RE: SMPS test according to IEC 60601-1

2007-03-26 Thread emc-p...@ieee.org
-Original Message- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Paolo Peruzzi Sent: Monday, March 26, 2007 3:02 AM To: emc-p...@ieee.org Subject: RE: SMPS test according to IEC 60601-1 Ok ,thank you very much. Again, I was asking for an opinion concerning the expediency

RE: SMPS test according to IEC 60601-1

2007-03-26 Thread emc-p...@ieee.org
that someone's skill in answering my original question is not as good as his arrogance. Paolo Peruzzi From: Brian O'Connell oconne...@tamuracorp.com To: emc-p...@ieee.org Sent: Fri, 23 Mar 2007 09:14:30 -0800 Subject: RE: SMPS test according to IEC 60601-1 60601-1 is explicit about type test

RE: SMPS test according to IEC 60601-1

2007-03-23 Thread emc-p...@ieee.org
23, 2007 1:32 AM To: emc-p...@ieee.org Subject: RE: SMPS test according to IEC 60601-1 Brian, Could you please give me ONE example of a specific requirement on a POWER SUPPLY (not on a single component) in IEC 60601-1? Thanks, Paolo Peruzzi -- Original Message --- From

RE: SMPS test according to IEC 60601-1

2007-03-23 Thread emc-p...@ieee.org
]On Behalf Of Paolo Peruzzi Sent: Thursday, March 22, 2007 7:25 AM To: emc-p...@ieee.org Subject: SMPS test according to IEC 60601-1 Dear group, I would like to gather some opinions about safety tests on switch mode power supplies within medical devices, according to IEC 60601-1. My

RE: SMPS test according to IEC 60601-1

2007-03-23 Thread emc-p...@ieee.org
- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Paolo Peruzzi Sent: Friday, March 23, 2007 1:32 AM To: emc-p...@ieee.org Subject: RE: SMPS test according to IEC 60601-1 Brian, Could you please give me ONE example of a specific requirement on a POWER SUPPLY (not on a single

RE: SMPS test according to IEC 60601-1

2007-03-23 Thread emc-p...@ieee.org
...@safetylink.com] Sent: Friday, March 23, 2007 7:30 AM To: Brian O'Connell Cc: emc-p...@ieee.org Subject: RE: SMPS test according to IEC 60601-1 Hello All, Don't lose sight of the fact that low leakage current limits of electromedical equipment will mandate particular transformer constructions

RE: SMPS test according to IEC 60601-1

2007-03-23 Thread emc-p...@ieee.org
to talk to you about test and construction requirements. luck, Brian -Original Message- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Paolo Peruzzi Sent: Friday, March 23, 2007 8:58 AM To: emc-p...@ieee.org Subject: RE: SMPS test according to IEC 60601-1 Brian, Thank

RE: SMPS test according to IEC 60601-1

2007-03-23 Thread emc-p...@ieee.org
...@ieee.org Sent: Fri, 23 Mar 2007 06:41:12 -0800 Subject: RE: SMPS test according to IEC 60601-1 Mr. Peruzzi, With the exception of certain ECMA safety standards and the IEC safety standard for power supplies (61204), I am not aware of any IEC/harmonized safety standards that contain special

RE: SMPS test according to IEC 60601-1

2007-03-22 Thread emc-p...@ieee.org
22, 2007 7:25 AM To: emc-p...@ieee.org Subject: SMPS test according to IEC 60601-1 Dear group, I would like to gather some opinions about safety tests on switch mode power supplies within medical devices, according to IEC 60601-1. My question arises because a test house technician told me he

SMPS test according to IEC 60601-1

2007-03-22 Thread emc-p...@ieee.org
Dear group, I would like to gather some opinions about safety tests on switch mode power supplies within medical devices, according to IEC 60601-1. My question arises because a test house technician told me he used to test power supplies as they were transformers, for what concerns short