David,
This sounds familiar in a way.
The practice in The Netherlands is that your monthly fixed "meter
charge" is dependent on the "strength" of the connection, even though
every home is already has wiring to the 3-phase grid with plenty fat
connections, a home is typically wired with a few 16A br
Yes you are right. Dangerous. I got away with it and charged a 30kw Leaf on a
20 amp circuit. By noon and rising temperatures(40 degrees) it was tapering.
126 miles, plenty of range to get back to San Francisco. Wiring upgrade to
come. Lawrence Rhodes
-- next part -
On 12/25/2016 07:14 PM, EVDL Administrator via EV wrote:
On 25 Dec 2016 at 14:56, Cor van de Water via EV wrote:
The source I was reading said that to keep the rates low, many Spanish homes
have a total capacity of just 3.3kW! (
You'd have to upgrade a 3.3kW home to at least 4.4kW
and mo
l.org/evln/
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20161225/6ff4ae8a/a
On 25 Dec 2016 at 14:56, Cor van de Water via EV wrote:
> ... the 2011/2012 Leaf ... is specifically aimed at the European situation
> where most plugs and circuits are rated and fused to 230V 16A which
> means a max 3.7kW so a 3.3kW charger maxes out a standard wall plug in
> Europe ...
This re
The elimination of the $7,500 tax break associated with EVs would be
beneficial to Tesla since they have just about used up their allotted
200,000 production allotted to each manufacture. It would level the playing
field for them.
Of Course it would hurt those who still have only partially used t
I am sure Lawrence is talking about his 2016 Leaf with 30kWh (not kW)
pack.
Since it is a newer Leaf, it will charge at 6.6kW instead of the 3.3
that the 2011/2012 Leaf takes (which is specifically aimed at the
European situation where most plugs and circuits are rated and fused to
230V 16A which m
<http://groups.yahoo.com/group/NEDRA>
Yahoo! Groups<http://groups.yahoo.com/group/NEDRA>
groups.yahoo.com
/
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20161225/25bfce80/attachment.htm>
__
On 25 Dec 2016 at 13:03, Cor van de Water via EV wrote:
> Even though the (cold-exposed) breaker might not trip, please remember the
> purpose of the breaker is to protect the *wire* after the breaker from
> overload.
The breaker is also intended to protect the receptacle and connected
equipment
On 25 Dec 2016 at 19:42, Lawrence Rhodes via EV wrote:
> I have been charging the 30kw Leaf for hours now and still not tripped the
> breaker here in Modesto ...
I take it this is 240v, so you have a 125 amp breaker? That's what you
would need to deliver 30kw. I assume that's wired directly to
All modern multi-voltage high power supplies and chargers that I know
use a PFC (Power Factor Correction) front end to guarantee that they
draw current in phase with the voltage and correct the power factor to
very close to 1 so that the load looks like a resistor with the real
Wattage identical to
EVSE. Lawrence Rhodes
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20161225/abe7ed7c/attachment.htm>
___
UNSUBSCRIBE: http://www.evdl.org/help/index.htm
Thank you, Bruce and Lee. That is the additional information I was looking for.
The only way I have to measure the power factor of my Kia Soul EV+ is
to charge off of 120V. Is it safe to assume that the PF on 120V will
be substantially similar at 240V?
Thank you again and hope you are having a ve
EVSE. Lawrence Rhodes
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20161225/abe7ed7c/attachment.htm>
___
UNSUBSCRIBE: http://www.evdl.org/help/index.htm
From: David Nelson via EV
>Please note that I am not asking about electrical code here! I know
>what the code says.
>
>What is the actual sustained current carrying ability of the NEMA
>L6-30 plug/sockets?
The ACTUAL capacity is determined by the temperature rise. The materials used
to make the
e
> > Rhodes
> > -- next part ------
> > An HTML attachment was scrubbed...
> > URL:
> > <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20161225/b019ca91/attachment.htm>
> > _
em sparked the fire in one of the cars ...
http://evdl.org/evln/
For all EVLN EV-newswire posts
{brucedp.neocities.org}
--
View this message in context:
http://electric-vehicle-discussion-list.413529.n4.nabble.com/EVLN-EV-newswire-posts-for-20161225-tp4685064.html
Sent from the Electric Vehicle D
I will assume you will be only loading the connectors with today's standard
of power factor corrected (pfc) chargers (no current spikes). Spiky current
loads make connectors cook. If you get a chance to see an old 1990's
conversion using a spiky BC-20 (light dimmer) charger that has a L6-30
connect
I've done that with one of my adapters for a Zivan NG3 so I could use
it with a 14-30 or 14-50 receptacle. Do you know of any locking 50A
plugs/receptacles that aren't $70+ each?
On Sun, Dec 25, 2016 at 12:27 AM, Cor van de Water via EV
wrote:
> David,
> I have not much experience with L6-30 conn
I'm not sure of the quality of the sockets used by the evseupgrade
adapters I have so the over time quality of the connections might be a
concern. I suppose I could use the L6-30 now and when I upgrade to a
faster charging vehicle and will be using the full 40A capacity I can
change to a different
les on the dash. Has anyone ever tried to plug their EVSE into a 20
amp circuit with a 6.6kw EV? . Lawrence Rhodes
-- next part --
An HTML attachment was scrubbed...
URL:
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20161225/
David,
I have not much experience with L6-30 connectors and whether its
contacts are same or different than a 50 Amp version (which you really
need to sustain 40A continuous). The NEMA 14-30 and 14-50 (the flat
blade clothes dryer and RV plugs) are often identical, you can get a
plug that has two d
On 24 Dec 2016 at 23:32, David Nelson via EV wrote:
> What is the actual sustained current carrying ability of the NEMA
> L6-30 plug/sockets?
I may be proven wrong, but I don't think you're going to get a definitive
answer to this question. The manufacturer and vendors will tell you it's 30
am
23 matches
Mail list logo