defines..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
No, I'm running off the DC power jack. Suspicious, though, that the BBB is
using 550 MHz which doesn't seem to be one of the standard speed steps.
I've wondered about that.
Sounds like a misconfigured kernel.. uname -r would help
Regards,
--
Robert Nelson
http://www.rcn-ee.com
gotten the LCD7 working recently? It's still
listed on the eewiki page as an option, so I figured it would work without
too much trouble.
It still works on the v3.7.x branch, i'm looking to re-implement it in
v3.14/v3.15 when i have free time again.
Regards,
--
Robert Nelson
http://www.rcn
to update my kernel to fix this problem.
Sorry, the fix is too generic of a term, therefore I can neither
confirm nor deny it. Either way, that 3.8 branch listed is the one
currently used in all debian/ubuntu images being shipped.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more
. WiFi setup is an obvious one i need to write
down.)
So the images are linked to from here:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-03-19
and the full changelog/tweaklog:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-03-19_Changes
Regards,
--
Robert Nelson
http
into the lcd7's port, as i never
implement that setup.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop
secondary arch for RedHat.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from
. The device actually has two eth
ports with a bunch of configuration options, so it takes the kernel a
little bit of time to configure it in the driver.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you
/xinput_calibrator_pointercal.sh
Like:
https://github.com/RobertCNelson/omap-image-builder/blob/master/target/chroot/beagleboard.org.sh#L103
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you
it.
It's fine, just reflash it:
http://beagleboard.org/latest-images
Making sure to hold down the boot button before applying power.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed
git pull
to update the xinput script..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving
gets a valid ip or the 2
minute dhcp time out. So boot times fall from the 12-15 seconds to
30ish.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
as expected.
Is there a way to run these scripts from my user account or will I have to
log in as root each time?
sudo sh -c echo 'something' /etc/privilegedfile
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received
invisible when I logout.
okay, so when i switch back to v3.8, i see this now too.. Weird, as
v3.13.x it works. Might just have to go back to the xorg.conf
workaround.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received
it to the .xsessonrc workaround
in the last week.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group
test
failed
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
wrong address: ssh 192.168.7.2
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails
On Thu, Mar 20, 2014 at 3:37 PM, Yanlong Mu ian.y...@gmail.com wrote:
The password is ?
sorry, it is my first time.
Listed on the wiki page where you downloaded it from. ;)
Also on the serial/dvi terminal right above the login prompt.
Regards,
--
Robert Nelson
http://www.rcn-ee.com
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
when either your
usb-microsd adapter is failing or a bad microSD. First try recreating
the microSD.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
of checking I can't find anything missing from the USB/SCSI
setup. So does anyone have a kernel config file for 3.14, which enables
most of the peripherals?
I actually haven't tried that in awhile, might have broke something.
(usb rootfs)
Regards,
--
Robert Nelson
http://www.rcn-ee.com
/master/tools/beaglebone-black-eMMC-flasher.sh#L39
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop
...
The script assumes a few things, so i have a couple quick system
checks, that make it stop if it doesn't recognize the system..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed
,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr
the architectures.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send
image and burn that.
Well, if your using the newer Debian images hosted here:
http://beagleboard.org/latest-images
There's a little gem, under /opt/scripts/tools/eMMC/*.sh to do what you want.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org
just rsync that does all the real work..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving
On Mon, Mar 24, 2014 at 2:29 PM, Robert Nelson robertcnel...@gmail.com wrote:
On Mon, Mar 24, 2014 at 2:26 PM, Artie Mistler rtmist...@gmail.com wrote:
I'm using Angstrom, but I'll see if I can grab that script and adapt it to
work for my case. Thanks for the reference.
- RT
It's dependent
(058f:5608)
[8.680419] usbcore: registered new interface driver uvcvideo
Any pointers will be appreciated.
Grab the latest, lots of usb fixes, 3.4.x is ancient..
http://elinux.org/BeagleBoardDebian#BeagleBoard_xM
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit
.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
changed from being ARM to x86_64, etc etc.
Anyone have any ideas as to what I'm doing wrong?
Something's overridden ARCH so just call it again aka:
make ARCH=arm menuconfig
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You
On Wed, Mar 26, 2014 at 12:50 PM, meino.cra...@gmx.de wrote:
Hi,
I have googled a lot to find a good instruction how to correctly
update the Robert Nelson kernel tree. They way I did it previously
always lead to not booting kernels after a while.
It depends on the tree
Where can I find
On Wed, Mar 26, 2014 at 1:15 PM, meino.cra...@gmx.de wrote:
Robert Nelson robertcnel...@gmail.com [14-03-26 18:56]:
On Wed, Mar 26, 2014 at 12:50 PM, meino.cra...@gmx.de wrote:
Hi,
I have googled a lot to find a good instruction how to correctly
update the Robert Nelson kernel tree
this on two SD cards and both had the same behavior.
--Mark
[1]
http://rcn-ee.net/deb/testing/2014-03-26/bone-debian-7.4-2014-03-26-2gb.img.xz
Testing now too..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received
On Thu, Mar 27, 2014 at 10:56 AM, Robert Nelson robertcnel...@gmail.com wrote:
On Thu, Mar 27, 2014 at 9:25 AM, Mark A. Yoder mark.a.yo...@gmail.com wrote:
I see a 2014-03-26 image has appeared. Unfortunately when I flash [1] and
boot from it, it appears to never leave u-boot. Just 3 LEDs
v3.12/v3.13 to fix that issue, but for some devices it's still a
problem. If you aren't using any capes (or just a simple usart/spi
ones, we have another option for you, essentially running v3.13.x)
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http
-boneblack-bak.dtb
cp am335x-boneblack-ttyO1.dtb am335x-boneblack.dtb
with: 2014-03-19
Edit: /boot/uboot/uEnv.txt
set:
CAPE=ttyO1
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed
On Thu, Mar 27, 2014 at 11:24 AM, Mark A. Yoder mark.a.yo...@gmail.com wrote:
Thanks Robert. I'll watch for the update.
Just pushed out tested locally:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-03-27
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options
:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-03-27
and the full changelog/tweaklog:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-03-27_Changes
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received
debug it, but even
the jtag interface locks up..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop
? I am hesitant to blame the LXDE X server for this
but anything is possible.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group
On Fri, Mar 28, 2014 at 9:01 AM, Riccardo Bortolato rikyz...@gmail.com wrote:
Ouch!
Is there some public bug I can subscribe to?
Not really, It's one of the main subject's in our inside weekly
meeting. When it's fixed, there will be much rejoicing on this list.
Regards,
--
Robert Nelson
On Fri, Mar 28, 2014 at 9:15 AM, Robert Nelson robertcnel...@gmail.com wrote:
On Fri, Mar 28, 2014 at 9:04 AM, Steve French of Volt Vision
voltvis...@gmail.com wrote:
Robert,
Thanks for the flurry of updated Debian images for testing (3/4, 3/19,
3/27). I am happily trying the different
-19-to-2014-03-27.sh
The only thing it doesn't do is update the bootloader from v2013.10 in
2014-03-04 to v2014.04-rc in 2014-03-19+
For that:
cd /opt/scripts/tools/
sudo ./update_bootloader.sh
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org
12126 0 - Live 0xbf048000 (O)
da8xx_fb 11448 1 omaplfb, Live 0xbf041000
pvrsrvkm 179069 1 omaplfb, Live 0xbf00 (O)
All the demos appear to run fine.
Cool! Thanks for testing, and confirming it works!
I'll make sure to set CONFIG_FB_DA8XX on the next bump.
Regards,
--
Robert Nelson
http
On Thu, Mar 27, 2014 at 3:26 PM, Robert Nelson robertcnel...@gmail.com wrote:
Thanks to everyone for testing the beta images!
In this last last week window I've rolled in many of your changes.
So please continue to use the bug tracker:
http://bugs.elinux.org/projects/debian-image-releases
On Fri, Mar 28, 2014 at 5:00 PM, Charles Steinkuehler
char...@steinkuehler.net wrote:
On 3/27/2014 3:26 PM, Robert Nelson wrote:
Thanks to everyone for testing the beta images!
In this last last week window I've rolled in many of your changes.
So please continue to use the bug tracker:
http
then work as expected.
I'm waiting for a response from systemd experts on what we can do.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group
start the shutdown process, so things like wicd-*
would get half shutdown, before systemd decides, no we can't actually
shutdown..
So just remove that file for the time being, it'll be exactly like the
previous beta's
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit
script/subject.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send
On Fri, Mar 28, 2014 at 5:00 PM, Charles Steinkuehler
char...@steinkuehler.net wrote:
On 3/27/2014 3:26 PM, Robert Nelson wrote:
Thanks to everyone for testing the beta images!
In this last last week window I've rolled in many of your changes.
So please continue to use the bug tracker:
http
On Sat, Mar 29, 2014 at 6:03 AM, Charles Steinkuehler
char...@steinkuehler.net wrote:
On 3/28/2014 5:12 PM, Charles Steinkuehler wrote:
On 3/28/2014 5:04 PM, Robert Nelson wrote:
On Fri, Mar 28, 2014 at 5:00 PM, Charles Steinkuehler
char...@steinkuehler.net wrote:
* Given the target audience
repo, so i took the original
from an older Angstrom image.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group
the readme.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
the images are linked to from here:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-03-31
and the full changelog/tweaklog:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-03-31_Changes
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http
like Angstrom) we just don't
log into that user via lxde.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group
is
not enabled.
SGX was back-ported to the 3.8 tree as of the bone41 release.
Would somebody please explain how to enable the LCD4 from Circuitco in the
new kernels(if that is currently possible).
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org
On Tue, Apr 1, 2014 at 3:09 AM, edgars.gribu...@gmail.com wrote:
I tried several times, but no result
Then use the signed drivers:
https://github.com/beagleboard/beaglebone-getting-started/tree/master/Drivers/Windows
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options
.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
to A,
they receive an ssh failure with a broken pipe. If b connects to both A and
B, then it works fine. It makes no sense to me at all. Any ideas?
What does the -v option for ssh print out for debugging?
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http
yet).
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
disappointed too! Guess i better update all my wiki
pages, and say only official CircuitCo made boards are supported.
So, SeeedStudio/Embest it's now your move to fix this issue, my
email/contact info is easily available.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http
, that file will give us a clue what's going on.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop
still default to the bootloader on the microSD card.
Wow, that's such an old and broken default image..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
On Apr 5, 2014 4:27 PM, Walter Schilling schill...@msoe.edu wrote:
Now that the Debian image has been released, has anyone placed the tools
that build that particular version into an archive somewhere so that others
can use them for building projects. I'm trying to do cross compilation of
-loader_and_U-boot
With the C4's i usually just clear the nand and trust that the microSD
has the correct u-boot vs just flashing nand.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
network connection over
(/etc/network/interfaces)
This should get you within 10-15seconds bootup time.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
or plymouth?
probally plymouth, just never personally tried..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group
partition setup.
Patches welcome:
https://github.com/rcn-ee/farm/blob/master/install-me-template.sh
I assume an initial boot partition setup like:
mmcblk0p1: fat (64M/96M)
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You
-builder/blob/master/scripts/chroot.sh#L211
If you need yours kept, add it here:
https://github.com/beagleboard/image-builder/blob/master/scripts/chroot.sh#L214
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received
On Tue, Apr 8, 2014 at 1:00 PM, michael.r...@swisscom.com wrote:
I do see the example line
cape=lcd04-01
DOH!
Blame me for having a broken default for an example..
I don't have the lcd04-01 static cape done for v3.13.x/v3.14.x yet.
Regards,
--
Robert Nelson
http://www.rcn-ee.com
,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr
/patches/dts-bone-capes/0001-capes-ttyO1-ttyO2-ttyO4.patch
For the lcd, something like this
https://github.com/RobertCNelson/linux-dev/blob/am33x-v3.14/patches/static-capes/0002-Added-Argus-UPS-cape-support-BBW.patch
essentially creating another board dtb..
Regards,
--
Robert Nelson
http
/sbin/getty
115200 ttyO0
ubuntu 772 0.0 0.1 3116 712 pts/0S+ 19:24 0:00 grep
--color=auto tty
8. I tried to disable the HDMI interface but couldn't find a way that would
work.
Add to your bootargs:
capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN
--
Robert Nelson
http
,00A0,Texas Instrument,BB-BONELT-HDMI
So this doesn't appear to work.
Is it correctly passed to the kernel? verify with:
cat /proc/cmdline
Regards
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you
,
instead of QtCreator on PC as usual ?
Debian is using the armhf abi, so make sure your cross compiler is
of the gnueabihf variety..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed
or give some advice?
The partition shown over the usb interface is defined in:
/opt/scripts/boot/am335x_evm.sh
https://github.com/RobertCNelson/boot-scripts/blob/master/boot/am335x_evm.sh#L71
file=${gadget_partition}
So if you want to pass a usb flash drive, use: file=/dev/sda1
Regards,
--
Robert
parted (from .../parted_2.3-12_armhf.deb) ...
Processing triggers for man-db ...
Setting up parted (2.3-12) ...
Did you change LANG yourself? Or i wonder if the script is copying
your build LANG settings???
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http
}
Just comment it out to disable..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails
/92793/
btw, systemd provides a nice tool to help debug this:
systemd-analyze
Using:
systemd-analyze blame
http://paste.debian.net/92798/
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you
On Wed, Apr 9, 2014 at 7:36 PM, Sungjin Chun chu...@gmail.com wrote:
After upgrade to Kernel 3.14 (Arch Linux ARM) which uses
http://rcn-ee.net/deb/sid-armhf/v3.14.0-bone0/
I cannot find uio_pruss kernel driver.
How can I fix this?
Did you enable it in the config?
--
Robert Nelson
http
/beagleboard.org.sh#L109
Disable the lightdm service, then it shouldn't start on bootup.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe
On Fri, Apr 11, 2014 at 10:30 AM, xdong...@gmail.com wrote:
May I ask where do you find run_boot-scripts? I'm working on a BeagleBone
Black and I can't find this file.
/boot/uboot/run_boot-scripts
btw, i've nuke that file interface on later images..
Regards,
--
Robert Nelson
http://www.rcn
there is one line to setup the port. Can I
change it there? will it work?
Yeap, but also /etc/network/interfaces... (don't ask why i do it in
both places..)
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received
.
Perhaps I should compile the kernel from the source I have downloaded,
install it and then recompile against that.
Is there a written procedure for installing a compiled Debian kernel on the
BBB?
Any insight on this would be appreciated.
Regards,
--
Robert Nelson
http://www.rcn-ee.com
-dev/blob/am33x-v3.8/patch.sh#L706
It probably fixes an issue when built inside Angstrom.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group
during the procedure. Any random
loss of power will make the script fail.
Like the directions say, only connect dc power, no capes, no usb
devices, (ethernet is fine), to guarentee 100% flashing.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org
, just disables removing the pre-compute-locale
info, we still only generate one locale.
If you want them all, also add: locales-all to the package list..
Of course, It'll cost you about 120MB of space..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http
On Mon, Apr 14, 2014 at 11:22 AM, mac...@msn.com wrote:
Hi All,
Here's my latest update regarding building a 3.13.9-bone9 bootable image.
Again, I want to thank Robert Nelson, Jason Kridner and everyone that has
contributed to the BBB/Debian effort. This was a big improvement for me.
I did
-offsets.s
lib/asm-offsets.c:1:0: error: bad value (armv5) for -march= switch
make[1]: *** [lib/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
Thus you never set CC to the cross compiler referenced..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http
is not supported
[ 1349.396415] usb 2-1.2: device v0a5c p4503 is not supported
[ 1349.606618] usb 2-1.3: device v0461 p4d75 is not supported
That looks like you didn't copy the modules to the rootfs..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org
new comment, just makes those pages worse. That's why
I moved the comments into their own pages about a year ago. The mysql
server really struggles with them. I'm tempted to start purging
old-outdated comments.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http
partition. Your windows machine doesn't understand what it's
seeing.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from
see a 70mb boot partition and a 3.7GB root partition. Use
gparted to expand the 2nd 3.7GB root partition.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
On Mon, Apr 14, 2014 at 3:18 PM, JBodine jbodine90...@gmail.com wrote:
Ok, I don't want to beat this to death but what about the other 10gb?
Use gparted to expand the 2nd 3.7GB root partition to the full
disk size...
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options
.)
So.. remove what you don't need or use a big microSD card.
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from
#2014-04-14
and the full changelog/tweaklog:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-04-14_Changes
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
On Tue, Apr 15, 2014 at 12:03 PM, Jason Kridner jkrid...@gmail.com wrote:
On Tue, Apr 15, 2014 at 12:55 PM, Robert Nelson robertcnel...@gmail.com
wrote:
Here we go... Last chance! ;)
New Capes:
universal cape, weather 2, cryto (once boot, install tpm-tools)
So please continue to use
601 - 700 of 6771 matches
Mail list logo
