On 12.01.12 17:28, gene heskett wrote:
> Which is the reason I am going out to get another armload of 2 & 1/2" ring
> binders after dinner, I'm going to convert it to dead trees.
Very glad to hear that the eagle has been landed, if not yet fully
tamed. One reminder, there are two manuals, manual_
On Thursday, January 12, 2012 07:06:11 PM Ed Nisley did opine:
> On Thu, 2012-01-12 at 17:28 -0500, gene heskett wrote:
> > get another armload of 2 & 1/2" ring binders
>
> If you can stand to wait for a bit, I'll run off a booklet-sized version
> and send it to you. The printer uses bulk ink, I'
On Thu, 2012-01-12 at 17:28 -0500, gene heskett wrote:
> get another armload of 2 & 1/2" ring binders
If you can stand to wait for a bit, I'll run off a booklet-sized version
and send it to you. The printer uses bulk ink, I've finally got the
restack orientation down to a reflex, and I have a com
Any Emails from me should not be opened dated prior to this email.
I have been infected by an email that is sending out to all in my address book.
Sorry if this has caused any inconvenience.
Will Baden
--
http://tangohop.com/mt/likeit.php?before126.php";>http://tangohop.com/mt/likeit.php?before126.php
--
RSA(R) Conference 2012
Mar 27 - Feb 2
Save $400 by Jan. 27
Register now!
http:/
On Thu, 2012-01-12 at 21:49 +0200, Viesturs Lācis wrote:
> 2012/1/12 andy pugh :
> > On 12 January 2012 18:14, Viesturs Lācis wrote:
... snip
In case it might be useful, here is a link to other bridge driver
information:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Bridges_-_Half,_Full,_Three_Phas
On Thursday, January 12, 2012 05:29:04 PM robert did opine:
> i have seen my work offset disapear also and its more todo with machine
> being shutdown/turned off with out it doing a full shutdown, iv not dug
> deep into it but it seems EMC does not close the file or something if
> you dont allow a
On Thursday, January 12, 2012 05:22:02 PM Fox Mulder did opine:
> Am 12.01.2012 19:38, schrieb Kirk Wallace:
> > On Thu, 2012-01-12 at 12:55 -0500, gene heskett wrote:
> >> On Thursday, January 12, 2012 12:43:08 PM andy pugh did opine:
> >>> On 12 January 2012 07:22, gene heskett wrote:
> >> [...
i have seen my work offset disapear also and its more todo with machine
being shutdown/turned off with out it doing a full shutdown, iv not dug
deep into it but it seems EMC does not close the file or something if
you dont allow a shutdown it gets reset in some way.
rob
On 12/01/2012 10:11, ya
Am 12.01.2012 19:38, schrieb Kirk Wallace:
> On Thu, 2012-01-12 at 12:55 -0500, gene heskett wrote:
>> On Thursday, January 12, 2012 12:43:08 PM andy pugh did opine:
>>
>>> On 12 January 2012 07:22, gene heskett wrote:
>> [...]
>>> Have you tried DesignSpark under Wine?
>>> Though gEDA might be a
On 12 January 2012 19:36, wrote:
> Like you I tried several circuit board design tools and settled on gEDA suite
> Easy to learn, very configurable, and lots of symbols at www.gedasymbols.org
I am just looking at it now. It has the _huge_ advantage of running
natively on my Mac, and I think tha
On Thursday, January 12, 2012 03:53:27 PM kqt4a...@gmail.com did opine:
> On Thu, 12 Jan 2012, Kirk Wallace wrote:
> > On Thu, 2012-01-12 at 12:55 -0500, gene heskett wrote:
> >> On Thursday, January 12, 2012 12:43:08 PM andy pugh did opine:
> >>> On 12 January 2012 07:22, gene heskett wrote:
> >
On Thursday, January 12, 2012 03:48:50 PM Kirk Wallace did opine:
> On Thu, 2012-01-12 at 12:55 -0500, gene heskett wrote:
> > On Thursday, January 12, 2012 12:43:08 PM andy pugh did opine:
> > > On 12 January 2012 07:22, gene heskett wrote:
> > [...]
> >
> > > Have you tried DesignSpark under W
On Thursday, January 12, 2012 03:23:23 PM andy pugh did opine:
> On 12 January 2012 17:55, gene heskett wrote:
> > That still needs the chemistry. Lets just say that disposing of about
> > 3 gallons of well spent ferric chloride, diluted with at least 1000
> > gallons of water, was sufficient to
2012/1/12 Peter C. Wallace :
> On Thu, 12 Jan 2012, Viesturs L?cis wrote:
>
>> Date: Thu, 12 Jan 2012 21:49:16 +0200
>>
>> From: "[UTF-8] Viesturs L?cis"
>> Reply-To: "Enhanced Machine Controller (EMC)"
>>
>> To: "Enhanced Machine Controller (EMC)"
>> Subject: Re: [Emc-users] Servo drive?
>>
On Thu, 12 Jan 2012, Viesturs L?cis wrote:
Date: Thu, 12 Jan 2012 21:49:16 +0200
From: "[UTF-8] Viesturs L?cis"
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Servo drive?
2012/1/12 andy pugh :
On 12 January 2012 18:14, Vies
2012/1/12 andy pugh :
> On 12 January 2012 18:14, Viesturs Lācis wrote:
>
>>> I was meaning a 12 to 12 (or 12 to 15) one, like
>>> http://uk.rs-online.com/web/p/dc-dc-converters/6727408/
>>>
>>> That gives the IRAMS board an isolated 15V supply,
>>
>> Thanks for the link!
>
> I have a feeling that
On Thu, 12 Jan 2012, Kirk Wallace wrote:
> On Thu, 2012-01-12 at 12:55 -0500, gene heskett wrote:
>> On Thursday, January 12, 2012 12:43:08 PM andy pugh did opine:
>>
>>> On 12 January 2012 07:22, gene heskett wrote:
>> [...]
>>> Have you tried DesignSpark under Wine?
>>> Though gEDA might be a b
On 12 January 2012 18:14, Viesturs Lācis wrote:
>> I was meaning a 12 to 12 (or 12 to 15) one, like
>> http://uk.rs-online.com/web/p/dc-dc-converters/6727408/
>>
>> That gives the IRAMS board an isolated 15V supply,
>
> Thanks for the link!
I have a feeling that that might not have a large enoug
On Thu, 2012-01-12 at 12:55 -0500, gene heskett wrote:
> On Thursday, January 12, 2012 12:43:08 PM andy pugh did opine:
>
> > On 12 January 2012 07:22, gene heskett wrote:
> [...]
> > Have you tried DesignSpark under Wine?
> > Though gEDA might be a better bet, being native Linux. (I have never
On 12 January 2012 17:55, gene heskett wrote:
> That still needs the chemistry. Lets just say that disposing of about 3
> gallons of well spent ferric chloride, diluted with at least 1000 gallons
> of water, was sufficient to put a new medium sized cities sewage plant that
> had just been brough
2012/1/12 andy pugh :
> On 12 January 2012 15:43, Viesturs Lācis wrote:
>
>>> On reflection, it might be wise to use a DC/DC convertor for Vdd,
>
>> And how much would such a convertor cost? I would need to convert
>> 330VDC to 12VDC.
>
> I was meaning a 12 to 12 (or 12 to 15) one, like
> http://u
On Thursday, January 12, 2012 01:04:12 PM Kent A. Reed did opine:
> On 1/11/2012 7:35 PM, gene heskett wrote:
> > On Wednesday, January 11, 2012 07:01:30 PM Kirk Wallace did opine:
> >> On Wed, 2012-01-11 at 14:30 -0500, gene heskett wrote:
> >> ... snip
> >>
> >>>So
> >>>
> >>> the question
On Thursday, January 12, 2012 12:58:26 PM Kent A. Reed did opine:
> On 1/12/2012 2:22 AM, gene heskett wrote:
> > <...>
> > But, now there is a new CadSoft Eagle problem for all of us that
> > renders the whole project moot.
> >
> > Apparently my freebie copy of eagle has timed out, the screen it
On Thu, 2012-01-12 at 12:40 -0500, gene heskett wrote:
... snip
> The screen is 100% brightness, and all the text in the pulldown menu's is
> bleached out and illegible. Essentially useless when the edit screen is
> opened and all I can see is the background screen showing through.
... snip
Spe
On Thursday, January 12, 2012 12:43:08 PM andy pugh did opine:
> On 12 January 2012 07:22, gene heskett wrote:
[...]
> Have you tried DesignSpark under Wine?
> Though gEDA might be a better bet, being native Linux. (I have never
> tried it)
I have looked at gEDA and it shows promise, but it ne
On Thursday, January 12, 2012 11:26:45 AM Erik Christiansen did opine:
> On 12.01.12 02:22, gene heskett wrote:
> > But, now there is a new CadSoft Eagle problem for all of us that
> > renders the whole project moot.
> >
> > Apparently my freebie copy of eagle has timed out, the screen it opens
>
On 12 January 2012 15:43, Viesturs Lācis wrote:
>> On reflection, it might be wise to use a DC/DC convertor for Vdd,
> And how much would such a convertor cost? I would need to convert
> 330VDC to 12VDC.
I was meaning a 12 to 12 (or 12 to 15) one, like
http://uk.rs-online.com/web/p/dc-dc-conver
On Thu, 2012-01-12 at 13:49 +0200, Viesturs Lācis wrote:
... snip
> How big was that motor? Should something be differently with AC servo
> motor? I am not sure anymore that I do understand, what is inside AC
> servo motor. Normal DC brushless motors have permanent magnets, but I
> have difficultie
On Thu, 12 Jan 2012, Viesturs L?cis wrote:
> Date: Thu, 12 Jan 2012 17:43:21 +0200
> From: "[UTF-8] Viesturs L?cis"
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Servo drive?
>
> 2012/1/12 andy pugh :
>> On 12 January
On Thu, Jan 12, 2012 at 2:22 AM, gene heskett wrote:
>
> -rw-r--r-- 1 gene gene 4656 2012-01-11 16:23 emit_gcode.c
> -rw-r--r-- 1 gene gene 291 2012-01-11 16:29 Makefile
> -rw-r--r-- 1 gene gene 24585 2012-01-11 16:23 plt2g.c
> -rw-r--r-- 1 gene gene 1407 2012-01-11 16:23 plt2g.h
> -rw-r--r--
On Thu, Jan 12, 2012 at 10:32 AM, andy pugh wrote:
>
> On reflection, it might be wise to use a DC/DC convertor for Vdd, so
> that it has a floating, isolated logic power, that can be safely
> referenced to PSU gnd.
>
This is what I did. I had trouble getting the IRAMS to fire without tying
logi
On 01/11/2012 08:39 AM, Chris Radek wrote:
> On Wed, Jan 11, 2012 at 08:19:33AM -0800, Karl Cunningham wrote:
>>
>> Hi Chris. Thanks for the reply. Below is what I get. This is on a
>> simulator. EMC v2.4.6 is what's reported on the splash screen. I'm not
>> sure where to find the touchy version; m
2012/1/12 andy pugh :
> On 12 January 2012 15:27, andy pugh wrote:
>>> Is it supposed to receive any additional 5V, 12V or something similar
>>> for logic power?
>>
>> Yes, Vdd.
>
> On reflection, it might be wise to use a DC/DC convertor for Vdd, so
> that it has a floating, isolated logic power,
On 12 January 2012 15:27, andy pugh wrote:
>> Is it supposed to receive any additional 5V, 12V or something similar
>> for logic power?
>
> Yes, Vdd.
On reflection, it might be wise to use a DC/DC convertor for Vdd, so
that it has a floating, isolated logic power, that can be safely
referenced to
On 1/11/2012 7:35 PM, gene heskett wrote:
> On Wednesday, January 11, 2012 07:01:30 PM Kirk Wallace did opine:
>
>> On Wed, 2012-01-11 at 14:30 -0500, gene heskett wrote:
>> ... snip
>>
>>>So
>>>
>>> the question then is what kind of wax? Paraffin would soften a bit
>>> fast come summer heat I
On 12 January 2012 15:02, Viesturs Lācis wrote:
> How do I determine, what size capacitors should be used?
> Right on the rectifier and also for those boot-strap capacitors?
On the basis of maximum current draw and allowable ripple. And
capacitor ESR too.
> What is that on the upper right corne
On 1/12/2012 2:22 AM, gene heskett wrote:
> <...>
> But, now there is a new CadSoft Eagle problem for all of us that renders
> the whole project moot.
>
> Apparently my freebie copy of eagle has timed out, the screen it opens
> is about 75% transparent and extremely bleached out, rendering it unusa
2012/1/12 andy pugh :
> On 12 January 2012 11:49, Viesturs Lācis wrote:
>
>> How big was that motor?
>
> It was a 2HP motor. On reflection, I probably drained the capacitor
> and then bad things happened.
How do I determine, what size capacitors should be used?
Right on the rectifier and also for
On 12 January 2012 11:49, Viesturs Lācis wrote:
> Ok, I think that I finally got it - the heatsink is under the board
> and only its very black side can be seen...
Yes, that was the main change.
> How big was that motor?
It was a 2HP motor. On reflection, I probably drained the capacitor
and t
2012/1/11 andy pugh :
> On 11 January 2012 11:58, Viesturs Lācis wrote:
>
>> http://docs-europe.electrocomponents.com/webdocs/0dca/0900766b80dca34c.pdf
>
>> On page nr 9 I found a scheme of "Typical application connection".
>> Do I understand correctly that anything within the blue frame already
>
On 12 January 2012 07:22, gene heskett wrote:
> Apparently my freebie copy of eagle has timed out, the screen it opens
> is about 75% transparent and extremely bleached out, rendering it unusable.
Have you tried DesignSpark under Wine?
Though gEDA might be a better bet, being native Linux. (I ha
hello all
on the gluiing machine, this morning, surprise : my employee was unable
to start work, with a "linear move at line 24 will exeed joint 1
capabilities" error that left him quite puzzled. It took me some time to
understand what happened : all values in the emc.var file where reseted
to
On 12.01.12 02:22, gene heskett wrote:
> But, now there is a new CadSoft Eagle problem for all of us that renders
> the whole project moot.
>
> Apparently my freebie copy of eagle has timed out, the screen it opens
> is about 75% transparent and extremely bleached out, rendering it unusable.
Gen
44 matches
Mail list logo
