On Tuesday 09 April 2019 08:40:19 Todd Zuercher wrote:
> Gene,
>
> And that is why if you had bought a comparable machine state side from
> a reputable manufacturer who would have stood behind it and supported
> it you would have paid 5 to 10 times as much for it. You'd have been
> paying for tho
> From: Sam Sokolik [mailto:samco...@gmail.com]
> STMBL amps are really quite cool
>
> Me playing with one as a spindle drive..
>
> https://www.youtube.com/watch?v=7LAtx8o48jI
And mine turning a harmonic drive. I'm using the step/direction interface.
Except now that I've wired it into my
(but this also assumes external interface hardware like mesa where around
100us latency is ok.)
sam
On Tue, Apr 9, 2019 at 11:00 AM Sam Sokolik wrote:
> With rt_preempt realtime - I have had pretty good luck with laptops..
> (although the one I have in that video is probably the worse one I hav
With rt_preempt realtime - I have had pretty good luck with laptops..
(although the one I have in that video is probably the worse one I have
found so far.. - it runs a 500hz thread 'ok') my previous laptop ran 1khz
no problem.
sam
On Tue, Apr 9, 2019 at 10:56 AM Rafael Skodlar wrote:
> On 4/9/
On 4/9/19 6:09 AM, Sam Sokolik wrote:
STMBL amps are really quite cool
Me playing with one as a spindle drive..
https://www.youtube.com/watch?v=7LAtx8o48jI
Impressive Sam. Added a brownie point to your video. It would be nice to
see the block diagram of your setup. What impressed me is
raham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Gene Heskett
Sent: Monday, April 08, 2019 9:18 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Motorman Robot with absolute Yaskawa
On Monday 08 April 2019 17:10:26
STMBL amps are really quite cool
Me playing with one as a spindle drive..
https://www.youtube.com/watch?v=7LAtx8o48jI
On Tue, Apr 9, 2019 at 6:27 AM Gene Heskett wrote:
> On Tuesday 09 April 2019 05:53:41 andy pugh wrote:
>
> > On Tue, 9 Apr 2019 at 02:54, Gene Heskett wrote:
> > > You al
On Tuesday 09 April 2019 05:53:41 andy pugh wrote:
> On Tue, 9 Apr 2019 at 02:54, Gene Heskett wrote:
> > You also mentioned that the driver isn't available, is it still
> > being (re)written?
>
> Hardware driver ( IRAM256-2067-A2 ).
That does tend to drop a wrench in the gears. :(
> The softwa
On Tue, 9 Apr 2019 at 02:54, Gene Heskett wrote:
> You also mentioned that the driver isn't available, is it still being
> (re)written?
Hardware driver ( IRAM256-2067-A2 ). The software side of things works
really well.
(plug the STMBL into a Mesa smart-serial port, velocity / position
command a
The undocumented chinese parts we buy from eBay are many times sold by a
mon and pop eBayer maybe working out of her apartment. The last two time
I had to get stuff swapped I learn she was a mom with two small kids who
did this so she could be home with the kids. She knew absolutely ZERO
about t
On Monday 08 April 2019 18:15:47 andy pugh wrote:
> On Mon, 8 Apr 2019 at 21:15, Gene Heskett wrote:
> > > How do you work that out? It's open-source hardware.
> > > You can even build it yourself.
> >
> > TANSTAAFL. People need to eat and pay the rent. Flush the toilet,
> > etc etc. That says th
On Monday 08 April 2019 17:10:26 Chris Albertson wrote:
> Gene,
>
> It is 2019. The money is made today with the service sector.Yes I
> could sell widgets and make $50 for each one sold. But it is better
> to give away the widgets and then charge for widget services including
> installation,
On Mon, 8 Apr 2019 at 21:15, Gene Heskett wrote:
> > How do you work that out? It's open-source hardware.
> > You can even build it yourself.
>
> TANSTAAFL. People need to eat and pay the rent. Flush the toilet, etc
> etc. That says they'll expect to get paid for their time.
Just like the LinuxC
Gene,
It is 2019. The money is made today with the service sector.Yes I
could sell widgets and make $50 for each one sold. But it is better to
give away the widgets and then charge for widget services including
installation, training and consulting. The service pays far more than does
manuf
On Monday 08 April 2019 13:52:54 andy pugh wrote:
> On Mon, 8 Apr 2019 at 15:12, Gene Heskett wrote:
> > > About $100 including heatsink, DIN mount and screen-printed case.
> > > But that was a not-for-profit batch of 50 that I had made.
> >
> > Meaning for profit propduction will be closer to $2
On Mon, 8 Apr 2019 at 15:12, Gene Heskett wrote:
> > About $100 including heatsink, DIN mount and screen-printed case. But
> > that was a not-for-profit batch of 50 that I had made.
>
> Meaning for profit propduction will be closer to $200 USD/axis.
How do you work that out? It's open-source har
On Monday 08 April 2019 06:36:58 andy pugh wrote:
> On Mon, 8 Apr 2019 at 11:21, Gene Heskett wrote:
> > Thanks Andy. Looks like a quite capable board set. Is it purchasable
> > assembled from somebody?
>
> No. As I said in the email when I first mentioned it.
>
> > For how much an axis?
>
> Abou
On Mon, 8 Apr 2019, rudy du preez wrote:
Date: Mon, 8 Apr 2019 08:58:45 +0200
From: rudy du preez
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Motorman Robot with absolute Yaskawa
On Mon, 9 Sep 2013 at 14:48, Rud
On Mon, 8 Apr 2019 at 11:21, Gene Heskett wrote:
> Thanks Andy. Looks like a quite capable board set. Is it purchasable
> assembled from somebody?
No. As I said in the email when I first mentioned it.
> For how much an axis?
About $100 including heatsink, DIN mount and screen-printed case. But
On Monday 08 April 2019 05:37:59 andy pugh wrote:
> On Mon, 8 Apr 2019 at 10:17, Gene Heskett wrote:
> > Andy? I may have seen it pass by, but what does the STMBL acronym
> > translate to?
>
> It is explained here, along with everything else:
> https://github.com/rene-dev/stmbl/blob/master/docs/s
On Mon, 8 Apr 2019 at 10:17, Gene Heskett wrote:
> Andy? I may have seen it pass by, but what does the STMBL acronym
> translate to?
It is explained here, along with everything else:
https://github.com/rene-dev/stmbl/blob/master/docs/src/Getting%20Started.adoc
--
atp
"A motorcycle is a bicycle
On Monday 08 April 2019 05:01:39 andy pugh wrote:
[...]
> It is a problem that has been solved by the STMBL servo drive project.
[...]
Andy? I may have seen it pass by, but what does the STMBL acronym
translate to?
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
On Monday 08 April 2019 02:58:45 rudy du preez wrote:
> >On Mon, 9 Sep 2013 at 14:48, Rudy du Preez wrote:
> >> I am busy converting a Motorman 6-axis robot to Linuxcnc. The
> >> original Yaskawa motors and servo drives are used. The motors are
> >> all fitted with absolute encoders. The encoders
On Mon, 8 Apr 2019 at 08:16, rudy du preez wrote:
> Sort of, but not reliably. To read the first part of the serial data
> containing the abs encoder positions was a real problem.
It is a problem that has been solved by the STMBL servo drive project.
If you replaced the servo drives with STMBL
>On Mon, 9 Sep 2013 at 14:48, Rudy du Preez wrote:
>> I am busy converting a Motorman 6-axis robot to Linuxcnc. The original
>> Yaskawa motors and servo drives are used. The motors are all fitted
>> with absolute encoders. The encoders have ..
>
>Hi Rudy
>I know this is a while ba
On Mon, 9 Sep 2013 at 14:48, Rudy du Preez wrote:
> I am busy converting a Motorman 6-axis robot to Linuxcnc. The original
> Yaskawa motors and servo drives are used. The motors are all fitted with
> absolute encoders. The encoders have ..
>
Hi Rudy
I know this is a while back, but
Quote: "Peter C. Wallace"
snip -
Well... Thats not entirely true, the muxed data serial can be recovered just
like the muxed encoder data is. 9600 baud is so slow that the muliplexing will
cause minimal distortion (it will be sampled at 4 MHz so something like 400
samples/bit time)
So _it i
Run physical signal to two pins? Encoder & gpio. Encoder wont care about
extra twiddling at start (and you're going to reset its counter anyway).
Gpio (uart) doesn't care if you ignore its output later.
SMD
On Tue, Sep 10, 2013 at 1:50 PM, Rudy du Preez wrote:
> I now realize that the A phas
On 10 September 2013 21:09, Greg Bentzinger wrote:
> Remember this serial input will be needed for every joint/servo drive.
>
> That is several serial channels if they need to be read all at once. Otherwise
> you will need some form of switching unit to feed each channel as you
> 'home/read home
On Tue, 10 Sep 2013, Rudy du Preez wrote:
> Date: Tue, 10 Sep 2013 19:50:53 +0200
> From: Rudy du Preez
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Motorman Robot with absolute Yaskawa enco
I now realize that the A phase cannot go through the counter in the firmware
of the 6i25+7i77 setup and then read serial data.
Would it be easier to use a 5i20 + 7i33 combination. Then modify the
firmware so under some control input bit the A phase is first passed through
by-passing the counter, s
On Mon, 9 Sep 2013, Rudy du Preez wrote:
> Date: Mon, 9 Sep 2013 14:28:25 +0200
> From: Rudy du Preez
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Motorman Robot with absolute Yaskawa encoders
On 9 September 2013 13:28, Rudy du Preez wrote:
> The encoders have differential A and B pulse trains, but
> the A channel is used in the beginning to send 8 bytes of serial data plus
> some incremental pulses to establish the absolute positions of the axes when
> activating the robot after a star
I am busy converting a Motorman 6-axis robot to Linuxcnc. The original
Yaskawa motors and servo drives are used. The motors are all fitted with
absolute encoders. The encoders have differential A and B pulse trains, but
the A channel is used in the beginning to send 8 bytes of serial data plus
some
34 matches
Mail list logo