Tim,
There is a reason that many people recognize the Cubase software name.
They are simply at the top of the game. You can use the version that
ships with the PreSonus Firebox in combination with the PowerSDR
software for fantastic results.
The only con I can think of in this setup is that it
This is cool. It's great to be able to discuss the nuances of what
really goes on within our radios. Spreading the word is a very good
thing. I checked out John's(N8UR) web site and I'm inspired. I have
an E5052A Signal Source Analyzer setting here and plan to make a few
measurements.
Here's
Great plan, John. I only had access to the 5052A for a day, so was
pretty limited in what I could do; it's great that you'll be able to
carry things forward.
The one addition I would suggest is that you duplicate the DDS output
measurements using the 10MHz source as well as the VF
I should have mentioned when I originally posted this that care needs to
be taken to make sure that the Cubase software does NOT use the same
output channel as the PowerSDR software. Not taking proper precautions
here could cause the full output voltage (~6V) to be put into the radio
which will
The DDS does in fact divide the clock down. Let me give an example.
To make it easier for me to explain, let's take the case of outputting
a square wave.
In this case the phase to amplitude lookup table has the first half of
the table filled with ones and the second half filled with zeros. Now
Eric and all,
I did the below, and installed the revised Pre 10. Won't run. Get a
fatal error.
73, Chas W1CG
At 05:51 PM 1/4/2006, Eric Wachsmann - FlexRadio wrote:
The best way to do this is to go through the Control Panel -
Add/Remove Programs and remove Preview 10 there. That should
OK folks. I got my Firebox today, used the quick start guide and got it
working in minutes. No problems.
I loaded CuBase, didn't even open the application and when I try to run
PowerSDR (any flavor from 1.44 up) I get a fatal error. It fails at the
point where the splash screen says
A. Reproducibility - the mark of a good bug.
My apologizes for not reading today's posts before diving into CuBase.
New toys, you know?
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-Original Message-
From: Charles Greene
Tim,
Strangely enough, I had problems when I tried to duplicate my earlier
test. When I tried to install Cubase LE on my system, it hang with the
message skipping file on some font stein___.ttf. I was able to start
the program from the executable in the program menu, but this didn't
make me
Folks
Missed you on our Teamspeak session last night It's about time!
Had a good discussion amongst a few people working on both the projects
(Xylo) and Flex. Guess the fantastic Texas - USC entertainment got most
others!
Bob K5KDN is working on a Timebase board, chassis etc and has a Jupiter
Sorry I couldn't join in the fun; just too many things going on.
TVB's PIC divider is a really elegant hack, and works very well. I'm
currently working on a project for TAPR for a universal divider (to take
any common frequency standard output and drop it to 1pps) and started
out planning to use
At 04:14 PM 1/5/2006, Eric Ellison wrote:
Folks
Missed you on our Teamspeak session last night It's about time!
Had a good discussion amongst a few people working on both the projects
(Xylo) and Flex. Guess the fantastic Texas - USC entertainment got most
others!
And of course, people on
Jim
Yeah, I've heard that, on the West Coast if you leave at 5 and have a 20
minute commute, you get home by 10. (smile)
I'll push it up some in the future. I'm old and pretty much fade by 9 these
days.
Eric
-Original Message-
From: Jim Lux [mailto:[EMAIL PROTECTED]
Sent: Thursday,
John
Thanks, yep, I really like that design. There is a great deal I think we can
do on the FPGA and it may come to pass that we will do what you are
suggesting and attempting. I feel certain that we will have enough le's to
do it if we have the programmer to do it. We are still just bouncing
I must have missed the change in schedule of the Teamspeak meeting,
is this change permanent?
At 06:14 PM 1/5/2006, Eric Ellison wrote:
Folks
Missed you on our Teamspeak session last night It's about time!
Had a good discussion amongst a few people working on both the projects
(Xylo) and
Cecil
No you didn't miss. This was just for the Time Nuts! I punned it It's about
time... Most of the Time Nuts didn't attend. I am going to make it much
later Eastern time next time so Jim can get home in time to spend some time
on Teamspeak. I think that would be his first time. I didn't
16 matches
Mail list logo