Are you using a interface? Such as a Signalink etc.
On Apr 23, 2012 2:31 PM, Steve w8...@comcast.net wrote:
Greetings, I'd like to use Ham Radio Deluxe 5.11
to control and do logging with my
Elecraft K3. I have the KUSB cable from
Elecraft. Is this the only cable I need to have
my
Using K3. I'm using data a for mode. Is that maybe the problem?
On Apr 23, 2012 7:30 PM, Matt Zilmer mzil...@verizon.net wrote:
Are you using PSK31 normal frequencies? You can find these at
http://www.podxs070.com/common-psk31-operating-frequencies.
There is a good explanation about why these
No problem and I decode them fine.
On Apr 23, 2012 8:07 PM, Jim Dunstan jduns...@tbaytel.net wrote:
At 05:30 PM 4/23/2012 -0700, you wrote:
Hi
First thing is to listen in to PSK conversations. I assume you have no
problem hearing PSK signals.
Jim, VE3CI
I find that once I set the my ALC right, 25 watts gave me plenty of power.
I worked Ukraine, Spain, France last night.. saw a station in Israel but he
faded to fast. It was awesome! Thanks for all the help getting my setup
right.
Hope to chat with you all on PSK.
Thanks Gerald - KC6CNN
On May 2,
OK, talked me into it also. How do you point the software to the beta
sight?
On May 21, 2012 10:00 PM, Fred Jensen k6...@foothill.net wrote:
On 5/21/2012 7:48 PM, Wayne Burdick wrote:
Joe Subich, W4TV wrote:
looking forward to the next high performance offering from
Elecraft.
You
Gary, maybe Don will get us some smoked salmon. Had some up there and it
was great.
Don enjoy the family and fishing. Oh pan for some gold too.
On May 22, 2012 9:54 PM, Gary Gregory garyvk...@gmail.com wrote:
*Don,
Enjoy the vacation and I like my Salmon lightly cooked, juicy and tender.
Don
That is for the little 100 watt amp coming for the KX3? Or were you talking
about the kpa500?
On Jun 1, 2012 7:36 PM, Don Wilhelm w3...@embarqmail.com wrote:
The amp most certainly will respond to the RF produced by the K2, but I
am not certain if the TUNE button will do the same as is done
Don That is for the little 100 watt amp coming for the KX3? Or were you
talking about the kpa500?
On Jun 1, 2012 7:40 PM, Gerald Manthey kc6...@gmail.com wrote:
Don
That is for the little 100 watt amp coming for the KX3? Or were you
talking about the kpa500?
On Jun 1, 2012 7:36 PM, Don
Solution - the Dyson blade less fan. Hihi
On Jun 19, 2012 1:41 PM, Tony Estep estept...@gmail.com wrote:
On Tue, Jun 19, 2012 at 1:26 PM, Guy Olinger K2AV olin...@bellsouth.net
wrote:
...I have tried to get after-market fans that were advertised as quiet,
but no luck...
===
Agreed.
I run the Signalink USB to my K3.
In data mode the knobs on the Signalink are around 10 o'clock. I then set
the power to 25 watts on the K3.
Works great. Other modes such as CW the Signalink stays the same and I just
adjust the power on the K3. Compression is always off. The main issue I had
was
Oh PS :
Make sure you have it set for PSK under data mode, it changes for RTTY too.
On Jul 5, 2012 11:08 AM, Gerald Manthey kc6...@gmail.com wrote:
I run the Signalink USB to my K3.
In data mode the knobs on the Signalink are around 10 o'clock. I then set
the power to 25 watts on the K3
I know things have gone up. But I will pay the price for two reasons. 1)
great product and support. 2) made in the USA. And did I mention great
product and support?
Thank you Elecraft!
Gerald- KC6CNN
On Aug 16, 2012 5:44 PM, Robert Vargas (KP4Y) k...@yahoo.com wrote:
I bought a new TS-590 less
Isn't 40 the Max?
I bet it could be given more gain with just a firmware upgrade.
I am somewhat slightly hearing impaired. So I talk quietly. I have a hard
time getting the fifth bar to flicker too.
But I also get good audio reports. Go figure.
73's Gerald
On Aug 22, 2012 9:09 AM, Don Wilhelm
Hello Phillip
Sorry i missed the net. Dr. Appointment.
I had a question. Do we have any members in Alaska?
Thanks
KC6CNN
On Sep 4, 2012 7:26 PM, Phillip Shepard ph...@riousa.com wrote:
Sorry for the delay in getting the report out. It's ben busy here! We had
a
fine net today with good
Mike
How do you like the Acom1000?
I have been looking at them, but all the hams here say don't do it, get an
Alpha. I like the Acom and how easy it is to tune.
What's your take?
On Sep 6, 2012 5:35 PM, Mike n...@nf4l.com wrote:
Hi Mike,
My K3 and the ACOM 1000 are separated by the P3. The K3
Michael
Are you running the latest version of HRD?
It is stable and getting better.
On Sep 18, 2012 11:43 AM, Michael Marx sndtu...@vacuumtubes.com wrote:
I was wondering if anyone is aware of any software for adjusting Config
and regular menu items on the K3? Or is anyone developing any?
] On Behalf Of Gerald Manthey
Sent: Tuesday, September 18, 2012 12:47 PM
To: Michael Marx
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Software
Michael
Are you running the latest version of HRD?
It is stable and getting better.
On Sep 18, 2012 11:43 AM, Michael Marx sndtu
I had the damnest time getting my K2 and usb converter to work. Check all
params baud rates, com port #'s and nothing. Blue screen of death is
usually caused by a wrong chip set. Update drivers make sure you are using
FTDI chip set. This is my advise, but more info needed such as rig, brand
Hi Joe.
I too just tried RTTY. So will watch this thread.
First I have to figure out how to even read RTTY. All looked jumbled.
Hihi.
On Sep 24, 2012 12:01 PM, Joe K2UF j...@k2uf.com wrote:
Just started playing with RTTY. How can I operate split using AFSK A mode?
Any help?
Joe K2UF
Brian
Have you verified in the device manager that the comport settings are
right? Then under advanced settings assign it a comport #. If that is done,
and latest drivers, and in my case making sure the db9 was seated all the
way. It should work.
On Sep 24, 2012 8:02 PM, Brian Hunt
That's great- the Best radio and Best software suite working together.
Makes it better for all of us.
Thanks Eric and Rick.
On Sep 29, 2012 6:53 PM, Rick Ruhl ric...@w4pcsoftware.com wrote:
QSX will be in V 6.0. Eric sent me the K3 and Im fixing a lot of long
term
issues.. QSX works great..
Phillip
What happened to the KPA500?
On Sep 22, 2012 5:39 PM, Phillip Shepard ph...@riousa.com wrote:
The weekly Elecraft SSB net will meet tomorrow (9/23/12) at 1800Z on
14.3035
MHz +/- QRM. I will be the net control from western Oregon. Since my new
KPA500 has failed, and the SB200 has
I'll take it.
On Oct 4, 2012 3:07 PM, Ariel Jacala n...@hotmail.com wrote:
I have a K2 battery holder that is surplus to my needs. If anyone needs
it I can ship to any one CONUS for the price of postage, nothing else.
Please reply off list.
First come, first served.
Ariel
Sent from my
Chris
I run the signalink with my K2. Works great. Psk31 and cw. I am going to
try rtty when radio comes back. Getting kpa100 and kat100 in ec2 case. I
use my hp mini, signalink and K2 off of wind turbine and solar on my
ranch. I really like the SL USB and K2 combo.
On Oct 14, 2012 8:33 PM,
Chip
Any problems running RTTY at full power? PA heat? Or are you running it
half power at 5 watts?
Thanks
KC6CNN- Gerald
On Oct 20, 2012 10:23 AM, Chip Stratton c...@strattonfamily.us wrote:
I'm very impressed with the RTTY mode in this little bugger. It is doing a
good job of decoding
I am so looking forward to getting my fist speed up so that I can send psk
and Rtty with thr key.
On Oct 20, 2012 11:24 AM, Andrew Moore andrew.n...@gmail.com wrote:
I've never been into any mode other than CW, but this morning I tried
RTTY and PSK31 on the KX3 for the first time.
I too was
Hello Rich
Be careful and good luck, been through many of those.
Keep us posted, or set up your radio after it passes. I will monitor the
freq's used for tge elecraft nets.
Good luck and be safe.
On Oct 29, 2012 8:48 AM, rck...@comcast.net wrote:
Greetings,
I'm n New Jersey riding out the
Congradulations Nick
What kind of antenna did you use?
On Nov 7, 2012 6:29 PM, Nick-WA5BDU nick-wa5...@suddenlink.net wrote:
Also had a great time giving my KX3 its first taste of a real contest
in the CW SS. I made 388 Qs operating about 20 hours or so. Missed the
clean sweep by one
Hello Don
There are four settings under the cw mode in Hrd. Cw, and winkey do not
work with the K3 alone. The ky and mcw work good with the K3. Mcw is used
with vox and the tones key the radio. Only down fall is you have to use the
stop in macros or click the stop button. The kycw is for elecraft.
Yes, vox on mcw. Not needed on cwky.
On Nov 11, 2012 4:43 PM, Ian Kahn - Ham km4ik@gmail.com wrote:
Don,
The K3 requires VOX be active to send CW. Please check the K3 user's
manual under CW operations.
73,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
K3 #281, P3
Hello Jay.
Before I got a vertical dipole, I used a 20 meter bazooka up 16 feet. I
worked all kinds of stations and a bunch of DX. I did this running 5 watts
and up to 25 watts. I have a K2, K3, and a KX3. They are great radios. It
goes without saying a better antenna is going to perform well,
Its on the kx3 order page.
On Nov 20, 2012 5:15 PM, David Christ radio...@mchsi.com wrote:
What am I missing? This is not the first time an XG50 has been mentioned.
However I can find no sign of it on the Elecraft web site.
David K0LUM
On Nov 19, 2012, at 8:13 PM, Wayne Burdick wrote:
Al is the K1 still for sale?
On Nov 21, 2012 5:45 PM, VE3GAM ve3...@rogers.com wrote:
KX1, 40, 30 and 20 m covered, no tuner, no paddle
$250 + shipping (shoukd be about $15)
Paypal preferred, email if interested
al ve3gam
__**__**__
Rick
Is there a date for V6 yet?
Can't wait. Hihi
On Nov 26, 2012 10:25 PM, Rick Bates happymooseph...@gmail.com wrote:
So what you're saying is that the N1MM software is the common thread with
the multiple QTH and computer combos?
I presume that it is up to date, along with any OS updates,
Hello Tom
I run the K2 and psk31. It's fun, just remember set your power low. 5 watts
on k2/10 . As far as the mic, I am not sure.
Good luck hope to see you on the waterfall.
KC6CNN
On Nov 27, 2012 5:30 PM, Tom McCulloch th...@att.net wrote:
Hi gang,
I have a very old Rig Blaster interface
Jim, were you able to get it working?
On Dec 5, 2012 9:34 AM, Stan Gibbs s...@ajaxsoftware.com wrote:
Did you cycle power after enabling the ATU?
-
73, Stan - KR7C
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Help-tp7566701p7566713.html
Sent from the
Airmail is one software and RMS express is made by the Winlink group. I use
RMS express with my K3 and my K2 and KX3. It works fine business on Winmor.
Hope that helps.
Thanks
Gerald - KC6CNN
On Jul 5, 2013 9:12 PM, K7JLTextra k7jltex...@gmail.com wrote:
I use RMS express with my K3 KX3, it's
Is The vox on?
On Jul 8, 2013 4:15 PM, Mike K2MK k...@comcast.net wrote:
Hi Mike,
If you hear the tones in the K3 speaker then I assume you mean that you are
hearing them through the monitor. This tells me that the tones are getting
through to the K3 and that you are in transmit (red light).
I use the Signalink USB ,some use their computer sound card while others
use rig blasters and other sound cards. Just remember to get the volume
settings adjusted right and don't over power. I work the world on 25 watts.
Good luck hope to see you on the waterfall.
Gerald - KC6CNN
On Jul 26, 2013
Don
Changing those two caps changes the audio or band width of the signal?
Thanks
Gerald.
On Aug 12, 2013 6:41 PM, Don Wilhelm w3...@embarqmail.com wrote:
Ed,
Change 2 capacitors on the KSB2 board. C34 to 0.47 uF and C32 to
something in the 3300 pF to 5000 pF range.
I usually run SSBC at
The reason I ask is that I get reports of very narrow audio when monitored
by someone with a band scope. They saw between 2 and 2.5 , where most
everyone else runs 3 to 3.5
Thanks
Gerald
On Aug 12, 2013 6:41 PM, Don Wilhelm w3...@embarqmail.com wrote:
Ed,
Change 2 capacitors on the KSB2
Thank you for sharing your findings .
I find on my K2/10 5 watts is good. On K2/100 and K3 25 watts is good. My
KX3 is good at 4 watts , I think it is lower because max power is 10 watts.
73's Gerald
On Sep 19, 2013 1:36 PM, Gerry McGowan m0...@yahoo.com wrote:
Hi,
after carrying out on air
Thank everyone for you suggestions. Here is what I found and did to fix it.
I disassembled my station and then started connecting one thing at a time
until I found the problem.
It turned out that my Signalink USB sound card was what was picking up the
feed back and introducing it back into the K3.
Thank you Wayne.
It was nice to see a tiny little fraction of what you have to deal with.
And also keeps us up to date too.
Keep up the great work.
Gerald - KC6CNN
On Jan 13, 2014 6:41 PM, Wayne Burdick n...@elecraft.com wrote:
Sorry for the bandwidth, guys. Slip of the email alias :)
Now
The solar panned have to go to the charge controller that regulates it to
12 v in my case my solar setup has 12v at 14 amps that os used to charge my
battery bank. I would just hook up to the battery bank and let it charge
from there. Or for field use get a small portable one that rolls up that
I would really like to see a web site with all kinds of macros. This would
help all us newbies.
On Jan 28, 2012 1:26 PM, Rich - K1HTV k1...@comcast.net wrote:
Fred,
Congrats on the very informative K3 book. It's a great reference document
for
all who own a K3. Liked it so much that I
I agree! This is the most helpful reflector around. Don't let one or two
people discourage you from here. Lots of good people and knowledge on here.
On Feb 12, 2012 5:35 PM, David Poplewski dpop...@comcast.net wrote:
I want to take this opportunity to apologize to anyone on the reflector
that
Great advice Matt. I had my first cw contact today. I was nervous but had a
program to translate. I was proud when I was done, but had a patient op.
What I learned was I need to learn the proper abbreviations to use. I find
I want to try more now.
On Mar 13, 2012 6:36 PM, Matt Maguire
How about kio3 for digital.
On Mar 26, 2012 11:44 AM, Dave (K7DRT) dtull...@earthlink.net wrote:
This is my first post.
I sold my IC-756PRO and now plan to buy a K3.
I use mostly SSB (20 40 meter nets), and some digital cw
Here is the initial configuration I have selected: (Kit)
K3/100,
I would prefer the ZS6BKW , it is a improved G5RV. Google it and I think
you will be impressed compared to the G5RV 102.
Just my option.
Gerald- KC6CNN
On Feb 13, 2013 4:14 PM, Paul and Sue Huff ph...@mi.rr.com wrote:
Here in the dead of winter I am thinking about spring antenna projects.
One
Thank you Paul.
I appreciated hearing it first hand. I am glad he and his family are all
okay. Hoping for the best for all those that experienced it.
Thanks
Gerald- KC6CNN
On Feb 18, 2013 11:26 AM, Richard Fjeld rpfj...@embarqmail.com wrote:
Wow, I remember the call UK9AAN well as I have his
My k2, k3 and kx3 do great on digital. I run 5 watt most the time. I have
run 25 watts before. But 5 watts have made many contacts in cw and psk31.
Good luck
Gerald.
On Feb 28, 2013 6:43 PM, Stan AE7UT ae7...@gmail.com wrote:
I have both a K3 and KX3 and was thinking it would be nice to use my
Chris, what mode are you trying and what do you have your power set to?
Also if your RX and TX on the Signalink are maxed, use the Signalink
internal jumper to boast the gain so you can turn them down. Also check the
computer volume both sound and microphone recording. And make sure the
computer
Good. If 9 o'clock and all is good then use Don's suggestion and set alc
and you should be fine.
Good luck.
On Apr 14, 2013 1:40 PM, Chris Kimball m...@cvkimball.com wrote:
Thanks for the comments.
I'm using Olivia/Contestia most of the time rather than MPSK. The possible
splatter is with
Chris.
I have my TX and RX set at 9 o'clock each rig is different I set to low
power and get my signal looking good and then increase my power on the K2
to my 25 watts desired power. On my radio anything over 25 in digital mode
causes distortion. Works fine on CW and SSB. But other digital modes
The key here is a good charge controller. I use a mppt controller and it is
98 % efficient. Gets 30% for charge. Has 3 different charge rates and
handles all battery types.
My RV is also wind turbine and solar powered. I have 560 watt solar to my
mppt charger, then to my 900 amp hr battery bank.
Can the KPA500 handle more than 1000 watts? Say like 1100 to 1500?
On May 1, 2013 9:36 PM, Dick Dievendorff die...@comcast.net wrote:
It's not that critical. Just 11 to 14 volts or so at an ampere max. The
positive is the center of the coaxial DC power connector.
73 de Dick, K6KR
On May 1,
Yea, I meant KAT500. Ok I saw it would do 1000 at 3-1 but was curious about
1500.
Thanks
On May 1, 2013 9:48 PM, Fred Jensen k6...@foothill.net wrote:
On 5/1/2013 7:38 PM, Gerald Manthey wrote:
Can the KPA500 handle more than 1000 watts? Say like 1100 to 1500?
You must mean KAT500, and I
Thank you all. I think I will make a call to elecraft tomorrow. But Mr.
Brown is running legal limit fine. Ok just wanted to ask.
Thanks All
Gerald
On May 2, 2013 12:29 AM, Jim Brown j...@audiosystemsgroup.com wrote:
On 5/1/2013 7:38 PM, Gerald Manthey wrote:
Can the KPA500 handle more than
...@mailman.qth.net] On Behalf Of Fred Jensen
Sent: Wednesday, May 01, 2013 7:49 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT500 power source
On 5/1/2013 7:38 PM, Gerald Manthey wrote:
Can the KPA500 handle more than 1000 watts? Say like 1100 to 1500?
You must mean KAT500, and I don't think
Hello Eric
So the web page saying 1200 to 1500 would not be correct? I would only run
the amp at 1000 anyway, but just making sure before I buy one.
Thanks
Gerald.
On May 2, 2013 2:28 PM, Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com
wrote:
Its important to understand that KAT500 operation
Yes, from key out to relay on the amp.
On May 21, 2013 9:06 PM, Dick Dievendorff die...@comcast.net wrote:
Have you connected the amplifier keying line?
Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Both rca connectors.
On May 21, 2013 9:42 PM, Gerald Manthey kc6...@gmail.com wrote:
Yes, from key out to relay on the amp.
On May 21, 2013 9:06 PM, Dick Dievendorff die...@comcast.net wrote:
Have you connected the amplifier keying line?
Dick, K6KR
-Original Message-
From
on the K3?
73,
Fred/N0AZZ
K3 Ser #'s 6730/5299--KX3 # 2573--K2/100--KAT100
P3/SVGA--KPA500--KAT500--W2
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gerald Manthey
Sent: Tuesday, May 21, 2013 9:43 PM
To: Dick
and, therefore,
no
power out of the Alpha.
This happens on my K3/Al-80B combo.
73...Rick -- W5RH
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gerald Manthey
Sent: Wednesday, May 22, 2013 9:19 AM
To: Fred Smith
Cc: elecraft
I have all those and can confirm the Signalink does not use key out.
Gerald
On May 25, 2013 5:28 PM, K5HM k5hm@gmail.com wrote:
The Signalink USB and the keying line for the linear amp both use the Key
Out port on the K3. Is there a solution that would not require unplugging
the Signalink
You will be very happy with the new radio.
Good luck
73 Gerald KC6CNN
On May 29, 2013 4:34 PM, Richard W Hemingway rhemi...@sbcglobal.net
wrote:
That didn't take long, about one day. I have ordered a K3 factory built
and will get it in a bit.
You have all convinced me it is the thing to do.
Congratulations Bill
You will be pleased with the KX3. Get a good antenna for you situation and
you will find QRP is fun. Then order the amp and tuner later and you will
have a awesome 100 watt radio.
73's Gerald KC6CNN
On Jun 2, 2013 3:30 PM, Bill Blomgren billb...@nc.rr.com wrote:
I ordered a
Are you using an external sound card?
On Jun 11, 2013 7:58 AM, W5JAN w5...@earthlink.net wrote:
To All,
I cannot get HRD (Ham Radio Deluxe) to send CW thru the KX3, but I can send
CW from my keyboard
using the Elecraft Utility. I have gone thru the HRD settings many times
and I have
I second the powerworxs
On Jun 11, 2013 8:28 PM, Anthony Scandurra K4QE k...@att.net wrote:
powerwerx.com model SS-30DV. Quiet, no RF hash, small, and light. I
have had it for just over a year now, and it has been on one DXpedition.
73, Tony K4QE
From:
I agree with you Gary. Here in Texas we add BBQ also.
Who needs an excuse to get out and operate. Have motorhome will travel.
On Jun 23, 2013 8:17 PM, Gary Gregory vk1zzg...@gmail.com wrote:
Gee, you guys almost got it figured out.
Motorhome, beer, k-line, beer, antennas, beer, solar power,
Could one of you cw veterans list all the appropriate prosigns. I am getting
into working cw and it would help.
On Jul 19, 2011 8:55 AM, Grant Youngman n...@tx.rr.com wrote:
While a good bright light (however that is come by) is important, I don't
find the magnifiers on these swing arm lamps
When I chased DX there was no split, we conserved bandwidth. Is there
somewhere to see the split freq? Is it what the op wants? Is it limited to
cw or ssb? Can someone explain it to me, I'm sure their are others wondering
too.
Thanks
On Jul 31, 2011 9:16 AM, Don Wilhelm w3...@embarqmail.com wrote:
I use a Signalink with my K2 and it works good. I also have the fixed audio
going to the Signalink. Get you volume controls set in windows and adjust
the ALC until only one bar lights. Make sure to stay with in the power
limit of the rig. For K2 / 10 I use 4 to 5 watts. For the K2/100 I don't
I run 25 watts on my K3. I adjusted it by watching my peaks on a scope. At
25 watts and my alc set I have a clean signal. There are those that splat
more power and we all see them in the waterfall. 25 watts will work the
world on PSK.
Just my observations and my .02 cents.
73 Gerald
On Feb 22,
I agree with Don! I like to chat, learn about the op or Qth. It is a major
draw back to Jt 65 or Jt9.
On Feb 22, 2014 4:26 PM, Don Wilhelm w3...@embarqmail.com wrote:
Doug,
While low power may have been the recommendation, I started in PSK31 in
2000 when I had only a K2/10. I ran it in the
That was suggested Chester.
It works too. You can kick around numbers and theory all day. Real world is
the best way and you have to remember, temp plays a major part too.
I have lived off grid for two years. My experience has been through trial
and error.
Mind you I don't run just ham equipment,
Congratulations and welcome aboard. There will be many first to come. 1st
QSO , 1st DX many of us have been doing this for years, and still get
excited over different things.
You have chosen a great hobby. And when all else fails you will be
communicating.
Congratulations again Sean
73's KC6CNN
? External
PX3? , waterfall display?
Keyboard?
Just my guesses.
Looking forward to see it.
Gerald - KC6CNN
On Apr 3, 2014 12:50 PM, Wayne Burdick n...@elecraft.com wrote:
Hi all,
We'll be showing a major new product -- a KX3 external accessory -- at the
Visalia DX Convention. You can
Damn! I guessed it. I was the first poster and guessed right. Wish I won
the first one built, but still happy I guessed it.
Wish I was as lucky at lottery.
Gerald - KC6CNN
__
Elecraft mailing list
Home:
If elecraft made a full legal power amp like the Kpa500. I would be all
over it. Right now I use a Alpha 76PA. When I have to, only voice. Every
thing else is around 10 to 25 watts.
Gerald
On May 12, 2014 2:27 PM, Scott Manthe scott.man...@gmail.com wrote:
$6-$7K is a boatload of money, but I
Thank you Bruce.
I have been there went hams sending at 20 + would not slow down and or work
the new novice. I now try to work there a lot to help encourage then.
I wish more would do that too.
73's KC6CNN Gerald
__
Elecraft mailing list
Easy to find your way around in the dark. Thanks for sharing that.
73's Gerald - KC6CNN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Yeah Don
That is what I was just thinking.
This group is a bunch of middle aged business owners who were feed with a
silver spoon. I brought up used equipment and was told they buy only the
best.
Then we all walked out to the parking lot and my Toyota truck was
surrounded by $50,000 trucks. Hihi.
Tony
I have the same setup.
I have not tried Olivia. I have worked all other modes.
What mode is radio set too? Data mode? Is the decode button highlighted
above the waterfall in DM780?
Is band with set properly as not to cut off the signal edges both on the K3
and DM780?
Once your on the signal
Tony
You said you used fldigi or some other software before.
Did you run Olvida? If so then hardware fine its a HRD setting.
Confirm that and I will go check mine in that mode while waiting.
Gerald
__
Elecraft mailing list
Home:
Bill can you give us a little more derails? Such as comouter, software,
soundcard, etc.
Thanks
Gerald - KC6CNN
On Jul 16, 2014 10:58 AM, Bill Davis via Elecraft
elecraft@mailman.qth.net wrote:
Since we are talking about the data modes. W1AW/4 was on 15m PSK31 this
morning. Nice signal here
Just how many people are running high power on low power modes like jt65?
I work the world with 10 watts.
Gerald - KC6CNN
On Jul 19, 2014 10:48 AM, Phil Wheeler w...@socal.rr.com wrote:
Hmm .. makes me wonder if a failed fan would result in an error message
and/or graceful power roll off to
Yes I guess I was not totally informed. I took the suggestions from the
book and translated it to mean low power.
I read the user guide for jt65hf and it said in part Running at full
output power is
seldom necessary or desirable due
to the incredible sensitivity of JT65.
Most users find 5 to 10
John
What size of a generator are you going to use? Also what kind of loads are
you going to be running?
I have experience with all different types, styles, and sizes of generators
because of off grid living. Although mine are now used to only charge the
battery bank in multiple days of bad
I use Tom ' s software. It is stable and controls the elecraft line like no
other. There are a few issues that he has told us about and did say
elecraft was notified and later I recheck and he did not hear back from
them.
This software should be on the elecraft site. It controls the K-Line as
well
Appreciate the heads up Edward. I enjoy checking your site.
Looking forward to it being back up.
73's Gerald - KC6CNN
On Aug 27, 2014 5:54 PM, Edward R Cole kl...@acsalaska.net wrote:
Thanks for the helpful suggestions and several that initially alerted me.
The host is ace.net and they have
Tom
Do I have to have usb's hooked up to all the equipment to get it to show in
the software?
Thanks
Gerald
On Sep 13, 2014 11:09 AM, tom...@videotron.ca wrote:
Win4K3Suite - version 1.662 is now released. This version has a number of
enhancements which follow from user feedback.
New:
- It
Hello Doug
I agree with you. I use Win4k3 as my rig control and HRD log and DM780. It
is stable and works great. It is nice to have my complete K-Line monitored
and controlled by Win4K3.
Tom has done a super job on this software. The Terminal part of it is also
easy to use and a nice feature.
73
for about two minutes and then crashes.. I would LOVE to get it
going but have been unable to..
W4CCS
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Gerald
Manthey
Sent: Friday, October 24, 2014 10:14 AM
To: Doug Ellmore
Cc: elecraft
master.
It runs for about two minutes and then crashes.. I would LOVE to get it
going but have been unable to..
W4CCS
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Gerald
Manthey
Sent: Friday, October 24, 2014 10:14 AM
To: Doug Ellmore
Yes i know. Everyone told me. I had mine in moving box somewhere. My
computer for Internet was also boxed somewhere. All I had was my phone and
was looking for help. I know they are in the manuals. To the ones that sent
just the diagrams thank you all is up and running now. To the others I hope
Hi Mike
Is it a Samsung monitor?
And did you put beads on the power line in too?
Gerald
On Nov 5, 2014 11:33 AM, mike ai...@comcast.net wrote:
When using KPA500 my external monitor (and the P3 display) often freezes,
sometimes up to 5 seconds, after I transmit. With the external display
Mike is the monitor 12 volts from the AC supply. If so try running with DC
and beads.
Gerald
On Nov 5, 2014 1:14 PM, mike ai...@comcast.net wrote:
Not a Samsung, it is a BenQ. But it happened with Dell and ASUS monitors as
well. I just put four beads on the power line as suggested and it seems
Also check monitor refresh rate probably set at 60hz if changeable change
it off 60. The check all menu items on P3 dealing with the SVGA settings.
Gerald
On Nov 5, 2014 1:18 PM, Gerald Manthey kc6...@gmail.com wrote:
Mike is the monitor 12 volts from the AC supply. If so try running with DC
1 - 100 of 129 matches
Mail list logo
