Re: [all-audio] Ascertaining Pitch/Frequency of Different Sounds

[Colin Howard]

Greetings,

I am aware the accepted (concert) pitch of 523.23Hertz is fifth octave c,
some say fifth octave c is 517Hertz, I am also aware fourth octave a is
440Hertz, I guess you can find out other pitches / frequencies off the net
but don't know how or where.

On Fri, 16 Sep 2022 22:41:08 +0100, amongst other things, "Danny Miles"
 wrote:

Hi. I hope everyone is well.

I'm working on music projects at the moment and I need to ascertain
the pitch of notes, either by being notified of that directly or by
being able to obtain information regarding a note's frequency so that
I can convert it using my reference guide. The music is in a file on
my laptop, so I was wondering whether or not I can use GoldWave to
find out this information using Jaws. If not, I'm wondering whether or
not there is any accessible DAW (Reaper, Audacity, etc) that will do
this, or any website where sounds can be uploaded and an automatic
answer regarding the pitch/tone given in return.

By the way, I'm aware of the iPhone app Talking Tuner, but I'm not
confident that it's giving me accurate results (I'm unsure whether
VoiceOver's speech is influencing the results, and I'm also finding
that the phone doesn't always pick up sounds played off of my computer
or through my speakers).

Thanks very much in advance for any advice... I'm looking forward to
hearing from you.

Take care, Danny



On 9/12/22, Howard Traxler  wrote:
> I once thought it was good to change the subject.  Then I was chastised
> for doing that, so I hesitate.
>
> I will get on my knees.
>
> Thank you.
> Howard
>
> On 9/12/2022 3:02 PM, Darran Ross wrote:
>> Howard, could I suggest you change the subject field?
>>
>> - Original Message - From: "Howard Traxler" 
>> To: 
>> Sent: Monday, September 12, 2022 7:00 PM
>> Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I think!
>>
>>
>>> You're right! It went in without a problem. It even set up the input
>>> device the way I wanted. Now I'm having trouble with the mic. Have a
>>> meeting this afternoon and can't get the mic to work.
>>>
>>>
>>> Howard
>>>
>>>
>>> On 9/12/2022 10:49 AM, dennis wrote:
 it should work the same as 5.68.

 On 9/12/2022 10:44 AM, Howard Traxler wrote:
> My new GoldWave installed in the "program files" folder; but the
> older one (5.68) remains in the program files (x86) folder; and
> that's the one that runs from the desktop shortcut. Looks like I'll
> have to remove the old one and point the shortcut to the new one.
> In addition, I'll have to put in my registration codes. Then comes
> the big problem: choosing and setting up a recording device.
>
>
> I'll be back.
>
>
> Howard
>
>
> On 9/12/2022 8:43 AM, dennis wrote:
>> yes it's the same. i for sure think you need to upgrade to latest
>> version. i seam to remember having the same issue until i upgraded
>> too.
>>
>> On 9/12/2022 6:07 AM, Darran Ross wrote:
>>> Thanks Philip, Dennis and John.
>>>
>>> Dennis, I'm using GW 5.70, and I've got Auto Scroll Lock checked
>>> in the View Menu. I'm assuming this is referred to as Follow
>>> Playback Control in new versions? I'm assuming that basically
>>> they're one and the same?
>>>
>>> John, yes, I do have my window maximized. For a brief moment or
>>> too earlier in the week I did think this was the problem, sadly
>>> though not the case.
>>>
>>> Philip, your suggestion isn't a procedure I'm currently used to
>>> using, but I'll start giving it a go and see how it works out.
>>>
>>> When all's said and done, perhaps updating to the latest versions
>>> of GW and JAWS scripts may be the sensible thing to do. If it
>>> continues to happen, it may well be PC through the window time!!
>>>
>>> Please feel free to toss any other suggestions into the mix.
>>>
>>> Darran
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> - Original Message - From: "John Covici"
>>> 
>>> To: 
>>> Sent: Monday, September 12, 2022 3:40 AM
>>> Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I
>>> think!
>>>
>>>
 Is your window maximized, check that as well.

 On Sun, 11 Sep 2022 19:33:42 -0400,
 dennis wrote:
>
> make sure follow playback control l is checked in the view menue.
>
> On 9/11/2022 5:08 PM, Darran Ross wrote:
> > Hi List.
> >
> > Out of nowhere, my version of Goldwave has started acting
> > erratically so far as the start marker is concerned. I'm hoping
> > someone on this list will have a fix, because after a week and
> > more of trying to track this problem down, I'm left defeated!
> >
> > When I finish a recording, my first action is to always hit
> > control a to get the total length of 

Re: [all-audio] GoldWave 6.60 presets.

[Colin Howard]

Greetings,

So, how can I look at what is in the preset?  I don't mean plug-ins, I mean
the presets which can be added / deleted from the presets created for
recording and saving files.

On Wed, 30 Mar 2022 19:56:50 -0400, amongst other things, "tim cumings"
 wrote:

I thought you were referring to plug-in presets like vst's. that is 
where the alt b works.


On 3/30/2022 7:02 PM, Colin Howard wrote:
> Greetings,
>
> No it didn't, maybe I worked wrongly.
>
> I created and populated a .wav file, I then did ctrl+s to save the file, I
> did not name it, I then went to the attributes button and pressed it.  I
> then went to the all chanels, then the all rates and down to a rate, then
> the all bit rates and down to a bit rate, then
> was not sure what to do, went to the presets and down to the standard
> quality, then did alt+b, nothing.
>
> So what is alt+b and when and how do I use it?
>
>
>
> On Wed, 30 Mar 2022 18:26:06 -0400, amongst other things, "tim cumings"
>  wrote:
>
> the alt plus the b key should do the trick.
>
>
> On 3/30/2022 3:45 PM, Colin Howard wrote:
>>  Greetings,
>>
>> Can anybody advise me, in GW V6.60, how I can look at the preset to find out
>> exactly what settings have been employed with a view to edit them?
>>
>> I really want to look at them, change and save the settings back under a new
>> name, I don't want to lose the settings already created.
>>
>> In Total Recorder, to set up a new background recording, one can "clone" an
>> existing setting, the original is not lost.  Is there the same kind of
>> facility in GW V6.60? How do I access such?
>>
>> Thanks.
>>
>>
>>
>> ---
>> This email has been checked for viruses by AVG.
>> https://www.avg.com
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
> 
>
>







-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#4089): https://groups.io/g/all-audio/message/4089
Mute This Topic: https://groups.io/mt/90140153/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] GoldWave 6.60 presets.

[Colin Howard]

Greetings,

No it didn't, maybe I worked wrongly.

I created and populated a .wav file, I then did ctrl+s to save the file, I
did not name it, I then went to the attributes button and pressed it.  I
then went to the all chanels, then the all rates and down to a rate, then
the all bit rates and down to a bit rate, then
was not sure what to do, went to the presets and down to the standard
quality, then did alt+b, nothing.

So what is alt+b and when and how do I use it?



On Wed, 30 Mar 2022 18:26:06 -0400, amongst other things, "tim cumings"
 wrote:

the alt plus the b key should do the trick.


On 3/30/2022 3:45 PM, Colin Howard wrote:
>   Greetings,
>
> Can anybody advise me, in GW V6.60, how I can look at the preset to find out
> exactly what settings have been employed with a view to edit them?
>
> I really want to look at them, change and save the settings back under a new
> name, I don't want to lose the settings already created.
>
> In Total Recorder, to set up a new background recording, one can "clone" an
> existing setting, the original is not lost.  Is there the same kind of
> facility in GW V6.60? How do I access such?
>
> Thanks.
>
>
>
> ---
> This email has been checked for viruses by AVG.
> https://www.avg.com
>
>
>
> 
>
>







-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#4087): https://groups.io/g/all-audio/message/4087
Mute This Topic: https://groups.io/mt/90140153/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[all-audio] GoldWave 6.60 presets.

[Colin Howard]

Greetings,

Can anybody advise me, in GW V6.60, how I can look at the preset to find out
exactly what settings have been employed with a view to edit them?

I really want to look at them, change and save the settings back under a new
name, I don't want to lose the settings already created.

In Total Recorder, to set up a new background recording, one can "clone" an
existing setting, the original is not lost.  Is there the same kind of
facility in GW V6.60? How do I access such?

Thanks.



---
This email has been checked for viruses by AVG.
https://www.avg.com



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#4085): https://groups.io/g/all-audio/message/4085
Mute This Topic: https://groups.io/mt/90140153/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] GoldWave and skip forward and back

[Colin Howard]

Greetings,

Howard, I've been using GW since V4.72, to the best of my knowledge, the
sdcroll lock thing has always been contro with l.

On Mon, 13 Sep 2021 12:00:36 -0500, amongst other things, "Howard Traxler"
 wrote:

Thank you Joe Paton.  The control-l did it.  But in the past, it was one
of those three keys just right of the function keys; can't remember
which one is the scroll lock.  Tried all three and now learnt something new.

Howard


On 9/13/2021 3:19 AM, Joe Paton wrote:
> howard,
> try control-l.
> It used to be refered to as scroll lock on and off.
> now it's something like follow cursor.
> HTH
>
>
>
>
>
>







---
This email has been checked for viruses by AVG.
https://www.avg.com



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3959): https://groups.io/g/all-audio/message/3959
Mute This Topic: https://groups.io/mt/85563478/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] gold wave addon.

[Colin Howard]

Greetings,

You can find them on the GoldWave site, it is a separate section.

On Wed, 21 Apr 2021 03:26:56 -0400, amongst other things, "DAVID"
 wrote:

Hi all.

Can someone help me to find out ware can I find gold wave addons?

Thanks.









---
This email has been checked for viruses by AVG.
https://www.avg.com



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3877): https://groups.io/g/all-audio/message/3877
Mute This Topic: https://groups.io/mt/82255169/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

[Colin Howard]

Greetings,

I am in the UK, my time at writing is 06:46.

I will try and answer you in what may turn out to be a long email.

I assume you are using GW V6.54, I have this the latest, not yet installed
and am also using Windows 7.

Now to have my breakfast!

On Wed, 10 Feb 2021 20:03:39 -0700, amongst other things, "vinny Samarco"
 wrote:


Hi Colin,
I tried doing what you said, but can't get the
cursor positions to change, no matter what I do.
Let me ask a couple of questions. 1, .  What does control G do?2, 
What and were is the play tab?  and 3, I don't understand the zoom in and 
out selections in the view menue.  Depending were you are, and how much time
you have, maybe we can get together on zoom or by phone if you are in Canada
or the U.S.
It's funny, I have been using gw since at least 2009, and have been very
successful with it until now.
Thanks for your suggestions.  I'll keep trying different things.
Vinny-Original Message----- 
From: Colin Howard
Sent: Wednesday, February 10, 2021 2:12 AM
To: all-audio@groups.io
Subject: Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

Greetings,

OK, this is how I would do it but at present still using V5.70.

1. Start playing file.

2. Do Ctrl with g and enter the new cursor position, press enter, you are
now at the position entered so pause file and press left bracket placing
start marker at cursor position, if you want to start at the beginning, your
start marker is already at 0.00, when you start playing the file, so do the
cursor thing for the finish marker which is right bracket.

3. Make sure you have in the play tab the 0.00 edit field set to in my case
0.15, which means whenever I move the cursor or marker, I hear 15 hundredths
of any sound, so now you have your cursor at the end of the sound, adjust
the marker bacvk/forward to ensure you encompas the whole required deletion,
play the end to ensure.

4. Press delete key, job done.

If you need delete partway through a file, use the above to set start and
end markers, adjusting markers using a very small zoom setting I have mine
set to one second, also have play2 set to play selection and play3 set to
play view, in my case mostly one second,

On Tue, 9 Feb 2021 18:07:56 -0700, amongst other things, "vinny Samarco"
 wrote:


Hi,
Yes, I said the wrong thing, I am using the left and right bracket keys.
Thanks,
Vinny
-----Original Message-
From: John Covici
Sent: Tuesday, February 09, 2021 5:45 PM
To: all-audio@groups.io
Subject: Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

It should left and right brackets not parens.

On Tue, 09 Feb 2021 19:34:20 -0500,
vinny Samarco wrote:
>
>
> Hi Tim and Joe and list,
>I really don't know what is going on. The file is one hour
> 57 minutes long. My start marker is at the beginning, I have
> checked ten minutes for each press of the right arrow, I have
> also check follow playback and the scroll lock.  Let's say I want
> to remove the first hour of the file, my start is at the
> beginning.  Now, wherever in the file I press the finish marker,
> I  only here one hour 57 minutes  which is the total length of
> the file. .  Of course I am using the left and right paren as
> start and finish markers.  I am about to see if there is another
> program that would work.  I am using windows 10 with NVDA and all
> the gw aps that are supposed to work with NVDA.  Help, please.
> Vinny
> P. S.  I have used gw for 12 years and have never run into this before.
> Thanks for listening.Original Message- From: Joe Paton
> Sent: Tuesday, February 09, 2021 2:09 PM
> To: all-audio@groups.io
> Subject: Re: [all-audio] Fw: Another Goldwave Question
>
> Hello Vinny,
> try pressing control-l
> this used to be called scroll lock I think, now it is call follow
> playback.
>
> it should be checked in the view menue.
>
> HTH
> Joe
>
>
>
>
>
>
>
>
>


---
This email has been checked for viruses by AVG.
https://www.avg.com












-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3791): https://groups.io/g/all-audio/message/3791
Mute This Topic: https://groups.io/mt/80521066/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

[Colin Howard]

Greetings,

OK, this is how I would do it but at present still using V5.70.

1. Start playing file.

2. Do Ctrl with g and enter the new cursor position, press enter, you are
now at the position entered so pause file and press left bracket placing
start marker at cursor position, if you want to start at the beginning, your
start marker is already at 0.00, when you start playing the file, so do the
cursor thing for the finish marker which is right bracket.

3. Make sure you have in the play tab the 0.00 edit field set to in my case
0.15, which means whenever I move the cursor or marker, I hear 15 hundredths
of any sound, so now you have your cursor at the end of the sound, adjust
the marker bacvk/forward to ensure you encompas the whole required deletion,
play the end to ensure.

4. Press delete key, job done.

If you need delete partway through a file, use the above to set start and
end markers, adjusting markers using a very small zoom setting I have mine
set to one second, also have play2 set to play selection and play3 set to
play view, in my case mostly one second,

On Tue, 9 Feb 2021 18:07:56 -0700, amongst other things, "vinny Samarco"
 wrote:


Hi,
Yes, I said the wrong thing, I am using the left and right bracket keys.
Thanks,
Vinny
-----Original Message-
From: John Covici
Sent: Tuesday, February 09, 2021 5:45 PM
To: all-audio@groups.io
Subject: Re: I am stumppedRe: [all-audio] Fw: Another Goldwave Question

It should left and right brackets not parens.

On Tue, 09 Feb 2021 19:34:20 -0500,
vinny Samarco wrote:
>
>
> Hi Tim and Joe and list,
>I really don't know what is going on. The file is one hour
> 57 minutes long. My start marker is at the beginning, I have
> checked ten minutes for each press of the right arrow, I have
> also check follow playback and the scroll lock.  Let's say I want
> to remove the first hour of the file, my start is at the
> beginning.  Now, wherever in the file I press the finish marker,
> I  only here one hour 57 minutes  which is the total length of
> the file. .  Of course I am using the left and right paren as
> start and finish markers.  I am about to see if there is another
> program that would work.  I am using windows 10 with NVDA and all
> the gw aps that are supposed to work with NVDA.  Help, please.
> Vinny
> P. S.  I have used gw for 12 years and have never run into this before.
> Thanks for listening.Original Message- From: Joe Paton
> Sent: Tuesday, February 09, 2021 2:09 PM
> To: all-audio@groups.io
> Subject: Re: [all-audio] Fw: Another Goldwave Question
>
> Hello Vinny,
> try pressing control-l
> this used to be called scroll lock I think, now it is call follow
> playback.
>
> it should be checked in the view menue.
>
> HTH
> Joe
>
>
>
>
>
>
>
>
>


---
This email has been checked for viruses by AVG.
https://www.avg.com



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3789): https://groups.io/g/all-audio/message/3789
Mute This Topic: https://groups.io/mt/80521066/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] wavepad question?

[Colin Howard]

Simon,

As you've been using WavePad to my knowledge at least a couple of years, I
am really surprised you don't know such a basic function.

I suspect if it is anything like GoldWave, there is a function something
like place marker, in GoldWave, the key stroke to place a marker is left
bracket which when pressed places a start marker at the current cursor
position. the end marker is close bracket which places a marker for the end
of selection at the current cursor
position.  In totalRecorder, there is a similar facility so I suspect if you
read the help or manual, you should find the appropriate descriptions.
Removing / inserting into or from files is one of the most basic and early
things I needed to do with GoldWave.

On Sat, 26 Dec 2020 00:19:54 -, amongst other things, "goshawk on
horseback"  wrote:

I have always found it to be very good, and I am sure that it is just that I
don't know how to tell it what section to remove more than anything else.

Simon


- Original Message -
From: "stewartross via groups.io" 
To: 
Sent: Friday, December 25, 2020 12:07 PM
Subject: Re: [all-audio] wavepad question?


> hi simon
> happy christmas
> i no u can do this with soundforge if that helps
> i haven't tryed wavepad is it good?
> from stewart
> - Original Message -
> From: "goshawk on horseback" 
> To: 
> Sent: Thursday, December 24, 2020 10:55 PM
> Subject: [all-audio] wavepad question?
>
>
> hello all,
> I am looking for the easiest way to take bits out of the middle of an
> audio file with wavepad. it is a tv program that I recorded, and that has
> at least 4 advert breaks that I want to remove.
>
> Simon
>
>
>
>
>
>
>
>
>
>
>







---
This email has been checked for viruses by AVG.
https://www.avg.com



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3749): https://groups.io/g/all-audio/message/3749
Mute This Topic: https://groups.io/mt/79211725/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Problem with Existing GoldWave Licence

[Colin Howard]

Greetings,

Try using GoldWave, think it does all you listed.

http://www.goldwave.com

On Wed, 23 Dec 2020 14:48:28 -, amongst other things, "stewartross via
groups.io"  wrote:

hi all hope your all safe
please can someone recomend an jaws friendly peace of software
where i can do edditing, and that has noise reduction,
click pop filtering,
graphic and parametric equalisor.
all the best from stewart
- Original Message - 
From: "Danny Miles" 
To: 
Sent: Wednesday, December 23, 2020 2:42 PM
Subject: Re: [all-audio] Problem with Existing GoldWave Licence


> Hi Colin.  Thanks very much for that.  You actually did help, as
> pasting in the credentials worked.  Some programs don't like me doing
> that, and GoldWave wasn't showing any characters in the boxes when I
> pasted the info before, so that's why I was trying to type it in.  Not
> sure why it doesn't work with both methods of input, but thanks for
> solving the problem for me.
>
> Take care, Danny
>
>
>
> On 12/23/20, Colin Howard  wrote:
>> Greetings,
>>
>> The last address I have for contacting  GoldWave's author is:
>>
>> chris2...@goldwave.com
>>
>> Sorry, can't help with the licence issue but suggest try pasting in the
>> user
>> name and key from your file, this is what I do if the system asks for my
>> key
>> Etc., to date, since 2010, this has always worked for me.
>>
>> On Wed, 23 Dec 2020 12:24:03 +, amongst other things, "Danny Miles"
>>  wrote:
>>
>> Hi.  I hope everyone is doing well.
>>
>> I've recently installed the latest version of GoldWave and have been
>> using it without issue (apart from the fact that the time announced
>> when a start or end place marker is created is that of the previous
>> marker and not the one being created at the time).  However, I'd
>> incorrectly assumed that it had remembered my previous licence
>> credentials, and so this morning it has asked me to register.  Upon
>> trying to register with my lifetime licence's user ID and licence, I'm
>> receiving a notification stating that one or other of these is
>> incorrect, even though I've typed it straight from the original
>> licence email.  I assume that lifetime means lifetime, but could it be
>> that I need to purchase a new one due to the gap between the versions
>> of GoldWave that I've used?  I was using version 5.68 until I
>> downloaded the latest update, so I'd be grateful to know whether or
>> not anyone thinks this might be the issue.  Alternatively, any other
>> potential causes of the problem or solutions to the issue (including
>> the best method of contacting GoldWave, if that's required) will be
>> very much appreciated.
>>
>> Many thanks in advance.
>>
>> Take care, Danny
>>
>>
>>
>>
>>
>>
>> ---
>> This email has been checked for viruses by AVG.
>> https://www.avg.com
>>
>>
>>
>>
>>
>>
>>
>
>
> -- 
> Danny Miles
> Enabling expression through voice and language
> T: +44(0)7926 972762
> E: toptunesda...@gmail.com
>
>
> 
>
> 








-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3745): https://groups.io/g/all-audio/message/3745
Mute This Topic: https://groups.io/mt/79178824/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Problem with Existing GoldWave Licence

[Colin Howard]

Greetings,

The last address I have for contacting  GoldWave's author is:

chris2...@goldwave.com

Sorry, can't help with the licence issue but suggest try pasting in the user
name and key from your file, this is what I do if the system asks for my key
Etc., to date, since 2010, this has always worked for me.

On Wed, 23 Dec 2020 12:24:03 +, amongst other things, "Danny Miles"
 wrote:

Hi.  I hope everyone is doing well.

I've recently installed the latest version of GoldWave and have been
using it without issue (apart from the fact that the time announced
when a start or end place marker is created is that of the previous
marker and not the one being created at the time).  However, I'd
incorrectly assumed that it had remembered my previous licence
credentials, and so this morning it has asked me to register.  Upon
trying to register with my lifetime licence's user ID and licence, I'm
receiving a notification stating that one or other of these is
incorrect, even though I've typed it straight from the original
licence email.  I assume that lifetime means lifetime, but could it be
that I need to purchase a new one due to the gap between the versions
of GoldWave that I've used?  I was using version 5.68 until I
downloaded the latest update, so I'd be grateful to know whether or
not anyone thinks this might be the issue.  Alternatively, any other
potential causes of the problem or solutions to the issue (including
the best method of contacting GoldWave, if that's required) will be
very much appreciated.

Many thanks in advance.

Take care, Danny






---
This email has been checked for viruses by AVG.
https://www.avg.com



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3742): https://groups.io/g/all-audio/message/3742
Mute This Topic: https://groups.io/mt/79178824/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Internet Radio Streams.

[Colin Howard]

Greetings,

No, TR does not recognize the stream.

On Thu, 12 Nov 2020 18:19:23 +1100, amongst other things, "Barry Chapman"
 wrote:

-http://s2.viastreaming.net:7100


---
This email has been checked for viruses by AVG.
https://www.avg.com



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3702): https://groups.io/g/all-audio/message/3702
Mute This Topic: https://groups.io/mt/78199849/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Internet Radio Streams.

[Colin Howard]

Greetings,

Thanks, it works with TR and I suspect with Winamp.

So, how do I get TR to recognize the codex Mushroom uses?

On Thu, 12 Nov 2020 16:21:58 +1100, amongst other things, "Barry Chapman"
 wrote:

-http://54.38.210.16:9020/stream


---
This email has been checked for viruses by AVG.
https://www.avg.com



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3700): https://groups.io/g/all-audio/message/3700
Mute This Topic: https://groups.io/mt/78199849/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[all-audio] Internet Radio Streams.

[Colin Howard]

Greetings,

Please can somebody help with this problem.

below, is a list of Internet services along with their stream links, most of
which work fine.

Radio 6 international: works with winamp 5.666 build 632 and total Recorder
V8.3.
http://www.radiosix.com/radiosix.mp3

Cladrite radio: works with winamp 5.666 build 632 and total Recorder V8.3.
http://streaming.live365.com/a43564

The Ride: works with winamp 5.666 build 632 and total Recorder V8.3.
http://ais-sa2.cdnstream1.com/2381_128.mp3

Solar Radio: works with winamp 5.666 build 632 and total Recorder V8.3.
http://msmn4.co/proxy/mp3high33?mp=/
Title1=
Length1=-1
version=2

MushroomFM: works with winamp 5.666 build 632 but does not work in total
Recorder V8.3, server returns unrecognized data format.
http://199.180.75.27:80/

Times Radio: works with winamp 5.666 build 632 and total Recorder V8.3.
https://timesradio.wireless.radio/stream

angel radio Havent: works with winamp 5.666 build 632 and total Recorder
V8.3.
http://s6.viastreaming.net:7030/

The Global Voice: works with winamp 5.666 build 632 and total Recorder V8.3.
http://theglobalvoice.info:8000/broadband


Serenade Radio: works with winamp 5.666 build 632 and total Recorder V8.3.
http://4534.cloudrad.io:8284/live

I tried FunHouseRadioOldies, using the link:
https://ofh.theviplounge.co.uk/listen-ofh.php

server returned bad request, can anybody let me have the link for this
stream please?

It is part of the Lounge Radio group.

Thanks.



---
This email has been checked for viruses by AVG.
https://www.avg.com



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3698): https://groups.io/g/all-audio/message/3698
Mute This Topic: https://groups.io/mt/78199849/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[all-audio] Noisy Balls Debuts Thursday.

[Colin Howard]

Greetings,

When I read the subject line, I only read "noisy balls" which made my mind
go into over-boggling status, but on reading the whole post, perhaps this is
something worth following up.

On Thu, 17 Sep 2020 13:57:38 +1000, "Marco Curralejo" 
wrote:

Hi everyone,

Well, in less than 24 hours, Noisy Balls, the world's first blind cricket
podcast, will be debuting on your favourite podcast player.

Here are the all-important links you will need so you can easily tune in and
subscribe.

If you would like to look at our website and episode trailer, go on over to

 https://www.noisyballs.com

and you will be able to subscribe to the podcast using the links provided
there, as well as check out the Facebook group.

If you are using an Android or iOS device, you can go into any podcast
player, i.e. Google Podcasts, Podcast Addict, Apple Podcasts, Overcast,
downcast, basically anything that has pod or cast in its name, and search
for Noisy Balls and we will automatically pop up and I encourage you to
subscribe so you do not miss any of our shows.

FYI, we are listed in Spotify, Deezer, TuneIn, iHeartRadio and Pandora, so
if you use these providers, look us up and you will be able to subscribe
that way as well.

You can also use a Google or Alexa smart device or speaker and ask it to
"play the latest episode of Noisy Balls" and you can even ask that device to
subscribe you to the podcast whilst it is playing.

As a last resort, if you are having trouble finding us, you can copy and
paste the following RSS link into any podcast player and Noisy Balls will
immediately pop up:

https://feeds.buzzsprout.com/1330621.rss

If you require any assistance, shoot me through an email to

feedb...@noisyballs.com

and I would be happy to talk you through the whole process.

Finally, you can join in on the conversation on Facebook at

https://www.facebook.com/groups/noisyballs

Having already pre-recorded a few episodes, I would suggest that even if you
are not a cricket fan, I truly feel that you will get a lot out of this
podcast, as we will have regular guests contributing who's life stories are
truly astounding.

Warm regards,

Marco Curralejo

Website: https://www.noisyballs.com

Facebook: https://www.facebook.com/groups/noisyballs



---
This email has been checked for viruses by AVG.
https://www.avg.com



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3656): https://groups.io/g/all-audio/message/3656
Mute This Topic: https://groups.io/mt/76904917/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[all-audio] a strange cd writing problem, now solved.

[Colin Howard]

Greetings,

My disc writing problem has been solved, really, it proved to be very simple
but, to me, not obvious, though, to be honest it had occurred to me as a
passing thought.

Below, is a list of the tracks I planned to write, but there are two names
associated with track 7, the first name is the one which would not work, the
second is the name of the file which works.

It seems the name given to the track was too long, nothing came up when
using BurnForFree advising of the problem.

 1 - A note from Colin.mp3

2 - Geoff Barker 2007 11 10 second hour contains a chat with Vince Egor.mp3

3 - Geoff Barker 2014 02 22 - second hour music and chat with Vince Ega.mp3

4 - Geoff Barker 2015 06 06 - including a talk with British Rock‘n’Roll
pioneer Vince Eager about his album '75 Not Out'.mp3

5 - Geoff Barker 2016 01 09 - with Charlie Gracie and Vince Eager.mp3

6 - Geoff Barker 2017 01 28 with Vince Eager.mp3

7 - Geoff Barker 2017 09 30 A Tribute to Jack Good, where Geoff talks with
singer, Vince Eager, about his memories of the legendary TV and
record-producer.mp3

7 - Geoff Barker 2017 09 30 A Tribute to Jack Good, where Geoff talks with
singer, Vince Eager, about his memories of the legendary TV and
record-producer.mp3

8 - Geoff Barker 2018 08 12 includes a chat with Billy Fury's friend and
package-tour partner, Vince Eager.mp3

I have now written the disc and all tracks play properly from the disc.



---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3652): https://groups.io/g/all-audio/message/3652
Mute This Topic: https://groups.io/mt/76838744/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[all-audio] a strange cd writing problem.

[Colin Howard]

Greetings,

I was informed only six files had been found, I have now checked and made
sure all 8 files are in the folder.

On Sat, 12 Sep 2020 20:11:28 +0100, "Colin Howard"  wrote:

-Greetings,
-
-I am having a strange cd writing problem which, maybe, somebody can solve.
-
-I have a brand new cd writer which is an USB device, working no problems on
-my Windows 7 desktop.
-
-I want to write an .mp3 audio disc, I am using BurnAware Free.
-
-I tried setting this up but initially the size of 8 tracks was well over
the
-disc capacity, I decided to reduce sampling from 44,100 160KBPS stereo,
-initially to 32,000 160KBPS stereo, tried this on one track, when adding
the
-sizes for the remainder, still more than disc capacity.  I therefore
-reluctantly resorted to 24,000 96KBPS stereo, giving me a size well within
-the disc capacity.
-
-First write gave no problems but on checking the disc found track 7 would
-not play though looking at properties Etc. seemed no problem, all other
-tracks played fine.
-
-I wondered if as all tracks played ok from the hard disc, maybe the file
-might be corrupted, I therefore put it through GoldWave, still using V5.70,
-removed a few seconds from the file's end which took the form of notice
-given to hear programs later on the western regional local BBC services,
-saved the file no problems.
-
-I then tried a second disk from the same batch of Maxels used for the first
-disc, exactly the same results, all but track 7 played.
-
-This time, I also tried calling up Winamp from the desktop, pressed l and
-entered h:\ pressed enter, could see the disk but strangely, track 7 was
-missing.
-
-I have put the folder into DropBox and wonder might somebody find a
-solution? I will leave the folder available until the end of September and
-would welcome any feedback.
-
-Folder Name:
-   jones
-
-DropBox Folder DownLoad Link:
-https://www.dropbox.com/sh/8cawyqr52ehsmxw/AAD59eb7cCmroKEnTWy78wRna?dl=0
-
-
-

-This email has been checked for viruses by AVG.
-https://www.avg.com
-
-
-


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3650): https://groups.io/g/all-audio/message/3650
Mute This Topic: https://groups.io/mt/76811733/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[all-audio] a strange cd writing problem.

[Colin Howard]

Greetings,

I am having a strange cd writing problem which, maybe, somebody can solve.

I have a brand new cd writer which is an USB device, working no problems on
my Windows 7 desktop.

I want to write an .mp3 audio disc, I am using BurnAware Free.

I tried setting this up but initially the size of 8 tracks was well over the
disc capacity, I decided to reduce sampling from 44,100 160KBPS stereo,
initially to 32,000 160KBPS stereo, tried this on one track, when adding the
sizes for the remainder, still more than disc capacity.  I therefore
reluctantly resorted to 24,000 96KBPS stereo, giving me a size well within
the disc capacity.

First write gave no problems but on checking the disc found track 7 would
not play though looking at properties Etc. seemed no problem, all other
tracks played fine.

I wondered if as all tracks played ok from the hard disc, maybe the file
might be corrupted, I therefore put it through GoldWave, still using V5.70,
removed a few seconds from the file's end which took the form of notice
given to hear programs later on the western regional local BBC services,
saved the file no problems.

I then tried a second disk from the same batch of Maxels used for the first
disc, exactly the same results, all but track 7 played.

This time, I also tried calling up Winamp from the desktop, pressed l and
entered h:\ pressed enter, could see the disk but strangely, track 7 was
missing.

I have put the folder into DropBox and wonder might somebody find a
solution? I will leave the folder available until the end of September and
would welcome any feedback.

Folder Name:
jones

DropBox Folder DownLoad Link:
https://www.dropbox.com/sh/8cawyqr52ehsmxw/AAD59eb7cCmroKEnTWy78wRna?dl=0



---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3649): https://groups.io/g/all-audio/message/3649
Mute This Topic: https://groups.io/mt/76806827/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Converting an AVI file with GoldWave to mp3

[Colin Howard]

Greetings Stuart,

You can split any file in GW using cue markers.

1. Open the file you want to split.

2. At start of file press q, this puts in the first marker.

3. However you desire, find the next and subsequent places you want to split
into tracks and once satisfied it is the right place, press q.

4. When completely marked, go to edit menu into q points sub menu and enter
on split file.

5. You are now in a dialogue which is mostly self-explanatory.  By default,
the tracks will be saved in the file's current settings.  I am sure you can
now navigate round the menu no problem.

6. I suggest do not delete the master file with marks until you have checked
the tracks are the way you desire.

You do not place a q marker after the place where you want to split the last
track, nor must you in any way edit the file once the markers are placed
apart from realizing a problem after the last q has been placed, you can
edit anything after the last marker is placed in the remainder of the file
and go on to place markers as necessary.

On Wed, 24 Jun 2020 12:43:08 +0100, "Andy via groups.io"
 wrote:

-Hi again Stewart.
-
-Here is the link:
-
-https://www.goldwave.com/
-
-
-Very best wishes.
-
-Andy.
-- Original Message -
-From: "stewartross via groups.io" 
-To: 
-Sent: Wednesday, June 24, 2020 11:13 AM
-Subject: Re: [all-audio] Converting an AVI file with GoldWave to mp3
-
-
-> hi andy thanks for that can u split flac files using goldwave.
-> where do i get it from?
-> regards stewart
-> - Original Message -
-> From: "Andy via groups.io" 
-> To: 
-> Sent: Wednesday, June 24, 2020 9:34 AM
-> Subject: Re: [all-audio] Converting an AVI file with GoldWave to mp3
->
->
-> Hi stewart.
->
-> You will get loads of suggestions from others with many Free programmes.
->
-> Personally, I purchased Goldwave about 15 years ago for about £17.00.
->
-> To my surprise, I also got a Life Licence with it and I can install it on
-> multiple computers and guess what else, you get absolutely free upgrades
-> for
-> life.
->
-> consequently, to buy Goldwave these days, it must cost well over £30.00.
->
-> There is a great accessible manual that is in the download so you can
-> learn
-> how to place markers directly on the spot you wish to chop and do this
for
-> the whole file and of course, you can name each track and save it in
about
-> 20 different formats.
->
-> So for what's, I think that you will never regret going with Goldwave.
->
-> Very best wishes.
->
-> Andy.
->
->
-> - Original Message -
-> From: "stewartross via groups.io" 
-> To: 
-> Sent: Wednesday, June 24, 2020 7:26 AM
-> Subject: Re: [all-audio] Converting an AVI file with GoldWave to mp3
->
->
->> hi i have some albums what r all in flac format
->> the problem is that each album is one long track
->> if there a piece os software that can split the tracks.
->> also i have some flac tracks that need trimming at the beginning,
->> what is the best way of doing this.
->> from stewart
->> - Original Message -
->> From: "Smiling?" 
->> To: 
->> Sent: Wednesday, June 24, 2020 2:30 AM
->> Subject: Re: [all-audio] Converting an AVI file with GoldWave to mp3
->>
->>
->> You need to install a lame.dll encoder to accomplish this (steps and
->> links below).
->>
->> GoldWave Frequently Asked Questions:
->> https://goldwave.com/faq.php#recsrc
->>
->> How do I save files in MP3 format?
->> To save and create MP3 files the LAME MP3 Encoder must be installed.
->> Recent versions of GoldWave include the encoder. Some older versions
->> download it automatically
->> if you have an active Internet connection when you save the first MP3
->> file However due to a change in the the web server, older versions of
->> GoldWave may not be able to download the encoder automatically.
->>
->> To manually install LAME:
->> list of 3 items nesting level 1
->> 1. Download the LAME_ENC.DLL encoder
->> list of 2 items nesting level 2
->>
->> ? 32 bit version:
->> https://goldwave.com/downloads/lame_enc.dll
->>
->> ? 64 bit version:
->> https://goldwave.com/downloads/lame_enc64.dll
->>
->> list end nesting level 2
->>
->> 2. Copy the LAME_ENC.DLL file into your GoldWave folder. If you
->> downloaded the 64 bit version, rename the file from LAME_ENC64.DLL to
->> LAME_ENC.DLL.
->> 3. Now when you try to save a file as MP3 in GoldWave, use the Browse
->> button instead of the Download button on the Encoder Download window to
->> specify the
->> folder where the LAME_ENC.DLL file is located.
->>
->> -Original Message-
->> From: all-audio@groups.io  On Behalf Of Michael
->> Amaro
->> Sent: Tuesday, June 23, 2020 14:23
->> To: all-audio@groups.io
->> Subject: [all-audio] Converting an AVI file with GoldWave to mp3
->>
->> Hello Listers,
->>
->> How do I convert an AVI file to mp3 using GoldWave?  Running windows 10
->> 1909 latest jaws.
->>
->> Thanks
->>
->> Michael
->>
->> Email:
->>
->> mikeam...@earthlink.net
->>
->> JFK"What kind of peace do I mean? What kind of 

Re: [all-audio] List Query

[Colin Howard]

Greetings,

vi-andr...@freelists.org

There is no footer including subscription information at the end of the post
to which I referred.

Suggest go on the free lists web site and sure, there, you ought to find the
necessary information.

On Thu, 18 Jun 2020 08:35:19 +1000, "Andrea Sherry"
 wrote:

-Could someone give me the address for the VI Android list.
-
-Andrea
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3466): https://groups.io/g/all-audio/message/3466
Mute This Topic: https://groups.io/mt/74948038/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Major problems when attempting to record a stream

[Colin Howard]

Greetings,

I know nothing about audio cable, I am discussing a function in total
Recorder. This can be used to time shift a recording or immediate capture.
I believe GoldWave has a similar feature but never tried using it.

Not quite true, I did, ages ago but could not resolve exactly what format of
url it required.

On Thu, 4 Jun 2020 09:53:23 -0700, "Donald Roberts"
 wrote:

-     Sincere thanks for your comprehensive response.  Sorry for my 
-delayed response.  Yes indeed, Collin, I did receive that message and 
-have saved it for future reference.
-
-
-The majority of streams which I record are not musical; therefore, I 
-wasn't concerned about quality, and the stereo mix option suited my 
-needs.  You mentioned background recording.  Are we talking about 
-something like audio cable?
-
-
-Don Roberts
-
-
-On 6/4/2020 7:42 AM, Colin Howard wrote:
-> Greetings,
->
-> here is the message I sent to the group yesterday, to which, Donald, you
-> neither replied nor acknowledge on list or privately to me.
->
-> To: all-audio@groups.io
-> Subject: Re: [all-audio] Major problems when attempting to record a
stream
-> From: "Colin Howard" 
-> Date: Wed, 03 Jun 2020 08:33:46 +0100
->
-> Greetings,
->
-> I am surprised in TR you are using the stereo mix, I do not for live
-> streams, I capture the sound off the stream by using background
recording.
->
-> Then, again, what live streams are you taking?
->
-> I can supply you with direct links for all the BBC streams plus a few
others
-> such as The Ride Radio Etc.
->
-> Do you know how to use TR's background recording function?
->
-> I use it extensively and can take about five streams on the same machine
-> together and none interfere with each other, maybe I could have more,
think
-> this is rather dependent on my broadband capabilities.
->
-> I can have them all set to background mode, meaning I don't hear the
-> streams, I can go into any and play as it records, stopping play leaves
play
-> at the stop point and resuming picks up.  You can wind back or forward
but
-> when you meet the point of recording, play goes back to the start.
->
-> If you want more info, please come back privately to me at:
->
-> co...@pobox.com
->
-> I've been using TR now for about ten or maybe even more years, my current
-> version is V8.3Pro, I do have V8.6Pro but being happy with the older one,
-> not installed it yet. I use TR on my old WXP laptop and my W7 desktop.
->
-> On Mon, 1 Jun 2020 20:01:51 -0700, "Donald Roberts"
->  wrote:
->
-> -I have two PCs, each of which is running Windows 10 version 1909.  The
-> -HP has the problem, the Dell does not.  I usually use Window-eyes
-> -9.5.4,  but use Jaws 18 when W E encounters an issue, though I am
-> -confident this is not relevant to my current issue.
-> -
-> -
-> -
-> -There are times when I wish to record a stream from the internet. So I
-> -fire up Total Recorder and set the source selection to stereo mix,
-> -having first gone into the sound card settings to make sure that stereo
-> -mix is selected.  But when I attempt to record, the sound is recorded
-> -but plays back at an extremely accelerated rate of speed.  Yes, I know
-> -that Total Recorder has a speed adjustment.  So I make sure that it is
-> -in the normal position, and to prove this, I play back a recording which
-> -was not made from streaming.  And this test recording plays at a normal
-> -speed.
-> -
-> -
-> -
-> -So in order to investigate further, I change to other recorders
-> -including Studio Recorder and Gold Wave, all of which exhibit the
-> -problem when I attempt to record a stream. There was a recent thread
-> -regarding something called Wave Max.  Unfortunately, I paid no attention
-> -to this thread but in retrospect wonder if Wave Max might be an issue.
-> -
-> -
-> -
-> -I am hoping that someone on list has encountered this issue and has
-> -found a solution.  If so, what is the solution?
-> -
-> -
-> -
-> -Thanks.
-> -     Don Roberts
->
->
-> ---
-> This email has been checked for viruses by AVG.
-> https://www.avg.com
->
->
-> 
->
-
-


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3410): https://groups.io/g/all-audio/message/3410
Mute This Topic: https://groups.io/mt/74629346/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Major problems when attempting to record a stream

[Colin Howard]

Greetings,

as, no doubt you have noted, not GoldWave, but Total Recorder!  Senior
moment, too many pieces of software doing similar jobs!

On Thu, 04 Jun 2020 12:45:44 +0100, "Colin Howard"  wrote:

-Donald,
-
-I find it unbelievable you've not managed to sort this speed problem, I
sent
-you concise and clear instructions how to go about it in GoldWave, did you
-ever receive them?
-
-If not, I'll look up the original post again and resend to the list.
-
-On Wed, 3 Jun 2020 07:40:04 -0700, "Donald Roberts"
- wrote:
-
--Studio Recorder works well with any screen reader.  I usually use
--Window-Eyes, but Jaws also works very well with it.
--
--
--Don Roberts
--
--
--On 6/3/2020 4:40 AM, stewartross via groups.io wrote:
--> is studio recorder jaws user friendly?
--> - Original Message - From: "Donald Roberts"
--> 
--> To: 
--> Sent: Tuesday, June 02, 2020 7:44 PM
--> Subject: Re: [all-audio] Major problems when attempting to record a
--> stream
-->
-->
-->> Thank you so much, Georgina, for your prompt response. What you
-->> suggest makes sense. But suggest places to check. For example, I know
-->> how to check sample rates in the various recording programs such as
-->> Total Recorder, GoldWave, and Studio Recorder; but where would I
-->> check sample rate settings in the sound card? When I look at those
-->> settings, all I see are volume, balance, and whether or not to listen
-->> while recording.
-->>
-->>
-->> Thanks.
-->>
-->>
-->> Don Roberts
-->>
-->>
-->> On 6/2/2020 8:23 AM, Georgina Joyce wrote:
-->>> Hello,
-->>>
-->>> It sounds like you are mixing sample rates. Check that every listing
-->>> matches. whether it be 44,100 or whatever, the hardware can handle.
-->>>
-->>> Regards
-->>>> On 2 Jun 2020, at 04:01, Donald Roberts
-->>>>  wrote:
-->>>>
-->>>> I have two PCs, each of which is running Windows 10 version 1909.  
-->>>> The HP has the problem, the Dell does not.  I usually use
-->>>> Window-eyes 9.5.4,  but use Jaws 18 when W E encounters an issue,
-->>>> though I am confident this is not relevant to my current issue.
-->>>>
-->>>>
-->>>>
-->>>> There are times when I wish to record a stream from the internet.
-->>>> So I fire up Total Recorder and set the source selection to stereo
-->>>> mix, having first gone into the sound card settings to make sure
-->>>> that stereo mix is selected.  But when I attempt to record, the
-->>>> sound is recorded but plays back at an extremely accelerated rate
-->>>> of speed.  Yes, I know that Total Recorder has a speed adjustment. 
-->>>> So I make sure that it is in the normal position, and to prove
-->>>> this, I play back a recording which was not made from streaming. 
-->>>> And this test recording plays at a normal speed.
-->>>>
-->>>>
-->>>>
-->>>> So in order to investigate further, I change to other recorders
-->>>> including Studio Recorder and Gold Wave, all of which exhibit the
-->>>> problem when I attempt to record a stream. There was a recent
-->>>> thread regarding something called Wave Max.  Unfortunately, I paid 
-->>>> no attention to this thread but in retrospect wonder if Wave Max
-->>>> might be an issue.
-->>>>
-->>>>
-->>>>
-->>>> I am hoping that someone on list has encountered this issue and has
-->>>> found a solution.  If so, what is the solution?
-->>>>
-->>>>
-->>>>
-->>>> Thanks.
-->>>>  Don Roberts
-->>>>
-->>>>
-->>>>
-->>>>
-->>> Gena
-->>>
-->>> Call: M0EBP
-->>> DMR ID: 2346259
-->>> Loc: IO83PS
-->>> 73
-->>>
-->>>
-->>>
-->>
-->>
-->>
-->
-->
-->
-->
--
--
-
-

-This email has been checked for viruses by AVG.
-https://www.avg.com
-
-
-


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3402): https://groups.io/g/all-audio/message/3402
Mute This Topic: https://groups.io/mt/74629346/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Increasing the Speed of a WAV File

[Colin Howard]

Darran,

Pleased it worked for you.

There are other values in the tabs but not altogether sure how these can be
used, maybe more trials experimenting with these setting could produce
better quality sound.

As, no doubt, you have noticed, there are other algorythms available, but I
have found the first one, similarity, gives consistently the best results.

On Thu, 4 Jun 2020 15:51:20 +0100, "Darran Ross via groups.io"
 wrote:

-Many thanks Colin, this worked a treat!
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3401): https://groups.io/g/all-audio/message/3401
Mute This Topic: https://groups.io/mt/74656765/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Major problems when attempting to record a stream

[Colin Howard]

Greetings,

here is the message I sent to the group yesterday, to which, Donald, you
neither replied nor acknowledge on list or privately to me.

To: all-audio@groups.io
Subject: Re: [all-audio] Major problems when attempting to record a stream
From: "Colin Howard" 
Date: Wed, 03 Jun 2020 08:33:46 +0100

Greetings,

I am surprised in TR you are using the stereo mix, I do not for live
streams, I capture the sound off the stream by using background recording.

Then, again, what live streams are you taking?

I can supply you with direct links for all the BBC streams plus a few others
such as The Ride Radio Etc.

Do you know how to use TR's background recording function?

I use it extensively and can take about five streams on the same machine
together and none interfere with each other, maybe I could have more, think
this is rather dependent on my broadband capabilities.

I can have them all set to background mode, meaning I don't hear the
streams, I can go into any and play as it records, stopping play leaves play
at the stop point and resuming picks up.  You can wind back or forward but
when you meet the point of recording, play goes back to the start.

If you want more info, please come back privately to me at:

co...@pobox.com

I've been using TR now for about ten or maybe even more years, my current
version is V8.3Pro, I do have V8.6Pro but being happy with the older one,
not installed it yet. I use TR on my old WXP laptop and my W7 desktop.

On Mon, 1 Jun 2020 20:01:51 -0700, "Donald Roberts"
 wrote:

-I have two PCs, each of which is running Windows 10 version 1909.  The
-HP has the problem, the Dell does not.  I usually use Window-eyes 
-9.5.4,  but use Jaws 18 when W E encounters an issue, though I am
-confident this is not relevant to my current issue.
-
-
-
-There are times when I wish to record a stream from the internet. So I
-fire up Total Recorder and set the source selection to stereo mix,
-having first gone into the sound card settings to make sure that stereo
-mix is selected.  But when I attempt to record, the sound is recorded
-but plays back at an extremely accelerated rate of speed.  Yes, I know
-that Total Recorder has a speed adjustment.  So I make sure that it is
-in the normal position, and to prove this, I play back a recording which
-was not made from streaming.  And this test recording plays at a normal 
-speed.
-
-
-
-So in order to investigate further, I change to other recorders
-including Studio Recorder and Gold Wave, all of which exhibit the
-problem when I attempt to record a stream. There was a recent thread
-regarding something called Wave Max.  Unfortunately, I paid no attention
-to this thread but in retrospect wonder if Wave Max might be an issue.
-
-
-
-I am hoping that someone on list has encountered this issue and has
-found a solution.  If so, what is the solution?
-
-
-
-Thanks.
-     Don Roberts


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3399): https://groups.io/g/all-audio/message/3399
Mute This Topic: https://groups.io/mt/74629346/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Trying To Convert File To MP3

[Colin Howard]

Greetings,

I agree, I've converted .mp4 files using my GW V5.70 without problems.

One way in GW to do this is, create a new file and save it to the name and
format required using ctrl+s, delete it's contents, switch to the file you
want to convert, select the whole thing and paste into the other file.  Save
the resulting file, this stops at least one unnecessary conversion hence
loss of fidelity.

I've been using GW since V5.12 over about the last fourteen or so years.

On Wed, 3 Jun 2020 16:31:14 -0400, "JOHN RIEHL via groups.io"
 wrote:

-My recommendation is to use goldwave. Tha tprogram will do everything you
are trying to do but much more easily
-
-
--Original Message-
-From: all-audio@groups.io  On Behalf Of Georgina Joyce
-Sent: Wednesday, June 3, 2020 4:28 PM
-To: all-audio@groups.io
-Subject: Re: [all-audio] Trying To Convert File To MP3
-
-Hello,
-
-You are working with 2 lossy formats. You should convert to wav or another
lossless format make your cuts etc then convert to mp3. Because you might
not know it but this is what switch would have been doing in the background
I am guessing that something wasn’t carried across to the mp3 file. This
will cut down on the number of downward conversions. Which is important
because each conversion further detail is lost, hence their name lossy
formats.
-
-HTH
-
-Gena
-> On 3 Jun 2020, at 21:14, Tom Kaufman  wrote:
->
-> Hello list:  Am attempting to convert an MP4 file to MP3; here's what
-> is
-> happening: I am using the program Switch to convert this MP4 file to
-> an MP3 file, so I then can running it through MP3 Direct Cut to trim
-> some parts off!  However, while I have managed to convert to MP3, then
-> I find I have no file.at least, the file isn't playing in Winamp; nor
-> will it play in MP3 Direct Cut!  What is it I am missing?  An doing
-> this for a friend who needs this, so am hoping I can get a solution to
this one!
->
-> Thanks,
->
-> Tom Kaufman
->
->
->
->
-
-Gena
-
-Call: M0EBP
-DMR ID: 2346259
-Loc: IO83PS
-73
-
-
-
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3398): https://groups.io/g/all-audio/message/3398
Mute This Topic: https://groups.io/mt/74658171/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Major problems when attempting to record a stream

[Colin Howard]

Donald,

I find it unbelievable you've not managed to sort this speed problem, I sent
you concise and clear instructions how to go about it in GoldWave, did you
ever receive them?

If not, I'll look up the original post again and resend to the list.

On Wed, 3 Jun 2020 07:40:04 -0700, "Donald Roberts"
 wrote:

-Studio Recorder works well with any screen reader.  I usually use
-Window-Eyes, but Jaws also works very well with it.
-
-
-Don Roberts
-
-
-On 6/3/2020 4:40 AM, stewartross via groups.io wrote:
-> is studio recorder jaws user friendly?
-> - Original Message - From: "Donald Roberts"
-> 
-> To: 
-> Sent: Tuesday, June 02, 2020 7:44 PM
-> Subject: Re: [all-audio] Major problems when attempting to record a
-> stream
->
->
->> Thank you so much, Georgina, for your prompt response. What you
->> suggest makes sense. But suggest places to check. For example, I know
->> how to check sample rates in the various recording programs such as
->> Total Recorder, GoldWave, and Studio Recorder; but where would I
->> check sample rate settings in the sound card? When I look at those
->> settings, all I see are volume, balance, and whether or not to listen
->> while recording.
->>
->>
->> Thanks.
->>
->>
->> Don Roberts
->>
->>
->> On 6/2/2020 8:23 AM, Georgina Joyce wrote:
->>> Hello,
->>>
->>> It sounds like you are mixing sample rates. Check that every listing
->>> matches. whether it be 44,100 or whatever, the hardware can handle.
->>>
->>> Regards
- On 2 Jun 2020, at 04:01, Donald Roberts
-  wrote:
-
- I have two PCs, each of which is running Windows 10 version 1909.  
- The HP has the problem, the Dell does not.  I usually use
- Window-eyes 9.5.4,  but use Jaws 18 when W E encounters an issue,
- though I am confident this is not relevant to my current issue.
-
-
-
- There are times when I wish to record a stream from the internet.
- So I fire up Total Recorder and set the source selection to stereo
- mix, having first gone into the sound card settings to make sure
- that stereo mix is selected.  But when I attempt to record, the
- sound is recorded but plays back at an extremely accelerated rate
- of speed.  Yes, I know that Total Recorder has a speed adjustment. 
- So I make sure that it is in the normal position, and to prove
- this, I play back a recording which was not made from streaming. 
- And this test recording plays at a normal speed.
-
-
-
- So in order to investigate further, I change to other recorders
- including Studio Recorder and Gold Wave, all of which exhibit the
- problem when I attempt to record a stream. There was a recent
- thread regarding something called Wave Max.  Unfortunately, I paid 
- no attention to this thread but in retrospect wonder if Wave Max
- might be an issue.
-
-
-
- I am hoping that someone on list has encountered this issue and has
- found a solution.  If so, what is the solution?
-
-
-
- Thanks.
-  Don Roberts
-
-
-
-
->>> Gena
->>>
->>> Call: M0EBP
->>> DMR ID: 2346259
->>> Loc: IO83PS
->>> 73
->>>
->>>
->>>
->>
->>
->>
->
->
->
->
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3397): https://groups.io/g/all-audio/message/3397
Mute This Topic: https://groups.io/mt/74629346/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Increasing the Speed of a WAV File

[Colin Howard]

Greetings,

GoldWave's time warp facility will achieve this.  Go to menu and effects, to
time warp, go to first preset which is similarity, tab across to specify
change in  length or percent, mine is by default set to percent, decide
which you need, tab again and you will see an appropriate value, amend as
desired, tab round to ok, enter, job complete.  Suggest try on a small
sample first, if happy, undo and apply to required total of audio.

Be aware, as this is quite a complex algorythm, it may take a fairly long
time and also be aware make several small changes rather than one large
change.  Make sure your undo scheme can cope with a largish numbers of
ctrl-z, I have mine set to 15, on my system, the maximum allowed seems to be
20, not sure if this is a GoldWave or system limit. It can be found under
options then go down to file storage, on my system is labelled undo lefels.

I am still using GW V5.70, on both WXP laptop and W7 desktop.

On Wed, 3 Jun 2020 20:05:36 +0100, "Darran Ross via groups.io"
 wrote:

-Hi list.
-
-I've got a folder of wav files that I'd like to increase the speed of
without effecting the pitch.
-
-Can anyone recommend a program to do same?
-
-Thanks to anyone who can help.
-
-Darran
-
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3396): https://groups.io/g/all-audio/message/3396
Mute This Topic: https://groups.io/mt/74656765/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Major problems when attempting to record a stream

[Colin Howard]

Greetings,

I am surprised in TR you are using the stereo mix, I do not for live
streams, I capture the sound off the stream by using background recording.

Then, again, what live streams are you taking?

I can supply you with direct links for all the BBC streams plus a few others
such as The Ride Radio Etc.

Do you know how to use TR's background recording function?

I use it extensively and can take about five streams on the same machine
together and none interfere with each other, maybe I could have more, think
this is rather dependent on my broadband capabilities.

I can have them all set to background mode, meaning I don't hear the
streams, I can go into any and play as it records, stopping play leaves play
at the stop point and resuming picks up.  You can wind back or forward but
when you meet the point of recording, play goes back to the start.

If you want more info, please come back privately to me at:

co...@pobox.com

I've been using TR now for about ten or maybe even more years, my current
version is V8.3Pro, I do have V8.6Pro but being happy with the older one,
not installed it yet. I use TR on my old WXP laptop and my W7 desktop.

On Mon, 1 Jun 2020 20:01:51 -0700, "Donald Roberts"
 wrote:

-I have two PCs, each of which is running Windows 10 version 1909.  The
-HP has the problem, the Dell does not.  I usually use Window-eyes 
-9.5.4,  but use Jaws 18 when W E encounters an issue, though I am
-confident this is not relevant to my current issue.
-
-
-
-There are times when I wish to record a stream from the internet. So I
-fire up Total Recorder and set the source selection to stereo mix,
-having first gone into the sound card settings to make sure that stereo
-mix is selected.  But when I attempt to record, the sound is recorded
-but plays back at an extremely accelerated rate of speed.  Yes, I know
-that Total Recorder has a speed adjustment.  So I make sure that it is
-in the normal position, and to prove this, I play back a recording which
-was not made from streaming.  And this test recording plays at a normal 
-speed.
-
-
-
-So in order to investigate further, I change to other recorders
-including Studio Recorder and Gold Wave, all of which exhibit the
-problem when I attempt to record a stream. There was a recent thread
-regarding something called Wave Max.  Unfortunately, I paid no attention
-to this thread but in retrospect wonder if Wave Max might be an issue.
-
-
-
-I am hoping that someone on list has encountered this issue and has
-found a solution.  If so, what is the solution?
-
-
-
-Thanks.
-     Don Roberts
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3364): https://groups.io/g/all-audio/message/3364
Mute This Topic: https://groups.io/mt/74629346/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] A Zoom question.

[Colin Howard]

Joe,

I asked the original sender if the cam needs power, it seems it can be
powered even from an USB hub like mine.

I've sent the info via my P.A to her son who has an Amazon account, hope he
is able to order it for me to be delivered at my home address, hope, then,
it is a simple process of plugging in, finding the device in my Windows 7
sounds and audio devices and enabling same.

However, before attempting this, hope to avail myself of a pair of eyes to
peruse the documentation rather than go ploughing in feet first and possibly
damaging my system!

On a personla note, you did not come back to me about Paul David's online
problems whereas both Terry and Kevin did.  It seems he's now sorted, had an
engineer out yesterday evening to replace his faulty power unit.

On Wed, 20 May 2020 20:21:09 +0100, "Joe Paton" 
wrote:

-looks good colin.
-
-Availability is the problem these days, but I'm interested myself.
-
-
-take care, thanks for the information.
-Joe
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3315): https://groups.io/g/all-audio/message/3315
Mute This Topic: https://groups.io/mt/74288922/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] A Zoom question.

[Colin Howard]

Joe,

thanks.

I'll look it up but am aware of possible delays.

Meantime, I received the following email which would seem to answer most, if
not all my needs.  A friend has an amazon account I don't, will ask them to
purchase for me. I've written back to the original sender to ask if the
system needs power or can obtain enough if plugged into an USB un-powered
hub.

Email follows:


Possible WebCam for Zoom.

From: Mike 
Date: Mon, 18 May 2020 13:49:10 +0100

Hi Colin

I recently bought this camera from Amazon for about £50 (link below).

https://amazon.co.uk/gp/product/B07FNB2KDQ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8=1

Very easy to use, USB connection, no set up or drivers required, it just
works when plugged in, on a Windows 10 machine anyway.

It includes an integrated microphone and no switches required. Zoom uses
Alt + A to switch mike on or off and Alt + V to switch video on or off.

The camera is designed to hook over a monitor but will stand on a flat
surface with tilt and also has a standard threaded hole in the base to
accept a camera tripod or similar.

I'm sure there are cheaper but this one is good quality and provides HD
video.

Hope that helps, good luck

Kind Regards,
Mike
Chair
ROCKTALK TN Stirling
m...@rocktalk.org.uk

On Mon, 18 May 2020 14:50:05 +0100, "Joe Paton" 
wrote:

-Colin,
-I think it was called the life-cam, from Microsoft.
-You will be verry lucky to buy anything in U K  outlets at present.
-
-A big shortage due to the accelleration of online meetings and so on.
-requiring camera and mic kits.
-So much so, that a company we work with, have bought there employees
-laptops, and are using the in-built web cams and microphones because
-they can not locate any camera's or microphones for remote working.
-But when available, The Microsoft Life-cam, retailed for about 28 uk
-pounds, and really easy to set up, clips to the top edge of your monitor.
-Plug and play, beeing microsoft, drivers already on most windows 7, 8
-and windows 10 systems.
-Good luck.
-
-A reasonable microphone for the job you want it to do.
-
-
-
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3289): https://groups.io/g/all-audio/message/3289
Mute This Topic: https://groups.io/mt/74288922/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[all-audio] A Zoom question.

[Colin Howard]

Greetings,

Please can anybody advise what kind of webcam I can purchase. Currently
using Windows7 on a desktop, I want it to be purely plug-in-and-use, with no
additional setup, in colour, presumably with a mike, the WebCam, capable of
simply standing on a desk or table useable from a un-powered USB hub.

Presently, I only have an USB mike but would like to show video of my self
when attending meetings.

I assume when, in the Zoom I am advised video is off, some kind of switch on
the cam ought to put it on, same with mike which when I join I am advised
audio is muted.  This, I unmute using alt with a as instructed by the Zoom
system.

I have no sight and no readily accessible sighted assistance, therefore, the
WebCam for which I am looking must be totally accessible for me.

Where can I obtain such a basic WebCam please?

Thanks.



---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3274): https://groups.io/g/all-audio/message/3274
Mute This Topic: https://groups.io/mt/74288922/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Seeking a Rough Quality Comparison

[Colin Howard]

Greetings,

I would say you and I and most of us are armed with an ideal means to
compare quality, they normally reside as pieces of strangely shaped
cartilage on the sides of our heads and direct the sound waves into the
grey-white mush held in the bony case.

Nout so good as one's own ears!

Figures and stats cannot ever replace what the Lord has given us!

On Thu, 9 Jan 2020 17:44:11 -, "Darran Ross via Groups.Io"
 wrote:

-Hi List.
-
-Can anyone in the know provide me with a rough idea of what the equivalent
kbs would be for a m4a file when compared to a 160 mp3 version?
-
-I probably haven't explained that very well.
-
-If I have a file saved at 96kbs m4a, what would a rough approximation to
this be for an mp3 file? Would it be 128kbs or 160 kbs for example?
-
-I've tried finding some kind of guide on the web, but haven't been able to
turn up anything that I can readily see as a comparison.
-
-Thanks to anyone with any knowledge who can help me out with this one!
-
-Darran
-
-
-
-
-


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3004): https://groups.io/g/all-audio/message/3004
Mute This Topic: https://groups.io/mt/69584063/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] A couple of gold wave questions

[Colin Howard]

Greetings,

Sorry this is so late but have been suffering email and pc problems for the
last few weeks and only just seen your post.

I am using GW V5.70 but what I write applies equally to your version.

1. To enable jumping in small increments, you need to set the zoom level.
When GW opens a file, normally the screen shows in visual form the whole
length, hence moving markers / arrows, moves a percentage of the whole file.

In GW, go to the view menu, ensure scrollock (ctrl l) is checked, this
enables arrow / marker movements.  Go down the menu, you will find loads of
zoom-related entries, zoom in is shift up, zoom out shift down, then there
are several presets, such as zoom to ten seconds, zoom to one secont . . .
what these mean is only the specified length of the file is shown on the
screen hence the arrow / marker values are appropriately changed.  I mostly
tend to set my zoom rate at one second, which is alt with one.

To help, you may care also to set the edit field in the play tab, this
follows the rewind/wind forward settings and, certainly in versions before
any of the V6 ones, by default is set to 0.00, I have mine set to 0.15,
which means whenever I move a marker or arrow, I hear fifteen hundredths of
the zoom value, in most cases this is adequate for my editting and setting
this field increases both accuracy and speed of complex edits and use of
other effects.

2. The three play controls are intended to be used to access the file in
different ways.  I have mine set as follows which gives me all the
flexibility I could desire.

Play1, executed by F2 is set to play all, meaning it starts at the beginning
of the file.

Play2, executed by F3, I have set to play selection, meaning I play anything
between start and end marker.

Play3, executed by F4 which, in versions below 6 is not set by default, I
have set to play view, meaning it plays whatever is showing on the screen.

These can be set in the play tab of control properties.

When GW first opens the file all these play controls start at the beginning
and play the file in it's entirity, their action is, thus, ruled by your
settings of zoom, you can, therefore, see how important setting the best
zoom rate for your needs is of the utmost importance.

Late though I am, hope the above explanations prove to be useful and if I
can assist further, having used GW in it's various forms since 2006, please
get in touch.

On Sat, 2 Nov 2019 00:33:14 -0400, "JOHN RIEHL via Groups.Io"
 wrote:

-Hi. I'm using Gold wave v6.41 and JAWS 2020. I have lengthy MP3 files of
-lectures I'm trying to edit. I'm able to set beginning and end markers with
-the [ and ] keys and then delete portions I want to delete. However, when I
-press the right and left arrows to move through the cuts, I skip ahead or
-back at least five minutes, which is way too long a time. I'd like to set
-the time Gold wave skips ahead or back when I'm going through a lecture to,
-say, one minute. How do I do this? Changing the fields for play 1, 2 and 3
-in the play menu don't seem to have any effect. Thanks!
-
- 
-
-Also, what do play 1, play 2 and play3 do, anyway?
-
-Thanks. John
-
-
-


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#2978): https://groups.io/g/all-audio/message/2978
Mute This Topic: https://groups.io/mt/40722886/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] friendly dropbox tip

[Colin Howard]

Greetings,

Having read the thread, one comment.

If the ?dl=0 is left and the link is to a folder, the recippient can
download individual items from a folder.  If the ?dl=0 is changed to ?dl=1
for a folder link, I, using Windows 7 on a desktop machine am invited to
download the folder as a .zip file.  The folder structure is maintained.

I do use WinZip rather than the W7 offering, as I find this by far and away
the most flexible system.

On Fri, 26 Jul 2019 04:23:35 +1000, "Dane Trethowan"
 wrote:

-Well actually no, I don’t need to change anything.
-All people have to do is to look for the Download menu option at the top of
the Dropbox page and follow the prompts as there are several methods of
downloading.
-So there you are, a very simple and straight forward solution which gives
the user total flexibility in what they want to do.
-
-
-> On 26 Jul 2019, at 2:52 am, tim cumings  wrote:
->
-> When sending out a dropbox link to the list, change the last
->
-> four characters in the link from "dl=0" to "dl=1."
-> This will make it easier for anyone accessing the link to download the
particular file.
-> On 7/25/2019 7:34 AM, Dane Trethowan wrote:
->> My Dad found this on youtube and its a most interesting view.
->> The video is produced from a visual perspective so it does lack the
necessary information we need about which keys to press to do what however
the video does show most of the functions and is a great tool from which to
work for sighted people to explain the shortcut layout and so on.
->> The video contains many useful tips for recording that beginners will
find most instructive when using the Zoom H1N or indeed any similar
recorder.
->>
https://www.dropbox.com/s/d9ljl9clv0ddvhr/Beginner%27s%20Guide%20to%20the%20Zoom%20H1n%20audio%20recorder%20%282018%29.mp4?dl=0

->>
->>
->>
->>
->
->
->
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#2617): https://groups.io/g/all-audio/message/2617
Mute This Topic: https://groups.io/mt/32600615/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Documentary: Apollo 11 - A Step That Changed The World

[Colin Howard]

Greetings,

I can answer as I've downloaded the file it is 1.35GB, plays on my system of
W7 using WMP12.

On Sun, 14 Jul 2019 12:14:53 -0400, "Hamit Campos" 
wrote:

-Dain how big is this file? Should I even try? Remember the trouble i had
-when you tried to share the Blind Cool Tech folders with me. Which We'll
-have to think of something else with that my friend.


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#2523): https://groups.io/g/all-audio/message/2523
Mute This Topic: https://groups.io/mt/32461934/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Documentary: Apollo 11 - A Step That Changed The World

[Colin Howard]

Greetings,

I am old enough to have watched the landing at halfpast three in the morning
of 21 July 1969, on a small black-and-white 405-line tv set.

If it be the Lord's will to allow me to remain living on the Earth, I reach
70 years of age on 27 July.

On Sun, 14 Jul 2019 04:53:17 +1000, "Dane Trethowan"
 wrote:

-To: 
-Subject: [all-audio] Documentary: Apollo 11 - A Step That Changed The World
-From: "Dane Trethowan" 
-Date: Sun, 14 Jul 2019 04:53:17 +1000
-
-Hi everyone,
-
-I'm watching this documentary right now as recorded by my Silicondust TV
-Tuner and Plex Media Server software so though I'd share it with you all
and
-hope it brings back memories for some and perhaps is a field of discovery
-for others like me who just aren't old enough to remember the amazing
events
-of that time.
-
-This video was recorded and uploaded as is from live Free To Air Australian
-Television and is fairly large in size.
-
-Enjoy!
-
-https://www.dropbox.com/s/m9mddk5lv3sdze6/Apollo%2011%20-%20A%20Step%20That%
-20Changed%20The%20World%20-%202019-07-13%2019%2000%2000%20-%20Episode%2007-1
-3.ts?dl=0
-
-
-
-
-


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#2518): https://groups.io/g/all-audio/message/2518
Mute This Topic: https://groups.io/mt/32461934/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Goldwave problem persists

[Colin Howard]

Joe,

I am surprised you sent a link to download V5.58, when I sent a DB link for
v5.70, the last version before the rewrite of V6, which, in my view, is by
far and away in advance of v5.58.

On Mon, 03 Jun 2019 14:16:35 +0100, "Joe Paton via Groups.Io"
 wrote:

-Hi Don
-link to 5.58 below.
-
-I have other versions if you need them don.
-
-https://www.dropbox.com/s/zdnujxz3zuv7egq/gwave558.exe?dl=1
-Joe Paton
-telephone: 01702 543624
-Mobile: 0 7 9 6 7 3 8 2 9 6 4
- web site: http://www.apart.org


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#2305): https://groups.io/g/all-audio/message/2305
Mute This Topic: https://groups.io/mt/31906764/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Key commands in GoldWave

[Colin Howard]

Greetings,

Here is the DropBox link for GW V5.70, it will be left until Sunday, 2019 02
10 mid day UK time or soon as you let me know you have taken it.

File Name:
GoldWave v5.70 files.zip

Modified dropBox DownLoad Link:
https://www.dropbox.com/s/mss5zm0xilu6eix/GoldWave%20v5.70%20files.zip?dl=1


---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#1891): https://groups.io/g/all-audio/message/1891
Mute This Topic: https://groups.io/mt/29627114/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Key commands in GoldWave

[Colin Howard]

Greetings again,

I am curious to know why one would ever uncheck the auto scroll lock because
what benefit would this achieve?  What can one do in GW not possible when
this is checked?

Is it perhaps mouse- or graphics-related?



---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#1884): https://groups.io/g/all-audio/message/1884
Mute This Topic: https://groups.io/mt/29627114/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Key commands in GoldWave

[Colin Howard]

Greetings,

Howard, I suspect you have unchecked auto-scrol-lock in the view menu, it is
a toggle ctrl with l, this is why page up down arrows left right Etc. are
not working.

I've activated this before by accident and wondered why all of a sudden
these keys don't work.



---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#1883): https://groups.io/g/all-audio/message/1883
Mute This Topic: https://groups.io/mt/29627114/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[all-audio] [Onlyaudiodramas] All 15 series of Home Front on SendSpace.

[Colin Howard]

Greetings,

woops! sorry! sent to the wrong group as subject line illustrates.



---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#1575): https://groups.io/g/all-audio/message/1575
Mute This Topic: https://groups.io/mt/28074722/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Saving settings in GoldWave.

[Colin Howard]

Greetings,

On another group it has been suggested I use the search box typing in
GoldWave Setup which the sender believes should land in the setup system.
I'll give it a try.



---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#1211): https://groups.io/g/all-audio/message/1211
Mute This Topic: https://groups.io/mt/24977318/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Saving settings in GoldWave.

[Colin Howard]

Greetings,

all settings, one could save them in GW, for instance, on this XP machine, I
do:

Esc and control,

p for programs,

then cursor down to GoldWave,

then right arrow into the sub menu, first GoldWave, second GoldWave help,
third GoldWave manual and fourth GoldWave Setup.

Going into this item, I am presented with a list of things, these can be set
as desired, virtualized window here is what I then see.

GoldWave Setup Options
Disable effect plug-ins
Disable file format plug-ins
Disable visual plug-ins
Do not use OpenGL
Disable Wave Audio Compression Manager
Ignore floating point errors
Disable Cue/Info/New warning messages
Disable background waveform drawing
Allow playback while recording
Do not force windows on top
Assume low priority processing
Reset audio devices every time
Redraw Sound windows indirectly (no flicker)
Force screen reader mode
Backup Settings... Restore Settings...
OK Cancel Help

If I backup settings, I receive a file named:

GoldWaveSettings.gws

on my W7 machine, using the same program, I cannot find the equivalent
mechanism.  This would enable me to transport my own settings to use them
elsewhere.  The keyboard save/install is still present and easily
accessible.

I want to do the same thing on W7 W10 or whatever, in V6.32 and, presumably,
in the just released V6.35.



---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#1210): https://groups.io/g/all-audio/message/1210
Mute This Topic: https://groups.io/mt/24977318/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[all-audio] Saving settings in GoldWave.

[Colin Howard]

Greetings,

On my XP machine, including GW V5.70, I could save settings, if I did escape
and control, then cursored through the programs list down to GoldWave, then
cursored right into the setting, besides altering such things as playback
and loads of other items, I could save the settings.  On my W7 machine using
the same program and also in V6.32 and probably also in V6.35 received but
not yet examined, could find no way of saving settings.

Please can anybody point me as to how I may achieve this?

Thanks.



---
This email has been checked for viruses by AVG.
https://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#1206): https://groups.io/g/all-audio/message/1206
Mute This Topic: https://groups.io/mt/24977318/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] recording with a software timer

[Colin Howard]

Joe,

TotalRecorder will do exactly what he needs, least the version I have which
is V8.3PRO will.

I use it all the time to record whilst away, I can have up to five streams
recording on one pc at the same time but this obviously must depend largely
on the capacity of the broadband available.

TR needs the actual streaming link, such as, for radio 4 fm:

http://bbcmedia.ic.llnwd.net/stream/bbcmedia_radio4fm_mf_p

Go to tools, down to scheduler and enter.

Then do alt n for new, enter.

You are now on the general tab, first field is comment, enter a short
comment which helps one negotiate through the list of jobs, then tab to
radio buttons, record, background play, default is record, this causes the
sound to play whilst recording, I go down to background.  next two radio
buttons, absolute time and duration, default is absolute time this I use, no
idea about use of duration.

4 radio buttons, start / stop time, default once, below is  weeklyh, daily
and special, I've not investigated special.

Next, series of check boxes, what these are depends on the last setting,
once gives you date spin box for year, month and day, defaults to current
date, cursor up/down to set required date then next tab is start-stop time
hh mm ss for each. Daily shows spin boxes for actual time, hours, minutes,
seconds for start then same for end. default is all zero, cursor up/down to
set for each.  Weekly shows 9 selections, weekdays, weekends, then each day
starting with Sunday.  Special, which I have never used, shows a settings
button, I do not know what this is or how it works.

Next, having chosen (daily has already been set) we have spin boxes for
start time hh mm ss and end time hh mm ss.

Now start-stop time now, use predefined cryteria, advanced buttons, I've
left these alone at default.

Next the url for the stream.

Next, is a more button, left this alone.

Then two radio buttons one says let TR choose the file name the other you
choose the file name into which the recording will be saved.  On my system
in the my music folder, I have a folder called TR DownLoads, in this, a
folder for 2018, within this, a folder for each month, within this a folder
for each day, within this, TR would place the file in the form of the stream
url plus date and time, so far, I have not been able to find a way of
ensuring TR saves other than in .mp3 128kbps 44,100Hertz stereo, maybe one
of the buttons mentioned above makes this possible, or one of the remaining
buttons. The TR Downloads folder is populated as TR needs to set anything
up.

Next edit field for file name, next file name button, then checkbox create a
new track separator for each clip when background recording by default is
unchecked, then ok, cancel, help.

Jobs can be exported / imported.

Having created your job(s), go to apply, return, ok, return, job is
completed.

You cannot alter scheduled jobs when TR is running a scheduled job.

Hope this rather brief explanation is sufficiently clear.



---
This email has been checked for viruses by AVG.
http://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#342): https://groups.io/g/all-audio/message/342
View All Messages In Topic (3): https://groups.io/g/all-audio/topic/15599297
Mute This Topic: https://groups.io/mt/15599297/21656
New Topic: https://groups.io/g/all-audio/post

Change Your Subscription: https://groups.io/g/all-audio/editsub/21656
Group Home: https://groups.io/g/all-audio
Contact Group Owner: all-audio+ow...@groups.io
Terms of Service: https://groups.io/static/tos
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Recording multiple sounds simultaneously on a PC

[Colin Howard]

Greetings,

thankjs, will take a look.



---
This email has been checked for viruses by AVG.
http://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#294): https://groups.io/g/all-audio/message/294
View All Messages In Topic (6): https://groups.io/g/all-audio/topic/13950197
Mute This Topic: https://groups.io/mt/13950197/21656
New Topic: https://groups.io/g/all-audio/post

Change Your Subscription: https://groups.io/g/all-audio/editsub/21656
Group Home: https://groups.io/g/all-audio
Contact Group Owner: all-audio+ow...@groups.io
Terms of Service: https://groups.io/static/tos
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Recording multiple sounds simultaneously on a PC

[Colin Howard]

Kurtis,

I ought to have advised, Windows7, GW V5.70, Jaws V14, FireFox and two sound
cards one a RealTeck inbuilt the other can't remember.


---
This email has been checked for viruses by AVG.
http://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#292): https://groups.io/g/all-audio/message/292
View All Messages In Topic (4): https://groups.io/g/all-audio/topic/13950197
Mute This Topic: https://groups.io/mt/13950197/21656
New Topic: https://groups.io/g/all-audio/post

Change Your Subscription: https://groups.io/g/all-audio/editsub/21656
Group Home: https://groups.io/g/all-audio
Contact Group Owner: all-audio+ow...@groups.io
Terms of Service: https://groups.io/static/tos
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy
-=-=-=-=-=-=-=-=-=-=-=-

Re: [all-audio] Recording multiple sounds simultaneously on a PC

[Colin Howard]

Kurtis,

Where does one get virtual cable and how does one use in with GoldWave?

Cheers.



---
This email has been checked for viruses by AVG.
http://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#291): https://groups.io/g/all-audio/message/291
View All Messages In Topic (3): https://groups.io/g/all-audio/topic/13950197
Mute This Topic: https://groups.io/mt/13950197/21656
New Topic: https://groups.io/g/all-audio/post

Change Your Subscription: https://groups.io/g/all-audio/editsub/21656
Group Home: https://groups.io/g/all-audio
Contact Group Owner: all-audio+ow...@groups.io
Terms of Service: https://groups.io/static/tos
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy
-=-=-=-=-=-=-=-=-=-=-=-

[all-audio] When ripping disks!

[Colin Howard]

Greetings,

I have a double disk album called "The Ella Fitzgerald Collection" and when
ripping disk 1, all fine, tracks numbered and titled, album titled and
ripped successfully. Second disk, same album, "unknown album" "unknown
artist" and "track 001" . . . 00n!

I threw it at Winamp still no joy.

Can anybody please supply links for other than CDDB (I think it is) where
this may be completed?

I am using PowerToGo for ripping, which came with my Windows7 system.

Thanks!



---
This email has been checked for viruses by AVG.
http://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#244): https://groups.io/g/all-audio/message/244
View All Messages In Topic (1): https://groups.io/g/all-audio/topic/9588852
Mute This Topic: https://groups.io/mt/9588852/21656
New Topic: https://groups.io/g/all-audio/post

Change Your Subscription: https://groups.io/g/all-audio/editsub/21656
Group Home: https://groups.io/g/all-audio
Contact Group Owner: all-audio+ow...@groups.io
Terms of Service: https://groups.io/static/tos
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy
-=-=-=-=-=-=-=-=-=-=-=-

[all-audio] Talking Timer program for Windows.

[Colin Howard]

I saw this on a techy group to which I subscribe, I plan to give it a go and
am passing it on.

The text from the sender is below.

Hi All.

Some of you may know,  I'm a developer. In my spare time I also do the
odd small project, mostly audio games so far.

However a friend of mine asked me to write a talking timer program for him
and as I was quite surprised one didn't already exist I've put it up on
my website as a free download.

It's for windows and is simple to use, select count up or count down, set
how long you want it to run and hit start.

You can choose to have automatic speech as the timer runs, can choose an
initial amount of time before the timer starts, weather the voice used is
recorded or TTs and so on.

The program is freely available from

http://ndadamson.com/index.php?slab=n-a-soft-software

Just click on the talking timer link.



---
This email has been checked for viruses by AVG.
http://www.avg.com


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#217): https://groups.io/g/all-audio/message/217
View All Messages In Topic (1): https://groups.io/g/all-audio/topic/8027108
Mute This Topic: https://groups.io/mt/8027108/21656
New Topic: https://groups.io/g/all-audio/post

Change Your Subscription: https://groups.io/g/all-audio/editsub/21656
Group Home: https://groups.io/g/all-audio
Contact Group Owner: all-audio+ow...@groups.io
Terms of Service: https://groups.io/static/tos
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy
-=-=-=-=-=-=-=-=-=-=-=-