now this is why you want an air dielectric on your coax that way you can
hook a heat gun and blow hot air up to the frozen rf and thaw it out.
you could also try cognac after a few you won't care about the frozen rf
another thing is to get a couple dozen young hams together give them each a
I have a fluke 112 and I love it and hate it the auto ranging is great but
the auto shut off is a pain in the *** well you get the point but I would
recommend the fluke 112 to anyone with that warning.
- Original Message -
From: R. Kevin Stover [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
done to
the unit was the shield mod on the kpa 100 did not have a chance to check it
out after words so any ideas as to where to begin?
see ya
73's
N1IB
David Schornak
K2 03027
arf
don't forget me
Mis Ginger
___
Elecraft mailing list
Post to: Elecraft
100 so I will start the diagnosis of that on
Saturday.
- Original Message -
From: Gary Surrency [EMAIL PROTECTED]
To: 'W3FPR - Don Wilhelm' [EMAIL PROTECTED]; 'David'
[EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Friday, January 14, 2005 1:17 PM
Subject: RE: [Elecraft] receive problem
which part numbers do I need to order to have a complete k1?
k1 all band possible noise blanker battery and tunner
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change,
I bought the kpa100mdkt kit and in reading the instructions it says to
remove the circuit board from the heat sink which means you have to remove
the screws that hold the transistors to the heat sink when I reinstall the
transistors won't I need new heat sheilds under the transistors or can I
would this include am as well as cw and upper and lower side band???
if so count me in. for at least one maybe two have to sell my halicrafters
sx99 to buy this one
- Original Message -
From: Lonnie Juli [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Sunday, January 30, 2005
not sure what that is
- Original Message -
From: S55M [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Monday, January 31, 2005 3:54 PM
Subject: Re: [Elecraft] 2 k2
Ever tought abt SO2R contesting?
- Original Message -
From: David [EMAIL PROTECTED]
To: Elecraft
, 2005 3:41 PM
Subject: Re: [Elecraft] 2 k2
David wrote:
okay I am a bit naive here but why would anyone need two k2s?
OK, how about listening to 50.125 with the Elecraft transvertor while
on the low bands?
My wife (W8IIE) gave me my first K2 as a consolation prize for turning
50. I
I was wondering how does everyone keep there elecraft battery in the k2
charged up and ready to go?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
I could not remember if the battery was charged through the 12 volt supply
- Original Message -
From: W3FPR - Don Wilhelm [EMAIL PROTECTED]
To: David [EMAIL PROTECTED]; Mailingliste Elecraft
elecraft@mailman.qth.net
Sent: Tuesday, February 01, 2005 9:43 AM
Subject: RE: [Elecraft] K2 BAT
and everything worked for me.
- Original Message -
From: [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Saturday, February 05, 2005 9:46 PM
Subject: [Elecraft] SSB board install - RF board OK - thanks!!!
Thanks folks -
I love this reflector!! Thanks to Don, David, Gary
and here I thought only k2's where addictive and the smell of melting solder
and the odor of new electrical parts and pc boards now those things are
really addictive.
- Original Message -
From: Fred Jensen [EMAIL PROTECTED]
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Friday,
but the color he wants is what is locked up under heavy guard.
- Original Message -
From: W3FPR - Don Wilhelm [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Monday, March 07, 2005 9:45 PM
Subject: RE: [Elecraft] K1/K2 Paint Color
There must be 'spray paint thieves' about (or
what about war peace and raise the speed with each chapter
- Original Message -
From: W3FPR - Don Wilhelm [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Tuesday, March 08, 2005 11:12 AM
Subject: RE: [Elecraft] CW
There is also a free program that I like called WinMorse
I have the setup that way and yes you will need the kio2 to make it all easy
to hook up it can be done with out it but you have to make a special cable
so it was easier to put the kio2 in and have it for when you go qrp and have
it for when you go qro.
- Original Message -
From: [EMAIL
to pickup the wwv signal decode it and keep the clock
set to the right time then to really make it nice give it a either net port
and allow it to serve up the time of day on our personal networks
now that would be a great little time piece for the shack
see ya
73's
N1IB
David Schornak
K2 03027
yes you are right we should wait for Eric and Wayne to talk first
but it is hard to wait
- Original Message -
From: Lee Buller [EMAIL PROTECTED]
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Monday, April 25, 2005 4:37 PM
Subject: [Elecraft] Premature Emails on the Amp $$$
MY kpa 100 and kat150 don't have a power switch and they are in the
separate ec2 case when I turn the k2 on everything comes on. Or am I
missing something
see ya
73's
N1IB
David Schornak
K2 03027
www.n1ib.com
www.n1ib.com/blog/
www.n1ib.com/leather/
arf
don't forget me
Mis Ginger
Take lots of pictures shoot a video of the assembly make a power point
presentation and send it to your friends when you get the rig done after
all you only build your first k2 once.
see ya
73's
N1IB
David Schornak
K2 03027
www.n1ib.com
www.n1ib.com/blog/
www.n1ib.com/leather/
arf
don't
I thought is said incase of emergency break glass
Years ago the Apple Computer company had the framed prototype of the
Apple 1 on their wall like a picture. With a note under it saying OUR
FOUNDER. Been some time, not sure if its still there.
Enjoy
73 Bob W7AVK
Steven Pituch wrote:
On July 14th my k2 (along with my ts2000, ts450, tmd700) where damaged
when my next door neighbor's house got hit with lightning. Now my k2
will not put power out over 2 watts max it will adjust down but not up
anyone got any idea where to begin to look at what took the damage. What
stinks about
Does anyone know what the power supply requirements are going to be for
the elecraft amp when it is ready for sale?
I have to replace mine now and figure I might as well buy one big enough
to handle it as I plan to get one when it becomes available.
___
Well I have ordered a second k2. my first k2 got hit with lightning so
now I get to repair the first but the insurance is paying for another
cause I don't know if the first is repairable. But I do get to have the
fun of building a second k2.
see ya
73's
N1IB
David Schornak
K2 03027
K2 0
I was told by my agent that they would have covered the my labor if I
had asked for it but I did not because it was just to much fun to build
and they are letting me the damaged equipment and I think I can rebuild
the first k2 and get it working a hundred percent. It is all covered by
my home
-To: [EMAIL PROTECTED]
To: 'David' [EMAIL PROTECTED], 'K. J.'
[EMAIL PROTECTED],elecraft@mailman.qth.net
Subject: RE: [Elecraft] MY SECOND K2
Date: Mon, 29 Aug 2005 10:05:32 -0400
Every cloud has it's silver lining - have fun building that second K2!
73,
James Kern KB2FCV
-Original Message
How many of you have bought a spare k2 and inventoried it than put it
back in the box and have it on a shelve waiting for the price to go up
like heath kits have done?
see ya
73's
N1IB
David Schornak
K2/QRO 03027
K2/QRP 05091 TO BE BUILT
www.n1ib.com
www.n1ib.com/blog/
www.n1ib.com/leather
of
changing a capacitor and re-alignment. It may struggle to get the full 3MHz
for 435-438MHz.
73 de David VK5DG
On Mon, 23 Jun 2008 10:53:06 pm Keith Bainbridge wrote:
I've just picked up a 2nd K2 and wondered just how good it would be on
satellites with the elecraft transverters ( or any
could please make a
suggestion David
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
.
Hope this helps.
73 de David VK5DG
On Saturday 18 August 2007 07:07, Bob Jones wrote:
Hi
my K2/100 Nr 5336 has fallen out with my PC - they've stopped talking
to each other. I use microHAM's USB device router and a number of
serial to USB adapters, all of which have worked fine until now
G'day Chris,
You can put me down on the list. Happy builder/owner of K2 s/n 5492, XV144,
T1, N-gen and XG-1 as well. I doubt there are enough of us to qualify for an
elecraft century club award but you never know. I'd invite the ZL's too.
73 de David VK5DG
On Sunday 16 September 2007 19
and not through the main amplifiers.
I don't know if anyone has tried using their K3 with the XV144 or XV432
transverters yet.
73 de David VK5DG (when the new tower is up and antenna installed, then I'll
get on the queue).
___
Elecraft mailing list
Post
feedline from my antenna
to my balanced antenna tuner through steel? Also, my antenna is away from
the shed so the feedline would not approach the shed at a perpendicular
angle.
73 de David VK5DG
K2 S/N 5492
___
Elecraft mailing list
Post to: Elecraft
another 2MHz on
top to each to work the local FM repeaters would be a bonus.
73 de David VK5DG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Hey I did not see the press release is it on the web site anywhere?
The KPA800 and 1500 both use the same desk top size enclosure. (I
only had a picture of the 800 for the news release.)
We move the power supply out of the 800 case and add a 2nd set of
RF decks for the 1500. And we also
Wait Scotty showed the guy in san fran sisco the formula for transparent
aluminum when they came back in the klingon war bird to get the two hump
back whales so we got to have it by now either that or that guy is sitting
on a gold mine.:)
-Original Message-
From: [EMAIL PROTECTED]
JUST REMEMBER SET UP The video camera and take pictures and shoot the movie
than spend some time narrating it and add some back ground music then you
can give the DVD out for Christmas presents and save money so you can buy
even more elecraft goodies.
-Original Message-
From: [EMAIL
flashing the
'c' character, than when normally transmitting.
More an observation than a problem that must be fixed.
73 de David VK5DG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
I would not let him build one because he begs entirely to much makes me
wonder what he is up to.
Subject: Re: [Elecraft] Let me build your K2
At least one less than his desired number ...
Go ahead and brag, just HOW many is it by now ?
see ya
73's
N1IB
David Schornak
K2/QRO 03027
K2
Hey it only took you nine days to advertise again amazing in that time I
have seen no one else advertising
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan
Sent: Monday, September 26, 2005 4:37 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Let
All unbuilt and in the original boxes
K2 transceiver kit no 5091 $599.00
K160rx $39.00
Kaf2 $79.00
Kat2 $159.00
Kbt2 $67.00
Kio2 $89.00
Knb2 $39.00
Ksb2 $99.00
Prewound torrids for above kits $85.00
Total kit worth $1,255.00
Will sell it all for $1,100.00 to one person or will break it up and
The k2 and stuff is sold thanks
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David
Sent: Thursday, October 27, 2005 8:25 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K2 and stuff for sale
All unbuilt and in the original boxes
K2 transceiver
Hey just remember to take lots of pictures as you build the rig
otherwise you will have to buy another just to be able to relive the
thrill of building your k2
Serial number 5324 will be started later today so everyone can
expect
___
Elecraft
A friend asked me yesterday if I knew why hams would be sending the
following
Cq cq callsign callsign test test
In cw over and over and over again I told him I did not, I could not
find anything on the internet about it so I thought I would ask the most
august body of hams for information. The
One benefit you take the qrp rig and leave the rest at home just by
disconnecting a couple cables and changing a couple of setting in the
menu. You will need to add the kio2 to the base k2 otherwise it works
great.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
I have built one k2 and I did not want to wind my own toroids so I
bought them from the toroid guy I liked what I received and how they
werer packaged so much so that I bought another k2 with all the options
and a set of toroids to put up in my closet to save for that day when I
can put it unbuilt
Test
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David
Sent: Friday, March 17, 2006 4:45 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Testing I keep getting two copies of every email
Test
___
Elecraft
Oh you must be talking about the foreign exchange student from Cardiff
south Wales who in the middle of a class raised her hand ask the teacher
if she could borrow a rubber. I let you figure out what she was really
asking for
___
Elecraft mailing list
When using REV button on K3, P3 display frequency marker freezes and does not
track K3 frequency change - anyone else seeing the same problem? Firmware is
036 for P3.
Only soloution is to switch P3 off and back on.
73 Dave G0AIX
__
Using the latest Beta Firmware I notice distortion on the audio when using the
noise blanker even on low settings. This applies whether dsp or if or both are
used. On reverting to Firmware 4.14 no such distortion occurs. Anyone else
have similar problems?
Dave G0AIX
Thanks for a great product, Elecraft. I'm sure the KPA100 will make it
even better!
David Macchiarolo AJ4TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Yes, I thought about that, but I have already invested in the K2, I'll
use that for a while.
On Tue, 2011-01-04 at 08:35 +0800, Johnny Siu wrote:
Hello David,
K2 is a great radio for portable use especially the low standby
current.
However, when you add up all the options in K2, you
an email in their in-box (two, actually).
I am now up to the steps just after installing and winding the large
output transformer.
Kudos (again) for the excellent instructions!
73,
David Macchiarolo AJ4TF
__
Elecraft mailing list
Home
KPA100 is done, and everything checked out. I made a couple of
contacts on 40m SSB. It was nice to see that power meter needle swing
up towards 100W as I was talking.
Thanks again to Richard AD7FZ @ Elecraft for getting the replacement
parts I needed.
73,
David AJ4TF
This has been discussed many times before, Ron, and I believe there was a
warning that the use of heavier knobs could render the Elecraft warranty nul
and void. In the UK we tend to require smaller knobs, but maybe that's
because we have smaller fingers ;-)
73 de David G4DMP
-Original
is
still available, perhaps Elecraft would be prepared to make a special one,
at an appropriate cost of course.
73 de David G4DMP
-Original Message-
From: Don Putnick
Sent: Friday, June 08, 2012 8:21 PM
To: Elecraft List
Subject: [Elecraft] [K3] K3 Plating [was: !]
Wayne,
I really
It was hard to tell, but the model airplane guy in the video MIGHT be
positioning the connectors backwards from the amateur radio accepted
practice.
http://www.powerwerx.com/assembly.asp
David AJ4TF
--
Message: 24
Date: Wed, 5 Dec 2012 13:46:32 -0800
From: Ron
Mine was the same way. No worries, it will be fine.
73,
David AJ4TF
--
Message: 13
Date: Thu, 24 Feb 2011 14:18:11 -0600
From: John Cooper w...@gt.rr.com
Subject: [Elecraft] KPA100 SO-239 Help
To: elecraft elecraft@mailman.qth.net
Message-ID
On Thu, 2011-03-24 at 12:00 -0400, elecraft-requ...@mailman.qth.net
wrote:
I agree. The kitbuilding of the K2 was the main reason I went with it
and not the K3.
73,
David AJ4TF
Message: 23
Date: Wed, 23 Mar 2011 22:47:52 -0500
From: Allen Wisbey, W1SBY al...@thewisbeys.com
Subject: Re
My experience:
Basic K2 Build time: 57 hours over 16 days
Options:
SSB: 13 hours over 4 days
Audio filter: 5 hours
KPA100 build time: 38 hours over 9 days
Total build time: 113 hours
YMMV.
David AJ4TF
--
Message: 2
Date: Wed, 20 Apr 2011 18:57
For sale:
KAF2 - K2 audio filter, assembled working.
Will sell, or trade in part for a KNB2 noise blanker (assembled or kit).
David AJ4TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
electricity? Lightning?
David AJ4TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
the knowledge
you bring to the Elecraft community.
David AJ4TF
On Sat, 2011-06-11 at 18:13 -0400, Don Wilhelm wrote:
David,
Yes, it looks like U5, U6, Q10, Q11 and the associated components are
behaving as they should.
It certainly could be that D16 and D17 are not either open or shorted
voltage of the DMM on the 200K scale). The spec on a 1N5711 is 0.2
uA leakage at 50V.
New diodes are on order.
Thanks again Don,
73,
David AJ4TF
On Sat, 2011-06-11 at 18:13 -0400, Don Wilhelm wrote:
David,
Yes, it looks like U5, U6, Q10, Q11 and the associated components are
behaving
New diodes arrived yesterday, thanks to Richard at Elecraft. After
installation and re-calibration of the SWR/wattmeter, everything looks
good, I made two quick contacts on 20m PSK31, one in Greece, the other
in Slovak Republic.
Thanks again Don, Richard, and Elecraft!
73, David AJ4TF
easy to do the repair again if necessary without de-soldering
and disassembly.
73,
David AJ4TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
to take their time when working on a $1000
piece of equipment. Glad you got it fixed and nothing else was smoked
besides the PC board trace.
73, David
AJ4TF
Message: 7
Date: Thu, 22 Dec 2011 12:08:43 -0800
From: Fred Jensen k6...@foothill.net
Subject: [Elecraft] K2 - Fuses ...A Cautionary
Some links that may be helpful for you:
http://tldp.org/HOWTO/Serial-HOWTO.html
http://tldp.org/HOWTO/Serial-Programming-HOWTO/
73,
David AJ4TF
--
Message: 12
Date: Sun, 29 Jan 2012 12:34:30 -0800 (PST)
From: Neoklis Kyriazis n5b...@yahoo.com
Subject
The K2 cables are not standard RS-232 cables. They only have pins 2,3,
and 5 connected. This is documented in the manuals, you should review
the manuals carefully to make sure you have constructed the cables
correctly.
INFO 080 according to the manual indicates a problem with the I/O
controller
I meant to say, they only have 2,3, and 5 connected at the *computer*
end.
On Sun, 2011-10-02 at 12:37 -0400, david wrote:
The K2 cables are not standard RS-232 cables. They only have pins 2,3,
and 5 connected. This is documented in the manuals, you should review
the manuals carefully
My P3 has developed some white horizontal lines on the screen that come
and go sometimes many and sometimes a few I reseated the ribbon cable
but did not think that to be it anyway and it made no difference.
any ideas
Dave VE3SD (ve3dvy)
.
” connector and a
4mm hole for a banana plug for a radial.
Thanks and 73s
David G7IDB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Hi David,
If the microHam Mac drivers allow you to create
virtual serial ports that are recognized by OS X, then
the digi keyer should work w/o any need for the KUSB.
If not, then you'll need the KUSB. I'm not sure what
chipset the KUSB uses, but there should be OS X
drivers available. I'm using
before I post it here.
dt
.
-Original Message-
From: David Toepfer [mailto:[EMAIL PROTECTED]
Sent: Sunday, June 13, 2004 8:14 PM
To: Chuck Gehring; elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX1 S-Meter Scale and Zero Set confusion
I am not sure it is super critical
connect the +lead of the DMM to + terminal of the PSU,
and the -lead of the DMM to +pin of the power connecter where it enters the
radio?? Is this correct??
Just for interests sake, what am I actually doing at this stage of the
alignment?
Cheers
David, VK2NU
This procedure got an initial nod from Wayne so I am posting it to the list for
broader peer review as it were...
kb3ipe
dt
.
The procedure outlined on p65 in the SIG row of the table for adjusting the
S-meter calibration does not seem to work well for me, so I have developed and
followed
Martin:
After a while, you will just learn to keep the first part in mind.
Something that may help, is to make use of your current ability to get
shorter words. Often you will get several shorter words in a row.
When this happens, get the first one and then, while the second one is
How do I get the K2 into SCAN mode again!!!
I have a mental block happening here.
- Original Message -
From: Steve Jackson [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Sunday, June 20, 2004 11:25 AM
Subject: [Elecraft] NorCal SMK-1 free to good home (CONUS)
I don't know
..
Just need to align some filters now for PSK and RTTY, and I'll be set to
go..
Regards
David, VK2NU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
I'm pretty sure I've made the same mistake during my build process. Thanks
for the tip!
--
It takes brains. It's not like forward, where you can get away with
scoring and not play defense... On defense you have to be thinking.
---Chris Chelios
David M. Katinsky
[EMAIL PROTECTED]
N2RDT
From
a change of mind and has changed the way it
operates in the firmware upgrade. I am surprised there has not been any
further comment about it on the list.
73 de David G4DMP
In a recent message, [EMAIL PROTECTED] said
Hi David,
No - my KX1 has output in the Speed position.
You have to press
is there something
I am overlooking?? if so what? or am I looking at a
mistake in one of my steps?
Thanks
David KR4OW
__
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail
I used to notice that when I was tuning in 1Khz steps my frequency used to
always end up about 30khz or 50khz higher. So from tuning say from 5050.00 to
7070.00 using the 1Khz tuning rate the fine tune frequency read at would be
7070.03 or 7070.05.
Anyway, I did the recalibration of my K2
.
- Original Message -
From: Don Wilhelm [EMAIL PROTECTED]
To: David Walker [EMAIL PROTECTED]; Elecraft reflector
elecraft@mailman.qth.net
Sent: Monday, July 05, 2004 11:14 PM
Subject: Re: [Elecraft] Tuning Rates and fine tune shift.
Dave,
From my observations, if the lower order digits
I just stumbled across the AT paddle, which should fit the bill for people
looking for a non-iambic paddle for their KX-1.
Only problem is, it looks like it is NOT made for an 1/8 plug though. So you
could either ask the maker if he could make one for you, or you could try to
homebrew one.
Hope
I am sorry, I meant to put the URL in this email
http://www.wa3wsj.com/files/ATpaddle/ATpaddle.html
kb3ipe
dt
.
--- David Toepfer [EMAIL PROTECTED] wrote:
I just stumbled across the AT paddle, which should fit the bill for people
looking for a non-iambic paddle for their KX-1.
Only
I know Joe Walsh from the Eagles is an active ham. I was thrilled to have
rx'ed an email from him a few years ago. He's a Colin's collector and does
alot of 10mx AM ops.
Cheers all,
Dave.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
After completing assembly of a fully kitted KX1 but only trying occasionally to
make a contact I was able to muster up my first KX1 contact with mike on Long
Island, NY.
In fact, this is only my second contact ever. The first was when I was a
Novice back in 1984, facilitated by a ham I met at a
Well, I know for a fact that I'm getting older (39 years).
On Fri, 16 Jul 2004 23:11:07 -0400, Tom Mc [EMAIL PROTECTED]
wrote:
Gauging by these responses (and count me among them), the surveys
indicating
the increase in the average age of hams today is probably correct...hi
Tom
WB2QDG
Is the IRC Elecraft chat channel very active.
I've just connected and there are 7 people connected but little chatting.
Dave.
VK2NA
--
Using Opera's revolutionary e-mail client: http://www.opera.com/m2/
___
Elecraft mailing list
Post to:
Ouch... something bit me on the foot. What the hell is that?
Oh... it's my morse key.
:-)
Dave
VK2NA
On Sun, 18 Jul 2004 23:48:12 -0700, Ron D'Eau Claire
[EMAIL PROTECTED] wrote:
Har!
That was my reaction too! I thought I was reading a message from the
Glowbugs list.
But you know
Wow... the most stunning photographs I've seen in a long time
Thanks Wayne.
Dave
On Sun, 25 Jul 2004 20:52:50 -0700, wayne burdick [EMAIL PROTECTED]
wrote:
Hi All,
SNIP
John is an avid hiker, and embarked this weekend on a challenging trek
into the mountains of Wyoming. He's in
I was wondering if anyone has any experience with the KX1 R30 mod: changing R30
from 22 ohms to 33 ohms. Is there any downside, aside from increased power
consumption on transmit/reduced battery life?
kb3ipe
dt
.
___
Elecraft mailing list
Post to:
If I could only receive down to 3.5MHz I could leave only it hooked up by my
bedside for nighttime SSB/AM listening.
I wonder, would a VLF upconverter convert 3.5 - 4.0 MHz up to 6.5 - 7.0 MHz
with a 3 MHz crystal? I suppose I would just have to change the input filter
from a low-pass to a
--- Dwight [EMAIL PROTECTED] wrote:
Has anyone come up with a speaker to fit in the top section of an EC2?
Thought that if I get a tuner, it would be nice to have a full range speaker
in a matching case to go with my k2.
I have been meaning to ask WA6FWF how this has worked out and what
David G4DMP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
band of operation)
Then on to the SSB Then take a break and on to the K1
That I won at the Orlando Hamcation back in Feb.
73's
David KR4OW
K2# 4320
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Hey what time is the ECN Nets and what Frequencies are
they on? My K2 Should be done by Friday and would like
to participate
Thanks
David KR4OW
K2 #4320
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http
components, and is the
change recommended for the Revision A K2?
Thanks de David G4DMP
In a recent message, Mychael Morohovich [EMAIL PROTECTED]
said
The K2 set that you have, with L25, L26 each consisting of 16 turns, is for
K2 kits that have serial numbers below 3000. Did you buy
1 - 100 of 9323 matches
Mail list logo