I had one, which I sold and replaced with the audio filter. It was OK as
a sharp filter, but it didn't do anything to increase intelligibility of
CW signals that the regular AF didn't do. In addition, it had a noise
reduction function that worked relatively well.
73,
Victor, 4X6GP
Rehovot,
I thought those were made of unobtanium. How is it compared to the regular
audio filter?
>
> ...So I just got a KDSP2 DSP audio filter. Installed it in my K2. My
> goodness, the menus are cryptic!
>
> - Jerry KF6VB
>
...So I just got a KDSP2 DSP audio filter. Installed it in my K2. My
goodness, the menus are cryptic!
- Jerry KF6VB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Such things are probably doable, Kevin. But the
market size issue is likely a major factor
mitigating against such a development by Elecraft.
If I were to build a second K2 after all these
years, I'd sure want the KDSP2 in it; but that's
not something I'm likely to do. My (partly) 17
year
Ok thanks Don.
Mike
VE3WDM
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KDSP2-discontinued-tp7624893p7624909.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
Mike,
The DSP-X board is no longer obtainable, so the kit had to be discontinued.
73,
Don W3FPR
On 12/22/2016 6:38 PM, Mike Weir wrote:
I have built 2 Elecraft K2's and very much miss the kit building thrill. I was
considering purchasing another K2 to build and maybe sell, while I was on the
et
Subject: [Elecraft] KDSP2 discontinued??
I have built 2 Elecraft K2's and very much miss the kit building thrill. I
was considering purchasing another K2 to build and maybe sell, while I was
on the order page I noticed KDSP2 has been discontinued?? Now maybe I was
not paying close
I have built 2 Elecraft K2's and very much miss the kit building thrill. I was
considering purchasing another K2 to build and maybe sell, while I was on the
order page I noticed KDSP2 has been discontinued?? Now maybe I was not paying
close attention to the reflector but I can't remember a post
s.
73,
Mark Musick, WB9CIF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
Allen
Sent: Sunday, August 28, 2016 9:22 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KDSP2
On the Elecraft website page for the K2, it says in red letters, "N
From: Guy Olinger K2AV <k2av@gmail.com>
To: "Mark E. Musick" <markmus...@sbcglobal.net>
Cc: Jim Allen <jalleninv...@gmail.com>, Elecraft Reflector
<elecraft@mailman.qth.net>
Subject: R
SDR which I saw in Tokyo ham fair 2016.
73
Johnny VR2XMC
寄件人︰ Phil Wheeler <w...@socal.rr.com>
收件人︰ elecraft@mailman.qth.net
傳送日期︰ 2016年08月29日 (週一) 9:36 AM
主題︰ Re: [Elecraft] KDSP2
Au Contraire in my case, Johnny. I've found the
KDSP2 to be very effective and still use my
In my last job before retirement I was supervising a group of folks in a
components engineering department at Raytheon. A good number of them worked on
nothing but obsolete parts issues. When the latest and greatest parts are
obsolete in a year or so and you have missile products that require
spot
even for SSB.
73
Johnny VR2XMC
寄件人︰ Guy Olinger K2AV <k2av@gmail.com>
收件人︰ Mark E. Musick <markmus...@sbcglobal.net>
副本(CC)︰ Elecraft Reflector <elecraft@mailman.qth.net>; Jim Allen
<jalleninv...@gmail.com>
傳送日期︰ 2016年08月29日 (週一) 9:07 AM
主題︰ Re: [Ele
t;markmus...@sbcglobal.net>
副本(CC)︰ Elecraft Reflector <elecraft@mailman.qth.net>; Jim Allen
<jalleninv...@gmail.com>
傳送日期︰ 2016年08月29日 (週一) 9:07 AM
主題︰ Re: [Elecraft] KDSP2
The K2 was first prototyped in October 1997. I'll bet no one back then
would have guessed that demand for par
er available due to the lack of available parts.
>
> 73,
> Mark Musick, WB9CIF
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
> Allen
> Sent: Sunday, August 28, 2016 9:22 PM
> To: elecraft@mailman.qth.net
> Sub
Hi Jim,
The KDSP2 is no longer available due to the lack of available parts.
73,
Mark Musick, WB9CIF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
Allen
Sent: Sunday, August 28, 2016 9:22 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft
Jim,
The KDSP2 option has been discontinued.
The main DSP module is no longer available.
73,
Don W3FPR
On 8/28/2016 5:22 PM, Jim Allen wrote:
On the Elecraft website page for the K2, it says in red letters, "Now with DSP!"
Further down the page, it shows the KDSP2 under K2 and accessories.
On the Elecraft website page for the K2, it says in red letters, "Now with DSP!"
Further down the page, it shows the KDSP2 under K2 and accessories. When you
click on the KDSP2, it takes you to a page for the KDSP2 accessory.
In the order page, it shows KDSP2 as "discontinued."
Is it now
I am selling my KDSP2 currently installed in my K2/100. Now that Elecraft had
to discontinue this I'll make mine available to someone who can get better use
from it than me. It works good, and as it should, but I usually end up leaving
it in Low Pass or disabled. This is my expedition rig
Hey Mark,
Thanks for that; it was me who noticed that. Well, crap. I do have the
audio filter module, but I was hoping to get the DSP module to replace it.
So much for that idea.
Thanks again and 73
Reuben
On Mon, Jul 18, 2016 at 1:21 PM, Mark E. Musick
wrote:
> I
I sent an e-mail to sales about this after someone on the reflector pointed
out the KDSP2 was no longer on the order page.
Margaret replied that indeed it has been discontinued due to the
unavailability of parts.
She also said that she would inform the website maintenance folks to add a
note
KDSP2
The building of my K2 (# 7359 ) was concluded on December 14. 2012, after
months of sheer joy.
Once again doing something worth-while with a soldering iron in your hands.!!
The result: Amazing,… and yet I fell for the KDSP2 noise reduction on SSB
signals as demonstrated on the home
Actually Wayne (and others);
Like others - I discovered this a few years back and made a private fork on
github in October 2011.
I took some time to really dig in an concluded that I didn’t have the right
tools to do even basic experimentation.
I applaud that you’ve made it public and I’d
That was rather well hidden; it's the first I heard about it.
However I'm not surprised that there were no takers. Assembly languages
coding for DSPs is well outside the main open source community (although
there probably is a sub-community for it). Most people would be into C
for desktops
Lyle (KK7P) reminded me that we did do one experiment in community-sourced
firmware: the KDSP2 DSP option for the K2. See:
http://www.elecraft.com/KDSP2/kdsp2.htm
Quoting from the bottom of this page:
The DSP code for the KDSP2 is open source, allowing advanced users to
create their
On Tue, 19 Aug 2014, Wayne Burdick wrote:
Lyle (KK7P) reminded me that we did do one experiment in community-sourced
firmware: the KDSP2 DSP option for the K2. See:
http://www.elecraft.com/KDSP2/kdsp2.htm
Quoting from the bottom of this page:
The DSP code for the KDSP2 is open source,
Even if you find the development kit, the memory chips in the latest K2DSP
boards are not in sockets, but are soldered directly to the board. So, it would
be difficult to upgrade the firmware on the K2DSP. Also, the firmware for the
user interface is not open source, which limits the scope of
Gnuradio is a great little DSP workbench for that sort of thing.
73,
Mike ab3ap
On 08/19/2014 05:27 PM, Matt VK2RQ wrote:
[...]
These days, if you want to experiment with DSP algorithms, it is
probably more convenient to do prototyping on a general-purpose PC
with sound card.
73, Matt VK2RQ
My KDSP2 has been working fine up until today when I cracked open the lid of
the K2 to perform a VFO dial calibration. At some point during the process,
I noticed that the KDSP2's LED was staying on. I figured I must have bumped
something, so I tried cycling the K2 on and off and re-seating the
Perhaps read voltages in manual and compare to
what you measure. Note the conditions under which
those voltages were measured.
73, Phil w7ox
On 3/21/14, 12:38 PM, Brian - N5BCN wrote:
The KDSP2 manual's troubleshooting sections says to check U1 and D3 but
I'm not sure what I'm supposed to be
Brian,
Unless you unseated the DSPx module (the one on top), it is not likely
that you did anything overt to create that problem. Treat it as a new
problem that just happened to appear.
It could be a solder connection that was marginal, or it could be that
one of the pins of the KDSP2 U1
Hi Don,
I performed a voltage test on U1 with the K2 on, DSPx module removed, coin
cell batt installed.
All pins tested ok except pins 15-19 and 27 were at 5V, the spec sheet says
that they should be at 0 V. It is not obvious to me if this represents a
problem per the schematic of U1.
Also,
Brian,
U1 Pins 15-19 and 27 are not used, so whatever voltage they may be at is
not likely to be causing any problem.
Yes, the DSPx module does draw a bit of current, so it will normally
produce some heat. Just how much is difficult to say via email. While
it may be warm, it should not be
Yes, set the CW center frequencies closer to your CW IF center
frequencies. IIRC, the center frequencies are in 50 Hz steps, so you
will have to settle for 650 Hz or 700 Hz - but that will not make a lot
of difference with a filter width of 100 Hz or greater.
73,
Don W3FPR
On 9/14/2013
Put together my KDSP2 and worked first time out...still kinda missing the
KAF2 but now I have some cool SSB filtering to play with!!
Question, I've left all filters factory stock for now, on CW it notes the
center freq is 600hz, however, I set my tone to 680hz, should I go into the
KDSP2
My KDSP2 module has been sold. Tnx for interest and bandwidth. 72!
Jim Stephens, NX8Z
Sent via iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I recently constructed and installed the KDSP2 in my K2. I installed it
after I had installed and aligned the KSB2 using Spectrogram. I notice that
the KDSP2 seems to work wonderful in CW, but when I am listening to SSB
signals the audio sounds as if it is passing through a tin can.
I saw in
Fred,
I would use spectrogram to set the audio filters--it helps me to get a
visual of what the pass band will look like, and it's just easier to keep
track of what you're doing. Use the DSP menu settings for the audio filter
setup--your xfilters are already set.
Chuck
NN7U
--
View this
I just started assembling the KDSP2. However, I cannot find an image of the
top of the board. The board is well marked for the assembly, but once the
components are installed I can no longer read the text on the board. Does
anyone have an image or drawing of the the blank PC board?
Thanks,
Fred (and all),
Tom Hammond N0SS (SK) provided us with scans of the Elecraft kit
boards. His website is being continued by some members of the Jefferson
City, MO amateur radio club (thank you).
So you can go to www.n0ss.net and scroll down to SCANS of Elecraft
board images and find the
Thanks for this.
Chuck, KE9UW
Sent from my iPad
On Aug 5, 2012, at 8:07 PM, Don Wilhelm w3...@embarqmail.com wrote:
Fred (and all),
Tom Hammond N0SS (SK) provided us with scans of the Elecraft kit
boards. His website is being continued by some members of the Jefferson
City, MO
Looking for a DSP unit for my K2. Anyone have a KDSP2 either built or in kit
form that they want to off load? If so, pls contact me off-list. Tnx.
Vy 73 es Gud DX
Rich Arland, K7SZ
Cogito Ergo CQ! (I think therefore I HAM! w/apologies to Rene Descartes
1596-1650)
Columnist: The Learning Curve
I have a built KDSP2 board, or should I say, boards for sale.. I bought it
built thinking I could upgrade my K2 to dsp, but found I cannot with the
current firmware and main board..it is ready to ship. Contact off reflector at
n...@juno.com Thanks for your help
The KDSP2 has been spoken for, thank you.
Jim Douglas K2ZF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
I recently acquired a KDSP2 from a fellow list member, and would like to do
some KDSP2 development - ideas include
- implementing a continuously-variable bandwidth DSP filter (like on K3) by
interfacing to an external rotary encoder
- implementing APF
- simplifying the user interface (fewer
Andrew,
I heartily agree. Those would be very useful changes and
would add to the utility and convenience of the K2. It
would also refresh the K2 and confirm Elecraft's
commitment to the K2.
I also hope that there will be a clean interface to the
KPA-500 as well.
73
Gene K1NR
K2 6XXX
K1NR Those would be very useful changes and would add to the utility and
convenience of the K2. It would also refresh the K2
Exactly. I think there's great potential in the K2 that can be brought out,
and the KDSP2 is the key to injecting some new life into it - bringing it
closer to the
One thing that would be hard would be to change the user interface. This would
require
mods to the K2's main processor firmware. Only one person in the world can do
that, and
his initials are WB.
On 2/15/2011 6:38 AM, Andrew Moore wrote:
I recently acquired a KDSP2 from a fellow list member,
On Tue, 15 Feb 2011 10:11:50 -0800
Vic K2VCO v...@rakefet.com wrote:
One thing that would be hard would be to change the user interface.
This would require mods to the K2's main processor firmware. Only one
person in the world can do that, and his initials are WB.
Last I heard all the on
Vic/K2VCO One thing that would be hard would be to change the user
interface. This would require
mods to the K2's main processor firmware.
Yes I forgot the KDSP2 requires K2 firmware 2.01 or greater, indicating that
there's something on the K2 that communicates with the KDSP2 (this is
probably
This is somewhat related to the quoted text below. In Jan 2010 I
started writing code that presents a trapezoid on the screen. If you
drag it, you choose XFILs. Then a trapezoid nested in that represents
the DSP filter. It can be dragged to change center freq, or for SSB
edges can be
Playing with new KDSP2 here, resetting it to defaults - I've got the default
filter centers and bandwidths, low/high cuts, etc... but can't find in the
manual where the default values are listed for the denoiser Beta and decay
values.
Can I somehow set default aggressiveness of the denoiser to
Andrew,
Look at page 37 - other defaults chart.
73,
Don W3FPR
On 2/14/2011 8:14 PM, Andrew Moore wrote:
Playing with new KDSP2 here, resetting it to defaults - I've got the default
filter centers and bandwidths, low/high cuts, etc... but can't find in the
manual where the default values
Look at page 37 - other defaults chart.
Thanks Don, Brian, all... Sure enough, there they are. Apologies for not
RTFM.
--Andrew, NV1B
..
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hi all,
AWESOME!!!
This is all I can say about this kit.
Couldn't wait and assembled it the same day it arrived, Thursday.
Everything went by the book and the results are spectacular with all the city
noise I have in my QTH.
Now just have to get used with the extra menusand the artifacts it
...@att.net wrote:
From: L Kendall k5...@att.net
Subject: Re: [Elecraft] KDSP2
To: Cristian Radulescu criradul2...@yahoo.com
Date: Monday, January 17, 2011, 6:23 AM
Hello, Cristian
Glad you like your KDSP2.
I may purchase one soon, and am curious what you mean by artifacts it generates
due to digital
Ken,
Yes, the KSP2 menu entries are a litle bit clumsy, but if you follow the
directions you can get it done. I know you will hae to fumble your way
through them 3 times before it seems OK.
Specifically, to get CF1 back to the LOPASS setting, Tap DISPLAY to
bring up the KDSP2 menu - the
/11, Don Wilhelm w3...@embarqmail.com wrote:
From: Don Wilhelm w3...@embarqmail.com
Subject: Re: [Elecraft] KDSP2 - Now What Have I Done?
To: Ken Alexander k.alexan...@rogers.com
Cc: Elecraft elecraft@mailman.qth.net
Date: Tuesday, January 4, 2011, 3:32 AM
Ken,
Yes, the KSP2 menu entries
Fat, clumsy fingers; that's what I've got!
I decided to start on one of my Christmas holiday projects tonight: learning
how to find my way around the KDSP2 in my K2. All I have ever done was accept
the default settings since I got it, but have always had the feeling that the
denoiser was
Can someone please tell me the latest revsion of the KDSP-2
DSP unit for the K2 ?
Thanks es 73
K1NR
-
Web mail provided by NuNet, Inc. The Premier National provider.
http://www.nni.com/
I would like to sell my KDSP2 option w/manual for $150 or trade for a KAF2
plus $100. This can be a cheap way to get DSP in that K2 wonderbox. Please
email direct.
--
View this message in context:
http://n2.nabble.com/KDSP2-F-S-or-trade-tp4876835p4876835.html
Sent from the Elecraft mailing
Elecraft KDSP2 Internal DSP Filter and Real-Time Clock for sale. Built by
K8MBY and works as it should; I have gone back to the KAF2 Audio Filter
which is sufficient for my needs. $175.00 shipped CONUS.
Tnx,
Lou, KD2MU
__
Elecraft
On Jul 28, 2009, at 9:09 PM, richard gilley wrote:
I recently completed my K2. And was thinking of adding DSP.
As a CW op only, would the KDSP2 be a good addition?
For CW-only, perhaps not so much. I owned a KAF2 originally, and
swapped out to the KDSP2.
I never used the filtering
Your opinion is valued.
I recently completed my K2. And was thinking of adding DSP.
As a CW op only, would the KDSP2 be a good addition?
Best regards
Dick AD1G
Dick,
I own both, the analog filter and the DSP filter.In my opineon the analog
filter sounds much better than the DSP Filter on
Dick - I agree with Chris, for CW-only operation the KAF2 filter would
be a better option than the KDSP2.
73
David G4DMP
In a recent message, OE5CSP-Chris hans-christ...@gmx.at writes
Dick said...
Your opinion is valued.
I recently completed my K2. And was thinking of adding DSP.
As a CW op
Hi Ed,
The manual indicates that the LED will come on if an unrecognized
command is issued by the controler chip.
Did the modification change anything on the connector J3?
In off-chance, disconnect the two PCBs, clean the connectors and
re-assemble?
Just some off-the cuff thoughts.
Duane
N1BBR
status of
Split/RIT/XIT and PTT and they function beautifully.
Ed
AD7GR - NE Oregon
Novice WDØDRL -CO-1977- Extra since 1984
- Original Message
From: dw bw...@fastmail.fm
To: Elecraft_List elecraft@mailman.qth.net
Sent: Tuesday, July 28, 2009 9:41:06 AM
Subject: Re: [Elecraft] KDSP2
...@yahoo.com
Sent: Tuesday, July 28, 2009 12:04:27 PM
Subject: RE: [Elecraft] KDSP2 LED Stays On and No Audio
Hello Ed
You mention a mod from LA3ZA in your post.
Seems I am too blind for finding it either on the Elecraft HP or on LA3ZA
mod list.
Would you be so kind please and provide me a link
...@fastmail.fm
To: Ed K ad...@yahoo.com
Sent: Tuesday, July 28, 2009 11:17:09 AM
Subject: Re: [Elecraft] KDSP2 LED Stays On and No Audio
I figured you probably checked already.
And the battery?
I think you said you disconnected it and reconnected it?
I'm guessing that would reset the controler micro
Ed,
Check the soldering for the headers that connect the DSP module to the
board. If there was a marginal solder connection, removing and
re-inserting the module may have made it non-functional.
Did you use good anti-static measures when the DSP module was removed,
stored while it was out of
Your opinion is valued.
I recently completed my K2. And was thinking of adding DSP.
As a CW op only, would the KDSP2 be a good addition?
Best regards
Dick AD1G
__
Elecraft mailing list
Home:
I suspect there are different opinions, but mine is that it
definitely improves performance. I was amazed at the effectiveness
of the noise reduction, for example.
Bob, N7XY
On Jul 28, 2009, at 6:09 PM, richard gilley wrote:
Your opinion is valued.
I recently completed my K2. And was
My KDSP2 has operated very well over the past 2 years and four months since I
built
it... until last Saturday. I had removed it to work on the front
panel, installing indicator LEDs in the key caps as per the LA3ZA mod which
went very well. When I reassembled
the rig to test out the mods
Is it possible to have the KDSP2 filters, by example for CW mode, to have the
center frequency increment by 25 Hz or less instead of 50 Hz. I see possible
optimization on my spectrum analyzer if I could have at least 25 Hz
increment. OK it would be around 1 dBV or less, but a lower increment
That feature alone is worth the upgrade as I regularly use, esp. on SSB.
72,
Bill
K9YEQ
K2 #35, K2 # 5279, KX1 #35, Mini Modules, etc.
-Original Message-
3.1 added a command feature supported by MCU rev 2.04 to allow toggling
NR and autonotch from the front panel without having
That feature alone is worth the upgrade as I regularly use, esp. on SSB.
:-)
I've been pretty deep into the KDSP3. That's how I view the K3: a
platform for the DSP ...
Enjoy!
73,
Lyle KK7P
___
Elecraft mailing list
Post to:
What is the difference between version 3.0 and version 3.1? Is it worth
the $29 + shipping to upgrade from 3.0 to 3.1 other than the reason of
saying I have the latest firmware? Is 3.0 buggy or not a full-featured
at 3.1?
Just wondering if someone can shed some light on this subject. I was
I have a KDSP2 kit that I've decided not to use. If
interested, please contact me off-list.
73,
Dave
N8AG
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
I just bought the KSDP2 kit but have decided to not
build and install it. Please contact me off list if
you're interested in it.
73,
Dave
N8AG
Be a better friend, newshound, and
know-it-all with Yahoo!
I would like to sell my KDSP2 DSP Filter for $175 including shipping in the
CONUS. The reason for selling is to get some additional money for goodies
for my K3 when it finally arrives. For the work that I do my KAF2 will
handle it.
Please respond to [EMAIL PROTECTED]
Thanks and 73
Patrick
I am considering purchasing the KDSP2 and was wondering if someone who
has this option installed could post some recordings made while using
it. I've listened to the two recordings on the KDSP2 page and would
like to hear a few more, with different settings, etc ... I am
particularly
Hi everyone. Is there a quick means of resetting the KDSP2 back to its factory
default settings?
I've been playing and have created something akin to a Gordian knot and wish to
go back and start again. If the answer is in the manual, I'll be darned if I
can see it.
Thanks in advance and 73
David,
If there is a way to reset the KDSP2 to default, I do not know about
it. The manual does contain a chart of the default settings, so you can
walk through the menu restoring the defaults as you go.
73,
Don W3FPR
David Lankshear wrote:
Hi everyone. Is there a quick means of
Hi everyone. Is there a quick means of resetting the KDSP2 back to its factory
default settings?
No, you must re-enter the settings. There are tables of the settings in
the manual.
73,
Lyle KK7P
___
Elecraft mailing list
Post to:
The KDSP2 has been sold. The KPA100 is still available; $300 Shipped.
73,
John, KD8K
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Elecrafters,
I have a very-well built KDSP2 for sale. It is a spare, and has been
checked out by Lyle KK7P as I thought it wasn't working. I later found out
the problem was elsewhere in the K2. I also have the K2 firmware 2.04P that
is necessary to operate this accessory. The original manual
I have for sale a KDSP2 for $175.00 and a KPA100 for $300.00. Both are in
good working condition and include original boxes and manual's.
If interested please respond off list to [EMAIL PROTECTED]
73 to all !
John KD8K
___
Elecraft mailing list
Hi gang,
I must have overlooked something in the KDSP2 manual. When I set the KDSP2 in
my K2 to bypass, the next time I turn on the rig the KDSP2 is back on; it is no
longer in bypass mode. How do I make the KDSP2 stay turned off through
power-down and power-up?
Thanks 73,
Jeff
NE2J
I must have overlooked something in the KDSP2 manual. When I set the KDSP2 in
my K2 to bypass, the next time I turn on the rig the KDSP2 is back on; it is no
longer in bypass mode. How do I make the KDSP2 stay turned off through
power-down and power-up?
On power-up, the KDSP2 is always on.
Installed the KDSP2 module in my K2 this morning. During initial checkout,
the LED light does not come on upon power up, or at any other time. The
other steps on the initial checkout (p.18) seem to be working as specified.
What does it mean when the LED does not come on? Is there any
Mike,
If the KDSP2 seems to be working properly, I must ask about the
possibility of the LED being reversed.
Shine a light on the top of the KDSP2 and look carefully at the LED -
near the base you will find some reflective metal through the colored
lens - there is a narrow wedge in that
@mailman.qth.net
Sent: Saturday, April 21, 2007 8:17 AM
Subject: Re: [Elecraft] KDSP2 problem
Mike,
If the KDSP2 seems to be working properly, I must ask about the
possibility of the LED being reversed.
Shine a light on the top of the KDSP2 and look carefully at the LED - near
the base you
Sirs, I hope one of you can help. I have assembled the KDSP2 and
have been using it for 2 mos. Occasionally I'd have to restart my
K2 when it couldn't find the DSP (lost synchronization) to re-
establish proper function. I now can no longer get the K2 to syn
with the KDSP2. I have
John Moore wrote:
Sirs, I hope one of you can help. I have assembled the KDSP2 and have
been using it for 2 mos. Occasionally I'd have to restart my K2 when
it couldn't find the DSP (lost synchronization) to re-establish proper
function...
What is the serial number of your K2?
73,
Lyle
John,
I really don't know why that 'notify us ...' statement is still in the
KDSP2 manual I believe it should have been removed after a short time of
experience with the KDSP2. Perhaps Lyle Johnson can shed some light on it
An intermittent of any nature is usually caused by a bad solder
John Moore wrote:
Lyle, #02260, it has the newest firmware,
It may be an issue with the auxbus loading. A KAT100 can also affect
things since it loads the auxbus, too.
In any event, at s/n 3000 the following components were changed on the
auxbus:
Control board
R6 was 470 ohms now 100
Hello, all...
I've just built K2 #5957 and installed the DSP unit. Radio and DSP are both
impressive as is. It seem intuitive to me that the DSP filter's center
frequencies should agree with the CW sidetone. That is, if I use a 440cps
side tone, then all the DSP center frequencies - on CW -
I've just built K2 #5957 and installed the DSP unit. Radio and DSP are
both impressive as is. It seem intuitive to me that the DSP filter's
center frequencies should agree with the CW sidetone. That is, if I use
a 440cps side tone, then all the DSP center frequencies - on CW - should
be
Along these lines, is there a way to set the DSP back to factory
defaults? Pull the battery? I seem to remember reading in the manual
there was, but now that I want that info, I can't find it :|
Jeff
On 3/6/07, Lyle Johnson [EMAIL PROTECTED] wrote:
I've just built K2 #5957 and installed the
Along these lines, is there a way to set the DSP back to factory
defaults? Pull the battery? I seem to remember reading in the manual
there was, but now that I want that info, I can't find it :|
You have to enter them. There is a chart in the manual with the default
settings listed.
73,
1 - 100 of 190 matches
Mail list logo