The UV (300-410nm) resins are easily made clear in the visible spectrum.
Mercury lamps in off the shelf DLP projectors output in this range but
the color wheels and optical coatings on the lenses reduce it's efficiency.
On 06/27/2013 09:50 PM, Jon Elson wrote:
The problem with clear resin is
How to make a rapid additive manufacturing process slow:
http://www.3ders.org/articles/20130627-uv-resin-based-muve-1-3d-printer-source-files-released.html
They actually move the laser around on a Cartesian system vs galvo's.
On 06/27/2013 09:48 PM, Jon Elson wrote:
Then Michael Joyce
On Wed, 26 Jun 2013 00:06:39 -0400, you wrote:
When the 3D folks discover that they need offsets or homing, or any of
the other features of linuxcnc, we'll be there to help.
Already done Matt
see
http://reprap.org/wiki/G-code
for supported Reprap Gcode list.
G10 can be used for offsets.
On Wed, Jun 26, 2013 at 2:50 PM, Charles Buckley rijrun...@gmail.comwrote:
Bear in mind that if you separate the GUI from Linuxcnc, you can start to
do things like:
http://arstechnica.com/information-technology/2013/06/windows-8-1-offers-native-drivers-for-3d-printers/
What, run Windows?
On Wed, Jun 26, 2013 at 2:50 PM, Charles Buckley rijrun...@gmail.comwrote:
Bear in mind that if you separate the GUI from Linuxcnc, you can start to
do things like:
http://arstechnica.com/information-technology/2013/06/windows-8-1-offers-native-drivers-for-3d-printers/
What, run Windows?
On 06/27/2013 02:37 AM, Steve Blackmore wrote:
so I don't see what advantage having the printer connected to LinuxCNC could
be
It should avoid little nasties like this (scope pix near the end):
http://softsolder.com/2013/06/04/marlin-firmware-stepper-interrupt-timing/
Arduino-class
Sure.. Windows, Android, iOS... whatever..
Charles
On Thu, Jun 27, 2013 at 3:32 AM, Mark Wendt wendt.m...@gmail.com wrote:
On Wed, Jun 26, 2013 at 2:50 PM, Charles Buckley rijrun...@gmail.com
wrote:
Bear in mind that if you separate the GUI from Linuxcnc, you can start to
do things
It was just a snarky comment on my part about Windows. [?]
Mark
On Thu, Jun 27, 2013 at 9:24 AM, Charles Buckley rijrun...@gmail.comwrote:
Sure.. Windows, Android, iOS... whatever..
Charles
On Thu, Jun 27, 2013 at 3:32 AM, Mark Wendt wendt.m...@gmail.com wrote:
On Wed, Jun 26, 2013
First off.. I don't have a 3d printer.But it seems to me that some
interactivity with the printer might be a very good idea.
How would you feel if you had to run your mill/router/lathe by inserting
an SD card and hitting the run button! 8-O
Even my el-cheaper printers interact with my PC
I suspect that that is on their long-term roadmap.
But, right now, they are trying to re-invent the wheel. After 6 years of
development, they are now only about 30 years behind the industry
standards.
Rep-rap has been developed from the Maker movement. The one major knock I
have against that is
Loading an SD card works because it
is pretty bullet-proof and easy to manage as is just pressing a button.
Also, most of them are running from laptops, so they don't have a
parallel port or PCI slots.
--
This SF.net
I have been randomly watching the 3D printer efforts from the sidelines
and for the most part I have not been impressed at all.
I think you are right ... they are way, way behind. To many, it seems
that reinventing the wheel is how they learn but at the expense of
making any meaningful
I agree with you. When the GGG (Glorified Glue Gun) fad started a few
years ago many of the maker folk looked at Linuxcnc since it had been
used to control multi-axis machines for over a decade. Some of them felt
that it was too complicated and expensive to control their GGG made
mostly of
Well, on January 28th, 2014 the next generation of stereolithography
patents expire. That will increase the resolution a ridiculous amount.
Linuxcnc is a much more adaptable baseline for any of these machines. I
would expect to see a lot of UI changes and movement with it.
On Thu, Jun 27, 2013
On Thursday 27 June 2013 14:59:37 Charles Buckley did opine:
Well, on January 28th, 2014 the next generation of stereolithography
patents expire. That will increase the resolution a ridiculous amount.
Interesting, until some troll crawls out of the swamp. Are there any other
gotchas that
Well, yes, I would expect that to be the case.
http://www.google.com/patents/US6722872
Disclosed is a three-dimensional modeling apparatus (*10*) that builds up
three-dimensional objects in a heated build chamber (*24*) by dispensing
modeling material from a dispensing head (*14*) onto a base
And some further patents:
https://www.google.com/?tbm=pts#tbm=ptstbm=ptsq=ininventor:%22Kornelis+Frits+Feenstra%22bav=on.2,or.r_qf.fp=5b260c5b98cf1da2biw=1527bih=840
On Thu, Jun 27, 2013 at 1:01 PM, Gene Heskett ghesk...@wdtv.com wrote:
On Thursday 27 June 2013 14:59:37 Charles Buckley did
On Thursday 27 June 2013 16:08:14 Charles Buckley did opine:
Well, yes, I would expect that to be the case.
http://www.google.com/patents/US6722872
Disclosed is a three-dimensional modeling apparatus (*10*) that builds
up three-dimensional objects in a heated build chamber (*24*) by
On Thursday 27 June 2013 16:15:48 Charles Buckley did opine:
And some further patents:
https://www.google.com/?tbm=pts#tbm=ptstbm=ptsq=ininventor:%22Kornelis
+Frits+Feenstra%22bav=on.2,or.r_qf.fp=5b260c5b98cf1da2biw=1527bih=84
0
Busy fellow, that Feenstra was. I looked at the first one
3D Systems filed a patent infringement suit against Form Labs for the
Form1 earlier this year. The original patent had expired and the
original patent holder has even sold off over half of his stock.
http://www.wired.com/design/2012/11/3d-systems-formlabs-lawsuit/
IANAL,
But as far as I know, the only part of a patent that *really* matters is
the claims. So even though the description seems obvious, the claims
might say something like: where the insulator is made of pure
unobtainium. That might be non-obvious.
Ken
On 6/27/2013 3:53 PM, Charles Buckley
On Thu, 6/27/13, Charles Buckley rijrun...@gmail.com wrote:
Subject: Re: [Emc-users] Brain-Dead LinuxCNC G-Code Interface?
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Thursday, June 27, 2013, 8:47 AM
I suspect that that is on their
long-term roadmap
On Thu, 6/27/13, Dave e...@dc9.tzo.com wrote:
Subject: Re: [Emc-users] Brain-Dead LinuxCNC G-Code Interface?
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Thursday, June 27, 2013, 9:29 AM
I have been randomly watching the 3D
printer efforts from the sidelines
IANAL as well but the courts seemed to have changed the definition of
obvious.
http://www.patentlyo.com/patent/2013/01/the-federal-circuits-new-obviousness-jurisprudence-an-empirical-study.html
If you look at these obvious patents you'll see that it doesn't even
mean obvious to the layman or
On Thu, 27 Jun 2013 10:31:46 -0400, you wrote:
First off.. I don't have a 3d printer.But it seems to me that some
interactivity with the printer might be a very good idea.
How would you feel if you had to run your mill/router/lathe by inserting
an SD card and hitting the run button! 8-O
I
If you use photopolymers with initiators into the visible spectrum
(400-440nm) you can leave the filters in and still achieve 1 second cure
times per 100um layer.
Clear lenses are possible with features down to the few microns with
inexpensive equipment. Sub-micron (100nm) features are
-Dead LinuxCNC G-Code Interface?
To: emc-users@lists.sourceforge.net
Date: Thursday, June 27, 2013, 4:30 PM
IANAL as well but the courts seemed
to have changed the definition of
obvious.
http://www.patentlyo.com/patent/2013/01/the-federal-circuits-new-obviousness-jurisprudence-an-empirical
Eshelman g_ala...@yahoo.com wrote:
On Thu, 6/27/13, Charles Buckley rijrun...@gmail.com wrote:
Subject: Re: [Emc-users] Brain-Dead LinuxCNC G-Code Interface?
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Thursday, June 27, 2013, 8:47 AM
I suspect
My understanding is that it was done with a small profit motive. There
are several shields for the Arduino's that targeted driving the steppers
and extruders in repraps from several vendors.
http://reprap.org/wiki/List_of_electronics
The only other reason I heard about was the lack of desire
Gregg Eshelman wrote:
Google this (no, not kidding about the name)
lemon curry 3d printer
The design uses a DLP projector with color and UV filters removed. 3D models
are sliced into sections then those profiles are projected either onto the
bottom of a clear tank or onto the top of the
Gregg Eshelman wrote:
What I'd like to see for this type of printer is a clear resin to see if can
print refractive lenses, as is possible with the newer Objet printers.
The problem with clear resin is the light that cures the resin will
penetrate too
deeply, making it hard to have sharp
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 6/25/2013 11:06 PM, Matt Shaver wrote:
On Mon, 24 Jun 2013 10:42:06 -0500 Stuart Stevenson
stus...@gmail.com wrote:
My first reaction is how could this be necessary? Are they not
wanting/able to capture a file to feed to the control? I am
On 06/26/2013 12:06 AM, Matt Shaver wrote:
When the 3D folks discover that they need offsets or homing, or any of
the other features of linuxcnc, we'll be there to help.
That's what I plan to demonstrate: get the M2 running with LCNC as many
folks have already done, then pile on improvements
When the 3D folks discover that they need offsets or homing, or any of
the other features of linuxcnc, we'll be there to help.
Offsets would actually be a great way to handle multiple extruder heads.
On Tue, Jun 25, 2013 at 10:06 PM, Matt Shaver m...@mattshaver.com wrote:
On Mon, 24 Jun
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 6/26/2013 11:00 AM, Ed Nisley wrote:
On 06/26/2013 12:06 AM, Matt Shaver wrote:
When the 3D folks discover that they need offsets or homing, or
any of the other features of linuxcnc, we'll be there to help.
That's what I plan to demonstrate:
On Wed, 26 Jun 2013 12:00:57 -0400
Ed Nisley ed.08.nis...@pobox.com wrote:
On 06/26/2013 12:06 AM, Matt Shaver wrote:
When the 3D folks discover that they need offsets or homing, or any
of the other features of linuxcnc, we'll be there to help.
That's what I plan to demonstrate: get the
Bear in mind that if you separate the GUI from Linuxcnc, you can start to
do things like:
http://arstechnica.com/information-technology/2013/06/windows-8-1-offers-native-drivers-for-3d-printers/
On Wed, Jun 26, 2013 at 12:06 PM, Matt Shaver m...@mattshaver.com wrote:
On Wed, 26 Jun 2013
Gene,
Since you just LOVE the PDP-11s, this should make your day:
http://www.theregister.co.uk/2013/06/19/nuke_plants_to_keep_pdp11_until_2050/
On 06/24/2013 01:13 PM, Gene Heskett wrote:
On Monday 24 June 2013 13:59:47 Stuart Stevenson did opine:
wonders never cease
I just saw a link
On Tuesday 25 June 2013 04:08:40 MC Cason did opine:
Gene,
Since you just LOVE the PDP-11s, this should make your day:
http://www.theregister.co.uk/2013/06/19/nuke_plants_to_keep_pdp11_until_
2050/
That is one of the articles that prompted my tirade.
First off, its nowhere near rad
--
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
On 6/25/2013 3:23 AM, MC Cason wrote:
Gene,
Since you just LOVE the PDP-11s, this should make your day:
http://www.theregister.co.uk/2013/06/19/nuke_plants_to_keep_pdp11_until_2050/
On 06/24/2013 01:13 PM, Gene Heskett wrote:
On Monday 24 June 2013 13:59:47 Stuart Stevenson did
Mark,
They have been on there for quite some time. Think of it as there
way of sponsoring us to do what we like best :-)
I was googling around yesterday, trying to fix a assertion error that
glabels was throwing, and ran across a MS advert, that claimed it could
FIX the assertion
On Tue, Jun 25, 2013 at 11:59 AM, MC Cason farmerboy1...@yahoo.com wrote:
Mark,
They have been on there for quite some time. Think of it as there
way of sponsoring us to do what we like best :-)
I was googling around yesterday, trying to fix a assertion error that
glabels was
On Tuesday 25 June 2013 12:33:29 Mark Wendt did opine:
--
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
On Tuesday 25 June 2013 13:41:58 Dave did opine:
On 6/25/2013 3:23 AM, MC Cason wrote:
Gene,
Since you just LOVE the PDP-11s, this should make your day:
http://www.theregister.co.uk/2013/06/19/nuke_plants_to_keep_pdp11_unti
l_2050/
On 06/24/2013 01:13 PM, Gene Heskett wrote:
On Tue, Jun 25, 2013 at 4:28 AM, Gene Heskett ghesk...@wdtv.com wrote:
Any control computer in a nuke facility really should be rad hard, so that
it can continue to function right up to within a millisecond of being a
glow in the dark crater in the ground. Those PDP-11's aren't.
I don't know
On Tue, 6/25/13, Gene Heskett ghesk...@wdtv.com wrote:
And some are surprised that Nuke plants have problems
periodically!
Dave
Yes, and with all the NRC mandated paperwork, folks don't understand it
costs them 10 grand in legal fees just to replace a faucet washer or flush
valve
On Tue, Jun 25, 2013 at 7:00 PM, Gregg Eshelman g_ala...@yahoo.com wrote:
Pointless, petty, regulatory BS like that, which has zero bearing on the safe
operation of the facility is why the control rooms of nuclear power plants
still look like they're 30 to 40 years old - because they are 30
On Mon, 24 Jun 2013 10:42:06 -0500
Stuart Stevenson stus...@gmail.com wrote:
My first reaction is how could this be necessary?
Are they not wanting/able to capture a file to feed to the control?
I am having trouble imagining a computer so small or a program so
large as to need drip feed.
This is usually called drip feed in the cnc world. I don't know if
linuxcnc has ever been forced into this mode, but it seems doable.
On Mon, Jun 24, 2013 at 10:50 AM, Charles Steinkuehler
char...@steinkuehler.net wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have some folks from
On 24 June 2013 15:50, Charles Steinkuehler char...@steinkuehler.net wrote:
I have some folks from the 3D printer world asking me if LinuxCNC can
be used in a gcode mode similar to how the Arduino currently
operates these machines (a serial terminal that accepts gcode and
spits out the
On Mon, Jun 24, 2013 at 10:58 AM, andy pugh bodge...@gmail.com wrote:
On 24 June 2013 15:50, Charles Steinkuehler char...@steinkuehler.net wrote:
I have some folks from the 3D printer world asking me if LinuxCNC can
be used in a gcode mode similar to how the Arduino currently
operates these
My first reaction is how could this be necessary?
Are they not wanting/able to capture a file to feed to the control?
I am having trouble imagining a computer so small or a program so large as
to need drip feed.
On Jun 24, 2013 10:32 AM, Eric Keller eekel...@psu.edu wrote:
On Mon, Jun 24, 2013
Charles,
What you are asking about actually has broader use than the
drip feed that first comes to mind. If one is using LinuxCNC
as a motion controller in a larger automation system, it could be
very useful to make spontaneous commands for motion, perhaps
generated by a vision system or other
On Mon, Jun 24, 2013 at 11:56 AM, Ralph Stirling
ralph.stirl...@wallawalla.edu wrote:
Charles,
What you are asking about actually has broader use than the
drip feed that first comes to mind. If one is using LinuxCNC
as a motion controller in a larger automation system, it could be
very
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 6/24/2013 10:56 AM, Ralph Stirling wrote:
Charles,
What you are asking about actually has broader use than the drip
feed that first comes to mind. If one is using LinuxCNC as a
motion controller in a larger automation system, it could be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 6/24/2013 10:42 AM, Stuart Stevenson wrote:
My first reaction is how could this be necessary? Are they not
wanting/able to capture a file to feed to the control? I am having
trouble imagining a computer so small or a program so large as to
need
On 24 June 2013 17:08, Eric Keller eekel...@psu.edu wrote:
I agree, I have an application that does something similar, and I
could have programmed it in gcode if I wanted. The application moves
a microscope on a linear stage. So this use of linuxcnc has occurred
to me in the past. It
Hi
Yes, the best option if someone _really_ wanted to do this seems to be
running the rsh interface and just sending gcodes one at a time as MDI
commands.
Well, I did something like that using rsh recently, but there is a big
problem with it: As far as I can see a continuous motion (G64) is
andy pugh wrote:
On 24 June 2013 15:50, Charles Steinkuehler char...@steinkuehler.net wrote:
I have some folks from the 3D printer world asking me if LinuxCNC can
be used in a gcode mode similar to how the Arduino currently
operates these machines (a serial terminal that accepts gcode and
On Monday 24 June 2013 13:16:57 Stuart Stevenson did opine:
[...]
I am having trouble imagining a computer so small or a program so large
as to need drip feed.
[...]
I have a friend on the CoCo mailing list that has written, in rsbasic,
using data statements, code to drive a home made milling
wonders never cease
I just saw a link for a PDP-11 assembly programmer for a job to last until
2050
seems as if anything is possible
On Mon, Jun 24, 2013 at 12:26 PM, Gene Heskett ghesk...@wdtv.com wrote:
On Monday 24 June 2013 13:16:57 Stuart Stevenson did opine:
[...]
I am having
On Monday 24 June 2013 13:59:47 Stuart Stevenson did opine:
wonders never cease
I just saw a link for a PDP-11 assembly programmer for a job to last
until 2050
seems as if anything is possible
Even including that insanity, because based on my experience with a
PDP-11/723, that would have
IIRC, the Arduino systems cache a series of incoming g-code lines, then
runs them out to the printer.
When you look at moving Linuxcnc onto Beaglebone and Raspberry Pi, the
implementation of a modified drip-type system might work better. You take a
pretty significant hit if you are trying to run
I've had exactly the opposite experience. 10 years of solid on time.
Never turned the machine off. :-)
Dave
On Mon, 2013-06-24 at 14:13 -0400, Gene Heskett wrote:
On Monday 24 June 2013 13:59:47 Stuart Stevenson did opine:
wonders never cease
I just saw a link for a PDP-11 assembly
On 6/24/2013 12:17 PM, Florian Rist wrote:
Hi
Yes, the best option if someone _really_ wanted to do this seems to be
running the rsh interface and just sending gcodes one at a time as MDI
commands.
Well, I did something like that using rsh recently, but there is a big
problem
LinuxCNC is free. :)
On Jun 24, 2013 5:34 PM, Dave e...@dc9.tzo.com wrote:
On 6/24/2013 12:17 PM, Florian Rist wrote:
Hi
Yes, the best option if someone _really_ wanted to do this seems to be
running the rsh interface and just sending gcodes one at a time as MDI
commands.
Well, I
On Mon, 6/24/13, Stuart Stevenson stus...@gmail.com wrote:
Subject: Re: [Emc-users] Brain-Dead LinuxCNC G-Code Interface?
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Monday, June 24, 2013, 9:42 AM
My first reaction
Ok.. you got me...
Dave
On 6/24/2013 6:37 PM, Stuart Stevenson wrote:
LinuxCNC is free. :)
On Jun 24, 2013 5:34 PM, Davee...@dc9.tzo.com wrote:
On 6/24/2013 12:17 PM, Florian Rist wrote:
Hi
Yes, the best option if someone _really_ wanted to do this seems to be
69 matches
Mail list logo