I have been using imap-uw for some time but now I would like to
have an imap server that can have subfolders. Out with imap-uw..
I tried dovecot but I was unable to get it to create subfolders,
although it seems some say you can, may people are having problems
doing so, and I didn't like the
Hi,
Thanks for your reply!
On 3/21/07, Simon Chang [EMAIL PROTECTED] wrote:
From what you are saying it sounds like you are getting the panic on
bootup. Is that correct?
Yes. immediately on boot up.
In looking through your config I don't see anything that really stands
out (although I
On 3/16/07, Rajkumar S [EMAIL PROTECTED] wrote:
safe0 mem 0xf612-0xf6121fff irq 5 at device 10.0 on pci0
safe0: cannot allocate DMA tag
Hi,
I have managed to track down this issue. The problem was that one
bus_dma_tag_create (at line 300) was failing to create dma tag, and
was returning
Thanks BAS for the very good explanation!!!
\\troback
On Wed, 21 Mar 2007 15:40:22 -0500
Brian A. Seklecki [EMAIL PROTECTED] wrote:
On Wed, 2007-03-21 at 21:11 +0100, Anders Troback wrote:
Disk status:
Filesystem 1K-blocks UsedAvail Capacity Mounted on
/dev/ad8s2a253678
How do you enable crash dumps when the swap partition is GBDE-
(or GELI-) encrypted? A setting of:
dumpdev=/dev/ad0s1b.bde
in /etc/rc.conf seems silly, because /etc/rc.d/encswap initializes
the swap partition with a new random passphrase on every reboot,
so savecore(8) won't be able to read the
I did not use /var/crash because /var was small than RAM. So I
manually changed the crash directory to /usr partition. I do not know
how to set savecore flag.
Check out man savecore for a list of flags. You normally set them
in /etc/rc.conf by putting in a line like: savecore_flags=-v -z,
In response to David Banning [EMAIL PROTECTED]:
I have been using imap-uw for some time but now I would like to
have an imap server that can have subfolders. Out with imap-uw..
I tried dovecot but I was unable to get it to create subfolders,
although it seems some say you can, may people
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello.
I got a reboot and a crash dump on a 6.2/i386 server.
Following is the stack trace.
Any hint?
bye Thanks
av.
--
# kgdb kernel.debug /var/crash/vmcore.0
kgdb: kvm_nlist(_stopped_cpus):
kgdb: kvm_nlist(_stoppcbs):
[GDB will not
David Banning wrote:
I have been using imap-uw for some time but now I would like to
have an imap server that can have subfolders. Out with imap-uw..
I tried dovecot but I was unable to get it to create subfolders,
although it seems some say you can, may people are having problems
doing so,
Hello,
I want to login on my freebsd remotely by ssh.
I don't want to download putty every time I want to login in my compter
from a computer that isn't mine.
I would like a html website that makes a shell and do everything over ssl.
Does anyone know a program/port that can help me?
In response to Koen de Wijs [EMAIL PROTECTED]:
Hello,
I want to login on my freebsd remotely by ssh.
I don't want to download putty every time I want to login in my compter
from a computer that isn't mine.
I would like a html website that makes a shell and do everything over ssl.
On Thu, Mar 22, 2007 at 02:28:21PM +0100, Koen de Wijs wrote:
Maybe this site will help
http://www.netspace.org/ssh/
Hello,
I want to login on my freebsd remotely by ssh.
I don't want to download putty every time I want to login in my compter
from a computer that isn't mine.
I would
Rajkumar S [EMAIL PROTECTED] writes:
Further to my previous mail.
On 3/20/07, Rajkumar S [EMAIL PROTECTED] wrote:
safe0 mem 0xf612-0xf6121fff irq 22 at device 10.0 on pci0
safe0: cannot allocate DMA tag
device_attach: safe0 attach returned 6
While running cryptokeytest from
On Wed, Mar 21, 2007 at 04:57:27PM -0700, Jim Priovolos wrote:
Hi, I've downloaded the 6.2 files. When I burned a CD with the boot file it
didn't make my laptop boot off it after powering up with it in the CD drive.
The *disk1 file burnt to a CD gave the same results.
I tried the *disk1
Hello,
I'm trying to put up a remote logging server. I want to let my
Airport Express send its logs to my FreeBSD server.
So I said to my Airport to send its logs to the internal ip of my
server, I suppose it works because that's what Apple hardware does.
Now I did the following things on my
When trying to create a snapshot (per the handbook at http://
www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/snapshots.html),
the creation of the snapshot fails: [...]
mount: /mnt/big: Filesize limit exceeded [...]
Am I doing something wrong?
Your account has a filesize limit set? Check
On Thu, Mar 22, 2007 at 01:04:26PM +0700, BSD wrote:
Hi,
Is it possible to install FreeBSD 6.2 on Nokia IP350 platform? Could you
please suggest me a link to the URL?
Is it an i386 or amd64 type machine?
If so, probably. If not, probably not.
There is a whole web page on the FreeBSD
Vlad GALU [EMAIL PROTECTED] writes:
Hello list, I've been trying to use TSC without disabling ACPI
and I failed. Is there a way I can achieve that? As long as ACPI was
in use, the system always chose ACPI-fast.
It varies a bit with the FreeBSD version, but did you try setting the
Quoting Vincent Bolinard [EMAIL PROTECTED]:
Hello,
I'd like to know how can I set up virtual users without pam_userdb.so
(which is not included in OpenPAM).
vsftpd needs pam_userdb.so to authenticate against the db Berkeley database.
What else can I use ?
I don't want to use MySQL because
Olivier Regnier [EMAIL PROTECTED] writes:
Hello,
I tried to make a custom FreeBSD ISO install image but when i use this
command :
prompt# cd /usr/src/release make release
CHROOTDIR=/ncvs/FreeBSD/release \
BUILDNAME=6.2-RELEASE-p3 CVSROOT=/ncvs/FreeBSD/cvs PORTSRELEASETAG=HEAD \
Why don't you put putty on a USB thumb drive and run it from there?
-Derek
At 08:28 AM 3/22/2007, Koen de Wijs wrote:
Hello,
I want to login on my freebsd remotely by ssh. I don't want to download
putty every time I want to login in my compter
from a computer that isn't mine.
I
You must have been doing something wrong. I have Dovecot in multiple
places and never had any trouble creating folders/subfolders.
I use Maildir format for my mail store, for multiple reasons that you
can research via Google if you're curious. Perhaps the Maildir support
is better than
abhishek singh [EMAIL PROTECTED] writes:
I am getting this kernel: sis0: Applying short cable fix (reg=e8) kernel
error in /var/log/messages what it does mean .I am using FreeBSD 5.4.
It's a recommended workaround from National Semiconductor for
behaviour that I would assume deals with
Derek Ragona wrote:
Why don't you put putty on a USB thumb drive and run it from there?
-Derek
i like this version of putty. its all file based, not the registry, so
all your settings and hosts are there:
http://jakub.kotrla.net/putty/
its really nice
Eric
This:
(0) ~ sudo rcorder /usr/local/etc/rc.d/* /etc/rc.d/*
/etc/rc.d/dumpon
/etc/rc.d/initrandom
/etc/rc.d/geli
/etc/rc.d/gbde
/etc/rc.d/encswap
/etc/rc.d/ccd
/etc/rc.d/swap1
/etc/rc.d/mdconfig
/etc/rc.d/ramdisk
/etc/rc.d/early.sh
/etc/rc.d/fsck
/etc/rc.d/root
/etc/rc.d/mountcritlocal
hi,
I'd like to ask where to download PluginManager, i can't find it in
FreeBSD.org.
regards,
by Frank
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
Having gotten sick of my cable company, I am
considering switching to Verizon FIOS. They want to
install a Actiontec Router Model MI424-WR. They
recommend the Westell USB network adapter. Does anyone
have any experience with that unit and FBSD. I can use
any adapter I want as long as it works with
Hi
I am running freebsd 6.1 and I am trying to use ktrace to see why the uhci0
controller process stops responding to usb events. I am use ktrace with the
-p option to attach to a process and also with all trace points turned on.
I don't see any calls in the file ktrace.out file . Am i using
On 3/22/07, Sam Leffler [EMAIL PROTECTED] wrote:
I have no context. I see a device not attaching for some reason. Then
/dev/crypto not being present (is cryptodev loaded in the kernel?). But
a subject line about a panic.
The device is not attaching because bus_dma_tag_create function fails
On 2007/03/22 6:52, David Banning seems to have typed:
I have Googled away and found lots of people who complain that they can't
creat subfolders under dovecot. I havn't seen anyone's problem resolved
in the theads. I have converted mbox to Maildir. I attempt to create
a subfolder from within
On 3/22/07, Simon Chang [EMAIL PROTECTED] wrote:
Check out man savecore for a list of flags.
Thanks, I will check that out.
Have you submitted a formal PR? I have to say that I have not had
experience with that device or driver. What other responses have you
gotten from people?
Yes,
On 3/22/07, Lowell Gilbert [EMAIL PROTECTED] wrote:
Vlad GALU [EMAIL PROTECTED] writes:
Hello list, I've been trying to use TSC without disabling ACPI
and I failed. Is there a way I can achieve that? As long as ACPI was
in use, the system always chose ACPI-fast.
It varies a bit with the
Lowell Gilbert wrote:
Rajkumar S [EMAIL PROTECTED] writes:
Further to my previous mail.
On 3/20/07, Rajkumar S [EMAIL PROTECTED] wrote:
safe0 mem 0xf612-0xf6121fff irq 22 at device 10.0 on pci0
safe0: cannot allocate DMA tag
device_attach: safe0 attach returned 6
While running
On 2007/03/22 8:14, Peter A. Giessel seems to have typed:
On 2007/03/22 6:52, David Banning seems to have typed:
a subfolder from within Outlook - no go. How are you creating
the subfolders?
Just tried creating a subfolder on dovecot running on FreeBSD with
Thunderbird 1.5.0.10 as a client.
On Mar 21, 2007, at 5:03 PM, Torbjorn Granlund wrote:
When vm attempts to make a TCP connection (e.g., on port 25) to
smtp.swox.se I see the following traffic on the router:
22:46:27.015389 IP vm.se.lsoft.com.47218 smtp.swox.se.smtp: S
27523124:27523124(0) win 8192 mss 1420,wscale
another quick jails question:
in my VMware environment, its quite common to create a VM on one machine, and
then take the VM's files and move them to another machine. how well would this
work with a jail? say, so tar the entire root directory of the jail, and
move/untar on to another server?
I have been using imap-uw for some time but now I would like to
have an imap server that can have subfolders. Out with imap-uw..
I tried dovecot but I was unable to get it to create subfolders,
although it seems some say you can, may people are having problems
doing so, and I didn't like
In response to Jonathan Horne [EMAIL PROTECTED]:
another quick jails question:
in my VMware environment, its quite common to create a VM on one machine, and
then take the VM's files and move them to another machine. how well would
this
work with a jail? say, so tar the entire root
In response to David Banning [EMAIL PROTECTED]:
You must have been doing something wrong. I have Dovecot in multiple
places and never had any trouble creating folders/subfolders.
I use Maildir format for my mail store, for multiple reasons that you
can research via Google if you're
hi,
I don't know what's the problem it is?
Making all in tests
Making all in cases
cd ../ .. /bin/sh ./config.status tests/cases/Makefile
config.status: creating tests/cases/Makefile
Making all in results
cd ../ .. /bin/sh ./config.status tests/results/Makefile
config.status: creating
Hello.
I think have a problem of locale. In /etc/login.conf I have:
default:\
[...]
:charset=ISO-8859-15:\
:lang=fr_FR.ISO8859-15:
and this gives at every login:
Message Catalog System: corrupt file.
Can this be related to a corrupt /usr/share/locale or
Hi folks,
I saw this in usr/ports/UPDATING:
20070318:
AFFECTS: users of devel/gettext (ie: YOU)
AUTHOR: [EMAIL PROTECTED]
As a result of the upgrade to gettext-0.16.1, the shared library version
of libintl has changed, so you will need to rebuild all ports that
depend on gettext (ie:
On 2007/03/22 9:38, David Banning seems to have typed:
I have this in my dovecot.conf;
mail_location = maildir:~/Maildir/:INBOX=/var/mail/%u
I am wondering if something like;
mail_location = maildir:~/Maildir/:INBOX=mbox:/var/mail/%u
would work
I would check the dovecot
David Banning wrote:
P.S. Just tried creating a subfolder with Outlook Express 6.00.2800.1807
and Apple Mail Version 2.1 (752/752.2) and the previously mentioned
IMAPs server, and it still works for both of them, so its not just in
Thunderbird that it works.
OK - I have it working - it seems
P.S. Just tried creating a subfolder with Outlook Express 6.00.2800.1807
and Apple Mail Version 2.1 (752/752.2) and the previously mentioned
IMAPs server, and it still works for both of them, so its not just in
Thunderbird that it works.
OK - I have it working - it seems the problem was
On Thu, 22 Mar 2007 01:40:48 -0500
David Banning [EMAIL PROTECTED] wrote:
I have been using imap-uw for some time but now I would like to
have an imap server that can have subfolders. Out with imap-uw..
I tried dovecot but I was unable to get it to create subfolders,
although it seems some
hi
I am running freebsd 6.1 and I am trying to use ktrace to see why the uhci0
controller process stops responding to usb events. I am use ktrace with the
-p option to attach to a process and also with all trace points turned on.
I don't see any calls in the file ktrace.out file . Am i using
FreeBSD-6.2
The installed version is gcc-3.4.6, while the ports
have version 4.3.0 available. If I install the newer
version will it replace the older version? If not and
I don't think it will, how do I force the use of the
newer version of Gcc when making a port? I tried
Googling for this but
Chuck Swiger [EMAIL PROTECTED] writes:
On Mar 21, 2007, at 5:03 PM, Torbjorn Granlund wrote:
When vm attempts to make a TCP connection (e.g., on port 25) to
smtp.swox.se I see the following traffic on the router:
22:46:27.015389 IP vm.se.lsoft.com.47218 smtp.swox.se.smtp: S
On Mar 22, 2007, at 11:55 AM, White Hat wrote:
The installed version is gcc-3.4.6, while the ports
have version 4.3.0 available. If I install the newer
version will it replace the older version?
Nope.
If not and I don't think it will, how do I force the use of the
newer version of Gcc when
In the last episode (Mar 22), White Hat said:
FreeBSD-6.2
The installed version is gcc-3.4.6, while the ports have version
4.3.0 available. If I install the newer version will it replace the
older version? If not and I don't think it will, how do I force the
use of the newer version of Gcc
On Mar 22, 2007, at 12:00 PM, Torbjorn Granlund wrote:
The second line should have been smtp.swox.se.smtp SYN+ACK'ing the
ISN of 27523124. vm is sending a RST to that because the sequence
#'s don't match. It's also odd that the set of options being
listed
don't correspond at all...if
I want to login on my freebsd remotely by ssh.
I would like a html website that makes a shell and do everything over ssl.
You're asking for different things, but you should be asking for
different things--because there probably isn't a single solution
that will work in all cases.
Web-based
I am trying to play on okwin 4.11 but I can't error NAT FORWARDING
OR YOU ARE FIREWALLAD I CAN;T SERVE
I can pl on okbridge plus or ok 4.02
i would like solve the problem can you help
BILL REINER
___
--- Chuck Swiger [EMAIL PROTECTED] wrote:
On Mar 22, 2007, at 12:34 PM, White Hat wrote:
Add:
CC?= /usr/local/bin/gcc
CXX?= /usr/local/bin/g++
...to /etc/make.conf. You might also find
looking
at /usr/ports/Mk/
bsd.gcc.mk to be informative...
Thanks! One other
Hi;
I have a server I just built with FBSD and I'd like to be able to surf using
a browser. What do I need to build to make that happen?
Thanks,
Stan2
-
Don't get soaked. Take a quick peek at the forecast
with theYahoo! Search weather shortcut.
On 2007/03/22 12:22, Stan Cooper seems to have typed:
Hi;
I have a server I just built with FBSD and I'd like to be able to surf using
a browser. What do I need to build to make that happen?
This is covered in the handbook:
On 3/22/07, Stan Cooper [EMAIL PROTECTED] wrote:
Hi;
I have a server I just built with FBSD and I'd like to be able to surf using
a browser. What do I need to build to make that happen?
I think the first problem here is having the words server and surf
in the same sentence...
Anyway,
Thanks!2
Pietro Cerutti [EMAIL PROTECTED] wrote: On 3/22/07, Stan Cooper wrote:
Hi;
I have a server I just built with FBSD and I'd like to be able to surf using
a browser. What do I need to build to make that happen?
I think the first problem here is having the words server and surf
in the
On Thu, 22 Mar 2007, White Hat wrote:
--- Chuck Swiger [EMAIL PROTECTED] wrote:
On Mar 22, 2007, at 12:34 PM, White Hat wrote:
Add:
CC?=/usr/local/bin/gcc
CXX?= /usr/local/bin/g++
...to /etc/make.conf. You might also find
looking
at /usr/ports/Mk/
bsd.gcc.mk to be informative...
On Thu, 22 Mar 2007, Alain G. Fabry wrote:
On Thu, Mar 22, 2007 at 02:28:21PM +0100, Koen de Wijs wrote:
Maybe this site will help
http://www.netspace.org/ssh/
Hello,
I want to login on my freebsd remotely by ssh.
I don't want to download putty every time I want to login in my compter
On Wed, 21 Mar 2007, Ray wrote:
On Wednesday 21 March 2007 5:57 pm, Jim Priovolos wrote:
Hi, I've downloaded the 6.2 files. When I burned a CD with the boot file it
didn't make my laptop boot off it after powering up with it in the CD
drive.
The *disk1 file burnt to a CD gave the same
I'm looking for some suggestions on where to start troubleshooting performance
issues on a Intel PRO 1000 card.
It's installed in a box with the following configuration:
FreeBSD 6.1
AMD Athlon(tm) XP 2100+ (1741.42-MHz 686-class CPU)
Dell CERC SATA RAID 2
The file
Using a Sony CRX850E slimline CD burner / DVD reader
FreeBSD 6.1
I write a single file to the CD and say -fixate; the command shows the
progress of writing
and then finishes with no error message. Trying to then mount that CD on FreeBSD says
unrecognizable
and on windows says maybe disk is
At 00:29 17.03.2007, Pieter de Goeje wrote:
On Friday 16 March 2007 10:32, Kyrre Nygård wrote:
Hello,
Is it possible to make MERGEMASTER(8) automatically replace files
with a FreeBSD CVS Id, and skip (or prompt interactively) the ones
without a FreeBSD CVS Id? The ones without are most
Hey!
I was wondering if anybody could give me a quick cheat sheet for how
to automatically:
1) Download all outdated ports
2) Switch to single user mode
3) Upgrade those ports
Running portupgrade -a doesn't work very well when it's time to
upgrade running processes.
I assume this involves
On Thu, Mar 22, 2007 at 01:22:15PM -0700, Stan Cooper wrote:
Hi;
I have a server I just built with FBSD and I'd like to be able to surf using
a browser. What do I need to build to make that happen?
Thanks,
Stan2
First you need to configure X-windows and have it running.
You configure it
On Thu, Mar 22, 2007 at 12:31:32PM -0700, UCTC Sysadmin wrote:
Using a Sony CRX850E slimline CD burner / DVD reader
FreeBSD 6.1
I write a single file to the CD and say -fixate; the command shows the
progress of writing
and then finishes with no error message. Trying to then mount that CD
On Mar 22, 2007, at 3:45 PM, David Robillard wrote:
Hello,
I'm trying to put up a remote logging server. I want to let my
Airport Express send its logs to my FreeBSD server.
So I said to my Airport to send its logs to the internal ip of my
server, I suppose it works because that's what Apple
Hello.
I've got a PDF document with two side-by-side pages in A3 format.
Is there a way I can get the two single A4 pages, either as subsequent
pages of a new document or as different new documents?
Anything in the port tree?
bye Thanks
av.
On Thursday 22 March 2007 21:22:15 Stan Cooper wrote:
Hi;
I have a server I just built with FBSD and I'd like to be able to surf
using a browser. What do I need to build to make that happen?
Thanks,
Stan2
If you mean a browser on the console (not in XWindow system) there's lynx and
links
Sally,
On 3/22/07, Sally Janghos [EMAIL PROTECTED] wrote:
I'm looking for some suggestions on where to start troubleshooting
performance issues on a Intel PRO 1000 card.
It's installed in a box with the following configuration:
FreeBSD 6.1
AMD Athlon(tm) XP 2100+ (1741.42-MHz
On Mar 22, 2007, at 2:52 PM, Andrea Venturoli wrote:
I've got a PDF document with two side-by-side pages in A3 format.
Is there a way I can get the two single A4 pages, either as
subsequent pages of a new document or as different new documents?
Anything in the port tree?
Acrobat, maybe?
On Mar 22, 2007, at 10:44 PM, Guido Demmenie wrote:
On Mar 22, 2007, at 3:45 PM, David Robillard wrote:
Hello,
I'm trying to put up a remote logging server. I want to let my
Airport Express send its logs to my FreeBSD server.
So I said to my Airport to send its logs to the internal ip of
Sally,
On 3/22/07, Sally Janghos [EMAIL PROTECTED] wrote:
I'm looking for some suggestions on where to start troubleshooting
performance issues on a Intel PRO 1000 card.
It's installed in a box with the following configuration:
FreeBSD 6.1
AMD Athlon(tm) XP 2100+
On Thursday 22 March 2007 16:52, Andrea Venturoli wrote:
Hello.
I've got a PDF document with two side-by-side pages in A3 format.
Is there a way I can get the two single A4 pages, either as subsequent
pages of a new document or as different new documents?
Anything in the port tree?
Try
UCTC Sysadmin wrote:
Using a Sony CRX850E slimline CD burner / DVD reader
FreeBSD 6.1
I write a single file to the CD and say -fixate; the command shows the
progress of writing
and then finishes with no error message. Trying to then mount that CD on
FreeBSD says unrecognizable
and on
On 22/03/07, bela.reiner [EMAIL PROTECTED] wrote:
I am trying to play on okwin 4.11 but I can't error NAT FORWARDING
OR YOU ARE FIREWALLAD I CAN;T SERVE
I can pl on okbridge plus or ok 4.02
i would like solve the problem can you help
BILL REINER
At some point
On 3/22/07, Kyrre Nygård [EMAIL PROTECTED] wrote:
Hey!
I was wondering if anybody could give me a quick cheat sheet for how
to automatically:
1) Download all outdated ports
man portupgrade
(hint: -F option)
2) Switch to single user mode
3) Upgrade those ports
Please someone correct me if
[Jeffrey Goldberg]
As an aside, I'd like to rant that there is no reason for ftp to
exist anymore. Sure it is stateful in a way that HTTP isn't, but
that isn't enough to justify its continued use.
I have very good connectivity to several FTP-only mirror sites,
and relatively poor
In looking at the documentation for cdrecord, the examples showed a two-step
process
of making an ISO image then burning it.
Here's my deal:
NEVER HAVING BURNED a CD or DVD on FreeBSD before -
I go to the documentation to FIND OUT HOW
and there really is no HOW
So I look in vain for
What you
On Mar 22, 2007, at 4:16 PM, UCTC Sysadmin wrote:
In looking at the documentation for cdrecord, the examples showed
a two-step process
of making an ISO image then burning it.
Here's my deal:
NEVER HAVING BURNED a CD or DVD on FreeBSD before -
I go to the documentation to FIND OUT HOW
and
[Format recovered--see http://www.lemis.com/email/email-format.html]
Line length unified.
On Thursday, 22 March 2007 at 16:16:58 -0700, UCTC Sysadmin wrote:
In looking at the documentation for cdrecord, the examples showed
a two-step process of making an ISO image then burning it.
Here's my
--On March 22, 2007 4:16:58 PM -0700 UCTC Sysadmin
[EMAIL PROTECTED] wrote:
So THE FAQ and/or HOWTO SUCKS, is the problem. If that offends purists,
try fixing your transmission
under deadline with a japanese shop manual translated into english and
no diagrams. Documentation makes
all the
On Thu, 22 Mar 2007, UCTC Sysadmin wrote:
[snip]
mount -t cd9660 /dev/acd0 /mnt
fails and the CD is also unreadable on windows.
Well duh. That is because THE FILE SYSTEM HAS TO BE CREATED MANUALLY.
Now, users used to smart unix commands read the man page and it SAYS
of burncd
fixate
On Mar 22, 2007, at 6:16 PM, UCTC Sysadmin wrote:
[snip]
So THE FAQ and/or HOWTO SUCKS, is the problem. If that offends
purists, try fixing your transmission
under deadline with a japanese shop manual translated into english
and no diagrams. Documentation makes
all the difference, both to
Hello to all.
I need to model data bases, so, my question is if some of you could know
about a good database designer like ERWin, but that resides in ports. I've
just installed pydbdesigner, but doesn't fit my needs at all, in fact,
nothing at all.
Thanks in advance.
--
$ miguel_alcántara $
…
Hi;
How do I determine the uptime of my server?
Thanks,
Stan2
-
TV dinner still cooling?
Check out Tonight's Picks on Yahoo! TV.
___
freebsd-questions@freebsd.org mailing list
On Thursday 22 March 2007 23:42, Jerry McAllister wrote:
On Thu, Mar 22, 2007 at 12:31:32PM -0700, UCTC Sysadmin wrote:
[broken CDs under burncd]
The main thing I did was take out the '-s max' speed parameter
Just as a further point of reference, I also found that -s max caused the
DVD+RW
90 matches
Mail list logo
