Eugeny Kuzakov wrote:
On 7/11/06, Alex Zbyslaw [EMAIL PROTECTED] wrote:
Lowell Gilbert wrote:
Er, no, unless I am much mistaken it doesn't imply that at all (see man
ataraid). FreeBSD handles plenty of software (metadata only) RAIDs,
though I believe that an archive search will turn up
On 7/10/06, Eugeny Kuzakov [EMAIL PROTECTED] wrote:
I need mirror device, contained 2 partitions -- fat32ufs.
I want to use fat32 under freebsdwindows xp.
I would forget about sil3112 raid capabilities and use
software raid in both OS's. gmirror rocks and I hear that
winxp has a good
Dear all,
I need upgrade my OS to new release. But this computer not connected to
Internet and I don't have possibility to download new image. Also there is
no way to connect it to Internet in the future. How I can do it?
The next question is how I can install security patches with the same
When trying to move a message from my INBOX folder to another
folder, I usually (4 out of 5?) find that the imapd process has
crashed. SquirrelMail is nice enough to tell me this:
ERROR: Connection dropped by IMAP server.
Query: COPY 18238,18255 mail/Trash
Looking in
On Jul 12, 2006, at 1:57 AM, Ivakin E. Dmitriy 83432 wrote:
I need upgrade my OS to new release. But this computer not
connected to
Internet and I don't have possibility to download new image. Also
there is
no way to connect it to Internet in the future. How I can do it?
Could you take a
On 7/12/06, Andrew Pantyukhin [EMAIL PROTECTED] wrote:
On 7/10/06, Eugeny Kuzakov [EMAIL PROTECTED] wrote:
I need mirror device, contained 2 partitions -- fat32ufs.
I want to use fat32 under freebsdwindows xp.
I would forget about sil3112 raid capabilities and use
software raid in both
Jaime wrote:
When trying to move a message from my INBOX folder to another
folder, I usually (4 out of 5?) find that the imapd process has
crashed. SquirrelMail is nice enough to tell me this:
ERROR: Connection dropped by IMAP server.
Query: COPY 18238,18255 mail/Trash
Looking in
In response to Ivakin E. Dmitriy 83432 [EMAIL PROTECTED]:
Dear all,
I need upgrade my OS to new release. But this computer not connected to
Internet and I don't have possibility to download new image. Also there is
no way to connect it to Internet in the future. How I can do it?
The next
Hi.
In the FreeBSD manual on '17.6.9 Using the ATAPI/CAM Driver', it only talks
about rebuilding the kernel with device atapicam.
I think it should mention that it actually is possible to just add
'atapicam_load=YES' to /boot/loader.conf.
Perhaps I have missed or overlooked something and in
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
I'm porting FreeBSD to Gentoo for the Summer of Code project
Gentoo/FreeBSD for Amd64, and I need a little help about gcc binary
output when compiling files.
I compiled by hand GCC, and when I compile some file the output format
is UNIX -
Good morning all,
I was wondering if anyone had any suggestions as to a tape backup solution
that carries the most bang for the buck. The ideal would be:
* LTO-3
* Works with Bacula or similar and 6.x
* Autochanger
* Ability to handle 30-40 heterogeneous servers of varying size
All
im Running FreeBSD 6.1-STABLE and the last week or more i have had problems
trying to upgrade this port .. below is the full work up fo trying to install
the package manually from the ports. Any assistance into whats happening
would be appreciated.
==
===
im Running FreeBSD 6.1-STABLE and the last week or more i have had problems
trying to upgrade this port .. below is the full work up of trying to install
the package manually from the ports. Any assistance into whats happening
would be appreciated.
==
exports/lib
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Kevin Brunelle wrote:
Otherwise doing a 'make package' after the port has been installed will
create a package for you. You should then be able to install the package
on the other machine using pkg_add.
HTH,
Micah
If you've already done make
Good morning all,
I was wondering if anyone had any suggestions as to a tape backup solution
that carries the most bang for the buck. The ideal would be:
* LTO-3
* Works with Bacula or similar and 6.x
* Autochanger
* Ability to handle 30-40 heterogeneous servers of varying size
I
I have the following in my named.conf
logging {
channel my_syslog {
syslog local5;
severity info;
};
};
In /etc/syslog.conf I have the following
local5.*/var/log/bind/bind.log
I have a borked entry in my /etc/fstab: the box can't find /dev/da4s1
or something at boot. So it hangs at boot asking me if I want to use
/bin/sh in single user mode. But when I bang on the USB keyboard,
FreeBSD doesn't hear the keys.
I recall that previous boot menus offered a boot with USB
All,
I am trying to get a linux app to use hardware acceleration. I have a
couple of linux apps (googleearth, NWN) that *do presently work* with
hardware acceleration... but this one in particular (linux-ut) *does not*.
It gives me the following error in its log file:
Critical: Failed
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I'm running FreeBSD 5.4-RELEASE and I want to run a current Oracle
client-only with encryption support.
First, I installed the Oracle client port, which represents Oracle 7. But
my database support person tells me that's quite old and, in fact,
never had this issue until today. i have box (same config or build
process as all my others) that already has net-snmp built from port.
today, went to install php5 and php5-extensions. php5 had no issues, but
php5-extensions is trying to build ucd-snmp, and then errors out that its
incompatible
On Wed, 12 Jul 2006, Gábor Kövesdán wrote:
Jaime wrote:
Looking in /var/log/messages, I find lines like this:
Jul 11 21:28:47 atlas kernel: pid 81702 (imapd), uid 1001: exited on signal
11
Are you using any CFLAGS in /etc/make.conf?
I don't remember changing anything in there.
In response to Chris Shenton [EMAIL PROTECTED]:
I have a borked entry in my /etc/fstab: the box can't find /dev/da4s1
or something at boot. So it hangs at boot asking me if I want to use
/bin/sh in single user mode. But when I bang on the USB keyboard,
FreeBSD doesn't hear the keys.
I
try remove local5.none from syslog - although you have instructed it not to
log anything in messages
or specify local5.info for named
2006/7/12, Josh Paetzel [EMAIL PROTECTED]:
I have the following in my named.conf
logging {
channel my_syslog {
syslog local5;
[EMAIL PROTECTED] wrote:
On Wed, 12 Jul 2006, Gábor Kövesdán wrote:
Jaime wrote:
Looking in /var/log/messages, I find lines like this:
Jul 11 21:28:47 atlas kernel: pid 81702 (imapd), uid 1001: exited on
signal 11
Are you using any CFLAGS in /etc/make.conf?
I don't remember
Chris Shenton wrote:
Any suggestions how to get it to see the USB keyboard in the boot?
This Dell box doesn't have a non-USB keyboard input.
The keyboard usually works on the boot menu as the bios is in control.
So, exit the menu to load the kernel modules you need, usb, ukbd and
uhid I think
Hello,
I installed linux-flock and linuxplugin wrapper. Then when I went to a
webpage with flash, it asked me if i wanted to install it and i did.
flash works great for me.
On 7/11/06, Erin Sharmahd [EMAIL PROTECTED] wrote:
I've been working on trying to get flash working on my freebsd 6.1
On Mon, Jul 10, 2006 07:48 PM, Bill Moran wrote:
[EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I can read from my CDROM under Windows 98 , but when I try
to read from it under FreeBSD 4.3 I get told that the device is
busy. My presumption is that either part of the device driver is
Hi list,
I've installed The Music Player Daemon (MPD) from the ports
(audio/musicpd). I have a nice configuration file [1] in
/usr/local/etc/mpd.conf, but, when I run:
/usr/local/etc/rc.d/musipd.sh start [or stop, or restart, whatever]
its not doing anything. I've copied the
Hi,
I have installed apache20 using the pckg_add -r apache.
How do i run it, where and how do i test it..
I have FreeBSD 5.5 and am connected to internet.
--
What we see depends mainly on what we look for.
-MIHIR
___
freebsd-questions@freebsd.org
after you appropriately edit your conf file, you can start the server with
# apachectl start
You can test by going to http://127.0.0.1. should display an apache
page basically saying that the server is running. Once you get it how
you want it, you can start it at boot by adding this to your
This is a problem on a home-built computer using an
nVidia nForce4 motherboard.
IDE 1 and 2 each have two devices.
IDE 1 master: a Maxtor hard drive (jumpered to master)
IDE 1 slave: a CDRW (jumpered to slave)
IDE 2 master: CDRW (jumpered to master)
IDE 2 slave: CDRW (jumpered to slave)
So,
On Wednesday 12 July 2006 17:47, Neil Short wrote:
This is a problem on a home-built computer using an
nVidia nForce4 motherboard.
IDE 1 and 2 each have two devices.
IDE 1 master: a Maxtor hard drive (jumpered to master)
IDE 1 slave: a CDRW (jumpered to slave)
IDE 2 master: CDRW (jumpered
Heya,
I would like to make packets destined for an IP address bound to a
network card
Get dropped onto the wire so I can do some QoS on it. I found the the
following sysctl variable
But am unsure about what it does. I cannot find any documentation on
it.
net.link.ether.inet.useloopback
It is
On 12/07/06 Erik Nørgaard said:
The keyboard usually works on the boot menu as the bios is in control.
So, exit the menu to load the kernel modules you need, usb, ukbd and
uhid I think should do. Then boot into single user mode.
For next time, this happens, I suggest you build a kernel with
I'm trying to get my printer working with a realtivly new install of
6.1 Release w/ Gnome . . . cups and gimp-print were installed as
dependancies (I guess, as I didn't pick them) . . .
. . . all I've been able to find tells me I need to get gimp-print
drivers (for my canon S530D) working
Works like a charm.
Thank you.
* Simon Olofsson ([EMAIL PROTECTED]) wrote:
Hi,
try it with WITHOUT_IPV6=yes in /etc/make.conf
This should work.
On Wed, Jul 12, 2006 at 11:24:41PM +0300, Luchezar Petkov wrote:
error [13]: problems connecting to localhost on port 2100
--
Mit
I've been trying to configure my HP Officejet 4315 using CUPS 1.2.0 but so far
all I can do is configure a printer using the web interface and I'm able to
print a test page but when I try to print any other document I'm unable to
print, I get that quick popup window saying that cups is starting
hello, world!
I'm a FreeBSD newbie who is fumbling his way through FreeBSD 6.1. I am
trying to install software from CD using sysinstall, but can't figure
out how to eject CD 1 when it wants a package that's on CD 2. Pressing
the button on the drive has no effect. STFW I found a page
hello, world!
I'm a FreeBSD newbie who has installed FreeBSD 6.1-RELEASE-i386 using
the developer with X option. man doesn't seem to work:
2006-07-12 21:59:38 [EMAIL PROTECTED] ~
# man man
No manual entry for man
2006-07-12 22:12:42 [EMAIL PROTECTED] ~
# echo $MANPATH
Pete C wrote:
I'm trying to get my printer working with a realtivly new install of 6.1
Release w/ Gnome . . . cups and gimp-print were installed as
dependancies (I guess, as I didn't pick them) . . .
. . . all I've been able to find tells me I need to get gimp-print
drivers (for my canon
Thanks a lot for your reply, Jaime!
But you know, this PC is single machine with FreeBSD. I think it'll be good
choice to update source if I can download it from web-site as tar archive
(for example, like ports tree).
Best regards,
Ivakin Dmitriy
-Original Message-
From: Jaime
A day or three ago someone posted about having 6.1-CURRENT (I
believe) run on a MacBook laptop.
Does anyone have it running on a Mac Mini (intel)? I might be
interested in getting a couple to handle email services to nfs
mounted mail stores. I like their small size and ability to stick
42 matches
Mail list logo
