Hi, Brian-
More margin is good but be sure to check that your leakage/touch current is
still acceptable. Sometimes striking that balance means living with a little
less emissions margin than an EMC guy would prefer. :)
Good luck,
Chet Summers
From: Brian Gregory
Sent: Thursday, August 10,
Dear colleagues-
Can anyone on this list recommend a mobile testing service located in the state
of Nevada, or willing to travel from adjacent state, equipped to test to these
standards?:
*ISO 6393 Earth-moving machinery - Determination of sound power level -
Stationary test conditions
*ISO
Friends,
I'm looking at a commercial product certified to UL 1012 (Standard for Power
Units Other Than Class 2). The product outputs 150 Vdc power and control
signals to small motorized devices via proprietary connections. The downstream
devices can be powered at distances > 50m from the
Hi, Cass—
If your company’s PCB inspection team uses x-ray equipment ask if they will
take a few pictures for you. Dissecting suspect cables is certainly valuable
and often essential, but you can also learn quite a lot about which shielded
cables are “good” or “bad”, not really shielded at
Greetings, all-
I'm looking for the email address and mailing address for Israel's Ministry of
Communications.
Thank you in advance,
Chet Summers
This email and any files transmitted with it from Charles Machine Works are
confidential and intended solely for the use of the individual or entity
Greetings, all-
Is there a general machinery requirement that a service access panel on a mains
powered equipment somehow be permanently attached to the machine (e.g. hinged)
if the panel itself has warning decals affixed to it?
I looked back in the PSES archive for a safety standard reference
Greetings, listmates-
What safety standards should I consider when designing an integrated/built-in,
or otherwise non-user serviceable Li-ion battery in a portable outdoor product?
For a product typically covered by IEC 61010-1 is there a supplementary
standard worth considering for the
Hello, listmates-
How are pulsed d.c. outputs typically stated on the product marking plate? I'm
reviewing a battery operated handheld testing device (IEC 61010-1) that is
capable of outputting low tens of volts "a.c." at 50-60Hz. The device makes
this pseudo-a.c. signal to test another
Greetings, all-
Does anyone here have recent experience using a third party service exporting
to the Kingdom of Saudi Arabia?
Even better, did that experience include export of construction or agricultural
machinery and equipment?
Our recent experience with one of the Big Compliance acronyms
Dear group,
Is it prohibited or frowned upon to combine similar or related regulatory
statements from different government's regulatory agencies into one statement
for efficiency's sake?
For example, "This product complies with Part 15 of FCC Rules & Industry Canada
license-exempt RSS-210,
Greetings, listmates-
I'm evaluating a product system to IEC/EN 61010-1:2010 (3rd edn) and need to
account for Australia & New Zealand NDs. I don't have access to AS
61010-1:2003, which I understand contains Annexes ZA and ZZ for Resistance to
Fire and Australia/NZ variations to IEC
Dear colleagues-
I'm trying to get up to speed quickly with 61010-1, & need some help
interpreting the leakage current limits of IEC 61010-1 and when to apply them.
What is the maximum allowable leakage current per UL-61010-1 for U.S. and
Canada? (the available Digital View UL-61010-1 shows
Hello, Brian—
As Mr. Woodgate recommends, make plans now to find an EU representative (on the
Continent). The latest edition of InCompliance magazine covers the current
three Brexit scenarios. Recent news indicates EU negotiators have dug in and
are not budging, so minimize your uncertainty
[mailto:d...@ieee.org]
Sent: Tuesday, October 16, 2018 3:33 PM
To: Chester Summers
Cc: IEEE EMC PSTC
Subject: Re: [PSES] safety standards--outdoor electric machine
Hi Chet,
I don’t have any opinion as to UL 73, as I am not familiar with that standard,
sorry. I just wanted to be sure
Hi, Doug—
Yes, ASME B20.1 applies and certain aspects of it were included in the initial
risk assessment.
What’s your opinion as far as UL-73 is concerned?
Chet
From: Doug Nix [mailto:d...@ieee.org]
Sent: Tuesday, October 16, 2018 1:38 PM
To: Chester Summers
Cc: IEEE EMC PSTC
Subject: Re
Hello, listmates-
I'm scoping North American electrical safety standards for an a.c. mains
powered, portable conveyor system to support an outdoor construction process.
Used to assist in handling pipe lining fabric at the jobsite. The motor will
likely be no greater than ¾ HP single phase,
Hello, group-
I'm looking for the electrical ratings product marking rules as required by CSA
Standard C22.2 No. 3., ("Electrical features of fuel-burning equipment").
We're finalizing construction on an outdoor machine and need this little piece
of information to complete Canadian marking
Thank you kindly, John and Larry-
I explored ETSI portal as you recommended and found both guidance document and
draft standard. Applying receiver requirements to this system should be
enlightening, to say the least. :)
Chet Summers
From: John Woodgate [mailto:j...@woodjohn.uk]
Sent:
Dear Group,
ETSI EN 302 066-2 v1.2.1 is published in the RED's HS list, with the following
note:
"This harmonised standard does not address requirements relating to receiver
performance parameters and does not confer a presumption of conformity as
regards those parameters."
EN 302 066-2
Dear colleagues,
Does the FCC require labeling on digital controllers used on earth moving
machinery, or is the finished product category exempt? These devices may
control engines or various electric or hydraulic implements, and are 12-24Vdc
powered unintentional radiators that must be
you for the recommendations,
Chet
From: John Woodgate [mailto:j...@woodjohn.uk]
Sent: Friday, March 30, 2018 2:13 PM
To: Chester Summers <csummers@charlesmachine.works>; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] COTS system compliance
Is this a 'one-off' - a unique assemblage, or
Dear experts,
Would a machine training simulator composed (primarily) of COTS video displays,
PC, and VR headset be subject to EN 55032 & EN 55024, or is there another
option? Would the generic standards route make more sense?
The intended user environments are dealer training facilities and
Hello experts,
I'm trying to determine if any compliance requirements apply to Vdc electrical
accessory ports included on a diesel engine powered hydraulic pump. The
machine provides hydraulic power to various specialized earth excavation tools,
connected via umbilical hydraulic and electric
Dear colleagues,
I'm reviewing the user manual for a purchased handheld wireless remote control
transmitter (2.4GHz) and am unclear on the origins of the "radiation exposure
statement" for Canada. What regulatory document does this stem from? Is
placing a user manual reference to Health
- Original Message --
From: Chester Summers
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Sent: July 10, 2017 at 5:49 PM
Subject: [PSES] radio function "locked out" via software...which rules apply?
Dear listmates,
I was asked an interesting question recently t
Dear listmates,
I was asked an interesting question recently that I'm pretty certain has the
standard compliance "it depends" answer:
*Is a radio product with all radio functionality intentionally disabled via
external software load still considered a radio product?
The intent is to repurpose
Mike Sherman
Graco Inc.
Sent from Xfinity Connect Mobile App
-- Original Message --
From: Chester Summers
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Sent: June 9, 2017 at 12:29 PM
Subject: RE: RED ZigBee 6 GHz Immunity Testing: Technical Risk?
Dear group,
did anyon
Thank you very much Larry, Bill and Mike! I really appreciate the timely and
thoughtful replies.
Chet
From: Larry K. Stillings [mailto:la...@complianceworldwide.com]
Sent: Friday, June 9, 2017 12:45 PM
To: Chester Summers <csummers@charlesmachine.works>; EMC-PSTC@LISTSERV.IEEE.ORG
Subje
Dear group,
did anyone ever answer Mike’s question for his ZigBee device? I’ve got the
same question, but I’m using a Bluetooth radio.
Is a completed radio product required by the RED to be tested for radiated
immunity to 6 GHz? In other words, must the finished product match RI
Dear colleagues,
I could use your help determining scope of test standards for a handheld
software service tool, used for checking and updating engine and
hydraulic/electronic system controller software on off-highway earth moving
machinery.
The tool connects to the machine via CAN bus port
Dear group,
I have several questions for those working with video display systems on motor
vehicles, both on and off-road types:
*Is a factory installed backup camera and its supporting dashboard mounted
video display considered "driver convenience equipment" or does the system
serve an
31 matches
Mail list logo