some people in the warm ups on 14.130. I've had to manually insert 
my SENT report each time before it will log. Is anyone else having that issue? 
Using RC5 v 737d2f. and I do have "Show DXCC, grid, and worked-before status" 
checked.


I do like how, for example -10 converts automatically to 549 in the contest 
mode. Finally, a contest that's not an automatic 599.

Scott
KN3A  

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Refused to save to ContestLog

[Edfel Rivera]

Hi:

QSO below was refused to Log into ContestLog. ContestLog have 26 entries
also other QSO after that was logged.  Not sure why but had to cancel
logging of N5OK QSO.

Thanks.

73'

Edfel
KP4AJ
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Bill Somerville]

On 01/12/2018 22:20, Dana Myers wrote:

On 12/1/2018 1:56 PM, Edfel Rivera wrote:

Hi Again:

Same happens with "Prompt me to log QSO".  Those fields are not 
populated.




Same here.

Dana  K6JQ


Hi Edfel and Dana,

if you are using Tab 2 in WSJT-X then try switching to Tab 1.

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Dana Myers]

On 12/1/2018 1:56 PM, Edfel Rivera wrote:

Hi Again:

Same happens with "Prompt me to log QSO".  Those fields are not populated.



Same here.

Dana  K6JQ


Thanks.

Edfel

On Sat, Dec 1, 2018 at 4:55 PM Edfel Rivera mailto:edfelj...@gmail.com>> wrote:

Hi Bill:

Thanks for reply.  Enclosed the reporting setting.

73'

Edfel
KP4AJ

On Sat, Dec 1, 2018 at 4:30 PM Bill Somerville mailto:g4...@classdesign.com>> wrote:

On 01/12/2018 20:45, Edfel Rivera wrote:
> For those getting annoyed for the popuo telling invalid QSO, you just
> have to fill Rcp Sent and Exc Sent.  Nothing more click ok and QSO is
> logged. That simple.
>
> As feature request, I would like the program to populate the GRID
> field, when possible.
>
Hi Edfel,

those fields should be being populated automatically. Are you using the
"Log QSO" button to open the Log QSO windows or is it popping up
automatically because you have the "Settings->Reporting->Prompt me to
log QSO" option checked?

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net 

https://lists.sourceforge.net/lists/listinfo/wsjt-devel



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Edfel Rivera]

Hi Again:

Same happens with "Prompt me to log QSO".  Those fields are not populated.

Thanks.

Edfel

On Sat, Dec 1, 2018 at 4:55 PM Edfel Rivera  wrote:

> Hi Bill:
>
> Thanks for reply.  Enclosed the reporting setting.
>
> 73'
>
> Edfel
> KP4AJ
>
> On Sat, Dec 1, 2018 at 4:30 PM Bill Somerville 
> wrote:
>
>> On 01/12/2018 20:45, Edfel Rivera wrote:
>> > For those getting annoyed for the popuo telling invalid QSO, you just
>> > have to fill Rcp Sent and Exc Sent.  Nothing more click ok and QSO is
>> > logged. That simple.
>> >
>> > As feature request, I would like the program to populate the GRID
>> > field, when possible.
>> >
>> Hi Edfel,
>>
>> those fields should be being populated automatically. Are you using the
>> "Log QSO" button to open the Log QSO windows or is it popping up
>> automatically because you have the "Settings->Reporting->Prompt me to
>> log QSO" option checked?
>>
>> 73
>> Bill
>> G4WJS.
>>
>>
>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Edfel Rivera]

Hi Bill:

Thanks for reply.  Enclosed the reporting setting.

73'

Edfel
KP4AJ

On Sat, Dec 1, 2018 at 4:30 PM Bill Somerville 
wrote:

> On 01/12/2018 20:45, Edfel Rivera wrote:
> > For those getting annoyed for the popuo telling invalid QSO, you just
> > have to fill Rcp Sent and Exc Sent.  Nothing more click ok and QSO is
> > logged. That simple.
> >
> > As feature request, I would like the program to populate the GRID
> > field, when possible.
> >
> Hi Edfel,
>
> those fields should be being populated automatically. Are you using the
> "Log QSO" button to open the Log QSO windows or is it popping up
> automatically because you have the "Settings->Reporting->Prompt me to
> log QSO" option checked?
>
> 73
> Bill
> G4WJS.
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] not decoding ru

[David Pickard]

  
  
Synchronized y computer clock with atomic clock and have lots of
  decodes now
NM5Z

On 12/1/2018 1:31 PM, Don Hill AA5AU
  wrote:


  
  
  
  
Check
your clock?
 

  
From:
David Pickard [mailto:n...@cableone.net] 
Sent: Saturday, December 1, 2018 1:07 PM
To: wsjt-devel@lists.sourceforge.net
Subject: [wsjt-devel] not decoding ru
  

 
I have v2-rc5 installed. Worked several stations yesterday on
  FT8. I am currently on 14.130 and hear lots of FT8 signals and
  see them on the waterfall but am showing very few decodes. I
  moved up 2khz and  heard lots of signals but no decodes.

  -- 
David NM5Z

  
  
  
  
  
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


-- 
  David
NM5Z
  


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Bill Somerville]

On 01/12/2018 20:45, Edfel Rivera wrote:
For those getting annoyed for the popuo telling invalid QSO, you just 
have to fill Rcp Sent and Exc Sent.  Nothing more click ok and QSO is 
logged. That simple.


As feature request, I would like the program to populate the GRID 
field, when possible.



Hi Edfel,

those fields should be being populated automatically. Are you using the 
"Log QSO" button to open the Log QSO windows or is it popping up 
automatically because you have the "Settings->Reporting->Prompt me to 
log QSO" option checked?


73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Bill Somerville]

On 01/12/2018 21:13, Edfel Rivera wrote:
My QTH is Puerto Rico, PR is not allowed,  I placed DX. However, first 
box not allows to write there.



Hi Edfel,

the upper box is for entering your ARRL Field Day exchange, it is not 
relevant to ARRL RTTY Roundup mode. DX in the lower box is correct for 
you and other stations not in the 48 contiguous U.S. states, DC, and the 
VE provinces.


73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Edfel Rivera]

Hi Mike:

My QTH is Puerto Rico, PR is not allowed,  I placed DX. However, first box
not allows to write there.

73'

Edfel
KP4AJ

On Sat, Dec 1, 2018 at 4:09 PM Black Michael via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:

> DId you put your state in the Advanced settings for the RTTY Roundup?
>
> de Mike W9MDB
>
>
>
>
> On Saturday, December 1, 2018, 2:49:09 PM CST, Edfel Rivera <
> edfelj...@gmail.com> wrote:
>
>
> Hi All:
>
> For those getting annoyed for the popuo telling invalid QSO, you just have
> to fill Rcp Sent and Exc Sent.  Nothing more click ok and QSO is logged.
> That simple.
>
> As feature request, I would like the program to populate the GRID field,
> when possible.
>
> 73'
>
> Edfel
> KP4AJ
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Invalid QSO - Solution

[Black Michael via wsjt-devel]

DId you put your state in the Advanced settings for the RTTY Roundup?
de Mike W9MDB


 

On Saturday, December 1, 2018, 2:49:09 PM CST, Edfel Rivera 
 wrote:  
 
 Hi All:
For those getting annoyed for the popuo telling invalid QSO, you just have to 
fill Rcp Sent and Exc Sent.  Nothing more click ok and QSO is logged. That 
simple.
As feature request, I would like the program to populate the GRID field, when 
possible.
73'
EdfelKP4AJ
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] not decoding ru

[Andreas Ma]

Hi Edfel,

 

Special Op. / ARRL RTTY was checked right from the start. Don’t know what the 
problem is.

 

73s de Andy, oe3dmb 

 

Von: Edfel Rivera [mailto:edfelj...@gmail.com] 
Gesendet: Samstag, 01. Dezember 2018 20:54
An: WSJT software development
Betreff: Re: [wsjt-devel] not decoding ru

 

Hi Andreas:

 

I worked yesterday night various stations, 7080, be sure to set in Advance 
Special Op and ARRL RTTY.  Right now on 20m 14130 many RC4 -5 Stations and 
decodind!

 

73'

 

Edfel

KP4AJ

 

On Sat, Dec 1, 2018 at 2:51 PM Andreas Ma  wrote:

Hi David and all

 

Same problem here. I’m on 7090 (40m as it is nearly 9 p.m. here) having plenty 
of signals in the waterfall display, but very few decodes. Changing back to 
V1.9.1 no decode at all (as expected). Changing to 7074 getting dozens of 
decodes per time slot. Clocks are accurate.

 

Tried this on two different Laptop Computers with Win7 and Win10 and of course 
with V2-rc5. Both the same result. I even cannot decode my own signal from one 
computer to the other one, however no problem to decode my own signal with 
V1.9.1.

 

73s de Andy, oe3dmb

 

Von: David Pickard [mailto:n...@cableone.net] 
Gesendet: Samstag, 01. Dezember 2018 20:07
An: wsjt-devel@lists.sourceforge.net
Betreff: [wsjt-devel] not decoding ru

 

I have v2-rc5 installed. Worked several stations yesterday on FT8. I am 
currently on 14.130 and hear lots of FT8 signals and see them on the waterfall 
but am showing very few decodes. I moved up 2khz and  heard lots of signals but 
no decodes.

-- 
David NM5Z

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Invalid QSO - Solution

[Edfel Rivera]

Hi All:

For those getting annoyed for the popuo telling invalid QSO, you just have
to fill Rcp Sent and Exc Sent.  Nothing more click ok and QSO is logged.
That simple.

As feature request, I would like the program to populate the GRID field,
when possible.

73'

Edfel
KP4AJ
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] RC5 Crash

[Edfel Rivera]

Hi:

After enlarging WSJTX window stop responding and TAsk Manager was required
to close program

73'

Edfel
KP4AJ.
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC5 - Possible Bug

[Bill Somerville]

On 01/12/2018 19:44, Edfel Rivera wrote:
One thing I have noticed when PPT is active open windows get input and 
not respond to OS as should.  OS Windows 10.  Not sure if others have 
observed this behavior. 


Hi Edfel,

that sounds like RFI disrupting your mouse of keyboard connections. A 
test at low power, into a dummy load, a different band, or aerial should 
confirm.


73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] New Stations (2)

[WB5JJJ]

JT Alert is telling me that there are between 5 and 10 new stations calling
CQ on each time slot to on 14.130 with the RU Test Contest.  Now if these
guys would just stay on v2 after the test, it would be awesome.

-- 
George Cotton, WB5JJJ
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] not decoding ru

[Edfel Rivera]

Hi Andreas:

I worked yesterday night various stations, 7080, be sure to set in Advance
Special Op and ARRL RTTY.  Right now on 20m 14130 many RC4 -5 Stations and
decodind!

73'

Edfel
KP4AJ

On Sat, Dec 1, 2018 at 2:51 PM Andreas Ma  wrote:

> Hi David and all
>
>
>
> Same problem here. I’m on 7090 (40m as it is nearly 9 p.m. here) having
> plenty of signals in the waterfall display, but very few decodes. Changing
> back to V1.9.1 no decode at all (as expected). Changing to 7074 getting
> dozens of decodes per time slot. Clocks are accurate.
>
>
>
> Tried this on two different Laptop Computers with Win7 and Win10 and of
> course with V2-rc5. Both the same result. I even cannot decode my own
> signal from one computer to the other one, however no problem to decode my
> own signal with V1.9.1.
>
>
>
> 73s de Andy, oe3dmb
>
>
>
> *Von:* David Pickard [mailto:n...@cableone.net]
> *Gesendet:* Samstag, 01. Dezember 2018 20:07
> *An:* wsjt-devel@lists.sourceforge.net
> *Betreff:* [wsjt-devel] not decoding ru
>
>
>
> I have v2-rc5 installed. Worked several stations yesterday on FT8. I am
> currently on 14.130 and hear lots of FT8 signals and see them on the
> waterfall but am showing very few decodes. I moved up 2khz and  heard lots
> of signals but no decodes.
>
> --
> *David NM5Z*
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] what is rtty mode?

[Edfel Rivera]

Hi:

Configuration --> Advance --> Special Operating [x] -- > ARRL RTTY [x] and
yes goto 14130 whwre testing on 20m is huge.

73'

Edfel
KP4AJ

On Sat, Dec 1, 2018 at 2:18 PM WB5JJJ  wrote:

> These stations with 5xx numbers should NOT be operating on the standard
> FT8 frequencies.  They are operating as RTTY Round Up, but that starts on
> 14.130 and up to 14.150 and similar on other bands.
>
>
> On Sat, Dec 1, 2018 at 1:12 PM Dale Wheeler via wsjt-devel <
> wsjt-devel@lists.sourceforge.net> wrote:
>
>> Using win 10
>> Running ver. 2.0 rc5
>>
>> I have received the same pop-up 3 times. It asks if I want to RTTY
>> contest mode (see attached picture). I looked but don't understand the
>> documentation. Am I doing something wrong or is this a bug?
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
>
>
> --
> George Cotton, WB5JJJ
> PO Box 1025
> Russellville, AR  72811
>
> 479.968.7737 Home
> 479.857.7737 Cell
>
> DMR K5CS (Local Repeater) - 310515, CC1, TS2
> DMR Arkansas - 3105
>
> 4
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] not decoding ru

[Andreas Ma]

Hi David and all

 

Same problem here. I’m on 7090 (40m as it is nearly 9 p.m. here) having plenty 
of signals in the waterfall display, but very few decodes. Changing back to 
V1.9.1 no decode at all (as expected). Changing to 7074 getting dozens of 
decodes per time slot. Clocks are accurate.

 

Tried this on two different Laptop Computers with Win7 and Win10 and of course 
with V2-rc5. Both the same result. I even cannot decode my own signal from one 
computer to the other one, however no problem to decode my own signal with 
V1.9.1.

 

73s de Andy, oe3dmb

 

Von: David Pickard [mailto:n...@cableone.net] 
Gesendet: Samstag, 01. Dezember 2018 20:07
An: wsjt-devel@lists.sourceforge.net
Betreff: [wsjt-devel] not decoding ru

 

I have v2-rc5 installed. Worked several stations yesterday on FT8. I am 
currently on 14.130 and hear lots of FT8 signals and see them on the waterfall 
but am showing very few decodes. I moved up 2khz and  heard lots of signals but 
no decodes.

-- 
David NM5Z

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] RC5 - Possible Bug

[Edfel Rivera]

Hi All:

First I am very positive with WSJTX v2 RC5.  Have worked DX many US states,
Poland, Slovenia, and more. One thing I have noticed when PPT is active
open windows get input and not respond to OS as should.  OS Windows 10.
Not sure if others have observed this behavior.

Very pleased with Contest logging feature.  Keep up the excellent work!!

73'

Edfel
KP4AJ
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] not decoding ru

[WB5JJJ]

Check your time sync.  Decoding 20-30 per pass here in Arkansas on 14.130.

On Sat, Dec 1, 2018 at 1:31 PM David Pickard  wrote:

> I have v2-rc5 installed. Worked several stations yesterday on FT8. I am
> currently on 14.130 and hear lots of FT8 signals and see them on the
> waterfall but am showing very few decodes. I moved up 2khz and  heard lots
> of signals but no decodes.
> --
> *David NM5Z*
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>


-- 
George Cotton, WB5JJJ
PO Box 1025
Russellville, AR  72811

479.968.7737 Home
479.857.7737 Cell

DMR K5CS (Local Repeater) - 310515, CC1, TS2
DMR Arkansas - 3105

4
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] not decoding ru

[Don Hill AA5AU]

Check your clock?

 

From: David Pickard [mailto:n...@cableone.net] 
Sent: Saturday, December 1, 2018 1:07 PM
To: wsjt-devel@lists.sourceforge.net
Subject: [wsjt-devel] not decoding ru

 

I have v2-rc5 installed. Worked several stations yesterday on FT8. I am 
currently on 14.130 and hear lots of FT8 signals and see them on the waterfall 
but am showing very few decodes. I moved up 2khz and  heard lots of signals but 
no decodes.

-- 
David NM5Z

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] not decoding ru

[David Pickard]

  
  
I have v2-rc5 installed. Worked several stations yesterday on
  FT8. I am currently on 14.130 and hear lots of FT8 signals and see
  them on the waterfall but am showing very few decodes. I moved up
  2khz and  heard lots of signals but no decodes.

-- 
  David
NM5Z
  


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] New stations on RU today

[WB5JJJ]

A multitude of ANTO's (stateside) on 14.130 for the Round Up.  Looks like a
lot of guys have made the jump to RC5 at least for this test contest.  WF
looks better than 14.074 since everybody is v2 here today.

-- 
George Cotton, WB5JJJ
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] what is rtty mode?

[WB5JJJ]

These stations with 5xx numbers should NOT be operating on the standard FT8
frequencies.  They are operating as RTTY Round Up, but that starts on
14.130 and up to 14.150 and similar on other bands.


On Sat, Dec 1, 2018 at 1:12 PM Dale Wheeler via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:

> Using win 10
> Running ver. 2.0 rc5
>
> I have received the same pop-up 3 times. It asks if I want to RTTY contest
> mode (see attached picture). I looked but don't understand the
> documentation. Am I doing something wrong or is this a bug?
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>


-- 
George Cotton, WB5JJJ
PO Box 1025
Russellville, AR  72811

479.968.7737 Home
479.857.7737 Cell

DMR K5CS (Local Repeater) - 310515, CC1, TS2
DMR Arkansas - 3105

4
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Any way to get dupe checking in contest mode?

[Keith Maton via wsjt-devel]

Running on 80m now but picking out stations I haven’t worked - With only 20 Qs 
in the log it’s fairly easy to see who I’ve worked before but is there any way 
to get dupe checking somehow?

I’m using a Mac so linking to something like N1MM isn’t possible.

73 Keith G6NHU




___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Disable New Grid Colors before test

[Dave Q]

Are you saying to clear the log, export it as a blank log. Then when the 
contest is over export to the already created blank log.  Or just saying make 
sure to clear the log so if there were already entries those would have to be 
edited out of the contest submission. 

Sorry to be dense but this will be my first attempt to submit a contest log. 
But don’t want to waste the time of people who know what they’re doing and may 
be counting on their contact with me.  Doubtful but you never know. 
Dave ..W3DLQ 



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] "FT8 Roundup" mock contest

[Jim Shorney]

I looked at it. Saw the UI screen shots. No thanks. Sticking with WSJT-X.

73

-Jim
NU0C

On Sat, 1 Dec 2018 10:58:27 -0500
Neil Zampella  wrote:

> Nope ...
> 
> Last month .. still using the same encoder/decoder  at least the 
> name of the executable was finally changed last year.
> .. and the UI is horrible.
> 
> Neil, KN3ILZ
> 
> On 12/1/2018 8:07 AM, Wolfgang wrote:
> > Re: [wsjt-devel] "FT8 Roundup" mock contest Hello Neil,
> >
> > sorry,
> >
> > I have to ask this: do you get paid to show your 'clonophobia' ;-)
> >
> > People having a different opinion about UI design. Right now, the
> > pskreporter.info is telling us, 15% of the total number of users
> > using the, from you so hated, 'clones'.
> >
> > When was it the last time, you checked one of the 'clones', before
> > you made such statements?
> >
> > 73 de Wolfgang
> > OE1MWW
> >
> >
> > Saturday, December 1, 2018, 12:57:30 PM, you wrote:
> >  
> > *> For what reason?    The clone teams are using the 77 bit WSJT-X code,
> > > and to many people that program window UI is horrible.  
> >  
> > > Neil, KN3ILZ  
> >
> >
> >
> > *--
> > Amateur radio is the most expensive type of free-of-charge communication!
> > Amateurfunk ist die teuerste Art der kostenlosen Kommunikation!   


--

"Good men don’t need rules. Today is not the day to find out why I have so 
many."  - Doctor Who


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Autoseq did not seem to send R message

[charlie]

Puzzled by this sequence:

180845  Tx  1263 ~  CQ RU G3WDG IO92
180900  -5  0.0 1444 ~  G3WDG WB3D 529 VA
180915  Tx  1263 ~  WB3D G3WDG 559 0002
180930  -4  0.2  464 ~  G3WDG W4RJF 529 NC
180945  Tx  1263 ~  WB3D G3WDG 559 0002
180954  Tx  1263 ~  WB3D G3WDG R 559 0002

cq at 180845
station called me 180900 with report
autoseq replied 180915 with report not R report
same at 180945
manually selected TX3 at 180954

Did I make a newbie error?

Charlie





___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Graphic confusion ;-)

[Bill Somerville]

On 01/12/2018 17:39, Paul Kube wrote:
Bill, You really should change the tooltips though. "Set Tx frequency 
to Rx Frequency" makes it sound like the direction is from Tx to Rx, 
and then the arrows seem to point the "wrong" direction.


Paul,

take the sentence "Set Tx frequency to Rx Frequency", I read the word 
"Set" to mean change or adjust as per definition 12(a) here: 
https://www.merriam-webster.com/dictionary/set .


I find it hard to interpret the sentence as the opposite. If anything 
the arrow direction has potential for different interpretations 
depending on the assumed context, i.e. is it the frequency that is being 
moved or is it something else that has the opposite sense.


As I said, it is an endian type issue. At risk of causing a religious 
war based on pettiness, I crack my boiled eggs at the thin end but I 
don't insist that you should.


73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] TX # spinner in RU Contest mode

[Joe Taylor]

On 12/1/2018 12:33, G3WDG char...@sucklingfamily.free-online.co.uk wrote:

Just wondering what the TX # spinner is used for (located to right of RX
freq combo box) on mainwindow GUI?


For non US/Canada stations, the contest exchange is signal report and 
QSO serial number.


-- Joe, K1JT


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Graphic confusion ;-)

[Paul Kube]

>  . You'll just have to learn the convention and put up with it.

Bill, You really should change the tooltips though. "Set Tx frequency to Rx
Frequency" makes it sound like the direction is from Tx to Rx, and then the
arrows seem to point the "wrong" direction.

"Copy Tx frequency to Rx frequency" or "Push Tx frequency to Rx frequency"
would be less confusing.

73, Paul K6PO

On Sat, Dec 1, 2018 at 9:12 AM Bill Somerville 
wrote:

> On 01/12/2018 10:05, m...@oz5xn.dk wrote:
>
> Just a single confusing graphic detail that might be corrected: On the two
> buttons for moving TX / RX to the same frequency, the arrows turn
> illogically (remains from 1.9 and earlier). The arrows should turn opposite
> so they point to what you do, i.e. that "Set RX frequency to TX frequency"
> points from RX to TX. It took me some time to get used to making things
> "wrong" to get the right result. :-)
>
>
>
> Thank you for continuing the great work! :-)
>
> 73, Allan
>
> Hi Allan,
>
> this is an endian issue (
> https://en.wikipedia.org/wiki/Gulliver%27s_Travels#Part_I:_A_Voyage_to_Lilliput).
> There is no correct resolution that satisfies everyone. You'll just have to
> learn the convention and put up with it.
>
> 73
> Bill
> G4WJS.
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] TX # spinner in RU Contest mode

[charlie]

Just wondering what the TX # spinner is used for (located to right of RX
freq combo box) on mainwindow GUI?

Charlie






___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Graphic confusion ;-)

[Keith Maton via wsjt-devel]

I didn’t even read the tooltip, I just assumed that the arrow on the right 
copied the frequency from the top field to the bottom one.

73 Keith G6NHU




> On 1 Dec 2018, at 17:02, m...@oz5xn.dk wrote:
> 
> Hi Guys,
> 
> You are right guys. Just follow the arrows and ignore the tool tip. Then it 
> works! J
> 
> Thanks! 
> 
> 73, Allan   
>  
> Fra: Frank Kirschner [mailto:frank.kirsch...@gmail.com] 
> Sendt: 1. december 2018 17:32
> Til: al...@nelsson.net; WSJT software development
> Emne: Re: [wsjt-devel] Graphic confusion ;-)
>  
> Allan,
>  
> I think I see the problem. You are misinterpreting the word "to" in the tool 
> tip. If the tool tip for the arrow from Rx to Tx said, "Copy Rx freq to Tx," 
> instead of "Set Tx freq to Rx freq," (and conversely for the other button), 
> would that help?
>  
> Or, as has been suggested, just ignore the tool tip and look at the arrow 
> direction.
>  
> Hope that helps.
>  
> 73,
> Frank
> KF6E
>  
> On Sat, Dec 1, 2018 at 5:10 AM mailto:m...@oz5xn.dk>> wrote:
>> Just a single confusing graphic detail that might be corrected: On the two 
>> buttons for moving TX / RX to the same frequency, the arrows turn 
>> illogically (remains from 1.9 and earlier). The arrows should turn opposite 
>> so they point to what you do, i.e. that "Set RX frequency to TX frequency" 
>> points from RX to TX. It took me some time to get used to making things 
>> "wrong" to get the right result. :-) <>
>>  
>> Thank you for continuing the great work! :-)
>> 73, Allan
>>  
>>  
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net 
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel 
>> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Graphic confusion ;-)

[Bill Somerville]

On 01/12/2018 10:05, m...@oz5xn.dk wrote:


Just a single confusing graphic detail that might be corrected: On the 
two buttons for moving TX / RX to the same frequency, the arrows turn 
illogically (remains from 1.9 and earlier). The arrows should turn 
opposite so they point to what you do, i.e. that "Set RX frequency to 
TX frequency" points from RX to TX. It took me some time to get used 
to making things "wrong" to get the right result. :-)


Thank you for continuing the great work! :-)

73, Allan


Hi Allan,

this is an endian issue 
(https://en.wikipedia.org/wiki/Gulliver%27s_Travels#Part_I:_A_Voyage_to_Lilliput). 
There is no correct resolution that satisfies everyone. You'll just have 
to learn the convention and put up with it.


73
Bill
G4WJS.

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Graphic confusion ;-)

[mail]

Hi Guys,

You are right guys. Just follow the arrows and ignore the tool tip. Then it 
works! J

Thanks! 

73, Allan   

 

Fra: Frank Kirschner [mailto:frank.kirsch...@gmail.com] 
Sendt: 1. december 2018 17:32
Til: al...@nelsson.net; WSJT software development
Emne: Re: [wsjt-devel] Graphic confusion ;-)

 

Allan,

 

I think I see the problem. You are misinterpreting the word "to" in the tool 
tip. If the tool tip for the arrow from Rx to Tx said, "Copy Rx freq to Tx," 
instead of "Set Tx freq to Rx freq," (and conversely for the other button), 
would that help?

 

Or, as has been suggested, just ignore the tool tip and look at the arrow 
direction.

 

Hope that helps.

 

73,

Frank

KF6E

 

On Sat, Dec 1, 2018 at 5:10 AM  wrote:

Just a single confusing graphic detail that might be corrected: On the two 
buttons for moving TX / RX to the same frequency, the arrows turn illogically 
(remains from 1.9 and earlier). The arrows should turn opposite so they point 
to what you do, i.e. that "Set RX frequency to TX frequency" points from RX to 
TX. It took me some time to get used to making things "wrong" to get the right 
result. :-)

 

Thank you for continuing the great work! :-)

73, Allan

 

 

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] RC5 JT65 mode: Numeric characters not written to ALL.TXT

[Karza]

Hello devolpers,

I know that JT65 issues are not high on your list, but when you have 
time please have a look into this:


When using JT65, numeric characers ( 0 - 9 ) are missing from message 
texts in ALL.TXT.


For example, these messages...

..are written to ALL.TXT like this:

2018-12-01 16:15  7.076 MHz  JT65
1615  -2  0.1 1719 #  CQ G4YKQ IO
1616  -7  0.2 2325 #  UA3SFF IU6HWW RR
1617 -20  2.8 1109 #  CQ DL5GBP JN
1617 -22  0.4 1283 #  UA1WFH IK8SVQ R-
1619 -16  2.8 1108 #  CQ DL5GBP JN
1619 -20  0.4 1282 #  UA1WFH IK8SVQ
1619 -23  0.2 1514 #  CQ ER1PB KN

Using WSJT-X v2.0.0-rc5 under Ubuntu 18.04.1 LTS

( I'm sorry if this has been reported before, I tried to search the list 
but did not found this issue reported )


73 de Kari oh2gqc

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Callsign problem?

[Steven Franke via wsjt-devel]

Thanks for the report Drew - I confirm the issue that you described. I’m 
looking at it now, and it’ll be fixed for the GA release.
Steve k9an

> On Dec 1, 2018, at 10:02 AM, Drew White  wrote:
> 
> This morning I attempted an FT8 RC5 connection with C4XMAS.  My initial 
> transmission was truncated after the 'E' in "EN50".  I then removed EN50 from 
> TX1.  His transmissions to me also appears to be truncated. 
> 
> Drew K9CW
> 
> 
> 
> -- 
> **
> * K9CW   DXCC: 363/340  CW: 351/339 (need P5!)
> * K9CW/B running 2 watts on 28.2095 MHz
> *
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Callsign problem?

[Bill Somerville]

On 01/12/2018 16:02, Drew White wrote:
This morning I attempted an FT8 RC5 connection with C4XMAS.  My 
initial transmission was truncated after the 'E' in "EN50".  I then 
removed EN50 from TX1.  His transmissions to me also appears to be 
truncated.


Drew K9CW


Hi Drew,

thanks for the issue report, we are aware of this anomaly. It looks like 
C4XMAS is not being correctly detected as a valid non-standard callsign 
and is causing correctly generated messages to be encoded as free text 
with the usual 13-character limit.


73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Callsign problem?

[Neil Zampella]

Urp .. re-read your post,  RC5 but it wouldn't truncate anything. If 
this were happening more people would have reported this. Even the Tx1 
message should have been fine.

Again, a full screen cap of the entire window would help.

Neil

On 12/1/2018 11:49 AM, Neil Zampella wrote:
Which RC version?    A full screen cap would have helped as it would 
have shown what the last Tx was, etc.


Neil, KN3ILZ


On 12/1/2018 11:02 AM, Drew White wrote:
This morning I attempted an FT8 RC5 connection with C4XMAS.  My 
initial transmission was truncated after the 'E' in "EN50".  I then 
removed EN50 from TX1.  His transmissions to me also appears to be 
truncated.


Drew K9CW



--
**
* K9CW   DXCC: 363/340  CW: 351/339 (need P5!)
* K9CW/B running 2 watts on 28.2095 MHz
*



---
This email has been checked for viruses by AVG.
https://www.avg.com
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Callsign problem?

[Neil Zampella]

Which RC version?    A full screen cap would have helped as it would 
have shown what the last Tx was, etc.


Neil, KN3ILZ


On 12/1/2018 11:02 AM, Drew White wrote:
This morning I attempted an FT8 RC5 connection with C4XMAS.  My 
initial transmission was truncated after the 'E' in "EN50".  I then 
removed EN50 from TX1.  His transmissions to me also appears to be 
truncated.


Drew K9CW



--
**
* K9CW   DXCC: 363/340  CW: 351/339 (need P5!)
* K9CW/B running 2 watts on 28.2095 MHz
*



---
This email has been checked for viruses by AVG.
https://www.avg.com
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] "FT8 Roundup" mock contest

[Frank Kirschner]

Having written database software for mostly non-technical users, I
completely agree. Users love progress, but they hate change. In order to
get enthusiastic adoption of new releases, I had to show it would be
easier, faster, or more powerful for the users.

Hams, on the other hand, are technically-oriented, and I'm a bit surprised
at the reluctance to move forward. I love new releases and exploring the
new capabilities. But that's an engineer talking.

73,
Frank
KF6E

On Sat, Dec 1, 2018 at 11:00 AM Hisashi T Fujinaka 
wrote:

> As someone who actually works in the computer industry on software,
> getting people to upgrade is a mess. I can't tell you about the large
> customers who refuse to update to anything from this decade, but there
> are tons of them.
>
> For a data point, think of how many people (not just hams) are on Win7
> (or even XP).
>
>
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Graphic confusion ;-)

[Frank Kirschner]

Allan,

I think I see the problem. You are misinterpreting the word "to" in the
tool tip. If the tool tip for the arrow from Rx to Tx said, "Copy Rx freq
to Tx," instead of "Set Tx freq to Rx freq," (and conversely for the other
button), would that help?

Or, as has been suggested, just ignore the tool tip and look at the arrow
direction.

Hope that helps.

73,
Frank
KF6E

On Sat, Dec 1, 2018 at 5:10 AM  wrote:

> Just a single confusing graphic detail that might be corrected: On the two
> buttons for moving TX / RX to the same frequency, the arrows turn
> illogically (remains from 1.9 and earlier). The arrows should turn opposite
> so they point to what you do, i.e. that "Set RX frequency to TX frequency"
> points from RX to TX. It took me some time to get used to making things
> "wrong" to get the right result. :-)
>
>
>
> Thank you for continuing the great work! :-)
>
> 73, Allan
>
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Callsign problem?

[Drew White]

This morning I attempted an FT8 RC5 connection with C4XMAS.  My initial 
transmission was truncated after the 'E' in "EN50".  I then removed EN50 
from TX1.  His transmissions to me also appears to be truncated.


Drew K9CW



--
**
* K9CW   DXCC: 363/340  CW: 351/339 (need P5!)
* K9CW/B running 2 watts on 28.2095 MHz
*

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RU logging

[Hisashi T Fujinaka]

Bands were dead here, and I had the same issue but I called VP8LP, got
no answer, called & worked someone else, had VP8LP call me, so I
double-clicked on him, and worked him, but the logging broke. I wasn't
able to tell what was wrong (trying desparately to get VP8 in my log)
but it looks like what happened to Jim.

Lucky, I worked him again later.

I only made four contacts and I thank those who were on the other end.

On Fri, 30 Nov 2018, Jim Shorney wrote:




Lots of fun tonight on 7.080. 20 contacts but it seemed like I had to work 
harder than previous tests. Copied K1JT at -24 for a few minutes, so the band 
definitely was not as good.

I was paying attention to the logging more closely based on some previous 
comments and noted something that seems counter-intuitive to me. Here's the 
scenario:

Call a CQing station with TX2
After two or three cycles with no response I terminate TX
Station subsequently responds to me with TX3
I re-enable transmit with TX4 and complete the contact.
I look at the log pop-up and note that it has not copied his report to me.

Not a big deal to enter it manually before I fire the OK button but is there a 
way to fix this? It would be one less thing to have to look out for in the 
mayhem of a contest.

Apologies if this has been already reported. It has been a challenge keeping up 
with the volume of email the past few days, I can't imagine how the developers 
handle it all!

73 es TNX for all the fantastic work!

-Jim
NU0C

--
Hold tight and pretend it's a plan. - The Doctor, "The Doctor, the Widow and the 
Wardrobe"


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] "FT8 Roundup" mock contest

[Hisashi T Fujinaka]

As someone who actually works in the computer industry on software,
getting people to upgrade is a mess. I can't tell you about the large
customers who refuse to update to anything from this decade, but there
are tons of them.

For a data point, think of how many people (not just hams) are on Win7
(or even XP).

On Sat, 1 Dec 2018, Stephen Ireland wrote:



Serge,


I have been watching here South of the Equator and I can echo your 
observations. From most of what I am observing off groups and
spot databases most comms is intra-US. Almost all comments back here are from 
US stations.



As for your second point ? unification cannot happen when there is aggravation 
and entrenchment  Getting anything to unify in
AR is near impossible; fights and wars always break out ... whether it be for 
leadership of representative organisations or
whether it be on unification of technology (i.e. DMR-MARC vs Brandmeister vs 
other Offshoots).

You even try to prompt for unification (as I do) and you get banned from groups 
or opinions shot down viciously.



Email/Blogs/Posts are an appalling way of gauging intent as the human side is 
lost... and is mostly misconstrued in intent ?



Frankly AR is seen in many circles as an arrogant relic of the past ... For AR 
and any of its projects (i.e. FT8) to survive,
?sucking it up? and others ?backing down from high chairs? is necessary. Middle 
ground... Listening... support even if disagreement
but listening is critical (especially with the FT8v2 upgrade).



AR Is for People and About People in a technical, Regulated Environ. HAM = Help 
All Mankind. People first. Not ego. Not past,
resumes, awards or personal gain. Collective and well-communicated gain = the 
answer; collective and internationally inclusive
gain for NOW and for the FUTURE.



73



Steve I

VK3VM / VK3SIR



Sent from Mail for Windows 10




From: Serge Smirnoff R6YY via wsjt-devel 
Sent: Saturday, December 1, 2018 1:56:22 PM
To: wsjt-devel@lists.sourceforge.net
Cc: Serge Smirnoff R6YY
Subject: Re: [wsjt-devel] "FT8 Roundup" mock contest 
27.11.2018 0:55, Joe Taylor ?:

> Another one-hour "practice contest" is scheduled for Saturday,
> December 1, 0200-0300 UTC


Sir Joe and colleagues, my respect,

I had enough for half an hour. It's boring. USA very weak signals
(100W?), Few stations.
WSJT-X is much better now, but I think there is still a lot of work
ahead. It would be logical to combine the efforts of the WSJT-X and JTDX
teams for the common good.

Have a good day, 73. Serge R6YY







--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] FT8 - RTTY RU Small Issue with "SENT"

[Scott L.]

I'm working some people in the warm ups on 14.130. I've had to manually
insert my SENT report each time before it will log. Is anyone else having
that issue? Using RC5 v 737d2f. and I do have "Show DXCC, grid, and
worked-before status" checked.

I do like how, for example -10 converts automatically to 549 in the contest
mode. Finally, a contest that's not an automatic 599.

Scott
KN3A
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Graphic confusion ;-)

[Neil Zampella]

Allan,

Its doing what it says ... moving the Tx freq (A) in your pic to the Rx 
(B).  So if you clicked on that down arrow, it moves the 2335 DOWN to 
the Rx.   If you clicked on the up arrow it would move the 1317 Rx freq 
(B) UP to the Tx (A).


Neil, KN3ILZ

On 12/1/2018 10:02 AM, m...@oz5xn.dk wrote:


Neil,

Well, that’s exactly how I would like to have it, but it’s not how it 
works here. When moving from A to B – the arrow should point from A to 
B.  My arrows are apparently opposite (see attached photo). Set RX 
frequency to TX frequency on my version ( rc5 737d2f) is the right 
hand button – and the arrow points down (towards the RX frequency). 
Have I missed something here?


Allan, OZ5XN.

*Fra:*Neil Zampella [mailto:ne...@techie.com]
*Sendt:* 1. december 2018 13:09
*Til:* wsjt-devel@lists.sourceforge.net
*Emne:* Re: [wsjt-devel] Graphic confusion ;-)

Allan,

I'm not sure what you're saying, are you talking about V5?.    The 
arrow to move the RX freq to TX points up (away) from the RX to the 
TX, and vice versa.   How is that confusing?   Most people love that 
change.


Neil, KN3ILZ

On 12/1/2018 5:05 AM, m...@oz5xn.dk  wrote:

Just a single confusing graphic detail that might be corrected: On
the two buttons for moving TX / RX to the same frequency, the
arrows turn illogically (remains from 1.9 and earlier). The arrows
should turn opposite so they point to what you do, i.e. that "Set
RX frequency to TX frequency" points from RX to TX. It took me
some time to get used to making things "wrong" to get the right
result. :-)

Thank you for continuing the great work! :-)

73, Allan

Billede fjernet af afsender. 





Virus-free. www.avg.com 
 






---
This email has been checked for viruses by AVG.
https://www.avg.com
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] "FT8 Roundup" mock contest

[Neil Zampella]

Nope ...

Last month .. still using the same encoder/decoder  at least the 
name of the executable was finally changed last year.

.. and the UI is horrible.

Neil, KN3ILZ

On 12/1/2018 8:07 AM, Wolfgang wrote:

Re: [wsjt-devel] "FT8 Roundup" mock contest Hello Neil,

sorry,

I have to ask this: do you get paid to show your 'clonophobia' ;-)

People having a different opinion about UI design. Right now, the
pskreporter.info is telling us, 15% of the total number of users
using the, from you so hated, 'clones'.

When was it the last time, you checked one of the 'clones', before
you made such statements?

73 de Wolfgang
OE1MWW


Saturday, December 1, 2018, 12:57:30 PM, you wrote:

*> For what reason?    The clone teams are using the 77 bit WSJT-X code,
> and to many people that program window UI is horrible.

> Neil, KN3ILZ



*--
Amateur radio is the most expensive type of free-of-charge communication!
Amateurfunk ist die teuerste Art der kostenlosen Kommunikation! 



---
This email has been checked for viruses by AVG.
https://www.avg.com
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Graphic confusion ;-)

[WB5JJJ]

Allan:
Easy fix.  Just ignore the dialog boxes and just follow the arrow
indications.  Works as displayed perfectly

On Sat, Dec 1, 2018 at 9:06 AM  wrote:

> Neil,
>
>
>
> Well, that’s exactly how I would like to have it, but it’s not how it
> works here. When moving from A to B – the arrow should point from A to B.
> My arrows are apparently opposite (see attached photo). Set RX frequency to
> TX frequency on my version ( rc5 737d2f) is the right hand button – and the
> arrow points down (towards the RX frequency). Have I missed something here?
>
>
>
> Allan, OZ5XN.
>
>
>
> *Fra:* Neil Zampella [mailto:ne...@techie.com]
> *Sendt:* 1. december 2018 13:09
> *Til:* wsjt-devel@lists.sourceforge.net
> *Emne:* Re: [wsjt-devel] Graphic confusion ;-)
>
>
>
> Allan,
>
> I'm not sure what you're saying, are you talking about V5?.The arrow
> to move the RX freq to TX points up (away) from the RX to the TX, and vice
> versa.   How is that confusing?   Most people love that change.
>
> Neil, KN3ILZ
>
> On 12/1/2018 5:05 AM, m...@oz5xn.dk wrote:
>
> Just a single confusing graphic detail that might be corrected: On the two
> buttons for moving TX / RX to the same frequency, the arrows turn
> illogically (remains from 1.9 and earlier). The arrows should turn opposite
> so they point to what you do, i.e. that "Set RX frequency to TX frequency"
> points from RX to TX. It took me some time to get used to making things
> "wrong" to get the right result. :-)
>
>
>
> Thank you for continuing the great work! :-)
>
> 73, Allan
>
>
>
>
>
>
>
> [image: Billede fjernet af afsender.]
> 
>
> Virus-free. www.avg.com
> 
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>


-- 
George Cotton, WB5JJJ
PO Box 1025
Russellville, AR  72811

479.968.7737 Home
479.857.7737 Cell

DMR K5CS (Local Repeater) - 310515, CC1, TS2
DMR Arkansas - 3105

4
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Graphic confusion ;-)

[mail]

Neil,

 

Well, that's exactly how I would like to have it, but it's not how it works
here. When moving from A to B - the arrow should point from A to B.  My
arrows are apparently opposite (see attached photo). Set RX frequency to TX
frequency on my version ( rc5 737d2f) is the right hand button - and the
arrow points down (towards the RX frequency). Have I missed something here? 

 

Allan, OZ5XN.

 

Fra: Neil Zampella [mailto:ne...@techie.com] 
Sendt: 1. december 2018 13:09
Til: wsjt-devel@lists.sourceforge.net
Emne: Re: [wsjt-devel] Graphic confusion ;-)

 

Allan,

I'm not sure what you're saying, are you talking about V5?.The arrow to
move the RX freq to TX points up (away) from the RX to the TX, and vice
versa.   How is that confusing?   Most people love that change. 

Neil, KN3ILZ

On 12/1/2018 5:05 AM, m...@oz5xn.dk wrote:

Just a single confusing graphic detail that might be corrected: On the two
buttons for moving TX / RX to the same frequency, the arrows turn
illogically (remains from 1.9 and earlier). The arrows should turn opposite
so they point to what you do, i.e. that "Set RX frequency to TX frequency"
points from RX to TX. It took me some time to get used to making things
"wrong" to get the right result. :-)

 

Thank you for continuing the great work! :-)

73, Allan

 

 

 


 
 Billede fjernet af afsender.

Virus-free.
 www.avg.com 

 

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel