My thanks to Brian and Don for the prompt assistance.
You are precisely correct, my limits were caused by the dsp settings in
fldigi not those in the K3. Opening the limits in fldigi allowed a max
bandwidth of 150hz to 2850 hz.
AL7CR
On Sun, Aug 14, 2016, at 03:57 PM, brian wrote
in the configuration.
Thanks in advance for the help.
AL7CR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
I wish to be able to recieve and transmit using the WSJT-X JT65 + JT-9
mode. I know from archived posts on this subject that my recieve
bandwidth using a 6 Khz filter in Data-A will be approximately 300 -
4200. The question is can I also transmit in this range in Data A? I
do not want to buy
Can anyone provide a working link to and/or a copy of the K3timewin
program? Yes, I KNOW you can set the time from the K3utils program. I
want to experiment with running this program on a schedule and can not
find a copy.
BTW a hundred "the clock does not keep time" messages ago it was noted,
I am tempted to try one of the Chinese made filters listed for sale on
Ebay. Does anyone have any experience with using one? I am
considering the 1.8khz.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
with RemoteHamRadio would require only a K3/0 mini which is a pretty
sweet deal.
Hopefully someone had already tested this system. I would rather not
have to buy a K3/0 Mini to test it. It is tempting though ..
AL7CR
__
Elecraft mailing
thought it was a strange feature ...
Dean Shutt AL7CR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
I am working on remote control of my K3S in Data A mode. I was pleased to see
that a recent version of Win4K3 displays the ALC on transmit. I discovered
however that the mike gain control in Win4K3 does not control line in when
using Data A as it does on the radio but continues to control the
I was experiencing broadband noise on the spectrum generated from my RX I/Q
port when the KX 3 ACC port was connected via USB to my laptop. I tried
grounding, different USB adapters and cables, and ferrite toroids without any
success. All the gear is powered by battery.
I suspected a ground
sults. Should the KX 3
give an SWR reading into a dummy load at .5W output? If so, what can be done
to adjust my unit.
73 de AL7CR
On Mon, Feb 26, 2018, at 4:57 PM, Wayne Burdick wrote:
> Hi Dean,
>
> The latching relays in the tuner should work just fine at low supply
> volta
I just completed installation of a used KXFL3 into my recent model KX3
and discovered a few oddities.
My KXFL3 has 10 pins not 12 as in the original version and not 9 as in
the tuning noise mod. Was this an interim configuration? Did the
noise mod only cut two pins initially? It seems to work
My KX3 internal tuner works perfectly at transmit voltages above 10v. Below
that value it will initiate tuning but finish at an SWR of between 3 and 6.
When this happens if I connect my station 13.6v supply or an external 12v
battery supply it will immediately tune to the expected low SWR.
I have been down this route on numerous Macs under many versions of OS X. The
absolute "gold standard" is the Tripp-Lite Keyspan USA-19HS. They are
expensive but they just work on OS X. I keep them in stock for projects.
Available on Amazon.
AL7CR
On Fri, May 17, 2019, at 10:2
set at 2 I believe. Once you do this you should be able to
more finely control the drive level.
This is likely to fix your problem at once.
AL7CR
On Sun, Feb 2, 2020, at 3:59 PM, Lee Murrah via Elecraft wrote:
> I am running WSJT-X in FT8 mode on my K3S using the onboard sound card
> and U
I have tried but rig TX control is seriously broken for the K3 in WSJT-X on the
Pi. Online sources all point fingers at each other and I could find no
solutions. Flrig control works perfectly but NOT with WSJT-X. You might be
able to use VOX.
Be ready for a major hassle.
On Mon, Jan 20,
So do a lot of others but problems are with the K3.
On Tue, Jan 21, 2020, at 2:53 AM, Paul Kiciak wrote:
> I use CAT between my KX3 and Pi 4B and WSJT-X and JTDX running
> on the Pi both work fine.
>
> Paul N2PK
> __
> Elecraft mailing
I used an SDR-IQ connected directly to the IF out for many years with no
problems whatever.
On Sun, Jan 5, 2020, at 2:29 PM, weaverwf wrote:
> For those of you using an SDRplay as a panadapter with the K3S, what RF
> protection do you use for the SDRplay?thanks and 73,Bill WE5PSent using
>
Last year you mentioned the availability of test firmware to improve the
ability of the KX3 antenna tuner to achieve a solution with low power. Did the
change succeed and is the firmware available?
__
Elecraft mailing list
Home:
lid color. I’ve never seen
> it do what I think you are describing.
>
> Have no idea why that might be happening. Have you checked the
> connections between the KX3/PX3?
>
> Grant NQ5T
>
> > On May 19, 2020, at 1:13 PM, AL7CR wrote:
> >
> > On my P3
On my P3 connected to my K3S when I transmit the display is frozen and shows
the last spectrum.
I just noticed that on my PX3 connected to my KX3 that during transmit the
current filter display covers the spectrum with a solid color.
This does not matter much but I prefer how the P3
What is the height of the front top edge of the K4 / SP4 with the bale
extended? I need to modify my custom K3 line cabinet for the new rig. Thanks.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Looks like it is available here:
https://kx3-blog.de/?p=200
On Sat, Jun 13, 2020, at 8:02 AM, Grant Youngman wrote:
> So given that this is on a German blog site, I’m going to guess that
> it’s third party and not straight from an Elecraft test bench (?).
> Does it report out null depth
and get them from the factory
tomorrow.
Thanks for the help.
AL7CR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
in the near future. There must
be more KPA/KTA 500 out there than KPA 1500 by a huge margin.
AL7CR
On Sun, Jul 19, 2020, at 1:52 PM, Wayne Burdick wrote:
> Those using a K4 transceiver with our KPA1500 amp will have the
> advantage of +/- 1 kHz resolution in VFO tracking. In many st
Will the K4 panadapter be able to show the position of the manual notch? It
could be displayed as a different color background similar to how the receive
filter is shown on the P3. It would be a very useful feature.
__
Elecraft
There are a variety of reports on doing this ranging from it being impossible
to no changes are required. In my experience it runs perfectly and is a joy to
use. There is only one difference between using Apple Silicon and any other
Mac.
My setup is:
KX3
Base configuration M1 Macbook
Apple
Please list your TXEQ settings.
On Thu, Jun 17, 2021, at 12:42 AM, Jim Brown wrote:
> Heil products are wildly overpriced and highly over-rated. No ham needs
> a boom mic headset better than a Yamaha CM500, which sounds great both
> in the headphones and one the air, is very comfortable, costs
as one lot is $3200 Shipped in the US.
Contact me directly al7cr AT mooseaviation.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
This KXPA100 received new finals at Elecraft in 2019 and has been used for less
than ten hours since that time. All the original cables are included as well
as a KXPACBL KX3 adapter cable.
$1250 via Paypal including US shipment.
__
I am selling my fully equipped KX3 / PX3 / KXPA100 station.
All of the gear looks and functions as new. The KX3 has every option except the
KXPD3 keyer paddle. The KXPA 100 received new finals at Elecraft in 2019 and
has been used less than ten hours since that time.
A set of manuals is
When the input signal is too high no ALC is shown in data mode. Reduce the
input to a minimum and gradually increase the KX3 gain and the ALC will appear.
You would think that high input would show max ALC bars but that is not how it
works. Same problem took me several hours to troubleshoot
A PX3 in like new condition with KX3 interconnection cable, power cable, and
manual. The current Elecraft price is $730.
$525 via Paypal shipped in the US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Nothing to it, you will be done in no time. The right size screwdriver helps.
Also try not to get fingerprints on the screen side of the lens. Taking the
lens off to clean them is a bit annoying.
On Thu, Sep 30, 2021, at 12:34 PM, Julia Tuttle wrote:
> Hi folks,
>
> I got jealous of the
Moderator save us … PLEASE
On Sun, Jan 2, 2022, at 7:12 AM, Dr. William J. Schmidt wrote:
> During my under-graduate and graduate school careers, I worked at
> Honeywell's circuit board fabrication shop for about a year and a half. We
> had two machines in the shop that dealt with flux: a reflow
A classic problem. You have TOO MUCH input gain. Counterintuitively the KX 3
ALC will display nothing if over driven. Turn the input way down and then
increase in small steps. You will find the right setting to show ALC that way.
On Tue, Nov 23, 2021, at 2:57 PM, Frank O'Donnell wrote:
>
I am offering my KX3 for sale. It is in very nice condition and functions as
new. All the available internal options are installed. It will ship with the
full original cable set, the printed manuals, and the accessories listed below.
The installed options are:
KXAT3 20 watt ATU
KX3-2M 2
HyperX - Cloud Alpha Pro Wired Stereo Gaming Headset
comes with cable to plug into rear mike and headphones jacks, bias on, works
perfectly
On Fri, Jan 28, 2022, at 11:06 AM, Bill Weaver wrote:
> Wayne,
>
> I’ve used both on the K3S
> Kenwood MC-60 w/std. Kenwood 8 pin connector
> Heil HM-10
My setup is like yours and the response is exactly the same. Starting use on
fan speed 4 delays the temp rise for a short time. Mine has run many many
hours at temps up to 70 with no problems. Hottest on 20m and requires the
most drive on that band also.
On Sun, May 14, 2023, at 10:23
Check eBay. One was just listed.
On Mon, Mar 18, 2024, at 10:26 AM, Josep via Elecraft wrote:
> Looking for a KPA500 for my Remote station, does anyone have any that
> don´t need/use anymore..?
> Thanks,
>
>
> 73,
> JosepEA6BF
> BUG #256 - CWOps #3072 - FOC #2182 (ex 1724) - CTDXCC - HSC
39 matches
Mail list logo
