Hi
Has anybody replaced their cutlass bearing on a C 35mk3?
I, tried to remove it with the shaft in place, but the tool I borrowed
did not work.
Any info would be greatly appreciated.
Thanks
Gerry Fennessey
Fianna C 35 MK3
Gerald Fennessey
gfennes...@verizon.net
Scepter Military Fuel 20l plastic, two on ebay for sale now $100.00.
I have been using them for 10 years, never leak and no-spill if you use their
fill spout.
Very pricey but the last can you will have to buy.
-Original Message-
From: David Knecht via CnC-List
To: CnC CnC
Hi David,
I Have been using
I have been using Bristol Amber Urethane Finish with good
results. The finish on my cabin sole looks like what you see on super yachts.
Gerry FennesseyFianna1985 35 MK lll
-Original Message-
From: David via CnC-List
To: CNC CNC
Cc: David
Sent: Wed,
Looking to replace the cutlass bearing
on my 1985 35 mk3.
Any info would be helpful.
Does the rudder have to be removed or will the shaft slide by it?
Is there a special tool for removing it without removing the shaft?
Thanks
Gerry Fennessey
Fianna
gfennes...@verizon.net
that presses the
cutlass bearing out with shaft in place. I got me one. I’ve read they’re
finicky. As in, they work great on brand new cutlass bearings. Never used it
because we changed the CB when new shaft installed.
J
Sent from my iPhone
On Sep 24, 2018, at 4:08 PM, Gerald Fennessey via CnC
icker the cutless bearing (NOT cutlass), the better they work.
Joe
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Gerald
Fennessey via CnC-List
Sent: Monday, September 24, 2018 4:44 PM
To: cnc-list@cnc-list.com
Cc: Gerald Fennessey
Subject: [EXTERNAL] Re: Stus-List Cu
Thanks. Would you happen to remember the inside and out side diameter of the
bearing?
Gerald Fennessey
gfennes...@verizon.net
-Original Message-
From: Howard and Skippy via CnC-List
To: cnc-list
Cc: Howard and Skippy
Sent: Tue, Sep 25, 2018 10:14 am
Subject: Stus-List Cutlass
Try these guys
Maritime T-Shirt Company (maritimet...@gmail.com)
-Original Message-
From: Chris Graham via CnC-List
To: cnc-list
Cc: Chris Graham
Sent: Fri, Dec 7, 2018 10:04 am
Subject: Stus-List Logo mugs
Hi listers!
Quick question for anyone out there who might know if there
Hi, I have a 1985 C 35 MK3 looking to replace the Bowmar hatch nylon hinge
pins.
Anybody have any ideas?
ThanksGerryFianna35 MK3___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you
:1.0in 1.0in
1.0in 1.0in;} #yiv0796819753 div.yiv0796819753WordSection1 {} #yiv0796819753 Hi
Gerry Is it possible to straighten the strut? From: CnC-List
[mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Gerald Fennessey via CnC-List
Sent: Tuesday, May 28, 2019 10:27 AM
To: cnc-list@cnc
Hi
I have a 1985 C 35 MK 3 with a very bent prop strut.Talked to Accutech this
am, the company that made the strutis out of business and it could take as long
as ten weeks to get anew one cast.If anyone out there knows of a new or used
strut for this boatplease let me know.Sailing on the hard
Power wash then wet sand with 3M red pads, then a very light sand in the spring
and paint.Using Vivid white on keel and rudder, blue on hull.
Gerry 35 MK3Fianna
-Original Message-
From: Randy Stafford via CnC-List
To: cnc-list
Cc: Randy Stafford
Sent: Thu, Oct 24, 2019 4:28 pm
Neil,
I had a Tacktick system on my Morgan 30/2 and now on my C 35 mk3 no issues
what so ever.
Gerry FennesseyFianna 33
I had one om my 35/3 without issue.
-Original Message-
From: Joel Aronson via CnC-List
To: cnc-list
Cc: Joel Aronson
Sent: Thu, Dec 19, 2019 2:23 pm
I have a 1985 C 35 mk3 does anyone know what color the deck gelcoat is? Its
off white but having hard time matching.Any help would be appreciated.
ThanksGerry FennesseyFianna ___
Thanks everyone for supporting this list with your contributions. Each
on recording a small section forward. I Plan on using Quantum 99
topcoat. I ordered the swatch sheet. No two of us could nail it down but #1022
insignia white is what we’re going with.JonHideaway 35-3
Sent from my iPhone
On May 18, 2020, at 2:42 PM, Gerald Fennessey via CnC-List
wrote:
I have a 1985
on the boat during
different light conditions. Order the best match.
Dennis C.Touche' 35-1 #83Mandeville, LA
On Mon, May 18, 2020 at 1:42 PM Gerald Fennessey via CnC-List
wrote:
I have a 1985 C 35 mk3 does anyone know what color the deck gelcoat is? Its
off white but having hard time
Any one have experience pressing in a new seal in the 3gm raw water pump.
Thanks
Gerry Fianna 1985 35 MK3 ___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list
I just got them from hatchmasters $607.00 for port and starboardgreat people to
do business with.They also redid my hatches last year.
Used silka 295 uv to install.
-Original Message-
From: Larry via CnC-List
To: cnc-list@cnc-list.com
Cc: Larry
Sent: Tue, Jun 2, 2020 11:28 am
Subject:
Go to MiniCraft.com they have the correct gel coat match.
Believe me I spent a lot of money before I found these guys.Its not cheap but
it will match.
-Original Message-
From: Stephen Thorne
To: Stus-List
Sent: Sat, Dec 5, 2020 11:32 am
Subject: Stus-List Re: 1990 C 34+ gel coat
This is the best cup racing ever, 1987 take back the cup!!
The new boats are great hitech, but its not sailing I can get very excited
about.
https://www.youtube.com/watch?v=pfzSbsXmlJs
Gerry FennesseyC 35 MK3
-Original Message-
From: Andrew Burton via CnC-List
To: Stus-List
Cc:
I have 85 MK3 used these people for gelcoatthey know all C colors, my deck
was smoke gray was not cheap but perfect match.
MINI-CRAFT OF FL INC.900 INDUSTRIAL DRWILDWOOD FL 34785
352/748-5200352/748-5338 FAX
-Original Message-
From: Doug Mountjoy via CnC-List
To: Stus-List
Cc: Doug
21 matches
Mail list logo
