Chris
I can't duplicate this so called bug.
Just did update on 3 different computers with all a different OS
All went true the normal process and restarted with the previous log
Auto connected to cluster also
Guy ON4AOI
-Original Message-
From: dx4win-boun...@mailman.qth.net
and one for the
end time (:
Guy ON4AOI
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of WA7AA
Sent: Monday, November 20, 2017 10:16 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Dx4win] Update DX4Win from LOTW
On 20-Nov
Did you install the lptdriver ?
This works in all versions with all winkey related hardware
Guy
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of w...@att.net
Sent: Friday, November 17, 2017 6:43 PM
To: dx4win@mailman.qth.net
Update went perfect like expected
DX4W903.exe downloadable also via my homepage
Guy
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Paul van der Eijk
Sent: Wednesday, November 15, 2017 4:03 PM
To: DX4WIN Reflector
Subject:
9.01
==
The improvements in this release would not have been possible without the
suggestions and bug reports from the beta testers:
Jim, AD1C
Paul, F6EXV
David, K2DBK
Bud, N7CW
Lee, N7NU
Guy, ON4AOI
Kostas, SV1DPI
Mike, W0VTT
With a very special thank you to Jim for his
Mark,
You don't do anything wrong
The editors are disabled for the moment
Guy ON4AOI
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mark
Sent: Saturday, November 4, 2017 9:23 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win
No need to that
Check About under Help tab
There you should see Version 9.0.2.1134
Guy ON4AOI
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of Akira Iizuka
Sent: Saturday, November 4, 2017 10:45 AM
To: dx4win@mailman.qth.net
Vic
For the moment all editors are disabled
This will be enabled in the feature
You can always send your managerlist to Jim AD1C
This will be merged and all of us can update
Guy
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf
DX4WIN always restart after updates,
Nothing to worry about.
Guy
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of Mark Endorf
Sent: Tuesday, October 24, 2017 3:36 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] MSTCALS.DAT
dio is
ON.
So the reason is very simple if your Radio was "NOT ON" in dx4win you will
get time out etc
Not a crash but before F9 you have the option to start with or without
Radio.
Guy ON4AOI
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.q
Something must have gone wrong with the process
Paul will answer soon now
Guy ON4AOI
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On
Behalf Of Donald Leddin via DX4WIN
Sent: Tuesday, October 24, 2017 2:15 PM
To: dx4win@mailman.qth.net
rectory,
Even better is to rename it first to (rig)v8.rig and then copy it to V9
Makes it easier to compare and select the good one
Guy ON4AOI
-Original Message-
From: Max Mucci, N5NHJ (I8NHJ) [mailto:n5...@yahoo.com]
Sent: Saturday, October 21, 2017 11:24 PM
To: Paul van der Eij
fresh since dx4win.ini changed also format with
lot of new items in it
So merging is probably not so recommended if you are not sure if all is/was
correct
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens n
Luis
Like with previous mayor updates
You need to pay a fee depending on your previous version
See on both download pages for the order form
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Luis Teixeira
Verzonden
Also downloadable from my webpage
www.on4aoi.be
Enjoy ..
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Paul van der Eijk
Verzonden: donderdag 19 oktober 2017 20:30
Aan: DX4WIN Reflector
Onderwerp: [Dx4win
All new modes will be included for sure
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Doug Joyce
Verzonden: vrijdag 25 augustus 2017 14:42
Aan: Ken Chandler
CC: dx4win@mailman.qth.net
Onderwerp: Re: [Dx4win] FT8
I
Hi Bill,
-You can set Max tries to 1 and Poll rate to 500mS (better 1000mS)
or
-You can start DX4WIN and b4 push F9 go into the Radio tab and stop the
Radio
Delphi (the programming software) sets RS232 communications on top of the
priority list so
It can only time out
Guy ON4AOI - OT7K
Probably you downloaded that file from Jim AD1C his webpage
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Luis Teixeira
Verzonden: zondag 2 juli 2017 17:51
Aan: DX4WIN Reflector
Onderwerp: [Dx4win] Version 8.05 versus TS990
You might try to restore a previous restorepoint from before deleting
-Oorspronkelijk bericht-
Van: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] Namens Radivoj Kar,
F6GNZ via DX4WIN
Verzonden: vrijdag 11 maart 2016 8:53
Aan: DX4WIN Reflector
Onderwerp: [Dx4win] Bluetooth USB dongle
Hi Ernie
I think something is set wrong in AWARDS
Probably digital is not marked
Works here in all version that I can test.
Guy ON4AOI-OT7K
-Oorspronkelijk bericht-
Van: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] Namens Ernie Walls
Verzonden: woensdag 20 januari 2016 9:25
Aan
rs anymore ?
Guy ON4AOI-OT7K
-Oorspronkelijk bericht-
Van: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] Namens Lou Dietrich
Verzonden: maandag 19 oktober 2015 18:30
Aan: dx4win@mailman.qth.net
Onderwerp: Re: [Dx4win] Future of DX4WIN
Paul,
I don't think anyone expects y
working
but not ok via the USB port and I have tried many drivers for the FTDI chip.
Guy ON4AOI
-Oorspronkelijk bericht-
Van: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] Namens Jim Reisert AD1C
Verzonden: zondag 14 juni 2015 4:28
Aan: DX4WIN Reflector
Onderwerp: [Dx4win] ICOM IC
How is your rig connected to the computer ?
-Oorspronkelijk bericht-
Van: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] Namens Andreas Junge
Verzonden: zondag 7 juni 2015 23:53
Aan: Jim Reisert AD1C
CC: DX4WIN Reflector
Onderwerp: Re: [Dx4win] First Beta release for ICOM IC7100
Jim,
modified
Guy ON4AOI-OT7K
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Dave No there isn´t
Do you have any info what they changed with the CAT cmd
I can´t test IC7800 anymore, sold due lack of ICOM support
But I can have a look in the previous rigfile that I wrote for IC-7800
Guy ON4AOI-OT7K
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net
Hi Jim
I have made a rigfile for the IC-7100 a few months ago
You probably need only address change and corrected baud rate to work with
the IC-7200
You find it on AD1C downloads
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun
Hi Terry,
The only difference compared to your settings is
In my setup DTR = High
And the following doesn´t matter for the driver
Poll rate I reduced to 500 and max tries is 3
Guy ON4AOI
-Oorspronkelijk bericht-
Van: Terry Hines [mailto:trthi...@verizon.net]
Verzonden: dinsdag 28
It is in French but with screenshots
http://www.f6aoj.ao-journal.com/crbst_892.html
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens William Osborne
Verzonden: maandag 13 januari 2014 23:18
Aan: dx4win
Jeff, all replies to you are not deliverable
User unknown
Guy ON4AOI
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list
Hi Luis,
Very easy to do
F9 and then F8 and type 3B9FR into Callsign
In the list go to the qso´s b4 that date
Now in the DXCC -WAZ - etc (at the bottom) Select ¨I¨ (from invalid or
ignore) instead of -- or S (C=I would not change)
Save with F10
Do this for all qso´s and your done
Guy ON4AOI-OT7K
DXCC but is valid for WAZ
because CQ recognized them
How about that when you have set 0
Guy ON4AOI - OT7K
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Kostas SV1DPI
Verzonden: maandag 28 oktober 2013 18:15
Aan: dx4win
Marcel,
It looks that I made a mistake with the PSK mode settings
Edit the ICOM 7600_250Hz or 500Hz rigdriver
Change the following in [MODES]
PSK31=18,19;18,19;N
Into
PSK31=12,13;12,13;N
Save and exit
Restart DX4WIN with this driver
GUY ON4AOI
-Oorspronkelijk bericht-
Van: dx4win
Marcel I think you have downloaded a driver I made for the IC7600
From Jim´s webpage that normally isn´t available anymore because of this
behavior
This version was with the possibility to switch between VFO´s for readout
but doesn´t work
Like it should be
Guy ON4AOI,
Just back from NY+DC so
Kostas ,
Asked him to make a small drawing to understand it also
Have setups running like that so wan´t be to hard to find out what is wrong
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Kostas SV1DPI
Verzonden
Oms,
Better connect dx4win via serial port to ic7800
And the om2500a via the CIV connection
Guy ON4AOI
Van: py5eg [mailto:py...@iesa.com.br]
Verzonden: zaterdag 7 september 2013 14:22
Aan: Kostas SV1DPI; dx4win@mailman.qth.net
CC: on4...@skynet.be
Onderwerp: RES: [Dx4win] DX4WIN + ic
Hi Oms,
How are the CAT connection done with the OM2500A and IC7800?
I suppose via CIV Or ar they connected via MKII interface
Is the icom polling all the time or not?
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net
Put CIV Tranceive OFF for a try
-Oorspronkelijk bericht-
Van: py5eg [mailto:py...@iesa.com.br]
Verzonden: vrijdag 6 september 2013 15:35
Aan: ON4AOI
CC: DX4WIN@mailman.qth.net
Onderwerp: RES: [Dx4win] DX4WIN + ic 7800 + OM2500A
Hi Guy
Nice to hear from you
Yes the connection between
like a charm and no timeouts
GUY ON4AOI-OT7K
Send mail if you need them
will send them to Jim also for his dx4win pages
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net
Ron, what radio are you using ?
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Ron Stone
Verzonden: zaterdag 25 mei 2013 13:35
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] Reading radio frequency issue
For some
Milan
Go into preferences | radio and F1
There you see how to setup Transverter
Guy
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Milan Gütter, OK7GU
Verzonden: vrijdag 3 mei 2013 20:04
Aan: dx4win@mailman.qth.net
Onderwerp:
here to test that out before any release
Guy
-Oorspronkelijk bericht-
Van: jjreis...@gmail.com [mailto:jjreis...@gmail.com] Namens Jim Reisert
AD1C
Verzonden: maandag 8 april 2013 15:55
Aan: ON4AOI
CC: j...@w9rpm.com; DX4WIN Reflector
Onderwerp: Re: [Dx4win] support for the new
JOHN,
I WROTE IT A FEW TIMES BEFORE
There can´t be any support for the FT3000 rig file
Not from me or Paul or anyone else.
YAESU left OUT the cat commands for VFO-B and related Mode
So as long there are no commands in the ft3000 firmware
It is impossible
GUY ON4AOI
-Oorspronkelijk
John, like you know I tried a few months ago but
Its impossible to get it working perfect
Because some CAT commands are missing in the FTDX3000
If I remember correct it is a VFO-B and mode problem
They start to act like the vfo B problem with ICOM radio´s
Guy ON4AOI
-Oorspronkelijk
Jim,
This depends on the serial driver installed for this USB-RS232 adapter
If you get the brand and/or driver I could have a look
Normally FTDI drivers work on every OS and DX4WIN
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun
Can be done easy George
Make under Filter Selection a new entry
With date filter 01/01/2013 to 31/01/2013
Update save etc
When the filter is selected
Go into reports
DXCC
Listing worked
And you have it
You can print it or write to file (and clear the bands also)
Guy ON4AOI-OT7K
log again and again.
I like the way it is now and certainly when you manage more then one call
THIS IS MY OPINION
Guy ON4AOI-OT7K
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Dick Flanagan
Verzonden: maandag 7
Hugh
It only shows up when you have uploaded those files.
No trace afterwards, if b4 28/11/2012 you probably need to upload
Again due the BUG they fixed late evening on 28 November
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun
only a bad manual
If not there is bigger problem that I can´t solve if I don´t find a cmd
Lurking further in the CAT cmd
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens W9RPM
Verzonden: woensdag 5 december 2012 5:10
Bill check the cw settings in preferences
Probably cutoff is 10150
Make this lower
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens bill ny9h
Verzonden: dinsdag 4 december 2012 13:01
Aan: DX4WIN
Onderwerp: [Dx4win] band / freq
Pete you need to install the new LPTdriver
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Pete Smith N4ZR
Verzonden: zaterdag 1 december 2012 14:05
Aan: Dx4win@mailman.qth.net
Onderwerp: [Dx4win] Band Decoder Type
will be send out on this comport but that's enough
for the 2k
Make the following serial cable
Comport PC (DB9) pin 3 goes to expert-2k(DB15) pin1
Comport PC (DB9) pin 5 goes to expert-2k(DB15) pin5
Guy ON4AOI
Van: expert...@yahoogroups.com
John,
Did you install the lptdriver ?
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens john battin
Verzonden: donderdag 4 oktober 2012 0:40
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] help
I just upgraded from v
Hi Dan
What are the worked and mailed cutoff values in the preferences ?
Guy ON4AOI
Van: ON5UE [mailto:on...@skynet.be]
Verzonden: zaterdag 11 augustus 2012 10:09
Aan: supp...@dx4win.com
CC: on4...@skynet.be
Onderwerp: Bug in dxcc window filters.
Hello;
I found a bug
Gary,
Check if you still have a previous dx4win.cty or one with tilde in save
directory
Replace or rename to dx4win.cty and restart dx4win
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Garry Shapiro
Verzonden
.
After each qso I log I have the habit to use ALT-S (qso is written to disk and
also dropbox is updated)
Without delay means that you must have reliable network and if you do it from
remote location high speed internet
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun
John,
Check in reports - dxcc if 6M has been set=ON (in both award lists)
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens W5JMW
Verzonden: vrijdag 8 juni 2012 16:04
Aan: DX4WIN@mailman.qth.net
Onderwerp: [Dx4win] 6
Paul,
Change the suggestion to C:\dx4w805\drivers
Even if there is no physical LPT port you need to install the driver
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Paul Ferguson
Verzonden: vrijdag 1 juni 2012 21
Hi John,
Make sure that the link (path where MMTTY is located)
in your preferences is still correct
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens W9RPM
Verzonden: maandag 30 april 2012 6:28
Aan: DX4WIN
Onderwerp
John,
You have to download and install MMTTY yourself
It is not distributed or installed by DX4WIN
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens W9RPM
Verzonden: maandag 30 april 2012 6:28
Aan: DX4WIN
Onderwerp
Sended you my last one and yes it Works ok
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens David Gould
Verzonden: maandag 23 april 2012 14:32
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] FT5000 rigfile
Is it possible to
Alan,
This function is allready in it
After F8 (search) Call and then hitting F2 the ¨Qsl Date¨ field change to
today
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens ALAN ZACK
Verzonden: maandag 2 april 2012 23:18
Hi Steve,
This is very strange,
I have 2 setups with FTDX5000 and MKII and never had any problem
First thing to do is to make MMTTY work standalone
Then and only then proceed with DX4WIN
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun
vspmgr due to many problems with other software and windows
vista/7
Solution is the device router from microham, there serial splitter (Eltima
drivers)
never fail(ed) but thats probably not what you are looking for.
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net
Field
Country Tab|Update
File|Save changes and Exit
That's it
Guy ON4AOI
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list
Jim
The official papers were signed +/- one year ago
Guess its because NC1L is not at the office
That it isn´t done yet
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Jim Reisert AD1C
Verzonden: vrijdag 17
Hi Bob,
Where did you get the FT450b file ?
Normally there is only ft450 file in the directory
Guy
-Oorspronkelijk bericht-
Van: Bob McLeod [mailto:bob.ja...@horizon.co.fk]
Verzonden: zondag 21 augustus 2011 21:19
Aan: ON4AOI
Onderwerp: Re: [Dx4win] DX4Win v8.05
Thanks
Hi Kostas,
It is possible in dx4win,
Make a memberlist of the calls (txt-file) you need and import them with the
letter ¨I¨
just like you would do with the lotw and eqsl members, this list can be
endless
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net
What radio do you you use ?
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Ricardo Navarrete
Verzonden: dinsdag 3 mei 2011 17:08
Aan: Dx4win@mailman.qth.net
Onderwerp: [Dx4win] Problems with my MKII
Hello
.
But running MMTTY as standalone, the TX-PORT Box shows COM-TxD(FSK)
and USB
port Limited Speed.
Any idea? This issue is driving me crazy...
--
*73 de Tony*
*EA5BY
Skype: ea5by.tony
Settings should remain the same when running stand alone or via dx4win
Guy ON4AOI
Hi Dave,
Is this a PC or a Laptop?
What is your operating system ?
Is the serial connection a reel comport or USB-to-serial
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens David M. Monfried
Verzonden: woensdag
First tell us what RIGFILE you use ? probably an old one for the ft2000 or
ft9000,
In dx4w805 is a new rigdriver for the FT5000, dated 2 januari 2011 so why
stay on dx4w804 ?
Guy ON4AOI
Van: on4iq [mailto:on...@telenet.be]
Verzonden: vrijdag 1 april 2011 12:32
Aan: dx4win
Hi Wayne
Did you install the LPTdriver ?
Can be found under c:\dx4win\drivers
If not do it and normally your problem will be solved
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Wayne Splawn
Verzonden
there are possibilities
that I don´t like and I was talking to Paul to check what options
there are.
I will get back with more details and explanations
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Mel
Verzonden
the same or have
other effects.
The RS-BA1 that I own also does not do what we hoped for,
It only read onetime but when retuning the sub-vfo you have
to manually switch between Main and Sub to get it on screen.
Guy ON4AOI
__
Dx4win
Hi All,
For what it is worth the IC7800 does not have the switching problem
Even when it is controlled only by the IC7800, this is confirmed by
Larry K8UT
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens ON4AOI
TN and 9Q are 2 different DXCC
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Mark Lunday
Verzonden: zaterdag 12 februari 2011 8:29
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] Late night question
My
Ed
Check under reports/awards what is selected for DXCC
QSL card-LoTW-eQSL
Check or uncheck what you need and then try
This has not changed in this release
+56K qso in log and no problem
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun
rigfile and if needed for split
operation you select the new rigdriver in radio 2
Same settings etc, switching goes via shift+ctrl+F12
This polling doesn´t arm your rig I tested out here 24 hours without break
and still using the rig hi.
Guy ON4AOI
PS some are testing a rigfile
What Rig are you using ?
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens LU5FF - Javier
Verzonden: woensdag 2 februari 2011 0:38
Aan: Jim Reisert AD1C
CC: dx4win@mailman.qth.net
Onderwerp: [Dx4win] DX SPOTS
Updated my webpage
Guy ON4AOI
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Dean, Open the help file
Search after Master Calls (in appendix B: Files)
And there is a step by step guide
Guide ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Dean Norris
Verzonden: zaterdag 22 januari 2011 18:16
Jim and others I use dropbox for secondary backup
And I have no delay´s nomatter if I do ALT-S every qso
Or not, guess it depends on how speedy
your internet connection is
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net
Hi Loren
Fill in the call change the prefix to vp8/o
And log the contact.
Double click on the call in the logbook so it appear agn
And do CTRL+DEL, now this contact will be deleted
Next time a spot arrives from VP8ORK it will be showing VP8/O
Guy ON4AOI
-Oorspronkelijk bericht-
Van
William
In preferences under RTTY tab - Type should be none
And last line MMTTY needs to be pointing where mmtty.exe is located
And what is your rig? I ask this because for my Icom I don´t need the extfsk
Guy ON4AOI
-Oorspronkelijk bericht-
Van: William Osborne [mailto:wosborn
Did You install the new LPT DRIVER ?
Can be found under c:\dx4w804\drivers
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens William Osborne
Verzonden: maandag 10 januari 2011 18:10
Aan: Dx4win@mailman.qth.net
changed some commands but not added something like READ VFO-B
Otherwise it would have been simple to add it.
(Switching between MAIN and SUB to get info is a possibility but the dial
change with it etc)
Keep you informed
Guy ON4AOI
-Oorspronkelijk bericht-
Van: Peter Bacon [mailto:pe
Will have a look instandly
Guy
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Peter Bacon
Verzonden: zondag 26 december 2010 13:48
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] Icom IC-7800 rig file
I see that Icom
probably can to read the split
freq
but the previous value-check for cmd 1C was never used in DX4WIN.
They were used to check if you were in RX/TX or to read the antenna tuner.
Think we have to wait after a solution from Paul
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun
give you any other information.
Another thing is that we suspect the new doc is incorrect
Command 0F (split on/off) is still working like b4 but in the doc is marked
Read Split setting
Nothing is mentioned about setting it anymore,
Confusing ..
Guy ON4AOI
-Oorspronkelijk bericht
.
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Ralph Fedor
Verzonden: dinsdag 14 december 2010 16:33
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] Unable to enter data
Something has gone astray inside
Bill,
Did you select the YAESU FT-950 rigfile in preferences
Start with the rig first and when it is working
We move to the next step for the SDA controller
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens
Tony, switching between 2 tranceivers is only possible via pin14
On the LPT port, CW keying is not a problem via serial-lpt or usb to serial
Check help file for drawing
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net
Zoran, my info is correct
Its for the fullist.xml
Not the iota´s that are in the cty file
There is a difference between those 2 files
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens WA7AA
Verzonden: dinsdag 16
For those that like to update
Close DX4WIN
Delete iota file in dx4win/save directory
Go to the website below and when the fullest.xml is loaded
Go to FILE in your browser and select save as
Select the dx4win/save directory
After restart the new fullest will be converted
Guy ON4AOI
Neil,
In preferences set the rtty window to TCPIP instead of a comport
Then in the rtty window click right and select internet connection
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Neil G0JHC
Verzonden
Below are what will be the DXCC assigned country codes for the new entities
once they are entered into the DXCC system:
517 - Curacao
518 - Sint Maarten
519 - Saba and St. Eustatius
520 - Bonaire
Guy ON4AOI
__
Dx4win mailing list
.
With those few extra clicks you pay more attention in what you are
doing.
Guy ON4AOI
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win
Found the problem Dave
There are 2 links on there webpage,
On top if you read the text it is correct
At the bottom where it shows download it is wrong file
Guy ON4AOI
-Oorspronkelijk bericht-
Van: Dave Perry N4QS [mailto:n...@comcast.net]
Verzonden: maandag 4 oktober 2010 6:28
Aan
If you follow the link on LoTW you still get version 1.11
Not the new one
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Jim Reisert AD1C
Verzonden: maandag 4 oktober 2010 1:55
Aan: DX4WIN Reflector
Onderwerp
Hi Brian
Check your preferences : F2 key
Also check reports : awards that qsl card is marked
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens n...@aol.com
Verzonden: maandag 20 september 2010 16:49
Aan: Dx4win
101 - 200 of 500 matches
Mail list logo
