so if you wish to donate the basics feel free
depends what you wish to do with the returned results also
robert
--
Come build with us! The BlackBerry® Developer Conference in SF, CA
is the only developer event you
Hi all
I Spoke with Archivist earlier today on IRC and we talked about having a
UK meet, we thought about having a social meet and greet.
we have the Midlands Model Engineering Exhibition coming up on the 16th
to 20th October which could serve as a good place to meet.
website info here
http://w
> They all use F. However, If you do know otherwise
try a Siemens 810T post now that has some very fun cycles to program
lots and lots of RXX=
and B for radius in turning no R
thank god devs didt take any of them two ideas and use on EMCs interpretior
the same with its stock removal R28 definds
> No can do :( - complete file is subject to a privacy agreement. There is
> nothing wrong with it, as I said it stops randomly on G1 lines.
>
> I eventually did the job by putting an F word on every G1 line.
>
then why not make a program with same issue if u can repeat it it would
be a bug
> I'm finding it impossible to produce a turn post processor because of
> this. I can get my CAM to put the K in, but it also puts the F in too!
>
hmm i wouldt have exspected this to give much of a problem, ok fanuc do
it with
G76 *_X_* Z R P Q F
but many other controls do use many diff variab
Rondal Nannie wrote:
> I do not know about that, I only removed the % sign on the end of the proram.
> Thanks for the response. Ron
>
> --- On Mon, 8/17/09, Ray Henry wrote:
>
> Is it possible that this is another case of editing a text file on
> another OS or editor that uses a different end of
hi ron
most files i open are just .txt files and emc reads them fine might be
something screwy in the txt file its not liking but not letting u know why.
i just saw there is a % at the end of the file try and remove it and see
what happens. let us know if it fixes it, or not
what version of EMC
Hi ron
im guessing you got it loaded if u can run single lines of code at a time.
if not just copy all the content alex linked to, save it into a blank
txt file
then do file,open, locate the new file (may have to change from *.ngc to
*. all files in open window its at bottom of window)
if the p
> Press feedhold -> Jog... then do whatever you want, then Mem -> Start ->
> Start
>
>
here we go
http://www.fanuc.co.jp/en/product/new_product/2007/0702/0701_programrestart.html
now i believe you still have to restart spindle, coolant on etc if u
stop them. especially if u press reset which
HI dale
thanks for sending over the PDF iv given it a read over, nice work so
fare. where is this article going? in a mag or the likes? just
interested realy
o, on the image to Gcode, the word your looking for is gray scale in
black white image for depth perception i believe.
Did you think ab
> Well - I'd love to see a Fanuc 16/18/21 do as you ask.
>
the philips control on our DSG has a crude form of it
if you do a run from line. it will run through the program doing no
moves setting its self up checks if tool is in right turret location
loads up spindle speed & gear range
loads th
> Hi Rob, the only selling point you have is cost if it's in a commercial
> environment.
>
not so true in all respect, you have alot of control if you know the in
and outs of EMC.
EMC u can customize up using HAL to pretty much any setup you care for.
if thats enough you can wire your own mo
What about this page?
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?PWM_Servo_Amplifiers
here is my mill i retro fitted from a Mitsubishi M0 control to EMC
http://www.linuxcnc.org/component/option,com_kunena/Itemid,20/func,view/catid,30/id,559/lang,en/
the next retrofit is two Hardinge Superslants
hi
when we click finish get the below error, we did put a name in machine
name box.
system is 2.3.2
running wizard from shortcut.
stepconf encountered an error. The following information may be useful
in troubleshooting: Traceback (most recent call last): File
"/usr/bin/stepconf", line 1817, i
Hi Niels
what kind of changer is this?
you will need to use PLC or maybe even a HAL component to track the
tools etc just like you would for a normal tool changer.
when EMC wants to change tool it output a signal to do so, and waits for
a finish signal to come back from what ever controls the c
Leslie Newell wrote:
> I have finally got to the point on my lathe where I can start tuning.
> The setup is:
> Mesa 5i20 driving a 7i29 with 1024CPR encoders on the screws. The PWM
> gain is set so the velocity is roughly equal to the commanded input. For
> example a PID output of 60 will give a
the problem monitor the step & direction outputs this will let you see
what EMC i sending out,
this will let you narrow down where problem is, if the stepper board is
missing the direction out put signal or for some reason EMC did not
output then you can take it from there.
is this st
Shabbir Hussain wrote:
> Dear All,
>
> I want to purchase 7i43-U-4-ROHS ans 7i33 from Mesanet. They quoted the price
> but in order to pay from credit card they are asking to fax them the
> photocopy from front and back of my credit card.
>
> My question is :
>
> 1. Have anyone purchased these ca
robert wrote:
> here is a copy of my hm2 if its of any help
>
> http://pastebin.com/m45f33c07
>
>
>> I am now struggling with my +/-10 V to my VFD
>> I turn on my spindle which should give me 1 rpm but the spindle
>> goes full bore.
>>
>
robert wrote:
> here a peak at my ini file
>
> http://pastebin.ca/1447603
>
>
>
>
> Terry wrote:
>> That looks just like my Hurco VMC 20 just a different color
>>
>> My motors are AC (red caps) so putting on encoders is out,as
>> I dont think I
robert wrote:
> Hi terry im glad i could help in some ways
> Terry wrote:
>> That was great help I had one line that I couldnt figure out how to
>> get converted
>> from mi520:
>>
>> setp m5i20.0.dac-03-gain [AXIS_3]OUTPUT_SCALE
>>
>> I think you
everything is working just like hm4
> so it really doesnt matter,but still.
> You must think Im crazy by now.
>
>
> Thanks again
>
> Terry
>
>
>
>
>
>
> On Thu Jun 4 13:30 , robert sent:
>
>
>> here a peak at my ini file
>>
>&
Hi terry
i too am now using the HM2 setup and find i only need very small values
on the tunning to get a some what stable system 0.2xx or so ( i have not
finished tuning yet)
find it odd how other people use very large values dont know if this is
a HM2 or what. maybe some one who knows can poin
Peter wrote:
Message: 4
Date: Thu, 21 May 2009 08:31:02 +0200
From: P?ter Bocska
Subject: Re: [Emc-users] [Fwd: Heiz CNC - emc configuration] 5th axis
To: "Enhanced Machine Controller (EMC)"
Hello Robert,
Have you ever thought about making the 5
Peter blodow wrote:
> As far as I could
> see there was no position feedback. Still this mechanism never failed or
> went to a wrong position. If someone knew how this works, wouldn't it be an
> alternative for a tool carousel?
>
> Best regards
> Peter Blodow
>
>
yes, in the past 10 or so yea
override limits etc like on some commercial CNCs
i think first you need to evaluate the type of changer your setup
demands and take it from there
robert
> --
> The NEW KODAK i700 Series Scanners deliver under A
Kirk Wallace wrote:
> On Sun, 2009-05-03 at 07:04 -0500, Ray Henry wrote:
>
>> On Sun, 2009-05-03 at 09:56 +0100, robert wrote:
>>
>>> this is a shame if emc does not store current tool into a paramiter
>>> looks like i need to keep a perm record in
>
> M61 Qxx is there to allow you specify the currently loaded tool.
> If you shutdown emc2, and restart it will not remember the tool number it
> last had loaded, so one can use the M61 to specify the current number.
> This only works in MDI though, I don't think it's usefull to specify it from
Chris Morley wrote:
>
>> i am just implementing the tool changer and i would like to know when
>> setting the current tool with
>> M61 Q02
>> this should set current tool in spindle to T02
>> will this also set the iocontrol.0.tool-number = 2
>> as when issuing the above the tool-number value d
> In that case, don't use prepare-prepared. Just link the two signals so
> that as soon as the prepare is set true, prepared becomes true. Most
> example configurations have this because they don't usually have
> changers. This will put all of the control burden on the M6. Do you have
> a tool pos
> My guess is that you need to make sure that your PLC sets tool-prepared
> true when the tool is ready to be changed. The T word invokes the
> prepare - prepared thread, the M invokes the change - changed thread.
> You should be able to check the prepare and prepared signal status with
> HALmeter
ted
net tool-toolprep iocontrol.0.tool-prepare => classicladder.0.in-07
#(bit, in) Should be driven TRUE when a tool prepare is completed
net tool-preped iocontrol.0.tool-prepared <= classicladder.0.out-07
robert
--
R
s seems
to be how KCam works and I found it very convenient.
On Thu, Apr 23, 2009 at 7:59 PM, John Kasunich wrote:
> robert melville wrote:
> > I have just started to use EMC2 with a homemade
> > tabletop mill and like it a lot. However, here
> > is some behavior I have see
I have just started to use EMC2 with a homemade
tabletop mill and like it a lot. However, here
is some behavior I have seen in another controller which I
find very convenient.Is there some way to get EMC2 to do
this also?
Suppose I am running my XY-table in the positive
X direction and I hit the X
g noises from the
motors, but this is quite normal. Using my files will also make these
noises.
I will cc. this to the list for information, but expect that the
attachments will be stripped there.
Hope this helps you, good luck with your machine,
Robert.
Bocska Peter wrote:
> Hello Mr. von Knob
virtual cutter happily around my desktop.
Many thanks,
Robert von Knobloch
---
Jeff Epler wrote:
A web search indicates this is a bug in Suse's gettext package.
https://bugzilla.novell.com/show_bug.cgi?id=264110
You can probably work around this problem by making the followi
installed (and devel version).
Is it gettext, glade or expat that is incompatible ?
Many thanks,
Robert von Knobloch
--
Stay on top of everything new and different, both inside and
around Java (TM) technology - register
hi there
i am based over cambridgeshire in the Fens in east anglia. i am
currently fitting EMC to one of our old VMC see here
http://cnczone.com/forums/showthread.php?t=73943
i have been doing a bit on and off when not to bussy with real work ;)
but its now back together and i should have swit
not stalling, just simply NO movement... If
I were to exit, run Axis, I then could test the axis, and it moved I then
would note how far it moved.. Go BACK into stepconf to tweak, then back to Axis
to test.. VERY VERY inconvenient but I got it..
Robert I. Shell
Senior Programmer Analyst
setting the feed rate
like F300 but it still does not move.. I have found out that if I start a file,
let it run a few lines then the machine can be moved by the arrow keys for the
rest of the day.. I have tried setting the speed etc and to no avail.. How
can I get around this?
Robert I. Shell
Jeff,
Thanks for your solution, which worked perfectly.
Just for my benefit, I would like to know if I misunderstood the command or
does it not work as documented?
Regards,
Robert
--
Open Source Business Conference
my understanding here wrong? Can anyone suggest a solution?
Regards,
Robert von Knobloch
--
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source:
hi kirk
thank for the link, isnt that chip 0 -5v analog only? so one would need
voltage devider or something to feed the chip.
surly i should be able to find a serial ADC like that little chip, but 0
-10v in
rob
Kirk Wallace wrote:
> If you want to do a little soldering, this should work:
>
> h
hi
looking for a ADC that i can input a 0 - 10v signal and feed it into
EMC, its for Spindle Load so does not have to be super fast etc, 12bit
or so would be fine.
does any one have any sudjestions etc
rob
--
Open Sour
hi
looking for a ADC that i can input a 0 - 10v signal and feed it into
EMC, its for Spindle Load so does not have to be super fast etc, 12bit
or so would be fine.
does any one have any sudjestions etc
rob
--
Open Sour
very nice, and very neat and quick
any way to add offset this quick and easy for a tool, for cutter comp
for the D value
>
> In Touch Off, select "T" (tool table), enter 0.5
>
> The tool table will be rewritten with the correct Z length to make the
> DRO show Z 0.5. A new G43 command will be issu
we are now fitting EMC onto our Leadwell CNC milling machine, see
CNCzone forum for some info.
we too feel the tool table could do with some better intergration for
easy of use for show floor workers and as you have found changes are
made easy and quick
maybe it could be added to a new tab, ab
just after i sent the message i rembered seeing the option in the RT
section, inabled it and it gave me the rtai_math.ko file
in the few instructions around i never saw menthion of needing to select
this
Alex Joni wrote:
>>> '/usr/realtime-2.6.24rtai-3.6.1-smp/modules/rtai_math.ko': No such file
. Johnson wrote:
> Robert,
>
> Are you using the SMP packages that were recently posted to 'experimental'?
> If so, it sounds like you missed installing one of the packages.
> Rtai_math.ko is in the package
> 'rtai-modules-2.6.24-16-rtaismp_3.6.1-linuxcnc.4
Hi all
i have just got my SMP kernel working and RT built
running all the Realtime tests seem to run nicly, no errors and no
kernel panics, system crashes, etc
i have just updated my CVS of EMC and reran the configure and make files
$ ./configure --enable-run-in-place
$ make
$ sudo make setuid
Thanks Jeff,
I created a '.axisrc' file and bound my choice of keys.
All working fine.
Robert
--
Create and Deploy Rich Internet Apps outside the browser with Adobe(R)AIR(TM)
software. With Adobe AIR, Ajax
one heard of this problem / got a fix etc.?
Best regards,
Robert von Knobloch
--
Create and Deploy Rich Internet Apps outside the browser with Adobe(R)AIR(TM)
software. With Adobe AIR, Ajax developers can use existing skills
Chris & Jeff,
many thanks for the answer, it's obvious when you realise the constraints.
Have a nice weekend.
Regards,
Robert
--
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to
Y or Z movement, although it does
when only rotary motion is programmed.
This seems to me to incorrect operation, but it is also possible that I
have misunderstood something. Can anyone tell me if I am driving the
machine wrongly or is there a bug in
Yes I'm using EMC2. What you have written I have already done but nothing
worked. Could bee a problem in the files?
I'm pretty new tho EMC2 end controlling machines with it so i don't know
much.
Here are the files that I'm working with so if you have the chance to look
at it please do so
Thanks
*HAL and INI files*
--
Hallo
I'm Robert Lovreković a student of electroengenering and I'm trying to power
some motor with EMC2. I did it with stepconf wizard and it worked but now i
have to write the ini file and hal. I have some files written but i cant
equested position via a M19 S(degreese), using a M
code to switch from spindle mode to index mode throughout a program.
robert
>
> -
> This SF.Net email is sponsored by the Moblin Your Move Developer's chall
Leslie Newell wrote:
> Does anyone know the current state of lathe support? I have been
> searching through the wiki and docs and haven't found a definitive list
> of what is actually implemented at the moment.
> CSS?
> radius/diameter modes?
> Threading canned cycles?
>
> Thanks,Les
>
>
Hi le
Frank Tkalcevic wrote:
> I'm about to start converting my lathe to cnc and I am wondering how other
> users of the 5i20 + 7i33 have wired it up.
>
> I have some +/-10v servo controllers that I am planning to drive with the
> 5i20+7i33 combo. My computer is about 3 meters away. I was planning to
>
Alex Joni wrote:
>> This was a known bug on the older system, like last year. I thought
>> they got that fixed!
>> Not so, or is Mario using an old version of Ubuntu?
>>
>
> We "fixed" that on 6.06 dapper by not allowing the system to see more than
> 1G of ram.
> By the time haryd came up, t
HI mario
have you checked to see if realtime is running already for some odd reason
quick and dirty way is to run these commands, and try EMC see if it
loads a config
halcmd unloadrt all
sudo /etc/init.d/realtime stop
if you do a , u should see no RT compoents running
lsmod | grep rtai
see if
s some nice info and graphs
http://digital.ni.com/public.nsf/allkb/806F6F0B775FAF32862572FA0052F2AB
this one is also good read too
http://support.motioneng.com/Downloads-Notes/Tuning/default.htm
robert
> -
> This SF.Net email is spo
Hi frank
glad you fixed it, its also the same if your BIOS has SATA AHCI mode
need to make sure ahci mode is off, found that one out the hard way ;)
as it will work in a standard kernel, where a RT kernel has no support
for AHCI
rob
Frank Tkalcevic wrote:
> Ok, I've solved it. In my BIOS I ha
Andre' Blanchard <[EMAIL PROTECTED]> writes:
>
> At 08:10 AM 10/16/2008, you wrote:
> >Sorry about the late comment on this thread. New to EMC.
> >
> >Another data point for future EMC enhancements related to
> >feedhold/stopping/restarting a program.. On a Siemens Acramatic 2100
> >con
201 - 264 of 264 matches
Mail list logo
