I called Rose about a month back. Was wondering the same thing.
She was in the middle of treatment. She did tell me that she was about to send
me pictures of my K-Line covers, for my approval.
But i never got them. I'm guessing she's dealing with some serious health
issues right now.
G*d, i hope
How about these cases: http://radiodustcovers.com/Elite.html ?
Anyone ever used/seen these? Looks legit...
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On Aug 26, 2014, at 8:00 AM, Slava Baytalskiy sla...@nullserv.com wrote:
I called Rose about a month back. Was wondering the same
Count me in!
Ever since i got that REF board - i've been looking for that elusive Trimble
unit.
People had told me that eBay is full of them for like $70.
Yeah, right! Maybe 10 years ago...
Now, they're about $200-300 depending on power supply availability, and you
can't even find them...
So,
Wow!
Seriously? A glow-in-the-dark trim ring for $12? Awesome!
So it will fit the K3 knob from 73cnc folks?
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On Aug 16, 2014, at 12:10 PM, Mike Greenway k...@bellsouth.net wrote:
I have the heavy weighted CNC knobs on both my K3’s but
Nice!
I guess i did the right thing by keeping my W2 after all (was going to send it
back or sell it). And i got 2 sensors with it!
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On Aug 16, 2014, at 10:25 PM, Alan n...@sonic.net wrote:
It uses the W2 wattmeter sensors. According to
And that's why people came with Open Source concept.
Historically, proprietary platforms have been eliminated or converted to either
completely Open Source or partially, similar to what Apple did:
the platform is semi-open in the sense that nothing goes to Production without
their validation and
Using Wine is not really Linux. Wine is the Windows emulator for Linux and like
all emulators (mostly) it has issues with hardware.
Because its an abstraction layer between the OS and the target device.
Why don't you just use Linux natively?
There are programs that run on Linux, although not as
Hi Eric!
Wow, awesome! You got any pictures of the area? It must be breathtaking...
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On Aug 7, 2014, at 1:12 AM, eric norris via Elecraft elecraft@mailman.qth.net
wrote:
A couple of weeks ago I went on a kayaking trip to the northeast
I also have the K4KIO HexBeam, mounted on the roof via a Glen Martin 4.5 foot
roof tower and a 5 foot pipe.
Using it as my primary antenna for my K-Line station.
Love it.
Haven't tried it as a receive antenna on the low bands though. Interesting
idea. Will give it a shot soon.
Support from Leo
MacLoggerDX and MacLoggerDX HD (for the iPad) are the best loggers i've found
for my Macs.
Very visual and VERY easy to setup/use.
They don't do rig control besides the normal QSYs when clicking on spots. But
they do work with a bunch of rotators.
And support from the developer is awesome.
I wonder if anyone's ever used a kite in a field to keep a wire up.
I see kites a lot in the summer, along belt parkway here in Brooklyn and they
seem to stay in one place for long periods of time.
I'm sure one can use 12 or 14 AWG wire and let a kite carry it pretty high. Of
course you need
Guys, all you have to do is get Fred Kady's book:
http://www.elecraft.com/elecraft_prod_list.htm#kpa500
At the bottom of the KPA500 order page. You'll see it.
It lists every possible scenario of connecting these items together.
And a lot of other things you're gonna wanna know about integrating
Now i ask you: where else would you get an even remotely similar level of
service and commitment to customer?
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On Jun 16, 2014, at 10:27 PM, Wayne Burdick n...@elecraft.com wrote:
Hi Oliver,
The mini is used in tilted postion like the
Hey guys!
I don't know what you're talking about when you say them hats aren't free...
I got a free one at Dayton a month ago.
Then again, i did order the KAT/KPA500 and the W2 while there :-)
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On Jun 9, 2014, at 8:45 AM, Jim's Desktop
that on SSB sometimes it starts tuning for no apparent reason.
Thanks to all folks who responded!
Slava Baytalskiy
sla...@nullserv.com
W2RMS
On Jun 9, 2014, at 9:22 AM, Cady, Fred fc...@ece.montana.edu wrote:
Hi Sal,
Here is a method to train your KAT500:
Here is a procedure to set-up
I also just finished my new KPA500 build. Not 15 minutes ago.
I didn't realize that the Fuse block is empty. Good thing i decided to actually
double-check it before applying mains power.
I figured they'd put the fuses in based on the power cable i ordered (US
version, 115 V).
Also, that whole
Hello everyone!
Today i've finished my K-Line!
K3/100 with a P3/SVGA with a KAT500 with a KPA500 with a W2 (although W2 has
not yet been put in line).
I think i got everything to play together nicely (not that its difficult, the
way Elecraft makes it...)
I've put the KAT3 in bypass on all the
Hi everyone!
Finally assembled the KAT500 last night.
I never thought i would have this much difficulty with the tuner as opposed to
K3/P3.
Those SO-239 lugs are tricky! Especially the XMTR one. I actually ended up
using a black screw instead of the zinc one 'cause it just wouldn't fit.
Hoping
these things up to that?
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On Jun 6, 2014, at 7:29 AM, Slava Baytalskiy sla...@nullserv.com wrote:
Hi everyone!
Finally assembled the KAT500 last night.
I never thought i would have this much difficulty with the tuner as opposed
to K3/P3
Hi Joe!
I was under the impression that you had to switch to LineIn mic input to be
able to use the LineIn. Regardless of what is connected to it: actual mic audio
or sound card.
Am i wrong? That's how i've been using my Signalink anyway...
__
Slava (Sal) B, W2RMS
w2...@arrl.net
I'm using a WESD51 station as well and like it.
Turn the knob to change the temp is nice.
Also huge number of tips available...
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On Jun 5, 2014, at 2:07 PM, John W. Tipka w...@insight.rr.com wrote:
Bill,
Absolutely bulletproof... I have
I just looked in my K3 and this is what i have:
i'm using a Signalink USB box for DATA A mode and i set the MIC to be LineIn.
The MIC+LIN option in that case displays Not Applicable.
When i switch to USB - the Mic input is switched to whatever i had it set to
(rP.L in my case).
So it does
Interesting coincidence is that i just finished hooking up my K3 to the
Signalink USB and HRD. Like 11 minutes ago.
The cable i use has 3 plugs: line in, line out and PTT.
I didn't connect the PTT at all because i'm using that jack on the K3 for my
foot switch.
So HRD keys the radio via CAT.
Why not just use that apple laptop? I can get a good 3-4 hours out of it if i
kill everything i don't need, especially all radios.
If i didn't run Windows in it (Parallels) for HRD - i'd probably get the
advertised battery life.
Is there no way to recharge it if need be?
__
Slava
navigate to
the Electaft label and read whatever new messages had arrived. I find this
approach less distracting.
Slava Baytalskiy
sla...@nullserv.com
W2RMS
On May 30, 2014, at 10:55 AM, Don Wilhelm w3...@embarqmail.com wrote:
Paul,
Using Digest will generate just as many messages
incorporate a sending session in my daily CW routine?
Slava Baytalskiy
sla...@nullserv.com
W2RMS
On May 30, 2014, at 12:30 PM, Dick, K2ZR k...@arrl.net wrote:
Hi All,
I've taught many hams CW over the years my mantra is to first properly
learn to send each character: There is a definite
a Skype with me just so I can see/hear what you mean?
Event for a couple of minutes. If a picture is worth 1000 words - then a video
is worth a million.
Slava Baytalskiy
sla...@nullserv.com
W2RMS
On May 30, 2014, at 2:08 PM, Dick, K2ZR k...@arrl.net wrote:
-Original Message-
From: Slava
Hi all!
After seeing all the potential issues with various USB-to-SERIAL converters i
decided to go a different route:
picked up this Gearmo 4-port dongle on Amazon for $48.
It uses an FTDI chipset and a single USB port gives me 4 DB9 RS232 ports.
It also seems to keep the COM port numbering
Hey, not all skydiving requires a manual pull!
My rig always had an AAD (Automatic Activation Device) that'll deploy at around
1500 feet. Not that i'd ever let it...
But i think i took the battery out of it and used it on a Field Day or
something...
__
Slava (Sal) B, W2RMS
Hi everyone!
I've been observing an interesting trend: whenever i post on here or reply - i
get a very noticeable increase of the number of messages in my Junk folder.
Normally its 2 or 3 a day, but after posting on an e-mail list (which is a
g*d send for mail-scraping robots) - its 20 or 30 a
.
Mike va3mw
On Wed, May 21, 2014 at 8:00 AM, Kevin Stover
kevin.sto...@mediacombb.netwrote:
Nope, I get one junk mail a week. Maybe.
On 5/21/2014 6:43 AM, Slava Baytalskiy wrote:
Hi everyone!
I've been observing an interesting trend: whenever i post on here or
reply - i get
and very passionate about what he does.
Slava Baytalskiy
sla...@nullserv.com
W2RMS
On May 21, 2014, at 10:24 AM, Doug Ellmore d...@ellmore.net wrote:
I received my PAE-Kx31 heatsink from Fred VE7FMN (fsme...@telus.net)
yesterday. This morning over morning coffee, I installed the heatsink. I
Hi everyone!
Got back from Dayton today.
First time there. What an event!
I just wanted to mention the following:
no other HF radio-selling booth was as busy as the folks at Elecraft! Not by a
long shot!
Made me very proud to own one. I saw the jealous looks every time a K3/KX3 was
mentioned
Thats exactly how i did it. I'm actually using both felt washers on the VFO A
and one on VFO B.
I have the regular (all black) knob set from 73cnc.com (couldn't wait till
Dayton to get the deluxe).
But they are great.
Did you know these guys picked up the K8RA's keys business?
I just got my P4
Hi everyone!
All this talk about SPE got me looking at those amps.
How much are they? Can't seem to find any prices.
That 1K-FA looks interesting. Does it play with the K3 as well as the KPA-500?
I heard that KPA-500 has some functionality that can only be used with the K3.
I'm assuming its the
I've been using the 6.1.x for a few months now.
Seems to play with the K3 just fine.
Unlike you i mostly use it for logging/cluster/digital and not so much for rig
control...
I like the K3 knobs and my new 73cnc.com weighted VFOs.
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On May 13,
as I'm totally unfamiliar with that
area.
Thanks!
Slava Baytalskiy
sla...@nullserv.com
W2RMS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Ok. Found a room. 3 blocks from the Crowne Plaza Hotel, where I'll be attending
the Contest University thing.
Worked out ok.
Slava Baytalskiy
sla...@nullserv.com
W2RMS
On May 12, 2014, at 2:13 PM, Charlie T, K3ICH pin...@erols.com wrote:
Try any of the online hotel bookers, Expedia
wrote:
On 5/9/2014 4:40 PM, Slava Baytalskiy wrote:
By my audio stuff i mean a mic.
I'm using a Shure SM58, into a mic preamp, into a
gate/compressor/limiter/de-esser into an EQ into a mixer into the K3's
line-in.
Hi Slava,
A de-esser works in the 6-8 kHz range, and you need
I just had a thought: what about the rear mic jack (the 3.5mm) and the line out?
Can that be done?
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On May 10, 2014, at 1:29 PM, Bruce Beford bef...@myfairpoint.net wrote:
With all due respect, you already received the answer here. Yes, you
Hi Don, list!
I wanted to ask you if it would be possible to make a cable for the Signalink
USB box to connect to the K3's 8-pin front side mic connector?
I have the Signalink box that i'm using with my Yaesu 857D but i want to also
try it with the K3.
The K3's rear line-in is currently taken by
just fine. No drivers to install. And it has just enough
controls.
I really don't see why i would need a studio quality sound card for PSK31.
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On May 9, 2014, at 10:02 AM, Jim Brown j...@audiosystemsgroup.com wrote:
On 5/9/2014 5:36 AM, Slava
There are times (just about all the time, really) when i wish that this list
would join the 21 century (just like their radios) and get converted to a FORUM
(BB, phpnuke, etc..).
This is so very archaic...
No offense to anyone, the content on here is priceless, goes without saying.
But a
Hello everyone!
I'm a proud owner of a new K3/P3.
Almost there...
Can someone please explain to me the rationale behind the KPA500? Why 500W?
Is there a tremendous difference between legal limit and about half of it
(which is what i hear KPA500 can do)?
I understand the ease of use, how the amp
AM, Slava Baytalskiy wrote:
There are times (just about all the time, really) when i wish that this list
would join the 21 century (just like their radios) and get converted to a
FORUM (BB, phpnuke, etc..).
This is so very archaic...
No offense to anyone, the content on here is priceless, goes
is in the amp?
And also, is KAT500 pretty much a must?
Does anyone know if Elecraft actually has any plans to put out higher powered
amp anytime soon?
Slava Baytalskiy
sla...@nullserv.com
W2RMS
On May 7, 2014, at 11:39 AM, d...@lightstream.net d...@lightstream.net
wrote:
Increasing power from
Ok, fine. You guys convinced me.
I'm getting KPA500/KAT500 over at Dayton next week.
Elecraft guys: here i come!
__
Slava (Sal) B, W2RMS
w2...@arrl.net
On May 7, 2014, at 10:14 PM, Phil Wheeler w...@socal.rr.com wrote:
Same here re adding the KPA500/KAT500. I did have an
Hi everyone!
I just got this new Dell LCD monitor specifically for the P3/SVGA.
Its a 19.1 inch, 16:9 monitor.
However, its maximum resolution seems to be 1366x768 at 60Hz.
So the only res i can use on the P3 is 1280x1024.
Any way to include the monitor's res in the SVGA firmware, so it can
Hello everybody!
Ever since i got my new P3 - i've been looking at people's signals (naturally).
And i've noticed the following:
When using USB on 10 meters, talking locally, there are a couple of folks that
use ICOM radios and i can see these spikes on the left of the carrier.
Normally, in USB,
Hello again, everyone!
I just installed the K3EXREF board in my K3 and i also have the KTCXO3 unit in
there from before.
The idea was to use the XG3 as the external 10 MHz reference for calibration.
I wasn't thrilled with the accuracy of the zero-beat method that i was using
(or rather i wasn't
Hello everyone!
I have a K3/HRD question:
When using the DX cluster and the BandMap (the one with the vertical band
display and all the call signs on the right of it) i'm able to switch bands by
double-clicking on the spot in the cluster window. No matter what band the K3
is presently on.
But
Hi everyone!
Is there a reason why you can't save the P3 settings using the P3 Utility, like
we do in the K3 Utility?
Also, not sure if anyone saw this but would it be possible to keep the last
used label highlighted on the screen?
When you press any of the FN* buttons - to keep the label lit
Hi all!
What do you guys use for an external monitor when using P3/SVGA?
I saw a video on YouTube of a guy using a small touch screen with the
Lp-Pan/NaP3, but that can't be done with a P3, right?
Can't really use a touch screen because there's no such functionality in the P3.
So in that case
I never expected such a turnout.
And just to be clear: it wasn't a complaint! I love Elecraft!
Slava Baytalskiy
sla...@nullserv.com
W2RMS
On Apr 24, 2014, at 9:51 AM, Bill Turner dezrat1...@wildblue.net wrote:
ORIGINAL MESSAGE: (may be snipped)
On 4/23/2014 7:47 PM, Fred Jensen
Hi everyone!
Sorry if i'm venting, but how come even the tiniest packages from Elecraft take
full 7 days to arrive via UPS Ground?
1 pound package via UPS Ground, for almost $17 shouldn't take this long, should
it?
I understand this isn't Amazon Prime, but come on, 7 days?
Slava B
W2RMS
Yeah? Ok, i'll keep that in mind. Thanks!
Very useful remark...
On Apr 23, 2014, at 7:42 AM, Brian North br...@chirpytom.plus.com wrote:
If you have nothing good to say, say NOTHING!!
2E0BWQ
Sent from my iPad
__
Elecraft
choose the Cheapest option that was available?
73 Milverton.
On Wednesday, April 23, 2014 6:41 AM, Slava Baytalskiy sla...@nullserv.com
wrote:
Hi everyone!
Sorry if i'm venting, but how come even the tiniest packages from Elecraft
take full 7 days to arrive via UPS Ground?
1
Here's another one:
has anyone here ever ordered anything from Idiom Press?
I'm really at a loss here...
I ordered this RotorEZ board to give me a serial port on an older CDE HAM-IV
rotor/control box.
This was around March 31st time frame.
Their website does say that sometimes order could take up
I guess i'm just spoiled by Amazon Prime and their 2-day no matter what
delivery.
Sometimes, a lot of times, i actually get it in one day, depending on where the
item is geographically.
Oh well...
This just means i'll have one less distraction when putting up my new Hex Beam
this weekend.
Hi everyone!
Just built a new P3 couple of days ago. Been playing with it (naturally).
Have a question about screen refresh rate in SCAN:
when i set the span to something wide, like 150 or 200 and put the K3 into scan
- after one or two full screens it gets kind of choppy.
Starts to freeze up and
I see.
Well, that's what i pretty much figured: it must be the flux capacitor that is
flashing, right?
Does it need a firmware update?
Slava B
W2RMS
On Apr 18, 2014, at 8:46 AM, Charlie T, K3ICH pin...@erols.com wrote:
What are these red LEDs that are flashing inside my new P3?
It's
Thanks for everyone's input on their P3 usage patterns!
Very helpful.
Just read the manual cover to cover (again) and set my new P3 up to what seems
to be good for now.
You know what would be a good addition to the firmware? I think it would be
nice if the last used FN button would be
K2UT? Is this the same K2UT who's telnet DX cluster node i've been using?
Wow!
K2UT Bob NJ K3 8017
QRP
__
Elecraft mailing list
Home:
You know, the interesting thing about Elecraft and the K3 in particular is that
one can form an opinion of it's superiority ONLY after using it it for a little
while.
I don't think it can be done by just looking at it.
In fact, by just looking at it for a few minutes one forms the exact opposite
Hi David!
Congrats on the K3!
I'm no expert, having just built mine few weeks ago, but where did you connect
your Sub RX antenna input to? IS it connected to the RX ANT bnc or to the KAT3?
If BNC - then yes, you would need to connect the actual receive only antenna.
I connected mine to the KAT3,
Well, i guess i'm one step closer to completing my K-Line...
Just built my new P3 that i received today (SN 3157).
Very nice!
Its no LP-Pan/NaP3, i tell you that, but it doesn't require a computer, so
that's the major advantage.
I've gotten pretty used to using the NaP3 on my Mac, click/drag and
the
front panel.
Thanks in advance!
Slava B
W2RMS
On Apr 18, 2014, at 12:29 AM, Slava Baytalskiy sla...@nullserv.com wrote:
Well, i guess i'm one step closer to completing my K-Line...
Just built my new P3 that i received today (SN 3157).
Very nice!
Its no LP-Pan/NaP3, i tell you
I tried to bust through the pileup to you on 20m last night.
No such luck. Not with my SPT-500 Penetrator antenna for 10m.
Some pileup you created...
Slava B
W2RMS
On Apr 16, 2014, at 7:59 PM, Bill Breeden breede...@cableone.net wrote:
I operated as W1AW/5 from here on the Mississippi Gulf
didn't hear anyone logging in. My guess is that if you try again next
week you'll have better luck, assuming band conditions are better.
John
AC0ZG
On 4/13/2014 7:58 PM, Slava Baytalskiy wrote:
How does this net work?
I tried to get on today, at 2 PM EST (1800Z).
I heard almost nothing. Some
How does this net work?
I tried to get on today, at 2 PM EST (1800Z).
I heard almost nothing. Some random people calling CQ and what not.
No net control.
Is there a particular protocol that this net follows?
Was it even on today?
Just curious...
Slava B
W2RMS
On Apr 13, 2014, at 1:31 AM, Phil
Hi everyone!
I have a question about the ACC socket on the K3.
I saw on HamNation that Icom IC-7000 gives you this ACC pigtail cable with all
the leads marked, so that you could plug it in and easily pick out the pins you
need to use for whatever it is you're doing.
Does Elecraft have something
.
Thanks in advance!
Slava, W2RMS
On Apr 8, 2014, at 9:34 PM, Slava Baytalskiy sla...@nullserv.com wrote:
Hello everyone!
I'm not sure if this is the correct forum for this sort of a question but i
figured i'd give it a shot.
I've been going out of my mind with this strange signal pattern i've
You know what I would buy in an instant? The P3-SVGA card but without the P3
chassis. If that was available as an add-on to the K3. Bring-your-own-display
sort of an option. Have a VGA or dvi or maybe even HDMI (much smaller) in the
back of a K3.
Is that possible?
Slava Baytalskiy
sla
Hello everyone!
I'm not sure if this is the correct forum for this sort of a question but i
figured i'd give it a shot.
I've been going out of my mind with this strange signal pattern i've been
seeing on my new panadapter connected to my new K3.
I first saw it on 20 meters. It seems to be the
These are the ESD-related items that i used few weeks ago while building my new
K3:
http://www.amazon.com/gp/product/B004N96WQ0/ref=oh_details_o04_s00_i00?ie=UTF8psc=1
http://www.amazon.com/gp/product/B009ENYYGU/ref=oh_details_o04_s01_i00?ie=UTF8psc=1
Did i miss it again? Is it already over?
On Apr 6, 2014, at 12:29 AM, Phil Shepard ph...@riousa.com wrote:
The weekly Elecraft SSB net meets tomorrow (Sunday, 4/6/14) at 1800z on
14.3035 MHz. I will be NCS from western Oregon. See you there.
73,
Phil, NS7P
Yeah, this is normal behavior.
Same thing happens on my 857D and all other's radios (i hear).
You didn't do anything wrong.
Slava, W2RMS
On Apr 5, 2014, at 8:22 AM, drewko drew...@verizon.net wrote:
This is typical of HF receivers from years past-- meter indicates
increasing AGC as you reduce
Hi Dave!
A few months before i bought my K3 i bought the K3 book by KE7X.
That is probably the main reason that i subsequently bought the rig.
Slava, W2RMS
On Apr 5, 2014, at 11:58 AM, David Cole d...@nk7z.net wrote:
Hi,
Can anyone point me at some resources to better understand why I want
Sound like all you need is the W2IHY iPlus box.
It will switch between 3 radios with one mic, PTT and an amp...
I have and use it all the time.
http://www.w2ihy.com/audio-switches.html
On Apr 4, 2014, at 1:52 PM, Phil Hystad phys...@mac.com wrote:
I am thinking of setting up a configuration to
Does the PX3 attach to the KX3 in some sort of a rigid configuration?
So it becomes sort of one unit?
I imagine folks using this combo in the filed would like something like that.
Perhaps similar to this PAE-Kx31 heat sink with side handles, only extending
sideways to include the PX3?
Otherwise
I'm a new ham and an even newer K3 owner. For anyone who is function over form
any day, like me - Elecraft's learning curve is the whole point!
If i had a radio for which i didn't even need to open the manual - i'd be bored
with it in two days and probably wouldn't use it or care for it as much.
What cases and covers?
There’s a K3 cover i can get? Where?
I need that! I have 6 cats and even though they are not allowed to come into
the “radio room” - i still get a bit of hair here and there.
Can you guys and gals please point me in the direction of where i can order me
a case for ny shiny
I just did this last weekend. Put the whole K3 together, including the KRX3.
Just don’t forget to remove the chassis stiffener and all will be well.
Oh, and those little coax interconnects that are on the back side of the front
panel need to be nice and neat and out of the way.
KRX3 went in very
if that can somehow be used for the Signalink.
I also have an iPlus box (FYI).
Thanks in advance for your suggestions and ideas!
Slava Baytalskiy
sla...@nullserv.com
W2RMS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Thanks everyone!
Don, will this setup liven up the mic? Or is there a way to just switch to
front panel mic input only when using SL USB? I mean I know I can set the menu
option to fp mic. But if I didn't and SL USB keyed up the rig - my actual mic
would be live, right?
Slava Baytalskiy
sla
And one more question: what's this rj-45 type plug on the bottom of the front
panel for? Anyone using it at all?
Slava Baytalskiy
sla...@nullserv.com
W2RMS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
What exactly is the function of this device? Does it give you 8 separate serial
ports? Or is it just a hub? Is it somehow different from plugging 8
USB-to-serial cables into a computer?
Thanks!
Slava Baytalskiy
sla...@nullserv.com
W2RMS
On Mar 25, 2014, at 11:28 AM, Doug Person k0...@aol.com
it off and install the rest: KRX3 and KPA3.
Man, this is one sexy radio…
Slava (Sal), W2RMS
On Mar 21, 2014, at 11:38 PM, Slava Baytalskiy sla...@nullserv.com wrote:
Hello fellow Elecraft-ers!
Just received the shipment of my new K3/100 kit (SN8086).
Name is Slava (Sal) W2RMS
That’s it! Done!
Wow, what a job this was…
Got the K3 all built and configured. Well, the necessary post-build
configuration, that is.
What is this weird descending tone when i was configuring the 100w amp unit? Is
that normal?
Seems to be gone now…
The 5w and 50w TX Gain calibration went
Hello fellow Elecraft-ers!
Just received the shipment of my new K3/100 kit (SN8086).
Name is Slava (Sal) W2RMS.
Will be starting the assembly over the weekend.
Can’t wait to join the community.
Been reading this list (and everything else i could find on the subject of
Elecraft) for a few weeks
90 matches
Mail list logo
