Hi--
On Apr 6, 2010, at 6:21 AM, Randal L. Schwartz wrote:
RW == RW rwmailli...@googlemail.com writes:
RW Imperative languages have a natural order of decision followed by
RW action, and code is most easily readable if the syntax doesn't try to
RW subvert that.
And yet, there's an
On Apr 6, 2010, at 11:07 AM, Randal L. Schwartz wrote:
Chuck == Chuck Swiger cswi...@mac.com writes:
Chuck Let's suppose you want to display one message if debugging is
Chuck enabled, and a shorter message if it is not.
Then you wouldn't have used this construct.
If the construct isn't
On Apr 6, 2010, at 11:43 AM, Randal L. Schwartz wrote:
Chuck == Chuck Swiger cswi...@mac.com writes:
Then you wouldn't have used this construct.
Chuck If the construct isn't a good idea considering the most obvious
Chuck change one might make to the code,
Objection: presumes facts
On Mar 26, 2010, at 5:18 PM, Joe R. Jah wrote:
Since last Monday my ssh connections started working erraticly. Today I
tested it by holding down a key until it stops printing, and made several
itterations; it turns out that ~1500 key strokes print on the screen; then
it stops responding for
On Mar 16, 2010, at 10:02 AM, Martin McCormick wrote:
Is there a FreeBSD command similar to the Linux arch command?
POSIX provides `uname -m`...? You should get either i386 or amd64, depending
on whether the system is running that architecture.
Regards,
--
-Chuck
On Mar 13, 2010, at 7:37 PM, johnea wrote:
I have been using freebsd-update to update several 7.1 systems.
[ ... ]
How can I build the source updated by freebsd-update?
freebsd-update provides a binary update mechanism.
It doesn't do anything to update the source files; if you choose to
On Mar 13, 2010, at 8:10 PM, johnea wrote:
guess I was lead to believe that it updated the source from this entry in
the handbook:
The default is to update the source code, the entire base system, and the
kernel.
http://www.freebsd.org/doc/handbook/updating-upgrading-freebsdupdate.html
Hi, Elmar--
On Mar 12, 2010, at 9:54 AM, Elmar Stellnberger wrote:
I am looking forward to engage in FreeBSD by implementing ext3-support
and a suspend to disk facility.
mount_ext2fs or fusefs ought to work with ext3 filesystems.
zzz or acpiconf -s 4 ought to address the suspend to disk
On Mar 11, 2010, at 3:05 PM, David Jackson wrote:
[ ... ]
I seem to have also discovered that the lockup problems are not entirely due
to USB issues. Many of them were being caused by an apparent problem with the
swap system. I have two swaps, a file backed swap and a partition swap on the
Hi--
On Mar 9, 2010, at 8:07 AM, Pongthep Kulkrisada wrote:
Further to previous suggestion in this mailing list,
I have just updated from FreeBSD 8.0-STABLE to the latest patch.
This is good.
I firstly use freebsd-update but it failed ...
[ ...Colin Percival is the owner of this, so I won't
Hi--
On Mar 8, 2010, at 8:52 AM, David Jackson wrote:
I am still having severe problems with severe system instabilities with
FreeBSD and have had these problrms in 7.1 and 8.0. The system randomly locks
up, it appears applications lock up when they access the USb disk. Also, when
On Mar 5, 2010, at 11:35 PM, Pongthep Kulkrisada wrote:
* Warren Block (wbl...@wonkity.com) wrote:
When you upgrade from 7.x to 8.x, it's necessary to rebuild *all*
ports.
Thanks for your suggestion, but it does not seem likely.
All operating systems can always distinguish the system and
On Mar 6, 2010, at 1:57 AM, Pongthep Kulkrisada wrote:
So your system is approx. 4 months old, despite you cvsup-ping?
I don't know what do you mean.
Normally, FBSD issues new STABLE RELEASE once a year (approx).
Whenever new release or new branch is available,
I shall do either wget iso
On Mar 6, 2010, at 4:36 AM, Matthew Seaman wrote:
Having an IPv6-only high-mx seems to terminally confuse most
spambots...
I understand why IPv6 would confuse them, but don't follow why higher
numbered MXs would be more attractive to them in the first place?
Are they assuming a 'secondary'
On Mar 6, 2010, at 12:44 PM, James Phillips wrote:
Correction: Apple stopped selling computers with floppy drives about
10 years ago. The floppy drive is not obsolete because there is
still no viable replacement that has the same (or better)
functionality.
While I think floppy drives are
Olivier GARNIER wrote:
I have a weather station (Lacross WS2350). (can be connect by USB / RS232).
I want to get data from a FreeBSD server 70 meter from the weather
station (with http://www.wviewweather.com/ software).
I already have a RJ45 cable between the two objects.
You can simply
Aaron Lewis wrote:
[r...@meilk /usr/src/sys/i386/compile/AARON]# make
CC='cc' make -f ../../../dev/aic7xxx/aicasm/Makefile
MAKESRCPATH=../../../dev/aic7xxx/aicasm
Warning: Object directory not changed from original
/usr/src/sys/i386/compile/AARON
cc -O2 -pipe -march=i686 -ffast-math
Hi--
On Feb 26, 2010, at 10:57 AM, Robert Bonomi wrote:
http://69.147.83.38/mailman/listinfo/freebsd-emulation
This is quite wrong. You are being redirected through DNS to a bogus
FreeBSD.org host name alias.
*IF* it is wrong, then it is the 'authoritative' FreeBSD nameservers that are
On Feb 19, 2010, at 3:59 PM, Chad Perrin wrote:
What's the simplest/easiest way to use secure memory (i.e., memory that
won't be written to a swap partition) from within a program (written in
Ruby in this case) on FreeBSD?
Well, Ruby supports calling C functions, so you can invoke mlock() that
On Feb 24, 2010, at 7:02 AM, Paul Halliday wrote:
http://processorfinder.intel.com/details.aspx?sSpec=SLANP
CPU: Intel(R) Xeon(R) CPU X5460 @ 3.16GHz (3158.77-MHz 686-class
CPU)
I am just reading this (the marked as 5xx numbers has me confused):
The CPU you are looking up is a
Hi--
On Feb 18, 2010, at 11:10 AM, Programmer In Training wrote:
Am I just having a case of the stupids here? It has been a few years
since I've managed Apache even for local testing. I've also adjusted the
permissions for that directory with no change. Also, the log files show
Apache going
Hi--
On Feb 18, 2010, at 11:31 AM, Programmer In Training wrote:
On 02/18/10 13:21, Chuck Swiger wrote:
snip
Apache is going to look up the home directories specified in
/etc/passwd via getpwent() or similar. If allowed, it would chase a
Then it shouldn't even bother with having a setting
Hi--
On Feb 17, 2010, at 7:24 AM, Peter Steele wrote:
[ ... ]
It never gets past this last log line and we have to do a kill -9 on the ntpd
process. Everything is identical as far as the conf and drift files are
concerned, we're using lagg interfaces on both systems. The versions of the
Hi--
On Feb 17, 2010, at 11:50 AM, Peter Steele wrote:
My ntp.conf looks like this:
# General Configuration
server 0.us.pool.ntp.org
server 1.us.pool.ntp.org
server 2.us.pool.ntp.org
server 3.us.pool.ntp.org
# Drift file
driftfile /var/db/ntpd.drift
Wonderful: short and clear. :-)
Hi--
On Feb 17, 2010, at 3:06 PM, Bill Tillman wrote:
The tech told me that I need to forward ports 500 and 4500 with my FreeBSD
router to the small VPN router inside my LAN. That's simple enought but then
he tells me I need to redirect all EPS and all AH traffic as well. I guess
this is
Hi--
On Feb 17, 2010, at 3:59 PM, Yuri wrote:
Erik Trulsson wrote:
It very much depends on what hardware you have in the system. Just
about every expansion card or I/O device will reserve some of the
address space for its own use. Some devices will need a lot of space - a
graphics card
On Feb 15, 2010, at 10:12 AM, tristan wrote:
i recently installed freebsd on my system. when i sign in to the root
account, i get a prompt telling me about the documentation, then a # sign.
how do i acess an interactive desktop like the one in windows/mac?
Install and configure an X11
On Feb 15, 2010, at 10:38 AM, tristan wrote:
is the FreeBSD-8.0-amd.iso itself under the bsd license?
Mostly; there's a compilation copyright associated with the FreeBSD ISO images,
but some of the components of FreeBSD are under the GPL (notably the GCC
compiler toolchain), and possibly CDDL
On Feb 11, 2010, at 8:05 PM, Steve Franks wrote:
Main thing is that portupgrade -f gamin is *not* putting fresh bsd
copies overtop the bad linux ones I stupidly installed, and anything
with gtk is now useless (shared object 'libselinux.so.1 not found,
required by libgio-2.0.so.0), which is
On Feb 9, 2010, at 12:41 PM, Nerius Landys wrote:
First, I noticed that I was able to send data that is 9216 in length
between 2 FreeBSD 7.1 hosts (far apart in network distance) running
Sun JDK 1.5.0_16-p9 (compiled myself from /usr/ports/java/jdk15).
[ ... ]
For my particular application, I
On Feb 9, 2010, at 12:59 PM, Nerius Landys wrote:
% sysctl net.inet.udp.maxdgram
net.inet.udp.maxdgram: 9216
However, increasing it will guarantee that you will exceed even normal jumbo
frame size and thus depend upon IP fragmentation / reassembly for the
traffic. I don't consider that
On Feb 8, 2010, at 6:16 AM, DAve wrote:
I am syncing with three server from N.us.pool.ntp.org. I have no fudge
configured.
]# ntpq -c peers
remote refid st t when poll reach delay offset
jitter
On Feb 7, 2010, at 5:54 AM, yavuz wrote:
I want to cheat os fingerprinting tools ( primary nmap) in my freebsd
machine. Assume I am using freebsd 8 and I want to be seen as a windows xp
machine when someone scans my ports.
I'll try not to second-guess this goal, but you should be aware that
Hi--
On Jan 29, 2010, at 8:51 AM, James Smallacombe wrote:
On Thu, Jan 28, 2010 at 12:59 PM, James Smallacombe u...@3.am wrote:
To follow up on this: Noticed the issue again this morning, which also was
accompanied by latency so high that I could not connect (some pings got
through at very
On Jan 29, 2010, at 9:41 AM, Steven Friedrich wrote:
I've noticed that several apps support images of the user, such as KMail,
which supports a 40x40 pixel jpeg.
I have a webcam, but it won't take a monochrome picture and it doesn't
snapshot all the resolutions that it can display in. In
Hi--
On Jan 29, 2010, at 11:29 AM, Ronny Forberger wrote:
my FreeBSD seems to be broken, since I get the following error when
trying to link against libssl etc:
/libexec/ld-elf.so.1: /usr/local/lib/libssl.so.6: Undefined symbol
EVP_idea_cbc
I am using openssl-0.9.8k_5 from the base
On Jan 29, 2010, at 12:22 PM, Ronny Forberger wrote:
Thanks for the help. I installed from a binary package using pkg_add
- -r openssl since I cannot build openssl from ports:
[r...@sonne ~]# portupgrade -f openssl
** Port marked as IGNORE: security/openssl:
is marked as broken: No
Hi--
On Jan 29, 2010, at 12:45 PM, mikel king wrote:
[ ... ]
I would have thought that perl was rebuilt when I make the world and upgraded
from 7.x to 8.0.
Anyone have a quick and easy fix out of this mess?
perl isn't part of FreeBSD 7.x; hence, it was not rebuilt when you upgraded to
On Jan 28, 2010, at 9:11 AM, Anton Shterenlikht wrote:
Because your carefully crafted local .mc files shouldn't be clobbered
whenever freebsd.mc is updated?
I see.. so you are saying that freebsd.mc shouldn't even be
touched at all, all local chages should be made straight
to local .mc?
On Jan 27, 2010, at 10:24 AM, James Smallacombe wrote:
NOTE: Please reply off-list as well as I am not subscribed
OK. In return, please don't cross-post or multi-post the same question to
multiple FreeBSD lists.
My server (7.2-STABLE) suffered at least two outages Sunday through yesterday
Hi--
On Jan 27, 2010, at 1:15 PM, James Smallacombe wrote:
Jan 26 21:50:32 host named[667]: client IP REMOVED#57938: error sending
response: not enough free resources
Jan 26 21:50:32 host named[667]: client IP REMOVED#59830: error sending
response: not enough free resources
Were these
Hi--
On Jan 27, 2010, at 1:49 PM, Iv Ray wrote:
If we are more interested in stability than in features and performance -
a) Is FreeBSD 8.0 the right for us, or shall we rather go for FreeBSD 7.x?
Pretty much by definition, the stability of a .x release is better than that of
a .0 release.
Hi--
On Jan 22, 2010, at 12:01 PM, Chris Peiffer wrote:
Or is there a good way to do it in the kernel that I'm missing, and
can someone direct me to an ipnat ruleset that creates new
connections, so the TCP forwarding machine doesn't also need to be a
router?
I don't know about ipnat, but
Hi--
On Jan 22, 2010, at 12:21 PM, Adam Vande More wrote:
A few lines in python should do what you're looking for, see socket lib,
twisted if you have high performance needs.
I'm a big fan of python, but you'd have to be careful to choose the right
processing model-- some sort of
Hi--
On Jan 21, 2010, at 9:27 AM, John wrote:
This used to be a hot topic long ago, but now seems to have become
rather dormant. Does that mean that all NICs are pretty much
commodity with all the good features (unaligned scatter/gather,
etc), or does it just mean that machine performance
On Jan 21, 2010, at 10:20 AM, John wrote:
[ ... ]
Thanks! That's perfect. I have a chance to buy a few Intel Pro
10/100 (fxp) cards. I guess I'll take it!
If you don't need gigabit, the fxp cards are great-- very reliable and some
even support interrupt mitigation in firmware (which
Hi--
On Jan 20, 2010, at 12:46 PM, Doug Poland wrote:
Thanks for the suggestion and the pointer to man 5 core. I
implemented your suggestions but still get no core dump. Very
strange...
Check your default resource limits (shell startup files /etc/login.conf) and
see whether coredumpsize
Hi--
On Jan 20, 2010, at 1:24 PM, Doug Poland wrote:
% sysctl -a | grep core
kern.corefile: /var/coredumps/%U/%N.core
Does /var/coredumps/doug and/or /var/coredumps/clamav exist and have
appropriate permissions (or be 1777 like /tmp to avoid a problem with that)...?
--
-Chuck
Hi--
On Jan 19, 2010, at 10:04 AM, Doug Poland wrote:
No joy.
# sysctl kern.corefile=/var/crash/clamd.core
# /usr/local/etc/rc.d/clamav-clamd start
Starting clamav_clamd.
Segmentation fault
# ll /var/crash
total 2
-rw-r--r-- 1 root wheel 5 Apr 10 2005 minfree
Please see man 5
On Jan 19, 2010, at 5:05 PM, Diego Montalvo wrote:
Been using FreeBSD for a long time now, but have never really been
sure if FreeBSD needs to be restarted after installing a Port or Ports
using make install clean? What is the best practice... Used to
restarting Windows for everything...
The
On Jan 15, 2010, at 10:12 AM, davidowe...@yahoo.co.uk wrote:
Can i install free bsd on a Window's 98 machine and what do i need on the
machine to set it up as a server and what software and hardware does it need
FreeBSD is an operating system; you would run it instead of Windows, although
if
Hi--
On Jan 15, 2010, at 12:27 PM, gahn wrote:
I booted the system into single user mode and tried to clean up one of my
corrupted file system:
fsck -y /dev/ad1s1f
but in the end, the file system is still dirty. anything else I can do to
salvage the data?
You're not providing enough
Hi--
On Jan 13, 2010, at 1:52 PM, sbre...@hotmail.com wrote:
Anyone has got an idea how this can be resolved? Thanks.
Does FreeBSD even support NFS-exporting a locally mounted MS-DOS filesystem?
Traditionally, NFS was implemented over the default UFS filesystem and it was
common for other
Hi--
On Jan 13, 2010, at 4:20 PM, Kaya Saman wrote:
It didn't work so I tried to cut down areas which I suspected might not work
and ended up with the syntax below for root:
crontab -l shows:
@reboot root/usr/local/sbin/logwatch.pl
02 4 * * * root
Hi--
On Jan 12, 2010, at 6:17 AM, Anton Shterenlikht wrote:
Should the Active memory, as reported by top(1), be equal to the
sum of rss (the real memory (resident set) size of the process)
of all processes, as reported by ps(1)?
No. They aren't measuring the same thing; in a system with
On Jan 11, 2010, at 9:45 AM, David Banning wrote:
I wonder if there is something in the ports that tests my DSL speed.
I am guessing that if I installed firefox3 and then installed flash
or Java then I could go to speedtest.net, but I wonder if there is
a simpler solution.
You can use ftp
Hi--
On Jan 11, 2010, at 10:43 AM, Paul Halliday wrote:
Is this warning as harmful as it sounds:
WARNING: Non-uniform processors.
WARNING: Using suboptimal topology.
More info:
CPU: Intel(R) Xeon(R) CPU E7330 @ 2.40GHz (2304.83-MHz 686-class
CPU)
ACPI APIC Table: VRTUAL
Hi--
On Jan 7, 2010, at 8:55 AM, John Almberg wrote:
I'm installing Apache22 on a new server and for once, I'd like to install
just the modules I need, instead of the default mess.
I've been googling for this answer, but can't seem to find it: Are any apache
modules *required*? Or can I
Hi--
On Dec 18, 2009, at 9:24 AM, Steve Polyack wrote:
I haven't used Xen, but for ESX: I may be wrong, but I'm pretty sure that
the vmtools available for FreeBSD do not support synchronizing the host time
to the guest OS. I know it is supported (and works) for Linux, but by what
discussed on the NTP pool timekeepers list:
Begin forwarded message:
From: Chuck Swiger cswi...@mac.com
Date: October 14, 2009 2:43:08 PM PDT
To: PGNet Dev pgnet.dev+...@gmail.com
Cc: timekeep...@fortytwo.ch
Subject: Re: [time] what significance does the number 3.906 have in ntp?
On Oct 14, 2009
Hi--
On Dec 17, 2009, at 1:26 PM, Erik Norgaard wrote:
FreeBSD 8.0-RELEASE-p1 #0: Fri Dec 11 11:53:19 CET 2009
norga...@localhost:/usr/local/obj/usr/local/src/sys/GENERIC
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: VIA Nehemiah (800.04-MHz 686-class CPU)
Origin = CentaurHauls
Hi--
On Dec 9, 2009, at 10:44 AM, Peter Steele wrote:
Add my name to the list--we get tons of these messages since upgrading to
8.0
This isn't new with 8.x; it's been around since 4.0, if not earlier.
For a long time, BIOSes using the older C/H/S addressing mechanism were limited
to
On Dec 8, 2009, at 9:42 AM, Robert Huff wrote:
STARTTLS=server, error:
SSL_CTX_use_PrivateKey_file(/etc/mail/CA/private/cakey.pem) failed
appears in the log. The file exists and has permissions 0600.
What am I probably looking at, and how do I find more specific
information
Hi--
On Dec 8, 2009, at 1:10 PM, Robert Huff wrote:
Make sure none of the directories in that path have 022 perms
(go+write).
Checked, and not the problem.
Well, the error is coming from /usr/src/contrib/sendmail/src/tls.c, and depends
on openssl to deal with your cert. Does:
On Dec 2, 2009, at 12:10 PM, Коньков Евгений wrote:
Can I change dst IP in packet with IPFW?
Normally this was done using natd's redirect_address capability. In newer
versions of FreeBSD, IPFW has grown internal support for doing nat redirects
without using the userland natd; for example, see
Hi--
On Dec 2, 2009, at 2:24 PM, Коньков Евгений wrote:
Actually I have google clue: http://gara.opennet.ru/http_redirect.html
but it is impossible to implement that with IPFW NAT.
And now -a and -proxy_only are exclusive but in article as you can sen
in examples they are not. article is
On Dec 1, 2009, at 3:02 PM, Gary Kline wrote:
hey, mail gurus, how is this possible? thru evolution::
This is a receipt for the mail you sent to
x...@msn.com at 12/1/2009 12:43 PM
This receipt verifies that the message has been displayed on the
recipient's computer at 12/1/2009 1:55 PM
On Dec 1, 2009, at 4:03 PM, Gary Kline wrote:
Most mail user agents have an option to enable read receipts; they use (or
abuse) the DSN or MDN capabilities of the recipient's MTA or MUA. They are
not a reliable signal that a human has seen the mail, although they can be
used to confirm it
Hi--
On Nov 20, 2009, at 11:06 AM, James Phillips wrote:
Last time I was looking for a mouse, I could not find a PS/2 version. I was
reluctant to get a USB mouse because none of them are USB Certified
(http://www.usb.org). Many of them also had a Side-scrolling scroll wheel
(designed with
Hi--
On Nov 20, 2009, at 12:24 PM, Jerry wrote:
It's quite possibly to your credit that you've actually checked
whether a USB mouse has been tested as compliant, but when I do a
search for Mice/trackballs/pointers, I get 68 results, including a
dozen or so from both Logitech and Microsoft.
Hi--
On Nov 17, 2009, at 7:51 AM, Ian Smith wrote:
[ ... ]
For instance, I've got two Fujitsu 5400rpm 2.5 drives in two laptops,
one MHV2040AH with near 19,000 hours on it, and a much newer
MHV2120AH,
40 and 120GB respectively. Nice quiet low-power laptop drives, fwiw.
Both show as (more
Hi, all--
On Nov 17, 2009, at 10:27 AM, Bill Moran wrote:
[ ... ]
Not all power supplies are created equal. Unfortunately, there's
no government oversight on power supply ratings, thus a cheap 450W
power supply might go unstable if it has to supply 200W for very
long, whereas a good quality
Hi--
On Nov 17, 2009, at 12:28 PM, Polytropon wrote:
V12N : +0.97 - Reference -12.0 Volt
V50N : +1.99 - Seems to be reference -5.0 Volt, but looks
strange
As you can see in relation to your output, your board seems
to put other values on the default named output lines, e. g.
Hi--
On Nov 17, 2009, at 4:32 PM, Brett Glass wrote:
I'm building a FreeBSD router based on a small, Intel Atom-based
board and am trying to decide whether or not to configure the kernel
for polling. What's the current state of interface polling in
FreeBSD? Is it worth doing with a single
Hi--
On Nov 13, 2009, at 12:15 PM, James Phillips wrote:
I initially set the time-out to 60 seconds, then 300 seconds in a
vain attempt to see the actual power savings. With a 900 second time-
out, the drive only spun down once in the past 12 hours.
It appears that syslogd can defer *one*
Hi, David--
On Nov 13, 2009, at 2:48 PM, David Allen wrote:
There are options available in /etc/defaults/rc.conf to do just that,
but how does one copy over the contents of /var at system boot?
I'd consider adding something to /etc/rc.d/mountcritlocal (which
normally mounts the local
Hi--
On Nov 13, 2009, at 3:54 PM, David Allen wrote:
I'd consider adding something to /etc/rc.d/mountcritlocal (which
normally mounts the local filesystems) to setup a RAMdisk on /var and
then do rsync -a /var_template /var (or use a dump/restore or tar
pipeline).
At the risk of sounding
Hi--
On Oct 30, 2009, at 2:49 PM, Yuri wrote:
I am getting these errors in messages:
Oct 30 14:37:20 eagle mountd[4243]: can't change attributes for /usr/
local
Oct 30 14:37:20 eagle mountd[4243]: bad exports list line /usr/local
-maproot
Oct 30 14:37:20 eagle mountd[4243]: can't change
Hi--
On Oct 30, 2009, at 3:09 PM, Clayton Wilhelm da Rosa wrote:
I made the dowmload of FreeBSD 7.2 ia64 i wanna know if is normal
the files of disc 2 and 3 have only 364Kb size.
Do you actually have an Itanium processor? They were pretty much only
used in high-end multi-CPU enterprise
On Oct 30, 2009, at 4:17 PM, Yuri wrote:
The workaround suggested in this PR eliminates the messages, but
causes client to get Permission denied message
Because the modified mount points are for different nets.
Assuming /usr/diskless, /usr/local, and /usr/home are all on the same /
usr
On Oct 26, 2009, at 10:03 AM, Ray Still wrote:
Hello,
I am adding a redundant Internet connection to my current hosting
setup and
I need to figure out how to set up the DNS to make this work.
The two issues normally aren't related.
If both connections are from the same provider, talk to
Hi, Chris--
On Oct 26, 2009, at 3:43 PM, Chris Whitehouse wrote:
Some mailing lists I am on automatically insert the mailing list
name in square brackets into the subject line. I find this quite
useful for setting up filters in thunderbird to drop different lists
into different 'folders'
Hi--
On Oct 23, 2009, at 9:18 AM, Sean Cavanaugh wrote:
worse, it's illegal.
how is this illegal? if you are residing your domain on a hosting
service, this makes sense to me. Granted its bad form and should
have an A record to the host for the main domain record, but if i
had control
On Oct 23, 2009, at 10:31 AM, Matthew Seaman wrote:
You aren't supposed to use CNAMES for anything found in other RR's;
in particular, you should always use an A record with the hostnames
used for nameservers (ie, have an NS record), because you are
supposed to be using the canonical name
Hi, DAS15--
On Oct 22, 2009, at 4:23 PM, da...@hushmail.com wrote:
got the latest version of your os for 64 bit systems from osdisc.com
do you think you could throw in an auto install feauture that like
every other os on the market i dropped out of devry and i still
cant figure out what the
On Oct 21, 2009, at 12:28 PM, Chad Perrin wrote:
How does one undo a `make deinstall` when `make reinstall` fails?
Do you have a package of this port handy?-- try doing a pkg_add of
that...
--
-Chuck
___
freebsd-questions@freebsd.org mailing
Hi--
On Oct 21, 2009, at 12:40 PM, Chad Perrin wrote:
On Wed, Oct 21, 2009 at 12:38:48PM -0700, Chuck Swiger wrote:
On Oct 21, 2009, at 12:28 PM, Chad Perrin wrote:
How does one undo a `make deinstall` when `make reinstall` fails?
Do you have a package of this port handy?-- try doing
On Oct 20, 2009, at 1:31 PM, Noah wrote:
and the build strategy used is:
./configure --with-ssl make sudo make install
what am I doing wrong?
You're building stuff yourself without looking at how the ports
maintainer already solved this issue. Try doing ./configure --with-
ssl=/usr or
On Oct 20, 2009, at 1:35 PM, Noah wrote:
I have a server with minimal disk space. is there a way to build
from ports without downloading ports or only downloading what is
needed for the build and then it is removed?
You're describing the default behavior of ports-- it only downloads
On Oct 13, 2009, at 10:33 AM, Martin Turgeon wrote:
I would like to know if anyone knows the reason why I get a lot of
connections (more than 100) from the same IP in FIN_WAIT_2 state.
That IP is probably running a web proxy or possibly some kind of
spider. It could also be malicious,
On Oct 10, 2009, at 9:34 AM, Jerry wrote:
On Sat, 10 Oct 2009 10:53:35 -0400
Lowell Gilbert (freebsd-questions-lo...@be-well.ilk.org) replied:
Unfortunately, it's under an unacceptable license.
I was not aware of that. What is the problem?
Somewhere around binutils-2.17, it switched to
On Oct 10, 2009, at 10:55 AM, Jerry wrote:
That's not a bad idea, although you can likely export PREFIX=/usr and
install the binutils port, and get the desired result.
The only problem with that is that it would get over written when
updating 'world'. I am not sure if a user could exclude
Hi--
On Oct 7, 2009, at 8:11 AM, David Southwell wrote:
[Wed Oct 07 16:03:17 2009] [warn] RSA server certificate is a CA
certificate
(BasicConstraints: CA == TRUE !?)
[Wed Oct 07 16:03:18 2009] [warn] RSA server certificate is a CA
certificate
(BasicConstraints: CA == TRUE !?)
Hi--
On Sep 11, 2009, at 12:42 PM, John Almberg wrote:
My basic problem is at peak usage times (usually in the afternoon),
the server starts using swap space, and then response times really
bog down.
Limit the MaxChildren to the number of Apache httpd's which your
machine can actually
On Sep 10, 2009, at 7:58 PM, John Almberg wrote:
My Apache 2.2 instances are running about 18 Meg each. I've been
thinking about doing something to trim these down, and I think
tomorrow is the day to take action. They are getting out of hand.
[ ... ]
But what about the set that is left after
Hi, Peter--
On Sep 8, 2009, at 2:51 PM, Peter Steele wrote:
Are there any advantages to using mdconfig and creating a virtual
disk for swap space as opposed to having a designated swap
partition? For example, I could do something like this:
mdconfig -a -t swap -f /var/swap0 -s 4g
swapon -a
On Aug 17, 2009, at 2:22 PM, Chris Stankevitz wrote:
When I install FreeBSD, I am installing a core operating system
version number (your term).
Most people install FreeBSD from a release CD; ie, they install 6.4-
RELEASE, or 7.2-RELEASE, or similar.
Then I may choose to install the ports
On Aug 17, 2009, at 3:39 PM, Chris Stankevitz wrote:
Chuck Swiger wrote:
If you just want security updates and no other changes, you'd
update against RELENG_7_2 instead.
Here are you referring only to security updates to the core OS and
not applications in ports such as Firefox?
That's
On Aug 17, 2009, at 3:08 PM, Chris Stankevitz wrote:
Chuck Swiger wrote:
Ports are not branched-- there is no STABLE or CURRENT for ports.
The same ports tree can be used on 6.x, 7.x, and 8-CURRENT.
1. With what is the STABLE/CURRENT tag associated?
a) core operating system version number
b
On Aug 17, 2009, at 7:27 PM, RW wrote:
On Mon, 17 Aug 2009 17:41:12 -0500
Andrew Gould andrewlylego...@gmail.com wrote:
STABLE is what it sounds like.
I don't think it is what it sounds like - STABLE branches are
development branches with stable binary interfaces. It's the security
branches
301 - 400 of 2102 matches
Mail list logo