sourceforge.net
> > Subject: Re: [Emc-users] Another confusion point for PCW
> >
> > On Sunday 02 December 2018 16:18:13 andy pugh wrote:
> >> On Sun, 2 Dec 2018 at 21:03, Gene Heskett
> >> wrote:
> >>
> >> For outputs, the dmesg and the
sourceforge.net
> > Subject: Re: [Emc-users] Another confusion point for PCW
> >
> > On Sunday 02 December 2018 16:18:13 andy pugh wrote:
> >> On Sun, 2 Dec 2018 at 21:03, Gene Heskett
> >> wrote:
> >>
> >> For outputs, the dmesg and the
sourceforge.net
> > Subject: Re: [Emc-users] Another confusion point for PCW
> >
> > On Sunday 02 December 2018 18:53:38 andy pugh wrote:
> >> On Sun, 2 Dec 2018 at 22:37, Gene Heskett
wrote:
> >>> 5i25 P2-7, no signal here except in the halui stanza, direction
On Sun, 2 Dec 2018, Gene Heskett wrote:
Date: Sun, 2 Dec 2018 21:03:05 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Another confusion point for PCW
On Sunday 02 December 2018 18:53:38 andy
On Sunday 02 December 2018 18:53:38 andy pugh wrote:
> On Sun, 2 Dec 2018 at 22:37, Gene Heskett wrote:
> > 5i25 P2-7, no signal here except in the halui stanza, direction
> > shows there in a halmeter.
> > bit OUT FALSE hm2_5i25.0.gpio.027.in PWMGEN dir
> > output bit OUT
On Sun, 2 Dec 2018, Gene Heskett wrote:
Date: Sun, 2 Dec 2018 17:35:38 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Another confusion point for PCW
On Sunday 02 December 2018 16:18:13 andy
On Sun, 2 Dec 2018, Gene Heskett wrote:
Date: Sun, 2 Dec 2018 17:35:38 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Another confusion point for PCW
On Sunday 02 December 2018 16:18:13 andy
On Sun, 2 Dec 2018 at 22:37, Gene Heskett wrote:
>
> 5i25 P2-7, no signal here except in the halui stanza, direction shows
> there in a halmeter.
> bit OUT FALSE hm2_5i25.0.gpio.027.in PWMGEN dir output
> bit OUT TRUE hm2_5i25.0.gpio.027.in_not IF output_type=1,
On Sunday 02 December 2018 16:18:13 andy pugh wrote:
> On Sun, 2 Dec 2018 at 21:03, Gene Heskett
> wrote:
>
> For outputs, the dmesg and the halscope selector both appear to be
>
> > correct, I just fired up lcnc and ran the halscope, no signals from
> > the machine are connected to anything as
sts.sourceforge.net
> > Subject: [Emc-users] Another confusion point for PCW
> >
> > Greetings;
> >
> > in the dmesg outout, and in the output of "show pins", as I try to
> > sort out what I can do and where with this new 7i76 card, I see the
> > f
On Sun, 2 Dec 2018 at 21:03, Gene Heskett wrote:
For outputs, the dmesg and the halscope selector both appear to be
> correct, I just fired up lcnc and ran the halscope, no signals from the
> machine are connected to anything as I am waiting on some 5 pin
> connectors, and the 8 stepgen sigs,
On Sunday 02 December 2018 10:11:38 andy pugh wrote:
> On Sun, 2 Dec 2018 at 14:17, Gene Heskett wrote:
> > Am I understanding things correctly? That dmesg is correct and "show
> > pins" is showing me stuff I can't use because its already used by
> > the stepgens?
>
> No, the other way round.
Greetings;
in the dmesg outout, and in the output of "show pins", as I try to sort
out what I can do and where with this new 7i76 card, I see the first 8
gpio's in the 5i25 are available as outputs only, yet as I'm
understanding it, those are actually used as stepgen step-dir pairs, fed
to
13 matches
Mail list logo