On Wed, Feb 25, 2004 at 07:20:34PM -0800, Gary Kline wrote:
Folks,
On another server I'm trying to build openoffice-1.1.
Finally got the Java stuff to build; now I ran into
this:
=== Configuring for openoffice-1.1.0_3
FATAL ERROR: Autoconf version 2.50 or higher
how could I fix this problem with usb:
usb_set_altinterface: Invalid argument
I am using FreeBSD .local 5.2.1-RC2 FreeBSD 5.2.1-RC2, Thanks all
--
HK Celtic Orchestra leader and coordanator: Thomas Graham Lau
Phone number: 852-93239670(24hours a day, 7days a week non-stop phone)
Web
Hi.
I setup a disk stripping with two disks and vinum. I was impressed about
the quick and easy setup.
The configuration is, that i installed FreeBSD 5.2.1-RC2 on /, a little
bit of swap, and the gave the rest for vinum.
So the two disks have both a bootable / and /usr and /var is on vinum.
All
Hello,
I want to setup a firewall (on my LAN's gateway) so that the only
traffic that pass through is the one initiated from my local network (we
have public IP's).
My firewall looks like this
ipfw add check-state
ipfw add deny tcp from any to any established
ipfw add allow tcp from $my_lan to
Attention: [EMAIL PROTECTED]
A Virus was found in an Email message you sent.
This Email scanner intercepted it and stopped the entire message
reaching it's destination.
The Virus was reported to be:
W32/[EMAIL PROTECTED]
Please update your virus scanner or contact your I.T support
just a thought...
why don't you simply setup a refuse file in /usr/sup (copy it from
/usr/share/example/cvsup/) instead of downloading foreign language ports...
S H A N
Seeing yourself as you want to be is the key to personal growth.
- Unknown
On Thu Jan 29, 2004 at 05:09:11AM SGT,
hello, i'm eechia.
i've come across your mountroot problem on the web.
i'm facing the similiar problem too.
can you give me some guideline regarding it?
thanks you
-eechia-
Date: 12 jan 2004
According to me, you have choice:
1) start the kernel with -a option (e.g. boot -a ): with
You can also set the shell to passwd.
On Thu, 26 Feb 2004, Peter Risdon wrote:
Jeffrey Allan D. Java wrote:
Hi,
Is it possible to add an email account in a mail server without
a shell account?
Yes, by using some additional software to manage the virtual user.
Hi Again ,
Okey , I can explaine like this ,
Somebody will send a mail address to [EMAIL PROTECTED] and Mail tracking system will
get this message and carry out to the web . Person can track what happinig
and can wrote a message from web .
Vahric MUHTARYAN
-Original Message-
From:
On Thu, Feb 26, 2004 at 09:03:07AM +0100, Alex de Kruijff wrote:
On Wed, Feb 25, 2004 at 07:20:34PM -0800, Gary Kline wrote:
Folks,
On another server I'm trying to build openoffice-1.1.
Finally got the Java stuff to build; now I ran into
this:
=== Configuring for
doug wrote:
You can also set the shell to passwd.
That's a good point, based on a closer reading of the OP than my own.
The difference being that it requires the addition of a user for each
mail account whereas something like vpopmail does not. I've googled but
can't see anything about this
Witam
I got problem with installing 5.2.1 RC2 after i've changed my
MBO. Earlier I've used MSI kt4v on VIA chipset and there was no
problem. Now I got ABIT NF7-SL on nForce2 chipset and I'm
wondering what's goin' on? When I try to install fbsd,
installation stops every
Jim Pazarena wrote:
I added:
device rp
device rp0 at pci? port 0x8400
to my kernel, and the next reboot proclaims:
/kernel: rp0: rp port 0x8400-0x847f irq 12 at device 7.0 on pci2
/kernel: RocketPort0 = 16 ports
/kernel: rp0: driver is using old-style compatibility shims
-
can anyone
On Wed, Feb 25, 2004 at 12:27:56PM +0800, Benjamin Meade wrote:
Caio Souza Mendes wrote:
Then, it wants to say that version 5.3 will not be
stable and yes release?
No, the RELENG tag indicates a stable build. The CURRENT tag is used for
non-stable (development) build.
The CURRENT or
Hi,
Since you use a smart host, all email is directly send to that host i think
{ not very familiar with sendmail }
So my guess is that you need local aliases on t he smtp.washington.edu
machine..
HTH,
--
Kind regards,
Remko Lodder
Elvandar.org/DSINet.org
www.mostly-harmless.nl Dutch
Has anyone any experience from running any virus scanners on a FreeBSD
Samba server? The server is serving mostly MS-workstations, so the
scanner should be proficient in finding the most common viruses in the
M$ world.
Any information is of value, and please CC me, since the information
flow on
Hello--
I'm trying to use a hotel wireless network effectively. I can connect
perfectly, and surf/do email, and so forth. However, I have to
re-authenticate to the server every 2 minutes (the length of
DHCP lease handed out).
According to Orange WiFi, this is because the DHCP server sends
some
Hi, I've got the same chipset in my mobo. There is
some kind of problem with ACPI, so its better to boot
without it (either disable it in bios/either choose
the right boot option).
Later on you will have some more problems with onboard
NIC and (if you have one) nvidia gfx.
Write to me if you
On Feb 26, 2004, at 10:47 AM, Tiarnan O'Corrain wrote:
According to Orange WiFi, this is because the DHCP server sends
some kind of a keep-alive ticket to the client every 2 minutes, and
if the client does not respond, the lease is revoked.
This functionality seems to rely on some non-standard
Gunnar Flygt wrote:
Has anyone any experience from running any virus scanners on a FreeBSD
Samba server? The server is serving mostly MS-workstations, so the
scanner should be proficient in finding the most common viruses in the
M$ world.
I use Sophos, because it has Windows and
Dirk-Willem van Gulik [EMAIL PROTECTED] writes:
On Feb 26, 2004, at 10:47 AM, Tiarnan O'Corrain wrote:
According to Orange WiFi, this is because the DHCP server sends
some kind of a keep-alive ticket to the client every 2 minutes, and
if the client does not respond, the lease is revoked.
I'm having problems compiling the current src's. The
error I'm having looks like this:
...
(cd /usr/src/rescue/rescue/../../sbin/atm/fore_dnld
make -DRESCUE CRUNCH_CFLAGS=-DRESCUE depend make
-DRESCUE CRUNCH_CFLAGS=-DRESCUE fore_dnld.o
pca200e.o)
rm -f .depend
mkdep -f .depend -a
On Wed, 25 Feb 2004 19:20:34 -0800
Gary Kline [EMAIL PROTECTED] wrote:
On another server I'm trying to build openoffice-1.1.
Finally got the Java stuff to build; now I ran into
this:
=== Configuring for openoffice-1.1.0_3
FATAL ERROR: Autoconf version 2.50 or higher is
Hi there!
I'm trying to recompile kernel.
Config is in attach.
Made same tricks with make.conf
It's also in attach.
Then:
make -j4 kernel KERNCONF=DERALSEM
It gives no errors. Everything seems fine.
After booting, bright white text passes, and thirst gray lines are:
pid
On Wed, 25 Feb 2004, Mathias Haas wrote:
Oh my! What stupidity! Of course. I'm afraid sometimes my DOS-roots are
revealed... Thanks!
In general, you ought to be aware that cron sets up only a minimal
environment. If you want your scripts to run predictably then you
probably ought to ensure
On Thu, Feb 26, 2004 at 01:59:34PM +0300, DerAlSem wrote:
Hi there!
I'm trying to recompile kernel.
Config is in attach.
Made same tricks with make.conf
It's also in attach.
Then:
make -j4 kernel KERNCONF=DERALSEM
It gives no errors. Everything seems fine.
Hi there!
I'm trying to recompile kernel.
Config is in attach.
Made same tricks with make.conf
It's also in attach.
Then:
make -j4 kernel KERNCONF=DERALSEM
It gives no errors. Everything seems fine.
After booting, bright white text passes, and thirst gray lines are:
pid
when will a stable version of the technology release of freebsd be
coming out?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi
When i boot my firewall i get a permission denied from routed when it tries to sendto
the second nic.
What could be causing this?
Med vänliga hälsningar
Stefan Midjich, Swebase AB
Tel: 042-20 15 00
Fax: 042-20 15 03
E-post: [EMAIL PROTECTED]
Webb: http://swebase.com
Hi all,
I have a firewall with three network cards. There are two networks on
the inside of the firewall. One is private IP's and those are NATted by
the firewall. The other is public IP's being protected by the firewall.
The two internal networks used to be on separate switches. All of the
Bernard El-Hagin wrote:
Uwe Doering wrote:
Bernard El-Hagin wrote:
Kris Kennaway [EMAIL PROTECTED] wrote:
[...]
I think there's something in one of the included makefiles that relies
on a change to make(1) that happened after 5.1-RELEASE. Note that
only the most recent release is supported by the
Shaun T. Erickson wrote:
I understand that 'portupgrade -arR' will upgrade everything. Some are
packages and some are ports. Will portupgrade upgrade packages with
packages, and ports with ports, or do packages get replaced with
ports, so that all are ports after it's run?
-ste
I am running FreeBSD 5.1 and I am suddenly having problems loading certain web
pages. The system is behind another FreeBSD machine acting as a router and
DHCP server, so it pulls it's IP and such from the router machine. I did not
change any settings on either system, and suddenly some web
On Thu, Feb 26, 2004 at 10:54:21PM -0500, Michael Sharp wrote:
pkgdb is still looking for /usr/local/bin/ruby which after the upgrade
dosent exist. Its now /usr/local/bin/ruby16
ln -s /usr/local/bin/ruby16 /usr/local/bin/ruby
fixes pkgdb and portsdb
Did you report this to the portupgrade
I'm trying to get gphoto2 to work with my canon sd100 digital elph. I am
sure the device is connected correctly and is on. I keep getting a PTP I/O
error and I don't know where to start. Gphoto2 claims that this is a
compatible camera.
Here is the debug log. Thanks for any help.
Charles Swiger wrote:
On Feb 27, 2004, at 12:27 AM, Benjamin P. Keating wrote:
I have a hard drive that had lots of important data on it. It was
reformatted and I have no backups (lesson learned). It was a ccd
mirror of two 100gig drives. Once the reformat of this ccd completed
the machine
I'm wanting to make a web based configuration tool for my wireless routers
(setting up freebsd boxes to make a outdoor wlan) - ofcourse I can use ssh
and webmin, but the configuration should be made even easier for less
technical users.
I've read the how to use Webmin with apache, didnt quite
On Thu, Feb 26, 2004 at 02:49:55PM -0500, Shaun T. Erickson wrote:
[...]
Can someone who isn't trying to sell me something, corroborate anything
he's said? It would be nice to hear from someone else, too. :)
Here's an example of using ipfw+natd with stateful rules. The basic
idea is to use
Kevin D. Kinsey, DaleCo, S.P. wrote:
Shaun T. Erickson wrote:
I understand that 'portupgrade -arR' will upgrade everything. Some are
packages and some are ports. Will portupgrade upgrade packages with
packages, and ports with ports, or do packages get replaced with
ports, so that all are
On Fri, Feb 27, 2004 at 12:55:55AM -0500, Shaun T. Erickson wrote:
I understand that 'portupgrade -arR' will upgrade everything. Some are
packages and some are ports. Will portupgrade upgrade packages with
packages, and ports with ports, or do packages get replaced with ports,
so that all
On Thu, Feb 26, 2004 at 09:58:30PM -0800, Michael Dunham wrote:
I tried to build and install a new kernel tonight and got -
freebie# cd /usr/src
freebie# make kernel KERNCONF=FREEBIE
Makefile.inc1, line 712: warning: String comparison operator should be
either == or !=
Makefile.inc1, line
Uwe Doering wrote:
Bernard El-Hagin wrote:
Uwe Doering wrote:
Bernard El-Hagin wrote:
Kris Kennaway [EMAIL PROTECTED] wrote:
[...]
I think there's something in one of the included makefiles that relies
on a change to make(1) that happened after 5.1-RELEASE. Note that
only the most recent
On Thu, 26 Feb 2004 11:43:43 +0900
Rob [EMAIL PROTECTED] wrote:
Noah wrote:
FreebSD 4-9
can somebody please verify if I have my cvsup config file setup
correctly? these are the only uncommented lines.
--- snip ---
*default host=cvsup13.FreeBSD.org
*default base=/usr
I need some help and it might not be related to FreeBSD, but I am hoping
someone can offer me advise.
I did a full install of 5.2 on IDE and still have the generic kernel.
Fbsd sees my scsi card just fine :)
(Adaptec 29160LP)+ IBM eServer X305
..Problem is, that when I fire up the machine with
Hi,
I've been thinking about this and I'm wondering if it is possible to do
something like the following:
I have an existing RAID5 volume, comprised of just 3 120GB disks.
However, I've just bought three more 250GB disks that I also want to
RAID5.
I would still like a single volume,
On Thu, 26 Feb 2004, [iso-8859-2] Roubíèek Zdenìk (T-Systems PragoNet) wrote:
Any idea what I am missing?
You don't say what you are expecting these awk samples to do...
cat test
There is a command called test, so you should not use that name for test
files.
1;1
2;2
awk -F
I am running FreeBSD 4.9-STABLE-20031202-JPSNAP
which I had hoped would have SATA driver, but it
still cannot see my SATA drive. Will the SATA driver
be ported to 4.9?
Thank you,
Arya
___
[EMAIL PROTECTED] mailing list
I'v got a 4.2 STABLE machine I'm trying to use cvsup to bring up to data.
When I run the cvsup that's on it to connect to my cvsup seerver, I get a
message about upgrading cvsup, and a reference to a web page at:
http://www.cvsup.org/s1g/
But that link seems to be dead.
What can I do to get
Uwe Doering writes:
If you haven't already done so, install the port 'cvsup', preferably the
precompiled package in order to avoid having to install Modula (which
'cvsup' is written in).
Then you need an appropriate supfile, '/etc/cvsup-src-5.2' in this
example, which should look
J.D. Bronson writes:
What can I do so that I can boot off the IDE with the SCSI drive
attached!? ..from there, I can slice/dice and dump/restore and
finish my conversion over to the SCSI drive...
In the Adaptec BIOD (Ctl-A while booting) there's a setting for
drive bootable -
dgw at liwest.at wrote:
user.berklix.org/~dgw
That's my LiveCD project. Has started only a short time ago.
Daniela
I just updated the current list of available BSD website. Since it is a very
long list, I will not paste the output here, but you can access it via:
At 09:07 AM 02/26/2004, Robert Huff wrote:
J.D. Bronson writes:
What can I do so that I can boot off the IDE with the SCSI drive
attached!? ..from there, I can slice/dice and dump/restore and
finish my conversion over to the SCSI drive...
In the Adaptec BIOD (Ctl-A while booting)
On Thu, 26 Feb 2004 06:55, Henning, Brian wrote:
Chris,
I am trying to use the same setup as you have to get ntpd working.
touch /var/db/ntpd.drift
In my rc.conf file I have to use the following
xntpd_enable=YES
xntpd_program=/usr/sbin/ntpd
xntpd_flags=-c /etc/ntp.conf
xntpd_flags=-p
Guy Harrison [EMAIL PROTECTED] writes:
Hi Folks,
Booting 5.2.1 from mini boot-only iso...
[scrolled away]
pci_cfgintr; 0:16 INTA BIOS irq 5
pci_cfgintr; 0:18 INTA BIOS irq 11
pcib1: PCI-PCI bridge at device 1.0 on pci 0
pci1: PCI bus on pcib1
Fatal trap 12: page fault while in
On 2/25/2004 at 3:11 PM Henning, Brian wrote:
|ntpq -c peer
|
| remote refid st t when poll reach delay offset
|jitter
|
|==
|+time.nist.gov .ACTS. 1 u 26 64 377 51.856 -41.364
FreeBSD-4.9
a segmenation fault experienced while building python-2.3.3 - anybody got some
clues on this?
--- build output
configure: creating ./config.status
config.status: creating Makefile.pre
config.status: creating Modules/Setup.config
config.status: creating pyconfig.h
creating
hi
I having an error on create a new slice.
well, I trying to install freebsd 5.1 on my
primary(master) hard drive, which already contain 2 os
which are Linux RH 9.0 and windows 2000 pro
I try to create a new slice on the unused partion and
the partion name should be
On Thursday 26 February 2004 06:44 am, stan wrote:
I'v got a 4.2 STABLE machine I'm trying to use cvsup to bring up to
data.
When I run the cvsup that's on it to connect to my cvsup seerver, I
get a message about upgrading cvsup, and a reference to a web page
at:
http://www.cvsup.org/s1g/
Vahric MUHTARYAN wrote:
Somebody will send a mail address to [EMAIL PROTECTED] and Mail tracking system will
get this message and carry out to the web . Person can track what happinig
and can wrote a message from web .
Regrettably, your explanation is still unclear.
Someone will send a mail
On Thu, Feb 26, 2004 at 11:13:20PM +0800, zam4ever wrote:
dgw at liwest.at wrote:
user.berklix.org/~dgw
That's my LiveCD project. Has started only a short time ago.
Daniela
I just updated the current list of available BSD website. Since it is a very
long list, I will not paste the output
Eric Toll wrote:
[ ... ]
My Question: How do I permanemtly alter the priority for everything a
particular user runs?
Check the priority option for /etc/login.conf, or else set up a variant shell
(nsh, nbash, nzsh) which you've changed to call nice(-15) or whatever. Note
that zsh is smart about
On Thu, Feb 26, 2004 at 11:13:20PM +0800, zam4ever wrote:
dgw at liwest.at wrote:
user.berklix.org/~dgw
That's my LiveCD project. Has started only a short time ago.
Daniela
I just updated the current list of available BSD website. Since it is a very
long list, I will not paste the output
Hi JJB,
Tks for your advice.
This is wrong.
is not comment or commandremove it.
You have all statements starting in position 1 this is
wrong, section header names start in position 1 and end with :
default: anddialisp:
make ppp.conf look like this
default: dialisp:
Hi Gary,
I saw your post in the groups about MagicFilter. I was hoping you could help me a
bit. I'm about to install MagicFilter so I can print bold and font sizes and such
from Perl scripts. I'm really unclear how to use this facility.
I have not yet installed the program, but once I
On Thu, Feb 26, 2004 at 07:22:41AM -0500, Ed Budd wrote:
On Thu, 26 Feb 2004 11:43:43 +0900
Rob [EMAIL PROTECTED] wrote:
Noah wrote:
*default release=cvs tag=.
ports-all
That's how I cvsup my ports tree. So should be alright for keeping
up-to-date with STABLE.
Uh, doesn't
5.2 has completely new file system and is know to destroy data and
hang causing you to reboot. Submit problem report about what
happened to you. If you do not want to be exposed to this problem
install 4.9
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
This might be more of an NFS question in general, but I'm not sure, so
I thought I'd try here.
I've got a FreeBSD NFS server behind two FreeBSD webservers (all 4.9)
who load all their pages from the NFS filesystem and I'm seeing less
traffic from the NFS server than I expected. The webservers
JJB wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Shaun T.
Erickson
Sent: Thursday, February 26, 2004 2:08 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Looking for ipfw info.
JJB wrote:
The problem with all those links is that what
- Original Message
From: Alex de Kruijff
To: zam4ever
Cc: . [EMAIL PROTECTED]
Subject: Re: BSD Website
Date: 27/02/04 00:51
Do you have these two?:
http://www.oreilly.com/catalog/opensources/book/kirkmck.html
http://www.levenez.com/unix/
Alex
Okay, I just updated these 2
I'm looking to take an old P120 with 128m of ram and turn it into a lan
DHCP server. The thing is, the guys who will be pulling DHCP addresses
are cream of the crop computer users who really know their way around.
So I plan to have all network services (minus DHCP of course) turned off
and I
Hello. Been trying to download 4.9 so I can put it on my other box but
when downloading the iso (from any mirror) I get a error saying there
isnt enough space to download 49ebcty7.exe to /tmp. Whats going on? I
have the space. Here is the output from df -H
Just what it says. The file is
[sry is this is a duplicate, I cannot find evidence that my first send
made it to the mailing list]
I have a hard drive that had lots of important data on it. It was
reformatted and I have no backups (lesson learned). It was a ccd mirror
of two 100gig drives. Once the reformat of this ccd
On Feb 26, 2004, at 2:30 PM, Michael Conlen wrote:
Does FreeBSD's NFS implementation allow for caching of documents on
the client side, either its self or through the VM system's inactive
pages?
Yes to both. NFS clients typically use something called biod or
nfsoid, which implements some
Hey Gang,
I need to find a good drop in ftpd-ssl server. Please don't tell me to
use sftp - I would love to but sometimes I don't get my druthers. I see
there's a BSDftpd-ssl, and there's a couple others in ports - are any of
them widely used? This is on a high traffic production server, so I
On Feb 26, 2004, at 4:33 PM, Charles Swiger wrote:
Well, you are going to be bottlenecked potentially by your network or
by the maximum I/O rate that your NFS server can sustain. Your data
suggests you ought to be able to handle about two orders of magnitude
more net traffic, if you're over a
On Feb 26, 2004, at 4:53 PM, Aloha Guy wrote:
Here is the HZ setting:
kern.clockrate: { hz = 100, tick = 1, profhz = 1024, stathz = 128 }
There's your issue right there: if you care about the millisecond level
granularity of network traffic going by this router, you ought to set
HZ to 1000 as
On Feb 27, 2004, at 12:27 AM, Benjamin P. Keating wrote:
I have a hard drive that had lots of important data on it. It was
reformatted and I have no backups (lesson learned). It was a ccd
mirror of two 100gig drives. Once the reformat of this ccd completed
the machine was shut down to prevent
I've got my primary drive divided in two partitions, one partition had
WindowsXP and the other has FreeBSD 5.1-Release on it. I had WindowsXP
installed and working until I put FreeBSD on the second partition and
had it take control of the MBR. I know that the other partition is still
Hi list, I've two servers, one running named and the Exim (MTA), the
second one running Apache and Squid, the trouble is that I want to send
mails through the second one to outside, but I can't, when I use:
second# mail [EMAIL PROTECTED] the mail fails and go to the root inbox,
and the
Hi all! How can I change the sensitivity of the mouse?
I am using the 4.9 release.
__
Do you Yahoo!?
Get better spam protection with Yahoo! Mail.
http://antispam.yahoo.com/tools
___
[EMAIL PROTECTED] mailing list
Charles Swiger [EMAIL PROTECTED] wrote: On Feb 26, 2004, at 4:53 PM, Aloha Guy wrote:
Here is the HZ setting:
kern.clockrate: { hz = 100, tick = 1, profhz = 1024, stathz = 128 }
There's your issue right there: if you care about the millisecond level
granularity of network traffic going by
I have a FreeBSD 5.0 and a FreeBSD 5.2 box both running recent versions of f-prot
antivirus when you run the virus def updater through cron it gets halfway through the
scripts and then dies. When you run it from the command line it runs correctly. so I
wrote my own script that uses ftp instead
My Plan is to make a gzipped tarball of the entire machine, excluding
directories that are not necessary. If however, there is a more sound
solution then tarballing a machine for a backup, Im all ears. I know
rsync is a possibility, but i'd like to have just a solid, non-active
archive copy of
On Feb 26, 2004, at 5:59 PM, Aloha Guy wrote:
Charles Swiger [EMAIL PROTECTED] wrote:
There's your issue right there: if you care about the millisecond
level
granularity of network traffic going by this router, you ought to set
HZ to 1000 as documented in man dummynet.
[ ... ]
Knew I forgot to
På Thu, 26 Feb 2004 16:27:21 -0600, skrev Kevin D. Kinsey, DaleCo, S.P.
[EMAIL PROTECTED]:
Bjorn Eikeland wrote:
I'm wanting to make a web based configuration tool for my wireless
routers
(setting up freebsd boxes to make a outdoor wlan) - ofcourse I can use
ssh
and webmin, but the
FreeBSD 4.9
rebuilt the latest memtest-2.93.1_1 and not seeing any output file built. who
can I report this to? It could quite possibly be a bug since I am running
memtest as root.
thanks in advance,
- noah
___
[EMAIL PROTECTED] mailing list
I cvsupped my ports tree about 3 hrs ago and there was a ruby update.
After the update, I dont have permission to use portsdb or pkgdb , even as
root. I tried a re-cvsup about 10 minutes ago...
Checkout ports/net/pythondirector/pkg-plist
Edit ports/sysutils/apachetop/Makefile
Add delta 1.8
On Thu, Feb 26, 2004 at 06:15:19PM -0500, Daniel Fisher wrote:
I just did a clean install of 5.2.1 and I'm having several problems.
1) processes are getting stuck in ttywri
They eventually finish running, but the machine will sit for several minutes
with no load.
2) I'm getting the
You are right, I have them setup originally under WinXP as partitions,
then added FreeBSD to the second partition where it calls it a slice.
Divided up the slice into the required folders. I have tested, and it is
not cosmetic, in that when I select that menu item, the computer goes to
the next
The second question I have, is can I put the command startx into my
rc.conf file to have it boot directly into the x-server? Any help on
these two would be awesome. Thanks.
I have not been successfule with that sort of thing. Anyway, I
don't think just putting it in rc.conf would do
On Thu, 26 Feb 2004 17:18:01 -0900, Mark Weisman [EMAIL PROTECTED] wrote:
Just out of curiosity what is the order in creating a dual boot system?
Which operating system do you put on first? I see that having WinXP
setup in partitions is not a good idea, yet I'm not aware of how to load
the system
I am currently playing with a toy app using divert and ipfw
on 5.2.1. One of the bits of info I am trying to get ahold of
is the rule number in ipfw that sent the diverted packet over to
me. The DIVERT(4) man page states:
Diverted packets may be read unaltered via read(2), recv(2),
FreeBSD 5.2-CURRENT #0: Wed Feb 18 00:02:18 EST 2004
x86
After building the xmms port I attempt to run xmms and get the following
error:-
Fatal error 'Spinlock called when not threaded.' at line 83 in file /usr/src/
lib/libpthread/thread/thr_spinlock.c (errno = 0)
Abort (core dumped)
I
On Thu, 26 Feb 2004 11:31:07 +0200
siraj kutlusan [EMAIL PROTECTED] wrote:
when will a stable version of the technology release of freebsd be
coming out?
http://www.freebsd.org/doc/en_US.ISO8859-1/articles/5-roadmap/schedule.html
-Chris
___
[EMAIL
On Fri, Feb 27, 2004 at 02:31:00PM +1100, bruno malag wrote:
FreeBSD 5.2-CURRENT #0: Wed Feb 18 00:02:18 EST 2004
x86
After building the xmms port I attempt to run xmms and get the following
error:-
Fatal error 'Spinlock called when not threaded.' at line 83 in file /usr/src/
hello all,
alas, i haven't yet found the solution via google or mozillazine.org.
here's the problem...
mozilla-gtk2
No running window found.
and nothing else happens. with firefox, it's even worse. i don't even get
the error message. just nada.
i suspect that it has something to do with
Its definetly ruby. Sorry for the long paste, but here is the 'script -a
file' before and after the update
darken# echo about to update ruby and I have access to
/usr/local/siESC[ESC[Kbin^M
about to update ruby and I have access to /usr/local/sbin
darken# cd /usr/local/sbin/^M
darken# pkgdb -uF^M
pkgdb is still looking for /usr/local/bin/ruby which after the upgrade
dosent exist. Its now /usr/local/bin/ruby16
ln -s /usr/local/bin/ruby16 /usr/local/bin/ruby
fixes pkgdb and portsdb
michael
___
[EMAIL PROTECTED] mailing list
I forgot, after the newfs I remount the slice before the dump command!
Quoting [EMAIL PROTECTED]:
Hello,
Im not a sysadmin but I wanted to share the configuration I use at home for
my
file server running on a small Epia mini-ITX fanless motherboard.
Basically the box only has 2x 120GB
Linux cp has a --link option that makes hard links instead of copies of
non-directories. The FreeBSD cp doesn't appear to have that option.
Is there a way of achieving this?
Tom Munro Glass
___
[EMAIL PROTECTED] mailing list
1 - 100 of 170 matches
Mail list logo