I’m in search for a K3/0 for a buddy. Any available?
73,
Bill WE5P
Comfortably Numb
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
The 2N5235B is .15 cents + postage at Digikey. Better hurry they only have
14,500 left.
73, AK5X-Bill
Sent from my iPhone
> On Mar 30, 2024, at 4:56 PM, W3FPR wrote:
>
> Bruce,
>
> You might try replacing the diode in the N-Gen.
> If that does not work, then look at t
>From what I have read, the coil is usable with an external antenna not the KH1
>antenna.
Bill
K9YEQ
From: elecraft-boun...@mailman.qth.net on
behalf of David Thompson via Elecraft
Sent: Tuesday, March 5, 2024 9:26:58 AM
To: elecraft@mailman.qth.net
S
Good advice
Bill
K9YEQ
From: elecraft-boun...@mailman.qth.net on
behalf of Ken WA8JXM
Sent: Friday, January 12, 2024 5:52:52 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT 500 Loses Match
It's possible that something is arcing and, of course
I would first check all connections. If you are running 500 w then any bad
connection can create your issue, not the amp.
Bill
K9YEQ
From: elecraft-boun...@mailman.qth.net on
behalf of Paul Ecker
Sent: Friday, January 12, 2024 3:30:16 PM
To: Ken Winterling
If you use google mail/gmail, there is a feature called "Show Original"
that you see if you click the three dots in the upper right corner of the
email.
You can also report phishing from that drop-down.
On Tue, Jan 2, 2024 at 6:08 PM jerry wrote:
> The email address means little. Email
It gets worse with all the new gadgets and LED lighting. I just installed new
plant lights, LEDs, and the racket from the wall warts is terrible. I shut
them off when operating, or not interested in lighting up the plants. Terrible
view of the noise on K4 graphic display.
Bill
K9YEQ
You're most welcome!
Bill
K9YEQ
From: elecraft-boun...@mailman.qth.net on
behalf of Pete Smith N4ZR
Sent: Wednesday, November 29, 2023 1:34:40 PM
To: Elecraft List
Subject: Re: [Elecraft] K3 - Erratic receive
Hi Bill - I'm pretty sure my radio is late enough
Pete, have the front panel pins corroded? There is an upgrade available.
Bill
K9YEQ
From: elecraft-boun...@mailman.qth.net on
behalf of Pete Smith N4ZR
Sent: Wednesday, November 29, 2023 1:11:14 PM
To: Elecraft List
Subject: [Elecraft] K3 - Erratic receive
Pete, I ran 1.5kw on 160 with an EFHW and did not have any issues. I ran
feedline underground and had great results. I would suspect some rf feedback.
Which can cause anomalies.
Bill
K9YEQ
From: elecraft-boun...@mailman.qth.net on
behalf of Dick Dievendorff
Wes:
> I remember many years ago an expedition, (forgot who but their leader was
the
> banquet speaker at Visalia the one year I went, and he described this in
his
> talk) They were operating SSB on 14.195 and announcing listening 5 to 10
up.
> But once in a while he would say, "Five to ten
“match” an open antenna line.
Since in that situation, it clicks for a long time before coming to a “match”,
I tend to notice that there is a problem before applying full power.
73 Bill AE6JV
> On Oct 12, 2023, at 23:42, David Gilbert wrote:
>
> I thought I was clear, but a
I'm selling my KAT500 and KPA500. I've hardly used the KPA500,
preferring to operate at 100 watts. It's currently wired for 240 Volts.
Power cords included, but no interconnects. $2000. Buyer pays
shipping. Thanks for looking.
Bill AD6JV
The book is gone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Available: 'The Elecraft K3' Original Edition by Fred Cady. This is the
first edition and it was supplanted by a later edition. I'll sell it
for essentially postage and packing. I think $25 will cover it (CONUS).
Please let me know if interested.
Bill ad6jv
I am new to the site – I hear some antenna designs for portable operation with
the KX3 posted here! I am leaving for Europe, soon and want to take my little
Elecraft with me with some appropriate antennae!
TKS for any help.
Bill, W5SJ
of clutter, but I don’t know how well is
will work with the ambient noise from wind etc. in a POTA/SOTA environment.
73 Bill AE6JV
> On Aug 7, 2023, at 13:30, Eric Fitzgerald wrote:
>
> With the Kenwood MC-60 the PTT was in the base of this desk mic. I like the
> idea of a
. If no current flows through the equipment, it
will not be damaged.
73 Bill AE6JV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
feet from the
house. Pretty much out of "the blue". It was a big one.
Wife and puppies came running to the back door.
Be careful.
73 Bill K3SV
On 7/29/2023 12:18 PM, Gary K9GS wrote:
I've found this lightning tracker app to be pretty accurate.
https://play.google.com/store/apps/
I run fiber from my ISP’s box to my router and then to the switches.
73,
Bill WE5P
Comfortably Numb
> On Jul 28, 2023, at 18:06, Keith Trinity WE6R wrote:
>
> Please, PLEASE disconnect your COMPUTER from your radio(s) if lightning is
> in the area!
>
> Almost ALWAYS ligh
of the nets.
Somehow I ended up net control for the 20M SSB net. I was not able to find any
relay stations, and many regular participants were recovering from field day,
so attendance was “light”. Thanks to everyone who checked in.
AE6JV NH Bill K3 6299
K8NU IL Carl k4d 1228 kpa1500
W4DML TN Doug k3
Team:
Our club has used N1MM for past field days with K3s using DTR RTS settings
in the radio and in N1MM to send CW.
I am trying this with my K3S with a laptop from Field Day, and get errors
whenever i set PTT-KEY to anything but the default. Additionally, some of
these cause steady key down or
The XG50 signal generator is no longer available and I’m in need of a stable
signal to do the extended temperature compensation procedure on my KX3. I
remember a discussion about using the K3’s external converter output but cannot
locate any details.
Any suggestions?
Bill
AF4B
Sent from my
include their
fee in your offer.
Bill
K9YEQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Receiver: 2.8 KHZ, 1.8 KHZ. DVR recorder, 144 MHZ transverter, Diversity.
Asking $4K plus shipping and fees. Prefer Zelle payment. Will do PayPal, etc.
Also, will include Heil microphone, without stand. Please reply off list.
Bill
K9YEQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
LOW VOLTAGE.
Thanks for ideas and assistance.
73 Bill K3SV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Perhaps corrupted firmware. Reload?
Bill
K9YEQ
From: elecraft-boun...@mailman.qth.net on
behalf of j...@kk9a.com
Sent: Saturday, April 22, 2023 7:02:32 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Issue with KPA-1500
Does "FAULT mode immedi
There's lot's of troubleshooting to consider. First: dummy load. Second:
antenna analysis
Bill
K9YEQ
Bill
K9YEQ
From: elecraft-boun...@mailman.qth.net on
behalf of Pete Smith N4ZR
Sent: Saturday, April 22, 2023 8:49:53 AM
To: elecraft@mailman.qth.net
73,
Bill WE5P
Comfortably Numb
> On Apr 14, 2023, at 02:14, Dean L/ K2WW wrote:
>
> So what's the guy talking about putting money up 2 years ago and still not
> receiving his radio?
>
> My offer is still good
>
> 73
> Dean K2WW
>
>> On Thu, Apr 1
Hi Hoop,
Was the ultimate solution to use the windows version of the utility (I assume
so but thought I’d ask to be sure). I’m a new Mac user here and still need to
configure the KPA1500 utility.
73,
Bill WE5P
Comfortably Numb
> On Apr 13, 2023, at 16:30, JK Hooper via Elecraft
>
with demand.
73,
Bill WE5P
Comfortably Numb
> On Apr 11, 2023, at 22:37, Andrew Moore wrote:
>
> Hi Pete - apparently (my guess) demand is high enough that they don't need
> to capture funds right away.
>
> When your radio is nearing the top of the queue (but not necessari
:04 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] PC Connection isuue of K4D
Hi Bill,
Thanks for your ideas. I tried it before and It is showing as a USB HUB
now. I doubt if my setting of USB-PC1 and USB-PC2 were wrong. I will check
them later.
73,
Vincent
the steps again. Beyond
that it would appear you may need someone with more skill. Also, try different
USB cable, Or test the cable you are using to be sure it is ok. Test: use the
cable for some other equipment to attach to the computer.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun
Richard,
The "T" indicates that you have Text Decode turned on.
73,
Bill - NA5DX
On 3/15/2023 6:16 PM, Richard wrote:
On my K3S screen, near the lower right-hand corner there’s a capital T all by
itself.
It only shows up when in CW mode. I can’t find any reference to it in t
Pete,
Here is the link for the KSYN3A synthesizer installation instructions.
See Figure 13 on page 17 for the cable routing for a dual receive K3.
https://ftp.elecraft.com/K3S/Manuals%20Downloads/E740257%20KSYN3A%20Installation%20Rev%20A6.pdf
73,
Bill - NA5DX
On 3/11/2023 4:13 PM, Pete
I have a K3 that was working fine one day and then the next day it would not
transmit or tune. We had no weather and I unplug the antennas and power supply
after each useage.
When I would try to tune I would get - - on screen..
The SERIAL NOMBER IS 3202. ANY INFORMATION YOU CAN CALL ME 504 430
I’ll probably be able to hear you :). I’ll look for you then!
73,
Bill WE5P
Comfortably Numb
> On Jan 20, 2023, at 13:54, Dave Sublette wrote:
>
> Thanks to several of you who gave excellent advice, I now have the N1MM
> keying the K3s. I will be operating the CQ160CW contest
.
There doesn’t seem to be any rhyme or reason to it. It just happens “sometimes”.
Has anyone else observed this? Is there some obscure configuration setting that
is causing this behavior? I couldn’t find one.
Bill Coleman, AA4LR, PP-ASELMail: aa...@mac.com
Quote: "Boot, you transisto
.
There doesn’t seem to be any rhyme or reason to it. It just happens “sometimes”.
Has anyone else observed this? Is there some obscure configuration setting that
is causing this behavior? I couldn’t find one.
Bill Coleman, AA4LR, PP-ASELMail: aa...@mac.com
Quote: "Boot, you transisto
Did you go into the battery menu?
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Skip Kazmarek
Sent: Thursday, January 12, 2023 5:46 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] AMP-HR Display
I finally got my KX2, which is my first-ever
I figured out why it takes so much gain. Somewhere along the line, I switched
sounds cards and I was outputting to the wrong channel. Amazing that I was able
to get any transmit at all.
> On Jan 3, 2023, at 9:55 PM, Bill Coleman via Elecraft
> wrote:
>
> Well, I’ve half-way fi
I just tried it with a brand-spanking new 50ohm BNC terminator. This eliminated
the cable and adapters I needed for my 50 watt dummy load.
Same result.
> On Jan 6, 2023, at 8:42 AM, Chuck Shefflette
> wrote:
>
> Bill,
>
> I've had similar things happen. Try a di
I have two K3s, and both are failing the milliwatt calibration. One fails on
160m, the other on 6m, both with similar error messages.
This is an example of the failure:
Calibrating at 1.900 MHz
IsSamplingComplete: Unexpected response ‘DB 2.08 MW;’ to ‘DB;’.
Calibration power settled at ‘2.08
uma, AZ
>
>
> On 12/30/2022 8:34 AM, Bill Coleman via Elecraft wrote:
>> I own two K3/100 radios. One is SN70xx, another SN87xx. On one of them, I
>> observe an odd behavior with transmit power output.
>>
>> Even though I have an antenna matched to nearly 1:1 V
I'm using the "Elecraft K3 Utility v1.19.9.6".
Clicking on the "Copy New FIles from Elecraft" checks which files I have,
and says "One or more required files from Elecraft Server."
I visited the Elecraft page listing the firmware, and my directory has all
that are shown on the web.
Is there
All bands.
Power calibration was done about 9 months ago.
> On Dec 30, 2022, at 11:19 AM, Joe Subich, W4TV wrote:
>
>
> One band or all bands?
>
> Have you done the power calibration routine recently?
>
> 73,
>
> ... Joe, W4TV
>
> On 2022-12-30 10:34
gt; ... Joe, W4TV
>
> On 2022-12-30 10:34 AM, Bill Coleman via Elecraft wrote:
>> I own two K3/100 radios. One is SN70xx, another SN87xx. On one of them, I
>> observe an odd behavior with transmit power output.
>> Even though I have an antenna matched to nearly 1:1 VSWR
internal options, but many of the configuration
parameters are the same.
Any suggestions?
Bill Coleman, AA4LR, PP-ASELMail: aa...@mac.com
Quote: "We invented personal computing."
-- Bill Gates @ TechNet /
Absolutely agree.
I tested them before they were installed. One positive hint was that they
have a FCC id number.
My under-the-counter lights are an entirely different saga. . ..
On Sun, Nov 27, 2022 at 9:18 AM Mark Newbold wrote:
> Not all FEIT LED's are RFI-free. At the local Red Cross
I have about six of these, two in the garage, and four in the basement next
to the shack. They emit no detectable RF noise.
Oh, and they are the color-changing variety, but i haven't done the color
change on them.
w8lv
On Sat, Nov 26, 2022 at 6:40 PM David Christ wrote:
> I have been buying
Paul, I have one and excellent reports vs Gold line.
Bill
K9YEQ
Have a wonderful day!
Bill
From: elecraft-boun...@mailman.qth.net on
behalf of Paul Van Dyke
Sent: Monday, November 21, 2022 10:34:42 AM
To: Robert Sands
Cc: Elecraft Discussion List
Subject: Re
That is pretty impressive.
When I was first a ham, one of the locals was W7QYA, Flo, a school teacher
not far away. I had managed to crank my speed up to 40 (with some struggle)
but she said that was painfully slow for her. Her nominal speed was 65
wpm. I have yet to get much above 40.
On Thu,
one of my f switches is intermittent... reloading the macro did not
help at all
anyone know the mouser or digikey part number
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
gt;.Slickwire.
> >
> > 72,
> > Rich Hurd / WC3T / DMR: 3142737
> > Grid: FN20is
> > Bureaucracy is always in search of self-preservation. — AA7BQ
> >
> >> On Sep 26, 2022, at 16:56, Bill Lederer w8lv...@gmail.com>> wrote:
> >>
> >&g
I do a similar evaluation of antenna combinations (random wire with/without
9:1) but instead of using different call signs, I move one khz away and
record results that way with RBN.
On Sun, Sep 25, 2022 at 5:19 PM Jim Brown wrote:
> On 9/25/2022 1:43 PM, Bill Mader wrote:
> >
Folks:
I think there was a little note in the KX2 bundle about the type of wire
that is used in the counterpoise wires shipped with the KX2. However, I am
unable to locate it.
I think it had "slick" in its name.
Thanks,
--
--w8lvn--
ers provide
accurate, useful data whereas "I worked..." can be interesting, but not
very useful although it is extremely popular.
73, Bill, K8TE
Date: Sun, 25 Sep 2022 12:19:03 -0700
From: David Gilbert
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] AX-1 -- with and without counterp
OK
Bill
K9YEQ
From: eric norris
Sent: Sunday, September 4, 2022 12:39 PM
To: k9...@live.com; Elecraft Reflector
Subject: RE: [Elecraft] RFE KPA1500 Fan Protocol
Yes, FANticipator works great, but my point is if Elecraft would allow us to
use the 6m fan profile on HF, we wouldn't have to turn
I have used FANticipator for quite a while and I don't find fan noise and
issue. Actually, my supply is too quiet, I oftentimes will forget to turn the
amp off. Ha! Don't ask me my settings I sat and forget several years ago.
Bill
K9YEQ
-Original Message-
From: elecraft-boun
e sure since the colored tops can be easily swapped
> so I don't trust them. The black/ground/shield side usually has a small tab
> or something to identify it as being connected to the coax shield.
>
> *Marshall Harrison, *
> *W4MKH*
>
>
>
>
>
> On Mon, Aug 29, 20
Team:
I have been using a wire out the window from my upstairs office for an
antenna for my kx3. The wire goes to a tree about 30 feet away, so it is
essentially a random wire. I have an additional wire that goes to a ground
rod one floor below.
In doing some experiments with RBN and this
be obvious, the KAT500 is trained on each band and acts
appropriately with V1.75. Why it doesn't with V2.05 is currently a
mystery. It could be a problem with this specific KAT500. I will try
another S/N soon. Lightning is approaching so I shall unplug and
disconnect.
73, Bill Mader, K8TE
ARRL New
who just texted me 22 miles out"). I
unplug and disconnect within 10 miles, if not sooner, even during a
contest. I have not lost a KIO3 in either K3 or had a similar problem with
my other rigs.
73, Bill Mader, K8TE
ARRL New Mexico Section Manager
*ARRL - The national association for Amateur
to V1.75 and it performed as it should.
The question is why does V2.05 appear to ignore what should be memorized
tuning solutions?
73, Bill Mader, K8TE
ARRL New Mexico Section Manager
*ARRL - The national association for Amateur Radio**™*
Secretary/Treasurer and Past President, Albuquerque DX
harmonics. So, the
balun is likely heating up. The 53' antenna is a random wire and needs to have
a proper counterpoise. Random end feds are different birds.
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of David Gilbert
Sent: Friday, July 15, 2022 10
. Note that the manufacturer
specifically says not to hot plug them.
73 Bill AE6JV
> On Jul 12, 2022, at 20:13:32, Jim Brown wrote:
>
> On 7/12/2022 4:44 PM, jerry wrote:
>> I personally do NOT like Anderson PowerPoles; I don't understand what people
>> see in them. One f
ith my friends who use Windows.
73 Bill AE6JV
> On Jul 3, 2022, at 06:59:59, Dave B via Elecraft
> wrote:
>
> I have zero experience of Apple Mac's. But they use a custom version of BSD
> as their OS, that is more like Unix than Linux. So it is likely some if not
> all of the
Team:
Is it possible to take as carryon the KX2 with lithium battery installed?
I know it is not allowed in non-carryon baggage.
--
--w8lvn--
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Great!, I’ve been running with QSK off and zero vox delay ! Thanks Wayne.
73,
Bill WE5P #694
Comfortably Numb
> On Jun 17, 2022, at 17:27, Wayne Burdick wrote:
>
> Beta release R30.B4 is now available for download. This release has several
> bug fixes and one major operat
59 Michigan Good Luck in the Contest
On Tue, Jun 14, 2022 at 12:14 PM KE2WY via Elecraft <
elecraft@mailman.qth.net> wrote:
> test
> --
> Robert G Strickland, PhD ABPH - KE2WY
> rc...@verizon.net.usa
> Syracuse, New York, USA
> __
>
> > Walter Underwood
> > CM87wj
> > http://observer.wunderwood.org/ (my blog)
> >
> >> On Jun 13, 2022, at 7:36 PM, Eric Norris
> wrote:
> >>
> >> How difficult is it to install the later factory heatsink on an early
> KX3?
> &g
Folks:
I have a recently-purchased KX3 that includes the Elecraft-supplied heat
sink.
Is there any opinion of this does an adequate job compared to the ProAudio
one?
Thanks,
--
--w8lvn--
__
Elecraft mailing list
Home:
Amen. It has been a pleasure to check into the net and exchange emails with
Kevin. His nature reports are always welcome
Thanks Kevin - 73 Bill AE6jV
> On Jun 5, 2022, at 22:47:31, Wayne Burdick wrote:
>
> We were reminded by Dave, W8OV, that today marks the 20th an
It’s actually better than that. FT8 only transmits for 12.6 seconds giving a
duty cycle of 42%. The 7.4 seconds left over are used for decode so you can
have an answer to send in the next transmit slot.
73 Bill AE6JV
> On Jun 5, 2022, at 11:18:23, Ken K6MR wrote:
>
> Worst case d
his end. In
addition it works fine k3/0 -> another K3 via RemoreRigs at a different
location but not through the Remotehams link there either. Has anyone come
across this and solved it?
73,
Bill WE5P
Comfortably Numb
__
Elecraft m
. Wayne and Eric:
things need to be tightened up in that area.
Thanks and 73,
Bill WE5P
K4D S/N 694 KPA1500 S/N 763
Comfortably Numb
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
.
The station has been gently used, but since it has a low serial number
(00127) I’m selling the entire package for $1950.00.
If you contact me before the end of Tuesday I can carry it with me to
the Hamvention and deliver it to you there.
Thanks for the bandwidth
Bill AD6JV
Let’s try this again. Sorry about that last post. I have no clue what happened.
I just quoted my original for sale post and reported that the Rig has sold.
thanks and 73,
Bill WE5P
Comfortably Numb
> On May 7, 2022, at 10:04, Bill Weaver wr
I’ve been lax in reporting that the K3S has been sold. Thanks all!
73,
Bill WE5P
Comfortably Numb
> On Apr 25, 2022, at 12:15, Bill Weaver wrote:
>
>
> My K3S S/N 11764 has been replaced with K4 S/N 694 and is for sale. It went
> on the air 3/17/2019 after purchasing new
There are a few of those around now. Of course they have varying capabilities
relative to SMD. A buddy of mine just recently had a K3 repaired by N3CZ over
in North Carolina. He turned it in a few weeks.
73,
Bill WE5P
Comfortably Numb
> On May 1, 2022, at 17:40, Mike Flowers wr
compression just released gets rave reviews.
People like the noise reduction better.
There’s more to a radio than just the RX, although if the RX isn’t good, you
probably should look at another radio. (Or why I don’t use the Icom 706MII in
my car very often.)
73 Bill AE6JV
> On Apr 28, 2
Price drop: $3,500 + shipping.
73,
Bill WE5P
> My K3S S/N 11764 has been replaced with K4 S/N 694 and is for sale. It went
> on the air 3/17/2019 after purchasing new (invoiced on 12/08/2018).
> It includes:
>
> KAT3A Antenna Tuner
> KTCXO3-1 TCXO
> KDVR3 Digital Voi
is of high moral character
but I get paranoid about parts swappers .
Asking $3750 + shipping. Preferred method of payment: via Paypal “pay as a
friend or family”. Cashiers check will also be fine. Contact me at my QRZ email
address.
73,
Bill WE5P
Comfortably Numb
You would have to pry them from my cold dead fingers.
These two radios have provided me with more fun than any other.
And good luck--hope you do find one. I am sure you will enjoy it.
w8lbn
On Thu, Apr 21, 2022 at 2:15 PM Gordon LaPoint
wrote:
> Looking for a used KX2 or KX3, if you have one
what I find interesting is that MANY of our towns/counties and states
continue to purchase MOTOROLA radios, which has support for 6 years.
I may be incorrect , but I am the belief after 6 years your Moto is on
its own, with NO factory support. AND THEY CHARGE A LOT
Sad as many of their
se to a thing of the past. Looking at my Elecraft
"investments", much smaller than many, that is a very hard pill to swallow.
73 Bill K0AWU (Weak signal VHF and above for 63 years)
__
Elecraft mailing list
Home: http://ma
ells ten other people.
Hay Ted, you’re over your quota. HIHI
73 Bill AE6JV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.q
with a
battery operated power supply which allows it to be used with equipment which
was designed for dynamic microphones.
I am definitely not in charge of the product literature for this device, which
came from Yamaha.
73 Bill AE6JV
> On Apr 3, 2022, at 22:47, Jim Brown wrote:
>
> On
Sennheiser
headsets ...
bill ny9h
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
tted on 80 or 160, the phase
noise would cover the entire CW bands. I don't recall what you replaced the
380 with but I was a very happy camper when you did!
I take pride that my KSYN3A-updated K3 is still one of the cleanest CW
signals on the bands.
73, Bill W4Z
will be suppressed by the
output audio bandwidth filter in the transmitter.
73 Bill AE6JV
> On Mar 30, 2022, at 18:30, Bernie and Cheryl wrote:
>
> I'm not really a big FT8 operator, but if you want to work 6 meters, that's
> where the action is. Recently, a local ham sent me an emai
and IF the ORION worked as it should have, out of the gate ... with a
decent GUI ( & working) ,, they might be alive today.
I even drove down to their hamfest to look at the working ORION,,,
which was out from the front demo tent. Someone had plugged in
headphones and the set shutdown,,back
Hi Pete,
Did you confirm that the drive power from the K3 was changing on 15M when you
adjusted it on 80M and vice versa? I’ve never had this problem 160M through 6M.
Sounds like something may be set wrong in the menu or a failure of some sort.
73,
Bill WE5P
Comfortably Numb
> On Mar
ships in the same time frame.
Go figure.
Bill N4LG
You may have missed the two-year long pandemic that, among other
things, has sickened multiple Elecraft employees, caused many to
work from home, and disrupted supply chains, to the extent that
nearly all the major carmakers can't get chips
then there is INDIUM,, which is wired thin metal thermal foil,
some believe the conductivity to be better than the paste
https://www.indium.com/products/thermal-interface-materials/
On 3/29/2022 6:56 PM, David Gilbert wrote:
Thermal pads are a compromise between heat conductivity and
This was a while back - early 2019 with the K3S order. I’m still waiting for
the K4.
73,
Bill WE5P
Comfortably Numb
> On Mar 29, 2022, at 09:05, Bob Schwerdlin wrote:
>
> Wow! At least you got a hat with your radio.
>
> I put down my $1500 deposit on a K4 at the 2019 Hamven
My Elecraft hat cost $5700 but the free radio that came with it was a nice
touch! 藍
73,
Bill WE5P
Comfortably Numb
> On Mar 27, 2022, at 21:07, Rich WC3T wrote:
>
> My wife in cleaning a junk bin this weekend found a “...filthy, dirty hat.
> Can I throw it out?” She b
other K3S as I adjusted the 8 channels. UI
wouldn't use any other mic. I have a spare one just in case.
Bill K4XS/V31XX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I will add that 240 volt wiring frequently uses what we 120v people would think
of as wimpy wire sizes. If you do the math, they give the same wattage as we
get with our #12 or #14 wore at 120v. Or at least that’s what I’ve seen when
I’ve looked at the house wiring in 240v land.
73 Bill AE6JV
1 - 100 of 7013 matches
Mail list logo