At 08:06 25.06.2003 +0700, Roger Merritt wrote:
At 07:33 AM 6/25/03, you wrote:
other than zope - are there any good onlin content management tools out there
that allow people to update webpages and cgi code easily?
I'm just in the process of installing one called Pagetool
On Tue, 24 Jun 2003 19:52:33 -0500
Dan Nelson [EMAIL PROTECTED] wrote:
In the last episode (Jun 25), Robert Storey said:
On 25 Jun 2003 00:12:57 +0200 Christian Laursen [EMAIL PROTECTED]
wrote:
Robert Storey [EMAIL PROTECTED] writes:
When I had 5.0, I could easily boot FBSD from GRUB
Hi
I'm setting up a Squid cache running on latest 4.8 release
and I wondering about disk write performances as it is
a crucial point on that kind on machine.
My question : does softupdate slow down disk writes ?
Thanks a lot
___
[EMAIL PROTECTED]
--On 24 June 2003 17:01 -0700 Shawn Ramsey [EMAIL PROTECTED] wrote:
Try looking into FreeBSD's polling mode - i.e. interrupt free Network
cards. If your shifting a lot of small packets (such as online gaming
stuff etc.) - you may find your milage pretty limited using standard PC
kit - as the
On Wed, Jun 25, 2003 at 08:23:46AM +0300, Benzi Mizrahi wrote:
áéåí øáéòé, 25 áéåðé 2003, 01:27, Gary Kline ëúá:
On Tue, Jun 24, 2003 at 10:05:51PM +0100, Matthew Seaman wrote:
On Tue, Jun 24, 2003 at 12:42:21PM -0700, Rev. Joe Doyle Ardent wrote:
Marco Trentini wrote:
Vincent Chen
Good day!
My name is Rauf Aliev, business of me is distributing latest versions of
free software and snapshots of my partners' websites by federal post system.
I ready to distribute lastest software from FreeBSD.org using our system
in the Russia. We have specialized web-resource www.nadiske.ru
Hi,
We run a NetApp F840 filer with a 350GB volume which is mounted by our FreeBSD
4.x clients using NFSv3.
Today it seems that two fopen() calls for the same file on that mounted volume
yielded file streams associated with two different files.
Two different processes on the same host, run at
User Frankb wrote:
Hi
I'm setting up a Squid cache running on latest 4.8 release
and I wondering about disk write performances as it is
a crucial point on that kind on machine.
My question : does softupdate slow down disk writes ?
No. It's very likely to speed them up.
--
Bill Moran
Potential
On Sun, Jun 15, 2003 at 09:13:10PM -0800, Thanjee Neefam wrote:
I like being able to browse to www.debian.org/security and to know that
on certain days as many as 5 patches are released. And that with a
single command I can apply all the patches I need.
Now, FreeBSD has a similar page
That's certainly a step in the right direction :)
But something is still very
wrong performance wise. It has helped, but I still can't push in/out
nearly 100Mb/sec. (100Mb in, 100Mb out I mean). A simple FTP transfer
locally through the routers gigabit interface causes our internet
User Frankb wrote:
Hi
I'm setting up a Squid cache running on latest 4.8 release
and I wondering about disk write performances as it is
a crucial point on that kind on machine.
My question : does softupdate slow down disk writes ?
What you *really* want to do is put the disk cache on a second
Karl Pielorz wrote:
[...]
Or, secondly - as was cleverly suggested to me a while ago - setup a 3rd
MX that has a IN A PTR to your primary MX, and make it the highest
priority...
e.g.
mx0.mydomain.com PRI 20
mx1.mydomain.com PRI 30
mx2.mydomain.com PRI 40 (Which is really just a
Hi all,
I have two questions releated to spamass-milter on my FreeBSD box:
1. How do I get rid of these errors?
Jun 25 13:54:15 server sendmail[52687]: h5PBs8Xv052687: Milter
(spamassassin): local socket name /var/run/spamass-milter.sock unsafe
Jun 25 13:54:15 server sendmail[52687]:
On Tue, Jun 24, 2003 at 10:57:01PM -0500, Eric Dedrick wrote:
I'm running 4.8 and XF86 Version 4.2.1.
DPMS isn't working right on my new machine (ASUS A7A266 motherboard).
1. The monitor is capable of doing DPMS
2. DPMS works fine when the monitor is just displaying a text console
3.
Hi folks.
I'd appreciate any comments on the pros and cons of configuring an alias
IP on the loopback interface. I've tried it and it works OK, but
perhaps there are repercussions that have not occurred to me.
Why? Well I have a number of BSD gateways, each of which has numerous
interfaces,
Here's the answer to my own question:
I had to compile an OLDCARD kernel and reboot.
I also had to switch the BIOS setting from cardbus to PCIC compatible mode.
Everything is working OK now.
Terry Todd
On Mon, Jun 23, 2003 at 06:18:37AM -0500, Terry Todd wrote:
I just tried 5.1-RELEASE on a
Hi,
I am trying to port the Linux i810 DRI kernel module to FreeBSD and am having
some difficulty recognising that the device is present in the system. As I
understand it, the list of unattached devices is passed to the probe method
of a PCI kernel module so that the module can decide whether
On Mon, 23 Jun 2003, Gagan Grewal wrote:
Hi Folks :)
I am trying to write a simple a server process which follows this sequence...
socket()
bind()
listen()
accept()
.
.
.
close( descriptor from accept() )
close( descriptor from socket() )
But I am getting
Guy,
I won't help much solve the problem.
All I want to say, is that I see the same thing on my system
(FreeBSD 4.8 with up-to-date-from-ports Xfree and other software).
I have a regular monitor, SamSung SyncMaster 20GLsi.
Indeed it only blanks. When I do xset dpms force off in my X-display,
Hello,
I am planning to develop a multiuser game. Its kinda blind-board simulator.
There are many
controls to use for each player, and thus each player needs a complete
keyboard unit. Thus
I need to use multiple keyboard simultaneously with a single PC. The game
can be played
between more than
I use mimedefang and get this error when it is not running. Its my
understanding that the definition in your .mc file is to tell sendmail where
to look to get a pid for the milter so that it can pipe a message through
it. The milter needs to be started before sendmail.
Try doing the following:
My system seems to be having problems creating log files:
Ku uname -a
FreeBSD KualaLumpur.cs.monmouth.edu 4.6-RELEASE FreeBSD 4.6-RELEASE #0:
Tue Jun 11 06:14:12 GMT 2002
[EMAIL PROTECTED]:/usr/src/sys/compile/GENERIC i386
Ku ls -ld /var/log
drwxr-xr-x 3 root wheel 1536 Jun 25
On Wed, Jun 25, 2003 at 02:05:04PM +0200, Andreas Widerøe Andersen wrote:
Hi all,
I have two questions releated to spamass-milter on my FreeBSD box:
1. How do I get rid of these errors?
Jun 25 13:54:15 server sendmail[52687]: h5PBs8Xv052687: Milter
(spamassassin): local socket name
I am putting together a FreeBSD samba box and need to get the arcserve
client agent loaded on this box
but when I run the rpm command rpm -I uangent.rpm
I get this output
/bin/sh is needed by uagent-7.0-1
ld-linux.so.2 is needed by uagent-7.0-1
libarclic98_api.so is
I have the following in /etc/syslog.conf. Notice lines (1) and (3).
I want to log news.notice ONLY in /var/log/news/news.notice but instead of
that I have the same output both in /var/log/news/news.notice and
/var/log/messages. If I remove *.notice from line (3) I am afraid that I
would not log
what is this error (this error about XWindows) DCOPSERVER?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Does anyone know when a driver for the Realtek RTL8201 PHY will be out? I have an Epox
nforce2 board with onboard nic that's not usable on FreeBSD 4.8, it doesn't recognize
it at all, and on FreeBSD 5.1 it comes up as Unknown Ethernet Controller and doesn't
work.
Dave
Hello!
Is there any way to make my Canon BJC-2100 work under freebsd 4.8???
If it's possible, please point me to doc's, manuals or etc.
lp(1) and friends work just fine with this printer. If however you'd like
more extensive printing capability; check
http://cups.sourceforge.net
install
Hi, I have been trying to install the mod_jk or mod_jk2 tomcat connectors
from /usr/ports/www/mod_jk(2). Unfortunately I get an error during the
build of either one. I have an up to date ports collection. Has anybody
else got this to work? Iff so then how?
/bin/sh
I have a Mylex AcceleRAID 160 with 2x 72GB U160 scsi harddrives. I had setup a RAID 1
with the raid card on the two drives, I installed freebsd on the drives without a
problem, however when I start freebsd back up both hd lights are solid as if they're
working like crazy. I then took the
Just a simple yes or no question:
Under 5.1, is the nsa0 device the no rewind tape device, equivalent to
nrsa0 under 4.x?
Background is I'm trying to set up amanda, and tape device is the last
peice of the jigsaw!
Many thanks,
Jon Mercer
___
[EMAIL
Hi,
I need some assistance to do a lookup from a Textfile of active users, and
then remove the Non-Active users (non listed users in Textfile) and
associated info, from the Radius USERS file.
We are running:
I've installed Majordomo from the ports and it runs using sendmail. I got an
error message saying that resend couldn't write in
/usr/local/majordomo/lists because it was 'wold writable'. When I restrict
write privileges then I get 'permission denied' when it tries to create a
temporary lock file
On Tue, 24 Jun 2003, Kris Kennaway wrote:
On Tue, Jun 24, 2003 at 06:08:13PM -0300, Konrad Scorciapino wrote:
Hello,
I want to install the stable version of gimp with the package
system, however, after checking the FreeBSD's main ftp site, I've only
found the unstable version. Where
On Tue, Jun 24, 2003 at 08:14:51PM -0400 or thereabouts, Brian McCann seemed to write:
Ok...I'm having a small panic. I have a server that I just got a 180GB
IDE HD forbut the controller cards I have don't support drives over
137GB, so I had to use the one Western Digital gave me. Once I
Guess, I'd better get some sleep. Been at this for two
day now. The only error mesg I get from
/var/log/messages is:
smtpd_recipient_restriction :specify at least one
working instance of check_relay_domains,
reject_unauth_destination, reject defer,
defer_if_permit. Attach is some configs to help
I have a SpeedTouch 330 USB ADSL modem which I am trying to connect to
Qwest's ADSL (PPPoA). I am running FreeBSD 4.2, and all I can find in the
docs is support for a SpeedTouch USB, not the 330. Though, on the
SpeedTouch website, it says it supports Linux, which means that somebody has
most
I have a P-200 running 4.8-STABLE running as a NAT box at home. It runs
well, except that periodically it will drop it's connection on the
internal side of the network. The external interface still works, but the
internal machines can't ping the NAT box at all and the NAT box can't
ping the
As stated in the subject:
I have a Gainward GeForce 4 PowerPack graphiccard with integrated
TV-out. I haven't been able to find any drivers for this card and wonder
if anyone else has done any research in this matter.
I'm only interested in getting the TV-out function to work, I don't even
have
was just trying to determine the maximum string length of a group
name.
found
struct group {
char*gr_name; /* group name */
but no size.
any pointers (with limits)?
--
David Bear
phone: 480-965-8257
fax:480-965-9189
College of Public Programs/ASU
Wilson Hall 232
Further information:
It's based on the MX 440-SE G-Force 4 technology.
On Wed, 2003-06-25 at 20:22, freeBSD wrote:
As stated in the subject:
I have a Gainward GeForce 4 PowerPack graphiccard with integrated
TV-out. I haven't been able to find any drivers for this card and wonder
if anyone
On 25/06/03 13:34 -0500, Gene Bomgardner wrote:
Check IP addresses. Do you use dhcp? Is the f-bsd box the server? I've had
this problem when dhcpd stopped and the windoze machines assigned their own
ip's
I have to use dhcp on the external interface, but the internal
interfaces use static
I just upgraded to 5.1-RELEASE last night. I have a Jungsoft Nexdisk USB
memory stick that is being successfully recognized. Since I want the
memory stick to be usable by users of group operator, I need the
/dev/da0s1 device to be mode 0664. Then they can mount the device on
one of their own
Anyone else had this problem?
All of my Freebsd boxes 4.6-4.8 connect to my Solaris 8 NIS servers with
out any troubles. They are able to authenticate and get all the maps
that they need in order to operate. However, I have never been able to
change my NIS password from them. Eventhough
has anyone worked with this? we can get it to work fine on a desktop, but
as soon as we try to do anything with it inside of jail, auth fails and
the errors don't help much :(
___
[EMAIL PROTECTED] mailing list
In the last episode (Jun 25), Justin Burdine said:
Anyone else had this problem?
All of my Freebsd boxes 4.6-4.8 connect to my Solaris 8 NIS servers
with out any troubles. They are able to authenticate and get all the
maps that they need in order to operate. However, I have never been
In the last episode (Jun 25), Marc G. Fournier said:
has anyone worked with this? we can get it to work fine on a
desktop, but as soon as we try to do anything with it inside of jail,
auth fails and the errors don't help much :(
Try ktracing or trussing the login process; maybe it's trying to
Dan Nelson wrote:
What error do you get?
I get the same error that was mentioned in the posting below. I get it
when I run as either root or user.
#yppasswd burdine
Changing NIS password for burdine on zan.
Old Password:
yppasswd: sorry
When I went parusing through the source I found where
Hi there!
I need a help to investigate a problem with my SCIS disks or cards.
Can someone tell me please what doest this error indicate?
Jun 25 13:53:22 prioris /kernel: (da3:ahc0:0:5:0): SCB 0x15 - timed out
Jun 25 13:53:22 prioris /kernel: Dump Card State Begins
Jun 25 13:53:22 prioris
On Wed, Jun 25, 2003 at 03:19:16PM -0400 or thereabouts, Dragoncrest seemed to write:
Anyone know of a freeware PC hardware diagnostic and testing app
that can be used for troubleshooting and burn in on new systems? I'm sure
someone in the linux community has to have written
On Wed, Jun 25, 2003 at 03:19:16PM -0400, Dragoncrest wrote:
Anyone know of a freeware PC hardware diagnostic and testing app
that can be used for troubleshooting and burn in on new systems? I'm sure
someone in the linux community has to have written something that will do
Ok i fixed my subject a bit.
Well I've tried FreeBSD (4.4, 4.8, 5.0), SuSE Linux 8.1, Redhat 9.0.
All these operating systems fail to detect the hdd and when trying to load the
scsi drivers for it it gives timeout errors (redhat suse).
FreeBSD gives: (noperiph:sym0:0:-1:-1):SCSI BUS reset
On Wed, Jun 25, 2003 at 04:14:07PM +0200, Etienne Ledoux wrote:
Ok i fixed my subject a bit.
Well I've tried FreeBSD (4.4, 4.8, 5.0), SuSE Linux 8.1, Redhat 9.0.
All these operating systems fail to detect the hdd and when trying to load the
scsi drivers for it it gives timeout errors
Konrad Scorciapino wrote:
Even here?
he's trolling for links to boost his google page ranking
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
selfghe edherh wrote:
what is this error (this error about XWindows) DCOPSERVER?
Without more details, it's hard to be more specific than:
DCOPSERVER is part of KDE. If you replace KDE with Gnome or some other window manager,
you'll stop seeing the errors.
Personally, I noticed them going away
I've installed Majordomo from the ports and it runs using
sendmail. I got an error message saying that resend couldn't
write in /usr/local/majordomo/lists because it was 'wold
writable'. When I restrict write privileges then I get
'permission denied' when it tries to create a temporary
Dragoncrest wrote:
hi all. I've got a little proof of concept idea I want to do and I
was looking to get some advice from some of the CGI experts on this list
to help me with it. What I want to do is simple. I have like 3 users I
want to track and retrieve the following stats on.
1.
I've recently tried to install both 5.1 Release and 4.8 Release on a Toshiba
laptop and I get this error:
panic: contigmalloc1: size must not be 0
during boot up (see full boot text below). 4.8 will actually install fully
before giving this error, but 5.1 won't even get that far. From doing
CH == Chris Hill [EMAIL PROTECTED] writes:
CH Lots of people recommend godaddy.com, but I've been using gandi.net.
CH They will host your DNS free. It's 12 euro per year, and you can do all
I use gandi as well, however for the last 2 months or so their support
line has been a black hole (well,
At 04:26 PM 6/25/2003, you wrote:
selfghe edherh wrote:
what is this error (this error about XWindows) DCOPSERVER?
I had a similar trouble way back when. Take a look at this message
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=1790237+0+archive/2001/freebsd-questions/20010805.freebsd-questions
That seemed to work for me.
Thanks for the insight!
-Original Message-
From: Lukasz Ciazynski [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 10:52 AM
To: Schroeder, Aaron
Cc: '[EMAIL PROTECTED]'
Subject: Re: FW: closed stream message when attempting portupgrade
Schroeder, Aaron
What kind of video is in that laptop? Sounds like the kernel is that
you are booting in the 4.8 case is the GENERIC. If you can get the
rescue disk to boot to single user mode, you should compile and install
a kernel that has the kernel debugger compiled in.
just a quick look there are several
Joshua Oreman suggested I try bt while in gdb looking at the
core files. The output from that command was:
for vim.core:
#0 0x2815a26b in memset () from /usr/libexec/ld-elf.so.1
Cannot access memory at address 0xbfbfe6e0.
for xinit.core:
#0 0x2805826b in memset () from
The laptop has a Trident CyberBlade Ai1 chipset, 8Mb RAM.
If I go through the 4.8 Installation from the CD (which goes smoothly until
I reboot), if I try to set up X using the graphical display the system locks
up hard. That may be a driver issue or it may be related to the
contigmalloc1 panic
Bill Moran [EMAIL PROTECTED] wrote:
Can you rule out hardware problems? Possibly a disk going bad?
I hope you've been making backups. You didn't run fsck while
the partition was mounted, did you? If so, umount the
partition and run fsck until it reports no errors and see if
that fixes
On Wed, Jun 25, 2003 at 05:49:30PM -0400 or thereabouts, David S. Jackson wrote:
Joshua Oreman suggested I try bt while in gdb looking at the
core files. The output from that command was:
for vim.core:
#0 0x2815a26b in memset () from /usr/libexec/ld-elf.so.1
Cannot access memory at
Is there any reason ifconfig will re-order the names of aliases IPs?
Example, in my rc.conf. I have all IPs grouped by network, sorted by IP.
WHen I add them using ifconfig, they wind up in a different order (jumbled).
Everything still works fine, its just screwing my scripts up.
-Grant
Grant
Part 1
I have an old HP NetServer LH Pro that had NetBSD 1.6.1 on it.
The NetServer is a P166, 64MB RAM 2GB SCSI drive(comes up on da0)
Last night I attempted to install FreeBSD 5.1-R. Everything ran smoothly
until I reboot. At the boot loader screen F1: FreeBSD, I hit F1 and it went
to the
Hi.
Owing to the need of purchasing a supported video-card before it's too late
for my 4.6.2, I would like to know if the X Window System driver can run
fine or not the ATI 8500. I have noticed the driver is not listed in the
'sysinstall' tool. If I choose 'ati' using xf86config or editing
I've compiled the kernel and seem to have /dev/crypto available:
hifn0 mem 0xf410-0xf4100fff,0xf4101000-0xf4101fff irq 7 at device 13.0 on pci0
hifn0: Hifn 7951, rev 0, 128KB sram, 193 sessions
114-sec# ls -l /dev/crypto
crw-rw-rw- 1 root operator 70, 0 Mar 1 11:54 /dev/crypto
...but
Hi.
Owing to the need of purchasing a supported video-card before it's too late
for my 4.6.2, I would like to know if the X Window System driver can run
fine or not the ATI 8500. I have noticed the driver is not listed in the
'sysinstall' tool. If I choose 'ati' using xf86config or editing
On Wed, 2003-06-25 at 19:07, Rob Lahaye wrote:
Hi,
I'm running FreeBSD 4.8 with up-to-date software from ports.
Yesterday I upgraded (with portsupgrade) acroread (5.06 to 5.07)
and in the process, I got this message:
[...]
=== Generating temporary packing list
/usr/bin/sed -i '' -E
Just wondering why you are running telnet, and not ssh ?
Jeff.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Fehmi
Sent: Thursday, June 19, 2003 11:47 AM
To: [EMAIL PROTECTED]
Subject: Login problem with Telnetd
I enabled Telnetd in
i find myself needing to run an ftp daemon.
is the stock ftpd with freebsd safe, or are there any recommended
alternatives?
--
David Bear
phone: 480-965-8257
fax:480-965-9189
College of Public Programs/ASU
Wilson Hall 232
Tempe, AZ 85287-0803
Beware the IP portfolio, everyone will be
On Wed, 2003-06-25 at 20:10, David Bear wrote:
i find myself needing to run an ftp daemon.
is the stock ftpd with freebsd safe, or are there any recommended
alternatives?
PureFTPd, if you don't care about all the warez-kiddie extensions. It's
in ports.
--
Adam [EMAIL PROTECTED]
I'm having some problems with FreeBSD on a Compaq Armada m700 (laptop PC).
I installed 4.7-RELEASE from CD on it. It installed fine, but when I
rebooted the PC, FreeBSD didn't recognize the CD/DVD drive.
I rebooted, did a boot -c, looked at the devices, didn't change anything
quited the config
-Original Message-
From: .VWV. [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 25, 2003 7:47 PM
To: [EMAIL PROTECTED]
Subject: ATI 8500 or matrox 550?
Hi.
Owing to the need of purchasing a supported video-card before
it's too late
for my 4.6.2, I would like to know if
I am running 5.0 Release on an i386 Intel system. I have 256MB ram and in /etc/fstab
swap is called out for 492MB. How can I tell if this is mounted and in use? Mount does
not indicate swap (/da0s1b) is mounted.
I ask, as I cannot use dump to backup my raid. My raid is /dev/vinum/raid and
On Wed, 25 Jun 2003 15:55:32 -0700, Remington L. [EMAIL PROTECTED]
wrote:
Part 1
I have an old HP NetServer LH Pro that had NetBSD 1.6.1 on it. The
NetServer is a P166, 64MB RAM 2GB SCSI drive(comes up on da0)
Last night I attempted to install FreeBSD 5.1-R. Everything ran smoothly
until I
When I try to do make buildworld I get this error
/usr/src/usr.sbin/acpi/amldb/amldb.c /usr/src/usr.sbin/acpi/amldb/debug.c
/usr/src/usr.sbin/acpi/amldb/region.c
/usr/src/usr.sbin/acpi/amldb/aml/aml_parse.c
/usr/src/usr.sbin/acpi/amldb/aml/aml_name.c
On Wed, Jun 25, 2003 at 05:10:31PM -0700, David Bear wrote:
i find myself needing to run an ftp daemon.
is the stock ftpd with freebsd safe, or are there any recommended
alternatives?
Yes, it's safe. Check the security advisories for the history of
security problems, and then compare to
On Wed, 25 Jun 2003 20:48:00 -0400, Will Saxon [EMAIL PROTECTED]
wrote:
-Original Message-
From: .VWV. [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 25, 2003 7:47 PM
To: [EMAIL PROTECTED]
Subject: ATI 8500 or matrox 550?
Hi.
Owing to the need of purchasing a supported video-card
On Thu, Jun 26, 2003 at 10:59:32AM +1000, David Lodeiro wrote:
When I try to do make buildworldI get this error
Since you're apparently running 5.1-CURRENT you are required to read
the current and cvs mailing lists before asking for support help.
Kris
pgp0.pgp
Description: PGP
hi all. I've got a little proof of concept idea I want to do and I was
looking to get some advice from some of the CGI experts on this list to
help me with it. What I want to do is simple. I have like 3 users I want
to track and retrieve the following stats on.
1. Total number of total
Hi,
I have a server running 4.8 on a single disk. I'd like to set it up
to mirror and be bootable. Killer performance isn't critical, but
maximal flexibility to frankenstein it together from spare parts is.
So, I'm shying away from hardware raids, and even the pseudo-hardware
raids.
I'd like
On Wed, Jun 25, 2003 at 08:04:38PM -0700 or thereabouts, George Hartzell wrote:
Hi,
I have a server running 4.8 on a single disk. I'd like to set it up
to mirror and be bootable. Killer performance isn't critical, but
maximal flexibility to frankenstein it together from spare parts is.
Joshua Oreman writes:
On Wed, Jun 25, 2003 at 08:04:38PM -0700 or thereabouts, George Hartzell wrote:
[...]
Once it's running, how do I recover if/when a disk pukes. It sounds
like atacontrol's rebuild command only works w/ real controllers.
Do I need to boot from a cd and then
Hi, all
I have tried below
echo this is my testing email | mail -s 1st mail [EMAIL PROTECTED]
but no luck. /var/log/maillog show me that
[EMAIL PROTECTED], ctladdr=pjn (1001/1001), delay=00:00:00, xdelay=00:00:00,
mailer=relay, pri=30040, relay=localhost.mytestdomain.com [127.0.0.1],
Hi, all
I have tried below
echo this is my testing email | mail -s 1st mail [EMAIL PROTECTED]
but no luck. /var/log/maillog show me that
[EMAIL PROTECTED], ctladdr=pjn (1001/1001), delay=00:00:00,
xdelay=00:00:00,
mailer=relay, pri=30040, relay=localhost.mytestdomain.com [127.0.0.1],
On Wed, Jun 25, 2003 at 09:02:22PM -0700 or thereabouts, George Hartzell wrote:
Joshua Oreman writes:
On Wed, Jun 25, 2003 at 08:04:38PM -0700 or thereabouts, George Hartzell wrote:
[...]
Once it's running, how do I recover if/when a disk pukes. It sounds
like atacontrol's
Heya Folks;
I just tried to get s/key support working, I read the hand book
and all it shows is using keyinit as the users to enable there
one time passwords, and then when I login or ftp/etc, it shows
the s/key support line.
But the password's that
91 matches
Mail list logo
