Re: [AFMUG] changes to this list
Are you moving the accounts or will we need to subscribe again? -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: ch...@wbmfg.com To: af@afmug.com Sent: Wednesday, June 6, 2018 12:00:10 PM Subject: [AFMUG] changes to this list Once it is up and running, to post will most likely be a...@af.afmug.com They need a sub domain.
[AFMUG] ping...
This is a test of the Emergency Broadcast System. The broadcasters of your area in voluntary cooperation with the FCC... -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107
Re: [AFMUG] Sitemonitor Question with Relay
Generally the tirgger is measured in milliamps. Your load shouldn't be running
through it. But rather through the remote relay.
See the attached image for a quick wiring diagram. I think I drew the diode
backwards, I was in a hurry.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Paul McCall" <pa...@pdmnet.net>
To: af@afmug.com
Sent: Tuesday, April 10, 2018 12:45:48 PM
Subject: Re: [AFMUG] Sitemonitor Question with Relay
But, is the relay switching in the Packetflux bearing any of the load at any
point? I would think not, but the answers are a bit confusing, as though it
is.
I would think most basic relays could be triggered successfully with much less
than 2A
From: Af <af-boun...@afmug.com> On Behalf Of Forrest Christian (List Account)
Sent: Tuesday, April 10, 2018 1:44 PM
To: af <af@afmug.com>
Subject: Re: [AFMUG] Sitemonitor Question with Relay
The relay is rated for 2A@30V, and 60W above that.
See https://www.mouser.com/datasheet/2/315/mech_eng_tx-1075670.pdf figure 1 on
page 3 for a visual of this.
I'd recommend that you test the relay operation with an ohm meter before trying
a circuit. There should be conductivity between C and NC and none between C
and NO when the value is set to zero, and opposite that when it's set to a one.
If it doesn't work, upgrade the firmware to the latest and try again. There
have been a couple of relay bugs fixed in recent memory. Also make sure that
the relay on above and below rows are set to a very high and low number since
if that is enabled it will override the relay.
On Tue, Apr 10, 2018, 11:22 AM Paul McCall
<pa...@pdmnet.net<mailto:pa...@pdmnet.net>> wrote:
Yeah, I thought this would be the case, for some reason, Packetflux support
led my guy to realize that it didn’t work that way.
SMH
From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> On Behalf Of Bill
Prince
Sent: Tuesday, April 10, 2018 12:38 PM
To: Motorola III <af@afmug.com<mailto:af@afmug.com>>
Subject: Re: [AFMUG] Sitemonitor Question with Relay
The typical solution with a light-duty relay is to use it to control a heavier
relay that carries the actual load.
-bp
--
bp
part15sbs{at}gmail{dot}com
On Tue, Apr 10, 2018 at 9:24 AM, Paul McCall
<pa...@pdmnet.net<mailto:pa...@pdmnet.net>> wrote:
Yes, we know that, and have used it on lighter loads. But, apparently there is
a challenge on a heavier load as we described below. Wanting to know if we can
do what we want and maybe we just have the wrong external relay
-Original Message-
From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> On Behalf Of
Christopher Tyler
Sent: Tuesday, April 10, 2018 12:20 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] Sitemonitor Question with Relay
Yes, there is a relay output on the siteMonitor II that you can trigger via
SNMP or web interface.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Paul McCall" <pa...@pdmnet.net<mailto:pa...@pdmnet.net>>
To: af@afmug.com<mailto:af@afmug.com>
Sent: Tuesday, April 10, 2018 11:11:20 AM
Subject: [AFMUG] Sitemonitor Question with Relay
My service manager seems to be struggling with using the Sitemonitor Relay
contact to trigger a 48 Relay that we want to use to power cycle the whole
tower if necessary. So, Packetflux states that the Relay control is maximum.
30v 1amp. So a little more than half the amps at 48v.
So, in the past (lighter loads on towers) we used this to trigger an external
relay and "open" the ground to the main power feed going up the tower. At 48v,
we sometimes are around 2amp on the bigger towers, some perhaps a bit higher
still. (with a 48v relay).
We should be able to use the Sitemonitor to somehow accomplish it.
Can anybody comment on this?
Thanks!
Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800
pa...@pdmnet.net<mailto:pa...@pdmnet.net><mailto:pa...@pdmnet.net<mailto:pa...@pdmnet.net>>
www.pdmnet.com<http://www.pdmnet.com><http://www.pdmnet.com>
www.floridabroadband.com<http://www.floridabroadband.com><http://www.floridabroadband.com>
Re: [AFMUG] Sitemonitor Question with Relay
If you are using an external relay the load shouldn't matter to the SiteMonitor
at all. The load would only matter for the extrenal relay itself. The
SiteMonitor doesn't supply power accross the relay output so you would have to
supply the external relays coil voltage across the site monitor contacts. You
would only have to ensure that your coil volts and amps don't exceed the Site
Monitor rating. And that should work just fine.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Bill Prince" <part15...@gmail.com>
To: "Motorola III" <af@afmug.com>
Sent: Tuesday, April 10, 2018 11:38:29 AM
Subject: Re: [AFMUG] Sitemonitor Question with Relay
The typical solution with a light-duty relay is to use it to control a
heavier relay that carries the actual load.
-bp
--
bp
part15sbs{at}gmail{dot}com
On Tue, Apr 10, 2018 at 9:24 AM, Paul McCall <pa...@pdmnet.net> wrote:
> Yes, we know that, and have used it on lighter loads. But, apparently
> there is a challenge on a heavier load as we described below. Wanting to
> know if we can do what we want and maybe we just have the wrong external
> relay
>
> -Original Message-
> From: Af <af-boun...@afmug.com> On Behalf Of Christopher Tyler
> Sent: Tuesday, April 10, 2018 12:20 PM
> To: af@afmug.com
> Subject: Re: [AFMUG] Sitemonitor Question with Relay
>
> Yes, there is a relay output on the siteMonitor II that you can trigger
> via SNMP or web interface.
>
> --
> Christopher Tyler
> MTCRE/MTCNA/MTCTCE/MTCWE
> Total Highspeed Internet Services
> 417.851.1107
>
> - Original Message -
> From: "Paul McCall" <pa...@pdmnet.net>
> To: af@afmug.com
> Sent: Tuesday, April 10, 2018 11:11:20 AM
> Subject: [AFMUG] Sitemonitor Question with Relay
>
> My service manager seems to be struggling with using the Sitemonitor Relay
> contact to trigger a 48 Relay that we want to use to power cycle the whole
> tower if necessary. So, Packetflux states that the Relay control is
> maximum. 30v 1amp. So a little more than half the amps at 48v.
>
> So, in the past (lighter loads on towers) we used this to trigger an
> external relay and "open" the ground to the main power feed going up the
> tower. At 48v, we sometimes are around 2amp on the bigger towers, some
> perhaps a bit higher still. (with a 48v relay).
>
> We should be able to use the Sitemonitor to somehow accomplish it.
>
> Can anybody comment on this?
>
> Thanks!
>
> Paul McCall, President
> PDMNet, Inc. / Florida Broadband, Inc.
> 658 Old Dixie Highway
> Vero Beach, FL 32962
> 772-564-6800
> pa...@pdmnet.net<mailto:pa...@pdmnet.net>
> www.pdmnet.com<http://www.pdmnet.com>
> www.floridabroadband.com<http://www.floridabroadband.com>
>
>
>
Re: [AFMUG] Sitemonitor Question with Relay
Yes, there is a relay output on the siteMonitor II that you can trigger via SNMP or web interface. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Paul McCall" <pa...@pdmnet.net> To: af@afmug.com Sent: Tuesday, April 10, 2018 11:11:20 AM Subject: [AFMUG] Sitemonitor Question with Relay My service manager seems to be struggling with using the Sitemonitor Relay contact to trigger a 48 Relay that we want to use to power cycle the whole tower if necessary. So, Packetflux states that the Relay control is maximum. 30v 1amp. So a little more than half the amps at 48v. So, in the past (lighter loads on towers) we used this to trigger an external relay and "open" the ground to the main power feed going up the tower. At 48v, we sometimes are around 2amp on the bigger towers, some perhaps a bit higher still. (with a 48v relay). We should be able to use the Sitemonitor to somehow accomplish it. Can anybody comment on this? Thanks! Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 pa...@pdmnet.net<mailto:pa...@pdmnet.net> www.pdmnet.com<http://www.pdmnet.com> www.floridabroadband.com<http://www.floridabroadband.com>
Re: [AFMUG] Require Recent Web Browser?
That's what VM's are for. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Adam Moffett" <dmmoff...@gmail.com> To: af@afmug.com Sent: Friday, March 16, 2018 3:17:54 PM Subject: Re: [AFMUG] Require Recent Web Browser? Personally, I'm less concerned about requiring a recent browser as I am about requiring an antique one. I have a Windows XP VM with IE6 just to manage certain old devices that won't work in a recent browser. If you have some Timelord magic to make an application that will work in the recent browsers 10 years from now, then please do that. -- Original Message -- From: "Forrest Christian (List Account)" <li...@packetflux.com> To: "af" <af@afmug.com> Sent: 3/14/2018 7:49:36 PM Subject: [AFMUG] Require Recent Web Browser? >A bit of a survey here > >A couple of features I'm looking at for current/future products would >be much easier to implement using a certain feature found only in >relatively new web browsers, aka, Chrome/Firefox/Edge updated within >the last year. > >One specific browser feature I'm looking at is webassembly. Various >tools out there indicate that around 87% of the installed/active >browsers on the internet are recent enough for native support. Most >of the browsers gained support for this feature early to mid last year. > With autoupdates being the rule instead of the exception, anyone on a >recent auto-updating web browser should support this. I'm mostly >concerned about 'the rest'. > >Support for the older browsers is possible, but it adds a level of >complexity (specifically a level of testing) which I would prefer not >to do if I could get away without it. > >To be clear: Almost all of the functionality of the upcoming products >won't require these functions. A specific example of something that >might require this is setting up the scripting functionality as I'm >looking at various technologies which would work best if I could run a >chunk of webassembly code in the browser as part of the code editor. >However, other than editing a script, the rest of the functionality >would work fine. > >Thoughts? > >-- >Forrest Christian CEO, PacketFlux Technologies, Inc. >Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >forre...@imach.com | http://www.packetflux.com ><http://www.packetflux.com/> ><http://www.linkedin.com/in/fwchristian> ><http://facebook.com/packetflux> <http://twitter.com/@packetflux> >
Re: [AFMUG] Ubnt - fiber
Sorry, wrong thread. This was supposed to be about the AirCubes :P -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Christopher Tyler" <ch...@totalhighspeed.net> To: af@afmug.com Sent: Thursday, March 8, 2018 10:39:13 AM Subject: Re: [AFMUG] Ubnt - fiber At least on the early units there is no web config enabled when you power them on for the first time. You have to use the phone app or management system to set it up initially. Even after that, web config options are limited/non-existant which might be a good or bad thing, we didn't like it as we prefer to baseline config everything before rolling it out and having to use a phone to connect to every single device gets old quickly. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Steve Jones" <thatoneguyst...@gmail.com> To: af@afmug.com Sent: Thursday, March 8, 2018 10:20:09 AM Subject: Re: [AFMUG] Ubnt - fiber this sounds like a good way to fail On Thu, Mar 8, 2018 at 9:49 AM, <d...@monkeybrains.net> wrote: > SNMP support is also severly lacking. Gotta use UNMS for monitoring ONUs, > which... meh. > > > March 8, 2018 7:13 AM, "Jason McKemie" <j.mcke...@veloxinetbroadband.com > <%22jason%20mckemie%22%20%3cj.mcke...@veloxinetbroadband.com%3E>> wrote: > > Ah, thanks. That is unfortunate. > > On Thursday, March 8, 2018, Cassidy B. Larson <c...@infowest.com> wrote: > > 5. What third-party ONUs can I connect to the UFiber OLT? > The UFiber ONUs are the only supported ONU that is compatible with the > UFiber OLT. Other third-party ONUs will not connect properly to the UFiber > OLT. > https://help.ubnt.com/hc/en-us/articles/36301287-UFiber-GPON-FAQ > > On Mar 8, 2018, at 8:00 AM, Jason McKemie <j.mckemie@veloxinetbroadband. > com> wrote: > But does Ubiquiti's OLT support other manufacturer's ONTs? > > On Thursday, March 8, 2018, Cassidy B. Larson <c...@infowest.com> wrote: > > They announced it two wispapalooza shows ago I think.. started shipping a > year ago or so? > They support a bunch of different OLTs: > https://help.ubnt.com/hc/en-us/articles/115009335068-UFiber- > GPON-Supported-Third-Party-OLTs > > On Mar 8, 2018, at 7:25 AM, CBB - Jay Fuller <par...@cyberbroadband.net> > wrote: > When did they add like an entire product line? Is any of it standards / > complaint / compatible with anything else? > I don't hear anyone talking about this stuff.. > Sent from my smartphone > > > >
Re: [AFMUG] Ubnt - fiber
At least on the early units there is no web config enabled when you power them on for the first time. You have to use the phone app or management system to set it up initially. Even after that, web config options are limited/non-existant which might be a good or bad thing, we didn't like it as we prefer to baseline config everything before rolling it out and having to use a phone to connect to every single device gets old quickly. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Steve Jones" <thatoneguyst...@gmail.com> To: af@afmug.com Sent: Thursday, March 8, 2018 10:20:09 AM Subject: Re: [AFMUG] Ubnt - fiber this sounds like a good way to fail On Thu, Mar 8, 2018 at 9:49 AM, <d...@monkeybrains.net> wrote: > SNMP support is also severly lacking. Gotta use UNMS for monitoring ONUs, > which... meh. > > > March 8, 2018 7:13 AM, "Jason McKemie" <j.mcke...@veloxinetbroadband.com > <%22jason%20mckemie%22%20%3cj.mcke...@veloxinetbroadband.com%3E>> wrote: > > Ah, thanks. That is unfortunate. > > On Thursday, March 8, 2018, Cassidy B. Larson <c...@infowest.com> wrote: > > 5. What third-party ONUs can I connect to the UFiber OLT? > The UFiber ONUs are the only supported ONU that is compatible with the > UFiber OLT. Other third-party ONUs will not connect properly to the UFiber > OLT. > https://help.ubnt.com/hc/en-us/articles/36301287-UFiber-GPON-FAQ > > On Mar 8, 2018, at 8:00 AM, Jason McKemie <j.mckemie@veloxinetbroadband. > com> wrote: > But does Ubiquiti's OLT support other manufacturer's ONTs? > > On Thursday, March 8, 2018, Cassidy B. Larson <c...@infowest.com> wrote: > > They announced it two wispapalooza shows ago I think.. started shipping a > year ago or so? > They support a bunch of different OLTs: > https://help.ubnt.com/hc/en-us/articles/115009335068-UFiber- > GPON-Supported-Third-Party-OLTs > > On Mar 8, 2018, at 7:25 AM, CBB - Jay Fuller <par...@cyberbroadband.net> > wrote: > When did they add like an entire product line? Is any of it standards / > complaint / compatible with anything else? > I don't hear anyone talking about this stuff.. > Sent from my smartphone > > > >
Re: [AFMUG] Tool vest
Or for about half the price a decent fly fishing vest maybe... https://www.basspro.com/shop/en/white-river-fly-shop-270%C2%BA-fly-vest -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Lewis Bergman" <lewis.berg...@gmail.com> To: af@afmug.com Sent: Thursday, February 22, 2018 3:30:32 PM Subject: Re: [AFMUG] Tool vest https://www.duluthtrading.com/store/product/64612.aspx?ev3=recommended_product I don't know jack about the product but I like the commercials. On Thu, Feb 22, 2018 at 2:46 PM Steve Jones <thatoneguyst...@gmail.com> wrote: > Over the years as our techs left i told the boss not to hire, we dont have > enough work, theyre lazy and dont self train, and most importantly i wanted > their wages for moar better radios. Was down to the last tech, he didnt put > his kickers down on the ladder and ate the ground, busted ankle, out for a > while > > Im back to doing my job and the installation gig, like the old days, yum > > This time areound i dont want to tear holes in all my pockets, thats where > i carried the toold a leatherman couldnt take care of. > > Toolbelts never worked because i crawl everywhere i can get amd dropped > tools or got hung up. > > A tool vest would be the bees knees just to keep the common ten tools and > a handful of perishables like cable ends and whatnot. > > Anybody recomend one that will work over winter or summer clothes? > > >
Re: [AFMUG] Pledge drive
Could do something similar to https://www.patreon.com where each individual can choose to contribute or not and also how much they want to contribute to the running of the list. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Dennis Burgess" <dmburg...@linktechs.net> To: af@afmug.com Sent: Monday, February 19, 2018 8:13:04 AM Subject: Re: [AFMUG] Pledge drive It’s the cloud man, no one knows where the cloud is, yet alone how much it costs.! The “cloud” is expensive! I would be happy to host it for free on our ME servers.. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt Hoppes Sent: Sunday, February 18, 2018 12:42 PM To: af@afmug.com Subject: Re: [AFMUG] Pledge drive Can it really be more than $5 How much memory, CPU, and storage can a mailing list take when virtualized? On Feb 18, 2018, at 13:20, Keefe John <keefe...@ethoplex.com<mailto:keefe...@ethoplex.com>> wrote: Just curious, what are the monthly costs to operate this list? On February 18, 2018 11:13:54 AM CST, Chuck McCown <ch...@wbmfg.com<mailto:ch...@wbmfg.com>> wrote: I notice it has been a while since we pushed a bit to help fund the not-insignificant AWS expense that keeps this list alive. Please clean out your couch cushions and paypal the revenue created to pa...@pdmnet.net<mailto:pa...@pdmnet.net> Paul, what is the current status of our deficit? -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
Re: [AFMUG] blocking
The great firewall of Utah? Block everything and only let "approved" sites through. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Jay Weekley" <par...@cyberbroadband.net> To: af@afmug.com Sent: Tuesday, February 6, 2018 10:18:49 AM Subject: Re: [AFMUG] blocking So, you can't use a 3rd party solution? Where is the logic in that? I used to help administer a schools Sonic Wall and had to occasionally white list sites that had been blocked so kids could do research on breast cancer etc. It wasn't bad for a small school but having to do that for each of your hundreds/thousands of customers individually would be a major pain. ch...@wbmfg.com wrote: > The proposed solution is that any ISP over 500 customers has to > provide some kind of blocking technology to prevent harm to minors. > And it cannot be a 3rd party solution. > I want to come up with an exhaustive list of all the potential ways > minors can select harmful things on the internet. There is more than > just web pages out there. > *From:* Zach Underwood > *Sent:* Tuesday, February 6, 2018 9:01 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] blocking > Are you talking about > https://www.eff.org/deeplinks/2017/04/states-introduce-dubious-legislation-ransom-internet > > this style of blocking? > If you are talking about that style of blocking then as ISP we fight > this as it is not the ISP job to block. > If someone wants to block this type of content when the parent should > be in change of installing blocking software and picking what should > be blocked. > On Tue, Feb 6, 2018 at 10:48 AM, <ch...@wbmfg.com> wrote: > > I have some proposed legislation I am facing about porn blocking > again. But they are not defining the type of service. It is one > thing to block web traffic, but how about netflix or twitter or > skype or.. > I want to play defense here and force the lawmakers to define > exactly what we need to block. > So can you guys help me develop a list of all the things we would > have to analyze and block if we were going to attempt to create a > true device that protects kids. > > > > -- > Zach Underwood (RHCE,RHCSA,RHCT,UACA) > My website <http://zachunderwood.me> > advance-networking.com <http://advance-networking.com> > > <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient> > > Virus-free. www.avg.com > <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient> > > > > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
Re: [AFMUG] OT Digital signage
Using a RaspberryPi http://www.binaryemotions.com/digital-signage/raspberry-digital-signage/ -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Jason McKemie" <j.mcke...@veloxinetbroadband.com> To: af@afmug.com Sent: Friday, January 5, 2018 10:58:59 AM Subject: Re: [AFMUG] OT Digital signage I've done a couple of these for a local company, pretty simple to set up - you could certainly get some consulting income from it, I'm not sure about recurring revenue though. Especially given that the companies that sell the signs offer the wireless as well. On Friday, January 5, 2018, Jay Weekley <par...@cyberbroadband.net> wrote: > I've seeing a lot more digital signage lately and some of it appears to be > pushed through the internet based on the external wireless adapter I see > attached to the back of the TV. Does anyone have any experience with this > or provide this as a side service? >
Re: [AFMUG] Sealed or flooded batteries for DC backup?
On a side note, most AGM batteries are also DOT approved (at least the Northstar brand is), so you can "legally" carry them in your vehicle without worrying about hazmat. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: ch...@wbmfg.com To: af@afmug.com Sent: Friday, January 5, 2018 10:16:31 AM Subject: Re: [AFMUG] Sealed or flooded batteries for DC backup? AGM are great, unless you are cheap... From: Jeremy Sent: Friday, January 5, 2018 9:07 AM To: af@afmug.com Subject: Re: [AFMUG] Sealed or flooded batteries for DC backup? Gave up flooded years ago. Had a few sites where the APC exploded the batteries. Even when that didn't happen, I got tired of the yearly battery check and fill at all the sites. When I started my own company I switched to AGM and never looked back. They are amazing. Also, we don't use APCs anymore except at a couple of large sites where we use the 3000XL, which has a much better charging system. On Fri, Jan 5, 2018 at 6:38 AM, David M <dmilho...@wletc.com> wrote: there is always an evaporation issue with flooded.. They have to be maintained on a regular schedule in order to have extended life beyond 5 yrs AGM/GEL expensive but reliable with little maintenance. Give em a good home and little venting and get 7 to 10 with those. On 1/4/2018 3:47 PM, Robert Andrews wrote: Sounds like a problem with the Charge controller being incorrectly set. If this is on-grid, I would lower the voltage the charge controller is maintaining and make sure it is set to NOT do any equalize cycles. Then flooded should be better. Of course if the environment is causing evaporation that is a different problem. I didn't find telecom batteries were worth the expense. So if I dumped wet, I would probably go with sealed Marine.. Best, Robert On 01/04/2018 01:38 PM, TJ Trout wrote: I have been really liking flooded batteries over the last 10 years or so because I am able to service the battery and extend the life but I am finding that on sites that I forget to add distilled water at least twice a year sometimes the batteries dry out due to the charge controller over gassing the batteries. Right now I'm trying to decide between Walmart deep Cycles, rack mount telecom batteries or just sealed RV Marine deep cycle batteries. What is the best bang-for-the-buck currently considering the life span and capacity ? Thanks TJ
Re: [AFMUG] Telco Batts - WTB
https://www.northstarbattery.com/ -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Gino A. Villarini" <g...@aeronetpr.com> To: af@afmug.com Sent: Thursday, November 2, 2017 11:38:21 AM Subject: [AFMUG] Telco Batts - WTB Looking for telco (thin, front terminals) type AGM batts 150-180ah, my source is dried-up! Gino A. Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png]
Re: [AFMUG] Link Utilization Monitoring
+1 -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "David Coudron" <david.coud...@advantenon.com> To: af@afmug.com Sent: Monday, October 9, 2017 12:51:08 PM Subject: Re: [AFMUG] Link Utilization Monitoring Hi Adair, We would be interested in hearing more about this. We have much to learn about Powercode, but as of yet, we aren’t able to do what Christopher is asking about below. We can SNMP pull the MAC for Rx and Tx and we can get the traffic Rx and Tx throughput on the radio. However, because the MAC changes all the time due to small changes in signal strength etc, or if there is new interference that shows up, we never have a consistent MAC number to work with. That coupled with an ever changing amount of traffic being sent through the radio means that we would need a real time calc to take traffic divided by MAC Tx and Rx to figure out how much of the currently available MAC is being used by the amount of traffic going through the radio (near realtime utilization of the link). Powercode can get the individual data points, but we have not found a way to do the calculation and present that in its own graph. We’d love to be able to do this right in Powercode though. Is that what you are doing with Grafana? If you have done this in Powercode and would be willing to share, we’d owe you more than a couple of beers Thanks, David Coudron david.coud...@advantenon.com<mailto:david.coud...@advantenon.com> | Mobile: 612-991-7474 Advantenon, Inc. [cid:image001.png@01CEE562.60FF8FC0] <http://www.linkedin.com/company/Advantenon> [cid:image002.png@01CEE562.60FF8FC0] <http://www.twitter.com/Advantenon> [cid:image003.png@01CEE562.60FF8FC0] <http://www.facebook.com/Advantenon> [cid:image004.png@01CEE562.60FF8FC0] <http://blog.advantenon.com/> i...@advantenon.com<mailto:i...@advantenon.com> | 3500 Vicksburg Lane N, Suite 315, Plymouth, MN 55447 | www.advantenon.com<http://www.advantenon.com/> | Phone: 800-704-4720 | Local: 612-454-1545 [cid:image005.jpg@01D340FD.3FAB2280] From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adair Winter Sent: Monday, October 9, 2017 10:49 AM To: af@afmug.com Subject: Re: [AFMUG] Link Utilization Monitoring It's really not that hard. On Oct 9, 2017 8:33 AM, "Steve Jones" <thatoneguyst...@gmail.com<mailto:thatoneguyst...@gmail.com>> wrote: powercode "does" this with snmp, but requires too much work to get the right graphs and alerts set up On Mon, Oct 9, 2017 at 10:18 AM, Adair Winter <ada...@amarillowireless.net<mailto:ada...@amarillowireless.net>> wrote: The do this with grafana, it's pulling link capacity and looks at throughput, if it gets with in 90% we get an alert in slack On Oct 9, 2017 7:12 AM, "Christopher Tyler" <ch...@totalhighspeed.net<mailto:ch...@totalhighspeed.net>> wrote: So, what are people using to monitor their backhaul links? Specifically, how do you get notified when a link is getting close to saturation? Does your solution take RF link quality into account or is it blind to the actual, real-world link capabilities? Looking for something that is fire and forget. I think that initial data entry and updates will quickly become untenable if the responsibility for determining the link speed is left to a manual process. For example, if I have to run a link test to determine the link speed for every link, then that is going to be a nightmare just for the initial data entry alone. If I have to do that even once a week, it becomes a non-starter. By the time I was finished doing them all, I'd immediately have to start over to keep the links even close to being accurate. That would require a full-time employee just to handle that single task. I don't care if it's open or closed source, free or paid. I just need something that works. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107
Re: [AFMUG] Tracking tracking numbers
Most of the generic (non carrier) apps do all of the services, not just their own. ie, UPS only tracks UPS, same with FedEx. Parcel and the like will track everyone that they can, even Chinese and other foreign posts. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Josh Reynolds" <j...@kyneticwifi.com> To: af@afmug.com Sent: Monday, October 9, 2017 9:24:02 AM Subject: Re: [AFMUG] Tracking tracking numbers Ups has a thing for that. I bet FedEx has too. On Oct 6, 2017 3:26 PM, "Josh Luthman" <j...@imaginenetworksllc.com> wrote: > Does anyone have a webapp/Chrome extension/something that I can throw > tracking numbers in and keep a log of? Ideally it would show a list of > them that are yet to arrive, possibly ones with issues, and then a long > term history of them. > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373=gmail=g> > Suite 1337 > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373=gmail=g> > Troy, OH 45373 > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373=gmail=g> >
Re: [AFMUG] Tracking tracking numbers
web.parcelapp.net fits my needs, I'm sure there are others that are even beter. I just chose parcel because it turned up in my search on my Phone and it has an iPhone and a Mac desktop app as well as a website. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Josh Luthman" <j...@imaginenetworksllc.com> To: af@afmug.com Sent: Friday, October 6, 2017 3:26:07 PM Subject: [AFMUG] Tracking tracking numbers Does anyone have a webapp/Chrome extension/something that I can throw tracking numbers in and keep a log of? Ideally it would show a list of them that are yet to arrive, possibly ones with issues, and then a long term history of them. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
[AFMUG] Link Utilization Monitoring
So, what are people using to monitor their backhaul links? Specifically, how do you get notified when a link is getting close to saturation? Does your solution take RF link quality into account or is it blind to the actual, real-world link capabilities? Looking for something that is fire and forget. I think that initial data entry and updates will quickly become untenable if the responsibility for determining the link speed is left to a manual process. For example, if I have to run a link test to determine the link speed for every link, then that is going to be a nightmare just for the initial data entry alone. If I have to do that even once a week, it becomes a non-starter. By the time I was finished doing them all, I'd immediately have to start over to keep the links even close to being accurate. That would require a full-time employee just to handle that single task. I don't care if it's open or closed source, free or paid. I just need something that works. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107
Re: [AFMUG] Wanna throw up in your mouth?
Not to mention the PR nightmare if anyone found out they were doing that. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Mathew Howard" <mhoward...@gmail.com> To: "af" <af@afmug.com> Sent: Friday, September 29, 2017 10:22:38 AM Subject: Re: [AFMUG] Wanna throw up in your mouth? Well, if that's what they want to do... all I can say is, good luck with that! I realize AT the only option in a lot of areas, but anywhere that they have any real competition (whether that be cable, local fiber providers or even WISPs), I can't see how that wouldn't cost them a lot of business. On Fri, Sep 29, 2017 at 8:22 AM, Dennis Burgess <dmburg...@linktechs.net> wrote: > Of course they want to slow “rivals content” they own DirectTV J lol. No > more dish, cbs all access or Netflix on ATT circuits J > > > > > > *Dennis Burgess** –** Network Solution Engineer – Consultant * > > MikroTik Certified Trainer/Consultant > <http://www.linktechs.net/productcart/pc/viewcontent.asp?idpage=5> – > MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE > > > > For Wireless Hardware/Routers visit www.linktechs.net > > Radio Frequency Coverages: www.towercoverage.com > > Office: 314-735-0270 <(314)%20735-0270> > > E-Mail: dmburg...@linktechs.net > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Reynolds > *Sent:* Friday, September 29, 2017 7:37 AM > > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Wanna throw up in your mouth? > > > > Oh look... > > > > AT Inc. and other broadband providers asked the U.S. Supreme Court to > overturn the Obama-era "net neutrality" rule barring internet service > providers from slowing or blocking rivals’ content. > > The appeals, filed Thursday, will put new pressure on a rule enacted in > 2015 when the Federal Communications Commission was under Democratic > control. Filing a separate appeal from AT were the United States Telecom > Association, a trade group, and broadband service provider CenturyLink Inc. > > --- > > Ignoring the bias in the reporting (Bloomberg), it's interesting that the > challenge is coming from Telecom. I wonder how much pressure they actually > feel from regional fiber companies and WISPs since they(telco) no longer > have as much of a protected status as they used to. Landline has largely > gone the way of the dino, the ROW was opened, discussions of rural > broadband experiments and funds for non-telco have been brought up, and the > FCC has increasingly had contact from WISPA. > > > > On Sep 28, 2017 9:43 PM, "Mike Hammett" <af...@ics-il.net> wrote: > > Which is a point I've already made. > > If you can get access without any particular designation, but by just > asking, great. > If above fails, get your CLEC and do it again, only now they have to let > you in unless there's a documented reason why not (not enough room, etc.). > Don't depend on BIAS which is rather volatile. > > > > - > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > > > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > -- > > *From: *ch...@wbmfg.com > *To: *af@afmug.com > *Sent: *Thursday, September 28, 2017 1:22:48 PM > > > *Subject: *Re: [AFMUG] Wanna throw up in your mouth? > > If they don’t know BIAS is not really in play then once you get the permit > you are golden. > > Cell phone providers are not CLECs and they get in all the same ROWs as > the CLECS and ILECS. > > > > I have never ever had a permitting agency ask me how I had the right to > ask for access. > > > > Moreover, crossing federal public lands, they cannot even charge you > rent. That is by act of congress. And that applies to every person on > this list. > > > > They just want drawings and money. > > > > *From:* Mike Hammett > > *Sent:* Thursday, September 28, 2017 12:16 PM > > *To:* af@afmug.com > > *Subject:* Re: [AFMUG] Wanna throw up in your mouth? > > > > Which is a point
Re: [AFMUG] powercode bmu specs
Don't know about any documentation but we will be testing out the Mikrotik "BMU" as soon as we can. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Steve Jones" <thatoneguyst...@gmail.com> To: af@afmug.com Sent: Tuesday, September 26, 2017 11:00:05 AM Subject: Re: [AFMUG] powercode bmu specs is there any documentation now anywhere? I cant find anything outside change logs and videos. On Tue, Sep 26, 2017 at 9:40 AM, Steve Jones <thatoneguyst...@gmail.com> wrote: > yeah, mikrotik used to be an option when imagestream was an option > > On Tue, Sep 26, 2017 at 9:20 AM, Josh Luthman <j...@imaginenetworksllc.com > > wrote: > >> Back? No. Never had Mikrotik. In ancient times it was CentOS, then >> ImageStream, then their own. >> >> You'll still need a BMU of sorts for SNMP, monitoring, etc but the duties >> of queues/routes/redirect/packet pushing are the bigger demands. >> >> >> Josh Luthman >> Office: 937-552-2340 <(937)%20552-2340> >> Direct: 937-552-2343 <(937)%20552-2343> >> 1100 Wayne St >> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373=gmail=g> >> Suite 1337 >> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373=gmail=g> >> Troy, OH 45373 >> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373=gmail=g> >> >> On Tue, Sep 26, 2017 at 10:14 AM, Steve Jones <thatoneguyst...@gmail.com> >> wrote: >> >>> theyre going back to mikrotiks? >>> >>> On Tue, Sep 26, 2017 at 9:08 AM, Josh Luthman < >>> j...@imaginenetworksllc.com> wrote: >>> >>>> Mikrotik integrated is starting, I'd wait until that's done and avoid >>>> buying an official "BMU". >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 <(937)%20552-2340> >>>> Direct: 937-552-2343 <(937)%20552-2343> >>>> 1100 Wayne St >>>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373=gmail=g> >>>> Suite 1337 >>>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373=gmail=g> >>>> Troy, OH 45373 >>>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373=gmail=g> >>>> >>>> On Mon, Sep 25, 2017 at 10:22 PM, Steve Jones < >>>> thatoneguyst...@gmail.com> wrote: >>>> >>>>> I'm pushing our infrastructure over to the lighter used NX216 so at >>>>> least the monitoring offloads. but I have to say, it really pisses a guy >>>>> off when hardware specs are removed, really pisses the guy off. >>>>> >>>>> weve been running 750 or so through this one, but bandwidth has >>>>> increased. As best I can tell its not heavy, like 20kpps if I'm >>>>> understanding the attacked MT correctly. >>>>> >>>>> This started with monitoring anomalies, high pings on monitoring >>>>> devices on the BMU, but no customer impact, now its croaking customer >>>>> latencies. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On Mon, Sep 25, 2017 at 9:15 PM, Adair Winter < >>>>> ada...@amarillowireless.net> wrote: >>>>> >>>>>> I think we started having issues around 600 or 800 subs on our NX216 >>>>>> >>>>>> >>>>>> On Mon, Sep 25, 2017 at 9:14 PM, CBB - Jay Fuller < >>>>>> par...@cyberbroadband.net> wrote: >>>>>> >>>>>>> >>>>>>> i have heard rumor you might have problems with a nx216 with 500 or >>>>>>> so accounts or higher. >>>>>>> the symptom is when you see "bmu queue" counter start being high(er) >>>>>>> on your billing server. >>>>>>> we have not run into this yet and are still on a nx216 - close to >>>>>>> 700 customers i think. >>>>>>> >>>>>>> we have been adding and removing a lot (of customers) lately >>>>>>> >>>>>>> >>>>>>> >>>>>>> - Original Message - >>>>>>> *From:* Steve Jones <thatoneguyst...@gmail.com> >>>>>>> *To:* af@afmug.com >>>>>>> *Sent:* Monday, September 25, 2017 8:47 PM >>>>>>> *Subject:* [AFMUG] powercode bmu specs >>>>>>> >>>>>>> anybody know where the hardware details are? I think we outgrew a >>>>>>> bmu, but with the whole new nonsense website and haphazard tertiary >>>>>>> sites I >>>>>>> don't seem to be able to find any specs >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> Adair Winter >>>>>> VP, Network Operations / Co-Owner >>>>>> Amarillo Wireless | 806.316.5071 <(806)%20316-5071> >>>>>> C: 806.231.7180 <(806)%20231-7180> >>>>>> http://www.amarillowireless.net >>>>>> <http://www.amarillowireless.net> >>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >> >
Re: [AFMUG] OT trolling
They actually made up new pronouns for some of the gender identities. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Chuck McCown" <ch...@wbmfg.com> To: af@afmug.com Sent: Thursday, February 23, 2017 3:00:09 PM Subject: Re: [AFMUG] OT trolling Perhaps "Whatever" could be the universal pronoun. -Original Message- From: Chuck McCown Sent: Thursday, February 23, 2017 1:58 PM To: af@afmug.com Subject: Re: [AFMUG] OT trolling How many pronouns are there? I, you, he, she, it, we, they, me, him, her, us, them, what, who, whom, mine, yours, his, hers, ours, theirs, this, that, these, those, which, whose, whoever, whatever, whichever, whomever, myself, yourself, himself, herself, itself, ourselves, themselves, each other, one another, anything, everybody, another, each, few, many, none, some, all, any, anybody, anyone, everyone, everything, no one, nobody, nothing, none, other, others, several, somebody, someone, something, most, enough, little, more, both, either, neither, one, much, such. Please refer to me as Mr. Whichever. From: Jason McKemie Sent: Thursday, February 23, 2017 1:49 PM To: af@afmug.com Subject: Re: [AFMUG] OT trolling Where it gets really crazy is when they start passing laws that you legally have to refer to someone by a pronoun of their choosing. They have something like this in Canada right now. On Thu, Feb 23, 2017 at 2:42 PM, Chuck McCown <ch...@wbmfg.com> wrote: I know it will be tried. We drilled a hole from the boy’s shower to the girls’ shower. First chance I got to look through the hole all I saw was Penni Depriest’s eye looking in on me. Then they put a bolt through the hole I felt like I was part of the Porky’s movie. I have no clue how to attempt to help someone that is trans with this problem and not cause much more troubles for others. Force the schools to build third facilities with a question mark over the doors? I wonder how the military does it in the barracks? And if there was bathroom police checking birth certificates, does that really matter as it may say one thing on the certificate but they recently decided to identify as something else. Isn’t there one “identity” that is “fluid” or some such thing? From: Ken Hohhof Sent: Thursday, February 23, 2017 1:33 PM To: af@afmug.com Subject: Re: [AFMUG] OT trolling Once you know someone who is transgender, it turns out not to be like that at all. There are exceptions to everything, but if the first thing that comes to your mind is identifying as a girl to shower with the girls, then probably you don’t have any friends or relatives that are transgender. Well, that is unlikely, more likely you just don’t know they are trans. And school kids unfortunately take the brunt of this. Anywhere else, are there really going to be bathroom police checking birth certificates? There’s a creepy thought. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Thursday, February 23, 2017 1:52 PM To: af@afmug.com Subject: [AFMUG] OT trolling Bored. If this was mid 1970s and if I discovered that the president said I could shower with the girls at school it I “identified as a girl”, I sure as hell would have identified as a girl I have not heard a single commentator address this issue. Boys will be boys. What do the lgbtqrstuv folks have as an answer to this situation? They don’t seem to be interested in protecting the rights of my granddaughter to not have the boy’s football team in there after volleyball practice.
Re: [AFMUG] Flying COWs
Sorry, must have glazed over on that part. So, tethered to the ground and no on-board batteries. That makes more sense. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Zach Underwood" <zunder1...@gmail.com> To: af@afmug.com Sent: Thursday, February 23, 2017 2:00:25 PM Subject: Re: [AFMUG] Flying COWs Yes it does take about flight time "The tether between the drone and the ground provides a highly secure data connection via fiber and supplies power to the Flying COW, which allows for unlimited flight time." On Thu, Feb 23, 2017 at 2:55 PM, Chuck McCown <ch...@wbmfg.com> wrote: > Did the dish run away with the spoon? > > > On Feb 23, 2017 10:27 AM, "Dan Petermann" <d...@wyoming.com> wrote: > > http://wirelessestimator.com/articles/2017/industrys-first- >> successful-flying-cow-live-test-is-made-by-att/ >> > -- Zach Underwood (RHCE,RHCSA,RHCT,UACA) My website <http://zachunderwood.me> advance-networking.com
Re: [AFMUG] Flying COWs
The article didn't mention flight time and it looks kinda heavy. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Jaime Solorza" <losguyswirel...@gmail.com> To: "Animal Farm" <af@afmug.com> Sent: Thursday, February 23, 2017 12:11:05 PM Subject: Re: [AFMUG] Flying COWs I will take two please! On Feb 23, 2017 10:27 AM, "Dan Petermann" <d...@wyoming.com> wrote: > http://wirelessestimator.com/articles/2017/industrys-first- > successful-flying-cow-live-test-is-made-by-att/
Re: [AFMUG] OT Home Office Cleanup
You can play it online for free.. https://archive.org/details/msdos_The_Bards_Tale_1_-_Tales_Of_The_Unknown_1987 -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Paul Stewart" <p...@paulstewart.org> To: af@afmug.com Sent: Monday, February 20, 2017 7:00:52 AM Subject: Re: [AFMUG] OT Home Office Cleanup Ah cool .. I remember playing Bard’s Tale - loved that game. There was a Remote Access BBS door game adopted after it as well … now I’m dating myself haha > On Feb 19, 2017, at 11:14 PM, Rex-List Account <xorex63l...@gmail.com> wrote: > > Brings back memories of late nights and pizza. > I have done all the Ultima series, Zork, Bard's Tale, Dungeon Master, and > many others. > Good old days. Boy I miss them. > > -Original Message- > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sterling Jacobson > Sent: Sunday, February 19, 2017 5:15 PM > To: af@afmug.com > Subject: Re: [AFMUG] OT Home Office Cleanup > > Well, I played the Ultima Games as they were released, so that gives away my > age. > > Grew up on Apple II+ and Ultima and Wizardry. > > -Original Message- > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adam Moffett > Sent: Sunday, February 19, 2017 9:36 AM > To: af@afmug.com > Subject: Re: [AFMUG] OT Home Office Cleanup > > I like your vintage games display. > > Ultima...holy crap. That was already old when I was a kid. > > > -- Original Message -- > From: "Sterling Jacobson" <sterl...@avative.net> > To: "af@afmug.com" <af@afmug.com> > Sent: 2/18/2017 11:55:55 PM > Subject: Re: [AFMUG] OT Home Office Cleanup > >> I guess the jpeg was too large... >> >> -Original Message- >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sterling Jacobson >> Sent: Saturday, February 18, 2017 9:36 PM >> To: 'af@afmug.com' <af@afmug.com> >> Subject: [AFMUG] OT Home Office Cleanup >> >> Tidied up my home office and played a little Overwatch this evening. > > > - > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2016.0.7998 / Virus Database: 4756/13965 - Release Date: 02/17/17 >
Re: [AFMUG] [OT: Politics] Can we?
What's the astrological sign for a**hole?
(written in good humor of course)
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: ch...@wbmfg.com
To: af@afmug.com
Sent: Monday, January 23, 2017 12:47:13 PM
Subject: Re: [AFMUG] [OT: Politics] Can we?
It has to look like a hot chick, that’s all I’m sayin’ about that
From: Bill Prince
Sent: Monday, January 23, 2017 11:35 AM
To: af@afmug.com
Subject: Re: [AFMUG] [OT: Politics] Can we?
I've also heard tell that Geminis are bisexual.
bp
<part15sbs{at}gmail{dot}com>
On 1/23/2017 10:30 AM, Faisal Imtiaz wrote:
From Wikipedia...
I think it is fairly accurate !
:)
---
Astrologers believe Geminis have a volatile temperament, that their strength
however is their versatility, and that their versatility allows them to learn a
little about everything and develop skills in many areas. Geminis are
considered to hold mysteriously unique artistic and creative abilities unlike
other signs. Often considered to be very intelligent individuals, they have a
wide appreciation for the arts, philosophy, history and the natural sciences.
They do not like boring people or routine procedures and therefore struggle to
deal with authoritative figures. They are enlightened to talk about any subject
which they find interesting and where they can stimulate their naturally
intellectual personalities. Geminis are noted to be drastic and hasty yet very
responsible and disciplined. They are considered to be the most misunderstood
of all signs due to their dual personality expressed by the twins of their
sign. Because of this, don't be surprised to often find Geminis in different
moods and therefore mood swings can occur often for Geminis because of their
high degree of mental processing and thinking. This makes them quite
philosophical people. Geminis are sensitive as well but use their high
intelligence to counter anything that upsets them
==
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net
--
From: ch...@wbmfg.com
To: af@afmug.com
Sent: Monday, January 23, 2017 1:18:16 PM
Subject: Re: [AFMUG] [OT: Politics] Can we?
Well June 21
Perhaps
From: Faisal Imtiaz
Sent: Monday, January 23, 2017 10:47 AM
To: af@afmug.com
Subject: Re: [AFMUG] [OT: Politics] Can we?
>Sometimes when I am trolling, I touch a nerve. I can switch to either
side of an argument at will for fun.
Are you a Gemini by any chance ?
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net
From: ch...@wbmfg.com
To: af@afmug.com
Sent: Monday, January 23, 2017 12:14:54 PM
Subject: Re: [AFMUG] [OT: Politics] Can we?
I don’t think anyone has ever been knocked off the list. Shouted down at
times. Insulted. But never knocked off.
Sometimes when I am trolling, I touch a nerve. I can switch to either
side of an argument at will for fun.
With the exception of being a Clinton supporter. Just cannot make myself
go there.
From: That One Guy /sarcasm
Sent: Sunday, January 22, 2017 7:47 PM
To: af@afmug.com
Subject: Re: [AFMUG] [OT: Politics] Can we?
just fyi if jaime gets knocked off the list, im taking my toys and going
home
in 4 years hes going to be showing us pictures of tecate and some
insanely tasty looking crow anyway :-)
On Sun, Jan 22, 2017 at 4:57 PM, Jaime Solorza
<losguyswirel...@gmail.com> wrote:
I don't buy that... Respect your opinion but I don't buy that 63
list...
I have no confidence in Trump... I think he is bad for our country...
I will not change my mind. If you want to knock me off list... It's cool... I
have always remained true to my beliefs. My last post on this one...
On Jan 22, 2017 3:50 PM, "Josh Reynolds" <j...@kyneticwifi.com> wrote:
Have you ever looked at the list of people killed who were involved
in some way with the JFK assassination?
On Jan 22, 2017 4:34 PM, "Chuck McCown" <ch...@wbmfg.com> wrote:
One thing is for certain, absolute inarguable fact, these 63 people
are as dead as you can get and all of them either spilled the beans on the
Clintons or had information that could harm the Clintons.
So, if you want to talk ethics and morals of Trump, I have not yet
heard of a
Re: [AFMUG] RB3011
I 3D print a basic frame that we can wall or DIN rail mount with. If you are interested in the STL file, I can send it to you. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Kurt Fankhauser" <lists.wavel...@gmail.com> To: af@afmug.com Sent: Monday, January 9, 2017 10:46:52 AM Subject: Re: [AFMUG] RB3011 using 3011's here as well, and they fit nicely into a 2011 case which I have to do a lot since my enclosures aren't big enough for rackmount On Mon, Jan 9, 2017 at 8:59 AM, George Skorup <geo...@cbcast.com> wrote: > I just want enough horsepower to do routing at medium sized sites. > > > On 1/9/2017 7:53 AM, Mike Hammett wrote: > > The closest I can think of to that would be IgniteNet's PoE switch. It's > missing a few of your checkboxes, but would be the closest. > > > > - > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > > > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > -- > *From: *"George Skorup" <geo...@cbcast.com> <geo...@cbcast.com> > *To: *af@afmug.com > *Sent: *Monday, January 9, 2017 7:52:18 AM > *Subject: *Re: [AFMUG] RB3011 > > I want a CRS based on the 3011 that has 4x SFP/SFP+ cages and 16-20 copper > gigabit ports in a desktop case with rack ears optional and 10-60VDC. But I > know it won't happen because MikroTik doesn't listen. > > On 1/8/2017 7:04 PM, Ken Hohhof wrote: > > Works as advertised, once I upgraded firmware. It was really hosed with > the shipping firmware but they’ve probably fixed that by now. > > > > > > *From:* Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] *On > Behalf Of *Jason McKemie > *Sent:* Sunday, January 8, 2017 6:57 PM > *To:* af@afmug.com > *Subject:* [AFMUG] RB3011 > > > > Anyone using these? Good, bad, ugly? > > > > Also, I'm looking to power one from a 48v Eltek setup, any recommendations > on a DC/DC converter? > > > > >
Re: [AFMUG] OT Office Lighting Change to LED
They make both kinds of LED lights. Direct drop in replacements and those which
run directly off of AC power which have to have the ballast removed.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Bill Prince" <part15...@gmail.com>
To: af@afmug.com
Sent: Tuesday, November 15, 2016 6:31:56 PM
Subject: Re: [AFMUG] OT Office Lighting Change to LED
I will also relate what we did in our kitchen. Our kitchen had two recessed
fluorescent lights that consumed about 160 watts total. We replaced those with
9 recessed LED lights that consume 60 watts total. So we save about 100 watts
if we run them at 100% power; which we rarely do. The LED lights are on a
dimmer, and we typically run them at 10-50% of full power. using this as a
factor, I would say we're actually using something closer to 30 watts on a
continuous basis. So we are actually using ~~ 130 watts less power. We run
these lights maybe 5-8 hours per day, so it add up. We are also in the "triple
penalty box" with regard to our power consumption, so the incremental power
costs us close to 30 cents a kilowatt hour. In the final analysis, the lights
save
bp
<part15sbs{at}gmail{dot}com>
On 10/11/2016 10:30 AM, Sterling Jacobson wrote:
Anyone ever replaced their standard fluorescence ceiling lights with LEDs?
I haven't researched it much yet, but someone told me you can't just use a drop
in long bulb replacement.
You have to change out the center piece, forgot what that's called.
Is that correct?
Is this something I can do myself? Or do I need to hire a company?
My system has about 24 bays with three bulbs each drawing about 1500W when they
are all working.
Do I save much by going LED on these? What's ROI?
Re: [AFMUG] Small PC for remote Troubleshooting
If all you want is something to connect to remotely and don't need an actual Windows desktop, you could use a Raspberry Pi Zero with a USB Ethernet adapter attached for the whopping sum of about $40. Of course you would need -some- linux know how as well unless someone was willing to write up a basic interface or test suite for easy consumption. Makes for a very inexpensive tap. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Sean Heskett" <af...@zirkel.us> To: af@afmug.com Sent: Tuesday, September 27, 2016 4:19:38 PM Subject: Re: [AFMUG] Small PC for remote Troubleshooting this was mentioned on slashdot last week: https://www.solid-run.com/product/solidpc-q4-carrier/#configuration -sean On Sat, Sep 24, 2016 at 3:22 PM, Gino Villarini <ginovi...@gmail.com> wrote: > What you guys suggest for a remote displayless PC that we can use at > remote sites for troubleshooting/remote access via 4g? > > Case is that sometimes its quicker for our engineers to have remote access > to equipment via a remote desktop session than going step by step with our > field techs or tower crews. > > we just need browser, winbox, terminal > > lan port should be able to have vlan configured >
Re: [AFMUG] Drilling into roof
Only if you wrench them down. And they seem to have clamps for just about any type of metal roof you can imagine on their website. http://www.s-5.com/clamps/index_1048.cfm -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Chuck McCown" <ch...@wbmfg.com> To: af@afmug.com Sent: Wednesday, September 14, 2016 11:53:56 AM Subject: Re: [AFMUG] Drilling into roof Do those clamps smash the seam flat? -Original Message- From: Christopher Tyler Sent: Wednesday, September 14, 2016 10:38 AM To: af@afmug.com Subject: Re: [AFMUG] Drilling into roof For example... -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Christopher Tyler" <ch...@totalhighspeed.net> To: af@afmug.com Sent: Wednesday, September 14, 2016 11:36:08 AM Subject: Re: [AFMUG] Drilling into roof They make clamps for metal roofs, so you don't have to drill into them, non-penetrating. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Ken Hohhof" <af...@kwisp.com> To: af@afmug.com Sent: Wednesday, September 14, 2016 11:24:51 AM Subject: Re: [AFMUG] Drilling into roof Yeah, but you live in an area with those red tile roofs, right? We are starting to get metal roofs on houses, and I'm the same way, I won't lag into those. Plus they reflect RF. -Original Message- From: Gilbert T. Gutierrez, Jr. Sent: Wednesday, September 14, 2016 11:11 AM To: af@afmug.com Subject: Re: [AFMUG] Drilling into roof We will not drill into a roof. If a roof penetration is necessary, we have the customer's roofer make it so that we do not own it. Gilbert Phoenix Internet On 9/14/2016 8:18 AM, TJ Trout wrote: > > These days mounting a tripod on someone's roof makes me real nervous even > though I've done hundreds before. Does anyone have a no roof drilling > policy? Or am I just being too careful? >
Re: [AFMUG] Drilling into roof
http://www.s-5.com/clamps/index_1048.cfm -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Eric Kuhnke" <eric.kuh...@gmail.com> To: af@afmug.com Sent: Wednesday, September 14, 2016 11:39:02 AM Subject: Re: [AFMUG] Drilling into roof You mean like this? http://www.contractortalk.com/attachments/f11/91390d1367515172-bracing-satellite-dish-standing-seam-metal-roof-1.jpg On Wed, Sep 14, 2016 at 9:36 AM, Christopher Tyler <ch...@totalhighspeed.net > wrote: > They make clamps for metal roofs, so you don't have to drill into them, > non-penetrating. > > -- > Christopher Tyler > MTCRE/MTCNA/MTCTCE/MTCWE > Total Highspeed Internet Services > 417.851.1107 > > - Original Message - > From: "Ken Hohhof" <af...@kwisp.com> > To: af@afmug.com > Sent: Wednesday, September 14, 2016 11:24:51 AM > Subject: Re: [AFMUG] Drilling into roof > > Yeah, but you live in an area with those red tile roofs, right? > > We are starting to get metal roofs on houses, and I'm the same way, I won't > lag into those. Plus they reflect RF. > > > -Original Message- > From: Gilbert T. Gutierrez, Jr. > Sent: Wednesday, September 14, 2016 11:11 AM > To: af@afmug.com > Subject: Re: [AFMUG] Drilling into roof > > We will not drill into a roof. If a roof penetration is necessary, we > have the customer's roofer make it so that we do not own it. > > Gilbert > > Phoenix Internet > > > On 9/14/2016 8:18 AM, TJ Trout wrote: > > > > These days mounting a tripod on someone's roof makes me real nervous even > > though I've done hundreds before. Does anyone have a no roof drilling > > policy? Or am I just being too careful? > > > > >
Re: [AFMUG] Drilling into roof
They make clamps for metal roofs, so you don't have to drill into them, non-penetrating. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Ken Hohhof" <af...@kwisp.com> To: af@afmug.com Sent: Wednesday, September 14, 2016 11:24:51 AM Subject: Re: [AFMUG] Drilling into roof Yeah, but you live in an area with those red tile roofs, right? We are starting to get metal roofs on houses, and I'm the same way, I won't lag into those. Plus they reflect RF. -Original Message- From: Gilbert T. Gutierrez, Jr. Sent: Wednesday, September 14, 2016 11:11 AM To: af@afmug.com Subject: Re: [AFMUG] Drilling into roof We will not drill into a roof. If a roof penetration is necessary, we have the customer's roofer make it so that we do not own it. Gilbert Phoenix Internet On 9/14/2016 8:18 AM, TJ Trout wrote: > > These days mounting a tripod on someone's roof makes me real nervous even > though I've done hundreds before. Does anyone have a no roof drilling > policy? Or am I just being too careful? >
Re: [AFMUG] Canopy PMP SMNP Help
You can use WHISP-BOX-MIBV2-MIB::boxDeviceType.0 450 will have MIMO and OFDM in the return text... WHISP-BOX-MIBV2-MIB::boxDeviceType.0 = STRING: 2.4GHz MIMO OFDM - Multipoint - Access Point FSK will not have either... WHISP-BOX-MIBV2-MIB::boxDeviceType.0 = STRING: 5.7GHz - Multipoint - Subscriber Module -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Sean Heskett" <af...@zirkel.us> To: af@afmug.com Sent: Thursday, September 8, 2016 11:09:17 AM Subject: Re: [AFMUG] Canopy PMP SMNP Help you can tell the type and frequency by MAC address. i don't have the complete secret decoder ring available at the moment but here's a couple I know from quickly looking at our APs and SMs: 0A003E2X = FSK 2.4 0A003E9X = FSK 900 0A003EDX = FSK 5.7 0A003EFX = FSK 5.7 0A003E3X = 430 0A003E4X = 450 3.65 0A003EAX = 450 5ghz 0A003EBX = 450 5ghz If you just dig around your network you'll see the MACs line up with type and freq. as for the license speed there is probably an ODI that reveals that but you'll need to dig around the MIB file. Hope that helps! -Sean On Thu, Sep 8, 2016 at 9:05 AM, Matt <matt.mailingli...@gmail.com> wrote: > I am trying to go through my SM list and update settings as they have > evolved. > > Is there an easy way with SNMP to tell if an SM is a FSK or 450 unit? > > How about if its in 2.4, 3.6 or 5.x bands? > > Also, how to tell if its licensed at 10, 20 or etc. mbps? This is the > main one. The above two I can tell 'usually' by IP pool. >
Re: [AFMUG] call back when you fix your g and 9 keys
.true -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "James Howard" <ja...@litewire.net> To: af@afmug.com Sent: Wednesday, September 7, 2016 5:03:58 PM Subject: Re: [AFMUG] call back when you fix your g and 9 keys Usually if a customer is running Linux they don't call with problems like this one had though From: Af [mailto:af-boun...@afmug.com] On Behalf Of Christopher Tyler Sent: Wednesday, September 07, 2016 5:02 PM To: af@afmug.com Subject: Re: [AFMUG] call back when you fix your g and 9 keys It does work in Gnome. I was pressing CTRL+ALT not CTRL+SHIFT. (facepalm) -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Christopher Tyler" <ch...@totalhighspeed.net><mailto:ch...@totalhighspeed.net%3e> To: af@afmug.com<mailto:af@afmug.com> Sent: Wednesday, September 7, 2016 4:59:55 PM Subject: Re: [AFMUG] call back when you fix your g and 9 keys That doesn't generally work on Linux, not sure about MAC but I doubt it. Supposedly, if you are using Gnome you can do it by holding down both the Ctrl and Shift keys and typing u followed by the hexadecimal value of the character. I can't get it to work so maybe no longer supported in Gnome? -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Cameron Crum" <cc...@wispmon.com><mailto:cc...@wispmon.com%3e> To: af@afmug.com<mailto:af@afmug.com> Sent: Wednesday, September 7, 2016 4:07:34 PM Subject: Re: [AFMUG] call back when you fix your g and 9 keys I know everyone just tried it. On Wed, Sep 7, 2016 at 4:07 PM, Jay Weekley <par...@cyberbroadband.net><mailto:par...@cyberbroadband.net%3e> wrote: > Wow, that works! > > > Mark - Myakka Technologies wrote: > >> Ken, >> >> Showing my age here >> >> Hold alt key down and on numkeypad 103 for g and 057 for 9. >> >> > Total Control Panel Login<https://asp.reflexion.net/login?domain=litewire.net> To: ja...@litewire.net<https://asp.reflexion.net/address-properties?aID=242260993=litewire.net> From: 0100015706ac4507-9593832b-6f6d-47d9-8d99-9271227bb338-000...@amazonses.com<mailto:0100015706ac4507-9593832b-6f6d-47d9-8d99-9271227bb338-000...@amazonses.com> Remove<https://asp.reflexion.net/FooterAction?ver=3=1=16976192150=litewire.net> amazonses.com from my allow list You received this message because the domain amazonses.com is on your allow list.
Re: [AFMUG] call back when you fix your g and 9 keys
It does work in Gnome. I was pressing CTRL+ALT not CTRL+SHIFT. (facepalm) -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Christopher Tyler" <ch...@totalhighspeed.net> To: af@afmug.com Sent: Wednesday, September 7, 2016 4:59:55 PM Subject: Re: [AFMUG] call back when you fix your g and 9 keys That doesn't generally work on Linux, not sure about MAC but I doubt it. Supposedly, if you are using Gnome you can do it by holding down both the Ctrl and Shift keys and typing u followed by the hexadecimal value of the character. I can't get it to work so maybe no longer supported in Gnome? -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Cameron Crum" <cc...@wispmon.com> To: af@afmug.com Sent: Wednesday, September 7, 2016 4:07:34 PM Subject: Re: [AFMUG] call back when you fix your g and 9 keys I know everyone just tried it. On Wed, Sep 7, 2016 at 4:07 PM, Jay Weekley <par...@cyberbroadband.net> wrote: > Wow, that works! > > > Mark - Myakka Technologies wrote: > >> Ken, >> >> Showing my age here >> >> Hold alt key down and on numkeypad 103 for g and 057 for 9. >> >> >
Re: [AFMUG] call back when you fix your g and 9 keys
That doesn't generally work on Linux, not sure about MAC but I doubt it. Supposedly, if you are using Gnome you can do it by holding down both the Ctrl and Shift keys and typing u followed by the hexadecimal value of the character. I can't get it to work so maybe no longer supported in Gnome? -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Cameron Crum" <cc...@wispmon.com> To: af@afmug.com Sent: Wednesday, September 7, 2016 4:07:34 PM Subject: Re: [AFMUG] call back when you fix your g and 9 keys I know everyone just tried it. On Wed, Sep 7, 2016 at 4:07 PM, Jay Weekley <par...@cyberbroadband.net> wrote: > Wow, that works! > > > Mark - Myakka Technologies wrote: > >> Ken, >> >> Showing my age here >> >> Hold alt key down and on numkeypad 103 for g and 057 for 9. >> >> >
Re: [AFMUG] TowerCoverage and Liquor
Not going to WISPAPALOOZA but I'll send cash for that drink. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Sam Morris" <w...@csilogan.com> To: af@afmug.com Sent: Tuesday, August 30, 2016 2:50:59 PM Subject: [AFMUG] TowerCoverage and Liquor Anyone with me on buying Jim a drink at WISPAPALOOZA if he will move Towercoverage off Windslows and onto Linux?
Re: [AFMUG] cnMaestro
Cool, thanks for the info. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Josh Luthman" <j...@imaginenetworksllc.com> To: af@afmug.com Sent: Friday, August 26, 2016 12:39:17 PM Subject: Re: [AFMUG] cnMaestro Probably have to go to the forum for any assistance, that's where I'd go for this. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Aug 26, 2016 at 1:31 PM, Christopher Tyler <ch...@totalhighspeed.net > wrote: > The ePMP was previously onboarded but showing down for some reason, it's > now showing as up. It only took about 20 minutes for it's status to change > for some reason. > The routers won't onboard at all, just shows as being "Queued" and have > been in that state for the last 20 minutes. > > -- > Christopher Tyler > MTCRE/MTCNA/MTCTCE/MTCWE > Total Highspeed Internet Services > 417.851.1107 > > - Original Message - > From: "Josh Luthman" <j...@imaginenetworksllc.com> > To: af@afmug.com > Sent: Friday, August 26, 2016 12:22:16 PM > Subject: Re: [AFMUG] cnMaestro > > I haven't got any 3.0 units on cnMaestro, did you confirm that's working > with others? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Aug 26, 2016 at 1:20 PM, Christopher Tyler < > ch...@totalhighspeed.net > > wrote: > > > Everything running latest. > > > > -- > > Christopher Tyler > > MTCRE/MTCNA/MTCTCE/MTCWE > > Total Highspeed Internet Services > > 417.851.1107 > > > > - Original Message - > > From: "Josh Luthman" <j...@imaginenetworksllc.com> > > To: af@afmug.com > > Sent: Friday, August 26, 2016 12:17:02 PM > > Subject: Re: [AFMUG] cnMaestro > > > > Running minimum versions? > > > > > > Josh Luthman > > Office: 937-552-2340 > > Direct: 937-552-2343 > > 1100 Wayne St > > Suite 1337 > > Troy, OH 45373 > > > > On Fri, Aug 26, 2016 at 1:14 PM, Christopher Tyler < > > ch...@totalhighspeed.net > > > wrote: > > > > > Anyone else having issues this morning onboarding devices to cnMaestro? > > > I have a couple of routers and an ePMP radio that all show down even > > > though they are all up and accessible. > > > Just want to know if it's me or if I should be calling Cambium to tell > > > them to fix their server. > > > > > > -- > > > Christopher Tyler > > > MTCRE/MTCNA/MTCTCE/MTCWE > > > Total Highspeed Internet Services > > > 417.851.1107 > > > > > > > > >
Re: [AFMUG] cnMaestro
The ePMP was previously onboarded but showing down for some reason, it's now showing as up. It only took about 20 minutes for it's status to change for some reason. The routers won't onboard at all, just shows as being "Queued" and have been in that state for the last 20 minutes. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Josh Luthman" <j...@imaginenetworksllc.com> To: af@afmug.com Sent: Friday, August 26, 2016 12:22:16 PM Subject: Re: [AFMUG] cnMaestro I haven't got any 3.0 units on cnMaestro, did you confirm that's working with others? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Aug 26, 2016 at 1:20 PM, Christopher Tyler <ch...@totalhighspeed.net > wrote: > Everything running latest. > > -- > Christopher Tyler > MTCRE/MTCNA/MTCTCE/MTCWE > Total Highspeed Internet Services > 417.851.1107 > > - Original Message - > From: "Josh Luthman" <j...@imaginenetworksllc.com> > To: af@afmug.com > Sent: Friday, August 26, 2016 12:17:02 PM > Subject: Re: [AFMUG] cnMaestro > > Running minimum versions? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Aug 26, 2016 at 1:14 PM, Christopher Tyler < > ch...@totalhighspeed.net > > wrote: > > > Anyone else having issues this morning onboarding devices to cnMaestro? > > I have a couple of routers and an ePMP radio that all show down even > > though they are all up and accessible. > > Just want to know if it's me or if I should be calling Cambium to tell > > them to fix their server. > > > > -- > > Christopher Tyler > > MTCRE/MTCNA/MTCTCE/MTCWE > > Total Highspeed Internet Services > > 417.851.1107 > > > > >
Re: [AFMUG] cnMaestro
Everything running latest. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Josh Luthman" <j...@imaginenetworksllc.com> To: af@afmug.com Sent: Friday, August 26, 2016 12:17:02 PM Subject: Re: [AFMUG] cnMaestro Running minimum versions? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Aug 26, 2016 at 1:14 PM, Christopher Tyler <ch...@totalhighspeed.net > wrote: > Anyone else having issues this morning onboarding devices to cnMaestro? > I have a couple of routers and an ePMP radio that all show down even > though they are all up and accessible. > Just want to know if it's me or if I should be calling Cambium to tell > them to fix their server. > > -- > Christopher Tyler > MTCRE/MTCNA/MTCTCE/MTCWE > Total Highspeed Internet Services > 417.851.1107 > >
[AFMUG] cnMaestro
Anyone else having issues this morning onboarding devices to cnMaestro? I have a couple of routers and an ePMP radio that all show down even though they are all up and accessible. Just want to know if it's me or if I should be calling Cambium to tell them to fix their server. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107
Re: [AFMUG] anyone using trillian IM?
We are using slack.com now. Works pretty well. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "That One Guy /sarcasm" <thatoneguyst...@gmail.com> To: af@afmug.com Sent: Wednesday, August 24, 2016 3:23:58 PM Subject: Re: [AFMUG] anyone using trillian IM? openfire is jabber/xmpp, just easy for a guy who doesnt give a shit about doing any work on an IM server besides installing it from a script and occasionally pushing an update. A non battery drain on mobile is a big deal, and dumb user file transfer has been a godsend On Wed, Aug 24, 2016 at 3:18 PM, George Skorup <geo...@cbcast.com> wrote: > Everybody has a company Android on our Apps domain, so we just use > Hangouts. > > On 8/24/2016 3:14 PM, That One Guy /sarcasm wrote: > > We run an openfire server and have always used the spak im client for > interoffice communication between TS, CS and and administration > the problem is we never knew who was where and it required a different > username on each device, workstation, mobile, laptop, etc without > configuring a boot on the openfire server, just a pita to remember to login > logout everytime you changed locations if you wanted uniformity, and > histories only logged on the server, so if i popped on my laptop on the > same account as my workstation it wouldnt have the workstation history. > > trillian solves this as you connect to the trillian server and it connects > to your inhouse im server (or yahoo aol or facebook, etc) from multiple > devices at the same time > > They have a free client with their server with ads or whatever, a paid > client with some features, and an in house server with perpetual licensing > and optional renewal > > It seems to meet the need, however, im my previous interweb miscreient > days it was trillian and ICQ i used to deliver sub7 packages to my > unsuspecting victims, ie, it was a toy software. It seems to have grown, > but is it still a toy software? > > -- > If you only see yourself as part of the team but you don't see your team > as part of yourself you have already failed as part of the team. > > > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
Re: [AFMUG] OT: just WTF
And it was the state supreme court not the US Supreme court that ruled. So only applied to Connecticut anyway. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Ken Hohhof" <af...@kwisp.com> To: af@afmug.com Sent: Friday, August 19, 2016 4:39:23 PM Subject: Re: [AFMUG] OT: just WTF I’m not sure that’s a correct reading of the article. This was a state job, I’m guessing with a union contract that included arbitration? The arbitrator said he should not be fired but rather be suspended without pay for 6 months and be subject to random drug testing for a year. The lower court overturned the arbitrator’s decision saying it was contrary to state policy against marijuana use. The supreme court overruled the lower court and let the arbitrator’s ruling stand. “All seven justices agreed that the lower-court judge was wrong to overturn the arbitrator’s ruling, saying that although state policy on drug use in the workplace allows for firing workers it does not require it.” It sounds like they were in the clear firing the worker if it weren’t for his ability to take it to arbitration. From: That One Guy /sarcasm Sent: Friday, August 19, 2016 4:24 PM To: af@afmug.com Subject: Re: [AFMUG] OT: just WTF probably cheaper to push the dope fiend off a tower and let the insurance pay out the death benefit On Fri, Aug 19, 2016 at 4:20 PM, Jaime Solorza <losguyswirel...@gmail.com> wrote: Yep. You have provide medical and rehab assistance sometimes... On Aug 19, 2016 3:17 PM, "That One Guy /sarcasm" <thatoneguyst...@gmail.com> wrote: https://www.washingtonpost.com/business/economy/court-rules-for-connecticut-state-worker-fired-for-smoking-pot/2016/08/19/d4122b74-6630-11e6-be4e-23fc4d4d12b4_story.html The supreme court has now ruled that you cant actually fire an employee for doing drugs in your company vehicles and getting arrested for the crime -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team. -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
Re: [AFMUG] PMP450i 900mhz and Netonix
Sorry got a bit confused with the 450/450i discussion.Josh is correct, the 450
AP is reversed the 450i AP is not.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Christopher Tyler" <ch...@totalhighspeed.net>
To: af@afmug.com
Sent: Tuesday, August 16, 2016 1:11:11 PM
Subject: Re: [AFMUG] PMP450i 900mhz and Netonix
No, the 450i AP uses normal PoE. The SM/CPE requires a pin swap.
"Access point is now 802.3at compatible and includes an AUX port, while the
Subscriber can re-use the 30 VDC power supplies common to the PMP 100 platform"
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Josh Luthman" <j...@imaginenetworksllc.com>
To: af@afmug.com
Sent: Tuesday, August 16, 2016 1:05:36 PM
Subject: Re: [AFMUG] PMP450i 900mhz and Netonix
450, not 450i
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Aug 16, 2016 at 2:01 PM, Christopher Tyler <ch...@totalhighspeed.net
> wrote:
> The 450i AP's use standard PoE. It's not reversed.
>
> --
> Christopher Tyler
> MTCRE/MTCNA/MTCTCE/MTCWE
> Total Highspeed Internet Services
> 417.851.1107
>
> - Original Message -
> From: "Josh Luthman" <j...@imaginenetworksllc.com>
> To: af@afmug.com
> Sent: Tuesday, August 16, 2016 1:00:48 PM
> Subject: Re: [AFMUG] PMP450i 900mhz and Netonix
>
> Change the pinout I believe.
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Tue, Aug 16, 2016 at 1:59 PM, Kurt Fankhauser <lists.wavel...@gmail.com
> >
> wrote:
>
> > how do you do gigabit with the 24v polarity needing reversed?
> >
> > On Tue, Aug 16, 2016 at 1:57 PM, Josh Luthman <
> j...@imaginenetworksllc.com
> > > wrote:
> >
> >> 24v and 48v but Netonix does both
> >>
> >>
> >> Josh Luthman
> >> Office: 937-552-2340
> >> Direct: 937-552-2343
> >> 1100 Wayne St
> >> Suite 1337
> >> Troy, OH 45373
> >>
> >> On Tue, Aug 16, 2016 at 1:48 PM, Kurt Fankhauser <
> >> lists.wavel...@gmail.com> wrote:
> >>
> >>> pmp450 and pmp450i have different poe voltages
> >>>
> >>> On Tue, Aug 16, 2016 at 1:31 PM, Craig House <cr...@totalhighspeed.net
> >
> >>> wrote:
> >>>
> >>>> It will work we're using it in many places
> >>>>
> >>>> Sent from my iPhone
> >>>>
> >>>> On Aug 16, 2016, at 12:30, Bill Prince <part15...@gmail.com> wrote:
> >>>>
> >>>> It will probably power it, but it won't provide sync.
> >>>>
> >>>>
> >>>> bp
> >>>> <part15sbs{at}gmail{dot}com>
> >>>>
> >>>>
> >>>> On 8/16/2016 10:18 AM, Darin Steffl wrote:
> >>>>
> >>>> Hello all,
> >>>>
> >>>> Will a Netonix 48V switch power the PMP450i 900mhz?
> >>>>
> >>>> I'm leaning towards that it will NOT due to needing 48-56V and 802.3at
> >>>> PoE which I don't think Netonix supports.
> >>>>
> >>>> Can anyone confirm my thoughts or tell me I'm wrong and it will work?
> >>>>
> >>>> Thanks
> >>>>
> >>>> --
> >>>> Darin Steffl
> >>>> Minnesota WiFi
> >>>> www.mnwifi.com
> >>>> 507-634-WiFi
> >>>> <http://www.facebook.com/minnesotawifi> Like us on Facebook
> >>>> <http://www.facebook.com/minnesotawifi>
> >>>>
> >>>>
> >>>>
> >>>
> >>
> >
>
Re: [AFMUG] PMP450i 900mhz and Netonix
No, the 450i AP uses normal PoE. The SM/CPE requires a pin swap.
"Access point is now 802.3at compatible and includes an AUX port, while the
Subscriber can re-use the 30 VDC power supplies common to the PMP 100 platform"
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Josh Luthman" <j...@imaginenetworksllc.com>
To: af@afmug.com
Sent: Tuesday, August 16, 2016 1:05:36 PM
Subject: Re: [AFMUG] PMP450i 900mhz and Netonix
450, not 450i
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Aug 16, 2016 at 2:01 PM, Christopher Tyler <ch...@totalhighspeed.net
> wrote:
> The 450i AP's use standard PoE. It's not reversed.
>
> --
> Christopher Tyler
> MTCRE/MTCNA/MTCTCE/MTCWE
> Total Highspeed Internet Services
> 417.851.1107
>
> - Original Message -
> From: "Josh Luthman" <j...@imaginenetworksllc.com>
> To: af@afmug.com
> Sent: Tuesday, August 16, 2016 1:00:48 PM
> Subject: Re: [AFMUG] PMP450i 900mhz and Netonix
>
> Change the pinout I believe.
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Tue, Aug 16, 2016 at 1:59 PM, Kurt Fankhauser <lists.wavel...@gmail.com
> >
> wrote:
>
> > how do you do gigabit with the 24v polarity needing reversed?
> >
> > On Tue, Aug 16, 2016 at 1:57 PM, Josh Luthman <
> j...@imaginenetworksllc.com
> > > wrote:
> >
> >> 24v and 48v but Netonix does both
> >>
> >>
> >> Josh Luthman
> >> Office: 937-552-2340
> >> Direct: 937-552-2343
> >> 1100 Wayne St
> >> Suite 1337
> >> Troy, OH 45373
> >>
> >> On Tue, Aug 16, 2016 at 1:48 PM, Kurt Fankhauser <
> >> lists.wavel...@gmail.com> wrote:
> >>
> >>> pmp450 and pmp450i have different poe voltages
> >>>
> >>> On Tue, Aug 16, 2016 at 1:31 PM, Craig House <cr...@totalhighspeed.net
> >
> >>> wrote:
> >>>
> >>>> It will work we're using it in many places
> >>>>
> >>>> Sent from my iPhone
> >>>>
> >>>> On Aug 16, 2016, at 12:30, Bill Prince <part15...@gmail.com> wrote:
> >>>>
> >>>> It will probably power it, but it won't provide sync.
> >>>>
> >>>>
> >>>> bp
> >>>> <part15sbs{at}gmail{dot}com>
> >>>>
> >>>>
> >>>> On 8/16/2016 10:18 AM, Darin Steffl wrote:
> >>>>
> >>>> Hello all,
> >>>>
> >>>> Will a Netonix 48V switch power the PMP450i 900mhz?
> >>>>
> >>>> I'm leaning towards that it will NOT due to needing 48-56V and 802.3at
> >>>> PoE which I don't think Netonix supports.
> >>>>
> >>>> Can anyone confirm my thoughts or tell me I'm wrong and it will work?
> >>>>
> >>>> Thanks
> >>>>
> >>>> --
> >>>> Darin Steffl
> >>>> Minnesota WiFi
> >>>> www.mnwifi.com
> >>>> 507-634-WiFi
> >>>> <http://www.facebook.com/minnesotawifi> Like us on Facebook
> >>>> <http://www.facebook.com/minnesotawifi>
> >>>>
> >>>>
> >>>>
> >>>
> >>
> >
>
Re: [AFMUG] PMP450i 900mhz and Netonix
The SM's are still reversed and use the 30c Cambium power supply, but the AP's
are not.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Christopher Tyler" <ch...@totalhighspeed.net>
To: af@afmug.com
Sent: Tuesday, August 16, 2016 1:01:55 PM
Subject: Re: [AFMUG] PMP450i 900mhz and Netonix
The 450i AP's use standard PoE. It's not reversed.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Josh Luthman" <j...@imaginenetworksllc.com>
To: af@afmug.com
Sent: Tuesday, August 16, 2016 1:00:48 PM
Subject: Re: [AFMUG] PMP450i 900mhz and Netonix
Change the pinout I believe.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Aug 16, 2016 at 1:59 PM, Kurt Fankhauser <lists.wavel...@gmail.com>
wrote:
> how do you do gigabit with the 24v polarity needing reversed?
>
> On Tue, Aug 16, 2016 at 1:57 PM, Josh Luthman <j...@imaginenetworksllc.com
> > wrote:
>
>> 24v and 48v but Netonix does both
>>
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> On Tue, Aug 16, 2016 at 1:48 PM, Kurt Fankhauser <
>> lists.wavel...@gmail.com> wrote:
>>
>>> pmp450 and pmp450i have different poe voltages
>>>
>>> On Tue, Aug 16, 2016 at 1:31 PM, Craig House <cr...@totalhighspeed.net>
>>> wrote:
>>>
>>>> It will work we're using it in many places
>>>>
>>>> Sent from my iPhone
>>>>
>>>> On Aug 16, 2016, at 12:30, Bill Prince <part15...@gmail.com> wrote:
>>>>
>>>> It will probably power it, but it won't provide sync.
>>>>
>>>>
>>>> bp
>>>> <part15sbs{at}gmail{dot}com>
>>>>
>>>>
>>>> On 8/16/2016 10:18 AM, Darin Steffl wrote:
>>>>
>>>> Hello all,
>>>>
>>>> Will a Netonix 48V switch power the PMP450i 900mhz?
>>>>
>>>> I'm leaning towards that it will NOT due to needing 48-56V and 802.3at
>>>> PoE which I don't think Netonix supports.
>>>>
>>>> Can anyone confirm my thoughts or tell me I'm wrong and it will work?
>>>>
>>>> Thanks
>>>>
>>>> --
>>>> Darin Steffl
>>>> Minnesota WiFi
>>>> www.mnwifi.com
>>>> 507-634-WiFi
>>>> <http://www.facebook.com/minnesotawifi> Like us on Facebook
>>>> <http://www.facebook.com/minnesotawifi>
>>>>
>>>>
>>>>
>>>
>>
>
Re: [AFMUG] PMP450i 900mhz and Netonix
The 450i AP's use standard PoE. It's not reversed.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Josh Luthman" <j...@imaginenetworksllc.com>
To: af@afmug.com
Sent: Tuesday, August 16, 2016 1:00:48 PM
Subject: Re: [AFMUG] PMP450i 900mhz and Netonix
Change the pinout I believe.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Aug 16, 2016 at 1:59 PM, Kurt Fankhauser <lists.wavel...@gmail.com>
wrote:
> how do you do gigabit with the 24v polarity needing reversed?
>
> On Tue, Aug 16, 2016 at 1:57 PM, Josh Luthman <j...@imaginenetworksllc.com
> > wrote:
>
>> 24v and 48v but Netonix does both
>>
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> On Tue, Aug 16, 2016 at 1:48 PM, Kurt Fankhauser <
>> lists.wavel...@gmail.com> wrote:
>>
>>> pmp450 and pmp450i have different poe voltages
>>>
>>> On Tue, Aug 16, 2016 at 1:31 PM, Craig House <cr...@totalhighspeed.net>
>>> wrote:
>>>
>>>> It will work we're using it in many places
>>>>
>>>> Sent from my iPhone
>>>>
>>>> On Aug 16, 2016, at 12:30, Bill Prince <part15...@gmail.com> wrote:
>>>>
>>>> It will probably power it, but it won't provide sync.
>>>>
>>>>
>>>> bp
>>>> <part15sbs{at}gmail{dot}com>
>>>>
>>>>
>>>> On 8/16/2016 10:18 AM, Darin Steffl wrote:
>>>>
>>>> Hello all,
>>>>
>>>> Will a Netonix 48V switch power the PMP450i 900mhz?
>>>>
>>>> I'm leaning towards that it will NOT due to needing 48-56V and 802.3at
>>>> PoE which I don't think Netonix supports.
>>>>
>>>> Can anyone confirm my thoughts or tell me I'm wrong and it will work?
>>>>
>>>> Thanks
>>>>
>>>> --
>>>> Darin Steffl
>>>> Minnesota WiFi
>>>> www.mnwifi.com
>>>> 507-634-WiFi
>>>> <http://www.facebook.com/minnesotawifi> Like us on Facebook
>>>> <http://www.facebook.com/minnesotawifi>
>>>>
>>>>
>>>>
>>>
>>
>
Re: [AFMUG] OT New project
This one can do two cans at at time, but maybe similar issues with dimmensions, etc. http://cansporter.com/ -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "James Howard" <ja...@litewire.net> To: af@afmug.com Sent: Wednesday, June 8, 2016 11:34:07 AM Subject: Re: [AFMUG] OT New project My brother is telling me I should sell my Bobcat and get a Toolcat 5600. Probably will at some point but they’re pretty pricey, even used. http://www.bobcat.com/utility-products/toolcat/models/5600/features From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Wednesday, June 08, 2016 11:23 AM To: af@afmug.com Subject: Re: [AFMUG] OT New project If I can figure out a way to hook up to a UTV/ATV I will. I have never owned one and don’t know if they are heavy enough to do the job and if there are any common mountings or attach points. From: James Howard<mailto:ja...@litewire.net> Sent: Wednesday, June 08, 2016 10:05 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] OT New project Yeah, I get the 3point part. I was thinking of a mount similar to what you have that you just slide the bucket into. Didn’t realize that though about the cans not all having pockets. We’ve had bins from several different companies and they all had the pockets. I actually want a way to do it with a UTV instead of loader tractor. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Wednesday, June 08, 2016 10:54 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] OT New project Two problems: 1)Not all tractors have a three point hitch. 2)The can designs are not standardized. I was surprised at the different number and sizes of can designs. When I started the project I was looking at doing it simple like this, but when I found out there is not a pocket on all cans etc and the sizes and geometries vary I did it the way the garbage trucks do it. From: James Howard<mailto:ja...@litewire.net> Sent: Wednesday, June 08, 2016 9:49 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] OT New project I hate to say this but I think you’re making it a lot more complicated than it might need to be Chuck. Have you seen this one? https://www.youtube.com/watch?v=yoeP-3BRnx8 Your design has the advantage of not having to get off and turn the bin around if it’s facing the wrong way but this sure is simple. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Wednesday, June 08, 2016 10:06 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] OT New project That is kinda what I am hoping. It will be 100% hot dip galvanized. Just scoop it on and away you go, nothing to connect or hookup. Not sure yet whether or not to offer multiple powering options such as: * On board battery with removable battery and charger in the house. * On board batter with built in 120 VAC charger and short AC cord and plug. * Connect to the 12 VDC system of the tractor (lower cost option). I was going to control it via tilt switch. Tilt it a bit down and it opens, up and it closes. But I think I will go with the RF remote. Tilts might be tricky when going up and down slopes. You don’t want to go down hill and have it dump your garbage. I could do a remote switch and tractor power for the super economy version... -Original Message- From: Robert Andrews Sent: Wednesday, June 08, 2016 9:01 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] OT New project I know a lot of people that would love that! On 06/08/2016 07:50 AM, Lewis Bergman wrote: > So what demand is this to satisfy? I assume that the black cylinder is > some kind of solenoid used to lock the attachment on the bucket. How do > you dump it? Is this just to move the trash receptacles out to the road > so they can be emptied? If o, I can see a use for it. I see some people > on five acre tracts struggling to move their cans out all the time. > > On Wed, Jun 8, 2016 at 9:38 AM Chuck McCown <ch...@wbmfg.com > <mailto:ch...@wbmfg.com>> wrote: > > Try this: > > > https://youtu.be/vWyV9I2XD_M > Total Control Panel Login<https://asp.reflexion.net/login?domain=litewire.net> To: ja...@litewire.net<https://asp.reflexion.net/address-properties?aID=242260993=litewire.net> From: 01000155308cb1b2-41df8703-a4b2-4af6-ab14-1c51ce87f796-000...@amazonses.com<mailto:01000155308cb1b2-41df8703-a4b2-4af6-ab14-1c51ce87f796-000...@amazonses.com> Remove<https://asp.reflexion.net/FooterAction?ver=3=1=15279838149=litewire.net> amazonses.com from my allow list You received this message because the domain amazonses.com is on your allow list. Total Control Panel Login<https://asp.reflex
[AFMUG] Monster 6502 at Makerfaire
Video of the Monster 6502 in action. https://www.youtube.com/watch?v=73h4cjTeX44 -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107
Re: [AFMUG] Blistering world record WIFI transmission heralds new era in super-fast internet
And the writer didn't know (or care) the difference between bits per second and GB of data. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Chuck McCown" <ch...@wbmfg.com> To: af@afmug.com Sent: Wednesday, May 25, 2016 11:34:06 AM Subject: Re: [AFMUG] Blistering world record WIFI transmission heralds new era in super-fast internet And sheets of paper and drapery and a well placed sneeze... -Original Message- From: Steve Sent: Wednesday, May 25, 2016 10:28 AM To: af@afmug.com Subject: Re: [AFMUG] Blistering world record WIFI transmission heralds new era in super-fast internet I'm thinking water and clouds are going to be a problem.. :) - Original Message - From: "Josh Luthman" <j...@imaginenetworksllc.com> To: af@afmug.com Sent: Wednesday, May 25, 2016 12:23:53 PM Subject: Re: [AFMUG] Blistering world record WIFI transmission heralds new era in super-fast internet using a radio frequency of 71-76Hz. “Only in this frequency range of millimeter waves are the required high effective bandwidths available,” U 70 GHz maybe? At 10km though? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, May 25, 2016 at 12:21 PM, Steve <li...@wavedirect.org> wrote: > > https://www.rt.com/viral/344357-wifi-record-transmission-fraunhofer/ > > German scientists have smashed the radio wave data-speed barrier by > transmitting information equivalent to the contents of a conventional DVD > some 37km in under 10 seconds. >
Re: [AFMUG] fast.com utility
>From the same PC in the same office. 500Mb connection from upstream. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Joe Novak" <jno...@lrcomm.com> To: af@afmug.com Sent: Thursday, May 19, 2016 9:12:03 AM Subject: Re: [AFMUG] fast.com utility [image: Inline image 1] ^ from office below is from home.. [image: Inline image 2] Maybe the speedtest just isn't setup to scale well yet? On Thu, May 19, 2016 at 8:55 AM, Daniel White <afmu...@gmail.com> wrote: > What I find interesting is my results are different than everyone else. > > > > Of course Xfinity/Comcast certainly has better peering with Netflix than > the average WISP. Or the SpeedTest server I’m connecting to sucks. > > > > I’ll just blame my Mikrotik router. > > > > Daniel White > > Managing Director – Hardware Distribution Sales > > ConVergence Technologies > > Cell: +1 (303) 746-3590 > > dwh...@converge-tech.com > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Ken Hohhof > *Sent:* Thursday, May 19, 2016 7:51 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] fast.com utility > > > > Speed tests try to determine the characteristics of the last mile > connection, using some assumption about what happens when you reach its > capacity, like increased queuing delay or increased packet loss. They > probably work better when there is a physical limit like DSL line rate. > Speed tiers can be problematic, since there is often at least some burst > above the subscribed rate. I see this particularly on the speedtest.net > upstream graph, which will jump up to a high number and then gradually drop > the test rate until it finds the sustained rate, but customers interpret > the graph to mean the “speed” is not consistent. > > > > Speed tests also don’t account for typical use which is lots of different > content sharing the connection. Just because your 100M connection doesn’t > pull 100M from the speedtest.net server doesn’t necessarily mean you > can’t achieve 100M of typical mixed traffic. > > > > At least this new test is clear about what it is testing: how much > traffic can you pull from Netflix. And given how Netflix dominates > Internet traffic, that’s not an unrealistic thing to test. > > > > > > *From:* Daniel White <afmu...@gmail.com> > > *Sent:* Thursday, May 19, 2016 7:46 AM > > *To:* af@afmug.com > > *Subject:* Re: [AFMUG] fast.com utility > > > > So those Comcast results were from last night. Just ran again this > morning… > > > > > > [image: http://www.speedtest.net/result/5337806086.png] > > > > Daniel White > > Managing Director – Hardware Distribution Sales > > ConVergence Technologies > > Cell: +1 (303) 746-3590 > > dwh...@converge-tech.com > > > > *From:* Daniel White [mailto:afmu...@gmail.com <afmu...@gmail.com>] > *Sent:* Thursday, May 19, 2016 6:42 AM > *To:* 'af@afmug.com' <af@afmug.com> > *Subject:* RE: [AFMUG] fast.com utility > > > > On my Comcast connection its within a few Mbps. 100Mbps on Fast.com and > 105Mbps on Speedtest. > > > > Need to try my WISP connection later today. > > > > Daniel White > > Managing Director – Hardware Distribution Sales > > ConVergence Technologies > > Cell: +1 (303) 746-3590 > > dwh...@converge-tech.com > > > > *From:* Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] *On > Behalf Of *CBB - Jay Fuller > *Sent:* Wednesday, May 18, 2016 5:09 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] fast.com utility > > > > > > Judging from the last 5 posts, no one has yet... > > if his test server is inhouse as i think he said - i agree, should be an > interesting response > > > > - Original Message - > > *From:* Nate Burke <n...@blastcomm.com> > > *To:* af@afmug.com > > *Sent:* Wednesday, May 18, 2016 5:52 PM > > *Subject:* Re: [AFMUG] fast.com utility > > > > So then do you get full line speed results from the test? > > On 5/18/2016 5:51 PM, Cassidy B. Larson wrote: > > Interesting though, from watching tcpdump while doing a speedtest, I’m > seeing it hit BOTH of our local on-net Netflix appliances (over IPv6). > > > > > > On May 18, 2016, at 4:49 PM, Cassidy B. Larson <c...@infowest.com> wrote: > > > > 2620:108:700f::36f4:7ea4 and 205.251.244.235 are both Amazon IPs. > > Netflix uses a lot of EC2 stuff, so you’re not necessarily hitting their > “cache” when you pull up their website. > > > > > > On May 1
Re: [AFMUG] Source for equipment enclosures
We get our boxes from http://www.durhamcompany.com/ as with any manufacturer on a custom order they are about 7 weeks lead time from order placement to delivery. But they have worked with us to create two custom boxes and we are happy with them. We are on a commit with them for I think 10 boxes a month on a year long purchase order through a local redistributor (Harry Cooper Supply) and they just drop ship direct to our door. Not sure why there is a middle man, but it doesn't add to the price so we don't complain too much about the arrangement. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Casey | WISPA" <airl...@airlinkrb.com> To: af@afmug.com Sent: Thursday, May 5, 2016 6:51:54 AM Subject: Re: [AFMUG] Source for equipment enclosures Amprod.us Sent from my iPhone > On May 4, 2016, at 7:02 PM, Jaime Solorza <losguyswirel...@gmail.com> wrote: > > Saginaw > >> On May 4, 2016 3:33 PM, "Wireless Administrator" <wirel...@htn.net> wrote: >> Can anyone recommendation a supplier for custom stainless equipment >> enclosures in the $1700 range. Based on comments here we contracted to have >> ours built by Bison ProFab but that has been a disaster. We started working >> with them on 2/11 and they still do not have our first enclosure completed. >> None of the commitments they made have been realized. >> >> >> >> Can anyone recommend a reliable source? >> >> >> >> Steve B.
Re: [AFMUG] Padlock with tether (solution)
And if you wanted to get "fancy", you can use a carabiner to hold the other end
of the chain so it's easier to move around :)
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Bill Prince" <part15...@gmail.com>
To: af@afmug.com
Sent: Friday, April 29, 2016 2:50:16 PM
Subject: Re: [AFMUG] Padlock with tether (solution)
For crying out loud. Take some metal strapping, pinch it to fit around
the shackle, bolt it to a hardware chain. Done.
Probably a $1.50
bp
<part15sbs{at}gmail{dot}com>
On 4/29/2016 10:16 AM, Scott Vander Dussen wrote:
> This is one of those mind boggling websites that gives you everything
> you want with the exception of actually being able to purchase the
> product.
>
> Thanks,
> 'S
>
> Sent mobile!
>
> On Apr 29, 2016, at 10:14, Scott Vander Dussen <sc...@velociter.net
> <mailto:sc...@velociter.net>> wrote:
>
>> https://www.dropsafe.com/products/padlock/
>>
>> Thanks,
>> 'S
>>
>> Sent mobile!
>>
>> On Apr 29, 2016, at 10:06, Scott Vander Dussen <sc...@velociter.net
>> <mailto:sc...@velociter.net>> wrote:
>>
>>> Lol, there's an idea! I'm most concerned about dropping the lock
>>> when it's unlocked and the tower crew is working on the enclosure.
>>>
>>> Thanks,
>>> 'S
>>>
>>> Sent mobile!
>>>
>>> On Apr 29, 2016, at 09:37, Josh Luthman <j...@imaginenetworksllc.com
>>> <mailto:j...@imaginenetworksllc.com>> wrote:
>>>
>>>> Couldn't you just lock it?
>>>>
>>>> Josh Luthman
>>>> Office: 937-552-2340
>>>> Direct: 937-552-2343
>>>> 1100 Wayne St
>>>> Suite 1337
>>>> Troy, OH 45373
>>>>
>>>> On Apr 29, 2016 12:34 PM, "Scott Vander Dussen"
>>>> <sc...@velociter.net <mailto:sc...@velociter.net>> wrote:
>>>>
>>>> Looking for a lock, preferably combination that has a short
>>>> tether or provisions for adding one. It will be installed at
>>>> height and I want to prevent accidental dropping of the lock, thx.
>>>>
>>>> Thanks,
>>>> 'S
>>>>
>>>> Sent mobile!
>>>>
Re: [AFMUG] OT Donald Trump Says He Might Block Money Transfers to Mexico - WSJ
Not supporting one side of this argument or the other. I'm just going to interject some facts. It's a fact that McDonalds and other fast food is cheap. You can feed your family junk/fast food cheaper than you can healthy food. Which is why "poor" people are fatter in general. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Mike Hammett" <af...@ics-il.net> To: af@afmug.com Sent: Friday, April 8, 2016 7:23:42 AM Subject: Re: [AFMUG] OT Donald Trump Says He Might Block Money Transfers to Mexico - WSJ That just wreaks of the BS of their claims. - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "That One Guy /sarcasm" <thatoneguyst...@gmail.com> To: af@afmug.com Sent: Thursday, April 7, 2016 1:15:41 PM Subject: Re: [AFMUG] OT Donald Trump Says He Might Block Money Transfers to Mexico - WSJ How do poor people identify themselves for medical cards, food stamps, housing assistance, housing leases for that matter, and any of the other things the poor are entitled to? It would seem to me, that if poor people are unable to attain identification solely on the basis of being poor, they would all starve to death, without any shelter, since they are unable to be identified. Why are there so many obese poor people if they arent being fed because their financial situation dictates the inability to be identified? On that same note, how are poor criminals being incarcerated since their financial status disallows any mechanism for identification? On Thu, Apr 7, 2016 at 1:10 PM, Sean Heskett < af...@zirkel.us > wrote: Well the "premiss" of these laws it to prevent fraud. What actually happens because of the way they are written is that young and poor people end up having problems voting. I shouldn't have said black I should have said poor. Not all black people are poor and not all poor people are black. But the majority of people below the poverty line happen to be black. -Sean On Thursday, April 7, 2016, Jay Weekley < par...@cyberbroadband.net > wrote: Are blacks supposed to have a different ID than whites? Sean Heskett wrote: Also Wisconsin's voter ID law worked as intended to suppress the student and black vote. Yay 'Merica http://www.thenation.com/article/wisconsins-voter-id-law-caused-major-problems-at-the-polls-last-night/ -Sean On Thursday, April 7, 2016, Mathew Howard < mhoward...@gmail.com > wrote: While I'm not familiar with Texas' requirements, a quick google tells me they require one of the following: * Texas driver license issued by the Texas Department of Public Safety (DPS) * Texas Election Identification Certificate issued by DPS * Texas personal identification card issued by DPS * Texas license to carry a handgun issued by DPS * United States military identification card containing the person’s photograph * United States citizenship certificate containing the person’s photograph * United States passport Those are all government issued forms of photo ID... I don't really see anything inconsistent there. here in Wisconsin, at least some student ID's are acceptable... and there is a process for obtaining an ID card completely free if you can't pay for the necessary documentation. But as far as requiring a birth certificate to get an ID, how else do you go about proving that you're actually citizen? I really don't see anything unfair about requiring someone to prove they're a citizen to be eligible to vote. On Thu, Apr 7, 2016 at 11:06 AM, Sean Heskett < af...@zirkel.us <javascript:_e(%7B%7D,'cvml',' af...@zirkel.us ');>> wrote: The 42 member "freedom caucus" in the house only exists because of gerrymandering. They are in districts that are so skewed that only a super conservative "republican" could ever win. As for voter ID there is tons of evidence that absentee ballots have a lot of voter fraud but in person voting the fraud is less than .01%. All the voter ID laws are designed to suppress in person voting with an illegal "poll tax". Oh sure the ID might be "free" but the birth certificate you need to produce costs money. Also in texas you can use your hunting or fishing license but you can't use a student ID...even if the student ID was issued by a state school. Tell me exactly how those two things in this country are 1. Fair 2. Make America great?!?! -Sean On Thursday, April 7, 2016, Mike Hammett < af...@ics-il.net <javascript:_e(%7B%7D,'cvml',' af...@ics-il.net ');>> wrote: "conservative minority" HAH! Most people are in the middle and couldn't give a shit less, while indeed a minority fight for or against most things. "Progressive liberals" often forg
Re: [AFMUG] Winbox 3.3
I'm running 3.1 mostly without issue. My only problem is when connecting to
routers that are on 5.x. There are menu items missing, stuff like the routing
tab aren't there. But when connecting to 6.x routers it has been working
perfectly for me.
BTW: I'm running it under Wine on a Debian box.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Bill Prince" <part15...@gmail.com>
To: af@afmug.com
Sent: Sunday, March 20, 2016 4:26:14 PM
Subject: Re: [AFMUG] Winbox 3.3
I have to admit, we were trying to trade address lists between the "mac
winbox", which actually may be a basterdized version that is in some
limbo-land between 3.x and 2.x. As long as your winbox is actually
running on windows, then the issues are more muted.
bp
<part15sbs{at}gmail{dot}com>
On 3/20/2016 2:10 PM, George Skorup wrote:
> Hm. Well, I just exported my 2.x address list and it imported into 3.3
> no problem. Then I did the groups. So far looks like it's working with
> no random crap yet. I renamed my 2.2.18 exe and will keep it
> around for a while.
>
> On 3/20/2016 3:16 PM, Bill Prince wrote:
>> I've tried it a few times with mixed results. I know that the router
>> access list is not interchangeable between 3.x and 2.x. I'm still
>> using 2.2.18 because of the various glitches. Kind of stupid that
>> there's no easy D/L of any of the 2.x versions.
>>
>> bp
>> <part15sbs{at}gmail{dot}com>
>>
>> On 3/20/2016 1:01 PM, George Skorup wrote:
>>> Anyone using it yet? Any issues? The last time I tried any Winbox
>>> 3.x (3.2 I think), it was really stupid. Had a bunch of routers that
>>> then no longer stored preference info when connecting with Winbox 2.
>>> Then I think the next 3.x beta did something that fixed it, and I
>>> gave up on 3.x.
>>
>
Re: [AFMUG] Need FSK APs, will travel
You can get the regulators from Mouser.com as well. I have a tube of them laying around here somewhere for in-house repairs. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Ken Hohhof" <af...@kwisp.com> To: af@afmug.com Sent: Thursday, March 10, 2016 10:33:29 AM Subject: Re: [AFMUG] Need FSK APs, will travel No lead solder has made rework 10x harder. -Original Message- From: Chuck McCown Sent: Thursday, March 10, 2016 10:20 AM To: af@afmug.com Subject: Re: [AFMUG] Need FSK APs, will travel If you have anyone in your shop that has worked with surface mount devices before, I would seriously try the regulator transplant. You can take a box cutter and remove the old one by cutting the pins/legs real close to the body of the part. Then use an iron to mop up and remove the leg remenants. Removing the donor from the SM is a but more touchy. You will need solder wick. Absorb the solder from each leg and try to gently get them to release one by one. Sometimes you can pry them up under heat with a long pin or needle. Once the doner is off and the legs are pretty much straight and looking more or less like they looked when soldered down, all you have to do is place it on the board and hit each leg with an iron, supplying a bit of pressure as the solder on the leg and the solder left on the pad flow. -Original Message- From: Scott Vander Dussen Sent: Thursday, March 10, 2016 9:16 AM To: af@afmug.com Subject: Re: [AFMUG] Need FSK APs, will travel 5.7ghz -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Thursday, March 10, 2016 8:11 AM To: af@afmug.com Subject: Re: [AFMUG] Need FSK APs, will travel What frequency? -Original Message- From: Scott Vander Dussen Sent: Thursday, March 10, 2016 9:07 AM To: 'AF Cambium List (af@afmug.com)' Subject: [AFMUG] Need FSK APs, will travel I'm in the market for 3-6 FSK APs today somewhere in central California. I'll come pick them up! Please hit me off-list if you have any, boards without cases OK. We're searching our inventory now for spares. Or call 209-838-1221 x905. Thx, Scott
Re: [AFMUG] FSK power problem?
Live an learn. At least you'll never do it again (hopefully). -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Chuck McCown" <ch...@wbmfg.com> To: af@afmug.com Sent: Thursday, March 10, 2016 10:02:07 AM Subject: Re: [AFMUG] FSK power problem? We all just shed a collective tear... At least tomorrow is Friday, right? Spring his here! Jaime is bound to put some photos of good food on the list. Plenty of reasons to continue to live Scott. From: Scott Vander Dussen Sent: Thursday, March 10, 2016 8:58 AM To: af@afmug.com Subject: Re: [AFMUG] FSK power problem? Oh wow, that’s fairly misleading. So I just smoked a ring of FSK. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Baird Sent: Thursday, March 10, 2016 7:56 AM To: af@afmug.com Subject: Re: [AFMUG] FSK power problem? Yeah, the SI's take up to ~60V, but they output what you feed them. If you feed them 48V, they output 48V. They do not have internal DC/DC converters unless I completely missed a new product announcement from Forrest (but, I don't see this product on the website). On Thu, Mar 10, 2016 at 10:55 AM, Scott Vander Dussen <sc...@velociter.net> wrote: Thanks, `S --- Sent mobile, typed by thumbs. On Mar 10, 2016, at 07:53, Josh Baird <joshba...@gmail.com> wrote: I haven't heard of this magical SyncInjector with a built in DC-DC converter that you speak of! On Thu, Mar 10, 2016 at 10:48 AM, Scott Vander Dussen <sc...@velociter.net> wrote: Yes, but we're using SyncInjector version IO which allows 24-56VDC input and regulates that back down to 24VDC for the radios. -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Thursday, March 10, 2016 7:39 AM To: af@afmug.com Subject: Re: [AFMUG] FSK power problem? Dumb question: You know the FSK have an absolute max input voltage of 30 VDC with the smoke exit voltage around 36 VDC, right? -Original Message- From: Scott Vander Dussen Sent: Thursday, March 10, 2016 8:34 AM To: af@afmug.com Subject: [AFMUG] FSK power problem? We just changed out a 24vdc 20A AC/DC power supply with a 48vdc rectifier. This powers 4 Syncinjectors and 2 Netonix. There is a mix of 450 and FSK APs in each of those Syncinjectors. When we powered back up 6 of the 6 FSK wont establish eth link with the Netonix, all the 450 are fine. Ideas? Tower climber en route but I'm stumped. TIA Thanks, `S --- Sent mobile, typed by thumbs.
Re: [AFMUG] racmount kit for Packetflux SyncInjector?
Our rail cutter was only $5 from harbor-freight. It's called a hacksaw. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "George Skorup" <geo...@cbcast.com> To: af@afmug.com Sent: Monday, February 29, 2016 6:21:27 PM Subject: Re: [AFMUG] racmount kit for Packetflux SyncInjector? I've found that aluminum rail tends to be much more forgiving. Something about the steel rail always gave me fitment issues. Perhaps the Phoenix Contact steel stuff I was using is just slightly over sized. Aluminum all the way now. Easier to cut and clean. And no, there's no way in hell I'd every spend $$ on a rail cutter for the one or two a month that I do. On 2/29/2016 2:04 PM, Ken Hohhof wrote: > I’m talking about my experience that the clip won’t latch to the DIN > rail unless you pull the tab slightly forward. Not prying with a > little screwdriver to unlatch it, that’s expected. > *From:* Forrest Christian (List Account) <mailto:li...@packetflux.com> > *Sent:* Monday, February 29, 2016 1:33 PM > *To:* af <mailto:af@afmug.com> > *Subject:* Re: [AFMUG] racmount kit for Packetflux SyncInjector? > > We just added common parts to the store late last week. Evidently we > need to do a better job of describing some of them. > > The end of the din clip on the syncinjector was hidden slightly behind > the syncinjector on purpose. The idea is that a small screwdriver can > be placed in the hole on the bottom of the din clip and the bottom of > the syncinjector can be used as a fulcrum point to enable easy removal > of the clip from the din rail. > > On Feb 29, 2016 9:02 AM, "Ken Hohhof" <af...@kwisp.com > <mailto:af...@kwisp.com>> wrote: > > No, I think you want this: > > http://store.packetflux.com/din-rail-mounting-kit-for-rev-h-i-syncinjectors/ > The thing you linked to is essentially a tiny piece of plastic DIN > rail for wallmounting stuff that is already DIN rail mountable. > Also note the DIN rail mounting kit for Syncinjectors can be fussy > about snapping onto the rail until you figure out the lever may > need to be pulled forward a bit. Easy if you can get a finger > behind it, if you have it in close quarters you might need to > improvise a tool to hook it. > *From:* Kurt Fankhauser <mailto:lists.wavel...@gmail.com> > *Sent:* Monday, February 29, 2016 10:51 AM > *To:* af@afmug.com <mailto:af@afmug.com> > *Subject:* Re: [AFMUG] racmount kit for Packetflux SyncInjector? > is this the proper product to DIN rail mount my sync injector? > http://store.packetflux.com/din-rail-clip/ > On Sun, Feb 28, 2016 at 9:21 PM, Jeremy <jeremysmi...@gmail.com > <mailto:jeremysmi...@gmail.com>> wrote: > > Wow, I totally botched that earlier. The Brother printer FAQ > is likely not going to help with a Packetflux rack mount. Too > many windows open! > On Sun, Feb 28, 2016 at 2:08 PM, Jeremy > <jeremysmi...@gmail.com <mailto:jeremysmi...@gmail.com>> wrote: > > This would probably work > > http://support.brother.com/g/b/faqend.aspx?c=us=en=mfc8480dn_us=1984=faq0185_003 > On Sun, Feb 28, 2016 at 12:34 PM, Chuck McCown > <ch...@wbmfg.com <mailto:ch...@wbmfg.com>> wrote: > > Buy a small CNC milling machine. Get BUD or Hammond > or others from Mouser or Digi-Key and modify them. > Only way to keep the cost out. > *From:* Forrest Christian (List Account) > <mailto:li...@packetflux.com> > *Sent:* Saturday, February 27, 2016 9:44 PM > *To:* af <mailto:af@afmug.com> > *Subject:* Re: [AFMUG] racmount kit for Packetflux > SyncInjector? > > The units are designed to fit on a standard 1u shelf. > Zip ties. Velcro. Bolts into the wall mount keyholes > etc. > > On a related note, if anyone knows a enclosure > manufacturer I can buy custom 1u enclosures from in > reasonable quantities (hundred or hundreds) without > paying an arm and three legs please let me know. > We've been having a hard time finding a vendor... I > lost track of how many vendors we've unsuccessfully > tried to get those from. > > On Feb 27, 2016 11:33 AM, "Kurt Fankhauser" > <lists.wavel...@gmail.com > <mailto:lists.wavel...@gmail.com>> wrote: > > Is there any rackmount kits out there for the > packet flux sync injectors? Just looked over their > website and only seen a DIN rail option? Is anyone > making something possibly 3rd party for this? >
Re: [AFMUG] OT Apple
Problem is that once you do it. It's done and they can do it again, and again. If you think it will only ever get used on this ONE phone then you are delusional. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "George Skorup" <geo...@cbcast.com> To: af@afmug.com Sent: Friday, February 19, 2016 5:05:38 PM Subject: Re: [AFMUG] OT Apple As I understand it, that is exactly what the gov is asking them for. FBI wants Apple to decrypt and send over the data. Nothing more. No "software on every phone" to do this. Just that ONE phone. Get the data, then incinerate the device. On 2/19/2016 4:59 PM, Nate Burke wrote: > But they're not actually asking for a back door, are they?� They're > just saying 'hey, we have this physical device, can we give it to you, > and you get us the data off of it'?� I've got to think that the > Engineers at apple have a way to do this thought up.� > > Although at the same time, If they're trying to unlock the phone, > couldn't the Gov't with it's vast resources, just simply make a bit by > bit copy of the flash chip in the phone and just go through and try > every unlock code? > > On 2/19/2016 4:54 PM, Josh Reynolds wrote: >> >> Yup. Google agrees as well. >> >> On Feb 19, 2016 4:52 PM, "Sam Lambie" <samtaos...@gmail.com >> <mailto:samtaos...@gmail.com>> wrote: >> >> Screw the govt. Apple is doing entirely doing the right thing. >> >> On Fri, Feb 19, 2016 at 3:47 PM, Nate Burke <n...@blastcomm.com >> <mailto:n...@blastcomm.com>> wrote: >> >> My Boss and I just had a discussion about this, he think that >> Cook should be in Jail for failing to comply with the order.� >> >> On 2/19/2016 4:46 PM, Josh Reynolds wrote: >>> >>> ... What? >>> >>> Seriously? >>> >>> On Feb 19, 2016 4:44 PM, <ch...@wbmfg.com >>> <mailto:ch...@wbmfg.com>> wrote: >>> >>> Treason? >>> >> >> >> >> >> -- >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 Office >> www.Taosnet.com <http://www.newmex.com> >> >
Re: [AFMUG] OT Have Gravitational Waves Finally Been Spotted? No food pictures
Yeah, my wife is in Japan right now visiting friends and family. She's posted some food pics over the last few days that look delicious. :) -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Simon Westlake" <simon@sonar.software> To: af@afmug.com Sent: Tuesday, February 9, 2016 10:18:04 AM Subject: Re: [AFMUG] OT Have Gravitational Waves Finally Been Spotted? No food pictures Nice, I love Japanese food. I have a friend I grew up with in the UK that moved to Japan, and he's always posting pictures of what he's eating on Facebook, gives me a lot of hunger pains. On 2/9/2016 10:09 AM, Christopher Tyler wrote: > Since Jamie is always posting his lunch and dinner, figured I'd show y'all > what I had for dinner last night too. :) > > It's ton katsu. It's a Japanese dish, breaded pork, pan fried in grease > (Crisco not veggie oil), with a Japanese sauce on top, with a side of steamed > rice. One of my favorite dishes. > -- Simon Westlake Skype: Simon_Sonar Email: simon@sonar.software Phone: (702) 447-1247 --- Sonar Software Inc The next generation of ISP billing and OSS https://sonar.software
Re: [AFMUG] [FS] Netonix WS-24-400B
It's nothing to do with the switches themselves, we use Netonix a lot and recommend them to anyone looking for a PoE switch. The 24 port is just too big for what we need. We got them when we fist started using Netonix thinking that we would use a lot more of the 24 ports than we do. What we found is that we are only really using the 12 port version. And where we need more we end up just doubling up two 12's. The 24 port is just overkill at 99% of our tower sites. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Josh Reynolds" <j...@kyneticwifi.com> To: af@afmug.com Sent: Friday, February 5, 2016 8:13:13 AM Subject: Re: [AFMUG] [FS] Netonix WS-24-400B Wow! Any particular reason why? On Feb 5, 2016 8:09 AM, "Christopher Tyler" <ch...@totalhighspeed.net> wrote: > For Sale > We have seven, 24 port netonix switches (model WS-24-400B), new in box, > $449.95 OBO. Buy one or the whole lot. > > -- > Christopher Tyler > MTCRE/MTCNA/MTCTCE/MTCWE > Total Highspeed Internet Services > 417.851.1107 >
Re: [AFMUG] UPS
We have an ICT that is exactly this. 1U no internal battery, external hookup. Kinda pricey though. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Matt" <matt.mailingli...@gmail.com> To: af@afmug.com Sent: Tuesday, February 2, 2016 10:45:56 AM Subject: Re: [AFMUG] UPS Currently my load on a couple sites in question is less then 300 watts. Might grow but Canopy AP's and BH's do not draw a lot. On Tue, Feb 2, 2016 at 10:39 AM, Lewis Bergman <lewis.berg...@gmail.com> wrote: > Thee are 1U UPS with an internal battery and an external battery connector. > Just bought one from Eaton. The issue is not the battery size but that the > rating is always paired with batteries of a similar size. So if you want > almost no batteries you could get a 500 watt 1U UPS but then you would > likely just overload the UPS if you hooked a bunch of batteries to it and > loaded it with 5000 watts of load no matter how short the battery time you > need is. > > On Tue, Feb 2, 2016 at 10:32 AM Matt <matt.mailingli...@gmail.com> wrote: >> >> Is there such a thing as a small 1U rack mount UPS that has no >> internal batteries but only external battery terminal? Would be nice >> for some of our bigger sites with auto start generators.
Re: [AFMUG] Cell Phone Gripe
Try something like the Swype keyboard? -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Lewis Bergman" <lewis.berg...@gmail.com> To: af@afmug.com Sent: Tuesday, January 26, 2016 10:16:38 AM Subject: Re: [AFMUG] Cell Phone Gripe I dunt now why that's brothers you. On Tue, Jan 26, 2016 at 10:11 AM Nate Burke <n...@blastcomm.com> wrote: > I found this one http://www.amazon.com/gp/product/B014NE0BGG/ but you > lose the ability to have any sort of clip function, and I'm not sure you'd > be able to use it without having it set on a table. > > On 1/26/2016 9:59 AM, Josh Luthman wrote: > > You can type on that?? > > Josh Luthman > > > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Jan 26, 2016 10:55 AM, "Steve Utick" <sut...@gmail.com> wrote: > >> I picked up a small inexpensive one like this, and have been pretty happy >> with it so far: >> >> >> http://www.ebay.com/itm/wireless-keyboard-with-touchpad-Rii-Tek-mini-keyboard-Mouse-for-PC-Bluetooth-/331759726852?hash=item4d3e6bb104:g:Te4AAOSwUV9WoUE6 >> >> >> >> On Tue, Jan 26, 2016 at 8:41 AM, Josh Luthman < >> j...@imaginenetworksllc.com> wrote: >> >>> Has anyone found a nice Bluetooth keyboard to use here? >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> On Jan 26, 2016 10:37 AM, "Adam Moffett" <dmmoff...@gmail.com> wrote: >>> >>>> Definitely something you get used to over time. >>>> >>>> If you're using it for RDP, or anything that needs serious typing, I >>>> would just order a bluetooth keyboard for around $25. >>>> >>>> >>>> On 1/26/2016 10:31 AM, Nate Burke wrote: >>>> >>>>> The Boss got a new Note 5 yesterday. How do yall live with on screen >>>>> keyboards? I tried using it for like 10 minutes and got too frustrated. >>>>> 80% miss-type, and losing 3/4 of the screen anytime you need to type >>>>> something (RDP Is almost completely impossible). Am I just too old to use >>>>> this technology? Maybe using it now and then over the coming weeks things >>>>> will get better, but right now it's STRANGE and DIFFERENT and I DON'T LIKE >>>>> IT. >>>>> >>>> >>>> >>
Re: [AFMUG] Single homed to multi, full partial or default route ?
You could always start with partial routes and then later get full if you need them or vice versa. It's not a decision that cannot be changed at a later date. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Ken Hohhof" <af...@kwisp.com> To: af@afmug.com Sent: Friday, January 22, 2016 9:34:50 AM Subject: Re: [AFMUG] Single homed to multi, full partial or default route ? If you do all that, cool. Otherwise, it could be like my college roommate who asked an athlete his secrets. The athlete told him to work out at the gym 4 hours a day, eat protein supplements, and drink grapefruit juice. The first two sounded like too much work, so my roommate drank grapefruit juice. From: Mike Hammett Sent: Friday, January 22, 2016 9:13 AM To: af@afmug.com Subject: Re: [AFMUG] Single homed to multi, full partial or default route ? True, but in most situations, more information allows for better control. You could use the table (combined with flows) to see that you have a problem with upstream A and carrier B. You could then use a BGP community to tell upstream A not to announce your routes to carrier B. You could then filter routes from carrier B via Upstream A. Upstream A may then send your traffic to carrier C or you may determine that a better path is via upstream D. Can't do that without full tables. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com From: "Ken Hohhof" <af...@kwisp.com> To: af@afmug.com Sent: Friday, January 22, 2016 8:49:09 AM Subject: Re: [AFMUG] Single homed to multi, full partial or default route ? If you just use the shortest AS path, not sure that is really taking control. I’m thinking of a scenario where you have one cheap upstream and one high quality upstream that monitors for interconnection problems like packet loss and latency and tweaks their routing table. I don’t think BGP will automate those decisions for you. But if the cheap upstream has direct peering or colocated servers from a bunch of CDNs, might as well send that outbound traffic to them. From: Paul Stewart Sent: Friday, January 22, 2016 5:34 AM To: af@afmug.com Subject: Re: [AFMUG] Single homed to multi, full partial or default route ? Would suggest full routes everytime if possible .. depends on how much control you want over your paths though .. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Cassidy B. Larson Sent: Thursday, January 21, 2016 9:24 PM To: af@afmug.com Subject: Re: [AFMUG] Single homed to multi, full partial or default route ? I’d just request local + customer routes + peer routes and a default from your upstreams. If it’s more than 3 AS hops away it’s probably a toss up which way is better to go out. On Jan 21, 2016, at 7:14 PM, TJ Trout <t...@voltbb.com> wrote: I'm a complete idiot and I just turned up 2 upstreams, butch Evans will be setting up the bgp, he said I can take full routes, partial router /20 and larger or default routes, anyone able to tell me the best choice and the pros and cons of each ? Thanks a million
[AFMUG] SyncPipe Parasitic
Looking for some used SyncPipe Parasitics, hit me offlist if you have some. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107
Re: [AFMUG] ex Aereo CEO starting a wisp?
Michael: "I must have put a decimal point in the wrong place or something. Shit, I always do that. I always mess up some mundane detail.: Peter: "Oh! Well, this is not a mundane detail, Michael!" -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Faisal Imtiaz" <fai...@snappytelecom.net> To: af@afmug.com Sent: Friday, January 22, 2016 9:41:26 AM Subject: Re: [AFMUG] ex Aereo CEO starting a wisp? FCC app says 38ghz, the reports are not know to be able to do the math and count the zeros correctly ! It's only a decimal point :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net - Original Message - > From: "Ken Hohhof" <af...@kwisp.com> > To: af@afmug.com > Sent: Friday, January 22, 2016 10:36:47 AM > Subject: Re: [AFMUG] ex Aereo CEO starting a wisp? > So how are they using 3.8 GHz? Or is that a mistake in the article and they > mean 38 GHz? > > > -Original Message- > From: Josh Reynolds > Sent: Friday, January 22, 2016 9:22 AM > To: af@afmug.com > Subject: Re: [AFMUG] ex Aereo CEO starting a wisp? > > *sits back and grabs a scotch and a bucket of popcorn* > > On Fri, Jan 22, 2016 at 9:21 AM, Rory Conaway <r...@triadwireless.net> > wrote: >> This will be interesting. Their model is major cities instead of rural. >> From the article, it looks like a combination of mesh and some proprietary >> indoor wireless router. I would really like to see their business plan. >> >> >> >> Rory >> >> >> >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jaime Solorza >> Sent: Friday, January 22, 2016 7:30 AM >> To: Animal Farm >> Subject: Re: [AFMUG] ex Aereo CEO starting a wisp? >> >> >> >> You know these folks? >> >> On Jan 22, 2016 6:38 AM, "Gino Villarini" <ginovi...@gmail.com> wrote: >> > > http://variety.com/2016/digital/news/aereo-founder-wireless-internet-access-startup-starry-project-decibel-1201685350/
Re: [AFMUG] OT: Apparently this has been going on a long time...
Cover charge... :)
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "That One Guy /sarcasm" <thatoneguyst...@gmail.com>
To: af@afmug.com
Sent: Tuesday, January 19, 2016 11:06:23 AM
Subject: Re: [AFMUG] OT: Apparently this has been going on a long time...
I suspect his make mexico pay for it is an entry fee at the gate
On Tue, Jan 19, 2016 at 10:19 AM, Sterling Jacobson <sterl...@avative.net>
wrote:
> Lol!
>
>
>
> Trump.
>
>
>
>
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Bill Prince
> *Sent:* Tuesday, January 19, 2016 9:18 AM
> *To:* af@afmug.com
> *Subject:* [AFMUG] OT: Apparently this has been going on a long time...
>
>
>
> bp
>
> <part15sbs{at}gmail{dot}com>
>
>
>
>
>
>
>
--
If you only see yourself as part of the team but you don't see your team as
part of yourself you have already failed as part of the team.
Re: [AFMUG] OT: Nice Round Numbers
Col. Sanders. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Josh Luthman" <j...@imaginenetworksllc.com> To: af@afmug.com Sent: Monday, January 18, 2016 1:12:16 PM Subject: Re: [AFMUG] OT: Nice Round Numbers I have the same code on my luggage!!! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Jan 18, 2016 at 2:10 PM, Nate Burke <n...@blastcomm.com> wrote: > I just opened a support ticket with a company and got ticket #12345 I feel > Like I should win a prize. >
Re: [AFMUG] OT: Exchange Server replacement
Inhouse Zimbra server. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Chuck McCown" <ch...@wbmfg.com> To: af@afmug.com Sent: Monday, January 18, 2016 4:02:59 PM Subject: Re: [AFMUG] OT: Exchange Server replacement OS2 From: Paul McCall Sent: Monday, January 18, 2016 3:01 PM To: af@afmug.com Subject: [AFMUG] OT: Exchange Server replacement Our Microsoft Small Business server 2011 is getting “long in the tooth” and my Unix guys are expressing the desire to explore other options. I have grown accustom to MS servers, even though they can be a resource hog. I use Touchdown client with my Android phone and “if just works” I don’t want to do a cloud based replacement per se. Not comfortable with my entire business email system, etc. being out in the world. S…. What have you guys moved to for an Exchange type alternative? Paul Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com pa...@pdmnet.net
Re: [AFMUG] OT - Captilism (was Martin Shkreli)
And a free cell phone so they can call the pharmacy. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Jay Weekley" <par...@cyberbroadband.net> To: af@afmug.com Sent: Friday, December 18, 2015 9:27:13 AM Subject: Re: [AFMUG] OT - Captilism (was Martin Shkreli) They need clothing and transportation to food, water, shelter and medicine. Or free delivery. Josh Luthman wrote: > Food, water, shelter, medicine. The things anyone and everyone need > to survive. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Dec 18, 2015 at 10:04 AM, Cameron Crum <cc...@wispmon.com > <mailto:cc...@wispmon.com>> wrote: > > Since when has it been a basic human right? Where does it stop? > Why are others forced to pay for peoples bad habits? Other than > congenital defects, and some accidents, most health problems are > due to peoples choices. If our money is to be confiscated to pay > for everyone's "human right", don't we get a say in how they live? > How many other human rights are being trampled on then? > > > > On Fri, Dec 18, 2015 at 8:56 AM, Josh Luthman > <j...@imaginenetworksllc.com <mailto:j...@imaginenetworksllc.com>> > wrote: > > Should medicine really be part of a system of supply and > demand? I'd agree on the whole hotel thing - you don't have > to stay there - but when you have some medical condition (and > while yes AIDS is something you can certainly avoid) I think > as a society and a culture we shouldn't deny a basic human right. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Dec 18, 2015 at 9:47 AM, Lewis Bergman > <lewis.berg...@gmail.com <mailto:lewis.berg...@gmail.com>> wrote: > > I can't defend his brashness, but the fact remains that > pure capitalism is the best way demonstrated to date to > innovate and health care or pharma is not exempt. Big > rewards encourage big effort yielding big results. These > pharma companies have something like 7 years until the > exclusivity period expires. That can be a pretty short > time to recover investments. This particular case may be a > bit extreme but to say that capitalism is broken in > America is simply ludicrous. > > I recently attended my sons graduation from Texas Tech on > a Friday. Thursday night at the hotel was $159 and Friday > was $269. I don't think that is price gouging. I think it > is a reflection of the simple fact that there are fewer > rooms available on that particular night than are demanded > at $159. The equilibrium was found at $259 where supply > and demand come closer to being equal. At that price I > still witnessed people turned away wanting a room due to > their poor planning. I don't think that is price gouging. > Their hotel was full at $269 a night. The next day was > $159 again. Since the hotel was full they probably could > have been even higher. > > I really don't understand what people have such a huge > issue with the fundamental theory of supply and demand. > Yes I understand that it is a potentially life saving > drug. There are other cheaper treatments. Maybe they > aren't as good, which is why they are cheaper. When did we > stop rewarding people for the value they provide? I know > this jerk didn't invent it but he obviously was willing to > reward those who did with a price they thought fair. Sales > over the next few years will prove if he made a mistake. > > Why not force Chuck to sell a unique mount he made for 5% > over cost? Heck, why not only cover his cost? Why not less > than cost and force him to provide his great product for > the good of the people? There is a reason it is named > Animal Farm. How many have read this book? While not about > capitalism it does speak to the kind of central control > that skulks below the overt argument for "controlling" > this type of behavior. > > I know people might die. I'll put on my really jerky hat >
Re: [AFMUG] OT - Captilism (was Martin Shkreli)
I like the insulting frenshman from The Holy Grail better. :) https://www.youtube.com/watch?v=A8yjNbcKkNY -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Ken Hohhof" <af...@kwisp.com> To: af@afmug.com Sent: Friday, December 18, 2015 9:38:44 AM Subject: Re: [AFMUG] OT - Captilism (was Martin Shkreli) I have the TV news channel on and they just played a clip from the movie “Christmas Vacation” that I could borrow to describe Shkreli: I want him brought from his happy holiday slumber over there on Melody Lane with all the other rich people and I want him brought right here, with a big ribbon on his head, and I want to look him straight in the eye and I want to tell him what a cheap, lying, no-good, rotten, four-flushing, low-life, snake-licking, dirt-eating, inbred, overstuffed, ignorant, blood-sucking, dog-kissing, brainless, dickless, hopeless, heartless, fat-ass, bug-eyed, stiff-legged, spotty-lipped, worm-headed sack of monkey shit he is! Hallelujah! Holy shit! Where's the Tylenol? From: Josh Luthman Sent: Friday, December 18, 2015 9:34 AM To: af@afmug.com Subject: Re: [AFMUG] OT - Captilism (was Martin Shkreli) Damn you guys are brutal! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Dec 18, 2015 at 10:33 AM, Ken Hohhof <af...@kwisp.com> wrote: Bah, humbug. -Original Message----- From: Christopher Tyler Sent: Friday, December 18, 2015 9:28 AM To: af@afmug.com Subject: Re: [AFMUG] OT - Captilism (was Martin Shkreli) And a free cell phone so they can call the pharmacy. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Jay Weekley" <par...@cyberbroadband.net> To: af@afmug.com Sent: Friday, December 18, 2015 9:27:13 AM Subject: Re: [AFMUG] OT - Captilism (was Martin Shkreli) They need clothing and transportation to food, water, shelter and medicine. Or free delivery. Josh Luthman wrote: Food, water, shelter, medicine. The things anyone and everyone need to survive. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Dec 18, 2015 at 10:04 AM, Cameron Crum <cc...@wispmon.com <mailto:cc...@wispmon.com>> wrote: Since when has it been a basic human right? Where does it stop? Why are others forced to pay for peoples bad habits? Other than congenital defects, and some accidents, most health problems are due to peoples choices. If our money is to be confiscated to pay for everyone's "human right", don't we get a say in how they live? How many other human rights are being trampled on then? On Fri, Dec 18, 2015 at 8:56 AM, Josh Luthman <j...@imaginenetworksllc.com <mailto:j...@imaginenetworksllc.com>> wrote: Should medicine really be part of a system of supply and demand? I'd agree on the whole hotel thing - you don't have to stay there - but when you have some medical condition (and while yes AIDS is something you can certainly avoid) I think as a society and a culture we shouldn't deny a basic human right. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Dec 18, 2015 at 9:47 AM, Lewis Bergman <lewis.berg...@gmail.com <mailto:lewis.berg...@gmail.com>> wrote: I can't defend his brashness, but the fact remains that pure capitalism is the best way demonstrated to date to innovate and health care or pharma is not exempt. Big rewards encourage big effort yielding big results. These pharma companies have something like 7 years until the exclusivity period expires. That can be a pretty short time to recover investments. This particular case may be a bit extreme but to say that capitalism is broken in America is simply ludicrous. I recently attended my sons graduation from Texas Tech on a Friday. Thursday night at the hotel was $159 and Friday was $269. I don't think that is price gouging. I think it is a reflection of the simple fact that there are fewer rooms available on that particular night than are demanded at $159. The equilibrium was found at $259 where supply and demand come closer to being equal. At that price I still witnessed people turned away wanting a room due to t
Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy and why
It's not a US thing... http://www.infoplease.com/ipa/A0777958.html -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Sean Heskett" <af...@zirkel.us> To: af@afmug.com Sent: Tuesday, December 8, 2015 8:42:11 AM Subject: Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy and why Sometimes I just like stirring the pot ;) I'm not saying one way is better or worse. BUT our current system obviously seems to be failing because we are the only 1st world country with a mass shooting problem of this magnitude. -Sean On Monday, December 7, 2015, George Skorup <geo...@cbcast.com> wrote: > So then you'll take your guns to the police or sheriff and tell them you > don't need them anymore? > > On 12/7/2015 9:43 PM, Sean Heskett wrote: > > Australia had a gun problem...until it didn't anymore. > > Just sayin > > -Sean > > > On Monday, December 7, 2015, Chuck McCown < > <javascript:_e(%7B%7D,'cvml','ch...@wbmfg.com');>ch...@wbmfg.com > <javascript:_e(%7B%7D,'cvml','ch...@wbmfg.com');>> wrote: > >> On the assault rifle issue, are we just arguing about magazine size? >> >> Or does it need a handle on top and a pistol grip? >> How does a BAR differ from an AR? Assuming they are the same caliber. >> BAR is OK because it only shoots deer, but the AR is for shooting people? >> Wood stock good, green metal and plastic bad? >> >> Semi automatic deer hunting rifles are OK, right? >> >> Is this a distinction without a difference? >> >> *From:* Sean Heskett >> *Sent:* Monday, December 07, 2015 3:31 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy >> and why >> >> i have a Glock23 .40cal works great but it's not quite a "conceal carry" >> size. I have it (unloaded and trigger locked) in my survival pack that >> stays in my airplane incase of an emergency landing in the back country ;-) >> >> i'm also a Progressive Libtard (registered independent) that thinks we >> should ban assault rifles and large magazines just as we have banned hand >> grenades, bombs, rocket launchers and other military style/grade weapons. >> I've had my Hunter's safety card since I was 12 and I also went to high >> school next to Columbine in CO. My younger sister had friends who died in >> the attack. >> >> 2 cents. >> >> -Sean >> >> >> On Mon, Dec 7, 2015 at 3:01 PM, James Howard <ja...@litewire.net >> <javascript:_e(%7B%7D,'cvml','ja...@litewire.net');>> wrote: >> >>> It wasn’t just the backstrap that bothered me. Mostly the diamond >>> pattern just didn’t feel good in my hands. I just did a bit of looking now >>> though and it looks like there are some options for fixing that. I might >>> have to look into them again. I really like the Sig P938 so far though. >>> >>> >>> >>> I missed your comment about Glock fanboys. Shocking we haven’t had any >>> so far but the thread devolved into politics from a simple question of what >>> brand/model of pistol we like. For the record, I’ve yet to meet a Glock >>> that I’d want to own. >>> >>> >>> >>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Reynolds >>> *Sent:* Monday, December 07, 2015 11:08 AM >>> *To:* af@afmug.com <javascript:_e(%7B%7D,'cvml','af@afmug.com');> >>> *Subject:* Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy >>> and why >>> >>> >>> >>> XDS has replaceable grip backstraps. >>> >>> >>> >>> On Mon, Dec 7, 2015 at 11:04 AM, James Howard <ja...@litewire.net >>> <javascript:_e(%7B%7D,'cvml','ja...@litewire.net');>> wrote: >>> >>> Sig P938 is 9mm and almost exactly the same size as a P238. I’ve got >>> the SAS model (anti snag). I’ve also got a S M Shield in 9mm and have >>> looked at the Springfield XDS many times. I just can’t get over the fact >>> that I don’t like the grips on the XDS. Prime reason to go with the XDS is >>> that you can get it in 45ACP. There are a lot of cheaper brands out there >>> too. >>> >>> >>> >>> If you have a place where you can do it, go and test fire all the >>> different options. My father-in-law bought a Glock 36 because several >>> people told him how great they were. The problem is that it doesn’t fit >>> his hand well at all and the trigger digs into his finger so
Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy and why
There should be a 'just' in there... :) -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Christopher Tyler" <ch...@totalhighspeed.net> To: af@afmug.com Sent: Tuesday, December 8, 2015 9:06:03 AM Subject: Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy and why It's not a US thing... http://www.infoplease.com/ipa/A0777958.html -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Sean Heskett" <af...@zirkel.us> To: af@afmug.com Sent: Tuesday, December 8, 2015 8:42:11 AM Subject: Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy and why Sometimes I just like stirring the pot ;) I'm not saying one way is better or worse. BUT our current system obviously seems to be failing because we are the only 1st world country with a mass shooting problem of this magnitude. -Sean On Monday, December 7, 2015, George Skorup <geo...@cbcast.com> wrote: > So then you'll take your guns to the police or sheriff and tell them you > don't need them anymore? > > On 12/7/2015 9:43 PM, Sean Heskett wrote: > > Australia had a gun problem...until it didn't anymore. > > Just sayin > > -Sean > > > On Monday, December 7, 2015, Chuck McCown < > <javascript:_e(%7B%7D,'cvml','ch...@wbmfg.com');>ch...@wbmfg.com > <javascript:_e(%7B%7D,'cvml','ch...@wbmfg.com');>> wrote: > >> On the assault rifle issue, are we just arguing about magazine size? >> >> Or does it need a handle on top and a pistol grip? >> How does a BAR differ from an AR? Assuming they are the same caliber. >> BAR is OK because it only shoots deer, but the AR is for shooting people? >> Wood stock good, green metal and plastic bad? >> >> Semi automatic deer hunting rifles are OK, right? >> >> Is this a distinction without a difference? >> >> *From:* Sean Heskett >> *Sent:* Monday, December 07, 2015 3:31 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy >> and why >> >> i have a Glock23 .40cal works great but it's not quite a "conceal carry" >> size. I have it (unloaded and trigger locked) in my survival pack that >> stays in my airplane incase of an emergency landing in the back country ;-) >> >> i'm also a Progressive Libtard (registered independent) that thinks we >> should ban assault rifles and large magazines just as we have banned hand >> grenades, bombs, rocket launchers and other military style/grade weapons. >> I've had my Hunter's safety card since I was 12 and I also went to high >> school next to Columbine in CO. My younger sister had friends who died in >> the attack. >> >> 2 cents. >> >> -Sean >> >> >> On Mon, Dec 7, 2015 at 3:01 PM, James Howard <ja...@litewire.net >> <javascript:_e(%7B%7D,'cvml','ja...@litewire.net');>> wrote: >> >>> It wasn’t just the backstrap that bothered me. Mostly the diamond >>> pattern just didn’t feel good in my hands. I just did a bit of looking now >>> though and it looks like there are some options for fixing that. I might >>> have to look into them again. I really like the Sig P938 so far though. >>> >>> >>> >>> I missed your comment about Glock fanboys. Shocking we haven’t had any >>> so far but the thread devolved into politics from a simple question of what >>> brand/model of pistol we like. For the record, I’ve yet to meet a Glock >>> that I’d want to own. >>> >>> >>> >>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Reynolds >>> *Sent:* Monday, December 07, 2015 11:08 AM >>> *To:* af@afmug.com <javascript:_e(%7B%7D,'cvml','af@afmug.com');> >>> *Subject:* Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy >>> and why >>> >>> >>> >>> XDS has replaceable grip backstraps. >>> >>> >>> >>> On Mon, Dec 7, 2015 at 11:04 AM, James Howard <ja...@litewire.net >>> <javascript:_e(%7B%7D,'cvml','ja...@litewire.net');>> wrote: >>> >>> Sig P938 is 9mm and almost exactly the same size as a P238. I’ve got >>> the SAS model (anti snag). I’ve also got a S M Shield in 9mm and have >>> looked at the Springfield XDS many times. I just can’t get over the fact >>> that I don’t like the grips on the XDS. Prime reason to go with the XDS is >>> that you can get it in 45ACP. There are a lot of cheaper brands out there >&
Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy and why
But if you look it that list carefully, it includes one and two victim crimes,
which constitute the majority of the shootings in the U.S. Those crimes
arguably would have happened even without access to a gun. People have been
killing each other since the beginning of time. If you want to kill someone, a
gun is only one tool among many. People in the UK somehow still manage to kill
each other (some with firearms) even with very restrictive gun controls in
place.
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
- Original Message -
From: "Bill Prince" <part15...@gmail.com>
To: af@afmug.com
Sent: Tuesday, December 8, 2015 9:45:10 AM
Subject: Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy and why
I think the original statement is true. Looking down the list, it goes:
US
Scotland
Australia
US
Yemen
US
US
US
US
US
US
US
US
US
Canada
US
US
US ...
bp
<part15sbs{at}gmail{dot}com>
On 12/8/2015 7:07 AM, Christopher Tyler wrote:
> There should be a 'just' in there... :)
>
Re: [AFMUG] DC-DC Converter
How about something like this? Mouser Part #: 580-UEI25-120D48PM-C Manufacturer Part #: UEI25-120-D48PM-C Manufacturers: Murata Isolated DC/DC Converters 48V 12Vout 2.1A SMT 25.2W Pos. Polarity 1: $24.75 5: $24.55 10: $24.36 25: $24.02 50: $23.32 100: $21.82 http://www.mouser.com/ProductDetail/Murata/UEI25-120-D48PM-C/?qs=%2fha2pyFadujHAANryBiTU1Kx6cyEFYUwTdUO3HdDoRHRHSVzFxugPaeR%252bw5%2fRC60 -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Chuck McCown" <ch...@wbmfg.com> To: af@afmug.com Sent: Monday, November 30, 2015 2:50:48 PM Subject: Re: [AFMUG] DC-DC Converter Need 48 in, 12 out. From: SmarterBroadband Sent: Monday, November 30, 2015 1:48 PM To: af@afmug.com Subject: Re: [AFMUG] DC-DC Converter How about $11. We have used these to power radios off batteries for installers. They are adjustable - we set them 48v out on 16.2v battery packs. http://www.amazon.com/DROK-Converter-Transformer-Regulator-Inverter/dp/B00BZR9PBW Adam From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Monday, November 30, 2015 12:38 PM To: af@afmug.com Subject: [AFMUG] DC-DC Converter Looking for the smallest cheapest 12 volt to 48 volt unit that will do 20 watts. Digi-Key has some but they are not cheap. Looking for something in the $20 range.
Re: [AFMUG] New York Attorney General Probes Broadband Speeds - WSJ
Wow "The office requested detailed information from each of the companies on their network management and advertising practices, including copies of all broadband customer complaints related to discrepancies between actual and advertised speeds and all “interconnection” agreements, formal and informal, that the companies have struck with third parties." -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Jaime Solorza" <losguyswirel...@gmail.com> To: "Animal Farm" <af@afmug.com> Sent: Monday, October 26, 2015 10:06:22 AM Subject: [AFMUG] New York Attorney General Probes Broadband Speeds - WSJ http://www.wsj.com/articles/new-york-attorney-general-probes-broadband-speeds-1445870078 Jaime Solorza
Re: [AFMUG] larger SyncInjector?
Did you look at the SyncBox12. No Site Monitor but used in conjunction with a Netonix and... Shazam. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Ken Hohhof" <af...@kwisp.com> To: af@afmug.com Sent: Saturday, October 24, 2015 11:58:45 AM Subject: Re: [AFMUG] larger SyncInjector? 12 ports would be nice From: Mathew Howard Sent: Saturday, October 24, 2015 11:47 AM To: af Subject: Re: [AFMUG] larger SyncInjector? If I remember correctly, it's going to be a 12 port. I think it would be DIN rail... or maybe both? On Sat, Oct 24, 2015 at 11:42 AM, Paul McCall <pa...@pdmnet.net> wrote: I saw a mock unit of a 12 port S.I. at A.F in Feb. -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof Sent: Saturday, October 24, 2015 12:41 PM To: af@afmug.com Subject: [AFMUG] larger SyncInjector? I was not at Wispapalooza, but do I remember discussion awhile back of a larger SyncInjector - like maybe 8 ports in one unit? Or am I dreaming? I don't see anything on the Packetflux website. Does anyone know if this is indeed on the roadmap, and if so, how far down the road? And would this be DIN rail or rackmount?
Re: [AFMUG] OT Guns etc
FOOD FIGHT -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "That One Guy /sarcasm" <thatoneguyst...@gmail.com> To: af@afmug.com Sent: Monday, October 12, 2015 12:01:01 PM Subject: Re: [AFMUG] OT Guns etc I like arguments, heated ones are the best, but this topic has the potential to derail what has always been a very good forum for this industry. May I recommend it be closed before somebody gets their panties in a bunch and this joint ends up like a dslreports forum? On Mon, Oct 12, 2015 at 11:50 AM, Patrick Leary <patrick.le...@telrad.com> wrote: > ++ 1000 > > Patrick Leary > > > Patrick Leary > Telrad > On Oct 12, 2015 11:53 AM, Ken Hohhof <af...@kwisp.com> wrote: > Everyone wants to elect a President based on ideology (or likeability), > ignoring that the primary job is to run the executive branch. Eisenhower > was probably the last POTUS who came to the job with credentials for > effectively running a giant organization. Not saying someone can’t grow to > fill the job, look at Reagan and JFK. But seriously, Ben Carson? > > I see the same mistake in the current contest to see what poor schmuck > gets to be Speaker of the House. They want to make it about ideology, and > yes it’s about getting the ideology of the majority caucus into > legislation, but the Speaker should be a get-stuff-done type, not an > ideologue. People still remember Sam Rayburn and Tip O’Neill. Hey, they > could bring Newt Gingrich or Denny Hastert out of retirement. Looks like > Hastert will avoid jail time, and he could probably use the money after > paying all that hush money. > > > *From:* Patrick Leary <patrick.le...@telrad.com> > *Sent:* Monday, October 12, 2015 10:22 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] OT Guns etc > > Your vision of Reagan is of a cartoon character, devoid of reality, > factually ignorant, and it vastly insults his memory. Were Reagan president > today, you'd be calling him a "libtard." You are clearly under 40 years old. > > Patrick Leary > Telrad > On Oct 11, 2015 5:47 PM, Philip Rankin <wireless...@gmail.com> wrote: > Nixon was conservative, but with him trying to cover up his crooked > tail, we never saw much of anything from him. He was truly ineffective. > Ford and Bush?? Hahaha. Not conservative RINO. Reagan, a different > story. He wasn't perfect, but in his heart he held conservatism high. > There is only one way to preside and that is to work with the other side > some. That's when he had to give up his far right position some Nixon is > the only conservative that had any bearing on this country in the last 50 > years. I should say conservative bearing! > > On Sun, Oct 11, 2015 at 4:29 PM, Josh Luthman <j...@imaginenetworksllc.com > > wrote: > >> Nixon Ford Reagan Bush... >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Sun, Oct 11, 2015 at 4:55 PM, Philip Rankin <wireless...@gmail.com> >> wrote: >> >>> Yes, one. >>> >>> >>> On Sun, Oct 11, 2015 at 3:53 PM, Josh Luthman < >>> j...@imaginenetworksllc.com> wrote: >>> >>>> You know we've had conservative politicians and presidents in the last >>>> 50 years right? >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> On Oct 11, 2015 3:52 PM, "Philip Rankin" <wireless...@gmail.com> wrote: >>>> >>>>> Since many of you are calling me rude, how about we just reverse that >>>>> logic??? How about all of the damage the liberal logic has done to this >>>>> country in the past say 50 years Is that not rude? You know, >>>>> actually >>>>> it's so far beyond rude, that we can't measure it anymore. Start with the >>>>> debt, the credit ratings of the country, the backdoor payoff deals, the >>>>> stupidity of laws that cover laws that should not have ever been written >>>>> in >>>>> the first place. Or, the stupid recent healthcare law that the majority >>>>> of >>>>> the population don't want because we were lied to about it. And then the >>>>> RINOs bailing out their favorite companies after they got their kickbacks? >>>>> And this isn't even the tip of the iceberg. It's all liberal stupid
Re: [AFMUG] OT Campus Shootings
I think the largest problem people have with licenses and registration is that the government then has a list of everyone who legally owns a firearm and --could-- the use that list to target individuals at some later date. Also there is the problem of the government releasing that information willingly or unwillingly not to the public so that criminals then have a list of people who do and do not have firearms. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Adam Moffett" <dmmoff...@gmail.com> To: af@afmug.com Sent: Monday, October 12, 2015 11:45:57 AM Subject: Re: [AFMUG] OT Campus Shootings Your points are largely good ones. Requiring a license for guns as we do for handling dangerous chemicals, driving cars, flying aircraft, etc would not impede on your ability to defend yourself from wildlife, or criminals, or even to participate in a militia. and it would not be a completely crazy thing. Presumably, if you see a need to have a gun, then you'd get a license. With that said, I disagree with all current gun control legislation for one reason: The constitution says my right to keep and bear arms shall not be infringed. They get around it with tax laws and interstate commerce regulations. If it's that easy to circumvent the constitution then why do we have it? Who says they couldn't put a tax on public gatherings or regulate the interstate distribution of media? Thereby circumventing the first amendment without having to challenge it directly. IMO any gun control laws that aren't preceded by a constitutional amendment should never have happened and the supreme court should not have upheld them. On 10/12/2015 11:39 AM, Dan Petermann wrote: > Its is the person, not the gun. > > Any number of household chemicals can be used to maim or kill. There are > gasses, poisons and explosives that can be manufactured from legal to > purchase chemicals. > > The gun gets singled out because it it easy to conceal and has that > �scary� factor. > > Should we outlaw baseball bats? How about knives? Maybe only "assault > knives�, you know, those scary looking Rambo ones. > > Cars are a highly lethal weapon. I could kill more people with a car that I > ever could hope to with an assault weapon. Football game and an monster truck > anyone? > > Any farmer has the capability to build a bomb like Timothy McVeigh, outlaw > farmers? > > Any mentally ill person (and lets face it, anyone bent on murder is mentally > ill), will find a way. This is why I have a problem with the insanity > defense. You are not guilty by reason of insanity, you are guilty, but insane. > > Almost any object is a potential weapon. > > I live in an area where there is dangerous wildlife. Am I to be disarmed so I > am unable to defend myself? There are grizzly bears, black bears, mountain > lions, bob cats, wolves, & coyotes, all have been spotted fairly close to my > house. So, because some people abuse a right, I am to give up mine? > > Should we abandon the 1st amendment also because someone might yell fire in a > crowded theater? > > Lets control all speech because some people might misuse it. > > Hmm, lets see, religion is a major contributor to problems of all kinds, lets > let the state decide what religion we can be a member of. > > Other people call for the whole sale slaughter of others, so lets let the > government decide what speech is allowable. > > I get really offended by what is written in the press so lets control that > also. > > Large groups of people assembled for a specific purpose frightens me so lets > outlaw that too. > > How about the third amendment? Soldiers shouldn�t have to live in barracks, > lets quarter them in your house. > > 4th? That pesky need for warrants, think of how many criminals could be put > away if it wasn�t for the 4th amendment! > > I would go on but I think you get the point. Just because someone might get > injured, or afraid, or offended, or even have good intentions, it doesn�t > give them a right to take away my rights. > > The right to defend one�s self is the most basic right of all. > > > On Oct 9, 2015, at 10:21 PM, Stefan Englhardt <s...@genias.net> wrote: > >> Looking at this with a foreign view I can't understand this "gun love" in >> US. It is not all about the criminals or idiots. Just look at the statistics >> for accidents with weapons. The only way to save lifes is to be very >> restrictive. If someone wants to shoot he can go to a shooting club and >> leave the weapon there. It is not freedom to have a gun at home. It is silly >> esp. with kids around. >> You can't avoid killing with banning weapons but you can reduce it. If I >> need a weapon I call for police or security.
Re: [AFMUG] And you thought gamers were grumpy about Latency Before
PlayStation actually does this in two ways right now, share play and online game rentals. They both stream the video to you and the controls back to the server. Whereas share play is a P2P connection between two private PlayStation's, the rentals are connecting to Sony's servers. I've done share play and it works well even in reaction intensive games like Call of Duty. In my opinion I feel the prices for online rentals are too high, so I don't participate in that racket. They rent by the hour, day, week, etc. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Mathew Howard" <mhoward...@gmail.com> To: "af" <af@afmug.com> Sent: Friday, October 2, 2015 1:01:11 PM Subject: Re: [AFMUG] And you thought gamers were grumpy about Latency Before Yeah, Sony has been doing something similar on the Playstations for awhile now... but I've never heard of anyone actually using it. On Fri, Oct 2, 2015 at 11:39 AM, Christopher Tyler <ch...@totalhighspeed.net > wrote: > PlayStation 4 has been doing this for at least a year already, and I'd > wager that the number of PS4 users on your network vastly outnumbers the > Nvidia Shield users. > > -- > Christopher Tyler > MTCRE/MTCNA/MTCTCE/MTCWE > Total Highspeed Internet Services > 417.851.1107 > > - Original Message - > From: "Nate Burke" <n...@blastcomm.com> > To: "Animal Farm" <af@afmug.com> > Sent: Wednesday, September 30, 2015 4:59:06 PM > Subject: [AFMUG] And you thought gamers were grumpy about Latency Before > > > http://hothardware.com/news/nvidia-launches-geforce-now-game-streaming-service > > No more Pesky Downloading games to your console, use the 'Netflix' of > Video Games... > > "To use GeForce NOW, you�ll need to meet a number of requirements. > First, you�ll need an NVIDIA SHIELD Android TV, SHIELD portable, or > SHIELD tablet (with the latest software updates installed) and a > SHIELD-approved 5GHz router. The latest SHIELD Hub app from the Google > Play store must be installed. And your broadband connection must offer > download speeds of at least 12Mb/s. 20Mb/s is recommended for 720p / 60 > FPS quality, and 50Mb/s is recommended for 1080p / 60 FPS. You must also > have a 60ms or lower ping time to a GeForce NOW server, though 40ms or > lower is recommended. " > > I like how they refer to that as 'Broadband Connection' Sounds more like > DIA to me, since it's continuous sustained traffic. I'm guessing > buffering or caching video games doesn't work well. >
Re: [AFMUG] And you thought gamers were grumpy about Latency Before
PlayStation 4 has been doing this for at least a year already, and I'd wager that the number of PS4 users on your network vastly outnumbers the Nvidia Shield users. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Nate Burke" <n...@blastcomm.com> To: "Animal Farm" <af@afmug.com> Sent: Wednesday, September 30, 2015 4:59:06 PM Subject: [AFMUG] And you thought gamers were grumpy about Latency Before http://hothardware.com/news/nvidia-launches-geforce-now-game-streaming-service No more Pesky Downloading games to your console, use the 'Netflix' of Video Games... "To use GeForce NOW, you�ll need to meet a number of requirements. First, you�ll need an NVIDIA SHIELD Android TV, SHIELD portable, or SHIELD tablet (with the latest software updates installed) and a SHIELD-approved 5GHz router. The latest SHIELD Hub app from the Google Play store must be installed. And your broadband connection must offer download speeds of at least 12Mb/s. 20Mb/s is recommended for 720p / 60 FPS quality, and 50Mb/s is recommended for 1080p / 60 FPS. You must also have a 60ms or lower ping time to a GeForce NOW server, though 40ms or lower is recommended. " I like how they refer to that as 'Broadband Connection' Sounds more like DIA to me, since it's continuous sustained traffic. I'm guessing buffering or caching video games doesn't work well.
Re: [AFMUG] Marketing Question - OT?
Agreed. As long as you mark it as MSRP, most people will understand that price is generally higher than what they will pay a vendor. Especially if ordering in higher quantities. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Tyler Treat" <tyler.tr...@cornbelttech.com> To: af@afmug.com Sent: Tuesday, September 15, 2015 11:30:07 AM Subject: Re: [AFMUG] Marketing Question - OT? I'd prefer ballpark pricing than none at all. ___ Mangled by my iPhone. ___ Tyler Treat Corn Belt Technologies, Inc. tyler.tr...@cornbelttech.com<mailto:tyler.tr...@cornbelttech.com> ___ On Sep 15, 2015, at 11:27 AM, Chuck McCown <ch...@wbmfg.com<mailto:ch...@wbmfg.com>> wrote: The question this morning, is when you go to a website like mine, and you see prices that are List/MSRP with a hint that dealers will give you a discount, is that better or worse than no prices at all? MSRP are inflated a bit, do they scare people away. Would it be better without any prices? I know I often skip places without any prices but I also know that I am pretty bad at extrapolating my experiences into what the "average" customer would do.
Re: [AFMUG] PoE Pinouts
If you have a UBNT power supply handy it's printed which pins are which polarity as do the older style Canopy supplies. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Work" <timothy.pct...@gmail.com> To: af@afmug.com Cc: af@afmug.com Sent: Thursday, September 10, 2015 4:52:46 PM Subject: Re: [AFMUG] PoE Pinouts Just Google it all over the net... Blues and browns are power wires if using M standard I forget what's -+ and for U MY you just reverse it — Sent from Mailbox On Thu, Sep 10, 2015 at 4:13 PM, Gilbert T. Gutierrez, Jr. <mailing-li...@phxinternet.com> wrote: > Does anyone have a list of PoE pinouts for common radio equipment? I had > a spreadsheet that I unfortunatly did not save to my network on my > laptop that had its hard drive fail. Specifically, I am looking for the > pinouts of Cambium 430 gear and SAF PtoP radios. > Gilbert
Re: [AFMUG] PoE Pinouts
UBNT is 4,5(+) 7,8(-) CAMB is 4,5(-) 7,8(+) -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Christopher Tyler" <ch...@totalhighspeed.net> To: af@afmug.com Sent: Thursday, September 10, 2015 4:54:54 PM Subject: Re: [AFMUG] PoE Pinouts If you have a UBNT power supply handy it's printed which pins are which polarity as do the older style Canopy supplies. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Work" <timothy.pct...@gmail.com> To: af@afmug.com Cc: af@afmug.com Sent: Thursday, September 10, 2015 4:52:46 PM Subject: Re: [AFMUG] PoE Pinouts Just Google it all over the net... Blues and browns are power wires if using M standard I forget what's -+ and for U MY you just reverse it — Sent from Mailbox On Thu, Sep 10, 2015 at 4:13 PM, Gilbert T. Gutierrez, Jr. <mailing-li...@phxinternet.com> wrote: > Does anyone have a list of PoE pinouts for common radio equipment? I had > a spreadsheet that I unfortunatly did not save to my network on my > laptop that had its hard drive fail. Specifically, I am looking for the > pinouts of Cambium 430 gear and SAF PtoP radios. > Gilbert
Re: [AFMUG] What to do when the Internet is down...
Scariest words ever spoken or heard... Hi, I'm from the Govt and I'm here to help. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: David dmilho...@wletc.com To: af@afmug.com Sent: Monday, August 17, 2015 8:13:54 AM Subject: Re: [AFMUG] What to do when the Internet is down... OMG! Really.. I think that a knock on the front door from a guy in a black jacket claiming to fix their internet should be in order :) On 08/16/2015 02:52 PM, Steve D wrote: We had a bad situation this week where wildfire took out our upstream's fiber in one valley which we relay wirelessly over to another valley. We had calls from people angry that we weren't driving through the roadblocks to fix it. :( -Steve D On Sun, Aug 16, 2015 at 12:30 PM, Ken Hohhof af...@kwisp.com mailto:af...@kwisp.com wrote: The last row are me during a thunderstorm. *From:* D. Ryan Spott mailto:rsp...@ngc457.com *Sent:* Sunday, August 16, 2015 2:07 PM *To:* af@afmug.com mailto:af@afmug.com ; memb...@wispa.org mailto:memb...@wispa.org *Subject:* [AFMUG] What to do when the Internet is down... Normally these comics are just humor. The 'complain to your local congressman' is what got me to send it to this group. ryan -- D. Ryan Spott | NGC457, llc broadband | telco | colo | communities PO Box 1734 Sultan, WA 98294 425-939-0047 tel:425-939-0047
Re: [AFMUG] What to do when the Internet is down...
Max range is about 45ft, effective range is 15ft. What good is that against a drone? -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Ken Hohhof af...@kwisp.com To: af@afmug.com Sent: Monday, August 17, 2015 12:39:42 PM Subject: Re: [AFMUG] What to do when the Internet is down... http://www.thenetgunstore.com/2014/11/20/net-guns-for-drone-defense/ From: Cameron Crum Sent: Monday, August 17, 2015 12:22 PM To: af@afmug.com Subject: Re: [AFMUG] What to do when the Internet is down... Maybe a microwave magnetron attached to a waveguide or directional antenna. On Mon, Aug 17, 2015 at 12:11 PM, Ryan Ray ryan...@gmail.com wrote: http://www.cbc.ca/news/canada/british-columbia/drone-operators-blast-irresponsible-and-selfish-flight-that-grounded-firefighters-1.3193540 On Mon, Aug 17, 2015 at 10:09 AM, Ken Hohhof af...@kwisp.com wrote: Surprising people would mess with firefighters. I remember seeing a VW beetle someone parked in front of a fire hydrant, and there was a house fire. The firefighters bashed out windows on both sides and ran a firehose through his car. No doubt they could have picked it up and moved it, or called police to have it towed, but this was quicker and hopefully taught him a lesson. From: Steve D Sent: Monday, August 17, 2015 11:56 AM To: af Subject: Re: [AFMUG] What to do when the Internet is down... The particular fires are in southern BC along the US/Canada border from Osoyoos over to Rock Creek/Kettle Valley area. We've got a temporary service in place relayed from a neighboring WISP now. It's not a lot, but it's something. Another community north of there is completely in the dark due to the fires to the south... no phone lines, no power, not even cell. Logistically, there's nothing we can do for this community right now either. Reports indicate the power company is setting up a generator. 30 homes were lost in Rock Creek so far, and then there's an effin' idiot flying a drone which has caused the air support for the fire to be grounded yesterday. Now *THERE* is someone I hope the black suits find... -Steve D On Mon, Aug 17, 2015 at 6:30 AM, D. Ryan Spott rsp...@ngc457.com wrote: Where are you at Steve? ryan -- D. Ryan Spott | NGC457, llc broadband | telco | colo | communities PO Box 1734 Sultan, WA 98294 425-939-0047 On Aug 16, 2015, at 12:52, Steve D bigd...@gmail.com wrote: We had a bad situation this week where wildfire took out our upstream's fiber in one valley which we relay wirelessly over to another valley. We had calls from people angry that we weren't driving through the roadblocks to fix it. :( -Steve D On Sun, Aug 16, 2015 at 12:30 PM, Ken Hohhof af...@kwisp.com wrote: The last row are me during a thunderstorm. From: D. Ryan Spott Sent: Sunday, August 16, 2015 2:07 PM To: af@afmug.com ; memb...@wispa.org Subject: [AFMUG] What to do when the Internet is down... Normally these comics are just humor. The 'complain to your local congressman' is what got me to send it to this group. ryan eijjfgai.png -- D. Ryan Spott | NGC457, llc broadband | telco | colo | communities PO Box 1734 Sultan, WA 98294 425-939-0047
Re: [AFMUG] Easy way to copy csv addresses to Earth
Google docs spreadsheet and fusion tables. I think that's what it's called anyway. Drops your spreadsheet tables right into Google maps. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Josh Luthman j...@imaginenetworksllc.com To: af@afmug.com Sent: Friday, August 14, 2015 12:21:45 PM Subject: [AFMUG] Easy way to copy csv addresses to Earth I have a handful of customers on a spreadsheet and I want to see them. Is this easily doable? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Re: [AFMUG] Mounting ePMP poes
Maybe you can convince our good buddy Chuck to create a small plastic wall mount for them, with a way to attach a DIN rail adapter. And clips to hold it in place to make it easy to replace the PoE injector when needed? -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Josh Luthman j...@imaginenetworksllc.com To: af@afmug.com Sent: Thursday, August 13, 2015 11:02:41 AM Subject: Re: [AFMUG] Mounting ePMP poes That would be the POE that needs replaced every year for sure =P Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Aug 13, 2015 at 12:00 PM, Christopher Tyler ch...@totalhighspeed.net wrote: Glue a DIN rail mount to the back of the PoE maybe? Use some good strong glue, Elmers white probably won't cut it :) -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Andy Trimmell atrimm...@precisionds.com To: af@afmug.com Sent: Thursday, August 13, 2015 10:39:45 AM Subject: Re: [AFMUG] Mounting ePMP poes for toughswitch mounts I buy the Maxxwave wallmount from baltic. From: Af [mailto:af-boun...@afmug.com] On Behalf Of David Sent: Thursday, August 13, 2015 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] Mounting ePMP poes Josh, Here is what we did using an enclosure and some velcro straps On 08/12/2015 08:55 PM, Josh Luthman wrote: NOTHING to work with :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 12, 2015 9:50 PM, Adam Moffett dmmoff...@gmail.com wrote: PVC pipe hanging strap. It's not less embarrassing than zip ties though. I don't have one of those PoE's handyare there no keyholes on the back? To all equipment vendors: It costs zero dollars extra to put keyholes in the back of your housing. Ok, it's not free to retool after you've already done it wrong, but honestly is there any reason NOT to put them in? Since it is the only Cambium POE option...does anyone have any idea how to mount them into place? My only idea is a cable tie and zip ties which is embarrassing. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Re: [AFMUG] Mounting ePMP poes
Glue a DIN rail mount to the back of the PoE maybe? Use some good strong glue, Elmers white probably won't cut it :) -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Andy Trimmell atrimm...@precisionds.com To: af@afmug.com Sent: Thursday, August 13, 2015 10:39:45 AM Subject: Re: [AFMUG] Mounting ePMP poes for toughswitch mounts I buy the Maxxwave wallmount from baltic. From: Af [mailto:af-boun...@afmug.com] On Behalf Of David Sent: Thursday, August 13, 2015 8:41 AM To: af@afmug.com Subject: Re: [AFMUG] Mounting ePMP poes Josh, Here is what we did using an enclosure and some velcro straps On 08/12/2015 08:55 PM, Josh Luthman wrote: NOTHING to work with :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 12, 2015 9:50 PM, Adam Moffett dmmoff...@gmail.com wrote: PVC pipe hanging strap. It's not less embarrassing than zip ties though. I don't have one of those PoE's handyare there no keyholes on the back? To all equipment vendors: It costs zero dollars extra to put keyholes in the back of your housing. Ok, it's not free to retool after you've already done it wrong, but honestly is there any reason NOT to put them in? Since it is the only Cambium POE option...does anyone have any idea how to mount them into place? My only idea is a cable tie and zip ties which is embarrassing. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Re: [AFMUG] I forgot to ask, do you need paper?
That pole is really only about 4 ft off the ground. It's just the cameras perspective that makes it look like it's taller. Or at least that is what you tell OSHA when they ask. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Forrest Christian (List Account) li...@packetflux.com To: af af@afmug.com Sent: Wednesday, July 8, 2015 11:59:46 PM Subject: Re: [AFMUG] I forgot to ask, do you need paper? Where are the osha-mandated straps? And hardhat probably. Don't forget the two on the ground supervisors each ready to rescue you at a moment's notice. Or at least look at each other with a what do we do now? look. On Wed, Jul 8, 2015 at 7:01 PM, ch...@wbmfg.com wrote: That is the employee restroom! *From:* TJ Trout t...@voltbb.com *Sent:* Wednesday, July 8, 2015 7:00 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] I forgot to ask, do you need paper? I like how you custom made a seat for the 30 seconds you were up on the pole! On Wed, Jul 8, 2015 at 5:57 PM, ch...@wbmfg.com wrote: Typically we are at Wispapalloza. Frequently sharing a gooth with Last Mile Gear/Cascade Networks. Jason Petrillo is our booth babe. Trying to get him into a bikini this year!!! And of course, AnimalFarm is THE premier show for all wispdom. See www.amfug.com We don’t have next years details up there yet. *From:* Erich Kaiser er...@northcentraltower.com *Sent:* Wednesday, July 8, 2015 6:53 PM *To:* Chuck McCown ch...@wbmfg.com *Subject:* Re: I forgot to ask, do you need paper? LOL, Chuck we have never met but this is some funny stuff! Are you going to WISPAPoolza or? Erich Kaiser North Central Tower er...@northcentraltower.com Office: 630-621-4804 Cell: 630-777-9291 On Wed, Jul 8, 2015 at 7:50 PM, Chuck McCown ch...@wbmfg.com wrote: Do you need paper! Forgot to ask if you want a real paper catalog. If so, send the request t...@wbmfg.com Finally got the catalog finished. Forgot to ask: Do you need paper? Chuck McCown says Hi!We have added a bunch of new tower mounting product to allow you to mount almost anything to any tower or pole. And we have a* brand new, tree consuming, oil industry ink using real old-fashioned paper catalog coming out too. * Please check out the internet catalog: http://bit.ly/1eYzD9V http://wbmfg.us11.list-manage.com/track/click?u=98c1d7a210acd35707b9ba4d7id=69c635d077e=b99f2cd7bb If you want us to* MAIL* as in USPS stamps that I may or may not personally lick providing you a DNA physically mail you a copy, please don't be bashful in asking. Send a note to: t...@wbmfg.com and ask for this wonderful smelling document. It has more than one use too! Check the photo above!!! Thanks for your kindness in reading this spammy type of email. please forgive me. Kind regards, Chuck McCown WB Manufactureing AKA McCown Technology Corporation *Copyright © 2015 *|McCown Technology Corporation|*, All rights reserved.* *Our mailing address is:* www.afmug.com http://wbmfg.us11.list-manage1.com/track/click?u=98c1d7a210acd35707b9ba4d7id=aebc28549ae=b99f2cd7bb unsubscribe from this list http://wbmfg.us11.list-manage.com/unsubscribe?u=98c1d7a210acd35707b9ba4d7id=ed80c591e6e=b99f2cd7bbc=4502b3af3e update subscription preferences http://wbmfg.us11.list-manage.com/profile?u=98c1d7a210acd35707b9ba4d7id=ed80c591e6e=b99f2cd7bb This email was sent to er...@northcentraltower.com *why did I get this?* http://wbmfg.us11.list-manage.com/about?u=98c1d7a210acd35707b9ba4d7id=ed80c591e6e=b99f2cd7bbc=4502b3af3e unsubscribe from this list http://wbmfg.us11.list-manage.com/unsubscribe?u=98c1d7a210acd35707b9ba4d7id=ed80c591e6e=b99f2cd7bbc=4502b3af3e update subscription preferences http://wbmfg.us11.list-manage.com/profile?u=98c1d7a210acd35707b9ba4d7id=ed80c591e6e=b99f2cd7bb McCown Technology Corporation · 8400 North SR 36 · Lake Point, UT 84074 · USA [image: Email Marketing Powered by MailChimp] http://www.mailchimp.com/monkey-rewards/?utm_source=freemium_newsletterutm_medium=emailutm_campaign=monkey_rewardsaid=98c1d7a210acd35707b9ba4d7afl=1 -- *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 forre...@imach.com | http://www.packetflux.com http://www.linkedin.com/in/fwchristian http://facebook.com/packetflux http://twitter.com/@packetflux
Re: [AFMUG] 3 days to Internet crash?
I think (sometimes) therefor I am? -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Cameron Crum cc...@wispmon.com To: af@afmug.com Sent: Monday, June 29, 2015 10:53:12 AM Subject: Re: [AFMUG] 3 days to Internet crash? The real question is, did we ever exist at all? On Mon, Jun 29, 2015 at 10:48 AM, Mathew Howard mhoward...@gmail.com wrote: If we do cease to exist, will we notice? On Mon, Jun 29, 2015 at 10:43 AM, Chuck McCown ch...@wbmfg.com wrote: Do we cease to exist during that interval? *From:* Ken Hohhof af...@kwisp.com *Sent:* Monday, June 29, 2015 9:35 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] 3 days to Internet crash? Apparently there are leap second boffins who are fiddling with the fabric of time, markets are spooked, we’re all gonna die. [image: leap_second_boffins_fabric_of_time_markets_spooked_all_gonna_die] *From:* That One Guy /sarcasm thatoneguyst...@gmail.com *Sent:* Monday, June 29, 2015 10:28 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] 3 days to Internet crash? I bet somebody somewhere has some program sitting, waiting to fire off millions of transactions in that one second to do something evil and break the space tiem continuum but there is probably some way to utilize that second to do something with the stock market On Sun, Jun 28, 2015 at 7:19 PM, Trey Scarborough t...@3dsc.co wrote: The problem really isn't things like servers crashing, but more so stuff like banking and credit card processing anything that requires an accurate time stamp to be processed. On 06/28/2015 11:56 AM, Glen Waldrop wrote: I'm failing to see where this is a big deal. Synchronize with an NTP server, add a second to the NTP server. Sit back, have a pint and wait for this whole thing to blow over. - Original Message - From: Ken Hohhof af...@kwisp.com To: af@afmug.com Sent: Saturday, June 27, 2015 7:38 PM Subject: [AFMUG] 3 days to Internet crash? Oh no, another leap second. Will it mess up the Internet like in 2012? http://time.com/3666522/leap-second/ -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
Re: [AFMUG] Mikrotik Powerbox
I heard they were somewhere on the the ocean. Not sure which one though (Pacific or Atlantic). -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Mathew Howard mhoward...@gmail.com To: af af@afmug.com Sent: Wednesday, June 17, 2015 3:16:58 PM Subject: Re: [AFMUG] Mikrotik Powerbox I don't think they're shipping yet. We got a few of the first ones, but they appear to have discontinued those and replaced them with a new version - which doesn't appear to be shipping yet. On Wed, Jun 17, 2015 at 3:12 PM, Jason McKemie j.mcke...@veloxinetbroadband.com wrote: Anyone know if these are available, and if so who has stock? Thanks. Jason
[AFMUG] Google contact?
Does anyone have an email contact at Google that they are willing to pass along? All of our apps for ISP accounts were disabled last night at about 8-9PM without notice. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107
Re: [AFMUG] Google contact?
Yeah I aware of that :) But there was no communication from Google about the grandfathered Apps for ISP which was not handled by Virtacore. The domains that were handled by Virtacore do have to be migrated but that migration doesn't happen until July 9th for us. So this is a little early for that. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Mike Hammett af...@ics-il.net To: af@afmug.com Sent: Wednesday, June 17, 2015 8:29:24 AM Subject: Re: [AFMUG] Google contact? It has been discussed here or on WISPA probably once a month for the past year. *shrugs* - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com - Original Message - From: Christopher Tyler ch...@totalhighspeed.net To: af@afmug.com Sent: Wednesday, June 17, 2015 8:24:35 AM Subject: Re: [AFMUG] Google contact? Maybe, but there was no official communication about it being shut down. No email to the admin account or anything. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Mike Hammett af...@ics-il.net To: af@afmug.com Sent: Wednesday, June 17, 2015 8:22:38 AM Subject: Re: [AFMUG] Google contact? Wasn't that program being shut down? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com - Original Message - From: Christopher Tyler ch...@totalhighspeed.net To: af@afmug.com Sent: Wednesday, June 17, 2015 8:14:57 AM Subject: [AFMUG] Google contact? Does anyone have an email contact at Google that they are willing to pass along? All of our apps for ISP accounts were disabled last night at about 8-9PM without notice. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107
Re: [AFMUG] Google contact?
Maybe, but there was no official communication about it being shut down. No email to the admin account or anything. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Mike Hammett af...@ics-il.net To: af@afmug.com Sent: Wednesday, June 17, 2015 8:22:38 AM Subject: Re: [AFMUG] Google contact? Wasn't that program being shut down? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com - Original Message - From: Christopher Tyler ch...@totalhighspeed.net To: af@afmug.com Sent: Wednesday, June 17, 2015 8:14:57 AM Subject: [AFMUG] Google contact? Does anyone have an email contact at Google that they are willing to pass along? All of our apps for ISP accounts were disabled last night at about 8-9PM without notice. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107
Re: [AFMUG] SkyDog alternative
I would also be interested in hearing about it. I didn't see the original message so I can't reply off list as I don't have your email address :) -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Sterling Jacobson sterl...@avative.net To: af@afmug.com Sent: Wednesday, June 10, 2015 10:18:38 PM Subject: Re: [AFMUG] SkyDog alternative Oh definitely, I really love Skydog and am dreading the day it turns off (no thanks to Comcast for killing it). I’ll email you. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Harold Bledsoe Sent: Tuesday, June 9, 2015 5:07 PM To: af Subject: [AFMUG] SkyDog alternative Hi folks, For those of you who remember SkyDog, I have an (better) alternative that is operator focused and looking for beta customers. Hit me offlist and I can get you connected. I saw the demo last week and was very impressed. Thanks, -Hal -- Harold Bledsoe
Re: [AFMUG] Managed Industrial PoE Switch with SFP
We use Antaira and have not had any abnormal issues. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Gino Villarini g...@aeronetpr.com To: af@afmug.com Sent: Monday, May 11, 2015 10:39:57 AM Subject: Re: [AFMUG] Managed Industrial PoE Switch with SFP Planet On 5/11/15, 11:25 AM, Rory McCann rmm.li...@gmail.com wrote: I'm looking for a hardened, managed, PoE switch with 1Gig SFP. It's going to be installed in an unprotected, unconditioned cabinet, so temps will be inconsistent (90F+ summer, -10F or colder winter). Was looking at the MOXA EDS-P510A-8PoE Series, however at the $1700+ price point I was hoping to find something a little cheaper. I have limited space, so rack mount is out of the question. Will be running a couple of IP cameras and a Serial-to-IP converter for a ticket printer. Do you guys have any recommendations? -- Rory McCann MKAP Technology Solutions Web: www.mkap.net
Re: [AFMUG] F*$%^% Microsoft!!!
https://www.youtube.com/watch?v=Zu0l-Ac7fTU -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Jon Bruce jbruce-af...@ptpbroadband.com To: af@afmug.com Sent: Tuesday, April 28, 2015 11:55:28 AM Subject: Re: [AFMUG] F*$%^% Microsoft!!! Damn them and their free software. On 4/28/2015 12:32 PM, Paul Stewart wrote: +1 yup.. *From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Luthman *Sent:* Tuesday, April 28, 2015 11:40 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] F*$%^% Microsoft!!! Microsoft. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Apr 28, 2015 at 11:39 AM, Ty Featherling tyfeatherl...@gmail.com mailto:tyfeatherl...@gmail.com wrote: It is insane to even have this problem, let alone there be such as stupid workaround to the stupid problem. Why not just make it that easy to begin with? -Ty On Tue, Apr 28, 2015 at 10:36 AM, Josh Luthman j...@imaginenetworksllc.com mailto:j...@imaginenetworksllc.com wrote: You're very welcome. Just remember to type redist after your search and you'll save your sanity. Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Apr 28, 2015 at 11:32 AM, Ty Featherling tyfeatherl...@gmail.com mailto:tyfeatherl...@gmail.com wrote: GOD BLESS YOU BROTHER! That worked fine. Had to turn off pop-up blocking still even though chrome never told me it was blocking a pop-up but I got it downloading now. Thanks Josh. -Ty On Tue, Apr 28, 2015 at 10:17 AM, Josh Luthman j...@imaginenetworksllc.com mailto:j...@imaginenetworksllc.com wrote: Just put redistributable behind your search https://www.microsoft.com/en-us/download/details.aspx?id=42299 Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Apr 28, 2015 at 11:05 AM, Ty Featherling tyfeatherl...@gmail.com mailto:tyfeatherl...@gmail.com wrote: I have been trying to download Microsoft SQL Server Management Studio 2014 Express, which is FREE SOFTWARE for 2 whole hours now. No it is not a slow download.. well it might be but I have no idea since I have yet to even manage to start any downloads. the MSDN site is just leading me in circles. Click here to register and download, sign in to you Live.com account, enter your name and email address, select language, select which version you want to download, uncheck the i want spam options, click Contine to download.. Thanks for downloading! Here are some resources! F%$ you MS!! This is ridiculous. Anyone have the installer for SSMS 2014 or even for the full SQL Server 2014 Express? I even tried to find a torrent but couldn't. -Ty
Re: [AFMUG] our shiny new website
Something to keep on your radar.. Free SSL certs starting Mid-2105.. https://letsencrypt.org/ -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Ty Featherling tyfeatherl...@gmail.com To: af@afmug.com Sent: Friday, April 10, 2015 3:13:41 PM Subject: Re: [AFMUG] our shiny new website Thanks Paul we are currently working on getting real certs and I will recommend going SSL only with redirect. -Ty On Fri, Apr 10, 2015 at 3:05 PM, Paul Stewart p...@paulstewart.org wrote: Not bad at all… Wordpress powered (which I am a fan of if done right) Minor suggestion .. SSL is enabled on your site but with self signed cert. If you’re serious about SEO, then force customers to use only SSL version (through redirect) and put a good cert in place. Google rankings are effected by having SSL only versions of websites J When you setup SSL, test it against https://www.ssllabs.com/ssltest/ and keep working at it until you get a grade “A” Cheers! Paul *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Ty Featherling *Sent:* Friday, April 10, 2015 3:23 PM *To:* af@afmug.com *Subject:* [AFMUG] our shiny new website After hiring a new guy for tech support that turns out to be quite savvy at web-design, we turned him loose on our crappy website. We have been live with the new one for about a week and I am very pleased with it. Please check it out and let me know if you see anything of concern. www.zeecon.com -Ty
Re: [AFMUG] our shiny new website
Should say 2015 not 2105.. I won't live that long... :P -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Christopher Tyler ch...@totalhighspeed.net To: af@afmug.com Sent: Friday, April 10, 2015 3:31:42 PM Subject: Re: [AFMUG] our shiny new website Something to keep on your radar.. Free SSL certs starting Mid-2105.. https://letsencrypt.org/ -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: Ty Featherling tyfeatherl...@gmail.com To: af@afmug.com Sent: Friday, April 10, 2015 3:13:41 PM Subject: Re: [AFMUG] our shiny new website Thanks Paul we are currently working on getting real certs and I will recommend going SSL only with redirect. -Ty On Fri, Apr 10, 2015 at 3:05 PM, Paul Stewart p...@paulstewart.org wrote: Not bad at all… Wordpress powered (which I am a fan of if done right) Minor suggestion .. SSL is enabled on your site but with self signed cert. If you’re serious about SEO, then force customers to use only SSL version (through redirect) and put a good cert in place. Google rankings are effected by having SSL only versions of websites J When you setup SSL, test it against https://www.ssllabs.com/ssltest/ and keep working at it until you get a grade “A” Cheers! Paul *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Ty Featherling *Sent:* Friday, April 10, 2015 3:23 PM *To:* af@afmug.com *Subject:* [AFMUG] our shiny new website After hiring a new guy for tech support that turns out to be quite savvy at web-design, we turned him loose on our crappy website. We have been live with the new one for about a week and I am very pleased with it. Please check it out and let me know if you see anything of concern. www.zeecon.com -Ty
Re: [AFMUG] Low Voltage Disconnect
Just tried that and the POT still does nothing. Now it just sits at 27.6v constantly. -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: George Skorup (Cyber Broadcasting) geo...@cbcast.com To: af@afmug.com Sent: Thursday, April 9, 2015 9:40:04 AM Subject: Re: [AFMUG] Low Voltage Disconnect 22-23 volts I think is the bottom of the adjustment range on the TSP power supply. At least you know the remote cable is working because the BCM can shut down the power supply. Try disconnecting the remote cable and adjust the pot on the power supply up to 27.6 volts. Power off, then reconnect the remote cable and power back up. It was quite a while ago, but I think that's the same problem I had on the BCM48. If the PS is turned all the way down, it sorta acts like a limiter, so the BCM can't say hey, I need all your volts! On 4/9/2015 9:29 AM, Christopher Tyler wrote: Looks like I have a bad BCM maybe. I disconnected the battery and the temp sensor and left the remote wire connected. I adjusted the pot on the BCM, and it does nothing at all. The remote wire is definitely connected correctly, if I turn off the BCM it turns off the power supply, turn it back on, and after a few seconds it turns the power supply back on.
