[Elecraft] Sub Receiver for K3S

Is the sub receiver for the K3S still available? I cannot find it on the Elecraft website. Does anyone have one they would be willing to part with? 72/73, EM73vx Robin G-QRP #12386 SKCC #7294 W4IEN w4...@comcast.net __ Elecraft

[Elecraft] sub receiver not receiving

Make sure that the SUB ANT is switched to your active antenna. John KK9A Madison Jones w5mikejuliet at gmail.com [This happened once before and I forgot what the easy fix is.] K3 Sub receiver doesn't receive. What have I forgotten to check? Madison W5MJ

Re: [Elecraft] sub receiver not receiving

...@mailman.qth.net] on behalf of John_N1JM [johnn...@gmail.com] Sent: Wednesday, July 04, 2018 11:40 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] sub receiver not receiving Is it turned on in the config menu? 73, John N1JM Madison Jones-2 wrote > [This happened once before an

Re: [Elecraft] sub receiver not receiving

Is it turned on in the config menu? 73, John N1JM Madison Jones-2 wrote > [This happened once before and I forgot what the easy fix is.] K3 Sub > receiver doesn't receive. What have I forgotten to check? > > Madison > W5MJ > __ >

[Elecraft] sub receiver not receiving

[This happened once before and I forgot what the easy fix is.] K3 Sub receiver doesn't receive. What have I forgotten to check? Madison W5MJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] Sub Receiver quits working in Diversity mode

When I put my K3 #3300 FW5.57 into Diversity mode. The sub receiver stops receiving after a few minutes. If I use the sub receiver as a second receiver (no diversity) the sub RX never stops receiving. Any Ideas? Rich K3RWN __

[Elecraft] Sub Receiver Antenna Switch

The sub receiver connects to the AUX BNC or the ATU but not both. To correct this I added a toggle switch and mounted it to the ANT3 position. For my application, I needed a way to switch between both inputs. At least for now, I don't need the 2 meter module. Fortunately, I had spare TMP

Re: [Elecraft] Sub Receiver & KBPF3

Ian has a lot of good advice below. I have big hands -- I always look for the XL gloves -- and I have removed the sub receiver in my K3 several times. In fairness, I also knit socks using small needles, so I get practice with small tools. The only problems I had were getting the TMP

Re: [Elecraft] Sub Receiver & KBPF3

There are two 'secrets' for working on the subrx: 1. Take off the left side panel, even though you don't need to. Makes reinsertion much easier. 2. When plugging in the TMP cables, get the center conductor in before pushing hard on the outer part. If it is placed properly, it should go in with

Re: [Elecraft] Sub Receiver & KBPF3

>> Messing with the sub-receiver is such a PITA that I will procrastinate >> putting a new filter in for weeks before I gather the courage to pull it >> apart. > >I can't see spending the money for shipping and insurance, not to mention >factory charges for relatively simple work, over fear of the

Re: [Elecraft] Sub Receiver & KBPF3

I get the "big hands in small spaces" complaint. I have very small hands and can do some stuff that some of my friends just simply cannot do. On the other hand there is no way I can swing a sledge hammer on a ground rod like they can. Ham friends that you can bribe with 807's and a backyard grill

Re: [Elecraft] Sub Receiver & KBPF3

I don't see what all the consternation is about either. Its not that big of a deal and I have the K3XREF (a little less room) in a K3s and a K3 and both radios have the sub receiver. Fiddly??? really? I don't think so.

Re: [Elecraft] Sub Receiver & KBPF3

- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Grant Youngman Sent: Wednesday, April 19, 2017 4:17 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Sub Receiver & KBPF3 > Messing with the sub-receiver is such a PITA that I will procrastinate >

Re: [Elecraft] Sub Receiver & KBPF3

> Messing with the sub-receiver is such a PITA that I will procrastinate > putting a new filter in for weeks before I gather the courage to pull it > apart. I can't see spending the money for shipping and insurance, not to mention factory charges for relatively simple work, over fear of the

Re: [Elecraft] Sub Receiver & KBPF3

, April 19, 2017 3:21 PM To: Clay Autery; elecraft@mailman.qth.net Subject: Re: [Elecraft] Sub Receiver & KBPF3 I have built several kits of all kinds going back to Heathkit days and I built my own K2. I had a lot of problems with the sub-Rx installation. I have big hands and could not seem to be

Re: [Elecraft] Sub Receiver & KBPF3

with this where I will no longer attempt any mod that requires removal of the Sub-Rx. Everything goes back to the factory. From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Clay Autery Sent: Wednesday, April 19, 2017 12:08 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Sub

Re: [Elecraft] Sub Receiver & KBPF3

Funny IMO, some of the best design work I've ever seen especially considering the package volume vs. modularity and capability. However, I WILL confess I now own my own TMP tool, TMP connectors, coax stock, and assorted second end connectors in case I need/want to make one of those

Re: [Elecraft] Sub Receiver & KBPF3

I have a medical background, this was my first kit of any kind to do with electronics. While I did not find it easy, I had no problems putting it together. However it was not intuitive for me and had to study (not just read) the instructions very carefully, and usually more than once or twice.

Re: [Elecraft] Sub Receiver & KBPF3

Really? I have been quite please at the mechanical design of my Elecraft gear. Yes, the sub-Rec is a bit tricky to align but with a bit of care and I remove the side panel (with handle) for better view. Sent from my iPhone ...nr4c. bill On Apr 18, 2017, at 11:58 PM, Christopher Hoover

Re: [Elecraft] Sub Receiver & KBPF3

> > The TMP cables were in the way and sub-receiver box was a bit difficult > getting the SUBIN and SUBOUT boards to align and mate properly. I installed mine myself too.(And I just r/r recently with the addition of the gen coverage bp filters on the main board.) It is certainly fiddly.

Re: [Elecraft] Sub Receiver I.F. Tap

gt; To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Sub Receiver I.F. Tap Message-ID: <1492360444817-7629368.p...@n2.nabble.com> Content-Type: text/plain; charset=us-ascii Edward R Cole wrote ; I brought out the 1st IF of the sub receiver from that point using 0.001 uF disc ceramic coupl

Re: [Elecraft] Sub Receiver I.F. Tap

Edward R Cole wrote ; I brought out the 1st IF of the sub receiver from that point using 0.001 uF disc ceramic coupling cap to RG-174 coax snaked out thru a hole in the sub-Rx shield to a BNC on back panel of the K3. - I think that connecting the coax via a capacitor would

Re: [Elecraft] Sub Receiver I.F. Tap

-Pan Date: Sat, 15 Apr 2017 20:52:46 -0700 (MST) From: wa9fvp <rep...@willcoele.com> To: elecraft@mailman.qth.net Subject: [Elecraft] Sub Receiver I.F. Tap Message-ID: <1492314766397-7629352.p...@n2.nabble.com> Content-Type: text/plain; charset=UTF-8 I notice on the sub-receiver schemati

Re: [Elecraft] Sub Receiver I.F. Tap

Yes it is possible  I was going to replacate the buffer amp as it was on the main receiver for my sub receiver  Original message From: wa9fvp <rep...@willcoele.com> Date: 2017-04-15 11:52 PM (GMT-05:00) To: elecraft@mailman.qth.net Subject: [Elecraft] Sub Receiv

[Elecraft] Sub Receiver I.F. Tap

I notice on the sub-receiver schematic dated 8/18/08 that there was a connector for a plug-in board. I assume it was for an I.F. buffer plug-in circuit that connects to J93 for an I.F. tap. I didn’t see that on the KRX3A but the jumper W3 is near connector J78. Is it possible to attach a J309 to

Re: [Elecraft] Sub Receiver & KBPF3

73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of wa9fvp Sent: Saturday, April 15, 2017 1:27 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Sub Receiver & KBPF3 I just installed the Sub receiver and the KBPF3A in my K3S. I

[Elecraft] Sub Receiver & KBPF3

I just installed the Sub receiver and the KBPF3A in my K3S. I have one complaint and one concern. First the activation of the KBPF3A is very vague. It's mentioned in the users manual on page 60 (the configuration menu) but there's nothing that says, while in (CONFIG:KBFP3) that you have to

Re: [Elecraft] Sub Receiver Questions

On Mar 27, 2017 7:22 PM, "wa9fvp" wrote: While receiving on 20 meters, for example, on the main Receiver, can I receive another band using the Sub-Receiver connected to the Receiver In port? If CONFIG:VFO IND is set to YES, use the AUX port for the SubRx antenna instead

[Elecraft] Sub Receiver Questions

While receiving on 20 meters, for example, on the main Receiver, can I receive another band using the Sub-Receiver connected to the Receiver In port? I understand that the Sub receiver's audio is fed to the other stereo channel but is that true for the Line Out port? Can the Sub-Receiver feed

[Elecraft] Sub Receiver RTTY Decode

I am using a Navigator interface with an Elecraft K3. The Navigator is connected to the K3 with a factory made cable. The system works great on channel one with HRD/MMTTY/MixW software. I would like to be able to decode RTTY received on VFO B of the K3 when working DX split. The K3 line out

Re: [Elecraft] sub receiver

Wayne, as usual, gave a concise answer. If you DX, it's a great tool to add BUT: you want to consider a P3 if you don't already have one. It's difficult to say which is better if you have a limited budget and depends on if you're audible or visual oriented. A sub-receiver for planning your DX

Re: [Elecraft] sub receiver

On 10/30/2013 11:17 PM, Rick Bates wrote: If you DX, it's a great tool to add BUT: you want to consider a P3 if you don't already have one. Strongly agree. I've got P3s for both rigs in my SO2R setup, and take them to FD and CQP expeditions, and both rigs in my SO2R setup have the SubRX. The

Re: [Elecraft] sub receiver

[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Alan Grant Sent: Wednesday, October 30, 2013 10:23 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] sub receiver I am a very happy owner of a K3 (whole system) but I did not order the sub receiver, what am I missing out on VK4KO

Re: [Elecraft] sub receiver

I have a K3 with a second receiver that I use rarely but I enjoy having it for DX pileups that work split. It has saved me buckets of time getting through the pileups. I also plan to use it this winter for receive antennas for the lower bands. However since I am into 6m I find having a visual

[Elecraft] sub receiver

I am a very happy owner of a K3 (whole system) but I did not order the sub receiver, what am I missing out on VK4KO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] sub receiver

Your question assumes that we know how you operate and what you want out of your station. There is no way we can know this. Think about how you operate and what you could do with a second receiver and then decide if you need or want one. If you don't know why you might need or want a sub

Re: [Elecraft] sub receiver

Hi Alan, The sub receiver has a few primary uses: - Monitoring one frequency (even on a different band) while operating on another. You might be waiting for a sked or a band opening, or waiting for a chance to call one station while tuning around looking for others. Very useful for hunt 'n'

[Elecraft] Sub receiver set up

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

[Elecraft] Sub Receiver Band Independence?

Hi, the bottom right of page 37 says hold BSET, then tap BAND to select the SUB receiver's band.  Why can't I get that to work? Ken VE3YK Lake of Bays Ontario. __ Elecraft mailing list Home:

Re: [Elecraft] Sub Receiver Band Independence?

in MENU set VFO IND to no On 8/11/2012 13:14 PM, Ken Pyke wrote: Hi, the bottom right of page 37 says hold BSET, then tap BAND to select the SUB receiver's band. Why can't I get that to work? Ken VE3YK Lake of Bays Ontario. __

Re: [Elecraft] Sub Receiver Band Independence?

More correctly, in CONFIG, set VFO IND to yes.. typed too fast... Mike On 8/11/2012 13:39 PM, Mike Cox wrote: in MENU set VFO IND to no On 8/11/2012 13:14 PM, Ken Pyke wrote: Hi, the bottom right of page 37 says hold BSET, then tap BAND to select the SUB receiver's band. Why can't I get

[Elecraft] Sub-Receiver

Hello Group  I am getting ready to add some items to my K3; ATU, couple of filters and the general coverage receive option.  I am looking at adding the sub-receiver too.  Is that as daunting as it looks? Thanks. Larry, KN8N __

Re: [Elecraft] Sub-Receiver

On 5/11/2012 9:42 AM, Larry Boekeloo wrote: I am looking at adding the sub-receiver too. Is that as daunting as it looks? It's a bit of a shoe-horn job to cram the sub-RX into the chassis once you've got it built, but otherwise no big deal. It's not bad enough to avoid doing, but enough of a

Re: [Elecraft] Sub-Receiver

Larry, Cannot do without the sub Rx. Definitely worth it! It is quite easy to build it into the K3. See this: http://www.youtube.com/watch?v=5EJL8SlJ_L8 73, Arie PA3A Op 11-5-2012 18:42, Larry Boekeloo schreef: Hello Group I am getting ready to add some items to my K3; ATU, couple of

Re: [Elecraft] Sub-Receiver

Adding the sub receiver is not that bad. Just take your time. Mike W0MU W0MU-1 CC Cluster w0mu.net On 5/11/2012 12:13 PM, Arie Kleingeld PA3A wrote: Larry, Cannot do without the sub Rx. Definitely worth it! It is quite easy to build it into the K3. See this:

Re: [Elecraft] Sub-Receiver

One word of caution with sub receiver. Take your time and be careful with back of sub receiver near the IO board. There are a couple of surface mounted caps on the IO board and you can damage them if you are not careful. 73 Dave wo2x Sent from my iPhone On May 11, 2012, at 2:47 PM, W0MU

Re: [Elecraft] Sub-Receiver

Installing the sub receiver is much easier if you remove the left side panel (as long as you do not also have the 2M transverter). With the left side off it is much easier to maneuver and line up the sub RX. It certainly allows you to see all the connections, etc. 73, ... Joe, W4TV On

Re: [Elecraft] Sub-Receiver

[mailto:li...@subich.com] Sent: Friday, May 11, 2012 3:57 PM To: Phil LaMarche Subject: Re: [Elecraft] Sub-Receiver Dick and others have pointed you to the help file in the K3 Utility. See particularly the section Forcing the K3 into Firmware Load Required mode. If you do not receive the K3 boot

Re: [Elecraft] Sub-Receiver

From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] on behalf of Jim Brown [j...@audiosystemsgroup.com] Sent: Friday, May 11, 2012 12:20 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Sub-Receiver On 5/11/2012 9:42 AM, Larry Boekeloo wrote: I am looking at adding

[Elecraft] Sub-Receiver sold...FS roofing filters

Greetings from Snowy Michigan, I want to thank all of those who inquired about my KRX3 Sub-receiver. It was sold after I stripped 3 of the roofing filters from the unit. I now have 4-8 pole roofing filters for sale. Asking $125.00 each shipped to your qth at my expense and insured for the

Re: [Elecraft] sub receiver

You're gonna love it! Tom, N5GE licensed 1976 as WN5QGE The marvel of all history is the patience with which men and women submit to burdens unnecessarily laid upon them by their governments. George Washington. On Thu, 9 Feb 2012 11:40:02 -0600, k...@att.net wrote: I've had my ticket since

Re: [Elecraft] sub receiver

...@mailman.qth.net] On Behalf Of n...@n5ge.com Sent: Friday, February 10, 2012 12:21 PM To: k...@att.net Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] sub receiver You're gonna love it! Tom, N5GE licensed 1976 as WN5QGE The marvel of all history is the patience with which men and women

Re: [Elecraft] Sub receiver

Undoubtedly the sub-rcvr is a lot more convenient for this purpose, but you can follow the split action pretty well using dual VFO and REV button on a single receiver. With a little practice you can spin the VFO with your thumb while momentarily depressing the REV button with the middle or index

[Elecraft] sub receiver

I've had my ticket since 1974 (WN4IKG) I have owned over 25 rigs but never had one with two receivers. I 've always worked split with two VFOs but after a few emails from you guys and thinking about it (brain taxing) I can see where the second receiver would be useful. When I was working the

[Elecraft] sub receiver and Elecraft cheerleaders.

You probably have noticed, there are a lot of Elecraft missionaries lurking in the weeds here. 73 Joe K2UF I'm one of them. I have built and operated a K1 and two K2s and I'm really looking forward to the K3. Oh yeah, I also have a KPA500. John KE4D

Re: [Elecraft] sub receiver

Back in the days when I had a TS-940 I made a very handy mod. Since I used a headset and didn't need the up/dwn connections on the microphone jack, I brought out the REV and A/B VFO lines. I had a small minibox with three nice big pushbuttons attached to a three foot cord that was connected

Re: [Elecraft] sub receiver

John, That's one of the great things about the K3. If you decide later on a Sub Receiver would be nice you can always add it then. Rick K6LE On 2/9/2012, at 9:40 , k...@att.net k...@att.net wrote: I've had my ticket since 1974 (WN4IKG) I have owned over 25 rigs but never had one with two

[Elecraft] Sub receiver

Ok guys, I get it. I've always worked split with dual vfos but I see the advantage of the ability to hear the other guys instead of shooting blind and hoping the dx staion picks me up. If you don't have something, you don't know you need it! I'll put the sub receiver on the buy list.

Re: [Elecraft] Sub receiver

...@mailman.qth.net] On Behalf Of John's email Sent: Wednesday, February 08, 2012 10:04 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Sub receiver Ok guys, I get it. I've always worked split with dual vfos but I see the advantage of the ability to hear the other guys instead of shooting blind

[Elecraft] Sub-receiver

When switching the sub-receiver ON does your VFO B frequency display momentarily display J before the frequency comes up? 73, Roger __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] Sub-receiver

Roger, I suspect what you are seeing is the description you set for your second antenna since the K3 quickly displays the second antenna when you turn on the SUB. Rick K6LE On 4/15/2011, at 4:04 , Roger D Johnson wrote: When switching the sub-receiver ON does your VFO B frequency display

[Elecraft] Sub Receiver

How does one go about using the key pad to key-in a frequency to the Sub Receiver? I see nothing in the K3 Manual on this. Norm AAV5VW / KB8EEF $12/Month Auto Insurance Drivers in your area are paying as low as $12/m. Free Quote

Re: [Elecraft] Sub Receiver

Norm, There may be better ways but what I do is use the A/B button, set the frequency and then A/B back. Rick K6LE On 6/22/2010, at 4:25 , Norman L Zinn wrote: How does one go about using the key pad to key-in a frequency to the Sub Receiver? I see nothing in the K3 Manual on this. Norm

Re: [Elecraft] sub receiver question... 3db loss w/ 2 rcvrs

I heard an ICOM employee explain that the 7700 was better than the 7800 because the 7700 did not have the 3db loss ... because it only had one receiver in the 7700 ! wow ..that must make it a contest set . i certainly don't mind the split loss in the 7800 or the k3.. I had

Re: [Elecraft] sub receiver question... 3db loss w/ 2 rcvrs

Bill NY9H wrote: I heard an ICOM employee explain that the 7700 was better than the 7800 because the 7700 did not have the 3db loss ... because it only had one receiver in the 7700 ! wow ..that must make it a contest set . i certainly don't mind the split loss in the 7800 or the

Re: [Elecraft] sub receiver question

@mailman.qth.net Sent: Friday, October 16, 2009 8:12 PM Subject: [Elecraft] sub receiver question I own K3 # 3355. Love it. Only thing I do not have is the digital recorder and the sub receiver. I am considering the sub receiver. I read in the operating manual that there is a -3 db loss when both

[Elecraft] sub receiver question

I own K3 # 3355. Love it. Only thing I do not have is the digital recorder and the sub receiver. I am considering the sub receiver. I read in the operating manual that there is a -3 db loss when both receivers are using the splitter (common antenna). Is that interpretation correct ? I would

Re: [Elecraft] sub receiver question

jim danehy wrote: I own K3 # 3355. Love it. Only thing I do not have is the digital recorder and the sub receiver. I am considering the sub receiver. I read in the operating manual that there is a -3 db loss when both receivers are using the splitter (common antenna). Is that

Re: [Elecraft] sub receiver question

Jim: I don't even notice it. The noise is similarly halved, so I just turn the gain to a comfortable level. The loss is that half the signal is going to each receiver. Others can explain it more technically, but I don't notice this loss Dick, K6KR Sent from my iPhone On Oct 16, 2009, at

Re: [Elecraft] sub receiver question

Jim Danehy wrote: I own K3 # 3355. Love it. Only thing I do not have is the digital recorder and the sub receiver. I am considering the sub receiver. I read in the operating manual that there is a -3 db loss when both receivers are using the splitter (common antenna). Is that

Re: [Elecraft] sub receiver question

On Fri, 16 Oct 2009 16:17:18 -0700 (PDT), Bill W4ZV btipp...@alum.mit.edu wrote: jim danehy wrote: I own K3 # 3355. Love it. Only thing I do not have is the digital recorder and the sub receiver. I am considering the sub receiver. I read in the operating manual that there is a -3 db loss

Re: [Elecraft] sub receiver question

3dB accross the combiner using both recievers, for low band use not an issue. The digi audio recorder is great. On air play-back is excellent. cheers Paul zl1ajy I own K3 # 3355. Love it. Only thing I do not have is the digital recorder and the sub receiver. I am considering the sub

Re: [Elecraft] Sub receiver crosstalk

Brett wrote: Ok so I just found a problem when digging around in the radio. Looks like the screw in the top of the KAT3 board wasn't replaced. Putting that screw back in makes the radio show the signal at S1. -- Good eyes! That's a real easy one to forget

[Elecraft] Sub receiver crosstalk

Just to be sure... I've got a 50uV signal being injected into ANT1 of the KAT3 and a dummy load connected to ANT2. I hear the signal on the main RX at S9 and heard the signal on the SubRX (listening to the dummy load) at about S2.5 (the third light is flickering). I'm not really able to affect

[Elecraft] Sub Receiver jones...

Listening to K5D last night made it obvious to me (I'm slow...) the benefit of a sub-receiver. The exchanges that occur by the pursuers are impossible to find by switching back and forth between pursued and pursuer frequencies. I'm assuming that the pursued will take the next call somewhere near

Re: [Elecraft] Sub Receiver jones...

Jim, Being in split mode and pressing *AND HOLDING* the REV button allows you to listen on the split frequency until you release the REV button. Us old Kenwood guys got used to the T-F Set button for this function. It's not as good as having a dual receiver, but you can develop the skill required

Re: [Elecraft] Sub Receiver jones...

- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of w...@w5ov.com Sent: Monday, February 16, 2009 10:46 AM To: Jim Miller Cc: Elecraft Reflector Subject: Re: [Elecraft] Sub Receiver jones... Jim, Being in split mode and pressing *AND HOLDING* the REV button

Re: [Elecraft] Sub Receiver jones...

Jim Miller wrote: Listening to K5D last night made it obvious to me (I'm slow...) the benefit of a sub-receiver. The exchanges that occur by the pursuers are impossible to find by switching back and forth between pursued and pursuer frequencies. I'm assuming that the pursued will take the next

Re: [Elecraft] Sub Receiver jones...

...I am surprised that the K3 would not be able to do dual in band receive or dual watch as some would call it. Early in the design process of the K3 we explored various methods by which we could obtain dual receive capability. Such capability was a basic design requirement. Putting in a

Re: [Elecraft] Sub Receiver jones...

Another solution is to get an LP-PAN panadapter. This gives a great panadapter plus two PowerSDR receivers. This weekend I was able to monitor K5D on the K3 and/or the primary PowerSDR receiver and listen to (and watch) the pileup on the PowerSDR subreceiver. PowerSDR allows you to put the pileup

Re: [Elecraft] Sub Receiver jones...

On Mon, 16 Feb 2009 10:31:20 -0800, you wrote: Below... Jim Miller wrote: Listening to K5D last night made it obvious to me (I'm slow...) the benefit of a sub-receiver. The exchanges that occur by the pursuers are impossible to find by switching back and forth between pursued and pursuer

[Elecraft] Sub-receiver or 2 k3's

I was going to install the sub-receiver in my K3. Then I thought it might me advantageous to have a second K3 instead. I need a back up radio also. Are there any opinions? Dave N1IX___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must

Re: [Elecraft] Sub-receiver or 2 k3's

A few weeks ago on this reflector I mentioned that I was using my two K3s for diversity. I have two full station setups (primarily for RTTY contesting), and one is connected to 80/20/10 antennas and the other to a 40/15. Also, each separate station feeds a different side earpiece in my

Re: [Elecraft] Sub-receiver or 2 k3's

for backup, but I would trade a well used TS 850 or a lightly used TS 440 for a second K3 without hesitation Willis 'Cookie' Cooke K5EWJ --- On Sun, 1/25/09, N1IX n...@verizon.net wrote: From: N1IX n...@verizon.net Subject: [Elecraft] Sub-receiver or 2 k3's To: elecraft@mailman.qth.net Date

Re: [Elecraft] Sub-receiver or 2 k3's

Back in the 1950's the ultimate Ham rig include a kilowatt amplifier for each band, often stacked in a cabinet on the desktop or in a rack alongside the desk (we still had to adjust our transmitters when we QSY'd in those days). Separate amps allowed one to optimize the circuits and have them

Re: [Elecraft] Sub-receiver or 2 k3's

I have a dream :) Wayne Ron D'Eau Claire wrote: Perhaps it's time to revisit that concept with a K3 for each band, or at least a K3 for each mode... --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net

[Elecraft] Sub Receiver thank you

Thanks to all for the help, I knew it would be somthing simple and now I do feel stupid cause it was so simple hi hi but the disp button is burned in my memory bank so it wont happen again... THANK YOU THANK YOU THANK YOU =) Bill N8WS -- View this message in context:

[Elecraft] sub receiver

I have lost my sub reciever and can not find the menu that I changed to make that happen. can anyone tell me what I did wronG and help me get my sub receiver back. what I see now in the B vfo is the time, date, 3 zero's, 13.4v, etc etc. Thanks in advance I know I am going to feel stupid after I

[Elecraft] Sub Receiver Filter Macros

I have been able to set filter macros on the main receiver but now wish set the sub receiver filter macros. I have the sub receiver on and linked (same frequency). I can set the main receiver filter with the macro: k31;is 0550;fw0040; This works as expected (350-750 Hz).

[Elecraft] Sub receiver on the way

Katiegram received for second receiver ordered on Jun 7, 2008. We seem to be advancing through the backlog. Mike Scott AE6WA Tarzana, CA K3/100 SN508 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post

[Elecraft] Sub Receiver Question

How do I get the sub receiver to receive? I can hear my main receiver on the left speaker and static on the right receiver. It sounds like I don't have an antenna on the sub. I checked the sub receiver's frequency with the main receiver and there is activity on the band. -- View this message

Re: [Elecraft] Sub Receiver Question

-.-. --.-N3TU -.-. --.- wrote: How do I get the sub receiver to receive? I can hear my main receiver on the left speaker and static on the right receiver. It sounds like I don't have an antenna on the sub. I checked the sub receiver's frequency with the main receiver and there is activity on

Re: SV: [Elecraft] SUB receiver

Thanks to all for the input. It turned out to be a faulty stereo phone plug. All is working OK now Dave, W5UN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change,

RE: SV: [Elecraft] SUB receiver

The procedure in the KRX3 manual will be reworked to clearly spell out the need to do the KRX3 checkout procedure before connecting any external devices to the K3, including speakers, phones, etc. That's why it says to set SPKRS to 1 so the internal speaker will provide subreceiver audio. It

[Elecraft] SUB receiver

I got my K3 yesterday and am learning. But I have not figured out how to hear sound from the SUB receiver. Yes, KRX3 is installed. How does one activate audio out of the SUB rcvr? Dave, W5UN ___ Elecraft mailing list Post to:

Re: [Elecraft] SUB receiver

On 10/22/08 10:12 PM, Dave Blaschke wrote: I got my K3 yesterday and am learning. But I have not figured out how to hear sound from the SUB receiver. Yes, KRX3 is installed. How does one activate audio out of the SUB rcvr? Have you read page 37 of the owner's manual ?? ~Iain

[Elecraft] Sub receiver installation

How difficult is it to install the sub receiver in the K3? How much time does it take? Considering taking delivery of K3 without the sub receiver installed.. Mike Miller KA5SMA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a

RE: [Elecraft] Sub receiver installation

How difficult is it to install the sub receiver in the K3? Depends on one's skill in such things. Some people call it trivial and others think it is a big deal. How much time does it take? As reported on this reflector, experiences have ranged from 1.5 to 4 hours. The instructions are