Bob,
Confusion, where is the confusion ? Surely not from my part. Read the
thread again, please. Paul asked if someone had HRD working with the
Flex 5K.
I simply answered that I have not a Flex5K, but only a SDR1k. That did
not imply that the Flex5k did not work with HRD. I do not understand how
I confirmed this behaviour before but never heard any comments.
Had not the time to make any investigations.
I tried to reproduce this effect last night with svn1644 and could not hear
it but it was just a quick test and maybe not representative.
Gerd
DJ8AY
-Original Message-
From:
Neal,
If you want to work the digital modes with the fabulous programs included
with HRD (PSK31 DM780), don't forget that you need to install VAC also.
73, Ray, K9DUR
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
thoughts on
this? Am I missing something simple? Etc.?
73, Ray, K9DUR
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
s/20071012/621f7425/attachment.html
All,
I made a revision to the CAT code last night (SVN1658) that removed
SDR-1000 from the ID as: list on the Setup Form CAT tab and replaced it
with PowerSDR. Since all current FlexRadios use PowerSDR, I felt this was
a more appropriate selection. I think I should clarify what the ID as:
Ray,
I don't disagree with the basic approach, but what about the QRM
possibilities of having two independent AF sources modulating the radio
possibly over driving with too much AF gain? Reminiscent of digital
mode operators that chatted up the bands since there mic was open at the
same time
and some show
control stuff, so I never had to fool with mfr ids.
Jim, W6RMK
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071012/3bbebe35/attachment.html
Hi Bob
I just installed 1640 and created a fresh database. In Setup/CAT Control
I still have SDR-1000, not PowerSDR. I probably missed something.
73
José F5JD
Bob Tracy a écrit :
All,
I made a revision to the CAT code last night (SVN1658) that removed
SDR-1000 from the ID as: list on the
At 08:42 AM 10/12/2007, FireBrick wrote:
I would prefer the voice keyer be intetgrated into Pwsdr.
One less box, thingy on the desk to grab rfi and/or button to push.
What if it were software, but not part of PowerSDR? No cables/boxes,
but declutters PowerSDR.
Jim, W6RMK
Tim,
I see your point. However, the QRM issue could be easily handled by
determining where the PTT signal was coming from. If from the COM port,
then disable mic input. Also, I would not want to take away the current
Auto Enable feature for DIGL DIGU modes I see this as an additional
option.
Certainly a variety of views and opinions are presented. Some
observations:
-mass confusion about what SDR is, with many assuming it is no more that
control of the radio by a computer.
-mass confusion over what is meant by SDR vs DSP vs Digital.
-passion against radios without knobs.
-Some
what non-SDR owners think about the concept.
I added my Flex story to the thread.
Zack
N8FNR
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071012/5e6351c7/attachment.html
was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071012/a6c3e728/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive
Bill,
I also want to avoid one more hardware box. But, with VAC vCOM, we have
all of the facilities we need for a stand-alone voice keyer program, IF
PowerSDR can be modified to allow simultaneous use of both VAC the
microphone. No extra hardware boxes, just another program running, which
Jim,
You wrote, What if it were software, but not part of PowerSDR? No
cables/boxes, but declutters PowerSDR.
That is EXACTLY what I am suggesting.
73, Ray, k9DUR
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
--
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071012/5e6351c7/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman
/20071012/621f7425/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http
I would prefer the voice keyer be intetgrated into Pwsdr.
One less box, thingy on the desk to grab rfi and/or button to push.
Plus, for traveling, one less item to carry and foreget the cables for.
I don't do much ssb contesting, but for DXing, I presently use the MFJ and
don't laugh.
It's rf
-Original Message-
From: Jim Lux [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 11, 2007 6:09 PM
To: Eric Wachsmann; FlexRadio@flex-radio.biz
Subject: RE: [Flexradio] another (stupid) MIDI question
You gave me the key piece of info..I found midi.cs.. It's back up in
the
I was incorrect in my statement below saying there is only only way to get
band data is via CAT. This is currently true on the FLEX5000 series but the
SDR-1000 can ship band data out via the X2 connector. Thanks to Ray, K9DUR,
for pointing out my error.
Bob K5KDN
-Original Message-
I just ordered the XV144 and XV432 units. I've been
using my FT-847 for satellite and weak-signal work,
but I'm anxious to see how the Flex-5000 works with
some good transverters ahead of it.
Jim KQ6EA
--- Phil LaMarche [EMAIL PROTECTED] wrote:
I too am patiently waiting for my 5000.
From: Jim Lux [mailto:[EMAIL PROTECTED]
Sent: Friday, October 12, 2007 11:52 AM
To: Eric Wachsmann; FlexRadio@flex-radio.biz
Subject: RE: [Flexradio] more midi questions, SysEx, mfr ID
At 07:23 AM 10/12/2007, Eric Wachsmann wrote:
-Original
The world awaits the PowerSDR code to drive FlexWire.
A dearth of FlexWire output devices exist and are waiting to be exploited.
A daughter board for the existing UCB that will accept FlexWire commands
awaits the same PowerSDR code to test and then to drive it.
Phil K3TUF
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Jim Lux
Sent: Friday, October 12, 2007 12:41 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] more midi questions, SysEx, mfr ID
It looks like the long messages (aside from simple
Bob,
You wrote, Currently there is only one way to get band data from either
Flex radio and that is via CAT.
I respectfully disagree. The X2 connector on the SDR-1000 can easily be set
up to give band data. This functionality is missing on the Flex-5000,
however. The world awaits a FlexWire
/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071012/425e292b
missing something simple? Etc.?
73, Ray, K9DUR
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071012/621f7425/attachment.html
___
FlexRadio
Tim,
A voice keyer built into PowerSDR would be nice. However, with many
software packages already available to accomplish the same thing (contesting
software, stand-alone voice keyer software, etc.), it is inevitable that
different users will have their own different ideas about how it should
/flexradio_flex-radio.biz/attachments/20071012/a132bdbe/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz
Since the keying signals generated by a physical device (PTT, key,
etc) come FROM the F5K via midi messages, one could conceivably do
some sort of CW keyer or voice parrot that shoots the signaling into
PowerSDR the same way (is there a virtual midi cable or is it part
of the OS anyway.. midi
At 10:51 AM 10/12/2007, Eric Wachsmann wrote:
[Eric] Apparently this was someones idea of a joke then as I couldn't find
anything related to an Open Source id on any lists. Whatever the case, I
don't think this is a real sticking point. If we need to move it to
something else, we can do it.
I too am patiently waiting for my 5000. Thinking ahead regarding 2 meter
operation. I now have a IC-275H and large beam at 80 ft. Question
Should I wait for the Flex transverter or order an Elecraft transverter.
What do you think?
Phil
Philip LaMarche
LaMarche Enterprises, Inc.
to the thread.
Zack
N8FNR
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments
/20071012/5e6351c7/attachment.html
___
FlexRadio mailing list
Jerry,
Yes, I use N1MM it has a voice keyer built in. BUT, the only way to get
the audio from N1MM into PowerSDR is by porting it out the on-board sound
card cabling it back into the microphone connector. I am suggesting that
we can avoid the extra hardware by using VAC between N1MM (or
Dudley,
Page 36 of the Flex-5000 Operating Manual says that you can select only 1
input channel at a time. That is you can select either Mic or Line In
RCA, but not both.
73, Ray, K9DUR
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
--
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
s/20071012/a132bdbe/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
Is it just a coincedence that the ascii value for A is 41 in hex.
Tom W0IVJ
It looks like the long messages (aside from simple note on/off) are
using a standard SysEx type structure. You've got a manufacturer
code of 00 00 41, which one source gives as Microsoft, but the MMA
says
...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071012/df75762b/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link
I have been jumping into almost all of the SDR related
discussions on eHam with the guns ablazing for 4+ years
now. What I have noted is that there has been a very
noticeable shift in mindset and understanding about the
usefulness and advantages of SDR's in general, and more
specifically the PC
Port Saint Lucie, FL
www.k3pz.com
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment
s/20071012/a132bdbe/attachment.html
___
FlexRadio mailing list
For now, that is true. In the future, we will make it a fully functional
input mixer allowing multiple channels to be mixed.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Ray Andrews, K9DUR
Sent:
-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071012/f4d13bd3/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com
Yeah, a FlexWire device, that sends PWSDR band data commands to my Quadra
Amplifier.
'Build it and they will come'.
Well at least I will.
Could such a device read Quadra power and shut down Flex5K power in case of
wrong antenna/high swr conditions? Sort of a ALC type action?
community as my
knowledge grows.
Kevin
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071012/5d46a500/attachment.html
___
FlexRadio mailing list
The boys want a radio with a knob I say more power to 'em!!! Personally I
want a radio with a brain. I read one comment on how the reason he wanted a
radio with a knob is because his cars used to have carbs, and now that they
don't have carbs he can't modify them. Guess the guy didn't
/pipermail/flexradio_flex-radio.biz/attachments/20071012/5d46a500/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex
Here's the SDR5Ka setup
3.2 gig machine 6 gig of memory
Flex Radio Control panel
Clock Source Internal
Sampling rate 192kHz
Enable WDM Audio is checked
Operation Mode Safe Mode Level 1
Buffer Size in
Samples 1024 (control panel says minimum should be 1152)
but Operating manual says
The 13/Oct Flex Radio Friends TeamSpeak
zipped mp3 (24 minutes) is available at:
http://www.hamsdr.com/dnld.aspx?id=681
or
http://www.hamsdr.com/dnld.aspx
Also available is the same recording, but
with a 50% tempo increase (16 minutes).
http://www.hamsdr.com/dnld.aspx?id=680
Phil
More than likely, something is causing excessive DPCs and/or you have
something else sharing the same IRQ as your Firewire controller.
Download DPCLAT and check to see what the latency is. Anything greater
than 1000uS is too much.
http://www.thesycon.de/dpclat/dpclat.exe
Is that the only thing
Only one a day? recently we got down to (or below!) that level. Sure
is a LOT cheaper than going out and buying each new production version
and trying to unload it later
Jim - W4YXU
Lee A Crocker wrote:
The boys want a radio with a knob I say more power to 'em!!! Personally I
want a
/20071012/6c0a2bd7/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http
51 matches
Mail list logo
