how can I mount the cd-rom under freebsd 4.9 as root
-
Do you Yahoo!?
Yahoo! Hotjobs: Enter the Signing Bonus Sweepstakes
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
# mount /cdrom
# umount /cdrom to unmount
Cheers,
Mazen
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of faina bogdan
Sent: Thursday, January 15, 2004 12:25 PM
To: [EMAIL PROTECTED]
Subject: question
how can I mount the cd-rom under freebsd 4.9 as
On Wednesday 14 January 2004 11:36 pm, Duane Winner wrote:
Thanks for the reply, which was very helpful.
Could you just clarify one thing for me? On your last point regarding
'SECURITY - STABLE - CURRENT', my understanding up to now has been that
this applies to the FreeBSD 'src' tree only,
greetings
i am setting up a ftp server.
since i prefer setting all services within jails, i thought i would
setup ftpd within a jail.
i was basically NATing the required ports to the jails.
i realized that ftpd in passive mode was almost impossible to NAT since
it uses a wide range of ports.
i
Hi
I had four 160G IDE drives in raid5 on a single controller and it worked
just fine, never benchmarked it since it was faster than the network
anyway. But when adding a second controller card and two more drives the
new array has a terrible write performance.
I've tried various stripe and
Duane Winner wrote:
Hello all again,
I'm finally getting my arms around FreeBSD and the updating processes
and tools. But I'm still trying to come up with good
habits/methods/instructions for updating routines for both myself and my
colleagues who also want to switch to FreeBSD.
I now understand
Snmp + Mrtg -- Problems
Hi!
My problem is that when i run the cfgmaker for make the mrtg.cfg
I got this message:
S= NMPv1_Session (remote host: 192.168.0.183 [192.168.0.183].161)
com= munity: private
request ID: -1648810399
PDU bufsize: 8000 bytes timeout: 2s
Hi Lowell,
Many thanks for the suggestion. I'll give it a go and
see what happens (I take it the AGP module isn't
necessary to get a display on the machine?)
Regards,
Ben Craig.
--- Lowell Gilbert
[EMAIL PROTECTED] wrote: Ben
Craig [EMAIL PROTECTED] writes:
I've been running 4.7R on a HP
On Wed, 2004-01-14 at 17:18, Matthew Seaman wrote:
On Tue, Jan 13, 2004 at 09:08:32PM -0700, Rommel B. Ikeda wrote:
Hi,
I do not know if the Subject Name was the right one for it...because I really do
not know what is going on...
I have been seeing this message...
On Thu, 15 Jan 2004, Rommel B. Ikeda wrote:
Thank you very much for the reply...
This was what was in my /etc/hosts before your response...
::1 IBM-R40e [EMAIL PROTECTED]
127.0.0.1 IBM-R40e [EMAIL PROTECTED]
192.168.1.35IBM-R40e [EMAIL PROTECTED]
On Thu, Jan 15, 2004 at 08:15:51PM +0900, Rommel B. Ikeda wrote:
On Wed, 2004-01-14 at 17:18, Matthew Seaman wrote:
On Tue, Jan 13, 2004 at 09:08:32PM -0700, Rommel B. Ikeda wrote:
Hi,
I do not know if the Subject Name was the right one for it...because I really
do not know what
+++ Bryan JJ Buckley [freebsd] [14-01-04 17:54 +]:
| Hi,
| How do I tell FreeBSD 5.1-RELEASE to recognise my
| STMicroelectronics USB Communicator as a umodem, and
| not as a ugen? Yes, I do have umodem and ucom both
| loaded. I have scoured the umodem(4) and ucom(4) man
| pages (which are
after installing 5.2-RELEASE, startx crashed with this error, someone that i
should change the securelevel to '-1' well i did changed it but same error
message i also tried sysctl kern.secureleve=-1 as root but the message is
operation not permitted
XFree86 Version 4.3.0
Release Date: 27
Hiren [EMAIL PROTECTED] writes:
greetings
i am setting up a ftp server.
since i prefer setting all services within jails, i thought i would
setup ftpd within a jail.
i was basically NATing the required ports to the jails.
i realized that ftpd in passive mode was almost impossible to NAT
Your problem is not with FTP, it's with how you have your firewall
Nat configured to handle FTP.
IPFW has punch rule and IPFILTER has ftp built in proxy rule.
In both cases, when they see FTP session start they automatically
create temp rules to allow both passive and active ftp through your
Hi,
I am trying to configure a secure pppoe server.So far it works perfectly with Windows
clients authenticating with MSChapv2. However, if MPPE is negotiated, the client
receives only about 1/4th(30-40 kbytes/s) of the bandwidth available while
downloading.
Download seem 'leapy' : it starts
Jan Grant wrote:
On Thu, 15 Jan 2004, Rommel B. Ikeda wrote:
Thank you very much for the reply...
This was what was in my /etc/hosts before your response...
::1 IBM-R40e [EMAIL PROTECTED]
127.0.0.1 IBM-R40e [EMAIL PROTECTED]
192.168.1.35IBM-R40e
Scott Mitchell wrote:
On Tue, Jan 13, 2004 at 01:16:23PM +0100, Ruben de Groot wrote:
On Mon, Jan 12, 2004 at 11:09:38PM -0600, John typed:
I see that some Microsoft systems send out an update to DNS with
the system name. I configured my DNS server to accept these updates,
but now that I'm
Matthew Seaman wrote:
On Thu, Jan 15, 2004 at 08:15:51PM +0900, Rommel B. Ikeda wrote:
On Wed, 2004-01-14 at 17:18, Matthew Seaman wrote:
On Tue, Jan 13, 2004 at 09:08:32PM -0700, Rommel B. Ikeda wrote:
Hi,
I do not know if the Subject Name was the right one for it...because I
Please don't top-post...
Ben Craig [EMAIL PROTECTED] writes:
--- Lowell Gilbert [EMAIL PROTECTED] wrote: Ben
I've had problems on a machine with a buggy AGP
implementation. Try booting your old kernel,
installing the kernel source, and building a kernel
without the AGP module.
On Thu, Jan 15, 2004 at 03:30:08PM +0200, Gilad Rom wrote:
Scott Mitchell wrote:
On Tue, Jan 13, 2004 at 01:16:23PM +0100, Ruben de Groot wrote:
On Mon, Jan 12, 2004 at 11:09:38PM -0600, John typed:
I see that some Microsoft systems send out an update to DNS with
the system name. I
From: Roger 'Rocky' Vetterberg [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
CC: freebsd-questions [EMAIL PROTECTED]
Subject: Re: How do YOU stay up to date?
Date: Thu, 15 Jan 2004 11:34:45 +0100
Duane Winner wrote:
Hello all again,
I'm finally getting my arms around FreeBSD and the updating processes
Rishi Chopra [EMAIL PROTECTED] writes:
A question about the 'me' keyword and ipfw: The man page for ipfw
states the following:
me matches any IP address configured on an interface in the
system. The address list is evaluated at the time the
[EMAIL PROTECTED] writes:
My preference goes to Smart Boot Manager http://btmgr.sourceforge.net/
[snip]
No need for any partition, just install the full app into MBR. If something goes
wrong, boot from floppy and re-install.
It doesn't fit into the MBR; the MBR is only 512 bytes. The
Bjorn Eikeland wrote:
Hi
I had four 160G IDE drives in raid5 on a single controller and it
worked just fine, never benchmarked it since it was faster than the
network anyway. But when adding a second controller card and two more
drives the new array has a terrible write performance.
I've
marlon corleone wrote:
after installing 5.2-RELEASE, startx crashed with this error, someone
that i should change the securelevel to '-1' well i did changed it but
same error message i also tried sysctl kern.secureleve=-1 as root
but the message is operation not permitted
XFree86 Version
i added rc.conf as below
rarpd_enable=YES # Run rarpd (or NO).
rarpd_flags= # Flags to rarpd.
and rarpd works
ps aux |grep rarpd
root 7740 0.0 0.4 1160 560 ?? Is5:13PM 0:00.00 rarpd -a
but rarp is contary arp isn't it ?
that is i want to find out ip
So I'm upgrading my 5.1R desktop to 5.2R. Used cvsup, followed the
instructions in UPGRADING, did a custom kernel, etc etc. That part went
fine, no probs.
I noticed some of my daemons (from ports) seemed a bit annoyed though upon
booting up 5.2. I tried using portupgrade -Rf on them
Hi FreeBSD Folks,
I'm installing FreeBSD and, although the installation can boot from the
CD, when I select a CD/DVD as the installation source, it says it can't
find the CD. Obviously, the BIOS can read the CD because it booted from
it, but apparently FreeBSD seems to be unable to see it.
Does the freebsd website explain what has changed with every RELEASE
patch level?
I.E. 4.9-RELEASE-p1
What is p1 exactly, what has changed since?
TIA
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
I'm a newbie to your OS, Does Free BSD have the KDE and Gnome GUI already
installed? Do you have plans in making the installation more user friendly
in the future?
Donald M. Turnbull MCSE, MCDBA
_
Let the new MSN Premium
On Thu, 15 Jan 2004, Donald Turnbull wrote:
I'm a newbie to your OS, Does Free BSD have the KDE and Gnome GUI already
installed? Do you have plans in making the installation more user friendly
in the future?
cd /usr/ports
make search name=kde
cd /usr/ports/x11/kdebase3
make install
wait..
I'm installing FreeBSD and, although the installation can boot from the
CD, when I select a CD/DVD as the installation source, it says it can't
find the CD. Obviously, the BIOS can read the CD because it booted from
it, but apparently FreeBSD seems to be unable to see it.
Any thoughts on how
On Thu, 15 Jan 2004, Scott I. Remick wrote:
So I'm upgrading my 5.1R desktop to 5.2R. Used cvsup, followed the
instructions in UPGRADING, did a custom kernel, etc etc. That part went
fine, no probs.
I noticed some of my daemons (from ports) seemed a bit annoyed though upon
booting up 5.2. I
Hi :)
Allright, so, I've been trying to build a routing setup for some weeks now,
and after looking everywhere and asking for help, I still cannot find the
answer.
Here is what I want to do: source routing to 2 internet connections.
Basically, I want net1 to go on the Internet using gateway
On Thu, 15 Jan 2004 12:20:21 +
marlon corleone [EMAIL PROTECTED] wrote:
after installing 5.2-RELEASE, startx crashed with this error, someone
that i should change the securelevel to '-1' well i did changed it but
same error message i also tried sysctl kern.secureleve=-1 as root
but the
On Thursday 15 January 2004 16:41, Dirk Meyer wrote:
Thats easy on your router:
#!/bin/sh
gateway1=10.10.10.1
gateway2=10.10.10.2
dmz=10.10.20.0/24
lan=10.10.30.0/24
ipfw add fwd ${gateway2} ip from ${dmz} to any
ipfw add fwd ${gateway1} ip from ${lan} to any
Thanks... but the thing is
Hello,
I am trying to install FreeBSD 4.9 on a machine that already has XP
installed. It has 3 SCSI drives. I would like to keep XP on the first
drive, and install FreeBSD on the third drive and make it dual-boot.
What's the easiest way?
When I installed, I made a slice on the 3rd disk (using
On Thu, 15 Jan 2004 09:46:29 -0200
jason [EMAIL PROTECTED] wrote:
marlon corleone wrote:
after installing 5.2-RELEASE, startx crashed with this error, someone
that i should change the securelevel to '-1' well i did changed it but
same error message i also tried sysctl
On Thu, 15 Jan 2004 11:15:02 -0500
Duane Winner [EMAIL PROTECTED] wrote:
Hello,
I am trying to install FreeBSD 4.9 on a machine that already has XP
installed. It has 3 SCSI drives. I would like to keep XP on the first
drive, and install FreeBSD on the third drive and make it dual-boot.
On Thu, 15 Jan 2004 15:47:08 +, Donald Turnbull wrote:
I'm a newbie to your OS, Does Free BSD have the KDE and Gnome GUI already
installed?
Already installed? No. A large number people want to run FreeBSD on their
servers, and having a GUI on a server isn't usually a good or desired
On Thu, 15 Jan 2004 16:02:44 + (GMT), Jan Grant wrote:
On Thu, 15 Jan 2004, Scott I. Remick wrote:
So I'm upgrading my 5.1R desktop to 5.2R. Used cvsup, followed the
instructions in UPGRADING, did a custom kernel, etc etc. That part went
fine, no probs.
I noticed some of my daemons
I have tried various versions of Samba 3.x.x on my FreeBSD 4.9 server
without success. (Including the current port)
The install goes smoothly however running testparm I encounter the
following errors...
LILO is the best in my opinion.
Quintin
[EMAIL PROTECTED] wrote:
Good morning, FreeBSD enthusiasts.
I am planning a multiple operating system installation on a Compaq Proliant
5000. The purpose of the installation is hobbyist and instructional. The
computer does not provide network
(Sorry to insist, I'm still blocked with this unable to write data to disk dislaber
editor problem. I really need to solve it urgently because I need new hd space.
Is it possible that this problem occurs because the swap partition is also idad1s1?
Perhaps you have some ideas I can try?
I'm a newbie to your OS, Does Free BSD have the KDE and Gnome
GUI already
installed? Do you have plans in making the installation more
user friendly
in the future?
Like any newbie I heartily recommend reading through the handbook under
the documentation section of www.freebsd.org . I
On Thursday 15 January 2004 09:47 am, Donald Turnbull wrote:
I'm a newbie to your OS, Does Free BSD have the KDE and Gnome GUI already
installed? Do you have plans in making the installation more user friendly
in the future?
Donald M. Turnbull MCSE, MCDBA
KDE and Gnome are on the
Hello,
I'm using FreeBSD 5.2-RELEASE and have installed the latest nvidia
drivers available. Everything works ok _except_ once I load X I cannot
switch back to the virtual console. I get a mode out of range error.
I had this problem with FreeBSD 4.8 as well.
This used to happen to me in
Hi,
Start in windows xp and use bootpart from:
http://www.winimage.com/bootpart.htm
List your partition of your disks with this tool and have look where freebsd is
installed.
(It is a nice freeware tool and you don't risk any damage to the partition table!) You
can than create with Bootpart a
On Thu, Jan 15, 2004 at 10:03:31AM -0500, Scott I. Remick wrote:
So... my ultimate question is: how do you pros handle situations like this?
Is there a trick I'm missing?
Work out what went wrong, fix it and then just run:
# portupgrade -af '2004-01-15'
which does a forced update of all
On Thu, 15 Jan 2004 17:12:27 +, Matthew Seaman wrote:
Work out what went wrong, fix it and then just run:
# portupgrade -af '2004-01-15'
which does a forced update of all packages installed before the given
date. (Note: -R and -r are unnecessary with -a). Rinse,
repeat. Until
Hello,
I am trying to install FreeBSD 4.9 on a machine that already has XP
installed. It has 3 SCSI drives. I would like to keep XP on the first
drive, and install FreeBSD on the third drive and make it dual-boot.
What's the easiest way?
When I installed, I made a slice on the 3rd disk
On Thu, 2004-01-15 at 08:40, Jeff Royle wrote:
I have tried various versions of Samba 3.x.x on my FreeBSD 4.9 server
without success. (Including the current port)
This doesn't answer your question, but here is my experience with Samba
and FreeBSD. There was long time that the port samba-dev
On Thu, Jan 15, 2004 at 12:25:17PM -0500, Scott I. Remick wrote:
One question: it's not clear from man pkg_glob whether I can combine the
date format '2004-01-15' with a package name, so that I only update the
dependencies of a SPECIFIC package that are older than that date (using -f
instead
Hi,
Problem:
There is a bug in FreeBSD 5.2 that is keeping me from migrating to it.
Question:
Is there a resource like bugzilla so I can track the bug? (My only idea
so far is to subscribe to the cvs update list and filter for key words.)
Thanks,
Micheas
--
Micheas Herman
Joel Gudknecht wrote:
Does the freebsd website explain what has changed with every RELEASE
patch level?
I.E. 4.9-RELEASE-p1
What is p1 exactly, what has changed since?
TIA
/usr/src/UPDATING documents what has changed.
http://www.freebsd.org/cgi/cvsweb.cgi/src/UPDATING?only_with_tag=RELENG_4_9
On Thu, Jan 15, 2004 at 09:40:53AM -0800, Micheas Herman wrote:
Is there a resource like bugzilla so I can track the bug? (My only idea
so far is to subscribe to the cvs update list and filter for key words.)
Yes: FreeBSD uses Gnats for it's PR database. This is the page you need:
Hi,
I'm trying pppoed in freebsd-4.9. It is working fine. I can connect from
Win98, Win2k and winxp using Raspppoe. However I'm getting lots of message in
my pppoed.log. It seems as if pppoed is responding to some request. But I'm
not able to find out what it is. I get these message in
I was trying to install FDSB 4.9.
I've just noticed that I get a MODE_SENSE_BIG timeout on acd0. Sounds
like there is something it doesn't like about the CDROM. Once again,
though, it seems to be booting from it (which I guess is a function of
the BIOS).
I specified a non-plug and play OS in
On Thursday 15 January 2004 17:06, Adam Olsen wrote:
Hello,
I'm using FreeBSD 5.2-RELEASE and have installed the latest nvidia
drivers available. Everything works ok _except_ once I load X I cannot
switch back to the virtual console. I get a mode out of range error.
I had this problem
On Thu, 15 Jan 2004 17:38:41 +, Matthew Seaman wrote:
portupgrade -rfx '=2004-01-15' foo
will force re-install 'foo' and everything that depends on package
'foo', except those packages installed on or after the given date.
Well, actually I want -R and not -r, but anyways.. almost,
Daniela,
I see it when I switch to a virtual console only. When I switch back to
X, I'm ok again. Also, if I exit X, I get it the error, but I can
blindly startx again.
At one point in FreeBSD 4.8 I could switch to the virtual console, but
everything was wavy - text was moving around (it
Hi,
Currently I try to collect all BSD website and will put it online for future
references. So far, these are in my list. Any other site that I missed?
FreeBSD FreeBSD:The Power To Serve
FreeBSD Official Site
http://www.freebsd.org/
FreeBSD Documentation
On Thursday 15 January 2004 15:25, David Armstrong wrote:
Hi FreeBSD Folks,
I'm installing FreeBSD and, although the installation can boot from the
CD, when I select a CD/DVD as the installation source, it says it can't
find the CD. Obviously, the BIOS can read the CD because it booted from
It is an ATAPI (IDE) device. The first device on secondary cable.
Thanks!
Simon Gray wrote:
I'm installing FreeBSD and, although the installation can boot from the
CD, when I select a CD/DVD as the installation source, it says it can't
find the CD. Obviously, the BIOS can read the CD because it
http://mirbsd.bsdadvocacy.org/
http://www.ekkobsd.org/
http://www.dragonflybsd.org/Main/
--- zam4ever [EMAIL PROTECTED] wrote:
Hi,
Currently I try to collect all BSD website and will
put it online for future
references. So far, these are in my list. Any other
site that I missed?
FreeBSD
On Thursday 15 January 2004 19:29, Adam Olsen wrote:
Daniela,
I see it when I switch to a virtual console only. When I switch back to
X, I'm ok again. Also, if I exit X, I get it the error, but I can
blindly startx again.
I don't quite understand what you mean. I thought you can't switch
At 2004-01-15T19:33:36Z, zam4ever [EMAIL PROTECTED] writes:
Currently I try to collect all BSD website and will put it online for
future references. So far, these are in my list. Any other site that I
missed?
http://subwiki.honeypot.net/cgi-bin/view/Freebsd/WebHome
--
Kirk Strauser
94
Daniela,
Ok - Everything works perfectly in X. When I switch to the VT, I get a
mode out of range error. I can switch back to X just fine. Just the VT
has this problem.
I never get the wavy text while in X. If by chance I am able to switch
to the VT for some reason without getting the
I've only got the one drive in their. I think there is a setup issue
with the drive. The message MODE_SENSE_BIG timeout occurs on acd0 when
the installation program starts. Does this ring any bells with anyone?
Thanks for the help so far.
Dave
Daniela wrote:
On Thursday 15 January 2004
Hello everyone,
Today, I found out that my server has unusual high incoming bandwidth
usage (4Mbit/s) in some hours. Usually, my server will not have more than
200Kbit/s.
How can I check what the cause is?
Thanks
Meimi
___
[EMAIL PROTECTED] mailing
On Thursday 15 January 2004 19:33, zam4ever wrote:
Hi,
Currently I try to collect all BSD website and will put it online for
future references. So far, these are in my list. Any other site that I
missed?
user.berklix.org/~dgw
That's my LiveCD project. Has started only a short time ago.
On Thu, Jan 15, 2004 at 01:00:25PM -0700, Adam Olsen wrote:
Daniela,
Ok - Everything works perfectly in X. When I switch to the VT, I get a
mode out of range error. I can switch back to X just fine. Just the VT
has this problem.
How are you 'switching to the VT' exactly?
--
Jez
CTRL+ALT+F1 etc...
Jez Hancock wrote:
On Thu, Jan 15, 2004 at 01:00:25PM -0700, Adam Olsen wrote:
Daniela,
Ok - Everything works perfectly in X. When I switch to the VT, I get a
mode out of range error. I can switch back to X just fine. Just the VT
has this problem.
How are you 'switching
Tillman Hodgson [EMAIL PROTECTED] writes:
* I built 4 kernels: 3 customized and GENERIC (see above for why)
Note that kernels are forced into serial compilation anyway,
so the -j flag has no effect on them. This test probably
spent a lot more time building kernels than the world, so it
doesn't
On Thursday 15 January 2004 20:00, Adam Olsen wrote:
Daniela,
Ok - Everything works perfectly in X. When I switch to the VT, I get a
mode out of range error. I can switch back to X just fine. Just the VT
has this problem.
OK, when you press, say, ctrl+alt+F1 to switch to the VT, are you
On Thu, Jan 15, 2004 at 03:59:22PM -0500, Lowell Gilbert wrote:
Tillman Hodgson [EMAIL PROTECTED] writes:
* I built 4 kernels: 3 customized and GENERIC (see above for why)
Note that kernels are forced into serial compilation anyway,
so the -j flag has no effect on them. This test probably
I have some followup details that I have discovered that make
make a difference in nailing this down.
I tried to duplicate the hung process on disk I/O problem on
an older (hence slower machine) and was unable to duplicate it. This got
me to thinking about the problems I have
Daniela,
When I press ctrl+alt+F1, I am on the virtual console, but I cannot see
it because I'm getting the mode out of range error. X does not
terminate - and if I press ctrl+alt+F9, I can get back to X just fine -
no more out of range error on the monitor.
I can be on the virtual console
After portupgrading my system, I'm having difficulties opening pdf files using
acroread5 and xpdf as a normal user. I've tried using the applications as
stand-alone apps, and I've tried opening pdf files in Mozilla and Opera --all
with the same results:
If I'm trying to open the pdf file as a
Dear All;
Has any body running FreeBsd 4.XX on Abit KV7-KT600 motherboard??
The above motherboard has the following specification:
Abit KV7 KT600A USB2+ LAN + 6CH.
It also uses the VIA KT600 / VT8237 chipset.
So any of you guy has any expricence with the above motherboard using UDMA133 (Since
On Thu, Jan 15, 2004 at 03:39:08PM -0600, Andrew L. Gould wrote:
If I'm trying to open the pdf file as a normal user, I get the following
message:
There was an error opening this document. A temporary file could not be
opened.
If I run acroread or xpdf as root, I can open the files
My make buildworld/kernl keeps failing out with this error:
error: 'PFIL_OUT' undeclared (first use in this function)
Is this now required to compile IPFilter on FreeBSD 5.2?
Isn't there some way to generate a LINT file? I remember doing it once but
can't find it anymore.
On Thursday 15 January 2004 04:12 pm, Matthew Seaman wrote:
On Thu, Jan 15, 2004 at 03:39:08PM -0600, Andrew L. Gould wrote:
If I'm trying to open the pdf file as a normal user, I get the following
message:
There was an error opening this document. A temporary file could not be
opened.
In the immortal words of Jeff Royle [EMAIL PROTECTED]...
I have tried various versions of Samba 3.x.x on my FreeBSD 4.9 server
without success. (Including the current port)
The install goes smoothly however running testparm I encounter the
following errors...
snip
I'm having the same
On Thu, Jan 15, 2004 at 04:15:35PM -0600, Andrew L. Gould wrote:
On Thursday 15 January 2004 04:12 pm, Matthew Seaman wrote:
On Thu, Jan 15, 2004 at 03:39:08PM -0600, Andrew L. Gould wrote:
If I'm trying to open the pdf file as a normal user, I get the following
message:
There was
On Thursday 15 January 2004 04:23 pm, Jonathan Chen wrote:
On Thu, Jan 15, 2004 at 04:15:35PM -0600, Andrew L. Gould wrote:
On Thursday 15 January 2004 04:12 pm, Matthew Seaman wrote:
On Thu, Jan 15, 2004 at 03:39:08PM -0600, Andrew L. Gould wrote:
If I'm trying to open the pdf file as a
On Thu, Jan 15, 2004 at 04:25:35PM -0600, Andrew L. Gould wrote:
On Thursday 15 January 2004 04:23 pm, Jonathan Chen wrote:
On Thu, Jan 15, 2004 at 04:15:35PM -0600, Andrew L. Gould wrote:
On Thursday 15 January 2004 04:12 pm, Matthew Seaman wrote:
On Thu, Jan 15, 2004 at 03:39:08PM
Hi
I found old chart about some comparison between some OS FreeBSD , Linux and
like this . Does any body know any new report or chart about performans
between Oss which included FreeBSD of course .
Thanks
Vahric
___
[EMAIL PROTECTED] mailing
On Thu, Jan 15, 2004 at 05:10:01PM +0100, Antoine Jacoutot wrote:
On Thursday 15 January 2004 16:41, Dirk Meyer wrote:
Thats easy on your router:
#!/bin/sh
gateway1=10.10.10.1
gateway2=10.10.10.2
dmz=10.10.20.0/24
lan=10.10.30.0/24
ipfw add fwd ${gateway2} ip from ${dmz} to any
On Fri, Jan 16, 2004 at 12:29:37AM +0200, Vahric MUHTARYAN wrote:
Hi
I found old chart about some comparison between some OS FreeBSD , Linux and
like this . Does any body know any new report or chart about performans
between Oss which included FreeBSD of course .
Do a google search for
On Thursday 15 January 2004 04:28 pm, Jonathan Chen wrote:
On Thu, Jan 15, 2004 at 04:25:35PM -0600, Andrew L. Gould wrote:
On Thursday 15 January 2004 04:23 pm, Jonathan Chen wrote:
On Thu, Jan 15, 2004 at 04:15:35PM -0600, Andrew L. Gould wrote:
On Thursday 15 January 2004 04:12 pm,
On Thursday 15 January 2004 23:18, Tim Aslat wrote:
I realise this is a maintainer issu, however I would like some
indication of wether it's a localised problem or if it's common enough
that something needs to be done about it.
This is how I install samba-devel on my 5-2 boxes without anyu
Hello,
I have IBM 325 PCServer with one 200 Pentium Pro CPU and two SCSI HDD
drives and a SCSI CDROM. I'm installing FreeBSD 4.9 via floppy and it
hangs when it says:
Waiting 15 seconds for drives to settle
I notice that it is accessing the cdrom, during the wait, but nothing
else happens.
I know that , I'm looking for another one this
Thanks
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tillman Hodgson
Sent: Friday, January 16, 2004 12:34 AM
To: [EMAIL PROTECTED]
Subject: Re: Any comparison chart for FreeBSD and other OS about
Greetings;
Was running FreeBSD 5.1 Release on a Dell Inspiron 8500 with
a CD-RW/DVD Combo drive and backed up data onto several
new CD-RWs simply as follows:
burncd -s max data archive.tar.gz
Then after installing FreeBSD 5.2 Release, tried restoring
as follows:
tar -xvzf /dev/acd0
And
On Thursday, 15 January 2004 at 10:44:20 +0100, Bjorn Eikeland wrote:
Hi
I had four 160G IDE drives in raid5 on a single controller and it worked
just fine, never benchmarked it since it was faster than the network
anyway. But when adding a second controller card and two more drives the
new
Hi FreeBSD Users , Admins ...
yesterday in Turkey, HP prepared a Roadshow about his strategy about
linux with Oracle , Novell , bea. I talked with ORACLE Turkey director, He
said that in USA, those firms ( Oracle or others ) does not make an
agreement with non-firm.
I wonder
On Thu, 15 Jan 2004 17:55:32 -0500
Richard Cotrina [EMAIL PROTECTED] wrote:
Hello :
What is the correct tag for cvsuping 5.2-RELEASE ? I used RELENG_5 but it
does not work. Should I used tag . ?
Acording the info in the web, tag . refers to CURRENT, not RELEASE or
STABLE.
. will bing you
In the immortal words of Antoine Jacoutot [EMAIL PROTECTED]...
This is how I install samba-devel on my 5-2 boxes without anyu
problem:
env CONFIGURE_ARGS=--with-ldap env
CONFIGURE_ENV=CPPFLAGS=-I/usr/local/include LDFLAGS=-L/usr/local/lib
make -DWITHOUT_CUPS -DWITH_QUOTAS -DWITH_MSDFS
1 - 100 of 138 matches
Mail list logo
