Just completed building an (external) AF1 audio filter mini module (Rev A board
that required the cutting of a solder trace on the AF input and the addition of
a jumper on the AF output). Works great except, I've noticed two things I'm
curious about:
1. With stereo headphones plugged in, one
If the TS-990 was meant to be completive it really missed the mark in
performance and price. With many radios coming in ahead of it in both, only
first it has garnered was amount of knobs and buttons 8).
73,
Fred/N0AZZ
K3 Ser # 6730--KX3 # 5210--K2/100 # 6470-KAT100
P3/SVGA--KAT500--W2
Amps
My KXPA100 arrived yesterday. It's a great amp and very easy to setup and
use. I have one unexpected issue though.
Set up is PC connected via KUSB to the KXPA100, KXPA100 connected by KXPACBL
to the KX3, and latest firmware on both. When PA Mode is set to on, Amateur
Contact log cannot read or
Paul,
If you look at the schematic, you should see that the output jack is a
stereo type with both channels connected together.
That means your stereo headphones should receive the same signal in both
channels.
Try turning the phones backwards and see if the louder channel reverses
- if it
I am selling my KX3 and Down East Microwave 25 watt 2 meter transverter.
KX3 s/n 1165 with all internal options:
KXFL3 roofing filter, KXAT3 autotuner, KXPD3 paddle, KXBC3 battery charger.
Including KXSER cable, KX3PCKT cable set
Including MH3 microphone
Including 3 single band MFJ antennas
still have a digital clock I put together from a kit that I bought at Dayton
probably in the late 70s from OptoElectronics, it just keeps turning
over the digits on my desk every day. probably last longer than I will.
73 Al ve3gam
- Original Message -
From: Lynn W. Taylor, WB6UUT
On Dec 27, 2013, at 10:00 AM, elecraft-requ...@mailman.qth.net wrote:
Still no luck at all. The two jumpers are set as follows:
First, stick with it, once you get it working you will LOVE the mkII, its a
great in interface!
Joe has always given me excellent help with my issues.
I first used
Hi Jim,
We'll look into this right away.
73,
Wayne
N6KR
On Dec 28, 2013, at 3:57 AM, Jim Kutsch, KY2D jimkut...@yahoo.com wrote:
My KXPA100 arrived yesterday. It's a great amp and very easy to setup and
use. I have one unexpected issue though.
Set up is PC connected via KUSB to the
Hi,
Just about to throw the switch on a KRX3 order. Going over the manuals I see
no way to attach the IF-out of the
KXV3A to the sub-receiver. It seems natural to use the panadapter on the sub
to watch other bands while working
with the main rx. Am I missing something, or must the IF-out
Has this link been changed? When I try to use it my browser just keeps timing
out. Thanks.
Jim Robbins
N1JR
Link:http://www.mail-archive.com/elecraft@mailman.qth.net/maillist.html
__
Elecraft mailing list
Home:
Works for me
Joe
WB2SSB
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of James Robbins
Sent: Saturday, December 28, 2013 12:16 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Has this link been changed?
Has this link
This may be a neat way to increase power over time. Start with one
KPA-500 and work your way to 2 or 3. Not sure what the cost would be. I
am really enjoying my KPA-500, a KPA-500x2 or KPA-500x3 would be really
neat.
What do you think Eric/Wayne?
Rich - N5ZC
I have for sale a HAL Communications CW/RTTY Keyboard Keyer with the add/on
64/128 key extended memory option. This unit was manufactured in the early to
mid 1970's and was one of the more expensive keyboard keyers of it's day.
Factory assembled ones cost $799 without the extended memory
How do I put the K3 in AI2 or AI3 mode?
I only see NORM and 1 as choices in the config menu for AUTOINF. I am
running the latest firmware (MCU 4.67), if that matters.
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Programming-question-tp7582161.html
Sent
Dick, Wayne,
Many thanks. Thanks to Dick's explanation below, the Problem is solved.
Amateur Contact Log now reads and controls the KX3 regardless of PA Mode
on/off. The solution was to manually set the KX3 baud rate to 38.4 and set
AC log to that as well. Previously, AC Log and the KX3 were
Google Acom splitter
I do not endorse the product, nor the use of 6KW for amateur purposes, but it
may meet your use case
73, Tom W2SC
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard Thorne
Sent: Saturday,
It's in the K3 programmer's reference. From the K3 Utility, command tester,
enter AIn; where n is 0, 1, 2, or 3.
Don't enter the quotes, do enter the semicolon. AI; is a query, it should
respond with AI0; or AI1;, etc.
73 de Dick, K6KR
-Original Message-
From:
I have preamps on multiple VHF and UHF antennas on the same tower
mast. All preamps are powered off together by a master sequencer so
if I transmit on one band all others are off. The TR relays also are
switched at the same time disconnecting all preamps from their
antennas when any one band
DKB-2010 has been spoken for.
W0EB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Rig is a K3. Computer is running WIn7 Pro 64-bit, AMD 4.0 Ghz, 32gig
ram, real Serial port, not usb to serial. LP-Bridge is set to 200ms
polling rate, DXLabs Commander is set to 300ms polling rate.
Having just read K6KR's reply to Barry about the AI command (quoted
below) I wonder if this may
It seems that Tokyo High Power is (or will soon be) no longer:
http://www.hamradio.com/news.cfm
This is unfortunate news for those folks who spent anywhere from $3 to
$6K on amps that now have no warranty. This also makes me appreciate
Elecraft's support even more...
73,
Scott, N9AA
Hi, Don.
I thought to swap the headphones around to see if it might be my hearing in one
ear; the reduced output swapped to the other ear. Will check using other sound
sources to see if it might be the phones themselves.
What's confusing me a bit is the distortion that's introduced by
Good luck finding an answer - I asked and was quickly told it works for
me by someone.
It is not working here - neither on my Windows machines or Linux
machine. Used to work - until a few days ago - then nothing.
I sent an email to Elecraft - no reply.
Oh well, my K-Line is working well for
It is working on my patch of the 'net. Usually when some can get the site,
and some not, DNS servers are often the culprit - not updated yet, still
being updated, etc.
Give it a day or two and you should have it working for you as it is for me
here in Northern CA.
- 73 de Mike, K6MKF, W6NAG,
Just tested it here and the link works on my iPhone. In general if the link
fails for some the problem is not with the site. It's more likely a temporary
internet routing problem.
Note that both the mail-archive and Nabble archives are run by independent
outside parties and not by us.
73
It seems that Tokyo Hy-Power has gone bankrupt:
This information according to HRO's news release, which can be seen at:
http://www.hamradio.com/news.cfm
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Steve,
Although the KRX3 provides no external connection to the 1st IF, I
have made a modification to do so (very easily). Details are on my website at:
http://www.kl7uw.com/LINRAD.htm
This webpage deals with making an adaptive receiver using the K3 wit
KRX3. Scroll down the page to the
Hello Elecrafters,
I have been spending some quality time tuning my vertical and getting the
bands closer to resonance today. I have gone into the Config Menu and
specified Tune Power to 10 W. All bands, 80-6 obey the setting BUT 15M, no
matter what setting 10, 25, 50, 100W, or NOR, it shows
I have a nice K2/10 loaded with options For Sale.
If interested contact me direct
73! Tomy Ivan KF7GC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Bought a new rig so this must go.
KX3 serial number 4691 factory built about 6 months old. Has the following with
it.
ATU
Pass band filters
Battery charger/clock
Hand mic
Power cord
Accessory cable kit
All manualsPaperwork and factory box
Nifty KX3 stand
Nifty KX3 manual
I'll sell it for $1195
I tried it... works fine. You can buy adequate input and output combiners
from Communication Concepts.
Dr. William J. Schmidt - K9HZ / J68HZ/ 8P6HK/ ZF2HZ
Owner - Operator
Big Signal Ranch
Staunton, Illinois
email: b...@wjschmidt.com
-Original Message-
From:
Fred is working on a new book the the KPA500 and KAT500 - anyone know
when this will be coming out?
Thanks,
Bill W2BLC K-Line
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
= lots of fun
http://qrz.com/db/S79ACR
73 HNY
Gary ZL2iFB
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
__
Elecraft mailing list
Home:
Hello,
More info. I have checked the decimal point per one suggestion. I also
now noticed that running JT65 on 15M, it claims 100 watts (full power) even
if I set the power of the KPA3 to 15 watts. If I disable the KPA3 and run
the K3 at 10W is shows 10W. Looks like a PA problem of some kind.
At the end of every message we get:
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Since for many of us this time of year is when we do our major
donations, consider sending a few dollars toward the people who
support this list.
After re-loading the firmware twice and restoring my factory settings, all
is right with the K3. Still a strange thing. I guess all troubleshooting
starts with a firmware reload (or two) HI.
Thanks Rick Bates for the input.
73
/randy
On Sat, Dec 28, 2013 at 3:23 PM, Rick Bates
It looks like I spoke too soon. As soon as I got all settings redone, it
went back into full power mode no matter what setting I chose from
(13W-100) so I ran the transmitter gain Calibration at both 5W and 50W.
Sure enough, it failed on 15M with the following:
5 watt calibration succeeded
SWR
If you have, what kind of success did you have working with it at 10 watts?
What kind (if any) of audio circuit did you use to interface the audio
to/from the rig.straight cables or something with some kind of
filtering/matching?
Thanks,
Carlton
K2CMH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
No link in the message...
73 Ron AC7AC
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill W2BLC
Sent: Saturday, December 28, 2013 12:33 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Has this link been changed?
Good evening Dick,
Calibration did succeed on 17M and output is FB-no issues.
I have contacted support but thought I would continue to ask for help here.
73
K5RHD
/randy
On Sat, Dec 28, 2013 at 5:28 PM, Dick Dievendorff d...@elecraft.com wrote:
I'd contact K3 support.
There are
http://www.mail-archive.com/elecraft@mailman.qth.net/maillist.html
The link has remained unchanged for a very long time on my desktop. May
be a problem with ISP - that is the only thing that would explain why
some get it and others do not.
At this time, I get no mail-archive pages at all.
Try this link:
http://www.mail-archive.com/elecraft@mailman.qth.net/
http://www.mail-archive.com/elecraft@mailman.qth.net/
The original link works fine but the above is better formatted.
Worst case, go to http://www.mail-archive.com
http://www.mail-archive.com/elecraft@mailman.qth.net/ and
Hi Carlton,
The KX3 has been confirmed to work with the SCS Pactor modems. Contact
Farallon Electronics as I understand they are planning to offer a pre-built
cable for the the SCS modems for the KX3. This is the US distributor for
SCS modems in the US.
Cheers,
David
--
View this message
I am sure the Elecraft crew is working within the resources and limitations
that they have. We will hear more as more information becomes available.
I, too, have been waiting for the 2m module. That will make my backpacking
radio set up complete. However, I'll stay patient in waiting. Elecraft
Tx Gain Calibrations must be performed - a pass - at the 5W level before
proceeding to the 50W level. If the Tx Gain Cal failed at the 5W level on
one or more bands, odds are one of the output or the driver devices are
failing.
Re-run the 5W Tx Gain Cal, copy the results to an email and send it
Hello folks,
I sent this to Support, but they are probably resting up until Monday,
so I thought I would ask here. Has anyone had this problem with the W2
wattmeter?
I just assembled my unit. It seems to work correctly except that I can't
enable the alarm function.
1. When I turn the W2
Carlton,
I have an SCS PTC II which I have used for WinLink using another rig other than
my KX3. I run about 15 Watts when I do that. I have been quite successful
connecting to WinLink stations using both pactor I and II.
I also have a SignaLink USB. I went ahead and ordered the cable to go
Good Evening,
The weather has been pleasant this Christmas week. Not warm enough to
open the windows but the sun made things feel very nice. Normally it
is quite wet this time of year but the torrential rains have yet to
arrive. Maybe later.
Now that the days are growing longer
I just received KE7X's 2nd edition K3 book for 40% off from Lulu.com. The
coupon expires 12/31/13 http://www.coupons.com/coupon-codes/lulu/
This book lists for $44 w/shipping, but I got it for $28. I ordered it on
12/21, and received it on 12/27.
I have no affiliation with Fred or Lulu
Barry,
Thanks for the reply.How would you compare the throughput of Pactor vs
Winmor. I know on paper Pactor iii is quite a bit faster, but since you have
experience
with both of them, I was wondering what you observations in real life were in
terms of ability to work in bad
On 12/28/2013 5:16 PM, Bill W2BLC wrote:
http://www.mail-archive.com/elecraft@mailman.qth.net/maillist.html
The link has remained unchanged for a very long time on my desktop. May
be a problem with ISP - that is the only thing that would explain why
some get it and others do not.
The link on
The AI boxes in LP-Bridge have nothing to do with the AI mode of the K3.
These are used to simulate AI modes for apps connected to each virtual
port. LP-Bridge forces the K3 into AI2 mode all the time. With many apps
trying to control the rig, it would be a mess to let each one try to
change
Hello Bill and all,
Very soon, I hope. I'm still working on some details of some upcoming changes.
Thanks and please be patient. This book will have a ton of information on the
KPA500 and KAT500.
73 and happy new year.
Fred
KE7X
-Original Message-
From:
To be brief...I owned my first K3/P3 together with a KW TS-590. I preferred
the K3 for weak CW in my city QRN, but decided to leave Elecraft until their
products matured. The 590 is nice, and while it has a few warts, works ok
for me.
Four years later...I bought and tested for almost a month a
On Dec 28, 2013, at 5:42 PM, Steve KC8QVO kc8...@yahoo.com wrote:
On a side note, I looked through the FAQ page on the 2m module and see that
it looks like they have opened up the receive range to include the weather
band, at however degraded the performance becomes. If that is true - THANKS
The weekly Elecraft SSB net will meet tomorrow (12/29/13) at 1800z on 14.3035
MHz. I will be net control from western Oregon. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home:
Thanks
Tim
NZ8J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Thanks for the heads up Keith, I picked up the K3 and KX3 books for $51.44
total including shipping.
Rob
NV5E
From: kb9...@wi.rr.com
To: elecraft@mailman.qth.net
Date: Sat, 28 Dec 2013 21:28:29 -0600
Subject: [Elecraft] Fred Cady (KE7X) books 40% off til 12/31 via Lulu
I just received
Hi all,
With regard to SM5BSZ's SDR wideband-noise performance table
(http://www.sm5bsz.com/dynrange/dubus313.pdf):
The reason the K3 has excellent wideband transmit noise suppression is that it
is a down-conversion superhet with a very clean synthesizer and transmit chain.
This was
Well since I tried to cover all my bases and ask this on 3 different
reflectors, in the hopes I might get an answer I could use, I'll sum up
the results and post them now.
First, thanks to all who responded to my questions.
Second I'm not trying to bash LP-Bridge, only find a fix for my
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I got a 3D printer a month ago and am loving making stuff for all the various
ham projects. I built one for my XG50 and it turned out great. I can share
the stencil if anyone wants but its nothing special really.
CAD model: http://i.imgur.com/Trgkq0e.png
Printed:
63 matches
Mail list logo