Not seeing the draft, which I know is important to you.
Looks really nice. I think you just need to go look at it, then you can
tour the maritime museum. And the thousand Islands.
Why Knot?
\
Bill Coleman
Erie PA
On Thu, May 30, 2024 at 3:57 PM Della Barba, Joe via CnC-List <
cnc-list@
Practical Sailor June Issue is all about waterlines and stripes!
I used 3M 1/2" reflective tape for the cove stripe, 1" for the waterline,
and it looks really sharp, especially in low light.
Bill Coleman
Entrada, Erie PA
On Wed, May 29, 2024 at 8:59 AM John McCrea via CnC-List <
I used 1/2" Lexan, (Tuffak) for both hatch board and sliding hatch cover.
Coincidentally, I just came across a couple pieces that I never used, that
I was thinking of putting on EBay - Let me know what sizes you need off
list.
Lexan is handy if you think anyone might be shooting at you.
I've got some stuff, not really sure what it is but I think it is 9/16 &
with a dynema core and a nice grippy cover. It's nice because there's no
stretch.
Bill Coleman
On Sun, May 26, 2024, 11:05 Bob Mann via CnC-List
wrote:
> I snapped a jib sheet on my 35 Saturday. Suggestions
with that type of outhaul.
Bill Coleman
Entrada, Erie PA
On Thu, May 23, 2024 at 1:13 AM CHARLES SCHEAFFER via CnC-List <
cnc-list@cnc-list.com> wrote:
> Our C 34R came with a short wire outhaul that we added a 4:1 purchase
> that lives inside the boom. A 3/8" line exits the goosnec
Whoops, sorry, that went flying out of here before I was done reviewing -
should say rather than two 12V in Series.
On Mon, May 20, 2024 at 12:31 PM Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:
> Wondering if the electrically savvy in the group have a feeling as to
Wondering if the electrically savvy in the group have a feeling as to
whether it makes more sense to use 24V Batteries in Parallel rather than
two in series. My gut tells me that plain 24V would make more sense, but
this is not my area of expertise.
Thanks
Bill Coleman
Please show your
It might have to do with how ablative it is - I am using Petit Odyssey
Trinidad, which is considered ablative, but tough enough to take a mild
pressure washing and still be good. I would say if they let you do the
pressure washing, you can see how it is going.
Bill Coleman
Entrada, Erie PA
Nice Review in Practical Sailor on the C 40
https://www.practical-sailor.com/sailboat-reviews/cc-40-still-turning-heads?MailingID=1633=GB20240426-FixItAndSail=email_source=ActiveCampaign_medium=email_content=C%26C%2040%20Used%20Boat%20Review_campaign=GB20240426-FixItAndSail
Bill Coleman
Please
In addition to what Chuck says, Maybe check your quadrant, sometimes the
Rudder can slip down - see if it may be rubbing on the top of the housing -
or maybe on the top bearing, if there is one.
Bill Coleman
On Wed, Apr 17, 2024 at 11:11 AM Ryan Anderson via CnC-List <
cnc-list@cnc-list.
Interesting DIY in Epoxyworks about rebuilding a waterlogged C 32 Rudder.
https://www.epoxyworks.com/index.php/replacing-wet-core-in-rudder/?utm_source=newsletter_medium=email_campaign=EW_58_content=another-spade
Bill Coleman
Erie, PA
Please show your appreciation for this list and the Photo
bucks earlier, so the whole thing is a rather sore
subject.
Bill Coleman
Erie PA Entrada
On Mon, Apr 15, 2024 at 11:48 AM Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
> The deal with Dyneema is supposedly it is only expensive ONCE, the
> fittings can be reused an
savings, when I could have replaced it with rod myself
for next to nothing.
Bill Coleman
Erie PA Entrada
On Mon, Apr 15, 2024 at 9:51 AM Karl Erickson via CnC-List <
cnc-list@cnc-list.com> wrote:
> Has anyone looked into replacing their standing rigging with Dyneema? I am
> in the process
Only thing is, I don't see anywhere in that ad where is says the trailer is
included - Maybe he is just showing it to show he can move it.
Bill Coleman
On Fri, Apr 12, 2024 at 2:22 PM Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:
> https://delaware.craigslist.org/bod/d/w
Couple of years ago, at winterization time, I unscrewed the cap on My
Engine Groco Filter and found a perfect little bass just through the input
laying on the screen! I couldn't believe he got pulled through that far!
Bill Coleman
Erie PA
On Mon, Apr 8, 2024 at 11:42 AM Matthew Wolford via CnC
On Fri, Apr 5, 2024 at 2:44 PM Bill Coleman wrote:
> I anguish over this nearly every race, and one thing I can tell you is
> that whichever choice you decide, you will wish you did the other!
>
> Bill Coleman
> Erie, PA
>
>
>
> On Fri, Apr 5, 2024 at 1:48 PM David
r old drums on the ebay bases, and then
sell them on ebay for 400, 300 ea, whatever - and Bob's your uncle!
Bill Coleman
Entrada, Erie PA
On Sun, Feb 25, 2024 at 8:23 PM Rick Brass via CnC-List <
cnc-list@cnc-list.com> wrote:
> I was sort of planning to use part of this year’s tax ref
in
the manual to put something like 10 or 12 oz of oil in before charging, I
figured well, they would have done that already. And before the Summer was
out, it had lost its charge. Next year, I put the oil in, and voila still
stiff as.. it needs to be.
Bill Coleman
On Thu, Feb 15, 2024, 12:14 Glenn
the time is now.
Bill Coleman
On Thu, Feb 15, 2024, 12:34 Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:
> I recently got a big AGM battery that needs a big charger. I have a
> ProNautic 15 amp charger with a battery temperature probe that is necessary
> for correct
Yep, take a C 39, multiply all the dimensions by 1.69, and you've got a
C 66
Bill Coleman
On Tue, Jan 16, 2024, 19:49 CHARLES SCHEAFFER via CnC-List <
cnc-list@cnc-list.com> wrote:
> Beautiful boat but she's priced pretty high. I'd like to see her keel,
> probably a big shark fin.
buddy's bent C Rudder.
Bill Coleman
On Mon, Dec 11, 2023 at 5:12 PM Matthew Wolford via CnC-List <
cnc-list@cnc-list.com> wrote:
> Richard:
>
>
>
> When you spoke with Rob, did you ask if he knows the diameter/thread size
> of the top of the rudder post for that boat? He used
on the rip
rap. His insurance bought him a new rudder, I think from South Shore. He
offered me his Bent one, and oddly I didn't take it, or I would still have
it like everything else and I I could tell you what you need.
Bill Coleman
On Sat, Dec 9, 2023, 15:05 Chris Riedinger via CnC-List <
cnc-list@
I thought there was a nut on the top of the post. If so, it may have come
off and it slipped down till the quadrant hit the hull. Obviously you are
going to have to go down an look, and all things shall be revealed unto you
Bill Coleman
Erie PA
On Thu, Dec 7, 2023 at 3:15 PM Richard Bush via
This looks like a nice article written by a canvasperson who is also a
sailor -
A darn good combination.
https://marinefabricatormag.com/2023/08/31/sailor-friendly-sailboat-dodger-designs/
Bill Coleman
Erie PA
Please show your appreciation for this list and the Photo Album site and help
me pay
the
sunlight as Dennis suggested
Bill Coleman
On Fri, Nov 17, 2023, 18:49 paul.hood via CnC-List
wrote:
> Went to a specialty hydralics shop to get mine fixed. They couldn't
> don't. Went elsewhere and they did fine. Still wasn't cheap. Done work on
> the 2 hydralics and the pump.
>
Will Sailtec rebuild it? I have had good luck communicating with them,
Kevin Savitt has been more than helpful for a number of problems I have had
- ksav...@sailtec.com
I know you can buy spare parts from them, and I think their hydraulics are
very good quality.
Bill Coleman
Entrada, Erie PA
Coleman
On Wed, Nov 15, 2023 at 11:53 AM Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:
> Absolutely yes to cloth coverings on the fenders, and the softer fabric is
> better -
>
> Bill Coleman
>
> On Wed, Nov 15, 2023 at 11:24 AM David Knecht via CnC-List &
Absolutely yes to cloth coverings on the fenders, and the softer fabric is
better -
Bill Coleman
On Wed, Nov 15, 2023 at 11:24 AM David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> I had my boat painted a few years ago with Awlcraft 2000. I find that I
> am getting a
Is it a VF Shaw Chutescoop?
Bill Coleman
On Sun, Nov 12, 2023, 18:51 Dennis C. via CnC-List
wrote:
> Always an interesting topic. True, conventional wisdom says end for end
> (EFE) up to 35 feet. Also agree EFE is faster. Don't disagree that dip
> pole (DP) gybing is safer.
in, out, and up, and also have fold down flaps to
stabilize it up to 12' wide. Really well thought out.
Bill Coleman
Erie PA Entrada
On Wed, Oct 18, 2023 at 10:19 AM Hoyt, Mike via CnC-List <
cnc-list@cnc-list.com> wrote:
> Re mast up. A friend stored his C 33-2 with mast up and it blew
Is your anti freeze low?
Bill Colelman
On Thu, Oct 26, 2023 at 3:28 PM Doug Mountjoy via CnC-List <
cnc-list@cnc-list.com> wrote:
> There was enough water to turn the oil to chocolate milk. Could be
> condensation, there was a couple of nasty storms that came through here
> this summer. I'm in
to
the main line of the boat. Like me, it has no memory, and comes off easily
with no indentation.
Bill Coleman
Erie PA, Entrada
Bill Coleman
On Sat, Oct 21, 2023, 21:10 David Knecht via CnC-List
wrote:
> Hi Bill- I have a portable DeWalt vac/blower which I love for these jobs.
> It runs
, never knew it was there.
Bill Coleman
Erie PA
On Fri, Oct 20, 2023 at 9:36 AM Leeward Rail via CnC-List <
cnc-list@cnc-list.com> wrote:
> Wet vacs are great. Especially on a boat. I use a Rigid Brand 18v
> cordless one for the boat. Small and easily fits in a cockpit locker
I believe this,
My Microwave went this summer with a big bang. I can't remember if it was
at the dock or on the Inverter, but I wouldn't be at all surprised if
shitty AC could have degraded it.
It was a pretty nice one too. My next Inverter/Charger will be true Sine
Wave.
Bill Coleman
On Tue
and try some of this!
https://hamiltonmarine.com/hmbuoypaint/
Bill Coleman
Erie PA
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu
quickly - like a trailer behind me.,
Bill Coleman
On Wed, Sep 13, 2023 at 10:17 AM Karl Kuzis via CnC-List <
cnc-list@cnc-list.com> wrote:
> Looking at Richard's photos from moving his 34cb to the shop got me
> thinking.
>
> Firefly is a C 29 Mk1 with extended keel which is
Yep.
A pair of Barient 32 ST, look like SS. $2,500. I think that is a sweet
deal.
I paid 2K over 10 years ago for a pair of those, and was thrilled to get
them.
Currently spoiled to death with Harken Electric 66 3 speed Primaries
Bill Coleman
Entrada Erie PA
On Tue, Sep 12, 2023 at 6:11 PM
When I had my 39 hauled out to the shop for a refit, we hit a traffic
signal on the way out. I saw them working on it a few days later.
Then at the busiest intersection, they had to stop kind of fast, the bilge
water rushed forward and started pumping out onto a convertible next to it!
Bill
bits on my boat that have little vinyl repairs that are very hard to find.
Bill Coleman
On Wed, Aug 23, 2023 at 1:04 PM Richard Bush via CnC-List <
cnc-list@cnc-list.com> wrote:
> Karl, that's exactly my concern...I would like to have seen photos of
> that! Thanks
>
> Richard
>
Those Wraps are intriguing, does anyone know what is involved in removing
them?
Bill Coleman
Entrada, Erie PA
On Tue, Aug 22, 2023 at 10:43 PM Karl Erickson via CnC-List <
cnc-list@cnc-list.com> wrote:
> A dock neighbor had just 1973 C$C 33 wrapped last year. Half the cost and
&
What kind of paint?
Bill Coleman
Erie PA
On Tue, Aug 22, 2023 at 1:34 PM George Cone via CnC-List <
cnc-list@cnc-list.com> wrote:
> One detail, I have / had a 1981 c 40 white, I had a quart of special
> paint made to do some patching. Unfortunately the boat was hit by lightn
Hello Pete,
I don't have one, I just know a couple people who do. (Above, - - but I
don't see one in my future. )
The one who put it in his trawler sold it to a friend, and his (new) wife
made him go back to the holding tank
Bill Coleman
On Thu, Aug 17, 2023 at 8:58 PM Peter McMinn via CnC
Are you sure it is coming from the CB and not the stern? We get some pretty
hard THUNKING sometimes when there is a following wind, even in the slip if
the little wave hits just right under the stern.
Bill Coleman
Erie PA
On Mon, Aug 14, 2023 at 11:14 AM Richard Bush via CnC-List <
cnc-list@
Does anyone have any experience with these clutches?
https://www.velasailingsupply.com/ronstan-constrictor-textile-rope-clutch-single-14mm-rope/
Thanks,
Bill Coleman
Erie PA
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make
extricated myself.
Bill Coleman
Former C 39
On Sun, Jul 23, 2023 at 12:11 PM Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:
> I am running the propane hose for my new stove down the starboard side of
> the boat, which is requiring me to crawl back to the stern
eside", but with an approved male
30 amp plug, not a household plug. I am just not going to magically get
air conditioning out of a couple same phase 120 volt pedestals.
Thanks again everyone,
Bill Coleman
On Sat, Jul 22, 2023 at 8:09 AM Doug via CnC-List
wrote:
> You can get 240
Thanks Peter, but it was the 30 amp 125 volt male to a 125/250 female that
I was looking for. I have a 125 /250 to a 15 amp for battery charging
Bill Coleman
On Fri, Jul 21, 2023, 17:59 Peter Fell via CnC-List
wrote:
> Unless you're cruising in Europe or UK (or a few other countries) you
to
charge batteries in the winter.
Thanks,
Bill Coleman
Entrada, Erie PA
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu
Just got this in a newsletter from the local broker, it does a little more
Plain 'Splainin on the subject of boat insurance.
<< At the YBAAU, we had an excellent presentation by Bob Peck of Triton
Marine Insurance. If you currently own a boat, you almost certainly noticed
a sizable increase in
, that doesn't sound too quiet.
Bill Coleman
Entrada, Erie PA
On Thu, Jul 20, 2023 at 2:23 PM Doug Mountjoy via CnC-List <
cnc-list@cnc-list.com> wrote:
> I have a question for the group. Does anyone have experience with the
> Seaflo brand of bilge blowers or pumps? I need to replace a bl
heavy rain and drain the pan to keep the bilge dry. Works great!
Bill Coleman
Entrada, Erie PA
On Sun, Jul 2, 2023, 21:33 Dean McNeill via CnC-List
wrote:
> Thanks all… some great ideas!
> Dean
>
> On Jul 2, 2023, at 9:58 PM, John Read via CnC-List
> wrote:
>
> On my 34 w
, and they used to be C Dealers!
Bill Coleman
Erie PA Entrada
On Sat, Jun 10, 2023 at 9:29 PM Thomas Perison via CnC-List <
cnc-list@cnc-list.com> wrote:
> Greetings all -
>
> I completed the 720nm trip at 1230 today, pulling into my slip at RCR
> Marina in Buffalo.
>
>
Let's just be thankful we're not flying airplanes!
Bill Coleman
On Sun, Jun 11, 2023, 09:42 Korbey Hunt via CnC-List
wrote:
> I have a 1980 34 C located in Ketchikan, AK. I only use it in the
> summer. It has a new Yanmar 30 hp engine with 300 hrs. Last year when
> returning fr
I use a First Alert GC01
Plug it in at home during the off season, move it down to the boat in the
summer.
CO2, Methane, Propane.
When away from the dock it runs on 9V Battery
Bill Coleman
Erie PA
On Wed, May 31, 2023 at 1:23 PM Doug Mountjoy via CnC-List <
cnc-list@cnc-list.com> wrote:
You are lucky you are going to Buffalo, a friend of mine is stuck for 3
weeks at Brewertons, just out of Onida (a nice layover) as a bridge is out
going down the Oswego leg to Ontario.
Bill Coleman
Erie PA
On Sun, May 28, 2023 at 4:15 PM Thomas Perison via CnC-List <
cnc-list@cnc-list.com>
also help if available.
Bill Coleman
Entrada, Erie PA
On Wed, May 17, 2023 at 10:42 AM Charlie Nelson via CnC-List <
cnc-list@cnc-list.com> wrote:
> I am thinking of getting 2 gallons of bottom paint currently on sale at
> Defender/West Marine (Oydessy HD) that I may not need
ing. He plans to pull it tomorrow to confirm. I talked briefly with
> Bill Coleman on this list, and he suggested replacing the aluminum tank
> with a plastic tank. Does anyone know a source for a plastic replacement
> diesel tank that will fit this boat? (I a
+feeder=1682090312=lubesite%2Caps%2C82=8-2
Bill Coleman
On Fri, Apr 21, 2023 at 8:24 AM Korbey Hunt via CnC-List <
cnc-list@cnc-list.com> wrote:
> Thanks. I bought a zerk fitting to add to the grease cup. The idea of a
> hose extension is a good one. I was thinking some shaft pack
AwlGrip I believe is a polyisocyanate. Awlcraft is a polyurethane.
Think diamonds vs. Granite. I also need to do some touch up on AwlGrip,
and I intend to just touch it up with Awlgrip and wet-sand and buff. If I
can ever figure out which color it is.
Bill Coleman
On Thu, Apr 20, 2023 at 11
just the short trip from the lift well to my slip with the spar laying
down. I once caught the top of the spar on the sling cables backing out
with my 39 in a crosswind, and almost ripped the mast off the boat.
https://pilgrimliberty.wordpress.com/2018/05/page/2/
Bill Coleman
Entrada, Erie PA
to go out on this thing on open water. Think, tiger King.
Bill Coleman
Entrada, Erie PA
On Tue, Apr 18, 2023, 20:05 Dennis C. via CnC-List
wrote:
> Long weekend. Took Touche' from its home slip in Mandeville, LA to
> Pensacola to get bottom paint and topsides touchup.
>
> Friday -
and everyone else's price for the
Pettit Triton out of the water. Of course the Blue is back-ordered, but I
am a patient man. The sale ends tonite, BTW.
Bill Coleman
Entrada, Erie PA
On Sat, Apr 1, 2023 at 8:20 PM ALAN BERGEN via CnC-List <
cnc-list@cnc-list.com> wrote:
> Don't accept
Another interesting way to ship awkward stuff like that is via Greyhound!
Bill Coleman
On Wed, Apr 5, 2023 at 5:32 PM Randy Stafford via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi Chuck,
>
> Yes, we saw a bunch of kiteboarders and windsurfers on the sound side of
> Hatte
it back, and have it resent. Not a happy camper. I
think the once loyal employees are quiet-quitting from the new hedge fund
owners. I have been buying from them since I was a kid in the sixties when
they were selling mostly fiberglass and polyester. . So much for that.
Bill Coleman
Erie PA
Are you referring to the top or lower lifeline? In the older boats the top
was a cast bronze eye, with, I think a half inch od X 16 ga. Tube bushing
for the lower -
Bill Coleman
On Mon, Mar 20, 2023, 20:04 Dave S via CnC-List
wrote:
> I have replaced Windstar's (33-2) lifelines, and n
Yes! It's like flying, anybody can take off in a plane, but landing is
another story.! When he first launched it, he almost ran the drone into the
leech. I would think they would buy one of those splash drones that can
survive in water.
Bill Coleman
On Sat, Mar 18, 2023, 18:08 Tom Buscaglia via
That is freaking incredible. My resistance to purchasing a drone is
waning.
Bill Coleman
Erie PA
On Sat, Mar 18, 2023 at 3:05 PM CHARLES SCHEAFFER via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi,
> I've been following the IMOCA foilers every day. The coverage has been
> spect
-W96WP-12-sq-ft-White-Vinyl-Reversible-Interior-Exterior-Paneling-3-Piece-Per-Pack-W96WP/205437105
Bill Coleman
On Mon, Mar 13, 2023 at 4:48 PM John McCrea via CnC-List <
cnc-list@cnc-list.com> wrote:
> Great idea, Thanks.
>
>
>
> *From:* ALAN BERGEN via CnC-List
>
Ditto on the Green. The further you get from centerline and keel, the more
distorted your readings are likely to be.
Bill Coleman
On Mon, Mar 13, 2023 at 3:03 PM Matt Wolford via CnC-List <
cnc-list@cnc-list.com> wrote:
> The depth sounder on my 42 Custom is approximately where y
the drum.
Bill Coleman
On Sat, Mar 11, 2023, 17:40 Dave S via CnC-List
wrote:
> David - I sail windstar singlehanded a lot, and don’t have a self tailing
> halyard winch. Just use a line clutch. I raise it by hand, and finish
> with the winch, tailing it myself. I have a bank of
is the layers of distribution that add percentages on percentages
to the cost. Some of these layers have been removed in the last 40 years,
but it is still a burden.
Bill Coleman
Entrada Erie PA
On Sat, Mar 11, 2023, 15:19 John Read via CnC-List
wrote:
> I seem to recall Jamestown clo
West Marine, is ebbing.
Does anyone have any favorites for Parts, like BOE Marine, Go2Marine,
etc? I can't find my bottom paint for less than $395 A Gallon. Even
Fishermen's supply is not that great anymore.
Bill Coleman
Entrada Erie, PA
Please show your appreciation for this list and the Phot
it all the way off and still can't get the cup out of the leech. I am
afraid if I take it off I will be stuck with sticky crap that I cannot
remove.
Bill Coleman
Entrada, Erie PA
On Thu, Mar 2, 2023 at 10:57 AM Jeff Nelson via CnC-List <
cnc-list@cnc-list.com> wrote:
> Also has th
to
just do the job the first time.
Just sayin.
Bill Coleman
On Thu, Mar 2, 2023 at 9:59 AM Richard Servance via CnC-List <
cnc-list@cnc-list.com> wrote:
> I just had North replace the UV cover on my 135%. It was a boat buck
> ($1k). Hadn't heard of the sock method; so not sure i
boat paint? Wonder how long paint lasts on a sail?
>
>
>
> C
>
> On 03/01/2023 8:55 AM Bill Coleman via CnC-List
> wrote:
>
>
>
>
>
> I thought we resolved this problem last year. Didn't the general consensus
> come out that the best solution is using inf
I thought we resolved this problem last year. Didn't the general consensus
come out that the best solution is using inflatable boat paint to paint the
UV protection on?
Bill Coleman
Entrada, Erie PA
On Wed, Mar 1, 2023, 08:46 Marek Dziedzic via CnC-List <
cnc-list@cnc-list.com> wrote:
Not sure which model you are referring to, but most often they are just
ahead of the keel, but off to one side several inches, usually SB, I think
. There should be a section adjacent to the centerline where it is solid
Glass before it goes up onto the balsa.
Bill Coleman
Entrada, Erie PA
Ditto on the Sawzall, Vertically.
Bill Coleman
On Mon, Feb 20, 2023 at 12:01 PM John Heaton via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi folks - I’m looking to remove my original Data Marine instruments and
> wow did they find the most difficult place to install the dep
. Little did I know then that ammonia and chlorine creates
mustard gas! Live and learn!
Bill Coleman
On Wed, Feb 15, 2023, 21:58 Matt Wolford via CnC-List
wrote:
> My friend Bill Coleman on this list cautioned me against using Clorox in
> the bilge for fear of damaging the stainless keel
I thought most of the showers and these boats are just faucets that you
pull out on a hose and hang on the wall
Bill Coleman
Erie PA
On Wed, Feb 15, 2023, 12:23 Paul Hood via CnC-List
wrote:
> That’s interesting that all those 34’s have showers…never knew. I have a
> small hole in the
Nice Job on the Bow mod - I see something similar in my future.
Are you happy with the style of your Spinnaker attachment? I have to say I
have never seen one quite like that.
I can see that you don't have to lean over so far -
Bill Coleman
Entrada, Erie PA
On Tue, Jan 31, 2023 at 2:31 PM
in the
water, level, and when they start messing with that, water pools where it
shouldn't . They start rolling their eyes when I pull out my level, and
start putting it on the waterline to try and get it level.\
Bill Coleman
Entrada, Erie PA
On Thu, Jan 26, 2023 at 1:51 PM rjcasciato--- via CnC
lush-mount
>
>
>
> *From:* Bill Coleman via CnC-List
> *Sent:* Thursday, January 19, 2023 5:24 PM
> *To:* Stus-List
> *Cc:* Bill Coleman
> *Subject:* Stus-List Re: Thru Hull
>
>
>
> Interestingly, Buck Algonquin seems to have been purchased by Deep Blue.
&
the bevel on the inside, if the OD is right. I am assuming
that is 1" NPS, by your scale.
Bill Coleman
Entrada, Erie PA
(former C 39)
On Thu, Jan 19, 2023 at 3:30 PM Bill Coleman via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Actually, it looks more like it would be the 00th1
Actually, it looks more like it would be the 00th100f, with the F meaning
Flush..
Fisheries Supply has a lot, but I don't see this one.
For some reason I think C used Buck Algonquin for a lot of their bronze
stuff.
Bill
On Thu, Jan 19, 2023 at 3:05 PM Bill Coleman via CnC-List <
cnc-list@
Looks like a Buck Alqonquin # 00thh100 1'' 1'' 3-1/4'' 2-3/8'' .80
Bill Coleman
Entrada Erie PA
On Thu, Jan 19, 2023 at 12:13 PM Tom A via CnC-List
wrote:
> Hello all,
>
> I had to replace my stbd cockpit drain Seacock and unfortunately could not
> save the thru-hull fitting. I
.
If you want to keep things simple, I would think a single mast attachment
would be fine.
Bill Coleman
Entrada, Erie PA
*To:* cnc-list@cnc-list.com
> *Cc:* and...@apwengineering.com
> *Subject:* Stus-List C Symmetrical Spinnaker
>
>
>
> Good day,
>
> I finally found a pole
That must have been quite a sight! Was it balanced, sitting in the mud?
Seems like that could have been a whole lot worse.
Bill Coleman
On Wed, Jan 11, 2023, 15:00 Tim Rutherford via CnC-List <
cnc-list@cnc-list.com> wrote:
> Looking for a lead to buy salvage stern chocks for a 19
could squeeze a bronze
bushing in.
Bill Coleman
Entrada, Erie PA
On Mon, Jan 9, 2023 at 1:30 PM david coleman via CnC-List <
cnc-list@cnc-list.com> wrote:
>
>
> Hello ,
>> After many decades of service our bottom rudder piton attachment
>> failed.We are looking for a s
I replaced mine for precisely the same reason.
It had a track along the bottom which was nice for mounting the vang and
mainsheet.
I put a 6 part set of blocks inside the back end for the outhaul purchase,
works great, no regrets.
Bill Coleman
Entrada, Erie PA
On Thu, Jan 5, 2023 at 10:58 AM
I have checked out Coopers salvage in the past, but never seen an auction
this size before!
https://www.winknews.com/2022/12/28/hundreds-of-boats-up-for-auction-at-salvage-yard-along-burnt-store-road/
Bill Coleman
Erie PA
Please show your appreciation for this list and the Photo Album site
B must think the 213 MHU is still good, as they are still making them and
charging more for them than their newer units. At least they are repairable
- I put new bearings (SS races and ceramic balls) in my old one, and it is
still working - -Knock on wood.
Bill Coleman
On Tue, Dec 20, 2022
Nice diagram,
Thank you -
Bill Coleman
On Tue, Dec 20, 2022 at 10:32 AM Kevin Wright via CnC-List <
cnc-list@cnc-list.com> wrote:
>
> Hi All,
>
> After some help from the list and DIY solar power forum I’ve created the
> attached diagram. Thought I’d post it in ca
are so tiny, any slightly imperfect
connection causes bad outcomes.
Bill Coleman
Entrada Erie PA
On Mon, Dec 19, 2022 at 6:44 PM Martin DeYoung via CnC-List <
cnc-list@cnc-list.com> wrote:
> Charlie,
>
>
>
> I have a similar issue with Calypso’s B wind instruments. I have bee
Oh!
Never mind!!
Bill Coleman
On Mon, Dec 5, 2022 at 9:23 AM Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
> Usually at least 2500-3000 PSI.
>
>
>
> Joe
>
>
>
>
>
>
>
> *From:* Bill Coleman via CnC-List
> *Sent:* Monday, December
how much pressure do you need? I've got a compressor on mine but it only
makes 100 lb. But it is 12 volts.
Bill Coleman
Entrada, Erie PA
On Sun, Dec 4, 2022, 22:16 David NCW via CnC-List
wrote:
> Thx i need to run a dive compressor
>
> On Sun, Dec 4, 2022, 6:05 PM Joe Della Barba via
Or just go the Asymmetric route. I went from two sheets and two guys, to
one neutral with Twingers, to Asymmetric. Too many strings confuse me.
Bill Coleman
On Thu, Dec 1, 2022 at 5:22 PM cenelson--- via CnC-List <
cnc-list@cnc-list.com> wrote:
> Great info and from someone who knows
I used a trucker called Middle River Marine, I was happy with him.
I think he is based in the Annapolis area. You will do best with
flexibility, as in allowing a back haul.
Bill Coleman
Entrada, Erie PA
On Thu, Dec 1, 2022 at 2:15 PM david coleman via CnC-List <
cnc-list@cnc-list.com>
IIRC, wasn't someone just looking for a marina in this area? And also, was
this the marina that everybody was saying was really bad?
Bill Coleman
Entrada, ERI PA
On Mon, Nov 28, 2022, 12:12 David Knecht via CnC-List
wrote:
> I can’t say I am terribly saddened. Seaport Marina is the wo
think, as I have no experience with those.
There, that comment was worth about what you paid for it.
Bill Coleman
Snowy Erie PA
On Fri, Nov 18, 2022 at 10:39 AM pete.shelquist--- via CnC-List <
cnc-list@cnc-list.com> wrote:
> I am looking to update my shore power charger and considering
1 - 100 of 1300 matches
Mail list logo
