Re: [Elecraft] K3 UTILITY QUESTION

Greg, did you set CONFIG:RS232 to USB? Cheers, Alan Alan D. Wilcox, W3DVX (K3S-10457, SKCC 22955) 570-916-9590 (cell, text) https://WilcoxEngineering.com http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments http://amazon.com/author/alandwilcox Williamsport, PA 17701 On 1/11/24

[Elecraft] K3 UTILITY QUESTION

Greg, In CONFIG, make sure that RS232 is set to USB, and that you’re using the USB port on the KIO3B as the proper connection. It’s easy to overlook that change, and the rig won’t talk to the computer without it. Tony W3FLH __

[Elecraft] K3 UTILITY QUESTION

I had previously used my K3 utility program with my K3 that had the standard analog I/O board module.  I recently upgraded to the KIO3B and now my k3 utility no longer functions.  All the functions on the KIO3B work fine.  What is necessary to get the K3 utility running again? I do not need it

[Elecraft] K3 utility

It's been a long time since I used the utility, and seem to be having a brain cramp. I'm unable to figure out how to download my current settings. I have done it before on another computer that died, and can't seem to do it with the new setup. I see where I can upload current firmware, etc but not

Re: [Elecraft] K3 Utility saving macros to PC

elay in getting back to you, I was on an extended trip. 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Steve Zabarnick Sent: Friday, January 21, 2022 07:45 To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Utility saving macros to PC I recently upgrade

[Elecraft] K3 Utility saving macros to PC

I recently upgraded my ham radio computer, which required re-installation of the K3 Utility. Previously, my macros appeared to be saved to the computer, as they would appear in "edit macros" in the "command tester". With this new install, the macros no longer show when starting the utility,

Re: [Elecraft] K3 Utility vs macOS Monterey?

Does the USB port show up when you go to 'About This Mac' and then to 'System Report' and then to 'Hardware:USB' ? Assuming you are using a quality USB cable (from either Elecraft or Sabrent) that uses the FTDI chip set, and not someother cable that uses a Prolific chip set. (I have several

[Elecraft] K3 Utility vs macOS Monterey?

Today was the first time I tried using the K3 Utility since upgrading my MacBook Pro to macOS Monterey v12.1 . The Utility doesn't see the USB ports, only the Bluetooth port. Anyone else having this problem? Time for a K3 Utility update? The last update was in September 2019. 73 Don NA6Z

Re: [Elecraft] K3 Utility

On the website, go to Support/Firmware Pick the K-Line on the list, and then K3S. Scroll down. It’s used for firmware upgrades, configuration save/restore and several other useful things, such as filter assignment by mode, etc. Grant NQ5T > On Jan 24, 2021, at 1:53 PM, NJMike wrote: > >

[Elecraft] K3 Utility

I've seen on the website a couple references to something called "K3 Utility". I can't find anything that actually explains what it is but I think it has something to do with installing firmware upgrades. Thanks, Mike NJ2OM -- Sent from: http://elecraft.365791.n2.nabble.com/

[Elecraft] K3 Utility "Killed" K3, Can't Force Reload?

After a computer configuration change, I needed to figure out which COM port my K3 was coming up on. I ran K3 Utility and started trying COM ports. After several "Port Closed" responses, I tried another and the rig began sending *AA* and other stuff repeatedly. I couldn't stop it with the XMIT

Re: [Elecraft] K3 Utility Restore config error

Thanks for the idea, unfortunately the problem persists. This makes me a bit more nervous than before as I have done quite a bit of upgrading lately (144MHz, Reflock, TCXO) and I had a fault in the tuner (capacitor blown), and now the refclock is off by 220Hz. Did anybody else had the problem

Re: [Elecraft] K3 Utility Restore config error

I’ve gotten that. I just saved again and that one was ok. Then I deleted the error one...but I don’t think the save with the error is necessarily bad. Chuck Jack Hawley KE9UW Sent from my iPhone, cjack > On Jun 19, 2020, at 6:38 PM, "g...@gmx.net" wrote: > > Hello, > anybody encountered

[Elecraft] K3 Utility Restore config error

Hello, anybody encountered a problem restoring a previously saved configuration? The error is "No response to write EEPROM block". tnx 73 Gernot DF5RF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] K3 Utility vs macOS Catalina

Sorry, if someone mentioned this, but the original KUSB uses a Prolific chipset. That’s always been temperamental. Plugable.com have drivers for 10.15.3 but you have to buy them and I haven’t tried them. 73 de David, M0XDF The difference between genius and stupidity is that genius has its

Re: [Elecraft] K3 Utility vs macOS Catalina

Hi Don, I just upgraded to 10.15.4 and launched K3 Utility. It loaded fine, but I noticed that the options under the Configuration and Calibration tabs were grayed out. I switched to the Port tab and selected Test Communications. When I got the positive response back from the K3, the options

Re: [Elecraft] K3 Utility vs macOS Catalina

The Mac Utilities currently on the Elecraft web site are both signed and Notarized. They are ready to go with Catalina. No need to right-click open any longer. A Big thank-you to the program’s author, W4SMT for taking care of this. 73! Jack, W6FB > On Mar 27, 2020, at 8:27 PM, Hisashi T

Re: [Elecraft] K3 Utility vs macOS Catalina

I think it's unsigned and you need to right click and open it (or is it command-click?) and then select "open" and click some dialog boxes. At least that's how it worked for me right now. On Fri, 27 Mar 2020, Grant Youngman wrote: K3 Utility also ?. On Mar 27, 2020, at 9:46 PM, Grant

Re: [Elecraft] K3 Utility vs macOS Catalina

K3 Utility also …. > On Mar 27, 2020, at 9:46 PM, Grant Youngman wrote: > > I just put up Catalina 10.15.4. KX3 and PX3 Utility (latest versions) run > just fine. > > Grant NQ5T > __ Elecraft mailing list Home:

Re: [Elecraft] K3 Utility vs macOS Catalina

I just put up Catalina 10.15.4. KX3 and PX3 Utility (latest versions) run just fine. Grant NQ5T > On Mar 27, 2020, at 8:32 PM, Grant Youngman wrote: > > Never mind. I just got notification for 10.15.4. > > I’ll put it up tonight, and see if the same thing happens. > > Grant NQ5T >

Re: [Elecraft] K3 Utility vs macOS Catalina

; > Grant NQ5T > > >> On Mar 27, 2020, at 7:50 PM, Don Putnick wrote: >> >> I'm using macOS Catalina version 10.15.4 (not .3) >> I'm using the latest version of the K3 Utility downloaded yesterday. Here's >> the system info: >> >> *Elecr

Re: [Elecraft] K3 Utility vs macOS Catalina

; > Grant NQ5T > > >> On Mar 27, 2020, at 7:50 PM, Don Putnick wrote: >> >> I'm using macOS Catalina version 10.15.4 (not .3) >> I'm using the latest version of the K3 Utility downloaded yesterday. Here's >> the system info: >> >> *Elecraft K3 Utili

Re: [Elecraft] K3 Utility vs macOS Catalina

rday. Here's > the system info: > > *Elecraft K3 Utility:* > > > Version: 1.19.9.6 > > Obtained from: Identified Developer > > Last Modified: 9/6/19, 2:15 PM > > Signed by: Developer ID Application: David Fleming (N35N9C572M), > Developer ID Certification Aut

Re: [Elecraft] K3 Utility vs macOS Catalina

That shouldn’t have been needed. The drivers have been built into the macOS since 10.9. David, suggestions? 73, Jack, W6FB > On Mar 27, 2020, at 5:08 PM, Don Putnick wrote: > > That didn't work. BTW when I got the KUSB yesterday I went to the FTDI > website to download the drivers. The VCP

Re: [Elecraft] K3 Utility vs macOS Catalina

That didn't work. BTW when I got the KUSB yesterday I went to the FTDI website to download the drivers. The VCP installer wasn't able to mount, so I loaded the D2XX drivers. They do work with the KPA500 Utility. On Fri, Mar 27, 2020 at 5:04 PM David Fleming wrote: > Hi Don, > > Are you seeing

Re: [Elecraft] K3 Utility vs macOS Catalina

Hi Don, Are you seeing the K3 Utility menu at the top of the screen when you start the app? If so, click Window -> Set To Default Position and see if that helps. If not, we’ll have to try something else. David, W4SMT On Friday, March 27, 2020, 7:05 PM, Don Putnick wrote: Hi all, I'm working

Re: [Elecraft] K3 Utility vs macOS Catalina

Guys; 32 bit apps won’t even launch on Catalina. I suspect that the application’s preferences are corrupt, and have advised him how to find and delete them. 73! Jack, W6FB > On Mar 27, 2020, at 4:38 PM, Grant Youngman wrote: > > The latest versions posted on the website all work fine under

Re: [Elecraft] K3 Utility vs macOS Catalina

I'm using macOS Catalina version 10.15.4 (not .3) I'm using the latest version of the K3 Utility downloaded yesterday. Here's the system info: *Elecraft K3 Utility:* Version: 1.19.9.6 Obtained from: Identified Developer Last Modified: 9/6/19, 2:15 PM Signed by: Developer ID

Re: [Elecraft] K3 Utility vs macOS Catalina

The latest versions posted on the website all work fine under Catalina 10.15.3. If you still have 32 bit apps installed, just upgrade them. Grant NQ5T > On Mar 27, 2020, at 7:22 PM, Walter Underwood wrote: > > Check whether it is a 32 bit app. I just checked my apps and my KXPA and PX3 >

Re: [Elecraft] K3 Utility vs macOS Catalina

Check whether it is a 32 bit app. I just checked my apps and my KXPA and PX3 apps are 32 bit. Catalina requires 64 bit apps. This explains how to check. https://support.apple.com/en-us/HT208436 wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Mar 27, 2020,

Re: [Elecraft] K3 Utility vs macOS Catalina

Don; Which version of the K3 Utility are you using, and which version of Catalina? 73! Jack, W6FB > On Mar 27, 2020, at 4:04 PM, Don Putnick wrote: > > Hi all, > I'm working with Rob at Elecraft on this, but I'm trying to gather more > data for us. When I open the K3 Utility under Catalina,

[Elecraft] K3 Utility vs macOS Catalina

Hi all, I'm working with Rob at Elecraft on this, but I'm trying to gather more data for us. When I open the K3 Utility under Catalina, nothing is displayed. If I go down to the dock, right click on the utility, then select "Show all windows", the utility main screen opens. BUT if I click on the

Re: [Elecraft] Elecraft K3 Utility v1.16.7.25

No, I find the Utility doesn't do that. However, HRD/DM780 and FLDIGI will do that.  Just put the radio in TEST mode and send away. 73 Bob, K4TAX On 3/12/2020 10:47 AM, Tom and Karen Norris wrote: Are there K3s/K3 Utility settings that will allow me to monitor my K3s CW keyer sending in

[Elecraft] Elecraft K3 Utility v1.16.7.25

Are there K3s/K3 Utility settings that will allow me to monitor my K3s CW keyer sending in the K3 Utility Terminal window in addition to monitoring it on the K3s rig display? It seems I've tried every CWT/TEXT DEC setting available but still no luck. I'm just wanting to work on my CW character

[Elecraft] K3 Utility Testers needed

We're about ready to release an update to the Windows version of the K3 Utility. While there are no sweeping changes, there are a lot of little changes, new compiler, help text, fixed-speed capability. Can a few of you help me test it? Please reply directly to me. 73 de Dick, K6KR

Re: [Elecraft] K3 Utility vs. RemoteRig?

a PC at the remote site and then connect via something like TeamViwer. 73 Tom va2fsq.com -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Mitch Wolfson DJ0QN / K7DX Sent: December 17, 2019 11:03 PM To: Rick Tavan ; Elecraft Reflector Subject: Re: [Elecraft] K3 Utility

Re: [Elecraft] K3 Utility vs. RemoteRig?

Sent: December 17, 2019 11:03 PM To: Rick Tavan ; Elecraft Reflector Subject: Re: [Elecraft] K3 Utility vs. RemoteRig? Rick, This is a bug in the K3 Utility that you and I reported to Dick to fix in February 2018. I am not sure where he is in getting this taken care of. 73, Mitch K7DX / DJ0QN

Re: [Elecraft] K3 Utility vs. RemoteRig?

Rick, This is a bug in the K3 Utility that you and I reported to Dick to fix in February 2018. I am not sure where he is in getting this taken care of. 73, Mitch K7DX / DJ0QN -- Mitch Wolfson K7DX / DJ0QN 10285 Boca Cir, Naples, FL 34109 Skype: mitchwo USA: Home:+1-239-221-9600 -

[Elecraft] K3 Utility vs. RemoteRig?

Can someone remind me why K3 Utility can't connect to a remote K3 via a microBit RemoteRig Controller pair even though N1MM and Logger32 connect just fine? /Rick N6XI -- Rick Tavan Truckee and Saratoga, CA __ Elecraft mailing list

Re: [Elecraft] K3 Utility and Win 10

o Win 7. > > > > Ben > > > > Sent from Mail for Windows 10 > > > > From: Don Wilhelm > > Sent: Monday, April 15, 2019 4:16 PM > > To: w4sc; Elecraft@mailman.qth.net > > Subject: Re: [Elecraft] K3 Utility and Win 10 > > > > Are you usi

Re: [Elecraft] K3 Utility and Win 10

Make sure your Registry is clean and no fragments from installs and uninstalls exists.    I use a product called CCleaner, Pro version,  to get rid of junk files and also clean the Registry. That's two different functions.   There is a free version available.    You might be surprised at the

Re: [Elecraft] K3 Utility and Win 10

I run everything on hubs - except for the K3.  And, to make matters worse, updates often upset the computer and a complete reinstall is needed.  Back up, back up, and back more.  Gotta luv Windows 10!!! __ Elecraft mailing list

[Elecraft] K3 Utility and Win 10

"Use a USB port on the computer, not on a hub." Why is this restriction imposed on the K3 utility? The KAT500 and KPA500 utilities work fine through my 10 port hub. Andy, k3wyc __ Elecraft mailing list Home:

Re: [Elecraft] K3 Utility and Win 10

@mailman.qth.net Subject: Re: [Elecraft] K3 Utility and Win 10 Are you using a USB to serial adapter? If so, have you downloaded and installed the latest drivers for that adapter (if the Elecraft KUSB the drivers are from FTDI). Reboot the computer after installation. Use a USB port

Re: [Elecraft] K3 Utility and Win 10

Using FTDI USB from Elecraft, FTDI latest drivers, No HUB, Works with win7, does not work with Win10. Going back to Win 7. Ben Sent from Mail for Windows 10 From: Don Wilhelm Sent: Monday, April 15, 2019 4:16 PM To: w4sc; Elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Utility and Win

Re: [Elecraft] K3 Utility and Win 10

Are you using a USB to serial adapter? If so, have you downloaded and installed the latest drivers for that adapter (if the Elecraft KUSB the drivers are from FTDI). Reboot the computer after installation. Use a USB port on the computer, not on a hub. 73, Don W3FPR On 4/15/2019 3:54 PM,

[Elecraft] K3 Utility and Win 10

Having trouble with Win10 and K3 Utility communicating with K3. Latest K3 utility, and have tried 2 different Win10 machines, all latest updates. Tried lower/higher speeds, no joy. Works FB win7. (tnx again Microsoft!!) Ideas anyone?? Sent from Mail for Windows 10

Re: [Elecraft] K3 Utility Macro Editor

Hello Again, Thanks to all who responded. I found the answer: The "SAVE" button in the K3 Utility Macro Editor writes directly to the Windows Registry. That was the ONE place I hadn't thought to look! BTW: The "Write to K3" button is an entirely different function, not the one I was seeking. 73,

[Elecraft] K3 Utility Macro Editor

G'day, Can someone tell me where the K3 Utility Macro Editor saves its data files? Or what file type is used? I'm using Win 10. The help files don't seem to mention it, and an Internet search came up empty. I find the saved configuration files, and the K3 Frequency / Memory Editor saved data

[Elecraft] K3 Utility COM Port issue

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

Re: [Elecraft] K3 Utility

Solved. I am using a 10 point USB hub and somehow the comm port number changed. Sent from my iPhone > On Mar 8, 2018, at 9:37 AM, Harlan Sherriff via Elecraft > wrote: > > Does the utility save any info in Windows registry? > > I opened the utility to check for

[Elecraft] K3 Utility

Does the utility save any info in Windows registry? I opened the utility to check for firmware. As soon as I opened it, I received the “K3 waiting for firmware load.” message. I was unable to get anywhere using info from the help file, so connected the K3 to another computer and all was

Re: [Elecraft] K3 utility to monitor extended display of characters sent from K3S keyer problem

Hi Tom! Fancy meeting you here! ;-) 73, Carl N8VZ Sent from my iPhone === Carl Jón Denbow, N8VZ 17 Coventry Lane Athens, Ohio 45701-3718 c...@n8vz.com www.n8vz.com EM89wh IRLP 4533 Echolink 116070 PSK and JT65 Forever! === > On Mar 2,

[Elecraft] K3 utility to monitor extended display of characters sent from K3S keyer problem

I'm beginning my learning curve with my new K3S Kit (after a trip to Elecraft for them to correct the 400hz filter I put in backwards! Otherwise it was a good, fun build). I'm wanting to practice CW sending and I am able to see my K3S paddle input characters in the K3S VFO B. But I am not able to

Re: [Elecraft] K3 Utility Not Connecting (Virtual Windows Environmentmay be a factor)

arry (K8UT) -Original Message- From: Rick Tavan Sent: Monday, January 02, 2017 7:04 PM To: Elecraft Reflector Subject: [Elecraft] K3 Utility Not Connecting (Virtual Windows Environmentmay be a factor) Looking for a sounding board here to jump-start my brain. I run Windows 7 under VMw

[Elecraft] K3 Utility Not Connecting (Virtual Windows Environment may be a factor)

Looking for a sounding board here to jump-start my brain. I run Windows 7 under VMware Fusion on a Macbook Pro. Although it's a difficult environment to maintain, most Windows software works well. I run RemoteRig boxes to connect a local K3 acting as a control head to a remote K3. The RemoteRig

Re: [Elecraft] K3 Utility with Windows 10

...!!! 73, Terry, N4TLF -Original Message- From: Bill Johnson Sent: Sunday, December 18, 2016 9:04 PM To: 'Ken Arck' ; 'Rick Braun' ; 'Elecraft' Subject: Re: [Elecraft] K3 Utility with Windows 10 I have a surface pro 3 and surface book and neither have issues to which you refer. 73, Bill

Re: [Elecraft] K3 Utility with Windows 10

ecraft <elecraft@mailman.qth.net> Subject: Re: [Elecraft] K3 Utility with Windows 10 My Surface Pro sucks with driver compatibility issues so perhaps that is your proble. My "ham" computer runs Win 10, 64 bit and no problems at all connecting to the K3s with anything Ken At 03:43 PM

Re: [Elecraft] K3 Utility with Windows 10

; To: "Elecraft" <elecraft@mailman.qth.net> Sent: 12/18/2016 6:43:28 PM Subject: [Elecraft] K3 Utility with Windows 10 I downloaded the latest K3 utility onto my Surface Pro 4 with Windows 10. My K3 is serial 2869, with RS232 to USB adapter cable. I downloaded the driver i

Re: [Elecraft] K3 Utility with Windows 10

The issue with the Prolific chipset (or more accurately, the counterfeit driver issue) is well known and well documented as affecting Win 7 and later At 04:16 PM 12/18/2016, Nr4c wrote: Which KUSB? The older Prolific or the more recent FTDI? Different drivers. Sent from my iPhone ...nr4c.

Re: [Elecraft] K3 Utility with Windows 10

Which KUSB? The older Prolific or the more recent FTDI? Different drivers. Sent from my iPhone ...nr4c. bill > On Dec 18, 2016, at 6:43 PM, Rick Braun wrote: > > I downloaded the latest K3 utility onto my Surface Pro 4 with Windows 10. My > K3 is serial 2869, with RS232

Re: [Elecraft] K3 Utility with Windows 10

My Surface Pro sucks with driver compatibility issues so perhaps that is your proble. My "ham" computer runs Win 10, 64 bit and no problems at all connecting to the K3s with anything Ken At 03:43 PM 12/18/2016, Rick Braun wrote: I downloaded the latest K3 utility onto my Surface Pro 4

Re: [Elecraft] K3 Utility with Windows 10

;elecraft@mailman.qth.net> Subject: [Elecraft] K3 Utility with Windows 10 I downloaded the latest K3 utility onto my Surface Pro 4 with Windows 10.  My K3 is serial 2869, with RS232 to USB adapter cable.  I downloaded the driver indicated on the Elecraft site.  Problem: I cannot, for the life of me, ge

Re: [Elecraft] K3 Utility with Windows 10

Rick, All Windows 10 versions are not created equal. If you have a Win10 full size computer, try it on that. I have not had any problem with Win10 on either my laptop or my desktop computers. On 12/18/2016 6:43 PM, Rick Braun wrote: I downloaded the latest K3 utility onto my Surface Pro 4

[Elecraft] K3 Utility with Windows 10

I downloaded the latest K3 utility onto my Surface Pro 4 with Windows 10. My K3 is serial 2869, with RS232 to USB adapter cable. I downloaded the driver indicated on the Elecraft site. Problem: I cannot, for the life of me, get the radio to connect to the computer. Could this be a 32 bit

Re: [Elecraft] K3 Utility for Mac

There are two aspects in the terminal mode pertaining to CW that need adjustment. There is no auto scrolling for typed text to be transmitted in the bottom panel and the separation bar between received and transmitted text is frozen and can't be moved. I don't use the received text per se but

[Elecraft] K3 Utility for Mac

Any idea of when the K3 Utility for Mac will be updated?   Tom K4AEN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

Re: [Elecraft] K3 Utility question

I use VSPE. My logging program and WSJTX work with it just fine. Yes, Omnirig is also used for WSJTX. http://www.eterlogic.com/Products.VSPE.html Been using it for years. Jim Leder __ Elecraft mailing list Home:

Re: [Elecraft] K3 Utility questions

Gary, I also had a look around for control software - but could find nothing I really liked (There re some great programs out there) - but either too complex or not focused on what I want. So…. Write your own ! I know it sounds daunting - but the K3 has an excellent programming

[Elecraft] K3 Utility questions

I'm starting to explore other options with different software and my K3s. My main interest is in being able to send CW, RTTY and it would be a nice plus to send from the voice memories when calling in a pileup and not have to keep hitting the function button every time I put out my call.

Re: [Elecraft] Elecraft K3 Utility problem

m: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike > Reublin NF4L > Sent: Monday, December 7, 2015 07:06 > To: Kenneth A. Christiansen <w...@i29.net> > Cc: Elecraft List <Elecraft@mailman.qth.net> > Subject: Re: [Elecraft] Elecraft K3 Utility problem

Re: [Elecraft] Elecraft K3 Utility problem

nt: 12/7/2015 6:05:04 AM Subject: [Elecraft] Elecraft K3 Utility problem Hi to the group I was helping a friend get on PSK31 and discovered I have a problem with the Elecraft K3 Utility program revision 1.15.8.18, my K3s sn 10329 and my HP 64 bit laptop running the latest updates of Windows

Re: [Elecraft] Elecraft K3 Utility problem

Subject: Re: [Elecraft] Elecraft K3 Utility problem Ken - I can duplicate your problem on my Win10 Pro setup. Elecraft support is supp...@elecraft.com. 73, Mike NF4L > On Dec 7, 2015, at 9:05 AM, Kenneth Christiansen <w...@i29.net> wrote: > > Hi to the group > > I

[Elecraft] Elecraft K3 Utility problem

Hi to the group I was helping a friend get on PSK31 and discovered I have a problem with the Elecraft K3 Utility program revision 1.15.8.18, my K3s sn 10329 and my HP 64 bit laptop running the latest updates of Windows 10 Home. Everything works OK until I click PSK 31 or RTTY and Options. If i

Re: [Elecraft] Elecraft K3 Utility problem

ered I have a problem with the > Elecraft K3 Utility program revision 1.15.8.18, my K3s sn 10329 and my HP 64 > bit laptop running the latest updates of Windows 10 Home. > > Everything works OK until I click PSK 31 or RTTY and Options. If i put a > number in "Idle timeout millisec

Re: [Elecraft] Elecraft K3 Utility problem

.net] On Behalf Of Mike > Reublin NF4L > Sent: Monday, December 7, 2015 07:06 > To: Kenneth A. Christiansen <w...@i29.net> > Cc: Elecraft List <Elecraft@mailman.qth.net> > Subject: Re: [Elecraft] Elecraft K3 Utility problem > > Ken - > > I can duplicate your p

Re: [Elecraft] Elecraft K3 Utility problem

December 7, 2015 07:06 >> To: Kenneth A. Christiansen <w...@i29.net> >> Cc: Elecraft List <Elecraft@mailman.qth.net> >> Subject: Re: [Elecraft] Elecraft K3 Utility problem >> >> Ken - >> >> I can duplicate your problem on my Win10 Pro se

Re: [Elecraft] Elecraft K3 Utility problem

;> >>> Dick, K6KR >>> >>> >>> -Original Message- >>> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike >>> Reublin NF4L >>> Sent: Monday, December 7, 2015 07:06 >>> To: Kenneth A. Chri

Re: [Elecraft] Elecraft K3 Utility problem

Dick, K6KR >>>> >>>> >>>> -Original Message- >>>> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike >>>> Reublin NF4L >>>> Sent: Monday, December 7, 2015 07:06 >>>> To: Kenneth

[Elecraft] K3 Utility Save Configeration freezes

, K4TAX <https://www.rtsystemsinc.com/> Date: Sat, 12 Sep 2015 07:24:08 -0700 (MST) From: way235 via Elecraft<elecraft@mailman.qth.net> To:elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Utility Save Configeration freezes Message-ID:<1442067848692-7607476.p...@n2.nabble.com>

Re: [Elecraft] K3 Utility Save Configeration freezes

a multi-port serial converter, so we'll see how that works out. 73, Alan. G4GNX -Original Message- From: Bob McGraw - K4TAX Sent: Saturday, September 12, 2015 8:34 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Utility Save Configeration freezes I've found that all RS-232

Re: [Elecraft] K3 Utility Save Configeration freezes

I found that my computer has a serial connector so I ordered a serial cable. The serial cable saves the configuration in a few seconds. I will use the serial cable and not use the serial to USB since it does not work. I really like this K3 Utility and find it very useful. Thanks. Wayne --

Re: [Elecraft] K3 Utility Save Configeration freezes

I am out of town untill Friday. I ordered a 10 foot serial cable and will see how it works. If you works in a few seconds then I will see if I can get the serial to Iusb work. -- View this message in context:

Re: [Elecraft] K3 Utility Save Configeration freezes

G'day, FWIW config save on my Win7/64 box with 38400 bit/sec between it and the K3 takes about 4 seconds beginning to end. Regards, Mike VP8NO On 07/09/2015 00:44, way235 via Elecraft wrote: way235 wrote I am using version 1.15.8.18 with windows 7. The save configuration bar goes to about

Re: [Elecraft] K3 Utility Save Configeration freezes

You might want to look at your computer. It sounds to me like K3Utility has no problem gathering the configuration information, but your computer is having trouble saving the data to the file. 73, Don W3FPR On 9/6/2015 11:44 PM, way235 via Elecraft wrote: way235 wrote The Save Configuration

Re: [Elecraft] K3 Utility Save Configeration freezes

way235 wrote > I am using version 1.15.8.18 with windows 7. The save configuration bar > goes to about 80 percent and then the program freezes and I have to go to > task manager to close the utility. > Configure crystal filters works, Edit CW memories works, Power on banner > and time and date

[Elecraft] K3 Utility Save Configeration freezes

I am using version 1.15.8.18 with windows 7. The save configuration bar goes to about 80 percent and then the program freezes and I have to go to task manager to close the utility. Configure crystal filters works, Edit CW memories works, Power on banner and time and date work. I just can't save

[Elecraft] K3 Utility 1.15.8.18 now available

K3 Utility revision 1.15.8.18 has been placed on our web site, see http://www.elecraft.com/K3/k3_software.htm The new version has several timing adjustments (for K3 and K3S) and commands to react to new K3S capability. It is particularly important for K3S owners to upgrade to this new Utility

Re: [Elecraft] K3 Utility Transmit Calibration Gain failure

calibration? I have tried two different dummy loads on Antenna 1. The K3 automatic tuner gets a 1.0/1 on the dummy load for all bands including 15m, 12m, 10m, and 6m. Thanks in advance, Hoop K9QJS Elecraft K3 Utility for OS X Revision 1.14.10.24 OS X Version 10.10.3 K3 MCU revision 05.14. RS

[Elecraft] K3 Utility Transmit Calibration Gain failure

, Hoop K9QJS Elecraft K3 Utility for OS X Revision 1.14.10.24 OS X Version 10.10.3 K3 MCU revision 05.14. RS-232 speed 38400 bps. Starting 5 watt calibration. Calibrating at 1.900 MHz Calibrating at 3.750 MHz Calibrating at 5.366 MHz Calibrating at 7.150 MHz Calibrating at 10.125 MHz Calibrating

Re: [Elecraft] K3 Utility Transmit Calibration Gain failure

including 15m, 12m, 10m, and 6m. Thanks in advance, Hoop K9QJS Elecraft K3 Utility for OS X Revision 1.14.10.24 OS X Version 10.10.3 K3 MCU revision 05.14. RS-232 speed 38400 bps. Starting 5 watt calibration. Calibrating at 1.900 MHz Calibrating at 3.750 MHz Calibrating at 5.366 MHz Calibrating at 7.150

Re: [Elecraft] K3 Utility Transmit Calibration Gain failure

I did my TX cal with a Mac running OS X 10.10.3 (Yosemite): No problem. Phil W7OX On 5/28/15 5:05 PM, Hisashi T Fujinaka wrote: I had problems as well. I used my work laptop with Windows 8.1 and it worked fine. I think there are issues with Yosemite. On Thu, 28 May 2015, Jim Hooper wrote:

Re: [Elecraft] K3 Utility help in England, please

Subject: [Elecraft] K3 Utility help in England, please Dear UK K3 owners, This email is a request for some help in troubleshooting my recently acquired K3. It is an early model Ser No 104 and has been hardly used. I suspect I am suffering from front panel to RF board pin corrosion problems since

[Elecraft] K3 Utility help in England, please

Dear UK K3 owners, This email is a request for some help in troubleshooting my recently acquired K3. It is an early model Ser No 104 and has been hardly used. I suspect I am suffering from front panel to RF board pin corrosion problems since K3 utility fails to connect and comes up with the

[Elecraft] K3-Utility feature request

I used the K3-utility in parallel to my contest-program. Its terminal is really helpful to read the decoded rtty and cw while it already disappeared out of the display of the K3. My K3 often decodes rtty better than my contest-program. For possible post-contest comparing I want to store the

[Elecraft] (K3) Utility Interface Problem

I need help! I cannot get my computer to communicate with my K3. A week ago, I had no trouble doing this. Now, when I attempted to use the transceiver using either the K3 Utility, revision 1.13,5.9, or TRX-Manager (a CAT program), there is no handshaking. At one time, both of these

Re: [Elecraft] (K3) Utility Interface Problem

Tom. I suspect one of two possibilities. Check ALL RS-232 settings, both on computer and radio. You seem ok w/computer end, chk CONFIG:RS232 for radio settings. Mine says 38,400 b. But you may have an issue with the serial interface chip in the K3. This is not a common occur acne but it

Re: [Elecraft] (K3) Utility Interface Problem

Hi All, After over a week of trying various fixes, Bill, NR4C, may have found the solution to my communications interface problem! I had total forgotten about a severe Thunder storm we has less than a weeks ago! Never thought to couple my problem with nearby lightning strikes! Bill wisely

[Elecraft] K3 Utility Terminal Program

The terminal tab provides a nice CW keyboard, except that I'm not able to maintain it in Transmit mode without keeping the buffer populated. Does anyone know of a way to do that? It would surely make normal QSOs less of a chore. Many thanks, Bob, N2UU

Re: [Elecraft] K3 Utility Terminal Program

Many thanks to all who responded; increasing the timeout did just what I needed. 73, Bob, N2UU -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Robert Weiman Sent: Tuesday, June 10, 2014 11:55 AM To: Elecraft@mailman.qth.net Subject: [Elecraft] K3

  1   2   3   4   5   >