I am sending this to all my contacts. My new e-mail address is
skida...@gmail.com
Please update your contacts if you think you might need to contact me in
the future.
Thanks,
Dave Perry
--
LIMITED TIME SALE - Full Year
Also, the real pa22 Tri-Pacer has a spring rudder interlock with the
ailerons so it can be overridden by the pilot when he wants to have
cross control as in a cross wind.
Dave P.
On 03/09/2012 02:45 PM, Adam Dershowitz, Ph.D., P.E. wrote:
Few, but at least one:
On 03/05/2012 06:40 PM, Gene Buckle wrote:
On Mon, 5 Mar 2012, Gary Neely wrote:
Flying means I need to be able to actually read the instrument, so I often
prefer larger fonts and bolder lines than perhaps the original had.
+1
I'd think that real aircraft engineers would seek to minimize
Hi again,
Thanks for the pointers (should have checked the wiki.flightgear first).
System Description:
newly installed hard drive with fresh f16 install (not upgrade or
preupgrade)
i7 processor with nvidia GF260 XT and proprietary nvidia driver 290.10
fltk and fltk-fluid yum
On 02/20/2012 11:45 AM, Martin Spott wrote:
castle...@comcast.net wrote:
The writeup on the wiki seems a little thin; [...]
that's just because CMake is s easy to use ;-))
Cheers,
Martin.
Thanks to the several people that responded to point me to both git and
cmake
Hi All,
I have been gone for almost a year. I want to start new source trees
for simgear and flightgear and track on going development. Which git
branches should I check out in this new set of directories? And from
the e-mails I have read from the developers list, is appears that fgdata
On 02/19/2012 02:06 PM, Torsten Dreyer wrote:
Am 19.02.2012 21:54, schrieb dave perry:
Hi All,
I have been gone for almost a year. I want to start new source trees
for simgear and flightgear and track on going development. Which git
branches should I check out in this new set
On 10/18/2011 10:24 AM, Cedric Sodhi wrote:
= IMPORTANT NOTICE TO EVERYONE INVOLVED WITH THE DEVELOPMENT OF FGDATA
OR AIRPLANES THEREIN =
Thanks to the concentrated effort of all people involved, most notably
Jorg - who I'd hereby like to thank on behalf of all of us, for spending
three
On 04/08/2011 10:40 PM, Catherine James wrote:
Recently, I've been spending a good bit of time attempting to program all of
my most-used aircraft so that I can engage and disengage the autopilot
through the joystick. I've been able to get this to work on the Seneca II
with a short nasal
On 02/14/2011 11:58 AM, Torsten Dreyer wrote:
On 02/12/2011 12:59 PM, Torsten Dreyer wrote:
By the way. The filtering that will remain in the c172p action-sim.nas
for the nav radio could be moved to navradio.cxx. Here again, the
needle damping and the needle behavior when tuned to an
Hi Guys,
I have a clean local c172p ready to push that includes:
- working nose gear link animation in terms of compression-norm using
xml interpolation
- working main gear animation in terms of compression-norm using xml
interpolation
- moved NAV0 and NAV1 needle deflection filters to
On 02/13/2011 12:43 PM, Stuart Buchanan wrote:
On 13 Feb 2011, at 19:26, dave perry wrote:
Hi Guys,
I have a clean local c172p ready to push that includes:
- working nose gear link animation in terms of compression-norm using
xml interpolation
- working main gear animation in terms
On 02/12/2011 12:59 PM, Torsten Dreyer wrote:
By the way. The filtering that will remain in the c172p action-sim.nas
for the nav radio could be moved to navradio.cxx. Here again, the
needle damping and the needle behavior when tuned to an out-of-range
frequency or when the gs is out of range
I am having trouble getting the modified gearscissors.nas to run with
the stand alone nasal.
after adding the three numbers in gedit and saving the file, I get
$ nasal gearscissors.nas GearScissorInterpolation.xml
Runtime error: undefined symbol
at gearscissors.nas, line 1
If I don't edit
Hi All,
I also have the interpolation for the nose gear scissors done and working.
The main gear rotation interpolation is also done and working. I have been
busy on other projects today, so have not had time to clean this up for
a git push.
The main gear requires a different script based on
On 02/11/2011 10:28 AM, Stuart Buchanan wrote:
On Fri, Feb 11, 2011 at 5:18 PM, Ron Jensen wrote:
On Friday 11 February 2011 10:07:11 Geoff McLane wrote:
Hi Curt,
No probs, now that it seems Ron might have found
something, thus the thread is hovering on closing,
so chat away...
While we
On 01/26/2011 01:31 PM, Anders Gidenstam wrote:
On Tue, 25 Jan 2011, dave perry wrote:
I have tried to load several AC that did not load with filed to load
file name errors. So I did a survey of the entire up-to-date
fgdata. I used an up-to-date fgrun and went through all the AC
I have tried to load several AC that did not load with filed to load
file name errors. So I did a survey of the entire up-to-date
fgdata. I used an up-to-date fgrun and went through all the AC.
The following do not load even to the viewer in fgrun:
737-100, 737-300, AG-14, Airwave Xtreme 150,
With yesterday's git for fgfs and simgear, after about 1.25 hours,
fgfs froze and I had to use System Monitor to end process fgfs.
All seemed normal up to the freeze.
OS, up-to-date FC14 on an I7 desktop with nvidia GeForce GTX 260, NVIDIA
driver Version: 260.19.29.
Command line (from fgrun
On 01/10/2011 02:19 PM, dave perry wrote:
I am ready to push some committed fgdata changes from my *master. But
I lost my notes. Don't want to mess up. What is the syntax? git
push master/origin?
Thanks,
Dave
Never mind. Answer found by git push --help. Sorry, should have done
I am ready to push some committed fgdata changes from my *master. But I
lost my notes. Don't want to mess up. What is the syntax? git push
master/origin?
Thanks,
Dave
--
Gaining the trust of online customers is
On 01/06/2011 03:01 AM, Jari Häkkinen wrote:
find / -name version.h | grep simgear
I had already looked at config.log. The check was against
simgear/version.h. But since --prefix=$FG_ROOT, the config checks
for $FG_ROOT/include/simgear/version.h before it checks for
With today's simgear and flightgear source from git, after compiling and
installing simgear, fgfs
./configure CFLAGS=-march=native CXXFLAGS=-march=native
--prefix=$FG_ROOT
fails with
checking simgear/version.h usability... yes
checking simgear/version.h presence... yes
checking for
Torsten,
I just used an fgfs_update script that updates simgear, then fgfs, and
then fgdata. The compile of fgfs terminated with the following error:
Making install in Environment
make[2]: Entering directory
`/home/dad/source-osg/flightgear/src/Environment'
g++ -DHAVE_CONFIG_H -I.
-devel package). I know there are a couple of
fedora patches applied to simgear, a.o. a patch for the linker.
Stefan
2010/12/9 Brian Schackbschack-flightg...@usa.net:
Dave == dave perry writes:
Dave Hi, I just upgraded to fedora 14. FlightGear builds OK from
Dave yesterday's git
Hi,
I just upgraded to fedora 14. FlightGear builds OK from yesterday's git
with current svn osg and current simgear from git. Also fgrun builds
OK. But I have not been able to build Atlas from yesterday's Atlas
cvs. I get the following link error compiling SimGear-2.0.0 (from a
tar) for
On 12/01/2010 08:14 AM, Gene Buckle wrote:
I like the work that Thorsten has done with the rating system, but you
guys are getting all tangled up in the details.
Why not build a pretty objective score card and then rate the aircraft on
that?
For example, you can have a list like this:
I made changes to pittss1c/Models/sc1.ac from my desktop (i7 with NV GTX
260) that were part of animating main gear flex and wheel spin. These
were pushed and then pulled to my notebook (core duo, NV 9300M).
The left main wheel on the notebook is not textured (all white). To
make sure the
pa24-250 changes
The light cone approach to landing lights has not worked for some time.
I reverted to my original landing light emulation. Is someone working
on light effects?
pitts s1c changes
1. fixed typos in sound.xml
2. changes both wing incidence to 1.5 deg. and the horizontal stab
On 10/07/2010 11:08 AM, Torsten Dreyer wrote:
After 18 minutes sitting on the runway with the altimeter setting
matching the current METAR, the altimeter is still showing 100 ft too
high.
Questions:
Q1: Since there has not been a METAR change, why is interpolation
smoothing necessary at
On 10/04/2010 05:54 PM, Csaba Halász wrote:
On Tue, Oct 5, 2010 at 1:28 AM, dave perryskida...@mindspring.com wrote:
Before I set the altimeter to 30.35 (i.e. as launched at 29.92), the
altimeter reads aprox. 643 and it noticeably drifts down from that
acceptable value.
If I set the
I am not seeing the slowdown. I just ran a simple script that updates
simgear, flightgear source, and fgdata. I would estimate that the git
pull origin run in fgdata took about 3 minutes. This performance has
been typical for me. I ran System Monitor (F12) during the fgdata pull
and the
On 08/01/2010 01:07 PM, dave perry wrote:
Need some help,
I did some clean up of the pa24-250 on my desktop which included
creating a pa24-250/Nasal folder and moving all the nasal files to that
folder. I also created pa24-250-base.xml that contained all the common
lines for the set file
perry wrote:
On 08/01/2010 01:07 PM, dave perry wrote:
Need some help,
I did some clean up of the pa24-250 on my desktop which included
creating a pa24-250/Nasal folder and moving all the nasal files to that
folder. I also created pa24-250-base.xml that contained all the common
lines
On 07/03/2010 02:52 AM, Tim Moore wrote:
On Fri, Jul 2, 2010 at 10:21 PM, dave perry skida...@mindspring.com
mailto:skida...@mindspring.com wrote:
Thanks Tim,
Here's the result:
[...@dave-pc fgdata]$ git push origin master
fatal: protocol error: expected sha/ref, got
.
--'
Do I need authorization to be able to push changes to fgdata?
On 07/02/2010 11:48 AM, Tim Moore wrote:
On Fri, Jul 2, 2010 at 5:43 PM, dave perry skida...@mindspring.com
mailto:skida...@mindspring.com wrote:
I am having syntax issues trying to push changes to the git
On 04/06/2010 06:05 PM, David Megginson wrote:
On Tue, Apr 6, 2010 at 7:34 PM, Peter Brownsmoothwater...@adelphia.net
wrote:
In terms of simplicity, I would like to offer a suggestion of using one (or
more) of the parking positions at airports with (current) parking positions.
If
I get the following error compiling fgfs.
/usr/bin/ld: cannot find -lopenal
But /usr/lib64/libopenal.so.0 = libopenal.so.1 = libopenal.so.1.11.753.
My .bashrc has the line
export
LD_LIBRARY_PATH=/usr/lib:/usr/lib64:/usr/local/lib:/usr/local/lib64:/usr/local/lib/osgPlugins
so I don't see why
On 04/03/2010 11:34 AM, John Denker wrote:
On 04/03/2010 10:21 AM, dave perry wrote:
I get the following error compiling fgfs.
/usr/bin/ld: cannot find -lopenal
But /usr/lib64/libopenal.so.0 = libopenal.so.1 = libopenal.so.1.11.753.
Note that libopenal.so (with no suffix
On 01/31/2010 11:16 PM, Tim Moore wrote:
On Thu, Jan 21, 2010 at 5:45 PM, dave perry skida...@mindspring.com
mailto:skida...@mindspring.com wrote:
Hi,
I just added a pick object to a material animation so it would be
illuminated when cockpit lighting is turned on. This pick
On 01/21/2010 01:12 AM, Gijs de Rooy wrote:
Dave Perry wrote:
I have just submitted the last update from a hit list I started
for the pa24 over the holidays.
Very nice updates! One small thing seems to be missing though, the
payload does not change
when baggage is loaded. ;)
Yeah, I
Hi,
I just added a pick object to a material animation so it would be
illuminated when cockpit lighting is turned on. This pick object was
highlighted as expected via ctrl-C before adding it to the material
animation, but now even with the cockpit lighting off, the pick
highlight no longer
On 01/21/2010 06:35 AM, Torsten Dreyer wrote:
On 01/21/2010 01:12 AM, Gijs de Rooy wrote:
Dave Perry wrote:
I have just submitted the last update from a hit list I started
for the pa24 over the holidays.
Very nice updates! One small thing seems to be missing though
Hi All,
I have just submitted the last update from a hit list I started for
the pa24 over the holidays.
Updates:
* full 3D interior including animated cabin door, animated visors,
arm rests.
* animated baggage compartment door with baggage loaded and removed
by menu.
*
Hi,
Does anyone object to graying out the autopilot menu for tw additional
autopilots used by several aircraft?
If not, would someone with commit authority please apply the following
simple patch?
Index: gui.nas
===
RCS file:
Hi,
I have searched both the c172p and SenecaII folder for autopilot or
gui or just menu and I can not find how these AC gray out the
autopilot menu. What's the secret?
Dave P.
--
This SF.Net email is sponsored by
On 12/18/2009 02:53 PM, John Denker wrote:
More generally: Limiting the GS service volume to 10nm
or thereabouts is a significant departure (if you'll
pardon the expression) from previous FGFS behavior, but
it is not wrong. It is a feature, not a bug.
Agreed. I often do the ILS rwy
I just noticed that the patch to animate the c172p nose gear strut
scissors that I sent to James Turner to commit also picked up a local
change I made to decrease the p_factor.
RCS file: /var/cvs/FlightGear-0.9/data/Aircraft/c172p/c172p.xml,v
retrieving revision 1.24
diff -u -p -r1.24 c172p.xml
I am getting the following error compiling fgfs from cvs today on two
different systems.
$ make
Making all in tests
make[1]: Entering directory `/home/dad/source-osg/source-fgfs/tests'
make[1]: *** No rule to make target `est-epsilon.c', needed by
`est-epsilon.o'. Stop.
make[1]: Leaving
On 12/01/2009 11:38 AM, John Denker wrote:
On 12/01/2009 11:19 AM, Heiko Schulz wrote:
To your note: So the c172p has now:
-struts animation
The reported bug
http://www.av8n.com/fly/fgfs/htm/bug-list.htm#bug-x1768
concerns the nutcracker, which as of 1 Dec 2009 looks
On 12/01/2009 12:47 PM, Stuart Buchanan wrote:
Hi John,
Thanks for the list. A number of the c172p issues are on my to-do list (I've
indicated relative priorities - let me know if you think they are wrong), and
others should have been fixed recently.
I've put some comments inline, along
Hi Erik,
For any Fedora users, I recommend preupgrade to FC12. All the fgfs
sounds work and are crystal clear, no crackle! This includes ATC, ATIS,
vor and loc ident, marker beacons, cockpit sounds (switch clicks, flaps,
etc.).
I encountered several potential gotchas:
1. If you have an
On 11/30/2009 09:44 AM, dave perry wrote:
Hi Erik,
For any Fedora users, I recommend preupgrade to FC12. All the fgfs
sounds work and are crystal clear, no crackle! This includes ATC, ATIS,
vor and loc ident, marker beacons, cockpit sounds (switch clicks, flaps,
etc.).
I encountered
:
On Sat, Nov 28, 2009 at 8:31 PM, dave perry wrote:
Hi,
I used the preupgrade to FC12 from FC10 this Saturday on my ASUS
notebook (Intel core2 duo). This installed
openal-soft-1.10.622-2
openal-soft-devel-1.10.622-2 and
pulseaudio-0.9.21-1
I had to use
Problem fixed. Great sound including vor and loc idents. The problem
was FC10 rpms that did not get removed. alsa-plugins-pulseaudio were
the issue.
Sorry for the noise.
dave perry wrote:
Update on symptoms:
I went back to osg-2.8.2, updated SimGear, fgfs, and data from cvs.
Recall
Hi,
I used the preupgrade to FC12 from FC10 this Saturday on my ASUS
notebook (Intel core2 duo). This installed
openal-soft-1.10.622-2
openal-soft-devel-1.10.622-2 and
pulseaudio-0.9.21-1
I had to use OpenSceneGraph-2.9.5 as the svn up for osg broke fgfs link.
With the above I either get
Erik Hofman wrote:
dave perry wrote:
Before the recent updates, both had normal cockpit sound but no marker
beacon or nav ident sounds as well as working Doppler in fly-by view.
Just to be sure: did it have proper Doppler (reading the previous line
might say just the opposite
Erik Hofman wrote:
dave perry wrote:
Yes, Doppler was working before the cvs update.
[...@dadsoffice bin]$ ./al-info
AL_VENDOR = OpenAL Community
AL_RENDERER = Software
Alright, the same version as Georg; then it should be fixed in CVS.
Erik
Hi Erik,
I have two systems running fgfs.
(1) AMD Athlon XP 3200+ with-up to-date FC10
(pulseaudio-0.9.14-3.fc10.i386)
(2) Intel Core 2 duo with-up to-date x86_64 FC10
(pulseaudio-0.9.14-3.fc19.x86_64)
Before the recent updates, both had normal cockpit sound but no marker
beacon or nav
Hi Victhor,
I tried yum erase pulseaudio which also removed the plugins that depend
on pulseaudio, and the sound problems are the same.
Victhor Foster wrote:
Uninstall PulseAudio. I used to have those problems and they're gone
after I removed it.
2009/11/25 Heiko Schulz aeitsch...@yahoo.de:
Thanks Stefan,
I plan to after Thanksgiving and before Christmas. I need both the
32bit and 64 bit DVDs, so two long downloads.
Dave P.
stefan riemens wrote:
Alternatively, upgrade to something newer. I have found PulseAudio has
much improved since f10. (I'm a long-time fedora user myself
Ron Jensen wrote:
The relationship between feet and meters is exactly 0.3048 feet per
meter. Your conversion value of 12/39.4 is approximately 0.30456... It
would be better to do:
# constants
...
var radTOdeg = 57.295779;
var ftTOmeter = 0.3048;
...
# Right main
var
Heiko Schulz wrote:
Hello.
First thanks for comitting the changes to the c172p.
For all, I don't see me as main author, just as another one beside the
already known, just made a new 3d-model and 3d-panel.
So thanks for Dave Perry as another contributer for the instruments-lights!
I see
Geoff McLane wrote:
On Thu, 2009-11-19 at 00:18 +1100, George Patterson wrote:
2009/11/17 Diego Fernando Rodríguez Varón diegorodrigu...@gmail.com:
Hello everyone.
I was experiencing the segmentation fault reported by Nicolas before so I
just tried updating and compiling. But I
Heiko Schulz wrote:
The Model-Author of the c172p has this on his list, but did not find any time
to change this...
Hi Heiko (and anyone who is maintaining the c172P),
Several questions:
First, who is the Model-Author for the c172p? A search of the c172
folder only yields David
Heiko Schulz wrote:
Hello Dave,
I did the the 3d-model incl. the 3d-panel, but there was still a lot of
issues.
All other things (fdm, wrapping xml's, 2d-panels etc) I left untouched.
Hi Heiko (and anyone who is maintaining the c172P),
Several questions:
First, who is the
Hi All,
Presently, the gs deflection retains it's final value when the nav
frequency is changed to a station that has no glide slope or when the gs
goes out of range. I had been using the select animation to overcome
this, but that does not allow using a nasal filter to smoothly park the
gs
Erik Hofman wrote:
Scott Hamilton wrote:
On Thu, 2009-10-29 at 13:57 +0100, Erik Hofman wrote:
Hi ya Erik,
I just tried out the test3, no sound what so ever...
I've committed the current state of my local code to see if it fixes
anything.
Erik
Hi Erik,
Updated
Tim Moore wrote:
On 10/27/2009 01:49 PM, dave perry wrote:
Tim Moore wrote:
On 10/17/2009 07:42 PM, Ron Jensen wrote:
On Sat, 2009-10-17 at 11:24 -0600, dave perry wrote:
With current cvs update on my notebook, I am not getting the correct
field
Tim Moore wrote:
On 10/17/2009 07:42 PM, Ron Jensen wrote:
On Sat, 2009-10-17 at 11:24 -0600, dave perry wrote:
With current cvs update on my notebook, I am not getting the correct
field elevation when I set the altimeter to match the real weather
altimeter setting. It is off
.i386
freealut-1.1.0-6.fc9.i386
FC10 up to date
Alan Teeder wrote:
I had no sound yesterday evening – but this was an aircraft that I am
working on (JSBSim) and didn’t investigate why this should be suddenly so.
As with Dave Perry I have an Athlon 32 bit machine
Erik Hofman wrote:
It would be nice to know who of you who have problems run on 64-bit and
if any one with these problems (sounds not playing) actually runs in 32-bit.
Erik
--
Come build with us! The BlackBerry(R)
dave perry wrote:
Erik Hofman wrote:
It would be nice to know who of you who have problems run on 64-bit and
if any one with these problems (sounds not playing) actually runs in 32-bit.
Erik
--
Come build
Erik Hofman wrote:
dave perry wrote:
dave perry wrote:
With an update this morning from cvs, I still only hear ATC and that
with frequency distortion. Did I miss a required library change? I
have openal-0.0.9-0.15.20060204cvs.fc9.i386 and
freealut-1.1.0-6.fc9.i386 with fc10
James Sleeman wrote:
On 20/10/09 00:07, James Sleeman wrote:
On 19/10/09 23:42, Erik Hofman wrote:
Ok I think I've ironed out most of the bugs. I hope also the one that
James reported but I don't hold my breath for it just yet.
So far so good, compiles and runs, and produces
dave perry wrote:
With an update this morning from cvs, I still only hear ATC and that
with frequency distortion. Did I miss a required library change? I
have openal-0.0.9-0.15.20060204cvs.fc9.i386 and
freealut-1.1.0-6.fc9.i386 with fc10.
The above is on my desktop (Athlon XP 3200
syd adams wrote:
This works for me ...
./configure CFLAGS= -march=athlon CXXFLAGS=-march=athlon
--with-jpeg-factory
... once I remembered to do a make clean before make :)
Thanks Syd,
The make clean turned out to be the problem.
This works for me ...
./configure CFLAGS=-march=native
Anders Gidenstam wrote:
On Sat, 10 Oct 2009, dave perry wrote:
I have --build=i686 as a switch to configure. Where do I supply -march=?
You set CXXFLAGS and CFLAGS (but the latter might not be needed). My
configure line starts with:
configure CFLAGS=-O2 -g -march=core2 -mfpmath
With current cvs update on my notebook, I am not getting the correct
field elevation when I set the altimeter to match the real weather
altimeter setting. It is off by 160 feet today at KLMO (field elevation
5052). With my desktop which was last updated from cvs about 10/3, it
is very nearly
With today's SimGear CVS, I am getting the following compile error
Making all in props
make[3]: Entering directory `/home/dad/source-osg/SimGear/simgear/props'
g++ -g -O2 -D_REENTRANT -lOpenThreads -o props_test props_test.o
libsgprops.a ../../simgear/xml/libsgxml.a
James Turner wrote:
On 15 Sep 2009, at 22:59, Thomas Betka wrote:
But each LOC
on an airfield has it's own frequency
This is where the problems start:
http://www.nats-uk.ead-it.com/aip/current/ad/EGPH/EG_AD_2_EGPH_2-1_en.pdf
IVG and ITH share the same frequency - 108.9Mhz, and
James Turner wrote:
It adds false LOC and GS signals, a better GS deviation computation,
and LOC sensitivity based on the runway dimensions. The last part I'm
not totally sure about - it makes localizers *very* sensitive - maybe
I've adapted the code incorrectly, but this doc:
James Turner wrote:
On 9 Sep 2009, at 03:01, dave perry wrote:
Sorry, I misunderstood you concerning the animation edits. I will be
glad to help with the xml edits and testing. Getting rid of the
spurious 5x for the glide scope and adding the clamps is a good idea
and
adding
James Turner wrote:
- secondly, I'm changing (or will) the glideslope deviation to be
'correct' degrees: [-0.7 .. 0.7], i.e removing the spurious 5x scalar
that has somehow crept in, and fixing many clients which assumed the
range was [-10 .. 10], or something else again. This is in
Hi James,
Your note below caused me to ask if the LOC needle deflection is scaled
differently than the VOR needle deflection in navradio.cxx. It is and
the comment that it is 4x more sensitive is correct according to notes
from Instrument Ground School. From a pilot point of view, what we
James Turner wrote:
- fourthly, and most importantly, I'm not doing a blanket edit - I
wish I could! I'm going to have to go through each aircraft, make the
changes, and then test that aircraft. I'm sure I'l miss some things,
but I still believe it's worth it to kill off the dreaded 5x
James Turner wrote:
On 6 Sep 2009, at 22:50, dave perry wrote:
The height is correct. It looks like every other call of
FGNavRadio::updateWithPower gets the wrong value for nav_elev. Hope
this helps find the bug.
I was wrong about the height being correct. Thought it might
I updated SimGear, fgfs source and data yesterday for both my desktop
and notebook. The glide slope is now broken. The angle seems correct
but it now acts as if the ILS is always from 0 ft MSL. I tried the rw
23 ILS at KBTL with field elevation of 952 ft, rw 23 at KBJC with field
elevation
Hi all,
One of the two co-owners with me of the real N7764P (pa24-250) had the
connector of one of the oil cooler hoses break just before entering the
pattern at KLMO, where we hangar. We check the oil in preflight to 9
quarts and he had just under 6 quarts at shut down. The left side and
Erik Hofman wrote:
I wrote:
Ahh, that line should read:
float n=0.06 + dot(nvL, a);
instead of:
float n=0.06 + dot(nvL[0], a);
Which brings the frame rate back to what it was :-/
Maybe it might be a good idea to specify which of the effects you want
to turn on or not?
Torsten Dreyer wrote:
Just commited a hack for envrionment_ctrl.cxx.
It now waits for the first METAR to arrive before proceeding with the
initialization sequence. This prevents the nasal-dir-initialized signal being
fired before a METAR has arrived.
I more and more like the idea of
Tim Moore wrote:
dave perry wrote:
I am getting segmentation fault after updating osg trunk from svn,
SimGear from cvs, and fgfs source from cvs. I also tried compiling
against osg-2.8.2-rc4. I still get a segmentation fault right after
loading aircraft completes.
Can you
Tim Moore wrote:
Mathias Fröhlich wrote:
Hi,
With yesterdays checkin from Tim we need a more or less recent osg version
to
build flightgear. Tim promised to provide come conditional code to work
around
that.
But I would suggest to just have a somehow recent osg version as a
(/engines/engine[0]/egt-degf-fix, egt_lowpass.filter(egt));
I ignore the YASim value for egt.
Regards,
Dave Perry
--
Enter the BlackBerry Developer Challenge
This is your chance to win up to $100,000 in prizes! For a limited
Torsten Dreyer wrote:
I just updated SimGear, fgfs source, and data from cvs on my FC10
notebook. The Century IIB, Century III, and Altimatic autopilot hot
spots don't show with ctrl-C and they don't work. I checked to see if
any of their files in Aircraft/Instruments-3D/ had been changed.
I just updated SimGear, fgfs source, and data from cvs on my FC10
notebook. The Century IIB, Century III, and Altimatic autopilot hot
spots don't show with ctrl-C and they don't work. I checked to see if
any of their files in Aircraft/Instruments-3D/ had been changed. They
had not. So I am
Heiko Schulz wrote:
I think the pa24-250 is another user of this. Does this aircrafts
also cause this NaN-errors?
Hi Heiko,
The pa24-250 uses Aircraft/Instruments-3d/comp/comp.xml.
Regards,
Dave P.
--
Crystal
I am trying to build cvs fgfs on a new notebook running Fedora10
x86_64. I am getting a configure error w/o --build specified. What
should I specifiy for --build=?.
The processors - Intel(R) Core(tm)2 Duo processor T5800.
- Dave P.
dave perry wrote:
I am trying to build cvs fgfs on a new notebook running Fedora10
x86_64. I am getting a configure error w/o --build specified. What
should I specifiy for --build=?.
The processors - Intel(R) Core(tm)2 Duo processor T5800.
- Dave P
Csaba Halász wrote:
On Tue, Jan 27, 2009 at 7:10 PM, dave perry skida...@mindspring.com wrote:
Sorry, I did not say in the body of the note that the configure error
occurs when building SimGear.
configure should be able to figure out --build by itself. Look into
config.log
1 - 100 of 272 matches
Mail list logo