Which grinder?
On Monday, August 17, 2020 at 6:03:13 PM UTC-4 herman...@gmail.com wrote:
> I also got mine in 2005. I got a Gs3 in 2015 I think, whenever the new
> conical valve was released, in December just like the Brewt. I love the Gs3
> but there's not enough difference in the espresso to
Does anyone have the instructions to drain the boilers?
--
You received this message because you are subscribed to the Google Groups
Brewtus group.
To unsubscribe from this group and stop receiving emails from it, send an email
to brewtus+unsubscr...@googlegroups.com.
To post to this group,
The sensor is located in the thermowell and the thermal compound
probably has hardened.
Wait for Ira's response but you should probably just tape with heat
resistant electrical tape.
On May 19, 9:36 am, Fred festr...@gmail.com wrote:
Hi Ira,
Thank you for your quick response. I checked the
Could be the temperature sensor in the boiler, a cheap but difficult
part to locate.
Which Brewyus do you have?
On May 18, 8:42 pm, Fred festr...@gmail.com wrote:
Hi everybody,
I have a problem with my temperature controller installed in my
Brewtus I and hopefully you can help me guys. Once
Must be an overloaded circuit.
On Apr 7, 6:17 pm, pcdaw...@ucalgary.ca pcdaw...@ucalgary.ca
wrote:
Hello Everyone,
For the past little while, I've been posting messages asking for help
with an issue I noticed with my vibe pump pulsing. Alas, no responses
to my questions. However, the plot
It draws water from the steam boiler. The steam boiler runs hotter
thus the drop in temperature.
The solids in the water aren't coffee grinds. It should be scale and/
or minerals.
On Apr 3, 1:06 pm, Cindy Goddard bigstormg...@gmail.com wrote:
Hello everyone
This morning I turned on my water
What about your grinder? tamper? water quality? dosage? I presume you
use the same beans.
You've got the right idea to take your machine over there.
If it comes down to the machine it shouldn't be a surprise.
On Mar 27, 8:38 pm, Dan Hagelin danhage...@gmail.com wrote:
Kitt,
Thanks for your
Electrical problems? Maybe time to think outside the box?
On Mar 17, 8:59 pm, dustin dustin.lip...@gmail.com wrote:
I searched the previous posts and could not find an answer to my
issue...hopefully the wisdom of this group can prevail. My brew
pressure is erratic. I replaced the pump,
I haven't had a problem prying out the screen and gasket with a stubby
flathead screwdriver. The screen gets a bit scratched sometimes but
I've yet to destroy one.
On Mar 15, 8:50 pm, Benjamin McCafferty bmacpi...@me.com wrote:
Same post mentioned below I describe the process. I'll try to find
My part is AKO-14901
On Jan 17, 8:29 pm, badhabit...@yahoo.com wrote:
At this point I'm really wondering what's coming :)
Sent from my U.S. Cellular BlackBerry® smartphone
-Original Message-
From: Dennis Keating dennis.keat...@comcast.net
Sender: brewtus@googlegroups.com
Date:
and it was shipped next day.
I should've chose Canadian post.
On Jan 13, 11:51 am, Orianm42 combs@gmail.com wrote:
I've got a spare temp probe. Contact me directly and I will ship it
to you.
R combs
On Jan 1, 9:52 pm, TWG tho...@glasgow.org wrote:
I think the white stuff is some kind of thermal
considered it but wll was out of the
pid kit. anyway good luck with your repair.
herman
From: TWG tho...@glasgow.org
To: Brewtus brewtus@googlegroups.com
Sent: Sun, January 16, 2011 9:02:16 PM
Subject: Re: E1 on power up
Thanks for the offer.
I had already
Does anyone have instructions on descaling?
On Dec 4 2010, 8:20 am, Todd Salzman to...@wholelattelove.com
wrote:
Hey Dan,
Can you please e mail me your phone or use my cell number (will send in a
private e mail) number so we can talk. A conversation would be much better
than a stream of e
Happy New Year all!
Unfortunately Brewtus II is suffering a hangover. I turned the
Brewtus on and it displayed an E1 error code.
The steam boiler heats up but appparently not the brew boiler. The
steam boiler sends out hot water, but the brew group water is only
luke warm.
I suppose the first
I think the white stuff is some kind of thermal compound like that
listed at espressoparts.com.
On Jan 1, 10:20 pm, TWG tho...@glasgow.org wrote:
I'm sure you're right. I was able to pull out the temp sensor with
brew boiler cold.
Also when jiggling the wire the error code had gone away
Partly depends on whether you'll only do espresso or cappuccino, etc.
In addition, I'm not sure I rely on a comparison based on how
commercial units are designed for a home machine.
I think it really comes down to implementation, but you're not likely
to find a consumer who's extensively used 3
Thickness can depend on which portafilter, try the search function.
On Oct 28, 4:00 pm, Bruce Keeler br...@drangle.com wrote:
I believe it's 8.5mm. At least that's what I ordered last time, and it
fit fine.
On 10/28/2010 12:41 PM, Jean-Sebastien Morisset wrote:
Hey guys,
Looking to
What's the recommended home roasting machine?
And are there good sources for roasting information?
On Apr 9, 2:40 pm, Barry Luterman luterm...@gmail.com wrote:
Jean the next step is getting you into home roasting
On Thu, Apr 8, 2010 at 5:55 PM, Jean Chachere jchach...@cox.net wrote:
Whole Latte Love's website is down
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups
Brewtus group.
To post to this group, send email to brewtus@googlegroups.com
To unsubscribe from this group, send email to
Search this group with the terms: Calibrating Brew Pressure
This should help clarify the difference between the pressure shown on
the Brewtus guage versus the pressure in the portafilter. 11.5 on the
Brewtus guage may be a bit high but not way out of line.
On Jan 28, 10:36 pm, Chris Bailey
20 matches
Mail list logo
