inspector made us
change it to 220 volt two phase. So what is the correct definition.
Brian Harlowe
Thermo V.G. Scientific
Tel +44 (0)1342 327211
Fax +44 (0)1342 315074
-Original Message-
From: rbus...@es.com
Sent: 02 May 2001 21:31
To: emc-p...@majordomo.ieee.org
Subject: AC
I seem to have hit a raw nerve by suggesting that emc test equipment should
be NAMAS calibrated. But surely some cost for calibration should come into
the equation. Surely no professional test engineer would use test equipment
that had not been calibrated at least annually!!!
Brian Harlowe
Another English pennyworth to add to all the other correspondents. You will
need to have the equipment calibrated at least once a year by a NAMAS lab or
similar in order to maintain credibility of your measurements!!!
Brian Harlowe
Thermo V.G. Scientific
Tel +44 (0)1342 327211
Fax +44 (0)1342
Hi Chris
UL are set up here in the UK as UL internationa l(UK) ltd they
can handle things in the same way as in the US. I have just been round the
loop myself and it doesnt come cheap.
If you want details contact me directly
Best regards
Brian Harlowe
Thermo V.G
Brian Harlowe
Thermo V.G. Scientific
Tel +44 (0)1342 327211
Fax +44 (0)1342 315074
-Original Message-
From: Brian O'Connell
Sent: 16 February 2001 17:58
To: emc-p...@ieee.org
Subject: 61326-1
Good people of the group:
Are requirements in IEC61326-1 (EMC for lab
From our experience Oregon is one of the areas in the US where an NRTL mark
is virtually mandatory. Also the levels of inspection are very strict.
I am sure our American friends on the newsgroup will give you details of
some websites
Regards
Brian Harlowe
Thermo V.G. Scientific
Tel +44 (0)1342
this.
May I take this opportunity to wish everyone the compliments of the season
and also reiterate what a useful forum this is and long may it continue
Brian Harlowe
Thermo V.G. Scientific
Tel +44 (0)1342 327211
Fax +44 (0)1342 315074
-Original Message-
From: Courtland Thomas
Sent: 20
Hi Martin
The pass limit on my PAT tester is 3ma at 1.5kV for class 1
items and 3ma at 3kV for class 2 items. Dont know if this helps!!!
Regards
Brian Harlowe
Thermo V.G. Scientific
Tel +44 (0)1342 327211
Fax +44 (0)1342 315074
-Original Message-
From: marti
recharge them. I guess this could lead to customer complaints regarding
battery life.
Brian Harlowe
Thermo V.G. Scientific
Tel +44 (0)1342 327211
Fax +44 (0)1342 315074
-Original Message-
From: m...@cjbdev.demon.co.uk
Sent: 22 November 2000 17:28
To: emc-p...@ieee.org
Subject
of a declaration of competence
As I say I would be interested in the groups comments on this both for
Europe and North America
Brian Harlowe
Thermo V.G. Scientific
Tel +44 (0)1342 327211
Fax +44 (0)1342 315074
---
This message is from the IEEE EMC Society
.
Brian Harlowe
Thermo V.G. Scientific
Tel +44 (0)1342 327211
Fax +44 (0)1342 315074
---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
majord
of such beasts
Many thanks in advance
Brian Harlowe
Brian Harlowe
V.G. Scientific
Tel +44 (0)1342 327211
Fax +44 (0)1342 315074
Received: from ruebert.ieee.org ([199.172.136.3]) by mail.monarch.com with
SMTP
(IMA Internet Exchange 3.14) id 8C60; Tue, 19 Sep 2000 09:23:29
houses have representation out
there and can help.
Not much help I guess but I am sure others on the group will give you
chapter and verse
Regards
Brian Harlowe
-Original Message-
From: John Cronin [SMTP:croni...@hotmail.com]
Sent: 20 May 2000 23:40
To: emc-p...@ieee.org
Subject
that all
future units had the correct colour wire and the drawings for the
particular system carried a note highlighting the difference
Regards
Brian Harlowe
-Original Message-
From: Crane, Lauren [SMTP:lcr...@bev.etn.com]
Sent: 16 May 2000 13:59
To: emc-p...@ieee.org
Subject
.
Just an English tuppence worth
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.org
with the single line
Regards
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.org
with the single line: unsubscribe emc-pstc (without
any one out there quote me any instances or cases that I can use
to drive home the point with our management
A happy Christmas to you fellow compliance people and if we survive
the Y2K business. Good luck in the new century and may this
newsgroup continue to prosper
Best Regards
Brian
to processed goods
Which seems like a catch all to me
Regards
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.org
with material that cannot be
a) recycled
b) Bio degraded
c) Burnt to produce energy ( without giving off toxic fumes)
So a lot of traditional packaging like polystyrene bubble pack etc
will be no use!
Just a couple of uk pennies worth
Brian Harlowe
* opinions expressed here are personal
Re my earlier message.
Apologies for still being in the snail mail dark ages.
BSI have a website at www.bsi.org.uk
or you can email them at i...@bsi.org.uk
Apologies once again
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
Hi Pryor
British Standards here in the UK produce a wallchart with
details of domestic and Industrial voltages around the world.
I don't know if you can obtain this in the US but if you like to e
mail me directly I can give you the address in the UK.
Regards
Brian Harlowe
Signal. but I cant seem to find them now.
Once again any help will be gratefully appreciated.
Regards
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc discussion list.
To cancel your
have some info in an ERA
Safety and EMC newsletter that I will fax to any one if they want it.
Regards
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
* opinions expressed here are personal and in no way reflect the position of VG
and connect up these items to be emc compatible.
Do my responsibilities end there and does the customer have to get
the instrument re tested and CE mark it?
Regards
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message
over the cables to stop them getting to the insulation.
The only other advantage was that apart from the occassional bite the
end effects were not fatal
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming
that are required.
Many Thanks
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.org
with the single line: unsubscribe emc
If you find it will you let me Know
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.org
with the single line
to the organizers and contributors
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.org
with the single line
Hi Everybody
Can some of you Whizzy American Engineers
provide me with some information.
The word on this side of the Atlantic is that if Equipment is not
UL/CSA approved. It MUST be field labelled.
Can anyone confirm this please
Regards
Brian Harlowe
* opinions
regarding section 13.2.1.
I would be interested in the groups reaction as to whether we should
be fitting a pressure relief device to stop the chamber being over
pressurised and blowing out the windows. Or is it just aimed at
things like Electrolytic Capacitors etc.
Brian Harlowe
* opinions
Hi Everybody
Amidst all the recent flurry of activity
regarding the C Tick Mark I thought I saw some mention of compliances
for New Zealand.
If anyone has a record of this could they forward it to me
Many Thanks
Brian Harlowe
* opinions expressed here are personal
it and the panel has the correct warning labels is OK
Just two UK pennies worth
Regards
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord
.
If you want more info a guy called David Eardley at the DTi is the
man, his e.mail is david.eard...@tidv.dti.gov.uk
Regards
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc discussion list
a
briefing on SLIM and stated that in his opinion it would be 4 years
before it might be implemented.
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc discussion list.
To cancel your
Hi Everybody
Can anyone out there point me in the direction of
a standard or code of practice for the marking of removable
interconnecting cables.
I am particularly interested in forms of marking and durability of
labels.
Many Thanks
Brian Harlowe
* opinions expressed
. That the guidelines had been withdrawn for
further revision.
I would be grateful to hear if anyone else has any information on
this
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc
accepted
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
-
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.com
with the single line: unsubscribe emc-pstc (without
Hi everyone
After the response to my question regarding the
differences between CE and FCC for emc.
Can anyone advise me of the UL standard for mains power transformers.
Regards
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Grateful thanks to all who responded to my query reference the above.
I recieved 39 replies which I am now working my way through.
The basic message seems to be you guys in the US have it easy as the
FCC do not require Immunity testing.
Many Thanks
Brian Harlowe
* opinions expressed here
Can someone out there tell a poor Englishman the basic differences
between the requirements of the FCC rules and the requirements to
comply with the EEC emc directive.
i.e. Do you have to do immunity testing and ESD tests to comply with
the FCC rules that sort of thing.
Brian Harlowe
This is a test message please ignore
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
find out.
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
As Andrew said Yup Me too
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
people out there from the correspondence that goes
on.
Many Thanks
Brian Harlowe
* opinions expressed here are personal and in no way reflect the position of VG
Scientific
Hi
I am a new subscriber from the U.K a friend of Chris Dupres.
My question is does anyone have any new/up to date info on the EMC
situation in Taiwan.
Brian Harlowe
Senior Project Engineer
VG Scientific
45 matches
Mail list logo