[AFMUG] Fixing fiberglass ladders

Ive got two broken ladders from tech drops. Can you fix these safely? Both tipped out the upper guides and popped through the fiberglass. I just hate to toss 2 otherwise good ladders in the trash

Re: [AFMUG] Fixing fiberglass ladders

I dont figure. Theres that black carbon fiber wrap, i thought about that. Not cause i think it will work but i want to check the tape out On Feb 16, 2018 9:08 PM, "Matt Hoppes" wrote: > I wouldn’t touch them with a 35 1/2 foot pole. > > > On Feb 16, 2018, at

Re: [AFMUG] Spam from Chuck

We could take turns on the boring machine and play a game of utility shootout. Third place is a water line, second place is communications and first place is a gas line. Kind of like darts but with the possibility of explosions. Steve Jones wrote: Not that id show up, or ever did, but it

Re: [AFMUG] Spam from Chuck

Not that id show up, or ever did, but it seems the history of animal farm allowed alot of people to get their tip wet in the industry. The industry has changed, fiber is the new canopy. Why dont you guys turn this thing fiber centric? Animal farm 2.0 or 3.14 because only geeks go to stuff like

Re: [AFMUG] Fixing fiberglass ladders

I wouldn’t touch them with a 35 1/2 foot pole. > On Feb 16, 2018, at 21:55, Steve Jones wrote: > > Ive got two broken ladders from tech drops. Can you fix these safely? Both > tipped out the upper guides and popped through the fiberglass. I just hate to > toss 2

Re: [AFMUG] Outdoor PON OLT

Check eBay, alibaba etc. On Feb 15, 2018 11:32 PM, "Jon Langeler" wrote: > Thanks, and yes, it would be grey market since I'm not willing to pay > nearly double for the supported version. Point taken on the Ubiquiti > support though, I just figured crap support is

[AFMUG] FS: Calix 844E-1

eBay: 183071945963 Jon Langeler Michwave Technologies, Inc.

[AFMUG] (no subject)

Re: [AFMUG] epmp 2000 AP real world Wattage.

Thanks Mathew On Thu, Feb 15, 2018 at 5:33 PM, Mathew Howard wrote: > Typically 8-10 watts, from what I've seen. > > On Thu, Feb 15, 2018 at 5:33 PM, Sam Lambie wrote: > >> Hey all, >> >> Has anyone cared to note what the real wattage draw of the AP

Re: [AFMUG] Spam from Chuck

I am not sure we will have large crowds as in the past to justify the fairpark venue. I am thinking that original hotel conference room where we held the first one. I have modified the afmug.com page a bit reflecting that something is going to happen. All but the home page. I cannot find

Re: [AFMUG] How to test your license protection?

While I agree with a lot of what Tim has written, I might add a bit of balance from the point of view of a smaller coordinator: Yes, there are coordinators that use the "shotgun" approach, or as we refer to it, coordination by proxy. They release basic path parameters on a PCN, gather

Re: [AFMUG] How to test your license protection?

These are both informative and insightful emails, and I for one thank you both for sharing. -Adam -- Original Message -- From: "Mike Black" To: af@afmug.com Sent: 2/16/2018 8:48:46 AM Subject: Re: [AFMUG] How to test your license protection? While I agree with

Re: [AFMUG] OT Moviepass dying?

It seems doomed to failure to me, but I still plan on using it until then. On Fri, Feb 16, 2018 at 7:41 AM Robert wrote: > All of moviepass's money generation methods are based upon somebody else > taking less money, no where do they inject more cash into the stream >

Re: [AFMUG] OT Moviepass dying?

All of moviepass's money generation methods are based upon somebody else taking less money, no where do they inject more cash into the stream except for the sole case of food sales. Theaters could end up saying "spend $30 in concession and get a free movie ticket and come out ahead... On

Re: [AFMUG] (no subject)

squirrel On 2/16/18 5:51 AM, Adair Winter wrote:

[AFMUG] OT Moviepass dying?

https://seekingalpha.com/article/4147391-wrong-moviepass-going-zero On the other hand Twitter went for well over a decade without turning a profit.

Re: [AFMUG] Spam from Chuck

sounds similar to a two-day CEO roundtablei likei like - Original Message - From: SmarterBroadband To: af@afmug.com Sent: Friday, February 16, 2018 1:09 PM Subject: Re: [AFMUG] Spam from Chuck I will be there (as long as dates are free)….. Adam

Re: [AFMUG] Spam from Chuck

May or June? From: SmarterBroadband Sent: Friday, February 16, 2018 12:09 PM To: af@afmug.com Subject: Re: [AFMUG] Spam from Chuck I will be there (as long as dates are free)….. Adam From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com Sent: Friday, February 16, 2018 8:01

[AFMUG] Coredial

Just wanted to see what everybody is doing for voip and see if anyone has heard of CoreDial. --

Re: [AFMUG] epmp 2000 AP real world Wattage.

Make sure to check if the ePMP 2000 has a cold start heater like the 1000 does - that tripped us up a couple times. On Fri, Feb 16, 2018 at 10:53 AM, Sam Lambie wrote: > Thanks Mathew > > On Thu, Feb 15, 2018 at 5:33 PM, Mathew Howard > wrote: > >>

Re: [AFMUG] Coredial

Vitelity and Bandwidth.com for DIDs and termination. On 2/16/2018 11:40 AM, Dave wrote: Just wanted to see what everybody is doing for voip and see if anyone has heard of CoreDial. --

Re: [AFMUG] epmp 2000 AP real world Wattage.

2000 definitely has a heater in it for startup if it's too cold. This only powers on during power up if the radio has been offline and is below a certain temperature. It only runs run 2 minutes or less in our experience until a certain internal temp is reached. We see about 16 watts usage with the

Re: [AFMUG] epmp 2000 AP real world Wattage.

Ah, yeah, I forgot to mention that. 16 watts sounds about right... I'd figure 18 to be safe. On Fri, Feb 16, 2018 at 12:06 PM, Darin Steffl wrote: > 2000 definitely has a heater in it for startup if it's too cold. This only > powers on during power up if the radio has

Re: [AFMUG] Spam from Chuck

BBQ.. Dennis Burgess www.linktechs.net – 314-735-0270 x103 – dmburg...@linktechs.net -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Robert Andrews Sent: Friday, February 16, 2018 2:25 PM To: af@afmug.com Subject: Re: [AFMUG] Spam from Chuck With

Re: [AFMUG] Spam from Chuck

Free….. From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com Sent: Friday, February 16, 2018 11:21 AM To: af@afmug.com Subject: Re: [AFMUG] Spam from Chuck May or June? From: SmarterBroadband Sent: Friday, February 16, 2018 12:09 PM To: af@afmug.com

Re: [AFMUG] Spam from Chuck

With smoked dead animals and the chance to play on some construction machinery. From: CBB - Jay Fuller Sent: Friday, February 16, 2018 1:21 PM To: af@afmug.com Subject: Re: [AFMUG] Spam from Chuck sounds similar to a two-day CEO roundtablei likei like - Original Message

Re: [AFMUG] Spam from Chuck

With BBQ On 02/16/2018 12:21 PM, CBB - Jay Fuller wrote: sounds similar to a two-day CEO roundtablei likei like - Original Message - *From:* SmarterBroadband *To:* af@afmug.com *Sent:* Friday, February 16, 2018

Re: [AFMUG] Spam from Chuck

I am thinking of free. Freeish. From: SmarterBroadband Sent: Friday, February 16, 2018 1:26 PM To: af@afmug.com Subject: Re: [AFMUG] Spam from Chuck Free….. From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com Sent: Friday, February 16, 2018 11:21 AM To: af@afmug.com

[AFMUG] Lake level monitoring

I have a customer needing to monitor lake levels need accurate method (gps hopefully) to measure level above msl. Anybody have any suggestions? Roland Houin Fourway.Net

Re: [AFMUG] Spam from Chuck

Sign me up im in for full effect I havent been on a tank since '93 On 02/16/2018 02:24 PM, ch...@wbmfg.com wrote: With smoked dead animals and the chance to play on some construction machinery. *From:* CBB - Jay Fuller *Sent:* Friday, February 16, 2018 1:21 PM *To:* af@afmug.com *Subject:*

Re: [AFMUG] Lake level monitoring

Hmmm. Many of those monitoring stations have a culvert installed vertically to stop wave action. Not sure if they have a float system or what in the culvert. I have used ultrasonic sensors to measure water levels in a water tank before. -Original Message- From: Roland Houin Sent:

Re: [AFMUG] Lake level monitoring

Look into the cambiumnetworks LongReach product for the communication piece. On 02/16/2018 03:51 PM, Roland Houin wrote: I have a customer needing to monitor lake levels need accurate method (gps hopefully) to measure level above msl. Anybody have any suggestions? Roland Houin Fourway.Net

Re: [AFMUG] Lake level monitoring

I was hoping I could just put a syncpipe in a bag & use the gps for elevation. might not last very long or be very accurate. Roland > Hmmm. Many of those monitoring stations have a culvert installed vertically to stop wave action. Not sure if they have a float system or what in the culvert. I

Re: [AFMUG] Lake level monitoring

Unless you use RTK type of GPS receivers, the elevations are pretty low accuracy. Most water managers want at least an inch of precision and accuracy. The Great Salt Lake is measured to hundredths of a foot. -Original Message- From: Roland Houin Sent: Friday, February 16, 2018 3:05 PM

Re: [AFMUG] Spam from Chuck

We’d be interested in that as well. David Coudron From: Af [mailto:af-boun...@afmug.com] On Behalf Of Dave Sent: Friday, February 16, 2018 3:51 PM To: af@afmug.com Subject: Re: [AFMUG] Spam from Chuck Sign me up im in for full effect I havent been on a tank since '93 On 02/16/2018 02:24 PM,

[AFMUG] FS Planet GS-5220-46S2C4X Managed network switch - Used, 1U 48 Port SFP 4 Port SFP+

I've got five (5) relatively new Planet 48 Port SFP 4 port SFP+ switches for $890.00 each if anyone wants them. They need to be in a good temperature-controlled environment though, temp swings make them angry. That's why I swapped them out and have them available. Just email me off list.

Re: [AFMUG] FS Planet GS-5220-46S2C4X Managed network switch - Used, 1U 48 Port SFP 4 Port SFP+

You're not the only one who found that out the hard way... they also don't like extreme voltage variations. On Fri, Feb 16, 2018 at 5:35 PM, Sterling Jacobson wrote: > I've got five (5) relatively new Planet 48 Port SFP 4 port SFP+ switches > for $890.00 each if anyone