orized
> review, use, disclosure or distribution is prohibited. If you are not
> an intended recipient, please contact the sender and destroy all
> copies of the original message.
>
> *From:*framers-boun...@lists.frameusers.com
> [mailto:framers-boun...@lists.frameusers.com] *On Behalf
requiring network access to
get to the data files, then it should not be any issue.
Regards,
Z
From: Ken Poshedly [mailto:poshe...@bellsouth.net]
Sent: Wednesday, February 13, 2013 11:34 AM
To: Syed Zaeem Hosain (syed.hos...@aeris.net); Fred Ridder;
rob...@lauriston.com; framers@lists.frameusers.com
I think that there may be some confusion about local vs. network
folders/drives. Perhaps I read too much into Ken's responses from the Adobe
tech!
In my case, all application executables are on my drive C and the data files
are on drive E on the _same_ system. I.e., drive E is _not_ a network-m
Ah! That is a bit different from I how I understood your original post then ?
when the data files are on a remote network, things have been known to go awry.
However, as long as the data files are on another drive on the _same_ system (I
have two drives in my laptop for example), without requiri
On Wed, Feb 13, 2013 at 8:55 AM, Ken Poshedly
mailto:poshe...@bellsouth.net>> wrote:
> I just learned from Adobe tech support (via phone call) that the permissions
> in
> FrameMaker 11.0 have been modified so that the data files should also be on
> the
> same hard drive where FM 11.0 is installe
On Wed, Feb 13, 2013 at 8:55 AM, Ken Poshedly mailto:poshedly at bellsouth.net>> wrote:
> I just learned from Adobe tech support (via phone call) that the permissions
> in
> FrameMaker 11.0 have been modified so that the data files should also be on
> the
> same hard drive where FM 11.0 is instal
Hi, Pat.
(I am replying to the list, since my comments are not for your specific
problem, but more general.)
In addition to the other good suggestions I saw, the only other thing to point
out is that I hope you have a backup of the Word file(s) from before you
started editing - it could save r
Hi, Pat.
(I am replying to the list, since my comments are not for your specific
problem, but more general.)
In addition to the other good suggestions I saw, the only other thing to point
out is that I hope you have a backup of the Word file(s) from before you
started editing - it could save r
Hi, Robert.
There may well be _some_ readable text inside a PDF file, but the file is
binary for sure - most of it will be unreadable in that regard.
If you edit a PDF file with a standard ASCII text editor and save the file, it
_may_ get quite corrupted (for example, if the editor adds life fe
Hi, Robert.
There may well be _some_ readable text inside a PDF file, but the file is
binary for sure - most of it will be unreadable in that regard.
If you edit a PDF file with a standard ASCII text editor and save the file, it
_may_ get quite corrupted (for example, if the editor adds life fe
Thanks for that link, Mike. I will take a look at that site.
Although I hazard a guess that this would get me the same info in the new
formats, but not really deal, of course, with font corrections/tweaks that the
Adobe Designer might have made, or Unicode additions, etc.
Z
> I, too, wish ther
Thanks for that link, Mike. I will take a look at that site.
Although I hazard a guess that this would get me the same info in the new
formats, but not really deal, of course, with font corrections/tweaks that the
Adobe Designer might have made, or Unicode additions, etc.
Z
> I, too, wish ther
Hi, all (particularly Dov Isaacs, as I seem to remember that you know a lot
about Adobe fonts).
Over the years, I bought a number of fonts from Adobe (some of them were quite
expensive too) for use with FrameMaker. Of course, since these were all
purchased _more_ than a decade ago, they are all
Hi, all (particularly Dov Isaacs, as I seem to remember that you know a lot
about Adobe fonts).
Over the years, I bought a number of fonts from Adobe (some of them were quite
expensive too) for use with FrameMaker. Of course, since these were all
purchased _more_ than a decade ago, they are all
might you recommend calling to instruct me in set-up of this
environment, or where is this kind of set-up defined. ???
thanks very much for your response!!!
best to all,
dick doll
317.539.4857
sgmli...@tds.net
___
You are currently subscribed to
Hi, Richard.
I have a dual LCD monitor setup and it works _very_ well for this purpose. At
work, I use a Lenovo laptop with a docking station, connected to two 24" Dell
2407 LCD monitors. Both with DVI connections running at 1920 x 1200 resolution
each - in my older laptop setup, I had one DVI
Ø Thanks for pointing me to the file properties. I'm a Mac person, there is
much in Windows I don't know. :-) The files are now identified as Frame 11
files (not Frame 9), and in the properties they are set to open with Frame 11.
Actually, it is not part of the files themselves ... it is a sett
? Thanks for pointing me to the file properties. I'm a Mac person, there is
much in Windows I don't know. :-) The files are now identified as Frame 11
files (not Frame 9), and in the properties they are set to open with Frame 11.
Actually, it is not part of the files themselves ... it is a sett
Hi, all.
This question is a bit off-topic, but I would like to get your opinions too! I
am using Windows 7 Pro 64-bit with latest versions of FrameMaker 11 and Acrobat
XI, of course.
For some of my recent font purchases, I received both OpenType and TrueType
format files. I.e., the font came i
Hi, all.
This question is a bit off-topic, but I would like to get your opinions too! I
am using Windows 7 Pro 64-bit with latest versions of FrameMaker 11 and Acrobat
XI, of course.
For some of my recent font purchases, I received both OpenType and TrueType
format files. I.e., the font came i
hysics.com
___
You are currently subscribed to framers as syed.hos...@aeris.net.
Send list messages to framers@lists.frameusers.com.
To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/syed.hosain%40aeris
I also use (and like) the various Xara products ... far more cost-effective
than Adobe equivalents, although the yearly (or so it seems) upgrade prices
leave a bit to be desired.
Z
-Original Message-
From: framers-bounces at lists.frameusers.com
[mailto:framers-boun...@lists.frameuser
> That was the Sarah O'Keefe book I was thinking of when I mistakenly posted
> the link to Unstructured Framemaker 11.
Okay, but I appreciate that link post too! :) Gave me information about
something to look forward to ... so, thanks much for it!
Z
> That was the Sarah O'Keefe book I was thinking of when I mistakenly posted
> the link to Unstructured Framemaker 11.
Okay, but I appreciate that link post too! :) Gave me information about
something to look forward to ... so, thanks much for it!
Z
sales would
not justify the work.
So, that was my reason for piling on to your comment, i.e. my plug/hint/prod to
release the old book - perhaps in a PDF-only version? - particularly if there
is no version 11 planned.
Z
On Mon, Dec 3, 2012 at 8:22 PM, Syed Zaeem Hosain
(syed.hos...@aeris.net) w
> My bad. Is the most recent book on structured publishing with FrameMaker
> actually "Structured Publishing from the Desktop: Frame Technology's
> Framemaker," published in 1992?
I am not sure, to be honest. I have not looked for those older books.
I like the Scriptorium _Unstructured_ FrameMa
Robert Lauriston wrote:
> Ready, shoot, aim!
>
> Scriptorium's updating their book for FM11 but they're not done yet.
>
> http://www.scriptorium.com/books/unstructured-framemaker-11/
Good!
I'd also love to see their _unreleased_ Structured FrameMaker 8 ... ideally
updated for FrameMaker 11, bu
Robert Lauriston wrote:
> Ready, shoot, aim!
>
> Scriptorium's updating their book for FM11 but they're not done yet.
>
> http://www.scriptorium.com/books/unstructured-framemaker-11/
Good!
I'd also love to see their _unreleased_ Structured FrameMaker 8 ... ideally
updated for FrameMaker 11, bu
ailman/options/framers/pxenson%40gmail.co
> m
>
> Send administrative questions to listad...@frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
___
You are currently subscribed to framers as syed.hos...@aeris.net.
Send
Unfortunately, no.
Z
-Original Message-
From: framers-bounces at lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Pat Christenson
Sent: Thursday, November 15, 2012 9:50 AM
To: framers at lists.frameusers.com
Subject: Re: Wildcards not working as expected: d
Craig Ede wrote:
> Ah, Windows. I can remember running FrameMaker on a SUN workstation that
> hadn't been rebooted for months and never having a problem. At the same time
> I would be rebooting Windows a least twice daily. Now I always restart
> Windows machines before leaving for the day.
Ye
Craig Ede wrote:
> Ah, Windows. I can remember running FrameMaker on a SUN workstation that
> hadn't been rebooted for months and never having a problem. At the same time
> I would be rebooting Windows a least twice daily. Now I always restart
> Windows machines before leaving for the day.
Ye
d [mailto:richard.co...@polycom.com]
Sent: Thursday, October 18, 2012 9:16 PM
To: Syed Zaeem Hosain (syed.hos...@aeris.net); Harpreet Singh Seehra; Robert
Lauriston; framers@lists.frameusers.com
Subject: RE: Collaborate with PDF-based roundtrip reviews?
Syed Zaeem Hosain wrote:
> Aren't
Interesting ... thanks for the response, Richard!
And I don't know about all of you all, but I strongly, *strongly* want any such
"special plumbing" to be functional in the standalone purchased versions of
FrameMaker and Acrobat Pro. (I simply don't want to get onto the much more
costly TCS pur
Harpreet Singh Seehra wrote:
> This is only possible if you have Tech Comm Suite,Standalone Frame cannot do
> that.
Really? WHY is this?
Aren't the features/capabilities of FrameMaker and Acrobat Pro as stand-alone
products not *exactly* the same as they are in TCS? Isn't TCS simply a
packaged
Harpreet Singh Seehra wrote:
> This is only possible if you have Tech Comm Suite,Standalone Frame cannot do
> that.
Really? WHY is this?
Aren't the features/capabilities of FrameMaker and Acrobat Pro as stand-alone
products not *exactly* the same as they are in TCS? Isn't TCS simply a
packaged
site too ... so I will just use that instead of IE with the site
till I figure out what settings I need to check on Chrome.
Z
From: Rick Quatro [mailto:r...@rickquatro.com]
Sent: Thursday, October 04, 2012 10:52 AM
To: Syed Zaeem Hosain (syed.hos...@aeris.net); 'Kapil Verma'
Thanks, Rick!
It may be my protection settings on Chrome for executing Javascript - it looks
like all the buttons and many links on the Adobe site are not just HTML or
simple page hyperlinks anymore.
Also, based on information sent to me in a private e-mail, I can use Firefox
with the Adobe si
For some reason, much of the Adobe web site is not working well for me from
Chrome. Like the link below, I can get to it easily, but then clicking on the
Download button does nothing - I had to fire up Internet Explorer to make the
button do anything.
Pull-down menus work fine (whether from the
For some reason, much of the Adobe web site is not working well for me from
Chrome. Like the link below, I can get to it easily, but then clicking on the
Download button does nothing - I had to fire up Internet Explorer to make the
button do anything.
Pull-down menus work fine (whether from the
Cool link ... thanks for the info, Scott!
Based on this, it looks like I started using FrameMaker with version 1.0, since
the first server copy I bought was for a Sun 3/50 monochrome system back in
mid-1988 or so. Now that I see it, I think I remember the upgrade to version
1.3 ... but could ha
Cool link ... thanks for the info, Scott!
Based on this, it looks like I started using FrameMaker with version 1.0, since
the first server copy I bought was for a Sun 3/50 monochrome system back in
mid-1988 or so. Now that I see it, I think I remember the upgrade to version
1.3 ... but could ha
g for).
Separately, I have to admit I also don't recall the 7.1 version at all. I guess
my old age is creeping up on me more than I thought!
Z
From: Fred Ridder [mailto:docu...@hotmail.com]
Sent: Tuesday, October 02, 2012 8:08 AM
To: Syed Zaeem Hosain (syed.hos...@aeris.net); neat_g...@yahoo
Yes, I definitely erred on the 5.6 version ... it was 5.5.6 for sure now that
both you and Richard mention it.
I don't remember the 5.1 (or 5.1.2?) version at all - like I mentioned in
another response, I may not have been using FrameMaker at that time (due to the
company I was working for).
S
-
From: Combs, Richard [mailto:richard.co...@polycom.com]
Sent: Tuesday, October 02, 2012 7:22 AM
To: Syed Zaeem Hosain (syed.hos...@aeris.net); Peter Courlis; Shelly Schneider;
framers@lists.frameusers.com
Subject: RE: Buying an old copy of FrameMaker
Syed Zaeem Hosain wrote:
> The Win
Oops, yes. I spaced out about the 5.5.6 (not 5.6) ... I don't remember the 5.1
version at all though - might have been a period when I had stopped using
FrameMaker for a while (had beta-tested the 5.0 version for Frame Technology),
so I don't have that disk.
Z
-Original Message-
From:
There isn’t any FM 8.2 that I know of.
The Windows versions that I used/upgraded-to were (early numbering may be
incorrect, but everything after 7.0 is correct):
5.0, 5.5, 5.6, 6.0, 7.0, 7.2, 8.0, 9.0, 10.0, and 11.0
With a varying number of available patches for each.
Also, I am not counting
There isn?t any FM 8.2 that I know of.
The Windows versions that I used/upgraded-to were (early numbering may be
incorrect, but everything after 7.0 is correct):
5.0, 5.5, 5.6, 6.0, 7.0, 7.2, 8.0, 9.0, 10.0, and 11.0
With a varying number of available patches for each.
Also, I am not counting
Thanks, Chris!
Based on what I see already, I think I will find the SafetyMIF tool quite
useful, I believe!
Separate question: I have a version of a document that describes your CUDspan
tools, but do not see it on your web site. Is there an updated version that you
could provide?
Thanks again
Thanks, Chris!
Based on what I see already, I think I will find the SafetyMIF tool quite
useful, I believe!
Separate question: I have a version of a document that describes your CUDspan
tools, but do not see it on your web site. Is there an updated version that you
could provide?
Thanks again
Same here ... no issues whatsoever.
Z
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Jim Owens
Sent: Thursday, September 27, 2012 4:48 PM
To: Robert Lauriston
Cc: framers@lists.frameusers.com
Subject: Re: Response
Same here ... no issues whatsoever.
Z
-Original Message-
From: framers-bounces at lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Jim Owens
Sent: Thursday, September 27, 2012 4:48 PM
To: Robert Lauriston
Cc: framers at lists.frameusers.com
Subject: Re: Res
(Just got this e-mail ... don't know what the hangup was on the list
distribution. So, I don't know if it will be "in time".)
Hi, Amy,
We use Subversion for our development teams. To verion control code, etc.
However, recently, we also began storing our _other_ files on Central Desktop
(www.ce
(Just got this e-mail ... don't know what the hangup was on the list
distribution. So, I don't know if it will be "in time".)
Hi, Amy,
We use Subversion for our development teams. To verion control code, etc.
However, recently, we also began storing our _other_ files on Central Desktop
(www.ce
(syed.hos...@aeris.net); Combs, Richard;
framers@lists.frameusers.com
Subject: RE: Patent Listing
I'd certainly like to your PP presentation.
Obviously I'm starting (almost) from ground zero here.
Alison
-Original Message-
From: Syed Zaeem Hosain (syed.hos...
Noted. So far, I have a few requests for it ...
I will get back to those who have asked, once I have some feedback from our
lawyers ... :)
Regards,
Z
-Original Message-
From: Alison Craig [mailto:alison.cr...@ultrasonix.com]
Sent: Friday, August 24, 2012 9:50 AM
To: Syed Zaeem Hosain
to see if I
can "freely" send it out.
I guess I am trying to gauge the level of interest here first ... :)
Z
-Original Message-
From: Combs, Richard [mailto:richard.co...@polycom.com]
Sent: Thursday, August 23, 2012 7:22 PM
To: Syed Zaeem Hosain (syed.hos...@aeris.net); Al
I have a Powerpoint presentation on the topic of Intellectual Property (i.e.,
Trademarks and Patents - among other things) and can provide this to people.
BUT, I want to look through it first to sanitize it a bit (to remove some
company-specific material) and also check with our patent lawyers t
can guide
you? These aren't things you should just make up.
Richard G. Combs
Senior Technical Writer
Polycom, Inc.
richard.co...@polycom.com
303-223-5111
--
rgco...@gmail.com
303-903-6372
--
___
You are currently subscribed to framers as
I *entirely* agree with the public use of trademark and logo attributions - the
specific method, design, figure, wording, etc., is driven by the company who
owns them. These are often described in *public* documents by those companies
(see Oracle, Google and Microsoft web sites for examples).
H
Hi, Alison.
In my position, I deal with patents quite a bit - have a few that I am on the
inventor list. :) Which doesn't mean that I am an expert, but I interact with
our patent attorneys a lot and I set some internal policy.
The main point I would make is that the fact that a third-party has
Hi, Alison.
In my position, I deal with patents quite a bit - have a few that I am on the
inventor list. :) Which doesn't mean that I am an expert, but I interact with
our patent attorneys a lot and I set some internal policy.
The main point I would make is that the fact that a third-party has
2:05 PM
To: Syed Zaeem Hosain (syed.hos...@aeris.net)
Cc: framers@lists.frameusers.com
Subject: RE: FM-11 released version
Hello,
Latest version of Framemaker 11 is FM 11.0.0.380
Thanks,
Vikram
From:
framers-boun...@lists.frameusers.com<mailto:framers-boun...@lists.frameusers.com>
[mai
Um ... Yes ... that is what I see in my installed (as released) version too. :)
But I think the original question was "is this the same version as the last
beta build?". That I do not know the answer to.
Z
From: TCS Support [mailto:tcs...@adobe.com]
Sent: Tuesday, August 07, 2012 12:05 PM
To:
My installed version of FM 11 downloaded a few days ago shows it as Version
11.0.0.380 ...
But, since I was not on the beta program, I cannot confirm whether this was the
same as the last beta build.
Z
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On
My installed version of FM 11 downloaded a few days ago shows it as Version
11.0.0.380 ...
But, since I was not on the beta program, I cannot confirm whether this was the
same as the last beta build.
Z
From: framers-bounces at lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com]
Hi, Linda.
I received an e-mail notification for my FrameMaker 11 upgrade to be downloaded
... a few days ago, but I was traveling till yesterday (Sat) and decided to
wait to download till I get back to the office tomorrow (high-speed connection).
Z
From: framers-boun...@lists.frameusers.com
Hi, Linda.
I received an e-mail notification for my FrameMaker 11 upgrade to be downloaded
... a few days ago, but I was traveling till yesterday (Sat) and decided to
wait to download till I get back to the office tomorrow (high-speed connection).
Z
From: framers-bounces at lists.frameusers.co
Most excellent news. Thanks for the update!
Z
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Ken Poshedly
Sent: Monday, June 25, 2012 4:48 PM
To: FrameMaker Users List
Subject: Re: OT: Unexpected event
To all,
Rick e-mailed me on Monday tha
Most excellent news. Thanks for the update!
Z
From: framers-bounces at lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Ken Poshedly
Sent: Monday, June 25, 2012 4:48 PM
To: FrameMaker Users List
Subject: Re: OT: Unexpected event
To all,
Rick e-mailed me on Monday
Hi, Steve.
Fred's method works well and I use it when the number of changes are relatively
low.
However, for large numbers of changes, your method of editing the MIF file is
what has worked best (and usually quickest) for me - it has the side benefit of
providing a "MIF Flush" that can clean u
Hi, Steve.
Fred's method works well and I use it when the number of changes are relatively
low.
However, for large numbers of changes, your method of editing the MIF file is
what has worked best (and usually quickest) for me - it has the side benefit of
providing a "MIF Flush" that can clean u
Stuart Rogers said:
> You could give this a try:
> http://www.belarc.com/free_download.html
> It correctly reported my TCS 3.5 licence.
> HTH,
*Very* cool comprehensive! It _correctly_ reported all the license numbers on
my system for Adobe products - I verified some of them and they are indee
Stuart Rogers said:
> You could give this a try:
> http://www.belarc.com/free_download.html
> It correctly reported my TCS 3.5 licence.
> HTH,
*Very* cool comprehensive! It _correctly_ reported all the license numbers on
my system for Adobe products - I verified some of them and they are indee
people
that I work with is an important part of making my work so satisfying.
Sincerely,
Rick
Rick Quatro
Carmen Publishing Inc.
585-283-5045
r...@frameexpert.com
___
You are currently subscribed to framers as syed.hos...@aeris.net.
Rick, I wish you the absolute best with this process.
First and foremost, the good news is that you are in good physical shape, since
biking keeps you fit. Therefore, surgery should go smoothly, and post-surgery
recovery will be easier for you.
But please don't rush it after the surgery! Having
I am using FM 10 on a Windows 7 Ultimate, 64 bit laptop system (also with 8 GB
of RAM) and do not have any issues. Of course, it runs as a 32 bit application
even though the OS is 64 bit.
So, I would definitely agree with FM 10 being more stable compared to FM 7.2, 8
or 9. All those others had
I am using FM 10 on a Windows 7 Ultimate, 64 bit laptop system (also with 8 GB
of RAM) and do not have any issues. Of course, it runs as a 32 bit application
even though the OS is 64 bit.
So, I would definitely agree with FM 10 being more stable compared to FM 7.2, 8
or 9. All those others had
Hmmm ... Lea, you may be right, but I also saw this (see below) at
http://blogs.adobe.com/techcomm/2012/04/part-5-%C2%BD-reasons-to-upgrade-from-fm-7-x-to-fm-10-summary-thus-far.html
at the bottom of the page.
The above is a link to an Adobe site ... so is safe, I hope!
Z
Limited Period Specia
Hmmm ... Lea, you may be right, but I also saw this (see below) at
http://blogs.adobe.com/techcomm/2012/04/part-5-%C2%BD-reasons-to-upgrade-from-fm-7-x-to-fm-10-summary-thus-far.html
at the bottom of the page.
The above is a link to an Adobe site ... so is safe, I hope!
Z
Limited Period Specia
> Will someone please help with this question?
> Thank you,
> John
1. Start by making a backup copy of everything in case you mess up, so that you
can recover gracefully!
2. Exit FrameMaker (or certainly make darn sure that you are not editing the
book or any of its files!)
3. In the OS (I ass
> Will someone please help with this question?
> Thank you,
> John
1. Start by making a backup copy of everything in case you mess up, so that you
can recover gracefully!
2. Exit FrameMaker (or certainly make darn sure that you are not editing the
book or any of its files!)
3. In the OS (I ass
Does the version of FrameMaker that he is using support Unicode? That may be
the source of the problem.
Z
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Ed Lightle
Sent: Thursday, May 24, 2012 5:07 AM
To: framers@lists.frameusers.com
Subjec
Does the version of FrameMaker that he is using support Unicode? That may be
the source of the problem.
Z
From: framers-bounces at lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Ed Lightle
Sent: Thursday, May 24, 2012 5:07 AM
To: framers at lists.frameusers.com
Okay, it looks like it is Confluence 4.X ... we use their hosted site for Jira
by Atlassian (www.atlassian.com), so it is there latest hosted version of
Confluence.
Z
-Original Message-
From: Syed Zaeem Hosain (syed.hos...@aeris.net)
Sent: Friday, May 18, 2012 11:44 PM
To: 'R
Okay, it looks like it is Confluence 4.X ... we use their hosted site for Jira
by Atlassian (www.atlassian.com), so it is there latest hosted version of
Confluence.
Z
-Original Message-
From: Syed Zaeem Hosain (syed.hos...@aeris.net)
Sent: Friday, May 18, 2012 11:44 PM
To: 'R
ay 18, 2012 at 11:44 AM, Syed Zaeem Hosain
(syed.hos...@aeris.net) wrote:
> Thanks, Jeremy. I will take a look at his efforts to do this.
>
> I already have a login on mif2go.com and recently download the demo version
> of MIF2go 4.0.
>
> Just need to install and try it to see if it
I am not sure ... I will go check the site to see which version it is and
report back soon.
Z
-Original Message-
From: framers-bounces at lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Robert Lauriston
Sent: Friday, May 18, 2012 11:55 AM
To: framers at l
this time. ☺
Thanks for the added information, and the endorsement, though.
Z
From: Yves Barbion [mailto:yves.barb...@gmail.com]
Sent: Friday, May 18, 2012 1:47 PM
To: Syed Zaeem Hosain (syed.hos...@aeris.net)
Cc: framers@lists.frameusers.com
Subject: Re: Resources to help a newbie create DITA
Hi, Yves.
Oh, I agree that if I were indeed _needing_ to use DITA for my work right now,
then DITA-FMx would be at the top of the list.
However, with my current documentation workflow (as mentioned in a different
thread), it is overkill for me to buy DITA-FMx for my own education purposes at
t
: Resources to help a newbie create DITA documents in FrameMaker 10)
On Fri, 18 May 2012 11:07:03 -0700, "Syed Zaeem Hosain (syed.hos...@aeris.net)"
wrote:
>So, I need to change my flow to output clean HTML that can be far more
>easily put into Confluence and am trying to figure out
Thanks, Jeremy. I will take a look at his efforts to do this.
I already have a login on mif2go.com and recently download the demo version of
MIF2go 4.0.
Just need to install and try it to see if it is what works best for me. If so,
then I will proceed to a purchase.
Thanks again!
Z
-Orig
Thanks, Nadine and Scott.
As I mentioned in my other e-mail, DITA is just a learning curiosity for me at
this point. It *seems* overly compex for what I need, but looking to learn
nevertheless ...
Now to real reason for this thread!
My *current* flow is simple:
1. Write the documents and
Thanks, Nadine and Scott.
As I mentioned in my other e-mail, DITA is just a learning curiosity for me at
this point. It *seems* overly compex for what I need, but looking to learn
nevertheless ...
Now to real reason for this thread!
My *current* flow is simple:
1. Write the documents and
osain (syed.hos...@aeris.net)
Cc: framers@lists.frameusers.com
Subject: Re: Resources to help a newbie create DITA documents in FrameMaker 10
Ah .. the OT plugin. Yes .. that's a "connector" plugin that allows you to
process your DITA content through the DITA Open Toolkit. Adobe pr
Thanks for the detailed reply, Scott!
Right now, DITA is a curiosity for me and I want to learn more about it. I.e.,
I don't have any specific need to create documents/output using DITA for our
company.
So, buying DITA-FMx does not make sense for me, since I would not be able to
justify expens
Message-
From: Writer [mailto:generic...@yahoo.ca]
Sent: Friday, May 18, 2012 9:05 AM
To: Syed Zaeem Hosain (syed.hos...@aeris.net); Scott Prentice;
framers@lists.frameusers.com
Subject: Re: Resources to help a newbie create DITA documents in FrameMaker 10
It's built into FM 10 as it was
Hmmm ... I may have been quite unclear in my question, since I am a DITA novice!
The reason I asked is that the Adobe web site has a "FrameMaker 9 Plug-in for
DITA Open Toolkit" here:
http://www.adobe.com/devnet/framemaker/fm9_opentoolkit.html
But I don't see an equivalent for FM 10 ... at leas
Hi, Nadine, Scott, et. al.
A question for users of FrameMaker 10 ... is the DITA support built-in to this
version, or is there a separate plug-in for it (like was released by Adobe for
FrameMaker 9)?
If it is a plug-in still, does anyone have a link for it? I searched the Adobe
web site and di
Hi, Nadine, Scott, et. al.
A question for users of FrameMaker 10 ... is the DITA support built-in to this
version, or is there a separate plug-in for it (like was released by Adobe for
FrameMaker 9)?
If it is a plug-in still, does anyone have a link for it? I searched the Adobe
web site and di
401 - 500 of 902 matches
Mail list logo